{"isEnabled":true,"series":{"id":120,"manufacturer_id":16,"name":"Mark VI IS200","page_name":"mark-vi-is200","description":"

In Stock
Ships Today
1-800-991-7026

International
1-919-372-8413

The GE General Electric Mark VI Speedtronic Turbine Control System is the current state-of-the-art control for GE Turbines. It is a complete integrated control system with protection and monitorin for generator and mechanical drive applications of gas and steam turbines.

","content":null,"meta_title":"GE General Electric Power Systems Speedtronic Mark VI Turbine Control System Mark 6","meta_description":"GE General Electric Power Systems Speedtronic Mark VI Turbine Control System Mark 6","keywords":"GE, General Electric, Power Systems, Speedtronic, Mark VI, Turbine Control System, Mark 6","display_order":2,"is_active":1,"created_at":null,"updated_at":null,"product_type_id":null,"manufacturer":{"id":16,"name":"GE Boards & Turbine Control ","page_name":"ge-boards","logo":"","description":"","content":null,"meta_title":"GE General Electric Drive and Speedtronic Mark IV Mark V Boards.","meta_description":"GE General Electric Drive and Speedtronic Mark IV Mark V Boards.","keywords":"GE, General Electric, Drive and Speedtronic, Mark IV, Mark V, Boards.","display_order":1,"is_active":1,"created_at":null,"updated_at":null},"images":[{"id":52,"series_id":120,"image_id":32788,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":53,"series_id":120,"image_id":32790,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":54,"series_id":120,"image_id":32792,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":55,"series_id":120,"image_id":32794,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":56,"series_id":120,"image_id":32796,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":57,"series_id":120,"image_id":32798,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":58,"series_id":120,"image_id":32800,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":59,"series_id":120,"image_id":32802,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":60,"series_id":120,"image_id":32804,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":61,"series_id":120,"image_id":32806,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":62,"series_id":120,"image_id":32808,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":63,"series_id":120,"image_id":32810,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":64,"series_id":120,"image_id":32812,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":65,"series_id":120,"image_id":32814,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":66,"series_id":120,"image_id":32816,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":67,"series_id":120,"image_id":32818,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":68,"series_id":120,"image_id":32820,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":69,"series_id":120,"image_id":32822,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":70,"series_id":120,"image_id":32828,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":71,"series_id":120,"image_id":32830,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":72,"series_id":120,"image_id":32832,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":73,"series_id":120,"image_id":32834,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":74,"series_id":120,"image_id":32836,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":75,"series_id":120,"image_id":32838,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":76,"series_id":120,"image_id":32840,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":77,"series_id":120,"image_id":32842,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":78,"series_id":120,"image_id":32844,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":79,"series_id":120,"image_id":32846,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":80,"series_id":120,"image_id":32848,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":81,"series_id":120,"image_id":32850,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":82,"series_id":120,"image_id":32852,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":83,"series_id":120,"image_id":32854,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":84,"series_id":120,"image_id":32856,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":85,"series_id":120,"image_id":32858,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":86,"series_id":120,"image_id":32860,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":87,"series_id":120,"image_id":32862,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":88,"series_id":120,"image_id":32864,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":89,"series_id":120,"image_id":32866,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":90,"series_id":120,"image_id":32868,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":91,"series_id":120,"image_id":32870,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":92,"series_id":120,"image_id":32872,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":93,"series_id":120,"image_id":32878,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":94,"series_id":120,"image_id":32880,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":95,"series_id":120,"image_id":32882,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":96,"series_id":120,"image_id":32884,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":97,"series_id":120,"image_id":32894,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":98,"series_id":120,"image_id":32896,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":99,"series_id":120,"image_id":32898,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":100,"series_id":120,"image_id":32900,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":101,"series_id":120,"image_id":32902,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":102,"series_id":120,"image_id":32904,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":103,"series_id":120,"image_id":32906,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":104,"series_id":120,"image_id":32908,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":105,"series_id":120,"image_id":32914,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":106,"series_id":120,"image_id":32916,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":107,"series_id":120,"image_id":32918,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":108,"series_id":120,"image_id":32920,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":109,"series_id":120,"image_id":32926,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":110,"series_id":120,"image_id":32928,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":111,"series_id":120,"image_id":32930,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":112,"series_id":120,"image_id":32932,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":113,"series_id":120,"image_id":32934,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":114,"series_id":120,"image_id":32936,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":115,"series_id":120,"image_id":32940,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":116,"series_id":120,"image_id":32942,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":117,"series_id":120,"image_id":32944,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":118,"series_id":120,"image_id":32950,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":119,"series_id":120,"image_id":32952,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":120,"series_id":120,"image_id":32954,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":121,"series_id":120,"image_id":32956,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":122,"series_id":120,"image_id":32958,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":123,"series_id":120,"image_id":32960,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":124,"series_id":120,"image_id":32962,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":125,"series_id":120,"image_id":32964,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":126,"series_id":120,"image_id":32966,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":127,"series_id":120,"image_id":32968,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":128,"series_id":120,"image_id":32970,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":129,"series_id":120,"image_id":32972,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":130,"series_id":120,"image_id":32974,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":131,"series_id":120,"image_id":32976,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":132,"series_id":120,"image_id":32978,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":133,"series_id":120,"image_id":32980,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":134,"series_id":120,"image_id":32982,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":135,"series_id":120,"image_id":32984,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":136,"series_id":120,"image_id":32986,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":137,"series_id":120,"image_id":32988,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":138,"series_id":120,"image_id":32990,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":139,"series_id":120,"image_id":32992,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":140,"series_id":120,"image_id":32994,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":141,"series_id":120,"image_id":32996,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":142,"series_id":120,"image_id":32998,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":143,"series_id":120,"image_id":33000,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":144,"series_id":120,"image_id":33004,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":145,"series_id":120,"image_id":33006,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":146,"series_id":120,"image_id":33008,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":147,"series_id":120,"image_id":33010,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":148,"series_id":120,"image_id":33012,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":149,"series_id":120,"image_id":33014,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":150,"series_id":120,"image_id":33016,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":151,"series_id":120,"image_id":33018,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":152,"series_id":120,"image_id":33020,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":153,"series_id":120,"image_id":33022,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":154,"series_id":120,"image_id":33024,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":155,"series_id":120,"image_id":33026,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":156,"series_id":120,"image_id":33028,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":157,"series_id":120,"image_id":33030,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":158,"series_id":120,"image_id":33032,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":159,"series_id":120,"image_id":33034,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":160,"series_id":120,"image_id":33036,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":161,"series_id":120,"image_id":33038,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":162,"series_id":120,"image_id":33040,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":163,"series_id":120,"image_id":33042,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":164,"series_id":120,"image_id":33044,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":165,"series_id":120,"image_id":33046,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":166,"series_id":120,"image_id":33048,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":167,"series_id":120,"image_id":33054,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":168,"series_id":120,"image_id":33056,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":169,"series_id":120,"image_id":33058,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":170,"series_id":120,"image_id":33060,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":171,"series_id":120,"image_id":33062,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":172,"series_id":120,"image_id":33064,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":173,"series_id":120,"image_id":33070,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":174,"series_id":120,"image_id":33072,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":175,"series_id":120,"image_id":33074,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":176,"series_id":120,"image_id":33076,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":177,"series_id":120,"image_id":33078,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":178,"series_id":120,"image_id":33080,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":179,"series_id":120,"image_id":33086,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":180,"series_id":120,"image_id":33088,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":181,"series_id":120,"image_id":33090,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":182,"series_id":120,"image_id":33092,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":183,"series_id":120,"image_id":33094,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":184,"series_id":120,"image_id":33096,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":185,"series_id":120,"image_id":33098,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":186,"series_id":120,"image_id":33100,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":187,"series_id":120,"image_id":33106,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":188,"series_id":120,"image_id":33108,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":189,"series_id":120,"image_id":33110,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":190,"series_id":120,"image_id":33112,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":191,"series_id":120,"image_id":33114,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":192,"series_id":120,"image_id":33116,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":193,"series_id":120,"image_id":33118,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":194,"series_id":120,"image_id":33120,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":195,"series_id":120,"image_id":33122,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":196,"series_id":120,"image_id":33124,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":197,"series_id":120,"image_id":33126,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":198,"series_id":120,"image_id":33128,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":199,"series_id":120,"image_id":33130,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":200,"series_id":120,"image_id":33132,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":201,"series_id":120,"image_id":33134,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":202,"series_id":120,"image_id":33136,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":203,"series_id":120,"image_id":33138,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":204,"series_id":120,"image_id":33140,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":205,"series_id":120,"image_id":33142,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":206,"series_id":120,"image_id":33144,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":207,"series_id":120,"image_id":33146,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":208,"series_id":120,"image_id":33148,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":209,"series_id":120,"image_id":33150,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":210,"series_id":120,"image_id":33152,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":211,"series_id":120,"image_id":33154,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":212,"series_id":120,"image_id":33156,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":213,"series_id":120,"image_id":33158,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":214,"series_id":120,"image_id":33160,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":215,"series_id":120,"image_id":33162,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":216,"series_id":120,"image_id":33168,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":217,"series_id":120,"image_id":33170,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":218,"series_id":120,"image_id":33174,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":219,"series_id":120,"image_id":33178,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":220,"series_id":120,"image_id":33180,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":221,"series_id":120,"image_id":33182,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":222,"series_id":120,"image_id":33184,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":223,"series_id":120,"image_id":33186,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":224,"series_id":120,"image_id":33188,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":225,"series_id":120,"image_id":33190,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":226,"series_id":120,"image_id":33192,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":227,"series_id":120,"image_id":33194,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":228,"series_id":120,"image_id":33196,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":229,"series_id":120,"image_id":33198,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":230,"series_id":120,"image_id":33200,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":231,"series_id":120,"image_id":33204,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":232,"series_id":120,"image_id":33206,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":233,"series_id":120,"image_id":33208,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":234,"series_id":120,"image_id":33212,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":235,"series_id":120,"image_id":33214,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":236,"series_id":120,"image_id":33216,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":237,"series_id":120,"image_id":33218,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":238,"series_id":120,"image_id":33220,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":239,"series_id":120,"image_id":33222,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":240,"series_id":120,"image_id":33224,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":241,"series_id":120,"image_id":33226,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":242,"series_id":120,"image_id":33228,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":243,"series_id":120,"image_id":33230,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":244,"series_id":120,"image_id":33232,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":245,"series_id":120,"image_id":33234,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":246,"series_id":120,"image_id":33236,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":247,"series_id":120,"image_id":33238,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":248,"series_id":120,"image_id":33240,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":249,"series_id":120,"image_id":33242,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":250,"series_id":120,"image_id":33244,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":251,"series_id":120,"image_id":33246,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":252,"series_id":120,"image_id":33248,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":253,"series_id":120,"image_id":33250,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":254,"series_id":120,"image_id":33252,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":255,"series_id":120,"image_id":33254,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":256,"series_id":120,"image_id":33256,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":257,"series_id":120,"image_id":33258,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":258,"series_id":120,"image_id":33260,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":259,"series_id":120,"image_id":33262,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":260,"series_id":120,"image_id":33264,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":261,"series_id":120,"image_id":33266,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":262,"series_id":120,"image_id":33270,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":263,"series_id":120,"image_id":33272,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":264,"series_id":120,"image_id":33274,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":265,"series_id":120,"image_id":33276,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":266,"series_id":120,"image_id":33278,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":267,"series_id":120,"image_id":33282,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":268,"series_id":120,"image_id":33284,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":269,"series_id":120,"image_id":33286,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":270,"series_id":120,"image_id":33288,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":271,"series_id":120,"image_id":33290,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":272,"series_id":120,"image_id":33292,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":273,"series_id":120,"image_id":33294,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":274,"series_id":120,"image_id":33296,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":275,"series_id":120,"image_id":33298,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":276,"series_id":120,"image_id":33300,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":277,"series_id":120,"image_id":33302,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":278,"series_id":120,"image_id":33304,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":279,"series_id":120,"image_id":33306,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":280,"series_id":120,"image_id":33310,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":281,"series_id":120,"image_id":33312,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":282,"series_id":120,"image_id":33314,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":283,"series_id":120,"image_id":33316,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":284,"series_id":120,"image_id":33318,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":285,"series_id":120,"image_id":33320,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":286,"series_id":120,"image_id":33322,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":287,"series_id":120,"image_id":33324,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":288,"series_id":120,"image_id":33326,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":289,"series_id":120,"image_id":33328,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":290,"series_id":120,"image_id":33330,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":291,"series_id":120,"image_id":33332,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":292,"series_id":120,"image_id":33334,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":293,"series_id":120,"image_id":33336,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":294,"series_id":120,"image_id":33338,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":295,"series_id":120,"image_id":33340,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":296,"series_id":120,"image_id":33342,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":297,"series_id":120,"image_id":33344,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":298,"series_id":120,"image_id":33346,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":299,"series_id":120,"image_id":33348,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":300,"series_id":120,"image_id":33350,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":301,"series_id":120,"image_id":33352,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":302,"series_id":120,"image_id":33354,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":303,"series_id":120,"image_id":33356,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":304,"series_id":120,"image_id":33358,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":305,"series_id":120,"image_id":33360,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":306,"series_id":120,"image_id":33362,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":307,"series_id":120,"image_id":33364,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":308,"series_id":120,"image_id":33366,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":309,"series_id":120,"image_id":33368,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":310,"series_id":120,"image_id":33370,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":311,"series_id":120,"image_id":33372,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":312,"series_id":120,"image_id":33374,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":313,"series_id":120,"image_id":33376,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":314,"series_id":120,"image_id":33378,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":315,"series_id":120,"image_id":33380,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":316,"series_id":120,"image_id":33382,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":317,"series_id":120,"image_id":33384,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":318,"series_id":120,"image_id":33386,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":319,"series_id":120,"image_id":33388,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":320,"series_id":120,"image_id":33390,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":321,"series_id":120,"image_id":33392,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":322,"series_id":120,"image_id":33394,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":323,"series_id":120,"image_id":33396,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":324,"series_id":120,"image_id":33398,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":325,"series_id":120,"image_id":33400,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":326,"series_id":120,"image_id":33402,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":327,"series_id":120,"image_id":33404,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":328,"series_id":120,"image_id":33408,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":329,"series_id":120,"image_id":33410,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":330,"series_id":120,"image_id":33412,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":331,"series_id":120,"image_id":33414,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":332,"series_id":120,"image_id":33416,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":333,"series_id":120,"image_id":33418,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":334,"series_id":120,"image_id":33420,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":335,"series_id":120,"image_id":33422,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":336,"series_id":120,"image_id":33424,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":337,"series_id":120,"image_id":33426,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":338,"series_id":120,"image_id":33428,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":339,"series_id":120,"image_id":33430,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":340,"series_id":120,"image_id":33432,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":341,"series_id":120,"image_id":33434,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":342,"series_id":120,"image_id":33440,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":343,"series_id":120,"image_id":33442,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":344,"series_id":120,"image_id":33444,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":345,"series_id":120,"image_id":33446,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":346,"series_id":120,"image_id":33448,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":347,"series_id":120,"image_id":33450,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":348,"series_id":120,"image_id":33452,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":349,"series_id":120,"image_id":33454,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":350,"series_id":120,"image_id":33456,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":351,"series_id":120,"image_id":33458,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":352,"series_id":120,"image_id":33460,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":353,"series_id":120,"image_id":33462,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":354,"series_id":120,"image_id":33464,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":355,"series_id":120,"image_id":33466,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":356,"series_id":120,"image_id":33468,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":357,"series_id":120,"image_id":33470,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":358,"series_id":120,"image_id":33472,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":359,"series_id":120,"image_id":33474,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":360,"series_id":120,"image_id":33476,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":361,"series_id":120,"image_id":33478,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":362,"series_id":120,"image_id":33480,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":363,"series_id":120,"image_id":33482,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":364,"series_id":120,"image_id":33484,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":365,"series_id":120,"image_id":33486,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":366,"series_id":120,"image_id":33488,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":367,"series_id":120,"image_id":33490,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":368,"series_id":120,"image_id":33492,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":369,"series_id":120,"image_id":33496,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":370,"series_id":120,"image_id":33498,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":371,"series_id":120,"image_id":33500,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":372,"series_id":120,"image_id":33502,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":373,"series_id":120,"image_id":33504,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":374,"series_id":120,"image_id":33506,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":375,"series_id":120,"image_id":33508,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":376,"series_id":120,"image_id":33510,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":377,"series_id":120,"image_id":33512,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":378,"series_id":120,"image_id":33514,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":379,"series_id":120,"image_id":33516,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":380,"series_id":120,"image_id":33518,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":381,"series_id":120,"image_id":33520,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":382,"series_id":120,"image_id":33522,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":383,"series_id":120,"image_id":33524,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":384,"series_id":120,"image_id":33526,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":385,"series_id":120,"image_id":33528,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":386,"series_id":120,"image_id":33530,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":387,"series_id":120,"image_id":33532,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":388,"series_id":120,"image_id":33534,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":389,"series_id":120,"image_id":33536,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":390,"series_id":120,"image_id":33538,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":391,"series_id":120,"image_id":33540,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":392,"series_id":120,"image_id":33542,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":393,"series_id":120,"image_id":33544,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":394,"series_id":120,"image_id":33546,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":395,"series_id":120,"image_id":33548,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":396,"series_id":120,"image_id":33550,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":397,"series_id":120,"image_id":33556,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":398,"series_id":120,"image_id":33558,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":399,"series_id":120,"image_id":33564,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":400,"series_id":120,"image_id":33566,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":401,"series_id":120,"image_id":33568,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":402,"series_id":120,"image_id":33570,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":403,"series_id":120,"image_id":33572,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":404,"series_id":120,"image_id":33574,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":405,"series_id":120,"image_id":33576,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":406,"series_id":120,"image_id":33578,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":407,"series_id":120,"image_id":33580,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":408,"series_id":120,"image_id":33582,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":409,"series_id":120,"image_id":33584,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":410,"series_id":120,"image_id":33586,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":411,"series_id":120,"image_id":33588,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":412,"series_id":120,"image_id":33590,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":413,"series_id":120,"image_id":33592,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":414,"series_id":120,"image_id":33594,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":415,"series_id":120,"image_id":33596,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":416,"series_id":120,"image_id":33598,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":417,"series_id":120,"image_id":33600,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":418,"series_id":120,"image_id":33602,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":419,"series_id":120,"image_id":33604,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":420,"series_id":120,"image_id":33606,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":421,"series_id":120,"image_id":33608,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":422,"series_id":120,"image_id":33610,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":423,"series_id":120,"image_id":33612,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":424,"series_id":120,"image_id":33614,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":425,"series_id":120,"image_id":33616,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":426,"series_id":120,"image_id":33618,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":427,"series_id":120,"image_id":33628,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":428,"series_id":120,"image_id":33630,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":429,"series_id":120,"image_id":33632,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":430,"series_id":120,"image_id":33634,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":431,"series_id":120,"image_id":33636,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":432,"series_id":120,"image_id":33638,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":433,"series_id":120,"image_id":33640,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":434,"series_id":120,"image_id":33642,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":435,"series_id":120,"image_id":33644,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":436,"series_id":120,"image_id":33646,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":437,"series_id":120,"image_id":33648,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":438,"series_id":120,"image_id":33650,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":439,"series_id":120,"image_id":33652,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":440,"series_id":120,"image_id":33654,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":441,"series_id":120,"image_id":33656,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":442,"series_id":120,"image_id":33658,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":443,"series_id":120,"image_id":33660,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":444,"series_id":120,"image_id":33662,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":445,"series_id":120,"image_id":33664,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":446,"series_id":120,"image_id":33666,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":447,"series_id":120,"image_id":33668,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":448,"series_id":120,"image_id":33672,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":449,"series_id":120,"image_id":33674,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":450,"series_id":120,"image_id":33676,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":451,"series_id":120,"image_id":33678,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":452,"series_id":120,"image_id":33680,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":453,"series_id":120,"image_id":33682,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":454,"series_id":120,"image_id":33684,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":455,"series_id":120,"image_id":33686,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":456,"series_id":120,"image_id":33688,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":457,"series_id":120,"image_id":33690,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":458,"series_id":120,"image_id":33692,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":459,"series_id":120,"image_id":33694,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":460,"series_id":120,"image_id":33696,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":461,"series_id":120,"image_id":33698,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":462,"series_id":120,"image_id":33700,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":463,"series_id":120,"image_id":33702,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":464,"series_id":120,"image_id":33704,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":465,"series_id":120,"image_id":33706,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":466,"series_id":120,"image_id":33708,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":467,"series_id":120,"image_id":33710,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":468,"series_id":120,"image_id":33712,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":469,"series_id":120,"image_id":33714,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":470,"series_id":120,"image_id":33716,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":471,"series_id":120,"image_id":33718,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":472,"series_id":120,"image_id":33720,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":473,"series_id":120,"image_id":33722,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":474,"series_id":120,"image_id":33724,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":475,"series_id":120,"image_id":33726,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":476,"series_id":120,"image_id":33728,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":477,"series_id":120,"image_id":33730,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":478,"series_id":120,"image_id":33732,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":479,"series_id":120,"image_id":33734,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":480,"series_id":120,"image_id":33736,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":481,"series_id":120,"image_id":33738,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":482,"series_id":120,"image_id":33740,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":483,"series_id":120,"image_id":33742,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":484,"series_id":120,"image_id":33744,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":485,"series_id":120,"image_id":33746,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":486,"series_id":120,"image_id":33750,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":487,"series_id":120,"image_id":33752,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":488,"series_id":120,"image_id":33754,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":489,"series_id":120,"image_id":33756,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":490,"series_id":120,"image_id":33758,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":491,"series_id":120,"image_id":33760,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":492,"series_id":120,"image_id":33762,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":493,"series_id":120,"image_id":33764,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":494,"series_id":120,"image_id":33766,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":495,"series_id":120,"image_id":33768,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":496,"series_id":120,"image_id":33770,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":497,"series_id":120,"image_id":33772,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":498,"series_id":120,"image_id":33774,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":499,"series_id":120,"image_id":33776,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":500,"series_id":120,"image_id":33778,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":501,"series_id":120,"image_id":33780,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":502,"series_id":120,"image_id":33782,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":503,"series_id":120,"image_id":33784,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":504,"series_id":120,"image_id":33786,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":505,"series_id":120,"image_id":33788,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":506,"series_id":120,"image_id":33790,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":507,"series_id":120,"image_id":33792,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":508,"series_id":120,"image_id":33794,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":509,"series_id":120,"image_id":33796,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":510,"series_id":120,"image_id":33798,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":511,"series_id":120,"image_id":33800,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":512,"series_id":120,"image_id":33802,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":513,"series_id":120,"image_id":33804,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":514,"series_id":120,"image_id":33806,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":515,"series_id":120,"image_id":33808,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":516,"series_id":120,"image_id":33810,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":517,"series_id":120,"image_id":33812,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":518,"series_id":120,"image_id":33814,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":519,"series_id":120,"image_id":33816,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":520,"series_id":120,"image_id":33818,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":521,"series_id":120,"image_id":33820,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":522,"series_id":120,"image_id":33822,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":523,"series_id":120,"image_id":33824,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":524,"series_id":120,"image_id":33826,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":525,"series_id":120,"image_id":33828,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":526,"series_id":120,"image_id":33830,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":527,"series_id":120,"image_id":33832,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":528,"series_id":120,"image_id":33834,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":529,"series_id":120,"image_id":33836,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":530,"series_id":120,"image_id":33838,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":531,"series_id":120,"image_id":33840,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":532,"series_id":120,"image_id":33842,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":533,"series_id":120,"image_id":33844,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":534,"series_id":120,"image_id":33846,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":535,"series_id":120,"image_id":33852,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":536,"series_id":120,"image_id":33854,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":537,"series_id":120,"image_id":33856,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":538,"series_id":120,"image_id":33858,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":539,"series_id":120,"image_id":33860,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":540,"series_id":120,"image_id":33862,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":541,"series_id":120,"image_id":33864,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":542,"series_id":120,"image_id":33866,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":543,"series_id":120,"image_id":33868,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":544,"series_id":120,"image_id":33870,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":545,"series_id":120,"image_id":33872,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":546,"series_id":120,"image_id":33874,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":547,"series_id":120,"image_id":33876,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":548,"series_id":120,"image_id":33884,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":549,"series_id":120,"image_id":33886,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":550,"series_id":120,"image_id":33888,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":551,"series_id":120,"image_id":33890,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":552,"series_id":120,"image_id":33892,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":553,"series_id":120,"image_id":33894,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":554,"series_id":120,"image_id":33896,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":555,"series_id":120,"image_id":33898,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":556,"series_id":120,"image_id":33900,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":557,"series_id":120,"image_id":33902,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":558,"series_id":120,"image_id":33904,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":559,"series_id":120,"image_id":33906,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":560,"series_id":120,"image_id":33908,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":561,"series_id":120,"image_id":33910,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":562,"series_id":120,"image_id":33912,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":563,"series_id":120,"image_id":33914,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":564,"series_id":120,"image_id":33918,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":565,"series_id":120,"image_id":33920,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":566,"series_id":120,"image_id":33922,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":567,"series_id":120,"image_id":33924,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":568,"series_id":120,"image_id":33926,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":569,"series_id":120,"image_id":33928,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":570,"series_id":120,"image_id":33930,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":571,"series_id":120,"image_id":33932,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":572,"series_id":120,"image_id":33934,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":573,"series_id":120,"image_id":33936,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":574,"series_id":120,"image_id":35072,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":575,"series_id":120,"image_id":35158,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":576,"series_id":120,"image_id":35280,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":577,"series_id":120,"image_id":35282,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":578,"series_id":120,"image_id":35304,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":579,"series_id":120,"image_id":35306,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":580,"series_id":120,"image_id":41875,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":581,"series_id":120,"image_id":41877,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":582,"series_id":120,"image_id":41882,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null},{"id":583,"series_id":120,"image_id":42509,"image_type_id":3,"name":"ge-mark-vi.jpg","is_active":1,"created_at":null,"updated_at":null}]},"products":[{"id":14471,"part_number":"IS200ACLEH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI ACLE CARRIER Card","short_desc":"The IS200ACLEH1 is a GE printed circuit board","content":"

The IS200ACLEH1 is a GE PCB component designed for the Mark VI series. The Mark VI is part of the Speedtronic family of gas/steam turbine management systems. The Speedtronic series has been under development by General Electric since they first released the Mark I series in the late 1960s. The Mark VI is designed to be used in a variety of applications and includes a large number of cards designed for direct interface to unique actuators and sensors.

The IS200ACLEH1 is built with a narrow faceplate that includes the board number and the manufacturer logo. Several components have been mounted directly into the faceplate, including two multi-pin connectors. All components are wired into the circuit board.

The IS200ACLEH1 board is marked with the code 6BA01. It also carries the manufacturer logo and the board number. Most components carry a reference designator.

The IS200ACLEH1 has a backplane connector located along the back edge. This is marked P1. There is also a male vertical pin connector located in the upper right corner. Below this connector the board is populated with a IDE to SATA adapter. This holds a 128 mb card.

The middle of the IS200ACLEH1 is populated by an auxiliary board with various components, including several pin connectors. This board connects to the main board using a ribbon cable connector.

The AX Control team will pack the IS200ACLEH1 using proper techniques, including using an antistatic wrapping to protect from damage during transit. We recommend the use of a grounding strap during the unboxing process. Please follow manufacturer recommended procedures for installation as stated in manuals/data sheets.

","meta_title":"GE Mark VI ACLE CARRIER Card","meta_description":"GE Mark VI ACLE CARRIER Card","keywords":"GE Mark VI ACLE CARRIER Card","series_page_description":"GE Mark VI ACLE CARRIER Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 10:01:54","prod_pdf":[]},{"id":14472,"part_number":"IS200ACLEH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EX2100 CARRIER ACLE CARD MARK VI GE","short_desc":"The IS200ACLEH1A is a GE Mark VI Speedtronic Control Card Mark 6 Cimplicity","content":"

The IS200ACLEH1A is a GE PCB created for use in the Mark VI series. The Mark VI is part of the long-running Speedtronic series that has been created by GE for the management of gas and steam turbines. The Speedtronic series has been through several versions, starting with the Mark I that was released in the late 1960s. The Mark VI includes such features as a PC-based operator interface that has been loaded with proprietary software like CIMPLICITY graphics and the GE Control System Toolbox that is used for maintenance.

The IS200ACLEH1A has a narrow faceplate that is printed with the manufacturer logo and the board number. Several board components have been mounted to one edge of the faceplate. This includes two multi-pin connectors.

The board component of the IS200ACLEH1A is also marked with the board number and the GE logo. It has the code 6BA01 printed along one edge. Components tend to be identified by reference designators.

The IS200ACLEH1A has several board connectors, including a vertical male pin connector in the upper right-hand corner, a backplane connector placed on the back edge of the board, and a multi-pin ribbon cable connector. The ribbon connector links to an auxiliary board that populates the majority of the middle of the board. This auxiliary board has a number of components, including multiple pin connectors and integrated circuits. The primary board also has an IDE to SATA converter that holds a 128 MB card.

The IS200ACLEH1A will be packed to avoid damage during transit, including the use of an antistatic sleeve to protect from static discharge. Manuals/datasheets from the manufacturer will provide the user with proper installation procedures.

","meta_title":"EX2100 CARRIER ACLE CARD MARK VI GE","meta_description":"EX2100 CARRIER ACLE CARD MARK VI GE","keywords":"EX2100 CARRIER ACLE CARD MARK VI GE","series_page_description":"EX2100 CARRIER ACLE CARD MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:13:22","prod_pdf":[]},{"id":53361,"part_number":"IS200ACLEH1BCB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200ACLEH1BCB is a PCB for use in the GE Mark VI Speedtronic Series. Several board components have been mounted to the edge of the face plate, including two multi-pin connectors.","short_desc":"Mark VI (Mark 6) Speedtronic Control card with CIMPLICITY graphics","content":"

The IS200ACLEH1BCB was a General Electric PCB (the Mark VI) fashioned to be used in the detailed management of steam and gas-powered turbines. The Mark VI was a part of the multi-decade long-running Speedtronic product that was crafted by GE. The Speedtronic series went through quite a few forms, opening with the Mark I which debuted in 1969. The Mark VI included things like a PC-based operator interface which was loaded with brand-exclusive software such as CIMPLICITY graphics and the GE Control System Toolbox (which was used for upkeep).

The IS200ACLEH1BCB had a thin faceplate which displayed the printed GE logo and the board ID number. Several board apparatuses were mounted to a single edge of the faceplate. This included multi-pin connectors. The board, itself, was also marked with an identification number and the manufacturing logo. It displayed the code 6BA01 along one edge of the device. Components tend to be identified by reference numbers.

The IS200ACLEH1BCB had many board connections, including a vertical male pin in the uppermost right corner, a backplane connector located on the posterior edge on the board, and a multi-pin ribbon cable connector. The ribbon connections linked to a secondary board which populated most of the center on the board. This secondary board had a few components, which included multiple pin integrated circuits and connectors. The principal board had an IDE to SATA converter that held a 128 MB memory card.

The IS200ACLEH1BCB will be packaged by AX Control to protect it from static discharge using an antistatic sleeve, thereby avoiding damage during transit. Datasheets and Manuals created by the manufacturer should provide the handler with correct installation measures.

","meta_title":"The GE IS200ACLEH1BCB is a PCB for use in the GE Mark VI Speedtronic Series. Several board components have been mounted to the edge of the face plate, including two multi-pin connectors.","meta_description":"The GE IS200ACLEH1BCB is a PCB for use in the GE Mark VI Speedtronic Series. Several board components have been mounted to the edge of the face plate, including two multi-pin connectors.","keywords":"["The GE IS200ACLEH1BCB is a PCB for use in the GE Mark VI Speedtronic Series. Several board components have been mounted to the edge of the face plate","including two multi-pin connectors."]","series_page_description":"The GE IS200ACLEH1BCB is a PCB for use in the GE Mark VI Speedtronic Series. Several board components have been mounted to the edge of the face plate, including two multi-pin connectors.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-08-15 15:35:49","updated_at":"2020-01-29 16:14:47","prod_pdf":[]},{"id":15019,"part_number":"IS200ADIIH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"I/O DUAL CHANNEL BOARD GENERAL ELECTRIC INPUT OUTPUT MODULE IS200ADIIH1 AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","short_desc":"The IS200ADIIH1 is a GE printed circuit board","content":"

The IS200ADIIH1 is a printed circuit board manufactured by GE for the Mark VI series. The Mark VI is one of the later of the successful Speedtronic systems for gas and steam turbine management developed by General Electric. Speedtronic systems have been used to manage heavy duty turbine systems since the 1960s, with more efficient and technologically advanced systems being released over time.

The IS200ADIIH1 functions as an Auxiliary ISBus, or Innovation Series Bus, Interface board, that interfaces an AcDc2000 drive to an ISBus LAN, or Local Area Network. It is important to note that this board can only be used in AcDc2000 drives that also have the LDCC board, as configuration of the interface is done with the keypad located on the LDCC board or with the GE Control System Toolbox.

The IS200ADIIH1 interfaces to the ISBus through two connectors, located at P2 (TX/out) and P3 (Rx/in.) All board configuration parameters are stored in the drive and can be modified using the toolbox or the drive’s keypad. The IS200ADIIH1 has no fuses or hardware jumpers. The board does have LED indicators and seven TP test points for setup and diagnostic purposes.

It is important to treat the IS200ADIIH1 at all times with static sensitive handling techniques. Technicians should wear a wrist grounding strap when handling components or the board (only after the board has been removed from energized equipment.) AX Control will ship the IS200ADIIH1 using an anti-static covering, to prevent component damage from static electricity during transit.

","meta_title":"I/O DUAL CHANNEL BOARD GENERAL ELECTRIC INPUT OUTPUT MODULE IS200ADIIH1 AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","meta_description":"I/O DUAL CHANNEL BOARD GENERAL ELECTRIC INPUT OUTPUT MODULE IS200ADIIH1 AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","keywords":"I/O DUAL CHANNEL BOARD GENERAL ELECTRIC INPUT OUTPUT MODULE IS200ADIIH1 AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","series_page_description":"I/O DUAL CHANNEL BOARD GENERAL ELECTRIC INPUT OUTPUT MODULE IS200ADIIH1 AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 08:31:16","prod_pdf":[]},{"id":15020,"part_number":"IS200ADIIH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DUAL CHANNEL DUAL PORT INPUT OUTPUT MODULE GE MARK VI","short_desc":"IS200ADIIH1A GE Mark VI (Mark 6) Control Card Gas Turbine Control","content":"

The IS200ADIIH1A is a PCB component manufactured by General Electric for their Mark VI series. The MKVI is one of the most advanced of the successful Speedtronic steam/gas turbine management systems created by GE. The MKVI has a control system that comes loaded with software specific to its application to gas, steam and land-marine aeroderivative (LM) or balance of plant (BOP) products that can execute up to 100,000 rungs or blocks per second.

The IS200ADIIH1A is designed to function as an Auxiliary Drive to ISBus Interface Board. It must be noted this circuit board may only be used in AcDc2000 drives where an LDCC board is also present; the configuration of the IS200ADIIH1A interface is done using the keypad located on the LDCC board, or may also be done using the GE Control System Toolbox. The IS200ADIIH1A cannot be used with previous LAN communication boards and design drive control.

The IS200ADIIH1A has one controller, designated drop 0, and no more than 31 nodes. A stream of bytes containing each ISBus node’s references begins at the master and daisy-chains through each node. As the information is passed along, the nodes substitute their feedback data in place of their reference data. When the stream returns to the master it contains feedback data from every node. The ISBus frame rate can be programmed to 1ms, 2ms, 4ms or 8ms.

The IS200ADIIH1A is built without hardware jumpers or fuses. The board includes seven TP test points for diagnostic or setup purposes. Refer to GE publication GEI-100305 for more information.

","meta_title":"DUAL CHANNEL DUAL PORT INPUT OUTPUT MODULE GE MARK VI","meta_description":"DUAL CHANNEL DUAL PORT INPUT OUTPUT MODULE GE MARK VI","keywords":null,"series_page_description":"DUAL CHANNEL DUAL PORT INPUT OUTPUT MODULE GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:16:20","prod_pdf":[]},{"id":15021,"part_number":"IS200ADIIH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IS200ADIIH1AAA AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","short_desc":"IS200ADIIH1AAA GE Mark 6 (Mark VI) Gas Turbine Control","content":"

The IS200ADIIH1AAA is a circuit board component designed by GE for the Mark VI system. The MKVI is one of the newest gas/steam turbine management systems from the Speedtronic series. GE started developing the Speedtronic series in the 1960s. The MKVI is one of the last and most technologically advanced of all these systems.

The IS200ADIIH1AAA is an Auxiliary Interface Board to interface an ISBUS Local Area Network (LAN) to the AcDc2000 drive. If the drive has been powered down, this board has a bypass relay to maintain the ISBus electrical continuity. It is worth noting the IS200ADIIH1AAA can only be used in AcDc2000 drives that also have an LDCC board.

The IS200ADIIH1AAA has configuration parameters that are stored on the drive and are loaded when the drive is reset or powered up. These parameters may be modified using the GE Control System toolbox ur using the keypad attached to the drive. The board is built without fuses or jumpers. It is built with seven TP test points and LED indicators that are both used for diagnostic purposes. The board has two stab-on connectors and four plug connectors. The use of these connectors can be found in GE publication GEI-100305.

The IS200ADIIH1AAA should always be handled with static sensitive techniques. Technicians should use a grounding strap when handling board components or boards. Our team at the AX Control warehouse will use anti-static materials to protect the drive during shipment.

Our company maintains relationships with multiple shipping companies and offers many shipping options. Please discuss your shipping needs with your sales representative so we can better serve you.

","meta_title":"IS200ADIIH1AAA AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","meta_description":"IS200ADIIH1AAA AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","keywords":null,"series_page_description":"IS200ADIIH1AAA AUXILIARY DRIVE TO ISBUS INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:16:58","prod_pdf":[]},{"id":53538,"part_number":"IS200AEAAH1A","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200AEAAH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200AEAAH1A was manufactured and designed by General Electric as a part of their Speedtronic series. This board was a part of the Mark VI series, which was one of the later Speedtronic systems that offered triple modular redundant control with a Windows-based operating system pre-loaded with proprietary software like CIMPLICITY and the GE Control System Toolbox.

The IS200AEAAH1A is designed with a large number of surface-mounted components. The board has multiple connectors on its surface including three terminal strips that are placed parallel to each other. Each of these strips has twelve individual connectors. The board also has sixteen stab-on connectors, a three-pin male vertical plug, and a two-position vertical female plug. Additionally, there is a right-angled connector along one short edge.

Other components include eight relays that have been grouped together in groups of four. Next to these are two heat sinks and three wire-wound resistors. The board also uses metal film resistors and other resistors, capacitors, and diodes, as well as over forty integrated circuits. Most components have been marked with reference designators for easy identification. The board is marked with its board identifying number and with the code 6BA00.

For more information about the IS200AEAAH1A or about the Mark VI series, please refer to datasheets, user guides, or manuals originally published by the OEM.

AX Control maintains an ever-changing inventory of quality surplus industrial automation parts from GE, Reliance Electric, Fuji, Eurotherm, and other companies. If you don’t see what you need on our site, please contact us directly for a quote.

","meta_title":"The GE Mark VI IS200AEAAH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200AEAAH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200AEAAH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200AEAAH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 13:31:03","updated_at":"2020-03-09 09:32:09","prod_pdf":[]},{"id":53540,"part_number":"IS200AEAAH1C","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200AEAAH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200AEAAH1C is a GE Speedtronic circuit board that was created as part of the Mark VI system for control of gas and steam turbines. The Mark VI is an integrated control system designed with triple modular redundant control. It was one of the final Speedtronic systems designed and marketed by General Electric.

The IS200AEAAH1C is a rectangular board with multiple components mounted to its surface. This includes three terminal strips that have been numbered one through thirty-six, with twelve inputs per strip. The board also has a right-angled connector along one edge, several jack connectors, and sixteen stab-on connectors.

Other board components include over forty integrated circuits, hundreds of resistors and capacitors, and surface wiring connections. The board is drilled in each corner and along each long edge. It also has eight relays and two heat sinks.

For more information about proper handling, care, and installation of the IS200AEAAH1C, please refer to documentation like GE manuals, datasheets, and product guides. If this information has been lost or misplaced please let your representative know when placing your order.

AX Control maintains a large on-hand inventory of GE parts that can ship within hours of your order placement. Most orders placed by 3 pm will be shipped the same day. We offer a variety of shipping options to meet your desired cost and speed needs and can ship to anywhere in the world that is not currently under US embargo. We also offer repair services and bulk purchases for surplus inventory.

","meta_title":"The GE Mark VI IS200AEAAH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200AEAAH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200AEAAH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200AEAAH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 13:33:53","updated_at":"2020-03-09 08:52:06","prod_pdf":[]},{"id":53541,"part_number":"IS200AEAAH1CPR","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200AEAAH1CPR is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200AEAAH1CPR is a board component from the GE Speedtronic Mark VI series. The MKVI is a gas/steam heavy-duty turbine management system and is part of the popular Speedtronic line that began development in the late 1960s. The MKVI includes proprietary software such as CIMPLICITY graphics and GE’s Control System Toolbox (a maintenance program) installed on a Windows-based operating system.

The IS200AEAAH1CPR is a rectangular board that has been drilled in each corner and along each long edge. The board has three terminal strips placed parallel to each other along the short dimension of the board. Each of these strips has twelve connections. There is a female connector along one edge (right-angled) along with a two-position female connector on the top edge. Additionally, the board has a three-pin vertical male connector and sixteen stab-on connectors which are organized in two groups of four and a line of eight.

Other board components include eight relays (K1 through K8) and two heat sinks, along with wire wound resistors and other resistors. Additionally, the board houses capacitors, diodes, and over forty integrated circuits. Installation procedures can be found in manuals or datasheets originally provided by the OEM. If these are no longer available, AX Control may be able to provide duplicates with your order.

All static-sensitive boards are shipped in anti-static bags to protect from damage during shipment. All shipping options are listed on our shipping page. We are also happy to work with your private courier service. Local customers can arrange to pick up parts at our North Carolina facility during open hours.

","meta_title":"The GE Mark VI IS200AEAAH1CPR is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200AEAAH1CPR is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200AEAAH1CPR is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200AEAAH1CPR is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 13:35:07","updated_at":"2020-03-09 09:08:54","prod_pdf":[]},{"id":17629,"part_number":"IS200AEAAH1CPR1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI BOARD","short_desc":"IS200AEAAH1CPR1 GE Mark Vi/Mark 6 Gas Turbine Control Card (CIMPLICITY)","content":"

The IS200AEAAH1CPR1 is a GE PCB designed as a component for the Mark VI series. The Mark VI is part of the Speedtronic series for gas/steam heavy-duty turbine management. This series has been in use since GE released the first of the Speedtronic systems (Mark I) in the late 1960s. The Mark VI used the most advanced technology available at the time of its release and includes a Windows-based PC operator interface. The Mark VI is also designed around GE proprietary software like CIMPLICITY graphics and the GE Control System Toolbox, which is used for maintenance.

The IS200AEAAH1CPR1 has three terminal strips. These are placed parallel to each other on the surface of the board. Each strip has twelve positions. The board has a female jack connector located along its right edge. This is a right-angled connector. There is also a 2-position female connector (J4) located along the top edge. The board has a three-pin vertical male pin connector located along the top edge. This is labeled P18.

The IS200AEAAH1CPR1 has sixteen vertical metal connectors. Eight of these are located along the left edge of the board. These are labeled P1 through P8. P10 through P17 are located in two boxes on the top edge of the board, with the even connectors located in one box and the odd in another.

The IS200AEAAH1CPR1 has eight relays. These are marked K1 through K8. They are located on the board in two blocks of four. Two heat sinks are located next to these components. Directly below the heatsinks there are three large wire wound resistors. The board has an additional 200+ resistors of other types. It also has various capacitors and diodes, as well as over forty integrated circuits.

We suggest following installation guidelines as written in manuals or data sheets supplied by the original manufacturer.

","meta_title":"GE MARK VI BOARD","meta_description":"GE MARK VI BOARD","keywords":null,"series_page_description":"GE MARK VI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:18:12","prod_pdf":[]},{"id":53388,"part_number":"IS200AEADH1ABA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200AEADH1ABA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200AEADH1ABA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200AEADH1ABA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200AEADH1ABA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200AEADH1ABA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":16914,"part_number":"IS200AEBIH1ADC","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MARK VI BOARD","short_desc":"Mark VI (Mark 6) IS200AEBIH1ADC GE Control Card w/CIMPLICITY","content":"

The IS200AEBIH1ADC is a PCB component manufactured by GE for the Mark VI system. The MKVI is one of the later Speedtronic systems released by GE for the management of heavy-duty gas/steam turbines. GE has invested several decades of research and development into the Speedtronic line, releasing the first of these systems (the Mark I) in the late 1960s. The Mark VI is built around a Windows-based PC Operator Interface loaded with proprietary software like GE’s CIMPLICITY graphics and their Control System Toolbox.

The IS200AEBIH1ADC is drilled in all four corners with two additional factory-made drill holes along each long edge. This is a rectangular board. One short edge is populated with a P1 connector. This is a right-angle connector. The P2 connector is positioned next to this connector and is a male vertical pin connector. The board has an additional nine connectors. These include male vertical pin connectors like the P3 (8-pin,) P5 (6-pin,) P6 (8-pin,) P8 (5-pin,) P9 (10-pin,) and P11 (6-pin,) as well as three-position female pin connectors like the P4, P7, and P10 connectors.

The IS200AEBIH1ADC has three relays. It includes over 125 integrated circuits, including four oscillating chips. The board has two vertical metal connectors that are marked DCLINK (E1) and DCLINK (E2.) The board uses both the top and the bottom surface for components. The bottom surface is primarily used for capacitors, diodes, and resistors, but also includes some integrated circuits.

Please follow all installation procedures as recommended by the manufacturer in manuals and data sheets. Technical support for the IS200AEBIH1ADC was provided by GE.

","meta_title":"GENERAL ELECTRIC MARK VI BOARD","meta_description":"GENERAL ELECTRIC MARK VI BOARD","keywords":"GENERAL ELECTRIC MARK VI BOARD","series_page_description":"GENERAL ELECTRIC MARK VI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:21:18","prod_pdf":[]},{"id":14838,"part_number":"IS200AEPAH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PRINTED CIRCUIT BOARD MARK VI","short_desc":"The IS200AEPAH1 is a GE printed circuit board","content":"

The IS200AEPAH1 is a component from GE for the Mark VI series. The Mark VI is part of the Speedtronic series for gas and steam turbine management that has been developed and released in various forms by General Electric since the initial release of the Mark I in the late 1960s. These systems are known for their reliability, primarily due to their intentional built-in redundancies on all critical controls and protection parameters. The MKVI is one of the most recent of these systems and is built with a PC-based operator interface with Ethernet capabilities.

The IS200AEPAH1 is designed to accept an optional auxiliary board. This board attaches to the main board using two vertical board connectors located in the upper left corner. It is held off the board by four standoffs connected by screws. When this board is installed the main board has access to two female phone line plugs, as well as multiple integrated circuits, a coil inductor, and a single three-pin female connector. The auxiliary board also has two LEDs located along one edge.

The IS200AEPAH1 is built with six metal oxide varistors. It has twelve relays and three coil inductors. The board has a variety of female connectors. These vary from 2-pin to 20-pin connectors. There are a total of seventeen of these connectors. The board also has a number of integrated circuits, capacitors, transistors, and resistors. The board also has a single small metal housing (c shaped) with a screw mounted through one edge. This component is marked HW1. The board also has several factory made holes. Some of these have metal rings inserted.

The IS200AEPAH1 is a static-sensitive board and will be shipped using an antistatic covering. Please use caution when unboxing the part. Use of a grounding strap is recommended. Manuals or data sheets from the original manufacturer will provide installation guidelines.

","meta_title":"GENERAL ELECTRIC PRINTED CIRCUIT BOARD MARK VI","meta_description":"GENERAL ELECTRIC PRINTED CIRCUIT BOARD MARK VI","keywords":"GENERAL ELECTRIC PRINTED CIRCUIT BOARD MARK VI","series_page_description":"GENERAL ELECTRIC PRINTED CIRCUIT BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 13:43:52","prod_pdf":[]},{"id":14839,"part_number":"IS200AEPAH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CIRCUIT BOARD GE MARK VI","short_desc":"Mark 6 (Mark VI) IS200AEPAH1A GE printed circuit board","content":"

The IS200AEPAH1A is a PCB component manufactured by GE for the Mark VI series. This series is part of the Speedtronic line for steam/gas turbine control created by General Electric in the 1960s and released in various forms since then. Speedtronic systems are known for their reliability and adaptability. The MKVI has been designed to offer complete control, protection, and monitoring to turbine systems. It can be used in a variety of applications.

The IS200AEPAH1A is built with an optional auxiliary board. The optional board attaches to the IS200AEPAH1A by screws inserted into standoffs. It communicates with the main board via connections to two male pin connectors in the upper left corner. This board is populated with multiple integrated circuits, two female phone plugs, a three-pin female connector, and two light emitting diodes. These LEDs are located along the left edge of the board.

The IS200AEPAH1A has twelve relays. It is built with six metal oxide varistors. These are placed in a single line. Varistors are variable resistors with resistance dependant on the applied voltage. The board has seventeen female-pin vertical connectors located along the edges of the board. These connectors vary from two pins up to twenty pins. The board has several large factory-made holes in its surface. Some of these holes are plated. The board includes integrated circuits, resistors, transistors, and capacitors. A single c-shaped metal housing is placed on the board. This is marked HW1.

Refer to manuals or data sheets for installation guidelines. Our team will use antistatic material to protect the IS200AEPAH1A during shipment. We recommend the use of a grounding strap during unboxing and installation.

","meta_title":"CIRCUIT BOARD GE MARK VI","meta_description":"CIRCUIT BOARD GE MARK VI","keywords":null,"series_page_description":"CIRCUIT BOARD GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"IS200AEPAH1AFD IS200AEPAH1AAA","created_at":null,"updated_at":"2020-02-21 16:06:04","prod_pdf":[]},{"id":53389,"part_number":"IS200AEPAH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200AEPAH1AAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200AEPAH1AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200AEPAH1AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200AEPAH1AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200AEPAH1AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":16680,"part_number":"IS200AEPCH1ABC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BOARD ASSEMBLY","short_desc":"","content":null,"meta_title":"GENERAL ELECTRIC BOARD ASSEMBLY","meta_description":"GENERAL ELECTRIC BOARD ASSEMBLY","keywords":null,"series_page_description":"GENERAL ELECTRIC BOARD ASSEMBLY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 11:53:16","prod_pdf":[]},{"id":53390,"part_number":"IS200AEPCH1CCB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":4,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200AEPCH1CCB Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200AEPCH1CCB Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200AEPCH1CCB Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200AEPCH1CCB Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200AEPCH1CCB Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":53466,"part_number":"IS200ATBAG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200ATBAG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","short_desc":"GE Innovation Series Application I/O Terminal Board (ATBA)","content":"

The IS200ATBAG1A is an Application I/O Terminal Board (ATBA) created by GE for the Innovation Series.

The IS200ATBAG1A is a replacement PCB that connects to the Control Assembly Backplane PCB (CABP). It has the ability to provide terminal connections to the J6 and J7 connection signals that are on the backplane. This part serves as an interface for drive connections. It is normally DIN-rail installed inside of the control cabinet for the system.

On the IS200ATBAG1A there is a terminal block with two terminal strips with a total of 60 terminals. There is also an orange 24-pin jack and an orange 36-pin jack on the ATBA. There are two factory drilled holes on the top and bottom right corners. The part number for the board is located on the bottom board edge. This board does not have any type of hardware that can be adjusted, nor does it have fuses.

There are specific terminal assignments for the two terminal strips on the IS200ATBAG1A. The J6 connection used terminals 1-36 while the J7 connection uses 37-60. Terminals 1, 3, and 5 are for a MA Pilot. 2, 4, and 6 are a System Fault String. Terminals 7 and 9 are for the Fdbk. Terminals 8, 10, and 12 are a Local Fault String. 11 and 13 are for the SSR. Terminals 14-36, 37, and 39 are digital outputs. Terminals 38, 40, 42, 44, 46, 52, 54, 56, 58, and 60 are analog outputs. Terminals 41, 43, 45, 47, 49, 51, 53, 55, 57, and 59 are for the tachometer. Terminals 48 and 50 are for the potentiometer.

","meta_title":"The GE Mark VI IS200ATBAG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","meta_description":"The GE Mark VI IS200ATBAG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","keywords":"["The GE Mark VI IS200ATBAG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s Speedtronic series."]","series_page_description":"The GE Mark VI IS200ATBAG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-20 08:23:00","updated_at":"2019-12-30 08:26:12","prod_pdf":[]},{"id":15094,"part_number":"IS200ATBAG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC INTERFACE CARD","short_desc":"MK VI/MK 6 IS200ATBAG1AAA GE PCB Application I/O Board","content":"

The IS200ATBAG1AAA is an Application I/O Terminal Board designed for the Mark VI series. The Mark VI series is part of the Speedtronic family of gas/steam turbine management that has been developed by GE since the 1960s. The Mark VI is the fifth system in the Speedtronic line, with advanced computerized controls and triple-redundant backups on all protection parameters and critical controls.

The IS200ATBAG1AAA provides terminal block connections for the signals found on backplane connectors J6/J7 of the Control Assembly Backplane Board (CABP.) This board is used on Innovation Series drives. These boards are DIN-rail mounted inside the control cabinet, with fuses externally supplied.

The IS200ATBAG1AAA has one terminal block with sixty positions to connect to the J6/J7 connectors on the CABP board. This terminal block has two lines of thirty connectors. The connectors are labeled in blocks, as follows: system fault string, local fault string, digital input, analog inputs, pot, analog outputs, MA pilot, MA fdbk, SSR, relay contacts, isolate power, and tachometer. These are bordered on one edge by a cable shield and on the other by the IS200ATBAG1AAA two connectors, which are labeled J6 and J7. J6 is a 36-pin vertical male pin connector (4 x 9.) J7 is a 25-pin vertical male pin connector.

The IS200ATBAG1AAA installs with nine metal screws and washers into standoffs. When the board is installed it is important to fully tighten the screws to secure the board in place. Full installation instructions can be found in GE publication GEI-100284.

","meta_title":"GENERAL ELECTRIC INTERFACE CARD","meta_description":"GENERAL ELECTRIC INTERFACE CARD","keywords":null,"series_page_description":"GENERAL ELECTRIC INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:28:33","prod_pdf":[]},{"id":16911,"part_number":"IS200ATBAG1BAA1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MARK VI INTERFACE CARD","short_desc":"Mk6/Mk VI IS200ATBAG1BAA GE Circuit Board (CIMPLICITY)","content":"

The IS200ATBAG1BAA1 is a component manufactured for General Electric’s Mark VI series. The MKVI is one of the most advanced of GE’s gas/steam turbine Speedtronic management systems that includes a Windows 2000/XP based operator interface, Ethernet and DCS communications, and Cimplicity software. This server-based HMI/SCADA software collects and shares real-time and historical data that provides visibility to control and monitor plant equipment, processes, and resources.

The largest component on the IS200ATBAG1BAA1 is a sixty-pin terminal block located in the center of the board. This block is used to connect to backplane connectors J6 and J7 located on the CABP board (Control Assembly Backplane.) The two lines of thirty connectors are labeled in blacks ranging from one connector up to thirteen connectors. These include: system fault string (3,) local fault string (3,) digital inputs (12,) analog inputs (5,) Tachometer (10,) MA Pilot (3,) Fdbk (2,) SSR (2,) digital outputs (13,) pot (2,) and analog outputs (5.)

The IS200ATBAG1BAA1 is built with two male vertical pin connectors. These are marked J6 and J7. One is a 36-pin connector (J6,) and the other is a 25-pin connector (J7.) The opposite side of the board includes a cable shield to protect and contain cables.

The IS200ATBAG1BAA1 should be handled at all times as a static-sensitive board. Technicians should use a grounding strap when installing or maintaining this component. Our warehouse will use anti-static coverings to protect the board from static discharge during shipment. GE publication GEI-100284 will provide more information on installation and maintenance of the IS200ATBAG1BAA1.

","meta_title":"GENERAL ELECTRIC MARK VI INTERFACE CARD","meta_description":"GENERAL ELECTRIC MARK VI INTERFACE CARD","keywords":null,"series_page_description":"GENERAL ELECTRIC MARK VI INTERFACE CARD","quote_description":null,"inventory_notes":"SCREWS & COMPONENTS IN SEPARATED STATIC BAG","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:29:42","prod_pdf":[]},{"id":14473,"part_number":"IS200AVGAG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER CARD","short_desc":"The IS200AVGAG1 is a GE Mark VI printed circuit board","content":"

The IS200AVGAG1 is a component created by GE for the Mark VI series. The Mark VI was one of the final systems released by General Electric as part of the Speedtronic line for gas and steam turbine management. The Mark VI includes Ethernet capabilities, a PC-based Operator Interface that runs on a Windows platform, and pre-loaded software like GE CIMPLICITY graphics and the GE Control System Toolbox. Both of these have been designed to coordinate with the Mark VI hardware specifically for the management of heavy-duty turbine systems.

The IS200AVGAG1 is a Gate Driver Amplifier Card. This card is a long narrow board with very few components; the components that are on the board are primarily located on the right one fourth of the board. The board has two rectangular openings that are placed along the center line of the board; one of these is placed near the left edge of the board. The other is placed close to the center of the board. Each opening is bridged by a U-shaped metal housing that is screwed to the board on each side of the opening. The metal housing has a round opening cut into its center. These housings are marked as UC and LC. The board has four inductor terminals cut into the board. These are marked UG, UE, LG, and LE.

The IS200AVGAG1 has three header connectors located along the right edge. These are labeled 1PL, 2PL, and SHPL. Ten transistors are used on this board. They are not all of the same design. The board uses ceramic capacitors and metal film resistors. The board carries the codes 6BA02, AVGAG#A, and 6DA02.

A shipping quote will be provided upon request. AX Control offers our customers a number of shipping options varying from economical ground service to fast overnight early a.m delivery.

","meta_title":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER CARD","meta_description":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER CARD","keywords":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER CARD","series_page_description":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-28 15:58:44","prod_pdf":[]},{"id":14474,"part_number":"IS200AVGAG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE DRIVER AMP BOARD MARK VI GE","short_desc":"MK VI IS200AVGAG1AAA GE Speedtronic Circuit Board","content":"

The IS200AVGAG1AAA is a PCB component that was created by GE for the Mark VI system. The MKVI is part of the Speedtronic line of gas/steam turbine management that was developed by General Electric. This series began with the MKI in the 1960s and continued through the 2000s with the MKVI and the MKVIe. The MKVI includes a central Control Module with software limit checking diagnostics in each circuit card, plus high/low limit checking diagnostics built into the hardware. The control module also has an alarm management system that collects and time stamps all diagnostic alarm messages and displays them on the Operator Interface (Windows PC.)

The IS200AVGAG1AAA functions as a Gate Driver Amplifier Board. The board is a rectangular board with multiple drill holes located on the board. This includes drill holes in each corner, plus four induction terminals placed toward the center. The induction terminals are labeled UG, LG, UE, and LE. The board also has two rectangular cut-outs that are bridged by u-shaped metal housings. Each housing screws to the board at two points and has a round cut-out located in its center.

The IS200AVGAG1AAA is populated by three header connectors. These are placed on the right edge of the board and are labeled SHPL, 1PL, and 2PL. The board also includes capacitors, resistors, and diodes. The board has ten transistors. The board has the GE logo, the codes PC-4, 94v-0, AVGAG#A, 6BA02, and 6DA02.

AX Control offers shipping options to meet a variety of needs, from economical ground shipping to overnight air. Our team can provide a shipping quote for your preferred shipping option upon request.

","meta_title":"GATE DRIVER AMP BOARD MARK VI GE","meta_description":"GATE DRIVER AMP BOARD MARK VI GE","keywords":"GATE DRIVER AMP BOARD MARK VI GE","series_page_description":"GATE DRIVER AMP BOARD MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:30:41","prod_pdf":[]},{"id":17591,"part_number":"IS200AVGBG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":3,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI BOARD","short_desc":"GE IS200AVGBG1A Speedtronic Mark VI (Mark 6)","content":"

The IS200AVGBG1A is a GE printed circuit board component for the Mark VI series. The MKVI is part of GE’s successful Speedtronic series that has been used for the management of heavy-duty steam and gas turbine systems since the release of the MKI in the late 1960s. The MKVI offers complete control of the turbine system with triple redundant protection modules designed to maximize system reliability. The MKVI has a Windows-based PC operator interface with Ethernet capabilities.

The IS200AVGBG1A is a rectangular board designed with multiple factory made cutouts. The largest of these is a rectangular cutout near the center of the board. This cutout is spanned by a small c-shaped metal housing with a round hole cut into its center, connected to the PCB by two screws. This connects into a round opening labeled “LC” Other similar openings on the board are labeled LG, LE, VG, and VE.

The IS200AVGBG1A has three board connectors. These connectors are located on one board edge. All connectors are male vertical pin connectors. They include a two-, eight- and six-pin connector. The board also has one metal inseparable assembly, labeled UC.

The IS200AVGBG1A is built with ten transistors of three types. It uses metal film resistors and ceramic capacitors of various designs.

Our team will carefully pack the IS200AVGBG1A for its shipment to your facility, including wrapping it in an anti-static sleeve to prevent damage from static charge during transit. We recommend the use of a grounding strap from the time of unboxing through installation. Please follow all manufacturer installation guidelines as found in manuals or data sheets.

The IS200AVGBG1AAA is a printed circuit board (PCB) designed by GE as part of the Mark VI series. It is also sometimes used in the AV300i drive. The MKVI Speedtronic series has been used for the management of heavy-duty gas or steam turbines for decades and offers complete control via triple-redundant protection modules. The system is designed with a Windows-based operating system that includes proprietary software (CIMPLCITY/Control System Toolbox) and Ethernet capabilities.

As a gate driver board in the AV300i drive, typically the drive needs three IS200AVGBG1AAA boards per each 3300,3350, 3400 or 3450 HP drive. The board is not needed for drives above or below those HP ratings.

The IS200AVGBG1AAA is a smaller rectangular-shaped board with factory-made cutouts. The largest of these is rectangular-shaped and located near the center top of the board. It is spanned by a c-shaped clip connected to the board using two screws. The clip has a round mounting hole located near its center. Other drilled openings in the board are labeled LG, LE, VG, and VE.

Other board components include male vertical pin connectors (two-, eight-, and six-pins) as well as transistors, metal film resistors, and ceramic capacitors.

For more information about proper installation and handling of the IS200AVGBG1AAA, please refer to the original datasheets or user guides provided by General Electric. If these are no longer available, it is possible AX Control can provide duplicate copies with your order. Talk to your representative.

","meta_title":"GE Mark VI IS200AVGBG1AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200AVGBG1AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200AVGBG1AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200AVGBG1AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2020-03-09 09:55:09","prod_pdf":[]},{"id":14475,"part_number":"IS200AVIFH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MARK VI BRIDGE INTERFACE","short_desc":"The IS200AVIFH1 is a GE Mark VI printed circuit board","content":"

The IS200AVIFH1 is a PCB component created by GE for the Mark VI system. This system is part of the Speedtronic series that was created and developed by General Electric for the management of steam or gas turbines. This series began with the release of the MKI in the 1960s and continued through the new Millennium with the Mark VIe (the last Speedtronic system.) The Mark VI includes features like Ethernet communications, a central Control Module that can be designed in either Simplex or Triple Redundant form, and an Operator Interface that allows access to system data from a single location.

The IS200AVIFH1 is a rectangular board that is component-dense. This board has five transformers. The board has three heat sinks that are clustered in the upper left corner of the board. It has four stab-on connectors, as well as eleven header connectors of various size and one vertical pin ribbon connector. The board has two jumper switches, several transistors, two fuses, and multiple integrated circuits. It is built with metal film resistors and resistors of other material. Capacitors include high-voltage electrolytic, polyester vinyl, and other material. The board has a single varistor.

Most components on the IS200AVIFH1 are marked with reference designators. The board is marked with the code 6BA02 and 6DA02. The board has multiple drilled holes and slots.

Installation procedures for the IS200AVIFH1 may be found in manuals, datasheets, or user guides that reference that part number. Technical support for Mark VI parts was provided to end users by General Electric.

","meta_title":"GENERAL ELECTRIC MARK VI BRIDGE INTERFACE","meta_description":"GENERAL ELECTRIC MARK VI BRIDGE INTERFACE","keywords":"GENERAL ELECTRIC MARK VI BRIDGE INTERFACE","series_page_description":"GENERAL ELECTRIC MARK VI BRIDGE INTERFACE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-28 08:51:00","prod_pdf":[]},{"id":14476,"part_number":"IS200AVIFH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BRIDGE INTERFACE BOARD GE MARK VI","short_desc":"The IS200AVIFH1 is a GE Mark VI printed circuit board","content":"

The IS200AVIFH1A is a PCB component made to be a part of the Mark VI system. The MKVI is part of the GE Speedtronic gas/steam turbine management series that began in the 1960s with the release of the MKI and has continued through the 2000s with later systems like the MKVI and MKVIe. The MKVI is usually powered from a 125 VDC battery system or uses a 120/240vac source with an isolation transformer that rectifies power to 125 VDC. This power is fed to internal power supplies for the Control Modules, for its expansion modules, and for termination boards to power field contact inputs and field solenoids.

The IS200AVIFH1A is a component-dense board that includes five transformers; three of these transformers are marked 156DC005 770097-9 70-0087 4100. The board has three heat sinks. These are placed in the upper left corner of the board. The board has multiple connectors, including four stab-on connectors, one vertical pin ribbon connector, and eleven header connectors that vary from two pins to eight pins. The board has several transistors, two jumpers, two fuses, and several integrated circuits.

The IS200AVIFH1A is built with various resistors, including metal film resistors. The board has polyester vinyl capacitors, high-voltage electrolytic capacitors, and other capacitors. There is one varistor. The board is marked with the board number, the GE logo, and the codes 6DA02 and 6BA02.

AX Control offers a variety of shipping options through large world-wide carriers. We are also happy to work with your courier service. Blind shipping is available.

","meta_title":"BRIDGE INTERFACE BOARD GE MARK VI","meta_description":"BRIDGE INTERFACE BOARD GE MARK VI","keywords":"BRIDGE INTERFACE BOARD GE MARK VI","series_page_description":"BRIDGE INTERFACE BOARD GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-28 09:21:19","prod_pdf":[]},{"id":14477,"part_number":"IS200AVSCG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SOURCE SCR CONTROL BOARD","short_desc":"The IS200AVSCG1 is a GE Mark VI printed circuit board","content":"

The IS200AVSCG1 is a component created by General Electric for the Mark VI system. This system is one of last to be developed under the “Speedtronic” name for gas/steam turbine management. This series began in the 1960s with the Mark I and continued into the 2000s with the Mark VI and Mark VIe. The Mark VI meets ISO-9000-3 Quality Management and Quality Assurance Standards (part 3.) It also meets UL 508A and CSA 22.2 No. 14 Safety standards. The Mark VI is designed for operation in air-conditioned rooms with convection cooling. If operated under other conditions, special cabinets can be provided.

The IS200AVSCG1 is a rectangular-shaped board that is drilled twice in each corner. The board has a single transformer (156DC005.) The board has seven transistors and two LEDs. The LEDs are marked IMPOK and SCOK. The board has five header connectors and five stab-on connectors. The stab-on connectors are labeled as the connecter (E1 through E5,) but are also labeled L1, L2, L3.

The IS200AVSCG1 is built with metal film and carbon composite resistors. It has a single high-voltage electrolytic capacitor and many ceramic capacitors. The codes 6BA02, 6DA02, AVSC6#A, and the manufacturer’s logo are printed on the board surface. The board has sixteen integrated circuits, including several dual d-type positive-edge-triggered flip-flops with clear and preset, as well as oscillating chips.

Information relating to the installation of the IS200AVSCG1 board may be found in manuals, user guides, and data sheets that reference the part number. Our team will use an antistatic sleeve as part of packaging to protect the board during transit.

","meta_title":"GE SOURCE SCR CONTROL BOARD","meta_description":"GE SOURCE SCR CONTROL BOARD","keywords":"GE SOURCE SCR CONTROL BOARD","series_page_description":"GE SOURCE SCR CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-28 10:12:05","prod_pdf":[]},{"id":14478,"part_number":"IS200AVSCG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE AVSC SCR Control Board. PCB comes with a 3 year warranty and will be fully tested prior to sale.","short_desc":"The IS200AVSCG1A is a GE Mark VI printed circuit board","content":"

The IS200AVSCG1A is a PCB component made by GE for the Mark VI system. The MKVI was one of the last of the Speedtronic series to be developed and released by GE for the management of heavy-duty gas or steam turbines. The Speedtronic line began in the 1960s and continued through the release and development of the Mark VIe in the 2000s. The Mark VI system meets CSA 22.2 Number 14 and UL508A safety standards. It also meets ISO 9000-3 Quality Assurance/Quality Management Standards (part 3.) This system is designed for operation within rooms with convection air-conditioned cooling.

The IS200AVSCG1A is factory drilled in all four corners. This includes one large and one small hole per corner. The board also has several small slots cut into its surface. The board is populated with a transformer and seven transistors. The board has two LEDs located on the right side of the board. The LEDs are marked as SCOK and IMPOK. The board has various connectors, including stab-on connectors (5,) and vertical pin header connectors (5,) that include four 2-pin connectors and one larger connector.

The IS200AVSCG1A has one high-voltage electrolytic capacitor. The board has many ceramic capacitors. It has metal film resistors and CCRs of various resistance and size. Integrated circuits include oscillating chips and dual d-type positive edge triggered flip-flops. The board is marked with codes like 6DA02, 6BA02, and AVSC6#2.

Most in-stock parts in the AX Control warehouse will ship on the same day they are ordered. Large motors and drives may need extra time; please order by 2 pm if same day shipment is desired.

","meta_title":"GE AVSC SCR Control Board. PCB comes with a 3 year warranty and will be fully tested prior to sale.","meta_description":"GE AVSC SCR Control Board. PCB comes with a 3 year warranty and will be fully tested prior to sale.","keywords":"GE AVSC SCR Control Board. PCB comes with a 3 year warranty and will be fully tested prior to sale.","series_page_description":"GE AVSC SCR Control Board. PCB comes with a 3 year warranty and will be fully tested prior to sale.","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-28 10:45:38","prod_pdf":[]},{"id":14479,"part_number":"IS200BAIAH1","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"I/O BOARD PWM2/3 GE MARK VI","short_desc":"The IS200BAIAH1 is a GE printed circuit board","content":"

The IS200BAIAH1 is a printed circuit board component for the Mark VI series from GE. The Mark VI is the fifth system in the Speedtronic gas/steam turbine management series developed by General Electric. This system includes a computer-based operator interface (Windows 2000/XP,) Ethernet communications, and the MK VI Control System Toolbox for making changes within the system. The MKVI is built with triple-redundant backups on all critical controls and protection parameters.

The IS200BAIAH1 functions as a bridge application interface board, which provides an earth ground reference and isolation for all signal inputs from user terminal boards. The board converts digital inputs from the DSPX board to analog outputs and also provides an RS-232C Input/Output interface between the DSPX and the drive’s PC connections and keypad.

The IS200BAIAH1 is built with one green light emitting diode built into its front panel. This is labeled “IMOK.” This LED will go out automatically if no read or write activity is detected. The board has no fuses but does include four analog input jumpers and three TP test points. The IS200BAIAH1 connects to the control rack backplane through two connectors labeled P1 and P2. The board also has three relays and six varistors.

It is important to note the IS200BAIAH1 is part of the Innovation series of boards. These boards are designed for specific rack slots and may be damaged if inserted into the wrong slot. Please follow installation instructions. Manuals and data sheets retained from the manufacturer will have this information. If these publications have not been retained, some of this information can be found in GE publication GEI-100268.

","meta_title":"I/O BOARD PWM2/3 GE MARK VI","meta_description":"I/O BOARD PWM2/3 GE MARK VI","keywords":"I/O BOARD PWM2/3 GE MARK VI","series_page_description":"I/O BOARD PWM2/3 GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 11:48:27","prod_pdf":[]},{"id":14480,"part_number":"IS200BAIAH1B","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PULSE WIDTH MODULATION 2/3 I/O BOARD","short_desc":"GE Mark VI IS200BAIAH1B Speedtronic","content":"

The IS200BAIAH1B is a PCB designed for the Mark VI series from General Electric. The Mark VI is the fifth release of the Speedtronic steam and gas turbine management system developed with triple-redundant backups on protection parameters and critical controls. The MKVI includes a computer-based operator interface (either Windows 2000 or XP) and Ethernet communications.

The IS200BAIAH1B is designed to function as a bridge application interface board. This board provides earth-ground reference and isolation for signal inputs from terminal boards. Each board is designed with an onboard EEPROM containing firmware not intended for removal or field programming.

The IS200BAIAH1B is built with a narrow black front panel. This panel includes a single green LED that is marked “IMOK.” The panel also carries the board number and the warning “Install in Slot 1 only.” The IS200BAIAH1B is an Innovation series board, which is designed to be placed into a specific rack slot. This board can be damaged if it is installed into the improper rack slot.

The IS200BAIAH1B has three relays, six varistors, four jumper switches, three test points, and several integrated circuits. The board has two backplane connectors located on one edge. Jumpers should be in either the VIN position or the 4-20 mA position.

A wrist grounding strap should be worn at all times when handling the IS200BAIAH1B. The board may be damaged by static electricity. Our team will use an anti-static wrap to protect the IS200BAIAH1B during transit. Please follow all installation procedures as written in manuals and data sheets from the manufacturer. If these have not been retained, refer to GE publication GEI-100268 for information.

","meta_title":"PULSE WIDTH MODULATION 2/3 I/O BOARD","meta_description":"PULSE WIDTH MODULATION 2/3 I/O BOARD","keywords":null,"series_page_description":"PULSE WIDTH MODULATION 2/3 I/O BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:34:01","prod_pdf":[]},{"id":53444,"part_number":"IS200BAIAH1BCB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BAIAH1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"The IS200BAIAH1BCB is a Bridge Application Interface Board (BAIA) made by General Electric.","content":"

The IS200BAIAH1BCB is a Bridge Application Interface Board (BAIA) made by General Electric.

The IS200BAIAH1BCB is meant to be a replacement printed circuit board. This board contains preloaded firmware that is stored on a factory-installed EEPROM. This EEPROM shouldn’t be removed or reprogrammed and if it becomes damaged the entire board will need to be replaced. There is an RS-232C I/O interface that leads from the DSPX board to the keypad and PC for the drive.

The IS200BAIAH1BCB typically slides into a control rack and is positioned vertically. This board should always be installed into the correct slot because the slots are typically configured for specific boards. Installing the board into an incorrect slot will damage it. There is a label on the faceplate that instructs the user to only install this board into Slot 1. Also, on the faceplate for this board is an LED indicator light labeled IMOK. There are also two ejector tabs and two mounting screws that will aid the user in installing and removing the board from the rack.

The IS200BAIAH1BCB has many components. It has over 50 integrated circuits, 3 relays, 6 transistors, an inductor, 6 diodes, 5 jumpers, a JTAG connector, and two transformers. There are over a hundred capacitors and resistors on this card. There are a total of two connectors that slide into card slots that are located on the control rack assembly.

For more information about installing the IS200BAIAH1BCB, please read datasheet: GEI-100268A that was initially produced by General Electric.

","meta_title":"The GE Mark VI IS200BAIAH1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BAIAH1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BAIAH1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BAIAH1BCB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-10 12:28:30","updated_at":"2019-12-16 13:31:27","prod_pdf":[]},{"id":53439,"part_number":"IS200BAIAH1BDC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BAIAH1BDC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","short_desc":"The IS200BAIAH1BDC is a printed circuit board created by GE. This board is part of GE\'s Innovation Series.","content":"

The IS200BAIAH1BDC is a GE Bridge Application Interface Board.

The IS200BAIAH1BDC is a replacement PCB. This board can take signals that are coming from terminal boards, isolate them, and give them earth/ground reference. It can also turn digital input into analog outputs on the DSPX PCB. It also has an RS-232C I/O interface that goes from the DSPX board and the keypad and PC connections for the drive.

The IS200BAIAH1BDC slides vertically into a control rack. It is very important to slide this card into the correct slot on the rack. Failure to do so will result in damage to the board. On the faceplate of the board, it states to slide this board into slot 1 only. There is an LED indicator directly below the top ejector tab. There are a total of two ejector tabs and two mounting screws on the faceplate. It is recommended that when installing this board to tighten the screws evenly to ensure that the board is in the card slots squarely.

The IS200BAIAH1BDC is made up of many different components. It has an onboard EEPROM with factory-installed firmware. It also has 3 relays, over 50 integrated circuits, 6 transistors, 6 diodes, an inductor, two transformers, 5 jumpers, and a JTAG connector. There are also over a hundred resistors and capacitors on this board. There are two connection ports that slide into the card slots on the control rack.

For more information about the installation and makeup of the IS200BAIAH1BDC, please refer to the GE datasheet GEI-100268A.

","meta_title":"The GE Mark VI IS200BAIAH1BDC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","meta_description":"The GE Mark VI IS200BAIAH1BDC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","keywords":"["The GE Mark VI IS200BAIAH1BDC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s Speedtronic series."]","series_page_description":"The GE Mark VI IS200BAIAH1BDC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-10 12:20:20","updated_at":"2019-12-16 09:49:22","prod_pdf":[]},{"id":53392,"part_number":"IS200BAIAH1BEE","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200BAIAH1BEE Speedtronic Turbine Control PCB board.","short_desc":"GE Bridge Application Interface Board (BAIA) for Innovation Series","content":"

The IS200BAIAH1BEE is a Bridge Application Interface Card that was created by GE for its Innovation Series.

The IS200BAIAH1BEE or BAIA is intended to be a replacement PCB. It has an EEPROM that comes with factory-preloaded firmware. This memory circuit should never be reprogrammed or removed. If it stops working or becomes damaged, the complete board will need to be removed and replaced. The BAIA also uses an RS-232C I/O interface which goes to the drive system keypad or PC from a DSPX board.

The IS200BAIAH1BEE should be placed vertically into the control card rack assembly it is assigned to. On the faceplate of the BAIA, there is a warning label that alerts the user to only mount this card into Slot 1 on the rack. The slots on the rack are specifically configured for certain boards. Installing this board into a slot other than the first one will result in damage to the board. There is an LED indicator on the faceplate that is labeled IMOK.

The IS200BAIAH1BEE has many different components. It has 3 relays, a JTAG connector, 5 jumpers, two transformers, an inductor, 6 transistors, 6 diodes, and over 50 integrated circuits. There are also well over a hundred resistors and capacitors on the BAIA. There are two connectors on the back of the board that slides into card slots that are on the backplane of a card rack assembly.

If you are interested in more information about the IS200BAIAH1BEE and how to install it, please look over the datasheet: GEI-100268A from General Electric.

","meta_title":"GE Mark VI IS200BAIAH1BEE Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200BAIAH1BEE Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200BAIAH1BEE Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200BAIAH1BEE Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-12-17 09:21:01","prod_pdf":[]},{"id":14481,"part_number":"IS200BICHH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BRIDGE INTERFACE HIG BOARD","short_desc":"The IS200BICHH1 is a Mark VI printed circuit board","content":"

The IS200BICHH1 is a Bridge Interface and Control board manufactured by GE for their Mark VI system. The MKVI is one of the later Speedtronic gas and steam heavy-duty turbine management systems. The Speedtronic series has been managing turbine systems since the late 1960s, with each new system improving on the last with more technologically advanced components.

The IS200BICHH1 is designed to mount into an Innovation Series board rack. The board has a narrow black front panel with a display located along the top third and a plug connector (labeled JM) inserted into the bottom third. This board installs into slot five only. The IS200BICHH1 takes multiplexed phase faults from the FOSB board and demultiplexes them. The board interfaces with twenty-four gate drivers for the neutral-point clamped (NPC) H-bridge. Cooling temperature for the board is monitored by a subassembly. Each subassembly monitors cooling temperature at two locations with thermistors.

The IS200BICHH1 is populated with twenty-nine TP test points, eighteen LEDs, two backplane connectors, and two fuses. The LEDs are for signal observation. The board also has over forty integrated circuits, many capacitors, and resistors. Resistors are usually made of metal film.

The IS200BICHH1 should always be treated as though it were static sensitive. Technicians should wear a wrist grounding strap while handling this component. Make sure the board has been removed from energized equipment before beginning any kind of maintenance. Our warehouse team will use an anti-static sleeve to protect the part during shipment. Please follow all safety procedures as stated in manufacturer manuals and data sheets.

","meta_title":"GE BRIDGE INTERFACE HIG BOARD","meta_description":"GE BRIDGE INTERFACE HIG BOARD","keywords":"GE BRIDGE INTERFACE HIG BOARD","series_page_description":"GE BRIDGE INTERFACE HIG BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-21 14:00:44","prod_pdf":[]},{"id":14482,"part_number":"IS200BICHH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BRIDGE INTERFACE HIG GENERAL ELECTRIC CARD","short_desc":"GE IS200BICHH1A Mark VI (Mark 6) Bridge Interface printed circuit board","content":"

The IS200BICHH1A is a component manufactured by GE for the Mark VI system as a Bridge Interface and Control printed circuit board. The Mark VI system is part of the successful Speedtronic series that GE developed starting in the 1960s with the Mark I.

The IS200BICHH1A mounts into an Innovation series board rack. The Innovation series is configured with T M-10 and T M-DC hardware and applications. These racks have LAN options and Boolean logic instructions that provide permissive diagnostic functions with no additional configuration. The IS200BICHH1A is built with a narrow front panel that has a plug connector (marked JM) located in its bottom third and a display in its top third. The display allows for review of LEDs for signal observation. Eighteen LEDs are located on the board.

The IS200BICHH1A has two backplane connectors. These are marked P1 and P2. It has twenty-nine TP test points, over forty integrated circuits, and two fuses. The fuses are replaceable 250 V, 200 mA fuses.

The IS200BICHH1A takes multiplexed phase faults from FOSB boards and demultiplexes the faults. The IS200BICHH1A classifies faults into two classes. These are bridge faults and BICH board faults.

The IS200BICHH1A should be treated as a static sensitive board at all times. The board should be removed from energized equipment before any type of maintenance begins. An anti-static sleeve will be used by our warehouse team to protect the part during shipment. Please review and follow all manufacturer safety procedures as they appear in publications like manuals or data sheets.

","meta_title":"BRIDGE INTERFACE HIG GENERAL ELECTRIC CARD","meta_description":"BRIDGE INTERFACE HIG GENERAL ELECTRIC CARD","keywords":"BRIDGE INTERFACE HIG GENERAL ELECTRIC CARD","series_page_description":"BRIDGE INTERFACE HIG GENERAL ELECTRIC CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-01-29 16:35:34","prod_pdf":[]},{"id":53533,"part_number":"IS200BICIH1A","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BICIH1A unit was manufactured and designed by General Electric and made to be a part of the GE Mark VI series. The IS200BICIH1A unit is classified as an interface card meant for use with the GE Mark VI series of SPEEDTRONIC Mark VI Turbine Control Systems, which is a system designed to completely integrate control, protection, and monitoring for generator and mechanical drive applications that operate gas and steam turbines.

The IS200BICIH1A interface card controls the interfaces for the General Electric SPEEDTRONIC Mark VI Turbine Control System. There is an I/O Interface and an Operator Interface. The aforementioned I/O interface is comprised of two versions of the unit’s termination boards. One of these termination boards has two 24 point, barrier type terminal blocks which can be unplugged whenever a field maintenance event must occur. They are ready for Simplex and also TMR controls and have the ability to accept two 3.0 millimeter squared wires with 300-volt insulation. The Operator Interface, most commonly known as the Human Machine Interface (or HMI) is simply a PC which runs a Microsoft Windows NT operating system, which has supporting client-server capability, a control system toolbox for maintenance, a CIMPLICITY graphics display system, a software computing interface for the Mark VI, and even more various control systems included with the network that can be used at any point.

Call or email an AX Control sales representative today to inquire about the availability of the IS200BICIH1A interface card! We have the IS200BICIH1A unit in refurbished condition or possibly in new, never touched condition available in stock today for a fast and simple purchase.

","meta_title":"The GE Mark VI IS200BICIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 12:12:35","updated_at":"2020-03-06 08:51:56","prod_pdf":[]},{"id":53534,"part_number":"IS200BICIH1ADB","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICIH1ADB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BICIH1ADB unit is an interface card that was designed and manufactured by the company General Electric. The IS200BICIH1ADB interface card was created to be included as part of the GE Mark VI Series. The IS200BICIH1ADB interface card is meant to be used inside the GE Mark VI series of SPEEDTRONIC Mark VI Turbine Control Systems. The GE Mark VI series of SPEEDTRONIC Mark VI Turbine Control Systems was designed as full integration of monitoring, protection, and control systems for both mechanical and generator drive applications which are used in the operation process of both steam and gas turbine systems.

The IS200BICIH1ADB interface card maintains the two interfaces used with the General Electric SPEEDTRONIC Mark VI Turbine Control System. There are two interfaces used in the General Electric SPEEDTRONIC Mark VI Turbine Control System, and those are the I/O Interface and the Operator Interface. This Operator Interface is a standard personal computer with Microsoft Windows NT operating system, and that has the capability of supporting client and server capabilities, a control systems toolbox for whenever a maintenance problem arises, a Mark VI computing interface, and various other control systems which are used within the network at whatever point as determined by the user. The I/O Interface has two separate versions of the termination boards, which are able to be unplugged at any time should the need to perform field maintenance occur.

Interested in the IS200BICIH1ADB interface card? Call (919)-372-8413 or email sales@axcontrol.com to speak to an AX Control sales representative now! We have the IS200BICIH1ADB interface card in stock in refurbished, like-new condition and may even have the unit in a brand new condition available from some surplus stock for a quick and painless purchase!

","meta_title":"The GE Mark VI IS200BICIH1ADB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICIH1ADB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICIH1ADB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICIH1ADB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 12:19:32","updated_at":"2020-03-05 16:37:41","prod_pdf":[]},{"id":53535,"part_number":"IS200BICIH1ADC","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICIH1ADC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BICIH1ADC is a GE Mark VI Bridge Interface Controller Board. This circuit board was designed as part of the MKVI platform for the control of industrial gas and steam turbine systems. The IS200BICIH1ADC uses an IGCT switching device and mounts into an Innovation Series rack along with an IS200CABP board.

The IS200BICIH1ADC has nineteen individual daughterboards soldered to its surface of two types: eight DVAA dual voltage controlled oscillator modules (IS205DVAA) and eleven analog comparator modules (IS205AOCA.) The IS200BICIH1ADC also has a digital signal processor that acts as a coprocessor for nearby DSPX board.

The IS200BICIH1ADC includes two FPGAs (field-programmable gate arrays) for logic functions, PWM timers, and control and status registers. The board has both analog and digital inputs and outputs. Some connectors are mounted into the board’s front faceplate. The faceplate also includes a removable panel that allows access to a row of TP test points.

Other components on the board include to right-angled connectors on the rear edge of the board, over forty integrated circuits, resistors, capacitors, metal oxide varistors, and diodes. The board is designed with components on both the front and rear surfaces. For additional information regarding proper handling and installation procedures, please refer to GE publications like datasheets, user guides, and manuals.

To protect static-sensitive components, we ship all circuit boards in anti-static bags. If you order an in-stock product before 3 pm it will typically ship the same day. Please refer to our shipping options page for more information regarding various carriers and modes of shipment.

","meta_title":"The GE Mark VI IS200BICIH1ADC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICIH1ADC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICIH1ADC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICIH1ADC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 12:20:51","updated_at":"2020-03-06 13:00:19","prod_pdf":[]},{"id":14483,"part_number":"IS200BICLH1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BRIDGE INTERFACE BOARD","short_desc":"The IS200BICLH1 is a GE printed circuit board","content":"

The IS200BICLH1 is a component for the Mark VI series from GE. The Mark VI is part of the Speedtronic series for gas/steam turbine management and includes Ethernet technology with 10BaseT/100BaseTX and control block language with Boolean logic represented in relay ladder diagram format. The Mark VI series has an operating temperature of 0 to 70 degrees Celsius.

The IS200BICLH1 functions as a Bridge Interface Board between Bridge Personality Interface boards (BPIA/BPIB/SCNV) and the Innovation Series Drive main control board. The IS200BICLH1 also has ambient temperature monitoring and a fan pulse width modulated speed control interface. The board mounts into a VME type rack and connects via two backplane connectors (marked P1 and P2.)

The IS200BICLH1 has a narrow front faceplate that includes the board ID, the GE logo, and a single opening. The board is marked “Install in slot 5 only.” While the board does not include any kind of LED indicators, fuses, test points, or adjustable hardware, the board does include four RTD (resistance thermal detector) sensor inputs as well as a serial 1024-bit memory device. The board has four relays, which are used for several functions.

It is important to remember to turn off power to the board and test to verify that no power exists in the board before touching it. This protects the technician and prevents electric shock from occurring. Refer to data sheets or manuals for installation instructions. If these publications have not been retained, replacement procedures can be found in GE publication GEI-100264.

","meta_title":"GE BRIDGE INTERFACE BOARD","meta_description":"GE BRIDGE INTERFACE BOARD","keywords":"GE BRIDGE INTERFACE BOARD","series_page_description":"GE BRIDGE INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 13:28:49","prod_pdf":[]},{"id":53452,"part_number":"IS200BICLH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICLH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"General Electric IGBT Drive/Source Bridge Interface Board (BICL) for the Innovation Series","content":"

The IS200BICLH1A is an IGBT Drive/Source Bridge Interface Board (BICL) created by GE for the Innovation Series.

The purpose of the IS200BICLH1A is to play a go-between an Innovation Series Drive and the Bridge Personality Interface Boards (BPIA, BPIB, or SCNV), being a primary interface between them. This board has the ability to monitor ambient and bridge temperatures. It has an interface with a PWM speed control and a system fault display. This board has a 1024-bit serial memory that is usually equipped with information about the board’s revision and identification.

The IS200BICLH1A has a nearly blank faceplate with a label that has “Install in Slot 5 Only” written on it. There are two brackets on the faceplate that can help install and remove the card from a VME type rack. Next to the brackets are two screws that help to further secure the card to the rack. There are many internal components on the actual PCB though. There are 73 resistors, 31 capacitors, 3 diodes, 15 integrated circuits, 4 relays, a metal oxide varistor, and 3 transistors. On the right edge of the board are two P1 and P2 pin connectors that connect the IS200BICLH1A to a card rack assembly.

For more information about the IS200BICLH1A, please consult the datasheet GEI-100264. It is important to slide this board into the correct slot because if it is inserted into a different slot, the wrong connection can damage the board. Anti-static procedures should be followed while handling or trying to install this board.

","meta_title":"The GE Mark VI IS200BICLH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICLH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICLH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICLH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-11 15:07:12","updated_at":"2019-12-17 09:19:14","prod_pdf":[]},{"id":14992,"part_number":"IS200BICLH1ACB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"INTERFACE PRINTED CIRCUIT BOARD GENERAL ELECTRIC","short_desc":"The IS200BICLH1ACB is a GE printed circuit board","content":"

The IS200BICLH1ACB is a PCB component manufactured by GE for the Mark VI series. The Mark VI is part of General Electric’s Speedtronic series for gas and steam turbine management. It includes a Windows-based operator interface with Ethernet and DCS communications. The MKVI has triple-redundant protections on startup, speed, temperature and shutdown controls, as well as protections like over temperature, over speed, and vibration.

The IS200BICLH1ACB is a Bridge Interface Board. This board uses its P1 and P2 connectors to plug into a VME type rack. These are the only two connectors on the IS200BICLH1ACB board. The board includes a serial 1024-bit memory device that has been programmed with board ID and revision information.

The IS200BICLH1ACB is built with a front faceplate. The faceplate includes the board identification number and the round GE logo. The bottom third of the board is marked “Install in slot 5 only.” It is important to note this board can be damaged by installation into the wrong slot.

The IS200BICLH1ACB includes four relays and four resistance thermal detector sensor inputs, or RTDs. Temperatures from the RTD can be accessed via single and dual mode.

The IS200BICLH1ACB may be damaged if board connections are removed, inserted, or adjusted while power is applied to the equipment. Replacement procedures and handling precautions can be found in GE publication GEI-100264.

AX Control provides multiple shipping options. Please speak to your sales representative about all options available, so our team can best meet your needs. Our team will protect the IS200BICLH1ACB with anti-static materials during transit to your facility.

","meta_title":"INTERFACE PRINTED CIRCUIT BOARD GENERAL ELECTRIC","meta_description":"INTERFACE PRINTED CIRCUIT BOARD GENERAL ELECTRIC","keywords":null,"series_page_description":"INTERFACE PRINTED CIRCUIT BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 11:59:27","prod_pdf":[]},{"id":53445,"part_number":"IS200BICLH1AEC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICLH1AEC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"IS200BICLH1AEC is GE created IGBT Drive/Source Bridge PCB (BICL) for the Innovation Series","content":"

The IS200BICLH1AEC is a GE created IGBT Drive/Source Bridge PCB (BICL). This board was created for the Innovation Series.

The main purpose of the IS200BICLH1AEC is to act as a go-between for an Innovation Series device and a Bridge Personality Interface PCB (BPIB, SCNV, or BPIA). The BICL normally acts as the interface between them. It uses an interface that has a system fault display and a PWM speed control. The card has a serial 1024-bit memory that possesses information about the board’s identification and revision.

The only thing on the faceplate of the IS200BICLH1AEC is a label that tells the user to install the board in Slot 5 only and two brackets. The label is important because installing the BICL card into the wrong slot could cause damage to the card or damage to the card slot. The brackets on the faceplate can help install or remove the BICL from a card rack. Next to the brackets are two screws that can be used to further secure the BICL to the rack.

There are many internal components on the IS200BICLH1AEC. There are 3 transistors, a red metal oxide varistor, 4 relays, 15 integrated circuits, 3 diodes, 31 capacitors, and 73 resistors. There are also two P1 and P2 connectors that are located on the right edge of the board. The two pin connectors attach the BICL to the card rack.

For more information about the IS200BICLH1AEC and how to install it, please refer back to the GE datasheet: GEI-100264.

","meta_title":"The GE Mark VI IS200BICLH1AEC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICLH1AEC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICLH1AEC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICLH1AEC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-10 12:29:44","updated_at":"2019-12-18 09:19:50","prod_pdf":[]},{"id":53553,"part_number":"IS200BICLH1AFD","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICLH1AFD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BICLH1AFD is a circuit board component made by General Electric as part of their Speedtronic Mark VI system. The MKVI was designed by GE for the management of industrial steam or gas turbines and included Ethernet and DCS communications from a windows-based operating system. Like most Speedtronic systems of later iterations (Mark IV forward), the Mark VI is designed with triple-redundant modular protection capability for important controls like temperature, speed, overspeed, and vibration.

The IS200BICLH1AFD functions as an IGBT Drive/Source Bridge Interface Board. It plugs into a VME type rack using its P1 and P2 connectors, which are the only two connectors on the board.

The IS200BICLH1AFD has a 1024 bit serial memory device for board ID and revision information. The board is designed with four relays, four RTDs (for thermal detection,) as well as various integrated circuits, transistors, capacitors, and resistors. The board’s front faceplate connects via two screw mounts and is blank.

Please note the IS200BICLH1AFD is designed to install in slot five only and may be damaged if installed incorrectly. Do not insert or adjust board connections while the board is powered up. Proper handling and installation procedures can be found in the original GE manual. If this is unavailable to you, please let us know when you place your order as we may be able to help.

AX Control ships products around the world to any location not currently under US embargo. If you order before 3 pm our time we will try to get the product out to you that day. Our team protects all static sensitive products with anti-static bags to protect from damage during shipment.

","meta_title":"The GE Mark VI IS200BICLH1AFD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICLH1AFD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICLH1AFD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICLH1AFD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 15:57:24","updated_at":"2020-03-06 13:28:48","prod_pdf":[]},{"id":53551,"part_number":"IS200BICLH1AFE","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICLH1AFE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BICLH1AFE is a Bridge Interface Controller Board. It is part of the GE Industrial Systems’ Mark VI Speedtronic line. The Mark VI was designed to offer triple modular redundant control to industrial gas and steam turbines.

The IS200BICLH1AFE is used to interconnect the Innovation Series main control board and a BPIA bridge personality interface board. It also is responsible for ambient temperature monitoring, speed control interface, and fan control. The control logic on the IS200BICLH1AFE comes from the CPU of the main control board.

The IS200BICLH1AFE plugs into a VME rack using its P1 and P2 connectors. The front panel of the board is blank, barring two clips that help lock the board into place and a notation stating the user should “install in slot 5 only.”

The IS200BICLH1AFE is designed with the aforementioned backplane connectors (P1 and P2) as well as four relays, over 18 resistors, 30 capacitors, and a dozen integrated circuits. It also has several transistors. The board surface is marked with the board identification number, a barcode, and several other codes. Most components are marked for easy identification.

The IS200BICLH1AFE will be shipped in a protective anti-static bag to keep it from any incidental damage during shipping. Most orders placed before 3 pm will be shipped out to you on the same day. If expedited shipping is desired, please let us know. We ship around the world.

For more information about installation or handling procedures regarding the IS200BICLH1AFE, please refer to manuals or data sheets originally provided by the OEM.

","meta_title":"The GE Mark VI IS200BICLH1AFE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICLH1AFE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICLH1AFE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICLH1AFE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 15:51:04","updated_at":"2020-03-09 10:28:20","prod_pdf":[]},{"id":14484,"part_number":"IS200BICLH1B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE BRIDGE INTERFACE CARD","short_desc":"The IS200BICLH1B is a GE printed circuit board","content":"

The IS200BICLH1B is a printed circuit board designed as a component for the Mark VI series. This series is part of the Speedtronic line from General Electric, which has been managing steam or gas turbine systems since the 1960s. The Mark VI is built with a Windows-based operator interface. It has DCS and Ethernet communications.

The IS200BICLH1B is a Bridge Interface Board. This provides an interface between Bridge Personality Interface boards like BPIA/BPIB and the main control board of the Innovation Series Drive. This board has an MA Sense Input with a voltage of 24-115 V ac/dc and loading of 4-10 milliamps.

The IS200BICLH1B is built with a faceplate. This narrow black colored panel is inscribed with the board id number, the manufacturer logo, and has one opening. The board is marked “Install in slot 5 only” on its bottom third. The board is built with four relays. Each relay is printed with a relay diagram on its upper surface. The board also has a serial 1024-bit memory device. The board does not include any fuses, test points, LEDs, or adjustable hardware.

The IS200BICLH1B may be damaged if connections to the board are adjusted, removed, or inserted while power is still applied to the board. Handling precautions and replacement procedures are published in GEI-100264.

The IS200BICLH1B will be protected by anti-static material during shipment to protect from static discharge. Your sales representative will help you choose your best shipping option from our various carriers. AX Control can ship many in-stock parts as quickly as next day. We ship everywhere around the globe not currently affected by US embargo.

","meta_title":"MARK VI GE BRIDGE INTERFACE CARD","meta_description":"MARK VI GE BRIDGE INTERFACE CARD","keywords":null,"series_page_description":"MARK VI GE BRIDGE INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-28 12:43:56","prod_pdf":[]},{"id":14993,"part_number":"IS200BICLH1BAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GE MARK VI MODULE","short_desc":"The IS200BICLH1BAA is a GE printed circuit board","content":"

The IS200BICLH1BAA is a GE printed circuit board manufactured as a component for the Mark VI series. The Mark VI is the fifth iteration of GE’s Speedtronic series for gas and steam turbine management. The MKVI is designed with close coordination between hardware and software, starting with a control module with a 13- or 21-slot VME card rack. Mark VI series is available in Simplex and Triple redundant forms for small applications and for large integrated systems with modules ranging from one to many.

The IS200BICLH1BAA functions as an IGBT Drive/Source Bridge Interface board. The board interfaces between the main control board and boards like the BPIA/BPIB or the SCNV board. The IS200BICLH1BAA also provides bridge and ambient temperature monitoring, as well as a panel and system fault string interface. Control logic on the IS200BICLH1BAA is configured in the CPU of the main control board using an electronically programmable logic device, or EPLD.

The IS200BICLH1BAA is built with two backplane connectors. These are marked P1 and P2. These plug into a VME type rack. No other connectors are located on the board. The board has very few components but does have a serial 1024-bit memory device, as well as four relays. Each relay has a relay diagram printed on its top surface. The board has no test points, fuses, or adjustable hardware.

Our warehouse team will protect the IS200BICLH1BAA with anti-static material during shipment to your facility. The board should be treated as static-sensitive at all times. Installation procedures can be found in GE publication GEI-100264.

","meta_title":"GENERAL ELECTRIC GE MARK VI MODULE","meta_description":"GENERAL ELECTRIC GE MARK VI MODULE","keywords":null,"series_page_description":"GENERAL ELECTRIC GE MARK VI MODULE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:00:16","prod_pdf":[]},{"id":53550,"part_number":"IS200BICLH1BBA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICLH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BICLH1BBA is part of the Mark VI series from GE. It functions as a Bridge Interface Board and is used to provide an interface between the BPIA Bridge Personality Interface and the Innovation Series Drive main control. MKVI Speedtronic systems are primarily used for control of industrial gas and steam turbine systems.

The IS200BICLH1BBA is responsible for multiple functions within the system. This includes processes like fan control, speed control, and temperature monitoring. The board has four RTD sensor inputs to maintain these processes. Control logic for these functions comes from an electronically programmable logic device configured from the CPU. Additionally, there is a serial 1024-bit memory device located on the surface of the IS200BICLH1BBA that maintains the board ID and revision information.

The IS200BICLH1BBA is designed with two backplane connectors (P1 and P2.) These connect the board into a VME type rack. These are the only connections on the BICL board. The board is designed with a blank front panel with two clips that lock the unit into place. The front panel is marked with the GE logo, with the board number, and with the caution to “Install in Slot 5 only.” Installation in the wrong slot may damage the board. The IS200BICLH1BBA board is populated with four relays, three bridge rectifiers, over a dozen integrated circuits, and various capacitors, resistors, and diodes. The board also has several transistors. It is marked with the board id number and the code 6BA0.

For more information about the IS200BICLH1BBA, including installation and handling procedures, please refer to original manuals or datasheets provided by the manufacturer.

","meta_title":"The GE Mark VI IS200BICLH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BICLH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BICLH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BICLH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 15:04:49","updated_at":"2020-03-09 10:46:18","prod_pdf":[]},{"id":14485,"part_number":"IS200BICMH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE IGBT GATE DRIVER BOARD","short_desc":"The IS200BICMH1 is a GE printed circuit board","content":"

The IS200BICMH1 is a GE printed circuit board component manufactured by GE for their Mark VI series. This series is one of the later Speedtronic systems for gas and steam turbine management. The MKVI includes a PC-based operator interface loaded with proprietary software.

The IS200BICMH1 is built with a front faceplate. The front faceplate includes the board ID and the GE logo. The faceplate has two narrow openings that allow the user to have access to several TP test points. These test points line up with the following labels on the faceplate: 1A/1B/1C/VAB/VBC/VDCP/VMG/VDCN/ACOM (first opening,) DA1/DA2/DA3/DA4/TRG1/TRG2/ACOM (second opening.) It is important to note test points line up with the last three labels on the second opening, but no test points are behind DA1 through DA4. The board has several other test points located at other locations on the board.

The IS200BICMH1 has several board connectors, including two backplane connectors, labeled P1 and P2. The board has three vertical male pin connectors marked POD1 through POD3, as well as another ten-pin vertical male connector marked JTAG. The board is built with three relays. These are marked K1 through K3.

The IS200BICMH1 is built with multiple LEDs, and carries over 300 resistors, 150 capacitors, and 100 integrated circuits. The board also has five resistor network arrays and a metal oxide varistor. The board is marked with the code 6BA02.

Our team will protect the IS200BICMH1 with an antistatic product during shipment to protect from any possible damage. Please review manuals or datasheets for safety procedures before removing the part from shipping material. Our sales team will help you determine your best shipping options.

","meta_title":"GE IGBT GATE DRIVER BOARD","meta_description":"GE IGBT GATE DRIVER BOARD","keywords":"GE IGBT GATE DRIVER BOARD","series_page_description":"GE IGBT GATE DRIVER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 11:38:33","prod_pdf":[]},{"id":14486,"part_number":"IS200BICMH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI IGBT GATE DRIVER GE CARD","short_desc":"The IS200BICMH1A is a GE printed circuit board","content":"

The IS200BICMH1A is a GE printed circuit board created by GE for the Mark VI series. The Mark VI is part of GE’s Speedtronic series, which has been used for the management of gas and steam turbine systems of various size and complexity since the late 1960s.

The IS200BICMH1A has a front faceplate designed with two narrow openings. The front faceplate is labeled with the board ID number and the GE logo. It also states the proper slot to insert the board into. The IS200BICMH1A can be damaged if inserted into the improper rack location. The faceplate is designed to give access to user TP test points. These are located directly behind the narrow openings on the panel, and line up with corresponding labels located to the right of the opening. These labels include 1A, 1B, 1C, VAB, VBC, VDCP, VMG, VDCN, and ACOM next to the first opening, and DA1 through DA4, TRG1, TRG, and ACOM next to the second opening. TP1 through TP9 line up behind the first opening and TP14 through TP16 are behind the second. Many other test points are located at other points on the board.

Board connectors on the IS200BICMH1A include two backplane connectors (P1/P2,) and four vertical male pin connectors. Three of these are placed side by side and are labeled POD1, POD2, and POD3. The last connector is located directly behind the front faceplate. It is a ten-pin connector.

The IS200BICMH1A has over 150 capacitors, 300 resistors, and 100 integrated circuits. The board has been built with a single metal oxide varistor and five resistor network arrays. The board carries the code 6BA02 just above the board number.

","meta_title":"MARK VI IGBT GATE DRIVER GE CARD","meta_description":"MARK VI IGBT GATE DRIVER GE CARD","keywords":"["MARK VI IGBT GATE DRIVER GE CARD"]","series_page_description":"MARK VI IGBT GATE DRIVER GE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-27 13:22:08","prod_pdf":[]},{"id":53355,"part_number":"IS200BICMH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":3,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BICMH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","short_desc":null,"content":"

The IS200BICMH1AAA circuit board is a printed circuit board that was made to be part of the GE Mark VI SPEEDTRONIC series. The IS200BICMH1AAA was designed and manufactured by General Electric. The GE Mark VI SPEEDTRONIC series was created to be a state-of-the-art control for General Electric turbines, which have a lineage of more than thirty years of successful operation. The series was created with the thought of bringing an integration of control, protection, and monitoring systems for generator and mechanical drive applications of both gas and steam turbines. Additionally, the GE Mark VI SPEEDTRONIC series is a platform created to integrate all power island and balance-of-plant control, bringing more convenience than ever to the user.

The IS200BICMH1AAA printed circuit board is a thin, rectangular circuit board made to be used in one General Electric’s turbines. On the IS200BICMH1AAA printed circuit board’s faceplate, there is an LED indicator light at the top with white text to the right of it which reads, “IMOK.” Below that, there are two long, thin, rectangular holes. This top hole has many labels down the right side, which read as follows: “IA,” “IB,” “IC,” “VAB,” “VBC,” “VDCP,” “VMID,” “VDCN,” “ACOM.” The bottom hole also has many labels down the right side, which read as follows: “DA1,” “DA2,” “DA3,” “DA4,” “TRG1,” “TRG2,” “ACOM.” At the bottom of the faceplate, there is white text which reads, “INSTALL IN SLOT 5 ONLY.” As this suggests, the IS200BICMH1AAA circuit is intended to be installed only inside of slot 5 of a GE rack assembly.

Interested in the IS200BICMH1AAA printed circuit board? Call us today using the phone number (919)-372-8413 to talk to one of our friendly, knowledgeable sales representatives! We are always here to help!

","meta_title":"The GE Mark VI IS200BICMH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","meta_description":"The GE Mark VI IS200BICMH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","keywords":"["The GE Mark VI IS200BICMH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s Speedtronic series."]","series_page_description":"The GE Mark VI IS200BICMH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-07-18 14:46:02","updated_at":"2019-11-02 12:02:27","prod_pdf":[]},{"id":14487,"part_number":"IS200BICRH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BRIDGE INTERFACE MARK VI CARD","short_desc":"The IS200BICRH1 is a GE printed circuit board","content":"

The IS200BICRH1 is a PCB component manufactured by General Electric for the Mark VI series. The Mark VI is part of the successful Speedtronic series that began in the 1960s with the development and release of the MKI. GE spent decades developing and improving the Speedtronic system, always with the goal of creating reliable, user-friendly systems for the management of their heavy-duty steam and gas turbines. The Mark VI is one of the later iterations of this research, with a PC-based operator interface using a Windows platform loaded with proprietary software like the GE Control System Toolbox. The Mark VI is available in both Triple Redundant and Simplex form.

The IS200BICRH1 functions as a Bridge Interface Board. It is designed for use within Innovation Series Medium Voltage - GP, Type H drives. The IS200BICRH1 provides an interface between the drive control and the bridge.

The IS200BICRH1 is built with eight optically isolated digital inputs and outputs, one 0-10 V analog feedback input, and two 0-20 mA analog feedback inputs. The board’s P2 connector is used for logic power supply and control board interface connections. The P1 connector is used for isolated I/O, fault string, and bridge control.

The IS200BICRH1 has eight solid state relay outputs routed to the CTBC terminal board through the CABP board. The relay outputs are optically isolated from the control. The output from each relay is indicated by a yellow LED.

The IS200BICRH1 includes two terminal boards (TB1/TB2) located in the front panel, two backplane connectors (P1/P2) eight user TP test points, eighteen light emitting diodes, and two fuses. All user TP test points are accessible through an opening in the board’s faceplate.

","meta_title":"GE BRIDGE INTERFACE MARK VI CARD","meta_description":"GE BRIDGE INTERFACE MARK VI CARD","keywords":"GE BRIDGE INTERFACE MARK VI CARD","series_page_description":"GE BRIDGE INTERFACE MARK VI CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 10:10:59","prod_pdf":[]},{"id":14488,"part_number":"IS200BICRH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI BRIDGE INTERFACE ROB GENERAL ELECTRIC","short_desc":"The IS200BICRH1A is a GE printed circuit board","content":"

The IS200BICRH1A is a GE printed circuit board component manufactured for their Mark VI system. The MKVI is the fifth release of the successful Speedtronic series for gas/steam turbine management. This series has been in use since the release of the Mark I in the 1960s. Since then, General Electric has developed and improved several new versions of the Speedtronic management system using the best technology available at the time of release. The Mark VI has a Windows PC-based operator interface loaded with proprietary software from GE like their Control System Toolbox and Cimplicity graphics.

The IS200BICRH1A functions within the Mark VI system as a bridge interface board. This board is used in Innovation Series Medium Voltage/GP Type H drives and provides an interface between the bridge and the drive control.

The IS200BICRH1A has eight digital optically isolated inputs and outputs. It has three analog feedback inputs, including one at 0-10V and two at 0-20 mA. The backplane connector marked P1 is used for fault string, isolated I/O and bridge control. The backplane connector marked P2 is used for control board interface and logic power supply connections.

The IS200BICRH1A includes eight relay outputs (solid state) that route to the CTBC terminal board through a CABP board. Each of these outputs is indicated by a yellow LED and is optically isolated from the control.

The IS200BICRH1A has two terminal boards mounted in the front faceplate. These are marked TB1 and TB2. The board has two backplane connectors, eighteen LEDs, two fuses, and eight user TP test points. The board has more test points, they are not relevant to the end user. All test points for the end-user are accessible via an opening in the board’s front faceplate.

","meta_title":"MARK VI BRIDGE INTERFACE ROB GENERAL ELECTRIC","meta_description":"MARK VI BRIDGE INTERFACE ROB GENERAL ELECTRIC","keywords":"MARK VI BRIDGE INTERFACE ROB GENERAL ELECTRIC","series_page_description":"MARK VI BRIDGE INTERFACE ROB GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 10:37:46","prod_pdf":[]},{"id":14489,"part_number":"IS200BLIGH1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BIC LAN INTERFACE BOARD","short_desc":"The IS200BLIGH1 is a GE printed circuit board","content":"

The IS200BLIGH1 is a PCB component manufactured by GE as part of their Mark VI series. The Mark VI is a later iteration of the successful Speedtronic series for gas and steam turbine management that has been produced by GE since the late 1960s.

The IS200BLIGH1 is a LAN Interface-Genius Board. This board makes up half of the Auxiliary Bus Interface Module that provides an I/O block on the Genius bus to provide integration between the controller and the drive. The other half of the Auxiliary Bus Interface Module is an IC660ELB912 μ GENI Network Interface Board. This board mounts to the IS200BLIGH1 using four standoffs. Communications between the two boards occur through the P1 and P2 connectors. There is a total of five board connectors including the P8 backplane connector.

The IS200BLIGH1 includes two LED indicators (OK and COMM OK.) These are located on the board’s faceplate. A third LED is located on the board’s surface. This LED indicates power in the P5 power supply. The faceplate also includes a Genius LAN connector. The board has two test points (TP1 and TP2) that are designed for engineering test use only.

The IS200BLIGH1 is built with a number of integrated circuits. The GBIA module has no fuses or user test points. Board connections should not be removed, inserted, or adjusted while power is applied to the equipment. This may damage equipment. Please be sure power is turned off to equipment before replacing or maintaining this equipment. Only trained personnel should handle Mark VI components.

","meta_title":"GENERAL ELECTRIC BIC LAN INTERFACE BOARD","meta_description":"GENERAL ELECTRIC BIC LAN INTERFACE BOARD","keywords":"GENERAL ELECTRIC BIC LAN INTERFACE BOARD","series_page_description":"GENERAL ELECTRIC BIC LAN INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 08:37:03","prod_pdf":[]},{"id":14490,"part_number":"IS200BLIGH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE BIC LAN INTERFACE CARD","short_desc":"The IS200BLIGH1A is a GE printed circuit board","content":"

The IS200BLIGH1A is a circuit board component manufactured by GE for the Speedtronic Mark VI series. The MKVI has a PC-based operator interface loaded with proprietary software like the GE Control System Toolbox and Cimplicity Graphics. The MKVI supports Ethernet communications.

The IS200BLIGH1A functions as a LAN Interface-GENIUS board. This board makes up half of the Auxiliary Profibus-DP Interface Module (IS215PBIAH_A__.) This module is designed as an I/O block on a Profibus-DP network to provide integration between the drive and the controller. The other half of this module is a Universal Communications System Profibus-DP board (manufactured by SST Inc.) This module connects to the CABP Cable Assembly Backplane board within the board rack.

The IS200BLIGH1A is built with five board connectors. This includes the P8 backplane connector, the P1 and P2 connectors, which are not defined, and the P3 connector. The UCS board mounts on four standoffs and interfaces through the P3 connector, which is used to transfer all data, digital address, and control signals between the two boards.

The IS200BLIGH1A has three LED indicators, including two located on its front panel. These two front panel indicators are “OK” and “DIAGNOSTIC.” The third LED indicates power status to the P5 power supply.

The IS200BLIGH1A has one jumper (JP1) that should not be inserted by the user. It is worth noting that test points TP1 and TP2, as well as connectors J1 and J2, are designed for engineering test use only. More information on the IS200BLIGH1A board or the IS215PBIAH module can be found in GE publication GEI-100419.

","meta_title":"MARK VI GE BIC LAN INTERFACE CARD","meta_description":"MARK VI GE BIC LAN INTERFACE CARD","keywords":"MARK VI GE BIC LAN INTERFACE CARD","series_page_description":"MARK VI GE BIC LAN INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 09:13:08","prod_pdf":[]},{"id":16114,"part_number":"IS200BLIGH1AAB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE BIC LAN INTERFACE CARD","short_desc":"The IS200BLIGH1AAB is a GE printed circuit board","content":"

The IS200BLIGH1AAB is a GE printed circuit board component designed for the Mark VI series. The Mark VI is part of the Speedtronic series, which began in the 1960s with the release of the Mark I and which has continued to improve since that time with ever more technologically advanced systems. The Mark VI includes a PC-based operator interface with Ethernet capabilities.

The IS200BLIGH1AAB functions as a LAN Interface-GENIUS board. This board is used to make up half of both the Auxiliary Genius BUS Interface Module (IS215GBIAH) and the Auxiliary Profibus-DP Interface Module (IS215PBIAH.) Both modules perform the same task: to provide integration between the drive and the controller, but on different types of networks. The setup of the card and the secondary card that will complete the module will depend on the type of network the user is currently running.

The IS200BLIGH1AAB is designed with five board connectors. These include the P8 backplane connector, which connects the board into the rack system. The P1, P2, and P3 connectors are used to connect the board to secondary cards. Some connectors are not used in certain setups. Secondary cards are mounted to the IS200BLIGH1AAB using standoffs.

The IS200BLIGH1AAB is built with three LED (light emitting diodes,) including two that are located on its front panel. One of these indicators is labeled “OK” on both modules. The second LED may be labeled either “COMM OK” or “DIAGNOSTIC.” The third LED is located on the surface of the board, and indicates power to the P5 power supply. More information on this board and the completed modules may be found in GE publications GEI-100419 and GEI-100269.

","meta_title":"MARK VI GE BIC LAN INTERFACE CARD","meta_description":"MARK VI GE BIC LAN INTERFACE CARD","keywords":null,"series_page_description":"MARK VI GE BIC LAN INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:03:15","prod_pdf":[]},{"id":14491,"part_number":"IS200BPIAG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BOP ANA BOARD MARK VI","short_desc":"The IS200BPIAG1 is a GE printed circuit board","content":"

The IS200BPIAG1 is a circuit board component manufactured by GE for the Mark VI series. This series is the fifth from General Electric in their Speedtronic series for gas and steam turbine management. The MKVI is built with an HMI (human machine interface) based on a Windows PC with client/server capability running CIMPLICITY graphics display system, with the GE Control System Toolbox for maintenance applications. The MKVI can be built with control systems with triple redundant or simplex forms, depending on the needs and size of the system.

The IS200BPIAG1 functions as a Bridge Personality Interface Board, which allows for an interface between the control and power electronics of an IGBT 3-phase ac drive. This includes three isolated VCO feedback circuits that monitor the dc link, six isolated IGBT gate driver circuits, VAB, and VBC output voltages.

The IS200BPIAG1 has nine isolated power supplies. These are derived from secondaries of the three transformers located on the board, one per phase. The board has six plug connectors located near the transformers. These connect to the phase A, B, and C IGBTs. The board also has a single backplane connector that plugs the board into the rack system. High speed and fail-safe disable lines for fault control and gate driver disable are also provided through this connector.

The IS200BPIAG1 is built with a narrow front panel that is marked with the proper rack installation slot. Damage to the board may occur if the board is improperly installed. The board includes a serial 1024-bit memory device for board id and revision information. The board also includes nine resistor network arrays, multiple integrated circuits, metal film resistors, transistors, and capacitors of various materials.

Please refer to manuals or data sheets for handling precautions and installation procedures. If these publications have not been retained, this information can be found in GE publication GEI-100265.

","meta_title":"GE BOP ANA BOARD MARK VI ","meta_description":"GE BOP ANA BOARD MARK VI ","keywords":"GE BOP ANA BOARD MARK VI ","series_page_description":"GE BOP ANA BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 09:31:00","prod_pdf":[]},{"id":14492,"part_number":"IS200BPIAG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BALANCE OF PLANT GE ANA MARK VI CARD","short_desc":"The IS200BPIAG1A is a GE printed circuit board","content":"

The IS200BPIAG1A is a PCB created by GE for the Mark VI series. The MKVI is the fifth Speedtronic series for gas/steam heavy-duty turbine management developed by General Electric. The MKVI is built around a 13- or 21- slot VME card rack Control Module that receives inputs through termination boards. Data transfer between the Control Module and other Mark VI modules is performed on IONet using Ethernet 10Base2 network to slave stations.

The IS200BPIAG1A is designed to function as a Bridge Personality Interface Board. This allows for a connection between the control and power electronics of the IGBT three-phase drive.

The IS200BPIAG1A is built with a faceplate. This narrow faceplate includes the board id, the manufacturer logo, and the statement “Install in slot 6 only.” The IS200BPIAG1A plugs into a VME type rack via its P1 connector. The board can be damaged if it is plugged into the wrong slot. The board also includes six additional male vertical pin connectors that are used to connect to phase A, B, and C IGBTs.

The IS200BPIAG1A does not include any adjustable hardware, fuses, or test points. It does have three transformers, nine resistor network arrays, six transistors, and multiple capacitors and resistors. It also has a 1024-bit memory chip that has been programmed with revision information and board identification.

The IS200BPIAG1A should be treated at all times as a static-sensitive board. Please use special handling techniques such as using a grounding strap when handling board or board components. AX Control will ship the IS200BPIAG1A in an antistatic bag to avoid damage from discharge during transit.

","meta_title":"BALANCE OF PLANT GE ANA MARK VI CARD","meta_description":"BALANCE OF PLANT GE ANA MARK VI CARD","keywords":"BALANCE OF PLANT GE ANA MARK VI CARD","series_page_description":"BALANCE OF PLANT GE ANA MARK VI CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 09:30:07","prod_pdf":[]},{"id":15022,"part_number":"IS200BPIAG1AEB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"INTERFACE BOARD GENERAL ELECTRIC MARK VI","short_desc":"The IS200BPIAG1AEB is a GE printed circuit board","content":"

The IS200BPIAG1AEB is a Drive Bridge Personality Interface Card manufactured by General Electric for their Mark VI series. The MKVI is one of the most recent steam/gas heavy-duty turbine management systems in the Speedtronic line released by GE. The MKVI offers complete control, protection, and monitoring of heavy-duty turbine systems, and is adaptable and scalable for the use in a variety of applications. The MKVI is based around a 13- or 21- slot VME card rack Control Module.

The IS200BPIAG1AEB provides a connection between the control and power electronics of an IGBT ac drive. The IS200BPIAG1AEB is designed with seven board connectors. This includes its primary P1 connector that connects into the rack system and handles a variety of signals, including gate drive and shunt fault signals, application data from the BPIA board, and some bridge control connections. The board has six other male vertical pin connectors (APL, BPL, CPL, AAPL, BAPL, CAPL,) that provide connections to the phase A/B/C IGBTs.

The IS200BPIAG1AEB has three transformers, six transistors, and nine resistor network arrays. It also has a 1024-bit memory device to hold revision and board information.

The IS200BPIAG1AEB has a faceplate. This helps to identify the board within the rack, and also is marked with the board location. If the board is plugged into the wrong slot it may become damaged. Please follow installation guidelines as written in manuals or data sheets.

The IS200BPIAG1AEB is a static-sensitive board. AX Control will ship this board in an antistatic bag to protect the board from damage during transit. Please follow all handling precautions as recommended by the manufacturer. If these are unavailable to you, they may be found within GE publication GEI-100265.

","meta_title":"INTERFACE BOARD GENERAL ELECTRIC MARK VI","meta_description":"INTERFACE BOARD GENERAL ELECTRIC MARK VI","keywords":null,"series_page_description":"INTERFACE BOARD GENERAL ELECTRIC MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:03:55","prod_pdf":[]},{"id":14493,"part_number":"IS200BPIBG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PHASE LOGIC INTERFACE CARD","short_desc":"The IS200BPIBG1 is a Mark VI printed circuit board","content":"

The IS200BPIBG1 is a Phase Logic Module manufactured by GE for the Mark VI system. The MKVI is one of General Electric’s Speedtronic gas and steam turbine management series.

The IS200BPIBG1 captures faults discovered by the Gate Driver boards and reports the faults. Some of these faults are processed on the IS200BPIBG1 board. The board also provides the signal conditioning needed to interface P1 connector logic signal controls to Gate Driver and Shunt Feedback boards.

The IS200BPIBG1 is built with a narrow front faceplate. The board plugs into a VME type rack using the P1 connector located on the rear edge of the board. The board connects to various IGBT boards using six plug connectors located on the board. The board also uses five stab-on connectors to detect Phase A, B, and C sensing signals and dc link negative and positive signals. Most stab connections are located directly behind the faceplate. The IS200BPIBG1 has no test points, fuses, or LED indicators.

The IS200BPIBG1 includes a serial 1024-bit memory device. Memory is programmed with board identification and revision information. The board has three transformers, sixteen resistor network arrays, three transistors, and over thirty integrated circuits. Most resistors on the board are made of metal film.

The IS200BPIBG1 is drilled in all four corners. The board number is marked on one edge. All components carry a number and a reference designator. Refer to retained manuals or other publications for information pertaining to installation. Please follow all manufacturer suggested safety procedures. Only properly trained personnel should install or maintain MKVI equipment.

","meta_title":"GENERAL ELECTRIC PHASE LOGIC INTERFACE CARD","meta_description":"GENERAL ELECTRIC PHASE LOGIC INTERFACE CARD","keywords":"GENERAL ELECTRIC PHASE LOGIC INTERFACE CARD","series_page_description":"GENERAL ELECTRIC PHASE LOGIC INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-21 11:33:03","prod_pdf":[]},{"id":14494,"part_number":"IS200BPIBG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI PHASE LOGIC INTERFACE BOARD","short_desc":"The IS200BPIBG1A is a Mark VI printed circuit board","content":"

The IS200BPIBG1A is a GE printed circuit board component that acts as a Phase Logic module within the Mark VI series. The Mark VI is one of the later Speedtronic systems for gas and steam turbine management released by General Electric. These systems have been used for heavy-duty turbine management since the late 1960s.

The IS200BPIBG1A is designed to capture faults found by the Gate Driver boards and report those faults to the boards that will process them. Some faults are processed by the IS200BPIBG1A. The board is also used to provide signal conditioning to interface P1 connector logic signal controls to Shunt Feedback and Gate Driver boards.

The IS200BPIBG1A is designed with a narrow black front faceplate. This board has the GE logo imprinted on it. The IS200BPIBG1A is designed to plug into a VME type rack. This happens via the P1 connector located on the rear edge of the board. The board also connects to several IGBT boards via six plug connectors. Five stab-on connectors (located behind the front faceplate,) are used to detect Phase A/B/C sensing signals and DC-link positive and negative signals. It is worth noting the IS200BPIBG1A has no LED indicators, fuses, or TP test points.

The IS200BPIBG1A has a serial 1024-bit memory chip to keep track of the board identification and revision information. The board also has over thirty other integrated circuits, including oscillating chips. It has four transistors, three transformers, and sixteen resistor network arrays. The majority of resistors used on this board are made of metal film material.

Please refer to retained manuals or data sheets for installation information. GE provided all technical support for the IS200BPIBG1A.

","meta_title":"GE MARK VI PHASE LOGIC INTERFACE BOARD","meta_description":"GE MARK VI PHASE LOGIC INTERFACE BOARD","keywords":"GE MARK VI PHASE LOGIC INTERFACE BOARD","series_page_description":"GE MARK VI PHASE LOGIC INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-21 12:01:30","prod_pdf":[]},{"id":53368,"part_number":"IS200BPIBG1AEB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200BPIBG1AEB is a printed circuit board component that acts as a phase logic module within the GE Mark VI Speedtronic Series.","short_desc":null,"content":null,"meta_title":"The GE IS200BPIBG1AEB is a printed circuit board component that acts as a phase logic module within the GE Mark VI Speedtronic Series.","meta_description":"The GE IS200BPIBG1AEB is a printed circuit board component that acts as a phase logic module within the GE Mark VI Speedtronic Series.","keywords":"["The GE IS200BPIBG1AEB is a printed circuit board component that acts as a phase logic module within the GE Mark VI Speedtronic Series."]","series_page_description":"The GE IS200BPIBG1AEB is a printed circuit board component that acts as a phase logic module within the GE Mark VI Speedtronic Series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-09-27 09:56:09","updated_at":"2019-09-27 09:56:09","prod_pdf":[]},{"id":14495,"part_number":"IS200BPIHH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BRIDGE INTERFACE AND CONTROL BOARD TO FOSB","short_desc":"The IS200BPIHH1 is a GE printed circuit board","content":"

The IS200BPIHH1 is a Bridge Personality Interface Card for the GE Mark VI series for gas and steam turbine management system. The Mark VI is one of the newest of the Speedtronic series released by GE. These systems have a long history of reliable management of heavy-duty turbine systems of varying size and complexity. The Mark VI is designed to be adaptable to many applications and offers complete monitoring, control, and protection of the turbine system.

The BPIH card is designed to connect into the Control Assembly Backplane (CABP) to communicate to the H-Bridge Interface and Control board (BICH) through the CABP signal paths. Most of the BICH board’s bridge I/O’s route through the BPIH card subassembly to the Fiber Optic Interface card (FOSB.) The control signals buffer on the BPIH card subassembly and are interfaced with the FOSB array.

The IS200BPIHH1 is built with two backplane connectors, marked P1 and P2. The board has three plug connectors on the front edge of the board, marked JA, JB, and JC. These connectors are mounted into the front faceplate.

The IS200BPIHH1 has nineteen integrated circuits. These are located in a single line of eighteen circuits located behind the three plug connectors. There is also four ‘test points’ that each consist of two lines of plated through-holes. These are labeled as TPA, TPB, TPX, and TPC.

The IS200BPIHH1 is designed to be part of an Innovation Series rack system. These cards must be inserted into the proper slot to avoid damage to electronics. Please follow all installation procedures as written in manufacturer manuals and data sheets.

","meta_title":"GE BRIDGE INTERFACE AND CONTROL BOARD TO FOSB","meta_description":"GE BRIDGE INTERFACE AND CONTROL BOARD TO FOSB","keywords":"GE BRIDGE INTERFACE AND CONTROL BOARD TO FOSB","series_page_description":"GE BRIDGE INTERFACE AND CONTROL BOARD TO FOSB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 13:34:48","prod_pdf":[]},{"id":14496,"part_number":"IS200BPIHH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BICH TO FIBER-OPTIC SB INTERFACE GE MARK VI","short_desc":"The IS200BPIHH1A is a GE printed circuit board","content":"

The IS200BPIHH1A is designed as a Bridge Personality Interface Board that fits into the Mark VI series from GE. The Mark VI is part of the Speedtronic series for steam/gas turbine management system. The Speedtronic series has been managing heavy-duty turbines since the MKI was released in the late 1960s, with ever-increasing complexity and reliability. The MKVI uses a Windows-based operator interface with Ethernet capability.

The IS200BPIHH1A has been designed to connect to the (CABP) Control Assembly Backplane in order to communicate with the (BICH) H-Bridge Interface and Control Board. Much of the Input/Output from the Bridge Interface and Control board’s bridge routes through the subassembly on the IS200BPIHH1A to the FOSB Fiber-Optic Interface board.

Two backplane connectors are located on the IS200BPIHH1A. These are marked P1 and P2. The board also has three other connectors, marked JA through JC. These are plug connectors for the BPIH subassembly, and they mount into the faceplate connected to the circuit board.

The IS200BPIHH1A has a line of eighteen integrated circuits with a final integrated circuit placed located near the center of the board. The board has four sets of plated through-holes that are marked as TPC, TPX, TPB, and TPA.

The IS200BPIHH1A fits into an Innovation series rack system. The Innovation Series is designed to be placed in specific rack slots. Placing the IS200BPIHH1A in the incorrect slot may damage the board or board components. Please follow all replacement procedures as specified by the manufacturer in publications like data sheets and manuals. If these publications have not been retained, this information may be found in GE publication GEI-100417.

","meta_title":"BICH TO FIBER-OPTIC SB INTERFACE GE MARK VI","meta_description":"BICH TO FIBER-OPTIC SB INTERFACE GE MARK VI","keywords":null,"series_page_description":"BICH TO FIBER-OPTIC SB INTERFACE GE MARK VI","quote_description":null,"inventory_notes":"stole box for 1 ","cross_reference":"","created_at":null,"updated_at":"2020-02-28 14:21:54","prod_pdf":[]},{"id":53393,"part_number":"IS200BPIHH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200BPIHH1AAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"

The IS200BPIHH1AAA is a Bridge Personality Interface Board subassembly that is part of the GE Mark VI Speedtronic system for the control of gas and steam turbine system. The Mark VI is one of the final Speedtronic systems developed by GE in a long line of systems that have offered reliable control for industrial systems for decades.

The IS200BPIHH1AAA is used in Innovation Series drives and connects into a CABP board where it communicates through that and other boards. The BPIH board buffers control signals for the BICH board before they interface with the FOSB fiber-optic array. The board’s subassembly acts as a RS-422 interface distributor for phase-related signals as they come and go from the BICH and FOSB boards.

The IS200BPIHH1AAA board has a limited number of components. The board is designed with two backplane connectors (P1 and P2) as well as three front jack connectors mounted to its front faceplate. The faceplate is connected to the circuit board using screws. The faceplate has two locking mounts that help keep the circuit board in place once it is placed within a rack system. The board also has twenty-one integrated circuits, most of which are located in a single line parallel to the front faceplate, along with resistors and capacitors. The board is marked with a barcode and board id number, and also has four blocks of test points marked off on the surface of the board (TPA, TPB, TPC and TPX.)

","meta_title":"GE Mark VI IS200BPIHH1AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200BPIHH1AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200BPIHH1AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200BPIHH1AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2020-03-09 11:06:09","prod_pdf":[]},{"id":53554,"part_number":"IS200BPIIH1A","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BPIIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BPIIH1A is a Bridge Power Interface Board that is used within the GE Speedtronic Mark VI Series.

The IS200BPIIH1A is used within Innovation Series Drives. It interfaces with IGCT switching devices and provides a number of feedback signals, control signals, and accessibility points for other boards like the Expander Load Source Board (IS200GGXIG) in conjunction with the BICI board. The BPII board uses RS-422 connectors to communicate gate commands and status signals. It also relays up to 24 gate status feedback signals and gate firing commands between GGXI boards.

The IS200BPIIH1A is designed with two 128-pin backplane connectors that are labeled P1 and P2. The board also has two 68-pin connectors mounted into its front faceplate. These are labeled JGATE1 and JGATE2, and are typically used to interface with GGXI boards. The front faceplate also has two clips to hold the board in place after it is inserted into a rack system and is marked with the GE logo, the board’s identification number, and a warning to “install in slot 6 only.” Boards that are installed improperly may be damaged or may damage the system.

The IS200BPIIH1A also has four TP test pods located on its surface. These are located in two parallel lines. These test pods are used during board development and are not used once the board has been installed.

For more detailed information about the workings of or installation procedures for the IS200BPIIH1A board, please refer to the original datasheet or manual provided with your OEM equipment. If documentation is no longer available, we may be able to provide replacements with your order.

","meta_title":"The GE Mark VI IS200BPIIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BPIIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BPIIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BPIIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 16:16:11","updated_at":"2020-03-09 12:51:09","prod_pdf":[]},{"id":53555,"part_number":"IS200BPIIH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200BPIIH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200BPIIH1AAA, from the GE Speedtronic Mark VI series, is a Bridge Power Interface circuit board designed for use in Innovation Series drives.

The IS200BPIIH1AAA is used by the GGXI board to communicate gate command and status signals via RS-422 signals. The RS-422 drivers and receivers use point-to-point signaling that will alarm a bad gate signal if the cable is disconnected. The IS200BPIIH1AAA uses a serial prom ID chip and pull-up resistors. The resulting pull-up signal indicates that all cables are properly connected along the signal path.

The IS200BPIIH1AAA has four connectors on its surface: two mounted in the front faceplate and two on its back edge. The rear connectors are 128-pin backplane connectors. Pin signal maps are available in GEI-100298. The two front connectors are designed to interface with the GGXI board. Each connector, labeled JGATE1 and JGATE2, has 68 pins. The front faceplate has no other mounted components but is marked with the GE logo, the board number, and with the proper location of the board (slot 6.) Improper seating of the board can damage the component. Do not insert it in the wrong slot. The board has no fuses, user test points, LED indicators, or adjustable hardware.

For more information about using or installing the IS200BPIIH1AAA, please refer to user guides, datasheets, or manuals originally supplied by General Electric with your OEM equipment. If these are no longer available, AX Control may be able to provide replacements with your order. Most orders for in-stock merchandise placed before 3 pm are shipped on the same day.

","meta_title":"The GE Mark VI IS200BPIIH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200BPIIH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200BPIIH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200BPIIH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 16:17:06","updated_at":"2020-03-09 13:10:18","prod_pdf":[]},{"id":14497,"part_number":"IS200BPIRG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BRIDGE INTERFACE CARD","short_desc":"The IS200BPIRG1 is a GE printed circuit board","content":"

The IS200BPIRG1 is a PCB component for the Mark VI Speedtronic gas/steam management system from GE. The MKVI is designed on thirty years of research and development from GE and can be used in a variety of applications.

The IS200BPIRG1 functions as a Digital Interface Board within the MKVI system. This board is used in Innovation Medium Voltage/GP Type H drives. The IS200BPIRG1 provides a 15V to 5V bus interface (digital) between the BICR Bridge Interface Board and the FOHB Fiber-Optic Hub Board. Phase reference analog signals and bridge cell temperatures also pass through this board.

The IS200BPIRG1 includes two board connectors. The first is P1, located along the back edge of the board, which is a backplane connector. It is important to note the backplane connector on this board may need a custom extender board to access individual pin signals. The other connector is a 50-pin ribbon connector marked PLO. This connects the FOHB to the BPIR board.

The IS200BPIRG1 includes a 1024-bit memory chip. This includes revision information and board identification information. It is accessed through a data line on the P1 connector. The board also has four TP test points. These are labeled REF A, REF B, REF C, and ACOM. The board has a single relay, several resistors, a transistor, and six integrated circuits.

The IS200BPIRG1 should be treated as a static-sensitive board. AX Control will ship the board protected by an antistatic bag. Technicians should use a grounding strap when unpacking, installing, or handling this board.

","meta_title":"GENERAL ELECTRIC BRIDGE INTERFACE CARD","meta_description":"GENERAL ELECTRIC BRIDGE INTERFACE CARD","keywords":"GENERAL ELECTRIC BRIDGE INTERFACE CARD","series_page_description":"GENERAL ELECTRIC BRIDGE INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 11:27:27","prod_pdf":[]},{"id":14498,"part_number":"IS200BPIRG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BRIDGE INTERFACE MARK VI BOARD GE","short_desc":"The IS200BPIRG1A is a GE printed circuit board","content":"

The IS200BPIRG1A is a circuit board component for the Mark VI series. The Mark VI is the fifth of the Speedtronic series developed and released by GE. It includes a PC-based operator interface with proprietary software loaded. The MKVI uses CIMPLICITY graphics and the GE Control System Toolbox for maintenance.

As a Digital Interface Board, the IS200BPIRG1A is used within Innovation Medium Voltage--GP, Type H drives. This board provides a digital bus interface of 15V to 5V between the Bridge Interface card (BICR) and the Fiber Optic Hub card (FOHB.)

The IS200BPIRG1A is built with two board connectors. This includes a backplane connector, marked P1, that is located along the back edge of the board. This connector plugs the board into the drive system. It is worth noting the P1 connector on this board may need a custom extender board in order to access individual pin signals. The second connector is marked PLO and is a 50-pin ribbon connector. This ribbon connector links the Digital Interface card with the Fiber Optic Hub card.

The IS200BPIRG1A has very few components. These include four TP test points that are marked REFA, REFB, REFC, and ACOM. The board also has a transistor, one relay, several resistors and capacitors, and six integrated circuits. This includes a 1024-bit memory chip that holds board id and revision information.

AX Control will treat the IS200BPIRG1A as a static sensitive board. It will be shipped protected by an antistatic bag or wrap. It is recommended technicians use a grounding strap when handling the board.

","meta_title":"BRIDGE INTERFACE MARK VI BOARD GE","meta_description":"BRIDGE INTERFACE MARK VI BOARD GE","keywords":"BRIDGE INTERFACE MARK VI BOARD GE","series_page_description":"BRIDGE INTERFACE MARK VI BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 11:48:46","prod_pdf":[]},{"id":53394,"part_number":"IS200BPIRG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200BPIRG1AAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200BPIRG1AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200BPIRG1AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200BPIRG1AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200BPIRG1AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":14499,"part_number":"IS200BPPBH2","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI CIRCUIT BOARD","short_desc":"The IS200BPPBH2 is a GE Mark VI printed circuit board","content":"

The IS200BPPBH2 is a printed circuit board component created by GE for the Mark VI series. The Mark VI is part of the Speedtronic series that has been used for the management of heavy duty gas and steam turbines since the 1960s. The MKVI is an ideal platform for integrating power island and balance of power controls. The MKVI comes loaded with proprietary software (CIMPLICITY/Control System Toolbox,) which has been designed to work specifically with the MKVI hardware.

The IS200BPPBH2 is a very small circuit board. It is designed to be an auxiliary board added to another board. This board attaches to this primary board using screw mounts and standoffs. The screw mounts are inserted into four brass plated factory-drilled holes located that have been made in each corner of the board.

The IS200BPPBH2 has very few components. The components located on the board include two light emitting diodes. These are placed side-by-side on one corner of the board. The board also has two female phone jacks and two female vertical connectors. The board has several integrated circuits and also has several capacitors, transistors, and at least one inductor. Components on the board have been marked.

It is worth noting the IS200BPPBH2 board is shaped on three sides with cutouts. These may be designed to accommodate for components on the primary board.

Once you place your order, our warehouse team will package your boards with the utmost care. We use anti-static sleeves to protect delicate electrical components during transit. Your sales representative will help you choose your best shipping options.

","meta_title":"GE MARK VI CIRCUIT BOARD","meta_description":"GE MARK VI CIRCUIT BOARD","keywords":"GE MARK VI CIRCUIT BOARD","series_page_description":"GE MARK VI CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 11:33:44","prod_pdf":[]},{"id":14500,"part_number":"IS200BPPBH2B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MK 6 CIRCUIT BOARD GENERAL ELECTRIC","short_desc":"The IS200BPPBH2B is a GE Mark VI circuit board","content":"

The IS200BPPBH2B is a small printed circuit board designed as a component for the Mark VI, which is the fifth iteration of the GE’s Speedtronic series. The Speedtronic series has been used for steam or gas turbine management--with ever-increasing reliability--since the 1960s. With a Windows-based PC operator interface that comes preloaded with proprietary software like CIMPLICITY graphics and the Control System Toolbox, the Mark VI offers complete monitoring, control, and protection with optimal turbine performance.

The IS200BPPBH2B is designed as an auxiliary board to be added to a larger circuit board. This is a small board with few components. The board attaches to its motherboard using four standoffs and screw mounts that are inserted into brass-plated factory-drilled holes placed in each corner. It should be noted three of the IS200BPPBH2B board edges are shaped, possibly to allow room for components on the motherboard.

The IS200BPPBH2B has two LED (light emitting diodes) located along a board edge. The board has two vertical connectors of different sizes and two phone jacks. It also includes an inductor coil, several capacitors, and integrated circuits, and several transistors. One of the chips on the surface of the board is an AMD memory chip. This is located near the center of the board. Components have been marked with reference designators.

Installation procedures may be found in publications from General Electric referencing part number IS200BPPBH. This includes manuals and data sheets. Please follow all safety recommendations. As the original equipment manufacturer, GE provided all technical support for the IS200BPPBH2B.

","meta_title":"MK 6 CIRCUIT BOARD GENERAL ELECTRIC","meta_description":"MK 6 CIRCUIT BOARD GENERAL ELECTRIC","keywords":"MK 6 CIRCUIT BOARD GENERAL ELECTRIC","series_page_description":"MK 6 CIRCUIT BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-07 16:12:29","prod_pdf":[]},{"id":14501,"part_number":"IS200BPPH2","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI CARD","short_desc":"The IS200BPPH2 is a GE Mark VI printed circuit board","content":"

The IS200BPPH2 is a PCB component designed for the Mark VI iteration of the Speedtronic series for gas and steam turbine management. General Electric has released six different major versions of the Speedtronic system, starting with the MKI in 1969. The Mark VI includes proprietary software loaded onto a Windows-based PC Operator Interface, such as CIMPLICITY graphics and the GE Control System Toolbox. The MKVI offers a complete system designed for the control, protection, and monitoring of the turbine system and its auxiliaries.

The IS200BPPH2 is designed to be a daughterboard for a larger circuit board. This auxiliary board is small and hold very few components. The IS200BPPH2 attaches to the motherboard using four screws inserted through factory drilled holes into four standoffs. These standoffs are located under each corner of the board. It is worth noting the cutouts and shaping that has been utilized on three of the IS200BPPH2’s board edges. This may be to allow for tall components located on the primary board.

The IS200BPPH2 is built with two phone jacks located on one edge. It has two additional female connectors located on its surface. The board has several integrated circuits, including an AMD memory chip located toward the center of the board. The surface also houses several capacitors, an inductor, and transistors. Reference designators have been used to mark components.

AX Control can ship most in-stock products as quickly as ‘same day’ if ordered before 4 pm EST. We can ship anywhere in the world not currently affected by US embargo.

","meta_title":"GE MARK VI CARD","meta_description":"GE MARK VI CARD","keywords":"GE MARK VI CARD","series_page_description":"GE MARK VI CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 13:42:28","prod_pdf":[]},{"id":14502,"part_number":"IS200BPPH2B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MK6 GENERAL ELECTRIC BOARD","short_desc":"The IS200BPPH2B is a GE Mark VI printed circuit board","content":"

The IS200BPPH2B small printed circuit board component designed as part of the Mark VI series. The MKVI is part of the Speedtronic series, which has been managing steam/gas turbines since the release of the Mark I in 1969. GE spent decades improving the Speedtronic series, using the best technology available for every new system release. The MKVI has a Windows-based PC operator interface that uses proprietary software specifically designed for turbine management, like the Control System Toolbox and GE’s CIMPLICITY graphics.

The IS200BPPH2B has been designed to act as a daughter board for a larger circuit board. As an auxiliary board, it has been designed to attach to the surface of the motherboard via four screws inserted into four brass-ringed factory-drilled holes located in each corner of the board into standoffs. The edges of the IS200BPPH2B have cutouts designed into three of its four sides.

The IS200BPPH2B is built with two phone jacks located side-by-side along one edge of the board. On the opposite edge, the board has two LED diodes placed to face outward. The board has several integrated circuits, an inductor, two female connectors, transistors, and capacitors. Reference designators have been used to mark most components.

The IS200BPPH2B will be carefully packed for shipment from our facility to yours, including the use of anti-static material to protect the board from damage during transit. Please follow all installation procedures as recommended by the manufacturer. These can be found in publications like manuals and data sheets referencing the part number. All technical support for the IS200BPPH2B was provided by GE.

","meta_title":"MK6 GENERAL ELECTRIC BOARD","meta_description":"MK6 GENERAL ELECTRIC BOARD","keywords":"MK6 GENERAL ELECTRIC BOARD","series_page_description":"MK6 GENERAL ELECTRIC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 14:12:41","prod_pdf":[]},{"id":14877,"part_number":"IS200BPVAG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BACKPLANE BOARD MARK VI","short_desc":"The IS200BPVAG1 is a GE Mark VI backplane","content":"

The IS200BPVAG1 is a PCB component made for the Mark VI series from GE. The Mark VI is part of the Speedtronic line of gas and steam turbine management systems. Before the Mark VI was released in the mid-1990s, GE had spent over thirty years developing ever more reliable turbine management systems under the Speedtronic name. The Mark VI includes a Windows-based PC operator interface that is preloaded with proprietary software designed for turbine management. It can be designed in redundant or Simplex form, with a varying number of modules depending on the complexity of the turbine system.

The IS200BPVAG1 functions as a backplane card within the Mark VI system. The IS200BPVAG1 is designed to be placed into a rack system that bisects the card. The front of the card remains outside the rack system and the back half the card is within the taller part portion of the rack. The back half of the board is populated with 21 board connectors to accept a variety of cards. Cards inserted into these connectors fit into and are supported by the surrounding rack system. The front of the board includes 41 I/Os to support the transfer of information to and from the boards plugged into the backplane. It is important to note the rack system, including fan and cooling assembly, is separate from the IS200BPVAG1.

Our team will use the utmost care in packing the IS200BPVAG1 for shipment to your facility, including the use of an anti-static material to protect from static damage during transit. Please refer to manufacturer publications (manuals, data sheets) for installation guidelines.

","meta_title":"GE BACKPLANE BOARD MARK VI","meta_description":"GE BACKPLANE BOARD MARK VI","keywords":"GE BACKPLANE BOARD MARK VI","series_page_description":"GE BACKPLANE BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 16:03:54","prod_pdf":[]},{"id":14878,"part_number":"IS200BPVAG1B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK6 GENERAL ELECTRIC BACKPLANE CARD","short_desc":"The IS200BPVAG1B is a GE Mark VI backplane board","content":"

The IS200BPVAG1B is a PCB (printed circuit board) component created for the Speedtronic Mark VI series by General Electric. The MKVI is built with triple redundant backups on all critical controls and protection parameters, the third of the Speedtronic systems to offer triple redundant controls. Many modules in the MKVI are available in either Simplex or triple redundant form, depending on the size and complexity of the turbine system.

The IS200BPVAG1B is designed as a backplane board that is placed into the base of a rack system. The rack system bisects the card, with the front half of the card still accessible on the outside of the rack. The back half of the card is surrounded by the rack system in such a way that boards inserted into the backplane are supported by the sides of the rack. It is important to note the rack is separate from the IS200BPVAG1B board.

The IS200BPVAG1B is populated with twenty-one board connectors. These are designed to accept different sorts of cards. The front half of the board has two lines of Inputs/Outputs. One line has twenty-one and the other has twenty. These I/Os support the transfer to and from the boards plugged into the backplane.

AX Control offers a number of shipping options. We ship worldwide to all locations not currently affected by US embargo. Most in-stock products will ship same day. Please let your sales representative know if you have special shipping requirements during the order process, so we can best meet your needs.

","meta_title":"MARK6 GENERAL ELECTRIC BACKPLANE CARD","meta_description":"MARK6 GENERAL ELECTRIC BACKPLANE CARD","keywords":"MARK6 GENERAL ELECTRIC BACKPLANE CARD","series_page_description":"MARK6 GENERAL ELECTRIC BACKPLANE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 16:32:13","prod_pdf":[]},{"id":14503,"part_number":"IS200BPVCG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BACKPLANE ADVANCED SYSTEM MANAGEMENT INTERFACE","short_desc":"The IS200BPVCG1 is a GE Mark VI printed circuit board","content":"

The IS200BPVCG1 is a PCB component (printed circuit board) made for the Mark VI system. The Mark VI is part of General Electric’s Speedtronic family of gas and steam turbine management systems. The MKVI is considered a complete protection, control, and monitoring solution for heavy-duty turbine systems.

The IS200BPVCG1 is a backplane board designed to fit into the base of a rack system. This board is bisected by the design of the rack, which places the back half of the board inside a deeper portion of the rack system. This half of the board is populated with twenty-one backplane connectors. In this way, when boards are added to these connectors, they will be supported by the surrounding walls of the rack system. The front half of the board remains exposed and is placed upon a shorter section of the rack system. The rack itself is designed with a top hat flange on the left and right edge with screw mounts cut into each flange. This allows for secure installation of the rack into place. It is important to note the rack is a separate component.

The front half of the IS200BPVCG1 is populated with thirty-nine male vertical pin ribbon connectors. These are designed for the Input/Output of data from the boards plugged into the backplanes located inside the rack. The backplanes and the connectors are labeled. The board is also populated with fourteen stab-on connectors and six network arrays. The bottom of the board has over thirty components marked L1 through L30.

","meta_title":"BACKPLANE ADVANCED SYSTEM MANAGEMENT INTERFACE","meta_description":"BACKPLANE ADVANCED SYSTEM MANAGEMENT INTERFACE","keywords":"BACKPLANE ADVANCED SYSTEM MANAGEMENT INTERFACE","series_page_description":"BACKPLANE ADVANCED SYSTEM MANAGEMENT INTERFACE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 09:45:37","prod_pdf":[]},{"id":14504,"part_number":"IS200BPVCG1B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE BACKPLANE ASM BOARD","short_desc":"The IS200BPVCG1B is a GE Mark VI printed circuit board","content":"

The IS200BPVCG1B is a component made by General Electric for their Mark VI series. One of the later systems released under the Speedtronic umbrella, the Mark VI is considered a complete solution for the protection, monitoring, and control of gas and steam turbines. It is also an excellent platform for integrating balance-of-plant controls. GE worked to design both the hardware for the Mark VI and the software platforms running in the Windows-based PC HMI/Operator Interface. This integrated design allows for optimum turbine performance. The HMI is loaded with software like CIMPLICITY graphics, which allows for true client-server visualization and control.

The IS200BPVCG1B functions as a backplane board. It is designed to fit into a rack system that will accept and support multiple other boards. The back half of the IS200BPVCG1B, which is populated with 21 backplane connectors, fits into the deeper part of the rack system. The front portion of the board, which is populated with I/O connectors, is left more exposed to allow for the connection of ribbon cables. There are 39 I/O connectors on the front half of the board. These allow for the transfer of data to and from the boards connected to the backplane connectors. The board also includes six resistor network arrays, fourteen stab-on connectors, and thirty components labeled L1 through L30. These are located on the bottom side of the board.

Our team will pack the IS200BPVCG1B carefully for shipment to your facility. This includes the use of anti-static sleeves or bags to protect the board from static discharge during shipment.

","meta_title":"GE BACKPLANE ASM BOARD","meta_description":"GE BACKPLANE ASM BOARD","keywords":"GE BACKPLANE ASM BOARD","series_page_description":"GE BACKPLANE ASM BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 10:08:07","prod_pdf":[]},{"id":14505,"part_number":"IS200BPVCG1BR1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BACKPLANE ASM INTERFACE GE BOARD","short_desc":"The IS200BPVCG1BR1 is a GE Mark VI printed circuit board","content":"

The IS200BPVCG1BR1 is a PCB component used in the Mark VI series from GE. The Mark VI series is one of the later Speedtronic systems. GE has spent over three decades researching and developing the Speedtronic system to create a reliable, scalable, complete solution to the management of heavy-duty steam and gas turbine systems. The Mark VI uses more recent technology and integrated proprietary software to create an optimal turbine management system. This includes a PC-based HMI (operator interface) that runs software like General Electric’s CIMPLICITY graphics.

The IS200BPVCG1BR1 is a backplane board that has been designed to fit into a rack system that accepts and supports multiple boards. The rear half of this board is populated with twenty-one female backplane connectors. When placed in the rack system, this part of the board will be surrounded by tall walls that will support and lock connecting boards into place. The other part of the board, which holds Input/Output connectors, is designed to be left exposed outside the rack system. This allows the operator to easily connect ribbon connectors and their cabling to the board. There are thirty-nine I/O connectors, which allow data transfer from and to the boards attached to the backplanes. The IS200BPVCG1BR1 also includes fourteen stab-on connectors and six resistor network arrays. There are an additional thirty components on the bottom side of the board. These are labeled L1 through L30. The board is marked with the manufacturer logo and with the board number.

Your order will be carefully packed by our warehouse team for shipment to your location. This will include the use of materials to protect the board from static discharge, such as an anti-static bag or sleeve.

","meta_title":"BACKPLANE ASM INTERFACE GE BOARD","meta_description":"BACKPLANE ASM INTERFACE GE BOARD","keywords":"BACKPLANE ASM INTERFACE GE BOARD","series_page_description":"BACKPLANE ASM INTERFACE GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 10:36:33","prod_pdf":[]},{"id":14506,"part_number":"IS200CABPG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"ASM CONTROL IGCT BACKPLANE GE INTERFACE","short_desc":"GE Mark VI Board IS200CABPG1","content":"

The IS200CABPG1 is what is known as a control assembly backplane board. This is a type of printed circuit board or PCB which was created for the Speedtronic Mark VI series by General Electric or GE. The Mark VI is one of several series in the Mark line by GE.

The IS200CABPG1 is a multi-layer printed wiring board which provides for the connections of the printed wiring boards which are inserted into it. The IS200CABPG1 interfaces with external signals. Boards like IS200BAIA, IS215GBIA, IS200DSPX, IS200RAPA and others may be inserted into the CABP board. The IS200CABPG1 provides connectors for various external interfaces like user control inputs and outputs, front panel meters, diagnostic and configuration tools, front panel keypads, ports, and power supply inputs. The IS200CABPG1 contains a variety of connectors in different sizes. Nine (9) long white connector ports are featured on the IS200CABPG1. Five (5) are positioned on the left side and the other four (4) are positioned on the right. At the top edge of the IS200CABPG1, there are four (4) connector ports. The two on the top left are green in color while the two on the top right are brownish red. On the right end of the IS200CABPG1, a small part is attached which features two (2) more connector ports. One (1) of these ports is green and the other is made of silver metal. A long line of jumper pins is also featured on this part of the PCB. These pins are grouped together in two groups. A group of six (6) pins is on the left side while a group of eight (8) is on the right.

","meta_title":"ASM CONTROL IGCT BACKPLANE GE INTERFACE","meta_description":"ASM CONTROL IGCT BACKPLANE GE INTERFACE","keywords":"ASM CONTROL IGCT BACKPLANE GE INTERFACE","series_page_description":"ASM CONTROL IGCT BACKPLANE GE INTERFACE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 10:52:49","prod_pdf":[]},{"id":53464,"part_number":"IS200CABPG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200CABPG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","short_desc":"GE Innovation Series Control Assembly Backplane (CABP)","content":"

The IS200CABPG1A is a Control Assembly Backplane PCB for a GE Innovation Series drive.

The IS200CABPG1A is also called a CABP board and serves as a replacement for the backplane of an Innovation Series card rack. This card typically is used as an interfacing unit. It features card slots that other boards can be plugged into. These boards can then interact and interface with external signals. Some of these external signals include those coming from diagnostic tools, the user interface keypad, panel meters, ISBus ports, or inputs coming from the power supply. The CABP is normally installed on an Innovation Series card rack assembly. The rack, which is sold separately, has installation points for the other PCBs being plugged into the CABP.

The IS200CABPG1A’s non-board connections are designed so they cannot accidentally be plugged into the wrong connector. The board connections on the CABP are designed similarly so that each card slot is individually keyed for specific boards. Knowing where each board goes on this PCB is vital because attempting to force a card into the wrong slot could end up damaging both the board and the card slot. There are nine connections that equal to five slots on the board. Slot 1 is assigned to a BAIA board. Slot 2 is assigned to a DSPX PCB. Slot 3 is assigned to either an ACL_ board or GBIA/PBIA modules. Slot 4 is assigned to a BIC_ card. Slot 5 is assigned to either a BPI_ or FOSA card. There are two stab-on connections labeled E2 and E1 that go to GND. The E4 and E3 stab-on connections are for CCOM. The J1-12 connections are for external interfaces while the J13-J21 connections are the card slots.

","meta_title":"The GE Mark VI IS200CABPG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","meta_description":"The GE Mark VI IS200CABPG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","keywords":"["The GE Mark VI IS200CABPG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s Speedtronic series."]","series_page_description":"The GE Mark VI IS200CABPG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-20 08:19:48","updated_at":"2019-12-30 08:23:25","prod_pdf":[]},{"id":53440,"part_number":"IS200CABPG1ACA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200CABPG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"The IS200CABPG1ACA is a GE Control Assembly Backplane for an Innovation Series Drive.","content":"

The IS200CABPG1ACA is a GE Control Assembly Backplane for an Innovation Series Drive.

The IS200CABPG1ACA is also referred to as a CABP board. This board functions as a way for the boards that are plugged into it to interface and interact with external signals. Connections to other external interfaces are provided with this board. Some of these connections include power supply inputs, ISBus ports, diagnostic tools, front panel meters, and a front panel keypad. This board is typically installed onto the Innovation Series board rack. The rack has the ability to give installation points for the boards being plugged into the IS200CABPG1ACA.

The IS200CABPG1ACA is designed so that all of the non-board connections cannot accidentally be plugged into the wrong jack. The board connections on the board tend to use different types of connections, are individually keyed, or have the same pin assignments for that they can be interchanged without actually causing any damage to the boards. There are only certain boards that can be plugged into the CABP board. A BAIA board is assigned to slot 1. The DSPX board is assigned to slot 2. Slot 3 is taken up by ACL_ board or GBIA/PBIA mods. Slot 4 is assigned to a BIC_ board. A BPI_ or FOSA board is assigned to slot 5. The E1 and E2 stab-on connectors on this board go to GND. The E3 and E4 stab-on connectors go to CCOM. The J1-J12 connectors on this board are the external interface connections. The J13-J21 connectors are the actual card slots.

","meta_title":"The GE Mark VI IS200CABPG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200CABPG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200CABPG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200CABPG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-10 12:22:05","updated_at":"2019-12-16 09:19:33","prod_pdf":[]},{"id":14507,"part_number":"IS200CABPG1B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MARK VI CONTROL ASM IGCT BACKPLANE BOARD","short_desc":"GE Mark VI Board IS200CABPG1B","content":"

The IS200CABPG1B is a device called a control assembly backplane board. This device is a PCB or printed circuit board that was made to be part of the Speedtronic Mark VI series which was made by GE or General Electric. The Mark VI is just one of many different series in General Electric’s Mark line.

The IS200CABPG1B is a multi-layer printed wiring board. When printed wiring boards are inserted into the IS200CABPG1B, this device enables their connections. The IS200CABPG1B is an interface between external signals. Wiring boards such as the IS200RAPA, IS200DSPX, IS215GBIA, and IS200BAIA or others can be connected into the CABP board. The IS200CABPG1B gives connectors to different external interfaces such as user control I/O (input and output), meters for front panels, configuration and diagnostic tools, keypads for front panels, ports, inputs for power supply, and ports. The IS200CABPG1B features a range of connectors in varying sizes. Nine (9) long connector ports which are white are positioned on the IS200CABPG1B. Five (5) of these connector ports have been placed on the left while and the last four (4) are located on the right end. Four (4) connector ports are near the top border of the IS200CABPG1B. Two of these ports which are green are positioned at the upper left and the remaining two which are reddish-brown are at the upper right. On the right end of the IS200CABPG1B, one small part is connected to the PCB which has two (2) extra connector ports. One (1) of the ports is silver and metal and the other one is green.

","meta_title":"GENERAL ELECTRIC MARK VI CONTROL ASM IGCT BACKPLANE BOARD","meta_description":"GENERAL ELECTRIC MARK VI CONTROL ASM IGCT BACKPLANE BOARD","keywords":null,"series_page_description":"GENERAL ELECTRIC MARK VI CONTROL ASM IGCT BACKPLANE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-12-10 16:41:41","prod_pdf":[]},{"id":53441,"part_number":"IS200CABPG1BAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":3,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200CABPG1BAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"GE IS200CABPG1BAA is a Control Assembly Backplane (CABP) for Innovation Series.","content":"

The IS200CABPG1BAA is a Control Assembly Backplane (CABP) made by General Electric for its Innovation Series.

The IS200CABPG1BAA is typically a replacement board for the backplane on an Innovation series rack assembly. The rack is not provided with this board and is sold separately. The rack provides additional installation points for the boards that are being installed. Other PCBs are plugged into the 5 slots on the IS200CABPG1BAA and are allowed to interact and interface with external signals. Connections to these external interfacing components are provided with this board. These connections include ISBus ports, power supply inputs, diagnostic tools, a front panel keypad, and front panel meters.

The IS200CABPG1BAA has plugs that are designed to not allow non-board connections to accidentally be plugged into the wrong jack. The PCBs being plugged into the backplane should be installed carefully because while they do use different connections that are individually keyed, it is easy to damage the board by sliding it into the wrong slot. Slot 1 on the backplane is assigned to the BAIA board. Slot 2 is assigned to the DSPX board. Slot 3 is designated for the ACL_ board to the GBIA/PBIA modules. Slot 4 is for the BIC_ board. Slot 5 is meant to be for a BPI_ or FOSA board. There are two stab-on connectors that are labeled E1 and E2 that go to GND. There are two other stab-on connectors labeled E3 and E4 that go to CCOM. There are 21 jumpers on this board. J1-J12 jumpers are external interfaces. J13-J21 are the actual card slots on the backplane.

Please refer to GEI-100268A for more information about this board.

","meta_title":"The GE Mark VI IS200CABPG1BAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200CABPG1BAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200CABPG1BAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200CABPG1BAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-10 12:23:08","updated_at":"2019-12-16 16:54:03","prod_pdf":[]},{"id":15023,"part_number":"IS200CHS022","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PRINTED CIRCUIT BOARD GENERAL ELECTRIC MKVI","short_desc":"","content":null,"meta_title":"PRINTED CIRCUIT BOARD GENERAL ELECTRIC MKVI","meta_description":"PRINTED CIRCUIT BOARD GENERAL ELECTRIC MKVI","keywords":"PRINTED CIRCUIT BOARD GENERAL ELECTRIC MKVI","series_page_description":"PRINTED CIRCUIT BOARD GENERAL ELECTRIC MKVI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14508,"part_number":"IS200CPFPG1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL POWER FLASH PR BOARD","short_desc":"GE Mark VI Board IS200CPFPG1","content":"

The IS200CPFPG1 is a device which is known as a control power flash protect board (CPFP). This is a type of printed circuit board or PCB manufactured for the Mark VI series by General Electric or GE. The Mark VI is one of several series which has been released in the Mark line made for the control and management of gas and steam turbine controls. The Mark series have been used to control turbine operations since the Mark I was first introduced in 1969.

The IS200CPFPG1 control power flash protect board is a forty-eight (48) volt AC protective power distributor and monitor. This device is used in the medium voltage Innovation Series AC drive. The IS200CPFPG1 is responsible for performing several different functions including protecting the forty-eight (48) volt AC power bus and distributing isolated control power to bridge the interface board. The IS200CPFPG1 also monitors that status of input line fuses and monitors any insulation failure of source power cables. The control power flash protect board is usually mounted onto an insulated panel which is inside the drive’s high power section. This board contains two (2) 3-pin input connector as well as seven (7) 3-pin output connectors which are used for control power distribution. The IS200CPFPG1 contains a high voltage transformer labeled as T8 which serves as a protective barrier between input and output. Each of the IS200CPFPG1’s seven (7) output power connectors include surge protectors. The IS200CPFPG1 contains two (2) circuits which monitor fuse faults. One of these circuits monitors line power fuse status and the other monitors line filter fuse status.

","meta_title":"GE CONTROL POWER FLASH PR BOARD","meta_description":"GE CONTROL POWER FLASH PR BOARD","keywords":"GE CONTROL POWER FLASH PR BOARD","series_page_description":"GE CONTROL POWER FLASH PR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 09:48:54","prod_pdf":[]},{"id":14509,"part_number":"IS200CPFPG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MARK VI CONTROL PWR FLASH PR BOARD","short_desc":"GE Mark VI Board IS200CPFPG1A","content":"

The IS200CPFPG1A is a device which is called a control power flash protect circuit board or CPFP. This is a type of printed circuit board or PCB developed as a part of the Mark VI series by General Electric or GE. The Mark VI and all of its predecessor series are part of the Mark line which was created for gas/steam turbine control. Mark systems have been relied on to control gas and steam turbine processes since the Mark I was created in 1969.

The IS200CPFPG1A control power flash protect (CPFP) board what is called a protective power distributor for the Innovation Series AC drive. The CPFP also monitors this medium voltage drive. The IS200CPFPG1A protects the 48-volt power bus and distributes the isolated control power to bridge interface boards. This device monitors input line fuse status and the insulation failure of source power cables. A CPFP is typically mounted on a panel which is isolated and located inside a drive’s high power section. The CPFP contains two 3-pin input connectors and seven 3-pin output connectors. These are used for the distribution of control power. Three (3) small fuses have been placed on the IS200CPFPG1A in the center and the left half. These fuses are identified by the labels FU1, FU2, and FU3. Two (2) of these contain a voltage of one-hundred twenty-five (125) volts and the last has a voltage of two-hundred fifty (250) volts. Eleven (11) jack connector ports are placed around the edges of the IS200CPFPG1A. Seven (7) of these are attached to the right border and the remaining four (4) are sitting on the left edge.

","meta_title":"GENERAL ELECTRIC MARK VI CONTROL PWR FLASH PR BOARD","meta_description":"GENERAL ELECTRIC MARK VI CONTROL PWR FLASH PR BOARD","keywords":null,"series_page_description":"GENERAL ELECTRIC MARK VI CONTROL PWR FLASH PR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-27 11:07:52","prod_pdf":[]},{"id":53395,"part_number":"IS200CPFPG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200CPFPG1AAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200CPFPG1AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200CPFPG1AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200CPFPG1AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200CPFPG1AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":14510,"part_number":"IS200CPFXG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PHASE LEG FLASH PROTECTION CARD","short_desc":"GE Mark VI Board IS200CPFXG1","content":"

The IS200CPFXG1 is a device which is called a phase leg flash protection board or CPFX. This is a type of printed circuit board or PCB which was made for the Mark VI series by General Electric or GE. This device is used in Innovation Series drives to isolate the power supply for the IS200PICH Phase Interface and Control Board or PICH.

The phase leg flash protection board isolates the power for one phase leg form the other phase legs. The CPFX features one (1) isolation transformer labeled T1 and two (2) connectors labeled as J1 and J2. There is one (1) phase leg flash protection board per phase leg and one (1) IS200CPFP control power flash protection board per bridge. There are separate outputs which connect the CPFP board to every CPFX board. The IS200CPFXG1 doesn’t contain any fuses, user adjustable hardware, light-emitting diodes, or testpoints. This board features two (2) plug connectors. The IS200CPFXG1 is a rectangular printed circuit board. A large transformer has been placed directly in the center of the IS200CPFXG1. This black transformer is labeled as T1 and is square shaped. A small rectangular component is located directly above the transformer. This component is labeled as DS1. The connector known as J2 is positioned near the top edge of the IS200CPFXG1 and the connector labeled as J1 is situated near the bottom of the IS200CPFXG1. Attached to the left edge of the IS200CPFXG1 is a small barcode. The device’s full part number may be seen at the top of the IS200CPFXG1.

","meta_title":"GE PHASE LEG FLASH PROTECTION CARD","meta_description":"GE PHASE LEG FLASH PROTECTION CARD","keywords":"GE PHASE LEG FLASH PROTECTION CARD","series_page_description":"GE PHASE LEG FLASH PROTECTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 14:10:35","prod_pdf":[]},{"id":14511,"part_number":"IS200CPFXG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PHASE LEG FLASH PROTECTION BOARD GENERAL ELECTRIC","short_desc":"GE Mark VI Board IS200CPFXG1A","content":"

The IS200CPFXG1A is what is known as a phase leg flash protection (CPFX) board. This board is a form of PCB or printed circuit board which was developed as a part of the Mark VI series by GE (General Electric). The Mark VI is one of a series of systems included in the Mark line. This line is responsible for the management of steam and gas turbine controls. These series have been used in industrial turbines all around the world for several decades since the introduction of the Mark I in 1969.

The IS200CPFXG1A phase leg flash protection board is used to isolate the supply of power for the IS200PICH phase interface and control board or PICH in Innovation Series drives. The IS200CPFXG1A board isolates one (1) phase leg’s power from the power of the rest of the phase legs. This circuit board contains an isolation transformer identified as T1, and two (2) connectors identified as J2 and J1. One (1) CPFX board is included for every phase leg and one (1) IS200CPFP control power flash protection card (CPFP) is included per bridge. Separate outputs connect the CPFP board to each CPFX board. The CPFX contains no fuses, LED indicators, testpoints, or user-adjusted hardware. The IS200CPFXG1A features two (2) plug connectors which are labeled as J2 and J1. The transformer which is large and shaped like a square is centered on the surface of the IS200CPFXG1A. A small electronic component has been placed on the IS200CPFXG1A right next to the transformer which is marked as DS1. The full part number of this device, IS200CPFXG1A, has been printed at the top border of the PCB.

","meta_title":"PHASE LEG FLASH PROTECTION BOARD GENERAL ELECTRIC","meta_description":"PHASE LEG FLASH PROTECTION BOARD GENERAL ELECTRIC","keywords":"PHASE LEG FLASH PROTECTION BOARD GENERAL ELECTRIC","series_page_description":"PHASE LEG FLASH PROTECTION BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 15:09:28","prod_pdf":[]},{"id":16165,"part_number":"IS200CSLAH4","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE HSSL EXPANDER CARD","short_desc":null,"content":null,"meta_title":"MARK VI GE HSSL EXPANDER CARD","meta_description":"MARK VI GE HSSL EXPANDER CARD","keywords":"MARK VI, GE, HSSL EXPANDER CARD","series_page_description":"MARK VI GE HSSL EXPANDER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-16 08:28:01","prod_pdf":[]},{"id":16164,"part_number":"IS200CSLAH4A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE HSSL EXPANDER CARD","short_desc":null,"content":null,"meta_title":"MARK VI GE HSSL EXPANDER CARD","meta_description":"MARK VI GE HSSL EXPANDER CARD","keywords":"MARK VI, GE, HSSL EXPANDER CARD","series_page_description":"MARK VI GE HSSL EXPANDER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-16 08:28:09","prod_pdf":[]},{"id":16163,"part_number":"IS200CSLAH4AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE HSSL EXPANDER CARD","short_desc":null,"content":null,"meta_title":"MARK VI GE HSSL EXPANDER CARD","meta_description":"MARK VI GE HSSL EXPANDER CARD","keywords":null,"series_page_description":"MARK VI GE HSSL EXPANDER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:06:32","prod_pdf":[]},{"id":16145,"part_number":"IS200CTBCG1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE I/O TERMINAL BOARD","short_desc":null,"content":"

The IS200CTBCG1 board, the Mark VI GE I/O terminal board modules, are used within systems for turbine and plant controls. Its I/O modules possess a wide range of types and the flexibility to distribute them individually or in groupings. The IS200CTBCG1 is a rectangular shaped terminal board, outfitted with a large plug and two strips in the middle of the board.

The Mark VI GE I/O series drives are mounted with an I/O pack to run algorithms, digitize the sensor signal, and communicate using a separate controller which has within it the main processor. This I/O pack has a local processor board which can run a real-time operating system and a data acquisition board that is unique to the specific I/O application. The local processor runs algorithms at faster speeds than the overall control system, such as the regulation of servo valves performed within a servo module.

Along with the features of the I/O pack, the Mark VI GE I/O series includes 100 MB full-duplex ports, Dual 100 MB Ethernet ports, online repair per I/O pack, automatic reconfiguration, accuracy specified over full operating temperature, internal temperature sensor, LEDs (which indicate power status and attention, Ethernet link-connected and communication-active, and application-specific), 28 V dc power, and an internal solid-state circuit breaker and soft start.

The Mark VI GE I/O series features a controller with a compact and flexible design for processing and network communications. This controller’s features include the following: Flexible frame rate (10, 20, 40, 80, 160, or even 320 ms), speed of either 600 MHz or 1200 MHz, 5 Ethernet ports, 1 USB port, 1 COM port, flexible configuration processes (simplex, dual, triple), 18 to 32 V dc for power, status LEDs, cooling of up to 1200 MHz using redundant fans, IEC-61508 compliant safety features, and Level 1 Achilles™ certified security.

The IS200CTBCG1A board, the Mark VI GE I/O terminal board modules, are used within systems for turbine and plant controls. Its I/O modules possess a wide range of types and the flexibility to distribute them individually or in groupings. The IS200CTBCG1A is a rectangular shaped terminal board and has a large plug and two strips located in the middle of the board.

In addition to four programmable outputs available, the Mark VI GE I/O series drive provides three more application outputs on the terminal board. The outputs are not programmable, however. Instead, they are mapped to some commonly used signals within the drive itself. The outputs are solid-state relay drivers which can be used to drive 24 V dc, 10 mA relays

The Mark VI GE I/O series drives are mounted with an I/O pack to run algorithms, digitize the sensor signal, and communicate using a separate controller which it has within its main processing unit. This I/O pack has a data acquisition board that is unique to the specific I/O application and a local processor board which is able to run a real-time operating system. The local processor runs algorithms at faster speeds than the normal control system, such as the regulation of servo valves performed within a servo module.

The IS200CTBCG1AA board, the Mark VI GE I/O terminal board modules, are used within systems for turbine and plant controls. Its I/O modules possess a wide range of types and the flexibility to distribute them individually or in groupings. The IS200CTBCG1AA is a rectangular shaped terminal board, outfitted with a large plug and two strips in the middle of the board.

In addition to four user-friendly programmable outputs available, the Mark VI GE I/O series drive provides three more application outputs via the terminal board. The outputs are not programmable; however, they are mapped to some commonly used signals within the drive itself. The outputs are solid-state relay drivers that can be used to drive 24 V dc, 10 mA relays

","meta_title":"MARK VI GE I/O TERMINAL BOARD","meta_description":"MARK VI GE I/O TERMINAL BOARD","keywords":"MARK VI, GE, I/O TERMINAL BOARD","series_page_description":"MARK VI GE I/O TERMINAL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-12 15:26:08","prod_pdf":[]},{"id":53396,"part_number":"IS200CTBCG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200CTBCG1AAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200CTBCG1AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200CTBCG1AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200CTBCG1AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200CTBCG1AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":14512,"part_number":"IS200CVMBG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CAPACITOR VOLTAGE MONITOR","short_desc":"GE Mark VI Board IS200CVMBG1","content":"

The IS200CVMBG1 is what is known as a capacitor voltage monitoring board or CVMB. This device is a type of printed circuit board or PCB. The capacitor voltage monitoring board is a device which monitors the voltage across the DC link capacitors in Innovation Series drives.

CVMB boards provide secondary indication of voltage presence for any operations who open the bridge cabinet doors. There are three (3) neon lamps labeled DS1, DS2, and DS3 are placed on the CVMB board which blink if there is high voltage (greater than 50 volts DC) on the DC bus. The CVMB board contains an attenuator network which controls the neon lamps. These three (3) lamps are situated close to the top border of the IS200CVMBG1. These lamps can be seen clearly whenever the doors of the bridge cabinet are opened. The bulbs and bulb clips feature the part numbers 68A780494 and 68A944080P1 respectively. The IS200CVMBG1 board does not contain any fuses test points, adjustable hardware, or connectors. The board is mounted directly onto the terminals of the DC power capacitor. The CVMB board is mounted using four (4) holes, known as mounting points labeled as E1, E2, E3, and E4. This PCB does not require any input power. Six (6) capacitors are lined up along the top of the IS200CVMBG1 identified as C1 through C6. A total of twenty (20) resistors have been placed all over the IS200CVMBG1. These resistors are divided into four (4) groups of five (5) resistors each which are aligned vertically on the IS200CVMBG1.

","meta_title":"GE CAPACITOR VOLTAGE MONITOR","meta_description":"GE CAPACITOR VOLTAGE MONITOR","keywords":"GE CAPACITOR VOLTAGE MONITOR","series_page_description":"GE CAPACITOR VOLTAGE MONITOR","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 15:52:04","prod_pdf":[]},{"id":14513,"part_number":"IS200CVMBG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CAPACITOR VOLTAGE MONITOR MARK VI GE","short_desc":"GE Mark VI Board IS200CVMBG1A","content":"

The IS200CVMBG1A is a device which is called a capacitor voltage monitoring board or CVMB. This is a form of printed circuit board or PCB. The IS200CVMBG1A is a component which monitors voltage across DC link capacitors within Innovation Series drives.

The IS200CVMBG1A gives turbine operators a secondary indication of the presence of voltage when the bridge cabinet doors are opened. This CVMB circuit board features three (3) small lamps which are neon labeled as DS3, DS2, and DS1. These are situated in a horizontal line along of top edge of the IS200CVMBG1A. They can be clearly seen when the doors of the bridge cabinet are opened. These small lamps blink whenever the DC bus contains high voltage of more than fifty (50) volts DC. These neon lamps are controlled by an attenuator network. Both bulb clips and bulbs may be replaced using parts with the numbers 68A944080P1 and 68A7804P4. No test points, fuses, connectors or adjustable hardware are featured on the IS200CVMBG1A. This board can be mounted right onto the DC power capacitor’s terminals with four (4) through-plate mounting holes which are labeled as E1, E2, E3, and E4. E2 and E1 are positioned on the left half of the printed circuit card and the E3 and E4 have been located on the PCB’s right half. The IS200CVMBG1A does not require any input power and dissipates approximately three (3) to five (5) watts of power. The IS200CVMBG1A is a large rectangular printed circuit board which features electronic components such as capacitors and resistors.

","meta_title":"CAPACITOR VOLTAGE MONITOR MARK VI GE","meta_description":"CAPACITOR VOLTAGE MONITOR MARK VI GE","keywords":"CAPACITOR VOLTAGE MONITOR MARK VI GE","series_page_description":"CAPACITOR VOLTAGE MONITOR MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 16:32:13","prod_pdf":[]},{"id":14514,"part_number":"IS200DAMAG1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"INSULATOR-GATE BIPOLAR TRANSISTOR GE MARK VI","short_desc":"GE Mark VI Board IS200DAMAG1","content":"

The IS200DAMAG1 is what is called an insulator-gate bipolar transistor board. This is a type of printed circuit board or PCB. The IS200DAMAG1 was created for the Speedtronic Mark VI series by General Electric or GE.

The IS200DAMAG1 features two (2) main groups of components on either side of the board and a few components in the center of the PCB. One (1) collection of several various components is featured on the right side of the IS200DAMAG1. Two (2) of these components made of silver metal. These components are identified with the letter E. Four (4) round capacitors which are solid yellow in color can be found in this group. These are arranged in two (2) pairs. Sitting between these two pairs of yellow capacitors are two (2) banded resistors which are medium-sized. These resistors are light blue and they have bands that are black or dark blue and silver. Two (2) transistors are placed beneath these two (2) resistors. The transistors are rectangular and brown with orange metal pieces attached to the top of the devices. These transistors are labeled with the reference designator Q, as Q1 and Q2. Sitting next to these transistors are two (2) small LEDs or light-emitting diodes. One of these LEDs is yellow and the other is blue. These LEDs are labeled as UON and UFF. A few small resistors which have bands that are red, pink and black can be seen as well as a few small silver diodes. On the opposite side of the board, there is another corresponding group with the same components.

The IS200DAMAG1A is a printed circuit board or PCB made by General Electric (GE). This is what is known as an insulator-gate bipolar transistor. The IS200DAMAG1A is a part of the Mark VI or MKVI series by GE.

Two (2) groups of components are featured on the IS200DAMAG1A. On the left half of the PCB, there is a collection of components with a wide variety of parts. Four (4) capacitors which are solid yellow are featured in this group. The yellow capacitors are round. Two (2) are positioned on the left and the other two (2) are sitting on the right side. Two (2) medium-sized resistors are paired together and placed in the middle of the four (4) capacitors. The resistors are light blue in color and they have bands that are black, blue, grey, and red. Several small resistors are featured in this group. These resistors have bands that may be red, orange, yellow, blue, white, and green. Two (2) small capacitors are featured in this area. These are also solid yellow in color. Two (2) large metal components may be found at the bottom of the group. Another collection of components is positioned on the right half of the IS200DAMAG1A. Two (2) large metal components are situated at the top of this group. A series of four (4) round capacitors have been placed in the center of this group. Two (2) resistors which are light blue with bands that are blue, white, and red are placed in the middle of these capacitors. Several smaller resistors are featured in this group which are also covered in multi-colored bands.

","meta_title":"INSULATOR-GATE BIPOLAR TRANSISTOR GE MARK VI","meta_description":"INSULATOR-GATE BIPOLAR TRANSISTOR GE MARK VI","keywords":"INSULATOR-GATE BIPOLAR TRANSISTOR GE MARK VI","series_page_description":"INSULATOR-GATE BIPOLAR TRANSISTOR GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"IS200DAMAG1ACA","created_at":null,"updated_at":"2018-11-20 16:04:33","prod_pdf":[]},{"id":53397,"part_number":"IS200DAMAG1ACA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200DAMAG1ACA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200DAMAG1ACA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200DAMAG1ACA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200DAMAG1ACA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200DAMAG1ACA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":14515,"part_number":"IS200DAMAG1B","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IGBT AT INVERTER SNU GENERAL ELECTRIC MARK VI","short_desc":"GE Mark VI Board IS200DAMAG1B","content":"

The IS200DAMAG1B is a device known as an inverter card. This is a printed circuit board or PCB which is a component in the 193x series by General Electric or GE. The 193x series consists of many devices which are used to manage the operations of gas and steam turbines for industrial use.

The IS200DAMAG1B is a relatively small rectangular printed circuit board. A variety of small electronic components may be found concentrated mostly in two (2) groups on either side of the PCB. Each of these groups contain the same components. Two (2) tall silver metal components which are labeled with the letter E may be seen in each group. Also featured in each of the groups are two four (4) yellow capacitors. Two (2) resistors which are light blue with a series of multicolored bands have been placed in the center of these capacitors. The bands on these resistors may be blue, grey or silver. At the top of each collection of small components, there are two (2) small LEDs of light-emitting diodes. One (1) of these diodes is yellow in color and the other is blue. At least three (3) other small resistors have been placed on each side of the IS200DAMAG1B. These resistors contain bands that are black, red, or yellow. Two (2) small diodes which are silver are paired together on each side as well as two (2) very small solid yellow capacitors. Placed in the center of the IS200DAMAG1B are two (2) collections of metal jumper pins. Eight (8) pins can be found in a group at the bottom and another four (4) are placed near the top of the IS200DAMAG1B.

","meta_title":"IGBT AT INVERTER SNU GENERAL ELECTRIC MARK VI","meta_description":"IGBT AT INVERTER SNU GENERAL ELECTRIC MARK VI","keywords":null,"series_page_description":"IGBT AT INVERTER SNU GENERAL ELECTRIC MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-12-16 08:09:34","prod_pdf":[]},{"id":53398,"part_number":"IS200DAMAG1BCB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200DAMAG1BCB Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200DAMAG1BCB Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200DAMAG1BCB Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200DAMAG1BCB Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200DAMAG1BCB Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":14516,"part_number":"IS200DAMBG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GATE DRIVER BOARD","short_desc":"GE Mark VI Board IS200DAMBG1","content":"

The IS200DAMBG1 is a device called a gate driver card. This is a type of printed circuit board or PCB made for the Mark VI series of gas/steam turbine controls. The Mark VI is just one of several series in the Mark line by General Electric or GE. The Mark VI is the latest series in the Mark line and has been used for many years in industries across the world.

The IS200DAMBG1 is a small rectangular circuit board. Several electronic components are positioned on each side and a few have been placed in the PCB’s center. Four (4) silver metal components are placed on the surface of the IS200DAMBG1, two (2) on each side. A group of four (4) round yellow capacitors may be seen on either end of the IS200DAMBG1. The yellow capacitors are grouped together in a square arrangement. Two (2) resistors which are grey in color are situated in the middle of each square. A variety of small banded resistors have been placed in various locations around the IS200DAMBG1. On each side of the small PCB are two (2) small LEDs or light-emitting diodes. While one (1) of these light-emitting diodes is blue, the other is yellow. Two (2) small integrated circuits have been attached to the IS200DAMBG1 near the upper left corner. The center portion of the IS200DAMBG1 contains two (2) white components which are long and rectangular. The full part name of the device, IS200DAMBG1, may be seen printed on the surface of the Mark VI PCB.

","meta_title":"GENERAL ELECTRIC GATE DRIVER BOARD","meta_description":"GENERAL ELECTRIC GATE DRIVER BOARD","keywords":"GENERAL ELECTRIC GATE DRIVER BOARD","series_page_description":"GENERAL ELECTRIC GATE DRIVER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-10 17:45:40","prod_pdf":[]},{"id":14517,"part_number":"IS200DAMBG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE DRIVER CARD GE MARK VI","short_desc":"GE Mark VI Board IS200DAMBG1A","content":"

The IS200DAMBG1A was made as a component in the Speedtronic Mark VI series by General Electric or GE. The Mark VI is one of several series in GE’s Mark line. This device is a type of printed circuit board or PCB. The IS200DAMBG1A is what is called a gate driver card.

The IS200DAMBG1A is a rectangular circuit board which is small in size. This circuit card has a number of small components located on either side and a few situated in the center. Four large silver components which are made of metal are positioned on the IS200DAMBG1A. Two (2) of these are on the left half and the other two (2) are on the right. A collection of eight (8) capacitors which are solid yellow and round are situated on the IS200DAMBG1A. They are divided into two (2) groups of four (4) capacitors each. These groups are arranged in square formations. Each of these squares has two (2) grey resistors in the center. Many other resistors which are smaller in size but covered in bands that are red, black and yellow can be found on various places on the IS200DAMBG1A. Four light-emitting diodes or LEDs are featured on the IS200DAMBG1A. Two (2) of the LEDs are blue and two (2) of them are yellow. These LEDs are small in size. On each side of the IS200DAMBG1A, two (2) light-emitting diodes are paired together, one of each color. Near the top left corner of the IS200DAMBG1A, two (2) small integrated circuits are placed paired together. In the center of the IS200DAMBG1A, there are two (2) long white components.

","meta_title":"GATE DRIVER CARD GE MARK VI","meta_description":"GATE DRIVER CARD GE MARK VI","keywords":"GATE DRIVER CARD GE MARK VI","series_page_description":"GATE DRIVER CARD GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 15:48:01","prod_pdf":[]},{"id":53491,"part_number":"IS200DAMBG1ABB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The Mark VI IS200DAMBG1ABB is a printed circuit board created by GE. It belongs to the GE Mark VI IS200 Speedtronic Series.","short_desc":null,"content":"

The IS200DAMBG1ABB board was designed and shipped by General Electric. The IS200DAMBG1ABB board is a gate driver board and is part of the Innovation Series 200DAM_ Gate Drive Amplifier Interface Boards, which is a series that was designed to be inputted into the GE Mark VI SPEEDTRONIC series of products. As a board included in the Innovations Series 200DAM_ Gate Drive Amplifier Interface Boards, the IS200DAMBG1ABB board provides a convenient interface between a control rack interface and a power switching device, which are called the IGBTs.

The DAMA boards is a 620 frame board with a CM1000HA-28H Powerrex IGBT and three boards per drive, with only one board for each individual phase leg. Also, there is only one IGBT included for the device’s upper phase leg and only one IGBT included for the device’s lower phase leg. The DAM_ boards connect right to the IGBT collector terminals, gates, and terminals and directly with the IS200BPIA Bridge Personality Interface board, which is found within the control rack. Additionally, there are no testpoints, fuses, or configurable items anywhere on the board.

There are multiple IGBT Connection pins in the IS200DAMBG1ABB, each with their one name and description. Pin 1 is named GLIN, which is intended to be the lower gate signal. Pin 2 is named LCOM and is intended to be the lower common signal (emitter). Pins 3, 4, 8, and 9 are named NC and they are not connected. Pin 5 is named CL and is intended to be the lower collector signal. Pin 6 is named UCOM and is intended to be the upper common signal (emitter). Pin 7 is named GUIN and is intended to be the upper gate signal. Pin 12 is named CU and is intended to be the upper collector signal.

","meta_title":"The Mark VI IS200DAMBG1ABB is a printed circuit board created by GE. It belongs to the GE Mark VI IS200 Speedtronic Series.","meta_description":"The Mark VI IS200DAMBG1ABB is a printed circuit board created by GE. It belongs to the GE Mark VI IS200 Speedtronic Series.","keywords":"["The Mark VI IS200DAMBG1ABB is a printed circuit board created by GE. It belongs to the GE Mark VI IS200 Speedtronic Series."]","series_page_description":"The Mark VI IS200DAMBG1ABB is a printed circuit board created by GE. It belongs to the GE Mark VI IS200 Speedtronic Series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-02-27 11:37:17","updated_at":"2020-03-05 16:45:11","prod_pdf":[]},{"id":14518,"part_number":"IS200DAMCG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER 250A","short_desc":"GE Mark VI Board IS200DAMCG1","content":"

The IS200DAMCG1 is a device which is called an Innovation Series 200DAM Gate Drive Amplifier and Interface board. These boards provide an interface between the control rack and power switching devices (or IGBTs) in Innovation Series low voltage drives. The boards include LEDs or light-emitting diodes which indicate whether the IGBT is on or off. These gate drive boards come in six (6) different variations: DAMA, DAMB, DAMC, DAMD, and DAME. The variations are determined by their drive power rating.

The DAMC boards, along with the DAMA and DAMB boards, amplify current, providing the final stage of gate drive for one (1) phase leg of the drive’s power bridge. These boards receive a +15/-7.5 power supply input. The boards directly connect with the emitter terminals, collector terminals, and IGBT gate, as well as the IS200BPIA (BPIA) board of the control rack. The DAMC boards do not feature any test points, fuses, or items which can be configured. The IS200DAMCG1 features a variety of small electronic components. Two (2) rectangular components are placed in the center of the IS200DAMCG1. These are labeled as PPL and PL. The component labeled as PL is twice as long as PPL. Indicator lights which are labeled as DS1, DS3, DS2, and DS4 have been placed on the IS200DAMCG1. The DS4 and DS2 are on the left side while the DS1 and DS3 are sitting on the right. The DS1 and DS2 are yellow in color and the DS3 and DS4 are green. The full name of the IS200DAMCG1 has been printed on the lower edge of the printed circuit board.

","meta_title":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER 250A","meta_description":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER 250A","keywords":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER 250A","series_page_description":"GENERAL ELECTRIC GATE DRIVER AMPLIFIER 250A","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-12 09:02:00","prod_pdf":[]},{"id":14519,"part_number":"IS200DAMCG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","short_desc":"GE Mark VI Board IS200DAMCG1A","content":"

The IS200DAMCG1A is a type of printed circuit board or PCB. This board is what is known as an Innovation Series 200DAM Gate Drive Amplifier and Interface board. These boards are used as an interface between the devices which are in charge of switching power (IGBTs) and the control rack in a low voltage Innovation Series drive.

These devices have LEDs or light-emitting diodes which tell an operator if the IGBT is on. The DAMC is one of the variations of the DAM gate drive boards. The DAMC boards have a power rating of 250 frames. DAMC boards, as well as DAMB and DAMA boards, are responsible for amplifying current in order to provide the final stage of gate drive for a phase leg of the power bridge. These boards have a +15/-7.5 input of power supply. DAMC boards are connected directly into the IGBT gate, as well as collector and emitter terminals. DAMC boards are also connected into the IS200BPIA Bridge Personality Interface or BPIA board of the control rack. Four (4) different LEDs or light-emitting diodes are positioned on the IS200DAMCG1A. Two (2) of these, named DS1 and DS2, are yellow. The other two (2), DS3 and DS4, are green in color. The IS200DAMCG1A is a small rectangular circuit board. The DS4 and DS2 have been placed at the bottom of the left half of the PCB. These are also labeled with the initials LFF and LON respectively. Near the top of the right half of the IS200DAMCG1A are the DS1 and DS3 LEDs which are marked with the initials UON and UFF.

","meta_title":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","meta_description":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","keywords":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","series_page_description":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-12 15:36:24","prod_pdf":[]},{"id":16889,"part_number":"IS200DAMCG1ACB","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","short_desc":"GE Mark VI Board IS200DAMCG1ACB","content":"

The IS200DAMCG1ACB is a device which is known as a gate drive amplifier and interface board. This is a part of the Innovation Series. The IS200DAMCG1ACB and other DAM boards operates as an interface between the control rack and the power switching devices (also called IGBTs) in a low voltage drive in the Innovation Series. These boards contain LEDs or light-emitting diodes that indicate if the device is on or off. DAMC boards have a drive power rating of 250 frames. The IS200DAMCG1ACB is a type of printed circuit board or PCB. This printed circuit board was created by General Electric or GE to be a part of the Mark VI series. The Mark VI is one of the series in GE’s Mark lineup. These are used to automate and manage the processes of gas and steam turbines.

The IS200DAMCG1ACB and other DAMC boards, as well as DAMA boards and DAMB boards, are used to amplify current. These are used to provide final stages of gate drive for the drive’s power bridge’s phase leg. These boards have a +15/-7.5 input of power supply input. DAMC boards directly connect the IGBT gate, emitter, and collector terminals, and also the control rack’s IS200BPIA Bridge Personality Interface or BPIA board. These circuit boards do not have any fuses, testpoints, or items that are configurable. The IS200DAMCG1ACB features a group of four light-emitting diodes. Two (2) of these LEDs are green and the other two (2) are yellow. They are labeled as UON, UFF, LON, and LFF. Twelve (12) connector pins have also been positioned on the IS200DAMCG1ACB which are IGBT connections. There are also six (6) gate drive power supply pins on the IS200DAMCG1ACB.

","meta_title":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","meta_description":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","keywords":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","series_page_description":"GE MARK VI GATE DRIVE AMPLIFIER BOARD 250A","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-26 10:38:59","prod_pdf":[]},{"id":14520,"part_number":"IS200DAMDG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE DRIVER BOARD 180/125/92AMP","short_desc":"GE Mark VI Board IS200DAMDG1","content":"

The IS200DAMDG1 is a printed circuit board or PCB created by General Electric or GE. This device was developed as a part of the Mark VI series of gas and steam turbine controls. The Mark VI is just the latest series in GE’s Mark line. The Mark VI and its predecessor systems have been used to control turbines across many industries for over four decades.

The IS200DAMDG1 consists of a small board which is shaped like a C and a square-shaped board attached on its right side. On the left side of the C-shaped half is a long white component which is lying vertically on the board’s surface. Two (2) solid white resistors are positioned right next to this large component. Many very small components can also be seen on this side of the IS200DAMDG1. On the right side of the IS200DAMDG1, there is a large component which is black and silver in the center. This large component is attached to the board’s surface with a long silver metal piece on each end. The IS200DAMDG1 and other DAMD boards feature four (4) small light-emitting diodes or LEDs. The LEDs labeled as DS1 and DS2 light up yellow and the other two, labeled as DS3 and DS4, light up green. The DS1 is also named 1ON. DS2 is named 2ON, and the DS3 and DS4 are named IFF and 2FF respectively. These circuit boards contain twelve (12) IGBT connection pins. These are named G21N, COM2, NC, C2, COM1, G1IN, and C1.

","meta_title":"GATE DRIVER BOARD 180/125/92AMP","meta_description":"GATE DRIVER BOARD 180/125/92AMP","keywords":"GATE DRIVER BOARD 180/125/92AMP","series_page_description":"GATE DRIVER BOARD 180/125/92AMP","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-12 15:58:12","prod_pdf":[]},{"id":14521,"part_number":"IS200DAMDG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE DRIVER GE MARK VI CARD 180/125/92A","short_desc":"GE Mark VI Board IS200DAMDG1A","content":"

The IS200DAMDG1A is a type of PCB or printed circuit board which was produced by GE or General Electric. This circuit board was created to be a component in the Mark VI series for the control of gas/steam turbines. The Mark VI is the most recent series in General Electric’s Mark line. The Mark VI and the systems that came before it have been used to control turbines across a variety of industries for more than forty years.

The IS200DAMDG1A is made up of a small circuit board which is C-shaped and a circuit board shaped like a square which is connected to its right side. On the left half of the C-shaped card there is a long solid white component which lies horizontally on the surface of the PCB. Two (2) resistors which are solid white have been situated directly next to the large white component. A variety of very small components are also located on this end of the IS200DAMDG1A. Sitting on the right half of the IS200DAMDG1A is a large black piece which contains a silver metal part in the middle. The large white component has been connected to the surface of the board with a long metal piece that is silver on either side. The IS200DAMDG1A and the rest of the DAMD boards contain four (4) small LEDs or light-emitting diodes. The diodes which are labeled as DS2 and DS1 are colored yellow and the two others, labeled as DS4 and DS3, are green in color. The DS1 also has the name 1ON. DS2 features the name 2ON, and the DS and DS3 feature the names 2FF and 1FF respectively. These PCBs feature twelve (12) IGBT connector pins. These pins are named COM2, G21N, C2, NC, G1IN, COM1, and C1.

","meta_title":"GATE DRIVER GE MARK VI CARD 180/125/92A","meta_description":"GATE DRIVER GE MARK VI CARD 180/125/92A","keywords":"GATE DRIVER GE MARK VI CARD 180/125/92A","series_page_description":"GATE DRIVER GE MARK VI CARD 180/125/92A","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-12 16:29:24","prod_pdf":[]},{"id":14522,"part_number":"IS200DAMDG2","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GATE DRIVER CARD 180/125/92A","short_desc":"GE Mark VI Board IS200DAMDG2","content":"

The IS200DAMDG2 is a small printed circuit board or PCB which was created for the Mark VI series by General Electric or GE. The Mark VI is one of several series in the Mark lineup by GE. The Mark series are used to manage the operations of gas and steam turbines. These systems are used in a variety of different industries all around the world and have been for many decades since the introduction of the Mark I system in 1969.

The IS200DAMDG2 is a small PCB, short for printed circuit board which consists of two separate parts. The main part of the IS200DAMDG2 is a PCB which is shaped like the letter C. This small board has been attached to a black plastic piece on the bottom. Two (2) rectangular metal pieces which are silver attach the PCB to the black piece. Sitting on the left side of the IS200DAMDG2 is a long white component which is lying horizontally on the board. Directly to the right of this long component are two (2) small white resistors. A variety of very small components have been positioned around these white components. Two (2) large holes are positioned just to the left of the center of the IS200DAMDG2. These holes may be used to attach the board to another part. The IS200DAMDG2 is one of the 200DAM Gate Drive Amplifier boards and Interface boards in the Innovation Series. These printed circuit boards interface between low voltage drive’s power switching and control rack device in low voltage drives. The DAMD boards can provide an interface without amplification.

","meta_title":"GENERAL ELECTRIC GATE DRIVER CARD 180/125/92A","meta_description":"GENERAL ELECTRIC GATE DRIVER CARD 180/125/92A","keywords":"GENERAL ELECTRIC GATE DRIVER CARD 180/125/92A","series_page_description":"GENERAL ELECTRIC GATE DRIVER CARD 180/125/92A","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-12 16:54:17","prod_pdf":[]},{"id":14523,"part_number":"IS200DAMDG2A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","short_desc":"GE Mark VI Board IS200DAMDG2A","content":"

The IS200DAMDG2A Innovation Series Gate Drive Amplifier and Interface board is a printed circuit board or PCB. This board is a type of PCB or printed circuit board which was created by General Electric or GE. The IS200DAMDG2A and the rest of the DAM boards are used as an interface between the power switching devices or IGBTs and the control rack in low voltage drives. The IS200DAMDG2A may have a power rating of one-hundred twenty-five (125) frames or ninety-two (92) frames.

The IS200DAMDG2A and the other DAMD and DAME boards are used to provide an interface without amplifying and do not have any power input. DAM boards are used to attached together the collector terminals, emitter, and IGBT gate as well as the IS200BPIA Bridge Personality Interface (BPIA) board of the control rack. DAM boards do not have any fuses, test points, or items which are configurable. The IS200DAMDG2A features one dual-IGBT module for each phase leg. The IS200DAMDG2A contains four (4) light-emitting diodes or LEDs. Two of these are yellow and the other two are green. These light-emitting diodes can be identified by the labels DS1 (yellow), DS2 (green), DS3 (yellow), and DS4 (green). The LEDs have the names 1ON, 1FF, 2ON, and 2FF, respectively. The IS200DAMDG2A also contains twelve (12) connector pins which are IGBT connections that are called G2IN, COM2, NC, C2, COM1, G1IN, and C1. The IS200DAMDG2A and the other DAMD boards are small and shaped like the letter C. These boards can be added on to other larger boards if needed.

","meta_title":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK8","meta_description":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK9","keywords":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK10","series_page_description":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-27 09:31:00","prod_pdf":[]},{"id":16159,"part_number":"IS200DAMDG2AAA","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","short_desc":"GE Mark VI Board IS200DAMDG2AAA","content":"

The IS200DAMDG2AAA is a device which is known as a gate drive amplifier and interface board. These boards are used to interface between the control rack and power switching devices or IGBTs in Innovation Series low voltage drives. The IS200DAMDG2AAA is a device in the Mark VI series by General Electric. Mark VI is one of several series which make up the Mark family of devices by GE. The IS200DAMDG2AAA features a power rating of either 92 frames or 125 frames.

These devices have light-emitting diodes or LEDs. These LEDs let the user know whether the IGBT is turned off or on. The DAMDG2 is one of six (6) variations of gate drive boards named DAMC, DAMA, DAMB, DAMDG1, DAMDG2, and DAME. The boards in the DAM series are used when attaching bridge personality interfaces boards, emitters, IGBT gates, and collector terminals. These DAM boards don’t contain test points, fuses, or configurable parts. DAMD boards interface between devices without amplifying. These boards do not have any power input. The IS200DAMDG2AAA features four light-emitting diodes or IGBT driver monitors named 2FF, 2ON, 1FF, and 1ON. 2FF and 1FF are green and 2ON and 1ON are yellow. The IS200DAMDG2AAA also contains twelve (12) pins or IGBT connections which are called C1, G1IN, COM1, C2, NC, COM2, and G2IN. The IS200DAMDG2AAA and other DAMD cards like it are shaped like the letter C. A large resistor with a small knob is situated on the left side of the IS200DAMDG2AAA. This resistor is long and rectangular and positioned parallel to the left edge.

","meta_title":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","meta_description":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","keywords":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","series_page_description":"GATE DRIVER BOARD 180/125/92A GENERAL ELECTRIC MK6","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-02 12:38:52","prod_pdf":[]},{"id":14524,"part_number":"IS200DAMEG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE GATE DRIVER CAR 68A MARK VI","short_desc":"The IS200DAMEG1 is a GE Mark VI printed circuit board","content":"

The IS200DAMEG1 is a board component created by GE for the Mark VI system. The Mark VI is part of the Speedtronic line of gas/steam turbine management systems that began in 1969 with the release of the MKI and continued through the 1990s with the release of the Mark VI and the Mark VIe. The Mark VI is designed with TMR (triple modular redundant) architecture, which means it is designed around three separate and complete Control Modules, power supplies, and IONets.

The IS200DAMEG1 functions as an Innovation Series Gate Drive Amplifier/Interface board. The PCB provides an interface between power switching devices of an Innovation Series low voltage drive (IGBTs,) and the control rack. The IS200DAMEG1 is the lowest powered of the six versions of gate driver boards. It provides an interface without amplification and has no power input.

The IS200DAMEG1 connects to the control rack via the BPIA board. It has three connectors (one per phase) for Input/output with the BPIA board: APL for phase A, BPL for phase B, and CPL for phase C. It connects to the IGBT gate, emitter, and collector terminals. The IS200DAMEG1 is designed without fuses, TP test points, or configurable hardware.

It is best if the IS200DAMEG1 is treated like a static-sensitive board at all times. The manufacturer suggests the use of a grounding strap when handling board components or handling the board. The IS200DAMEG1 should be stored in anti-static bags or boxes. More information about the board and its components can be found using publications from the original manufacturer, like user guides, datasheets, and manuals.

","meta_title":"GE GATE DRIVER CAR 68A MARK VI","meta_description":"GE GATE DRIVER CAR 68A MARK VI","keywords":"GE GATE DRIVER CAR 68A MARK VI","series_page_description":"GE GATE DRIVER CAR 68A MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-22 08:10:10","prod_pdf":[]},{"id":14525,"part_number":"IS200DAMEG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GATE DRIVE MARK VI BOARD 68A","short_desc":"The IS200DAMEG1A is a GE Mark VI printed circuit board","content":"

The IS200DAMEG1A is a PCB component created by GE for the Mark VI system. This system was one of the last of the Speedtronic gas/steam turbine management line released by GE before they made it obsolete. The Speedtronic line began in the 1960s with the release of the MKI and continued through the 1990s with the Mark VI and Mark VIe. Each of these systems used the best technology available at the time of their release to create reliable management systems that would integrate with the turbine hardware and increase their efficiency by minimizing downtime.

The IS200DAMEG1A is an Innovation Series Gate Drive Amp/Interface Card. The board is used to interface between the control rack and a power switching device, like an IGBT, located in an Innovation Series low voltage drive. There are six versions of these drives, of which the IS200DAMEG1A is the lowest powered. The IS200DAMEG1A has no power input and provides no amplification for the interface.

The IS200DAMEG1A connects to the control rack’s Bridge Personality Interface board via three connectors. There is one connector per phase. These include the APL connector for A phase, the BPL connector for B phase, and the CPL connector for C phase. The board has no fuses, configurable hardware, or TP test points.

It is worth noting the IS200DAMEG1A is soldered to the IGBT module. When this board is replaced, it should be replaced in conjunction with a new IGBT module (and vice versa.) Installation procedures for the IS200DAMEG1A board can be found in manuals or user guides from the original manufacturer. GE publication GEI-100262A also has information regarding installation of this board.

","meta_title":"GENERAL ELECTRIC GATE DRIVE MARK VI BOARD 68A","meta_description":"GENERAL ELECTRIC GATE DRIVE MARK VI BOARD 68A","keywords":"GENERAL ELECTRIC GATE DRIVE MARK VI BOARD 68A","series_page_description":"GENERAL ELECTRIC GATE DRIVE MARK VI BOARD 68A","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-22 08:17:40","prod_pdf":[]},{"id":16171,"part_number":"IS200DRLYH1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE TERMINATION BD RELAY","short_desc":"The IS200DRLYH1 is a GE Mark VI printed circuit board","content":"

The IS200DRLYH1 is a board component for the Mark VI series. The Mark VI, which is a gas/steam turbine management system and is part of the Speedtronic series, is designed with triple modular redundant (TMR) architecture that employs three independent Control Modules, IONets, and power supplies.

The IS200DRLYH1 functions as a Simplex Relay Output terminal board. This is a small relay output terminal board designed to be wall-mounted (vs. DIN-rail mounted.) There are two versions of the DRLY board: H1A, which have higher powered relay contacts H1B boards, and H1B boards, which are suitable for use in UL listing for Class I, Div. 2 Hazardous Locations. The board connects to the VTUR, VCRC, or VCCC processor board using a single cable. The IS200DRLYH1 is only available in simplex version.

The IS200DRLYH1 is populated by twelve form-C dry contact output relays. These are located in two lines of six toward the center of the board. It has a mounting hole located in each corner. When the board is mounted, screws will be fastened to a metal support plate through these mounting holes.

The IS200DRLYH1 has seven terminal blocks. Six of these are 12-screw blocks and are placed on the long edges of the board, three to a side. The last block has two screws, and are used for the SCOM (chassis ground) connection, which should be as short as possible. Other components on the board include a single green LED and several yellow LEDs. The board has a single cable connector located along one short board edge. The board has no jumpers or configurable hardware.

","meta_title":"MARK VI GE TERMINATION BD RELAY","meta_description":"MARK VI GE TERMINATION BD RELAY","keywords":"MARK VI, GE, TERMINATION BD RELAY","series_page_description":"MARK VI GE TERMINATION BD RELAY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-22 15:22:41","prod_pdf":[]},{"id":16170,"part_number":"IS200DRLYH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE TERMINATION BD. RELAY","short_desc":"The IS200DRLYH1A is a GE Mark VI printed circuit board","content":"

The IS200DRLYH1A is Simplex Relay Output terminal board manufactured by GE for the Mark VI system. The Mark VI was one of the last Speedtronic management systems for gas or steam turbines released by GE. It is an integrated protection, control, and monitoring system for mechanical driver and generator applications of steam and gas turbines. The MKVI is also used as a platform for integrating power island and balance-of-plant controls. The system has an HMI/operator interface connected to the central control module (or in TMR systems, to the control modules,) which are in turn connected to terminal boards that are responsible for Inputs/Outputs.

The IS200DRLYH1A is built with twelve form-C dry contact output relays. It connects to the VTUR, VCRC, or VCC processor board using a single cable. This is a simplex board that does not support TMR applications. However, two DRLY boards can be connected to the previously mentioned boards for a total of twenty-four contact outputs. There are two versions of this board (H1A and H1B.) The H1A version has higher powered relay contacts.

The IS200DRLYH1A is built with terminal strips occupying both long edges of the board from edge to edge. Each side has 36 screw connections available. The center of the board is populated by the previously mentioned relays and cable connector. The board has no on-board suppression and no relay state monitoring. The IS200DRLYH1A does not include solenoid source power. Each relay has a corresponding LED that indicates voltage across the coil. The board is 8.5 inches long by 8.1 inches wide.

","meta_title":"MARK VI GE TERMINATION BD. RELAY","meta_description":"MARK VI GE TERMINATION BD. RELAY","keywords":"MARK VI, GE, TERMINATION BD RELAY","series_page_description":"MARK VI GE TERMINATION BD. RELAY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-25 14:13:46","prod_pdf":[]},{"id":16169,"part_number":"IS200DRLYH1AED","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE TERMINATION BD. RELAY","short_desc":"The IS200DRLYH1AED is a GE Mark VI printed circuit board","content":"

The IS200DRLYH1AED is a board component created by GE for their Speedtronic Mark VI system. The Mark VI is used as a management platform for gas and steam turbines of varying size and complexity.

The IS200DRLYH1AED is a Simplex Relay Output terminal board. This board has no suppression unless it is externally supplied. The board is populated by twelve relays with nominal 24 V dc coil. These are two-pole double throw relays with Form C contacts containing two NO and two NC contacts. The board is designed for wall mounting (not DIN-rail.) It attaches to the VCC, VCRC, or VTUR processor board via a single cable from its single 37-pin (female) cable connector. Of the two versions available of the DRLYH1 board, this is the board with the higher powered relay contacts. However, if you need a board for use in UL listing for Class I, Div 2 classified/Hazardous locations, please order an IS200DRLYH1B board.

The IS200DRLYH1AED is populated by terminal blocks down both long sides of the board. The board also has a two-position (two screw) terminal block located at the top edge of the board. This terminal block is used for the SCOM or chassis ground connection.

Each of the relays on the IS200DRLYH1AED is paired with a yellow LED indicator, which is used to show if there is voltage across the coil. The board also has a single green LED, which indicates 28 V dc power for the relay coils is reaching the IS200DRLYH1AED from the I/O board (VCCC, VTUR, or VCRC.) The board does not have jumper switches or any kind of hardware settings located on its surface.

","meta_title":"MARK VI GE TERMINATION BD. RELAY","meta_description":"MARK VI GE TERMINATION BD. RELAY","keywords":"MARK VI, GE, TERMINATION BD. RELAY","series_page_description":"MARK VI GE TERMINATION BD. RELAY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-25 14:58:33","prod_pdf":[]},{"id":53568,"part_number":"IS200DRTDH1A","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DRTDH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DRTDH1A is a PCB (printed circuit board) component manufactured by GE as part of their Mark VI Speedtronic system for the management of gas and steam turbines. “DRTD” stands for DIN-Rail Resistance Temperature Detector.

The IS200DRTDH1A is an RTD input terminal board. This board is one of several kinds of RTD input terminal boards available for the Speedtronic Mark VI system (PRTD, TRTD, SRTD.) Many of these boards are compatible with each other. Please note the IS200DRTDH1A is not compatible with the common PRTDH1A board.

RTD terminal boards act as resistance temperature detectors. They typically provide galvanic isolation or transient protection for part of the system they are attached to. Depending on the setup and type of board, RTDs can offer simplex, dual, or TMR control.

The IS200DRTDH1A is a DIN-rail mounted board. It is encircled by a DIN rail carrier on all sides. The board itself is marked with codes like PLC-4, 6DA00 and 6BA01. It also has a barcode attached near one short edge. The board has very few components, but these include one d-shell female connector with screw connects to secure cable connections, a euro-block style two-level terminal block, an integrated circuit, and two rows of capacitors. The board has been drilled in two corners.

More information about the IS200DRTDH1A, including detailed information about proper installation and handling procedures, can be found via original GE documentation like manuals and datasheets. AX Control ship from our North Carolina facility daily, Monday through Friday. Orders placed before 3 pm typically ship the same day if your part is in stock.

","meta_title":"The GE Mark VI IS200DRTDH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DRTDH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DRTDH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DRTDH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 13:55:18","updated_at":"2020-03-11 10:43:02","prod_pdf":[]},{"id":53569,"part_number":"IS200DRTDH1ABA","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DRTDH1ABA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DRTDH1ABA is a circuit board that was manufactured by General Electric for use within the company’s Mark VI system. The Mark VI was one of the final in a long line of Speedtronic systems created and marketed by GE for the control of industrial steam and gas turbine systems.

The IS200DRTDH1ABA DIN Resistance Temperature Detector Card is one of several RTD boards available for use within the Mark VI. Others include variations of the PRTD, TRTD, and SRTD. In many cases, these boards have compatibility with each other, but it is important to note the DRTD circuit board is not compatible with the PRTD board.

The IS200DRTDH1ABA is a smaller board with only a few components mounted to its surface. The board itself is designed to mount to a DIN-rail system. The edges of the board are surrounded by a DIN-carrier, and both factory-made mounting holes have been blocked by this. The board has a terminal block mounted to one long edge and a d-shell (female) connector located along the opposite long edge. The d-shell connector is used to connect a cable. The terminal block accepts wired inputs. Other board components include over two dozen capacitors and an integrated circuit. The board is also marked with several codes and a bar code.

All circuit boards are shipped in a static-sensitive bag or box. We recommend installation using a grounding strap. For more detailed help with installation, please use original documentation like manuals or data sheets. These were provided from the OEM with your original purchase.

If your in-stock purchase is placed before 3 pm, we will typically ship it the same day, Monday through Friday. Please let us know if you need expedited shipping or have any other special instructions.

","meta_title":"The GE Mark VI IS200DRTDH1ABA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DRTDH1ABA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DRTDH1ABA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DRTDH1ABA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 13:56:01","updated_at":"2020-03-11 10:58:47","prod_pdf":[]},{"id":14526,"part_number":"IS200DSCBH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DIN RAIL TB SERIAL BOARD MARK VI","short_desc":"GE Mark VI Board IS200DSCBH1","content":"

The IS200DSCBH1 is a device which is known as a DIN rail TB serial card. This is a type of printed circuit board or PCB manufactured by General Electric or GE to be a part of their Mark VI series. The Mark VI is the latest series to be released for the Mark lineup of gas/steam turbine controls. This line has been in charge of management gas and steam turbine operations since the first Mark I series was introduced in 1969.

The IS200DSCBH1 is a circuit card which is small and shaped like a rectangle. This board is situated on a mount which is referred to as a DIN rail. This mount is light grey and made from plastic. Six (6) red jumpers are positioned in a line directly in the center of the IS200DSCBH1. Each of these red jumpers is being used to connect two (2) or more metal jumper pins together. Connecting these pins together allow a user to alter the operations of the circuit board. These jumpers are bordered on either side with a series of very small components. A line of six (6) very small connector ports have been placed to the right of the jumpers. These connectors ports each contain female connectors. Another part may be connected to the IS200DSCBH1 using these small ports. Aligned on the opposite side of the red jumpers is a series of very small yellow components. One (1) connector port which is much larger than the others is placed on the far left of the IS200DSCBH1. This connector port is black with around thirty-six female connectors.

","meta_title":"GE DIN RAIL TB SERIAL BOARD MARK VI","meta_description":"GE DIN RAIL TB SERIAL BOARD MARK VI","keywords":"GE DIN RAIL TB SERIAL BOARD MARK VI","series_page_description":"GE DIN RAIL TB SERIAL BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 08:54:38","prod_pdf":[]},{"id":14527,"part_number":"IS200DSCBH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DIN RAIL TB SERIAL CARD GENERAL ELECTRIC MKVI","short_desc":"GE Mark VI Board IS200DSCBH1A","content":"

The IS200DSCBH1A is a device which is known as a din rail TB serial card. This is a form of PCB, short for printed circuit board. The IS200DSCBH1A is just one of many devices which make up the Mark VI series by General Electric or GE. The Mark VI is one of the several series in GE’s Mark line designed for the management of gas and steam turbines. The Mark line has been utilized around the world in many different industries since the debut of the Mark I series in 1969.

The IS200DSCBH1A is a small printed circuit board which is rectangular in shape. This circuit card is situated on a mount of grey plastic. A pair of two (2) large green terminal blocks are placed on the right edge of the IS200DSCBH1A. Both of the terminal blocks contain spaces for twenty-four (24) terminals for a total of forty-eight (48). The block on the left side is taller than the other. These terminals are typically silver and made from metal. Two (2) long white wires have been attached to the lower right of the IS200DSCBH1A. These wires may be used to make a connection to another circuit board or component. Directly to the left of the terminal blocks is a series of six very small connector ports which are rectangular. One (1) additional connector port has been placed on the far left side of the IS200DSCBH1A. This connector port is much larger and contains at least thirty (30) female connector points.

","meta_title":"DIN RAIL TB SERIAL CARD GENERAL ELECTRIC MKVI","meta_description":"DIN RAIL TB SERIAL CARD GENERAL ELECTRIC MKVI","keywords":"DIN RAIL TB SERIAL CARD GENERAL ELECTRIC MKVI","series_page_description":"DIN RAIL TB SERIAL CARD GENERAL ELECTRIC MKVI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-10 18:24:24","prod_pdf":[]},{"id":14934,"part_number":"IS200DSCBH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DIN RAIL TERMINAL SERIAL BOARD MARK VI GE","short_desc":"GE Mark VI Board IS200DSCBH1AAA","content":"

The IS200DSCBH1AAA is a device known as a din rail terminal serial board. This is a type of printed circuit board or PCB. This circuit card was produced for the Mark VI series by General Electric or GE. The Mark VI is the latest of several series created in the Mark line of gas and steam turbine controls.

The IS200DSCBH1AAA is a small printed circuit card with several different electronic components. This card has been mounted onto a plastic mount which is grey in color. Several metal jumper pins which are gold in color have been lined up in the center of the IS200DSCBH1AAA. Many of these pins are connected together using a series of six (6) red jumpers which are made of plastic. Using these jumpers to connect pins alters the functions of the circuit board. Six (6) very small connector ports which features female connectors are aligned directly to the right of these jumpers. On the opposing side of the jumpers, there is a line of very small components which are yellow. A long connector port which is black with silver on the sides has been placed on the left edge of the IS200DSCBH1AAA. Around thirty-six (36) female connectors are contained within this connector port. Additional components may be attached to this connector port to expand the functions of the IS200DSCBH1AAA. A pair of large green terminal blocks may be seen on the IS200DSCBH1AAA. Both of the terminal blocks may contain up to twenty-four (24) terminals each. The terminals featured within the terminal block are typically silver and made of metal.

","meta_title":"DIN RAIL TERMINAL SERIAL BOARD MARK VI GE","meta_description":"DIN RAIL TERMINAL SERIAL BOARD MARK VI GE","keywords":"DIN RAIL TERMINAL SERIAL BOARD MARK VI GE","series_page_description":"DIN RAIL TERMINAL SERIAL BOARD MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-10 19:12:06","prod_pdf":[]},{"id":14528,"part_number":"IS200DSFCG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE FEEDBACK DRIVER/SHUNT CARD MARK VI","short_desc":"GE Mark VI Board IS200DSFCG1","content":"

The IS200DSFCG1 is what is called a feedback driver/shunt card. This is a sort of printed circuit board or PCB. The IS200DSFCG1 was made to be a component in the Speedtronic Mark VI by General Electric or GE.

The IS200DSFCG1 is a large rectangular circuit board. One (1) red MOV or metal oxide varistor which is circular is situated near the top left corner of the PCB. The initials LCB are located close to this MOV. Directly below this is a series of resistors which are solid black. There are four (4) of these resistors in total which are situated around a square black transistor. One (1) small LED or light-emitting diode which is solid red is featured near these components. The words LINK ABOVE 50V are written directly above the LED. Near the lower left part of the IS200DSFCG1 are two (2) large metal components. These two (2) components are labeled as UEB and UGB. Three (3) pairs of jumper pins are situated near the center of the top border of the IS200DSFCG1. Each pair of jumper pins features a label. These labels are PL2, PL1, and PL from top to bottom. On the right side of the IS200DSFCG1, there is a large square component. This component is silver on top and black on the sides. Several integrated circuits are placed on the IS200DSFCG1. At least ten (10) integrated circuits are featured on the PCB which range in size from small to large. Several large resistors are placed on the IS200DSFCG1. Four (4) of these resistors are brown with bands that are red, black, white, and yellow.

","meta_title":"GE FEEDBACK DRIVER/SHUNT CARD MARK VI","meta_description":"GE FEEDBACK DRIVER/SHUNT CARD MARK VI","keywords":"GE FEEDBACK DRIVER/SHUNT CARD MARK VI","series_page_description":"GE FEEDBACK DRIVER/SHUNT CARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-20 16:39:17","prod_pdf":[]},{"id":14529,"part_number":"IS200DSFCG1A","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI DRIVER/SHUNT FEEDBACK GE BOARD","short_desc":"GE Mark VI Board IS200DSFCG1A","content":"

The IS200DSFCG1A is a device called a feedback driver/shunt card. This is a type of PCB (printed circuit board). General Electric created the IS200DSFCG1A as a part of GE’s Speedtronic Mark VI series.

The IS200DSFCG1A is a large circuit board which is shaped like a rectangle. Positioned near the upper left part of the PCB is one (1) circular red metal oxide varistor or MOV. The designator LCB is printed on the board near the MOV. A series of solid black resistors are situated right under the MOV. A total of four (4) of the resistors have been placed around black transistor which is shaped like a square. Sitting close to these components is one (1) small solid red light-emitting diode or LED. Printed on the board right above the light-emitting diode are the words LINK ABOVE 50V. Two (2) large components which are metal are situated close to the bottom left side of the IS200DSFCG1A. The two (2) metal components are identified with the labels UGB and UEB. Six (6) jumper pins are featured close to the upper center of the IS200DSFCG1A in three (3) pairs. Every pair of jumper pins is labeled with designators like PL, PL1, and PL2. One (1) square component which is large is situated on the right half of the IS200DSFCG1A. The square component is black on the side and silver on the top. Placed on the IS200DSFCG1A card are a series of integrated circuits. Around ten (10) integrated circuits are placed on the PCB which may be small, medium, or large.

","meta_title":"MARK VI DRIVER/SHUNT FEEDBACK GE BOARD","meta_description":"MARK VI DRIVER/SHUNT FEEDBACK GE BOARD","keywords":null,"series_page_description":"MARK VI DRIVER/SHUNT FEEDBACK GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-21 16:42:36","prod_pdf":[]},{"id":53548,"part_number":"IS200DSFCG1ACA","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSFCG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSFCG1ACA is a combination IGBT Gate Driver/Shunt Feedback board from the Mark VI Speedtronic line. This series of circuit boards originally manufactured by General Electric were used in association with gas and steam turbine control systems.

The IS200DSFCG1ACA is rated at 1000/1800 amps. It includes a fault detection circuit along with two IGBT gate drive circuits and a current sensing circuit. Both the feedback and driver circuits have been optically and galvanically isolated.

The IS200DSFCG1ACA is a nearly square circuit board with four factory-drilled mounting holes, one per corner. There are additional eyelet connectors throughout the body of the board. The board also features stab-on and plug connectors for output phase voltage sensing and DC link voltages.

Additional components on the IS200DSFCG1ACA include five LED indicators marked DS1 through DS5, which display the DC link and IGBT driver status. The board is also populated with resistors and resistor network arrays, capacitors, a transformer, over twelve integrated circuits, and three transistors.

For additional information about the IS200DSFCG1ACA, including detailed information regarding proper installation and handling procedures, please refer to manuals or datasheets originally provided by the OEM. If you no longer have access to these materials, please let our staff know when you are placing your order. AX Control maintains a library of GE manuals.

Orders for in-stock merchandise received in our office before 3 pm typically ship the same day. We offer a number of shipping options to meet your needs, including next day service; please refer to our shipping options page for details.

","meta_title":"The GE Mark VI IS200DSFCG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSFCG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSFCG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSFCG1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 14:41:03","updated_at":"2020-03-06 09:28:08","prod_pdf":[]},{"id":53369,"part_number":"IS200DSFCG1ADB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200DSFCG1ADB is a printed circuit board component that functions as a feedback driver/shunt card within the GE Mark VI Speedtronic Series.","short_desc":null,"content":"

The IS200DSFCG1ADB is a GE Mark VI circuit board. This board is part of the Speedtronic line from General Electric, which is used for steam and gas turbine control. The Mark VI is one of the final Speedtronic systems, culminating over three decades of development and research. It includes power island and balance-of-plant controls.

The IS200DSFCG1ADB functions as a Gate Driver and Shunt Feedback Board. It is designed for use with Innovation Series PWM (pulse width modulated) bridges and ac drives that are either 1000 amps or 1800 amps. Please note that a 1000 amp bridge or drive requires three DSFC boards. An 1800 amp drive or bridge requires six of these boards.

The IS200DSFCG1ADB is designed to detect two types of faults:

Undervoltage Faults: this happens when voltage between the positive and negative power supplies drops below 20V.
Desaturation Faults: this typically happens when a driver sends an “ON” command to the IGBT and voltage between emitter and collector exceeds 10V for 4 microseconds. When this occurs, the connected BPIB board brings the gate voltage down to zero.

The board can also generate two faults, including a DI/DT fault that occurs when there is a 100% or greater step-change in the rated shunt current, as well as an IOC fault, which occurs when actual current exceeds rated current by 250%.

For more information about the IS200DSFCG1ADB IGBT gate driver board, please refer to manuals or data sheets originally provided by GE. If these have been lost or misplaced, please let your representative know when you place your order.

","meta_title":"The GE IS200DSFCG1ADB is a printed circuit board component that functions as a feedback driver/shunt card within the GE Mark VI Speedtronic Series.","meta_description":"The GE IS200DSFCG1ADB is a printed circuit board component that functions as a feedback driver/shunt card within the GE Mark VI Speedtronic Series.","keywords":"["The GE IS200DSFCG1ADB is a printed circuit board component that functions as a feedback driver\/shunt card within the GE Mark VI Speedtronic Series."]","series_page_description":"The GE IS200DSFCG1ADB is a printed circuit board component that functions as a feedback driver/shunt card within the GE Mark VI Speedtronic Series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-09-27 10:11:33","updated_at":"2020-03-06 09:53:14","prod_pdf":[]},{"id":53537,"part_number":"IS200DSFCG1AEB","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSFCG1AEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSFCG1AEB is a Shunt Feedback Board/IGBT Gate Driver that was created and marketed by GE as part of their Speedtronic Mark VI system. The MKVI is a flexible management platform for gas and steam turbine industrial systems of various sizes and complexity. It includes an HMI/operator interface with a PC-based workstation using an MS Windows platform and dynamic graphics. The system includes GE’s proprietary Control System Toolbox for online software maintenance that allows for I/O configuration and monitoring.

The IS200DSFCG1AEB is a square circuit board with multiple components. These include five LED indicators labeled DS1 through DS5, stab-on connectors, plug connectors, eyelet connectors, an isolation transformer, as well as various capacitors, diodes, resistor network arrays, resistors, transistors, and jumpers. The board is marked on two edges to allow for proper alignment. It is also marked with the GE logo and board number.

Up to six of the IS200DSFCG1AEB may be needed with 1800 amp drives or bridges. 1000 amp systems take three boards. Proper orientation of the board is critical; please be sure to notate the alignment of your old boards before removing them to properly align your new part. For more detailed information about installing the IS200DSFCG1AEB refer to manuals or data sheets originally provided by the OEM. If these are no longer available to you, AX Control may be able to provide replacements with your order.

In-stock parts that are requested before 3 pm are typically shipped out on the same day. Please let your sales representative know your preferred shipping options. All available shipping options can be found on our website.

","meta_title":"The GE Mark VI IS200DSFCG1AEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSFCG1AEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSFCG1AEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSFCG1AEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 13:22:09","updated_at":"2020-03-06 10:31:47","prod_pdf":[]},{"id":14530,"part_number":"IS200DSPXH1","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DRIVE DIGITAL SIGNAL PROCESSOR CARD","short_desc":"GE Mark VI Board IS200DSPXH1","content":"

The IS200DSPXH1 is a type of printed circuit board or PCB. This part is what is known as a drive digital signal processor card. The IS200DSPXH1 is a component in the Speedtronic Mark VI series by General Electric.

The IS200DSPXH1 is a rectangular circuit board. A large connector port is situated on the right edge of the PCB. This long connector port is labeled with the part number 913767. Sitting directly next to the connector port is a small rectangular capacitor which is solid yellow. A line of very small capacitors is placed next to this small rectangular capacitor. There are six (6) of these very small capacitors are aligned in a vertical row. On the right half of the IS200DSPXH1, there are four (4) rectangular integrated circuits which are medium in size. Three (3) of these are lined up in a vertical row near the top of the board while the last one (1) is sitting at the bottom edge. Each of these integrated circuits is labeled with their part numbers on the top in white writing. Two (2) large black devices which are square shaped are positioned in the center of the IS200DSPXH1. A medium-sized connector port is placed on the IS200DSPXH1 to the left of these large components. This black connector port contains a total of twenty (20) pins. Two (2) more small ports are situated directly to the left of this connector port. Five (5) integrated circuits are lined up along the top of the IS200DSPXH1 which are medium in size. To the left of these mid-sized integrated circuits, one (1) square-shaped silver capacitor has been placed on the IS200DSPXH1.

","meta_title":"GE DRIVE DIGITAL SIGNAL PROCESSOR CARD","meta_description":"GE DRIVE DIGITAL SIGNAL PROCESSOR CARD","keywords":"GE DRIVE DIGITAL SIGNAL PROCESSOR CARD","series_page_description":"GE DRIVE DIGITAL SIGNAL PROCESSOR CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:09:40","prod_pdf":[]},{"id":15008,"part_number":"IS200DSPXH1A","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MARK VI BOARD","short_desc":"GE Mark VI Board IS200DSPXH1A","content":"

The IS200DSPXH1A is what is known as a digital signal processor control board. This is a type of printed circuit board or PCB. The IS200DSPXH1A is a primary controller for bridge and motor regulator and gating functions.

The IS200DSPXH1A has a high performance digital signal processor, standard memory components, and application specific integrated circuit which performs custom logic functions. The IS200DSPXH1A’s digital signal processor runs at sixty (60) MHz. Four external interrupts which are stack overflow, inner loop load pulse, and two configurable inputs are provided. The IS200DSPXH1A also has FLASH, RAM, NVRAM, and add-only memory. On the right end of the IS200DSPXH1A, there is a long connector port. This connector port may be used to connect other boards or other components to the IS200DSPXH1A. Situated directly next to this connector port, there are three (3) integrated circuits which are black and rectangular. Several other integrated circuits are positioned around the IS200DSPXH1A. These integrated circuits vary in size and shape. Two (2) small silver capacitors are situated on the right side of the board next to this connector port. These capacitors are arranged together in a pair. Two (2) solid yellow capacitors are positioned at the lower right corner of the IS200DSPXH1A. In the center of the IS200DSPXH1A, there are two (2) large black components. These large components are shaped like squares. On the left border of the IS200DSPXH1A, there is a long black component. This component features two (2) connector ports. These connector ports may also be used to connect extra components or boards to the IS200DSPXH1A.

","meta_title":"GENERAL ELECTRIC MARK VI BOARD","meta_description":"GENERAL ELECTRIC MARK VI BOARD","keywords":null,"series_page_description":"GENERAL ELECTRIC MARK VI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-28 13:20:48","prod_pdf":[]},{"id":53530,"part_number":"IS200DSPXH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1AAA is a Digital Signal Processor Control Board. This circuit board acts as a controller for gating functions and as a motor regulator and bridge regulator for Mark VI Speedtronic systems.

The IS200DSPXH1AAA is designed with application-specific integrated circuits that perform custom logic functions. There are sixteen integrated circuits on the surface of the board, including two that are protected by covering shields mounted to the surface of the board. These maintain RAM, NVRAM, Flash, and add-only memory.

The IS200DSPXH1AAA is designed with a front faceplate attached to the short front edge. This faceplate is marked with the GE logo and with the board’s part number. It also includes openings for two LEDs (Status and Fault) and two right-angled male port connectors. These are labeled on the board surface as P5 and P6. Other connectors on the board include a backplane connector (P1) and a vertical male pin connector (P7.)

Other board components on the IS200DSPXH1AAA include resistors, capacitors, and transistors. Most components are marked with reference designators for easy identification. The board is marked with codes like 6BA00 and 6DA00.

For more information about the IS200DSPXH1AAA Digital Signal Processor Board, please refer to original documentation that was provided with your OEM purchase, like datasheets, user guides, and product manuals. We may have replacements for this documentation if your copies have been misplaced.

AX Control ships every day from our warehouse in North Carolina, Monday through Friday. Most in-stock products ordered before 3 pm will be shipped out the same day. If you need expedited shipping, please let us know. Shipping options can be found on our website. We are also happy to work with your private courier if you prefer.

","meta_title":"The GE Mark VI IS200DSPXH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\\\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 12:00:26","updated_at":"2020-03-10 08:26:15","prod_pdf":[]},{"id":53528,"part_number":"IS200DSPXH1ACA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1ACA is a Digital Signal Processor Control Board designed as part of the GE Mark VI system. The Mark VI is a later Speedtronic system designed to manage industrial steam or gas turbine systems.

The IS200DSPXH1ACA is used to control generator field control functions in EX2100 exciters. It can also be used in Innovation Series drives as a motor regulator or to control gating functions. The board is designed to perform custom logic functions using its standard memory components and digital signal processor. The digital signal processor on the board runs at 60 MHz.

The IS200DSPXH1ACA includes onboard firmware. This is stored in flash memory. The firmware includes boot loader controls for power-up sequences, application code for the drive or exciter, and configuration parameters.

Components on the IS200DSPXH1ACA include two LED indicators, seven plug connectors, several resistor network arrays, sixteen integrated circuits, as well as resistors, diodes, capacitors, and several transistors. The board is marked with codes to aid in the identification of components. A front faceplate is attached to the front edge that is marked with the board ID number and the GE logo. This is equipped with two clips that help secure the board into place within a rack system.

For additional information regarding proper handling, installation, or replacement of the IS200DSPXH1ACA, please refer to the documentation provided with your original purchase from GE, like manuals, data sheets, or user guides. AX Control may be able to provide duplicates of these publications with your order if your copies have been misplaced.

","meta_title":"The GE Mark VI IS200DSPXH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 11:38:22","updated_at":"2020-03-10 08:57:28","prod_pdf":[]},{"id":53529,"part_number":"IS200DSPXH1ADA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1ADA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1ADA circuit board, which is part of the GE Mark VI Speedtronic line, is a Digital Signal Processor Control board. This PCB is designed for use within Innovation Series drives and within EX2100 exciters to provide processing, interface, and logic functions.

The IS200DSPXH1ADA is built with a high-performance DSP (digital signal processor) and an application-specific integrated circuit. The board runs at 60MHz. The board includes a watchdog timer, stack overflow detection, and also has five differential pair application inputs that drive two 16-bit up/down counters. These can also be used as up to ten discrete inputs.

The IS200DSPXH1ACA has a front faceplate with two embedded LED indicators. These are labeled “Status” and “Fault.” The Status LED is green. It is driven by the DSP and will flash when the DSP is running. Solid on means stopped, and off means a fault has occurred. The Fault LED is red. It is also run by the DSP. The Fault LED remains off when no faults are present but will be on or flashing during reset or if a fault is detected.

The IS200DSPXH1ACA has multiple port I/O connectors. This includes a P1 backplane connector, a P5 DSP emulator port, and a P6 engineering monitor port. The P5 and P6 ports are mounted into the front faceplate. There is also a P7 vertical pin port that is typically only used during development.

For additional information about the IS200DSPXH1ACA, please refer to datasheets, user guides, or manuals provided with your original equipment from the manufacturer. If these have been misplaced or lost, AX Control may be able to provide you with replacement copies along with your order.

","meta_title":"The GE Mark VI IS200DSPXH1ADA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1ADA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1ADA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1ADA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 11:57:28","updated_at":"2020-03-10 09:08:16","prod_pdf":[]},{"id":53453,"part_number":"IS200DSPXH1B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1B is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"GE Digital Signal Processor Control Board (DSPX)","content":"

The IS200DSPXH1B is a Digital Signal Processor Control Board (DSPX) made by GE for its Innovation Series of drives.

The IS200DSPXH1B’s main purpose is to control the motor regulator, the bridge regulator, and all gating functions. It has the ability to control the EX2100 exciter’s generator field control applications. This system can provide interfacing capabilities, processing power, and logic functions. This board has standard Innovation Series memory components, a high-performance digital signal processor, and the ability to perform custom logic functions using application-specific integrated circuits. This card uses a combination of flash memory, RAM, NVRAM, and add-only memory to store a variety of data.

The front of the IS200DSPXH1B has two LED indicators that are labeled Status and Fault. It has an HS serial port and another pin connection port labeled EMUL. The internal circuitry of this PCB includes a P1 card slot connection, a P7 male pin connector, 16 integrated circuits, 7 resistor networks, 3 transistors, and 6 ferrite beads. There are also numerous capacitors, resistors, and diodes on the card.

When installing the IS200DSPXH1B, it is important to place it into the correct card slot on the storage rack assembly. Failure to do so could result in damage to the electronics because the card slots are keyed to specific boards. To prevent any type of static damage to this board, always store it in anti-static bags or boxes and always use a grounding wristband when handling this component.

For more information about the IS200DSPXH1B, please refer to GE Datasheet: GEI-100267A.

","meta_title":"The GE Mark VI IS200DSPXH1B is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1B is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1B is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1B is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-11 15:09:05","updated_at":"2019-12-16 09:22:29","prod_pdf":[]},{"id":53446,"part_number":"IS200DSPXH1BBA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":"GE IS200DSPXH1BBA is a Digital Signal Processor Control PCB (DSPX) for the Innovation Series.","content":"

General Electric created the IS200DSPXH1BBA as a Digital Signal Processor Control PCB (DSPX) for the Innovation Series.

The IS200DSPXH1BBA can control the bridge regulator, motor regulator, and gating functions for the system. It can control an EX2100 exciter’s applications with the generator field control. The DSPX can interface, process power, and process logic functions. This card has memory components that come standard with many Innovation Series devices. The DSPX uses RAM, NVRAM, flash memory, and add-only memory to store a wide variety of information. It has high-performance digital signal processors and the capability to run custom logic functions with integrated circuits that are application specific.

There are two LED indicators on the front faceplate of the IS200DSPXH1BBA that are labeled Fault and Status. It possesses a pin connector labeled EMUL and a port that is labeled HS Serial. On the PCB there are numerous resistors, capacitors, and diodes. There are 16 integrated circuits, 3 transistors, 7 resistor networks, a single P1 card slot connector, and 6 ferrite beads.

When the IS200DSPXH1BBA is installed, it is essential to make sure it is installed into the right slot on the card rack. Placing the DSPX in the wrong slot could damage the card or the backplane of the card rack. In order to avoid any kind of static damage, it is important to maintain antistatic procedures while handling and installing the DSPX.

For more info about the IS200DSPXH1BBA, please consult the original datasheet: GEI-100267A created by General Electric. Only a trained professional should attempt to install the DSPX.

","meta_title":"The GE Mark VI IS200DSPXH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1BBA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-10 12:33:07","updated_at":"2019-12-18 09:20:37","prod_pdf":[]},{"id":53531,"part_number":"IS200DSPXH1BCA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1BCA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1BCA from General Electric is a Digital Signal Processor Control Board created for use with Innovation Series drives and EX2100 exciters.

The IS200DSPXH1BCA is primarily used to control the motor regulator and bridge regulator, but can also be used for gating functions and generator field control applications. It has processing power, logic functions, and interfacing capabilities. The board is designed to perform custom logic functions using a high-performance digital signal processor and application-specific circuits.

The IS200DSPXH1BCA is designed with an attached front faceplate. This has embedded in its surface two LED indicators labeled “Status” and “Fault” as well as two Input/Output ports. The I/O ports are the DSP emulator port (P5) and the engineering monitor port (P6.) The board also has a backplane connector (P1) located on the opposite short board edge, as well as a vertical pin connector (P7) that is usually only used during board development.

The IS200DSPXH1BCA is populated by sixteen integrated circuits, two of which are protected by connected shields. It has transistors, resistor network arrays, resistors, diodes, and capacitors. Most components are marked with designators for easy identification.

Make sure to install the board into the proper rack slot to avoid damaging the card or the rack system. We ship the board in an anti-static sleeve to protect it from any possible damage during shipment and recommend storing it in an anti-static bag or box.

For additional information about installation procedures, refer to datasheets, manuals, or user guides from GE. Information about shipping options can be found on our website, or call for more information.

","meta_title":"The GE Mark VI IS200DSPXH1BCA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1BCA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1BCA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1BCA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 12:02:49","updated_at":"2020-03-10 09:29:14","prod_pdf":[]},{"id":53467,"part_number":"IS200DSPXH1BD","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1BD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","short_desc":"GE Innovation Series Digital Signal Processor PCB (DSPX)","content":"

The IS200DSPXH1BD is a Digital Signal Processor PCB created by General Electric as a part of the Innovation Series.

The IS200DSPXH1BD is also known by the acronym DSPX. It can control the motor and bridge regulators as well as all of the gate functions for the system. It has the ability to also control the field control applications on an EX2100 exciter module. The DSPX can process power, logic functions, and can interface with other PCBs. It has several memory elements that come standard. It has add-only memory, flash memory, RAM, and NVRAM that has the capability to store a wide-ranging array of information.

There are LED indicators that are on the faceplate of the IS200DSPXH1BD. These two LEDs are labeled “Status” and “Fault”. The DSPX also has a male 12-pin jack that is labeled EMUL and a jack with 16-pins that is labeled HS Serial Port. On the PCB portion of this card, there are many capacitors, diodes, and resistors. There are 16 integrated circuits, 7 network resistors, 3 transistors, 6 total ferrite beads, and a P-1 connector for a card slot.

As the user is installing the IS200DSPXH1BD, it is crucial to make sure the card is installed into the correct slot on the card rack backplane. While the card slots on the backplane of an Innovation Series card rack may be individually keyed, trying to insert the wrong board into the incorrect slot could result in damage to the card and the card slot. To avoid the build-up and discharge of static electricity, it is also vital to maintain antistatic measures when handling and installing the DSPX.

","meta_title":"The GE Mark VI IS200DSPXH1BD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1BD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1BD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s Speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1BD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s Speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-12-20 08:23:51","updated_at":"2019-12-20 16:42:21","prod_pdf":[]},{"id":53399,"part_number":"IS200DSPXH1BDB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200DSPXH1BDB Speedtronic Turbine Control PCB board.","short_desc":"GE Innovation Series Digital Signal Processor Board (DSPX)","content":"

The IS200DSPXH1BDB is a Digital Signal Processor Board for the General Electric Innovation Series.

The IS200DSPXH1BDB, also known as a DSPX, has the ability to control both the bridge and motor regulators and all of the system’s gate functions. It can also control the general field control applications for an EX2100 exciter. The DSPX board can process logic functions and power and has the ability to interface with other boards. Several memory components that come standard with other Innovation PCBs also come standard with this board. It uses NVRAM, RAM, add-only memory, and flash memory that can store a wide range of information.

On the front faceplate of the IS200DSPXH1BDB, there are two LED indicators that have been labeled Status and Fault. There is a 12-pin male connector labeled EMUL and a 16-pin male serial port that is labeled HS Serial. There are numerous diodes, capacitors, and resistors on this PCB. There are 3 transistors, 6 ferrite beads, a card slot connection labeled P1, 16 integrated circuits, and 7 resistor networks.

When installing the IS200DSPXH1BDB into a system, it is vital to ensure that it is installed into the correct card slot on the rack. The card slots on the Innovation rack are specifically keyed to specific boards. If a board that it is not paired with is placed into the slot, the board or the slot may become damaged. It is also important to remember to maintain antistatic procedures when handling or installing the DSPX to avoid damage due to a buildup and release of static electricity.

","meta_title":"GE Mark VI IS200DSPXH1BDB Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200DSPXH1BDB Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200DSPXH1BDB Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200DSPXH1BDB Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-12-19 08:33:12","prod_pdf":[]},{"id":53544,"part_number":"IS200DSPXH1C","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1C is printed circuit board (PCB) from General Electric that was created as a part of the Mark VI Speedtronic System to act as a Digital Signal Processor Control Board (DSPX.) The MKVI was one of the last of the Speedtronic systems created and marketed by General Electric for the control of gas and steam industrial turbine systems. It offers triple modular redundant control, ethernet capabilities, and a Windows-based operating system.

The IS200DSPXH1C is used in both Innovation series drives as well as EX2100 exciters. It is used for field control, for gating functions, and for bridge and motor regulator control. It can store a variety of data using NVRAM, RAM, flash memory, and add-only memory.

The IS200DSPXH1C is one of seven variations of the DSPX board. It runs at 60MHz. The board has multiple specialized hardware functions including two 5 Mb/s ISBus interfaces that can be used as either master or slave and one asynchronous interface to a programmer board that includes TX, RX, and RTS data signals. It also has synchronizing load pulse signals that can capture the value of inputs or outputs like motor, bridge, or generator voltages. The board also has two PWM outputs. The outputs are at 24kHz fixed frequency and are used to drive various outputs like instrumentation meters.

Please refer to our shipping page for detailed information on shipping speeds, cost, and options. We ship globally using a variety of carriers. Most in-stock items ordered before 3 pm will ship the same day they are ordered.

","meta_title":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 13:51:12","updated_at":"2020-03-10 09:45:01","prod_pdf":[]},{"id":53545,"part_number":"IS200DSPXH1CAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1CAA is a circuit board (PCB) manufactured by GE as a component replacement part for their Speedtronic Mark VI system. The Mark VI is one of GE’s gas and steam turbine control systems, specifically that includes triple modular redundant control options with ethernet capabilities, proprietary software like CIMPLICITY, and a Windows-based operating system.

The IS200DSPXH1CAA functions within the Mark VI as a Digital Signal Processor Control Board. There are multiple versions of this board available; please be sure you are ordering the proper version for your particular system.

The IS200DSPXH1CAA is designed for use within Innovation series drives as well as EX2100 exciters. The PCB’s digital signal processor runs at 60 MHz. An ASIC revision ID register readable by the DSP is typically provided with the board. This includes most of the board’s specialized and support functions. Onboard firmware is stored in flash memory.

The IS200DSPXH1CAA is built with a right-angled backplane connector (P1.) It also has two connectors mounted into its front faceplate and an additional vertical pin connector located just behind these connectors. The board has two LED indicators mounted into the faceplate. There are sixteen integrated circuits, resistors, resistor network arrays, transistors, diodes, and capacitors. The board has been factory-drilled.

If the board is listed as currently in-stock, we can typically have it shipped to you today if your order is placed by 3 pm. We ship globally using a variety of carriers. We cannot ship to any country under US Embargo. Please note that AX Control is also happy to offer a quote on your surplus merchandise or to give you a quote for repairing your current equipment. Talk to our team today for more information.

","meta_title":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1C is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 13:52:32","updated_at":"2020-03-10 10:14:45","prod_pdf":[]},{"id":14531,"part_number":"IS200DSPXH1D","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC DSP CONTROL BOARD MARK VI","short_desc":"GE Mark VI Board IS200DSPXH1D","content":"

The IS200DSPXH1D is a device which is known as a DSP control board. The IS200DSPXH1D is a component in the Mark VI series by General Electric or GE. The Mark VI is just one of several series in GE’s Mark line.

The IS200DSPXH1D is a medium-sized printed circuit board. On the left side of the PCB, there is a slim metal plate. A white label is placed on the plate which contains the part number 25982431FB908. Two (2) opening are featured on the plate which provide access to two (2) connector ports. These two (2) small connector ports have series of male connector pins. On the right edge of the IS200DSPXH1D, there is another connector port. This connector port also contains many male pins. All of these connector ports may be used to connect other circuit boards or other components to the IS200DSPXH1D. On the lower half of the IS200DSPXH1D, there are two (2) large black components which shaped like squares. Directly to the right of these large components is a series of four (4) slim rectangular silver integrated circuits. Many black integrated circuits which come in a variety of sizes are featured all over the IS200DSPXH1D. On the top edge of the IS200DSPXH1D, two rectangular integrated circuits are paired together. Next to this pair, there are also three (3) more integrated circuits. On the right side of the IS200DSPXH1D, there is a series of three (3) integrated circuits which are lined up vertically. One (1) more of these is featured at the bottom border.

","meta_title":"GENERAL ELECTRIC DSP CONTROL BOARD MARK VI","meta_description":"GENERAL ELECTRIC DSP CONTROL BOARD MARK VI","keywords":null,"series_page_description":"GENERAL ELECTRIC DSP CONTROL BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-20 14:28:59","prod_pdf":[]},{"id":53507,"part_number":"IS200DSPXH1DBC","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1DBC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1DBC is a board component used within the Mark VI system. The Mark VI is one of the later Speedtronic systems created by GE for the control of industrial gas/steam turbine systems. The Speedtronic line began in the 1960s with the MKI and has improved and continued through to the 2000s in several new iterations, the newest being the Mark VIe. The Mark VI includes a central control module with a connected operator interface built on a Windows platform. The operator interface allows easy access to system data and alarm states from a single access point.

The IS200DSPXH1DBC functions as a Digital Signal Processor Control Board. Since there are several different versions of the DSPX board available, please be sure you are ordering the correct iteration of this board for your system.

The IS200DSPXH1DBC includes a 60 MHz digital signal processor, an application-specific integrated circuit(ASIC), and standard memory components. The ASIC provides custom logic functions and is connected to both LEDs embedded in the front faceplate connected to the circuit board. These LEDs (one red and one green) help alarm board faults.

The IS200DSPXH1DBC has several I/O connectors. This includes a single backplane connector (P1) and one vertical pin connector located near the front of the board (P7.) Additionally, there are two connectors mounted on the board’s faceplate. These function as an engineering monitor port (P6,) and a DSP emulator port (P5).

For additional information about proper installation or handling procedures for the IS200DSPXH1DBC, please refer to data sheets, manuals, or user guides that were provided by GE.

","meta_title":"The GE Mark VI IS200DSPXH1DBC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1DBC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1DBC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1DBC is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-02-28 13:25:58","updated_at":"2020-03-10 10:28:28","prod_pdf":[]},{"id":53506,"part_number":"IS200DSPXH1DBD","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH1DBD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH1DBD is a printed circuit board component manufactured and originally distributed by GE as part of their Mark VI Speedtronic line. The Mark VI was created as a control system for gas and steam industrial turbine systems, often used for energy systems. The IS200DSPXH1DBD specifically is used in Innovation Series drives and EX2100 exciters.

The IS200DSPXH1DBD is a small rectangular board with an attached front faceplate. It functions as a Digital Signal Processor Control Board and is designed with a digital signal processor connected to an ASIC (application-specific integrated circuit) that performs custom logic functions. The board is loaded with onboard firmware that is stored in its flash memory.

The board has several input/output connectors, including two in its connected front faceplate. The faceplate also has two embedded LED indicators (one green and one red) that help annunciate alarms for the processor. Additionally, the board has a right-angled backplane connector with multiple functions. These include a data bus, address bus, control output signals, keypad interface, tool interface, and VCO inputs.

The IS200DSPXH1DBD is a static-sensitive board. The use of a grounding strap is suggested at all times when handling the board or board components. To prevent damage to the board and to prevent possible electric shock, the board should only be removed or replaced when the rack is de-energized. The board should only be installed in the proper rack position by qualified personnel. Proper installation procedures can be found in GE manuals or data sheets originally provided with the IS200DSPXH1DBD.

","meta_title":"The GE Mark VI IS200DSPXH1DBD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH1DBD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH1DBD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH1DBD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-02-28 13:23:18","updated_at":"2020-03-10 10:44:12","prod_pdf":[]},{"id":14532,"part_number":"IS200DSPXH2","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DIGITAL SIGNAL PROCESSOR GE CONTROL BOARD","short_desc":"GE Mark VI Board IS200DSPXH2","content":"

The IS200DSPXH2 is a device that is called a digital signal processor control board. This is a type of printed circuit board or PCB. The IS200DSPXH2 is a component in the Mark VI series by General Electric or GE. General Electric developed the Mark VI as the latest incarnation of the Mark series. These series were created to manage the processes of gas/steam turbines across many different industries. The Mark systems have been relied on to control turbines since the Mark I came out in 1969.

The IS200DSPXH2 is a printed circuit board with many components that range in size from large to small. A large connector port is attached to the right edge of the IS200DSPXH2. This connector port is labeled with the number 913767 and the name ERN1. Two (2) large black components which are shaped like squares are situated near the middle of the IS200DSPXH2. They are connected to the board with white plastic screws. To the left of the left square is a black connector port that is smaller in size than the other. This connector port contains twenty (20) male connector pins. A number of integrated circuits have been placed all around the edges of the IS200DSPXH2. These integrated circuits range in size. Most of them are rectangular but two (2) are square-shaped. Each integrated circuit is labeled on the top with its part number in white print. A square capacitor which is made from silver metal may be found near the top left corner. This capacitor may also be known as a crystal.

","meta_title":"DIGITAL SIGNAL PROCESSOR GE CONTROL BOARD","meta_description":"DIGITAL SIGNAL PROCESSOR GE CONTROL BOARD","keywords":"DIGITAL SIGNAL PROCESSOR GE CONTROL BOARD","series_page_description":"DIGITAL SIGNAL PROCESSOR GE CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-07 16:23:44","prod_pdf":[]},{"id":53499,"part_number":"IS200DSPXH2B","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH2 is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH2B is a GE circuit board created for inclusion in the Speedtronic Mark VI line. The Mark VI is one of the later Speedtronic systems, designed to offer control for industrial gas or steam turbine systems with a triple modular redundant design, a Windows-based NT Operating system, and access to Ethernet networking.

The IS200DSPXH2B is a Digital Signal Processor Control Board. There are several versions of this board, but all come with a high-performance digital signal processor (DSP) and an application-specific integrated circuit (ASIC) that is designed to perform custom logic functions using various types of memory, including SRAM, FLASH, and add-only.

The IS200DSPXH2B is designed with multiple integrated circuits. Two of these are protected by shields connected to the surface of the board. Other components include resistors and resistor network arrays, capacitors, diodes, and transistors. The board also has multiple I/O connectors and two LED indicators. Both LED indicators and two of the I/O ports are mounted into the connected front faceplate. These are individually labeled with their respective uses as well as labeled on the board surface with their reference designator. The board has one additional vertical I/O port and a backplane connector located on the opposite edge from the front faceplate.

Please be aware the IS200DSPXH2B can be damaged during installation or removal if improperly handled. OEM recommendations suggest the use of a grounding strap at all times to reduce the chance of damage from static electricity. We ship in anti-static bags. Storage in these bags is also recommended.

","meta_title":"The GE Mark VI IS200DSPXH2 is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH2 is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH2 is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH2 is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-02-27 13:58:25","updated_at":"2020-03-10 11:05:19","prod_pdf":[]},{"id":53500,"part_number":"IS200DSPXH2BEB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH2BEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH2BEB is a GE Mark VI board component that functions as a Digital Signal Processor Control Card within EX2100 exciters and Innovation Series Drives.

The IS200DSPXH2BEB is one of several versions of the DSPX board. All versions of the board include an ASIC (application-specific integrated circuit) and a high-performance digital signal processor (DSP.) These perform custom logic, processing functions, and interface functions.

The IS200DSPXH2BEB is built with a front faceplate attached. The faceplate has two set pins that help lock the board securely into place once it is mounted into a rack system. The faceplate is marked with the GE logo and with the board ID number. It also has both of the board’s LEDs mounted into its surface as well as two of its I/O ports. The LEDs annunciate alarm states and are labeled STATUS and FAULT. The I/Os are labeled DSP emulator and Engineering monitor. Additional I/O ports include the P7 port, which is only used during development, and the P1 backplane port. This port has a number of pin signals, including DCOM power supply return, tool and keypad interface, clock signal outputs, and load pulse outputs.

AX Control maintains a large inventory of Mark VI components on-site in our North Carolina warehouse. Any order placed for in-stock merchandise before 3 pm typically ships the same day. Please let us know if you need expedited shipping. We use several carriers to ship worldwide to give our customers as many options as possible to meet their needs.

","meta_title":"The GE Mark VI IS200DSPXH2BEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH2BEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH2BEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH2BEB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-02-27 14:00:26","updated_at":"2020-03-10 11:17:51","prod_pdf":[]},{"id":14533,"part_number":"IS200DSPXH2C","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","short_desc":"GE Mark VI Board IS200DSPXH2C","content":"

The IS200DSPXH2C is what is called a drive DSP control board. This is a form of printed circuit board or PCB created by General Electric for the Mark VI series. The Mark VI is the most recent series in the Mark family of equipment which controls the functions of gas and steam turbines.

The IS200DSPXH2C is a relatively large printed circuit board. On the left edge of the IS200DSPXH2C is a long metal piece which spans the length of the border. To the right of the IS200DSPXH2C, there is a silver metal component which is shaped like a square. The part number of this capacitor is printed on the top in black writing. The most prominent components on the IS200DSPXH2C are two (2) large square components which are black. These square components are paired together in the center of the IS200DSPXH2C. Sitting between these two (2) large components are two long slim components known as a resistor network. A resistor network is a component which houses a series of resistors which are lined up. The total resistance of each resistor network is the same as the sum of the resistors located inside. These resistors networks are white in color. Five (5) more resistor networks have been placed around the IS200DSPXH2C. One of these is positioned horizontally right below the large black component on the left. The remaining four (4) resistor networks may be seen to the right of the black component on the right. A variety of several other capacitors are featured on the IS200DSPXH2C. Two (2) of these are solid yellow and rectangular and several others are very small and made of silver metal.

","meta_title":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","meta_description":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","keywords":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","series_page_description":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-07 16:56:49","prod_pdf":[]},{"id":53552,"part_number":"IS200DSPXH2CAA","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSPXH2CAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DSPXH2CAA is a board component from GE manufactured to be a part of their Mark VI system. The MKVI, designed for industrial gas and steam turbine control, was one of the last of the Speedtronic management systems released by General Electric. It offered triple modular redundant control with Ethernet capabilities. The Mark VI used proprietary software like the Control System Toolbox and CIMPLICITY graphics loaded on a Windows-based operator interface, giving users direct access to alarm states and system data.

The IS200DSPXH2CAA is a Digital Signal Processor Control Card. It can be used for Innovation Series drives or as part of EX2100 exciters and is designed with an ASIC (application-specific integrated circuit) connected with a high-performance DSP (digital signal processor.)

The IS200DSPXH2CAA includes a front faceplate that helps lock the unit into place within the rack system. The front faceplate is populated with the unit’s two LED indicators along with two of the unit’s four I/O ports. One of the LEDs is green and the other is red. Both annunciate alarm and faults within the digital signal processor. The front faceplate has been marked with the board number and with General Electric’s logo.

Other board components include 16 integrated circuits and several transistors, along with resistor network arrays and resistors, capacitors, and diodes. There is a vertical pin connector adjacent to the front I/O ports and a backplane connector along the rear edge. This connector has a complicated pin configuration that allows for many incoming and outgoing signals.

For detailed information about proper installation techniques, please refer to data sheets or user guides originally provided by General Electric. Our warehouse is located in North Carolina and maintains a large on-hand supply of Mark VI components. Most in-stock products ship the same day if ordered before 3 pm.

","meta_title":"The GE Mark VI IS200DSPXH2CAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSPXH2CAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSPXH2CAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSPXH2CAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 15:54:42","updated_at":"2020-03-10 12:49:35","prod_pdf":[]},{"id":16890,"part_number":"IS200DSPXH2DBD","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","short_desc":"GE Mark VI Board IS200DSPXH2DBD","content":"

The IS200DSPXH2DBD is a device which is known as a drive DSP control board. This is a component in the Mark VI series by General Electric. The latest in the Mark line of gas and steam turbine controls, Mark VI and its predecessors are tasked with controlling all aspects of industrial turbine management. The IS200DSPXH2DBD is a type of printed circuit board or PCB.

The IS200DSPXH2DBD is a mid-sized printed circuit board which contains a range of various electronic components. A large white connector port has been attached to the right edge of the IS200DSPXH2DBD. This connector port is solid white in color with a series of metal connector pins. Two (2) smaller connector ports which are black in color have been placed on the opposite end of the PCB. Sitting in the center of the IS200DSPXH2DBD are two (2) large black components which are made in the shape of squares. At each corner of the components is a white screw connected the devices to the circuit card. Two (2) components which are known as resistor networks have been situated between these two (2) square components. These resistor network are solid white. Each contains a group of small resistors which are aligned in a row. The total resistance of each resistor network is equivalent to the sum of the resistance of the resistors within. Two (2) additional resistor network are situated to the right of the large black components. Many integrated circuits have been connected to the surface of the board. These integrated circuits are black and range in size.

","meta_title":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","meta_description":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","keywords":null,"series_page_description":"DRIVE DSP CONTROL BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-10 19:34:12","prod_pdf":[]},{"id":53400,"part_number":"IS200DSV0H1ABA","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":4,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200DSV0H1ABA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200DSV0H1ABA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200DSV0H1ABA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200DSV0H1ABA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200DSV0H1ABA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":53401,"part_number":"IS200DSV0H2BDB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":4,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200DSV0H2BDB Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200DSV0H2BDB Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200DSV0H2BDB Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200DSV0H2BDB Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200DSV0H2BDB Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":53549,"part_number":"IS200DSVOH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DSVOH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

IS200DSVOH1A

The IS200DSVOH1A is a GE Mark VI turbine control card. Mark VI systems have been used for decades to control industrial steam and/or gas turbine systems.

The IS200DSVOH1A is an application-specific I/O card. It is designed to act as a direct interface to specific actuators or sensors. In a typical Mark VI system, there will be multiples of the IS200DSVOH1A card in use.

The IS200DSVOH1A is a box-type terminal board with two input/output channels. It offers two servo current sources with six lvdt/lvdr feedback sensors connections. Pulse rate inputs are 2-14k Hz.

The IS200DSVOH1A is a small, long rectangular board. It is drilled in two corners for mounting. The board has two terminal strips that have been placed side-by-side near the upper center edge. The lower edge is populated with two vertical female connectors. The board also has two two-position female plugs. Other board components include a relay, a dozen jumper switches, transistors, integrated circuits, capacitors, and resistors. The board is marked with the board id number, with the code 6BAO1, and with various component identifiers.

AX Control is careful to ship all circuit boards packed in anti-static wrap. We have a number of shipping options--check our shipping options page for more details. For more information about this board or about Speedtronic systems, please refer to original documentation supplied by General Electric, including datasheets, user guides, and manuals. If these items are no longer available to you, we may be able to provide replacements.

","meta_title":"The GE Mark VI IS200DSVOH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DSVOH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DSVOH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DSVOH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 14:57:33","updated_at":"2020-03-09 13:45:19","prod_pdf":[]},{"id":16928,"part_number":"IS200DSVOH1ABA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI IS200DSVOH1ABA BOARD","short_desc":"GE Mark VI Board IS200DSVOH1ABA","content":"

The IS200DSVOH1ABA is a small printed circuit board or PCB. This board is a component in the Mark VI series by General Electric or GE. The Mark VI series is the latest version of the Mark line of controls for gas and steam turbines. The IS200DSVOH1ABA is a small, long rectangular circuit board. These small circuit cards may also be referred to as daughter boards. These may be attached to the surface of larger boards to provide more functionality to the larger board.

The IS200DSVOH1ABA is a lengthy printed circuit board with numerous electronic components. In the center of the IS200DSVOH1ABA, there are two (2) long terminal blocks. Each of the terminal blocks contains a number of silver metal terminals. These terminal blocks are identified by the initials TB. Situated directly above the terminal blocks on the top are two (2) red light-emitting diodes or LEDs. To the left of these red LEDs is a small solid yellow capacitor. Placed at the top of the IS200DSVOH1ABA are two (2) connector ports. The largest is positioned in the center of the top border of the PCB. A smaller connector port is located right at the upper left corner of the IS200DSVOH1ABA. Each of these connector ports is black and they are mounted on silver metal. On either side of the IS200DSVOH1ABA, there is a collection of small black components which are shaped like squares. These components are diodes which are labeled with the letter D. Small silver and black resistors have been placed among the black diodes.

","meta_title":"GE MARK VI IS200DSVOH1ABA BOARD","meta_description":"GE MARK VI IS200DSVOH1ABA BOARD","keywords":"GE MARK VI IS200DSVOH1ABA BOARD","series_page_description":"GE MARK VI IS200DSVOH1ABA BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-07 16:42:41","prod_pdf":[]},{"id":14534,"part_number":"IS200DTAIH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI BOARD","short_desc":"GE Mark VI Board IS200DTAIH1","content":"

The IS200DTAIH1 is a PCB or printed circuit board which was made as a part of the Mark VI series by GE or General Electric. The Mark VI is just one series of several series created for the Mark line. The Mark series are were made to control gas turbines across all industries around the world.

The IS200DTAIH1 is a rectangular circuit board which is long and slim. A pair of two (2) long terminal blocks are sitting on the right half of the PCB. The two terminal blocks and the printed circuit board are green. Twenty-four (24) terminals which are made from silver metal are contained within the terminal block on the far right side. Twenty-four (24) metal terminals which are also silver are contained within the other terminal block. Positioned vertically on the IS200DTAIH1, there are four (4) circuit boards which are small in size. The small circuit cards are grouped together into two (2) pairs. Two (2) blue capacitors are situated on the lower edge of the IS200DTAIH1 which are placed between two (2) of these circuit boards. A short series of four (4) jumpers which are blue are situated on the bottom right corner of the IS200DTAIH1. The jumpers can be used by the operator to change the circuit cards functions. One (1) black connector port which is long is placed on the left side of the IS200DTAIH1. This black port has a border which is made of silver metal. Directly in the middle of the IS200DTAIH1, there is a group of four (4) black components. A series of transistors are situated in the middle of the black components and the black connector port. These transistors are half circle shaped and black in color.

","meta_title":"GE MARK VI BOARD","meta_description":"GE MARK VI BOARD","keywords":"GE MARK VI BOARD","series_page_description":"GE MARK VI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:45:54","prod_pdf":[]},{"id":14535,"part_number":"IS200DTAIH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI BOARD GENERAL ELECTRIC","short_desc":"GE Mark VI Board IS200DTAIH1A","content":"

The IS200DTAIH1A is a printed circuit board or PCB produced for the Mark VI series by General Electric or GE. The Mark VI is one of several series released in the Mark line. These series are used for the control of gas turbine systems.

The IS200DTAIH1A is a long, slim circuit board which is rectangular. Sitting along the right side of the IS200DTAIH1A, there are a pair of two (2) long terminal blocks. Like the surface of the circuit board, these terminal blocks are green. The terminal block on the far right contains twenty-four (24) metal terminals which are silver. The second terminal block also contains a total of twenty-four (24) silver metal terminals. In the center of the IS200DTAIH1A, there are four (4) small circuit boards which are positioned vertically on the PCB. These small boards are arranged in two (2) pairs. Sitting at the bottom edge of the IS200DTAIH1A sitting between two of the small circuit cards are two (2) blue capacitors. At the lower right corner of the IS200DTAIH1A, there is a small line of four (4) blue jumpers. These jumpers may be used to alter the operations of the board. Sitting along the left edge of the IS200DTAIH1A is a long connector port. The port is black and surrounded by a silver border. A group of four (4) black components is placed directly in the center of the IS200DTAIH1A. Between these components and the connector port, there is a line of transistors which are black and shaped like half circles.

","meta_title":"MARK VI BOARD GENERAL ELECTRIC","meta_description":"MARK VI BOARD GENERAL ELECTRIC","keywords":"MARK VI BOARD GENERAL ELECTRIC","series_page_description":"MARK VI BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:23:13","prod_pdf":[]},{"id":53556,"part_number":"IS200DTAIH1ABB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DTAIH1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":null,"meta_title":"The GE Mark VI IS200DTAIH1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DTAIH1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DTAIH1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DTAIH1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 16:23:51","updated_at":"2020-03-03 16:23:51","prod_pdf":[]},{"id":14536,"part_number":"IS200DTCIH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DIN RAIL CONTACT INPUT BOARD","short_desc":"GE Mark VI Board IS200DTCIH1","content":"

The IS200DTCIH1 is what is known as a din rail contact input board. This is a type of PCB or printed circuit board. The IS200DTCIH1 was produced by General Electric or GE to be a component in the Speedtronic Mark VI series by General Electric.

The IS200DTCIH1 is a long rectangular printed circuit board. One (1) large terminal block is situated along the right side of the IS200DTCIH1. This block is labeled as TB1 or terminal block 1. This long terminal block spans the entire length of the IS200DTCIH1. The terminal block contains thirty (30) terminals in total. Fifty-four (54) square black components are featured on the surface of the IS200DTCIH1. Many of these components are lined up along the board in parallel rows. The remaining components are arranged at the bottom of the PCB in pairs. Each of these square components is labeled with the letter D. These components range from D1 to D54. At least two (2) small integrated circuits can be found on the surface of the IS200DTCIH1. These integrated circuits are shaped like squares and they identified by the designator U, as U1 and U2. A series of many resistors which are solid light blue are placed on the IS200DTCIH1 in rows. Many small capacitors can also be found on the IS200DTCIH1. These capacitors appear to be solid silver in color. One (1) long connector port is placed on the left edge of the IS200DTCIH1. This connector port contains many connector points which may be used to attach another component to the IS200DTCIH1.

","meta_title":"GE DIN RAIL CONTACT INPUT BOARD","meta_description":"GE DIN RAIL CONTACT INPUT BOARD","keywords":"GE DIN RAIL CONTACT INPUT BOARD","series_page_description":"GE DIN RAIL CONTACT INPUT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 12:51:36","prod_pdf":[]},{"id":14537,"part_number":"IS200DTCIH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DIN RAIL CONTACT INPUT GE CARD MARK VI","short_desc":"GE Mark VI Board IS200DTCIH1A","content":"

The IS200DTCIH1A is a component which is called a din rail contact input board. The IS200DTCIH1A is a type of printed circuit board or PCB. The IS200DTCIH1A was made by GE or General Electric as a part of GE’s Speedtronic Mark VI series.

The IS200DTCIH1A is a printed circuit board which is long and rectangular. On the right edge of the IS200DTCIH1A, one (1) long terminal block is positioned. The terminal block is marked with the designator TB1 for terminal block 1. The long terminal block covers the entirety of the right edge of the IS200DTCIH1A. This terminal block features thirty (30) silver terminals altogether. The IS200DTCIH1A features fifty-four (54) black component which are shaped like squares. Most of these square components are aligned in parallel rows on the surface of the PCB. The rest of the square components are sitting at the lower edge of the PCB arranged in pairs. Each square component can be identified by the reference designator D. There are fifty-four (54) of these components which are named D1 through D54. Two (2) integrated circuits which are small in size can be seen on the IS200DTCIH1A. The integrated circuits are shaped like squares and they may be identified with the designator U, from U1 through U2. Many solid light blue resistors have been placed in rows on the IS200DTCIH1A. Many solid silver capacitors which are small in size are also seen on the IS200DTCIH1A. Along the left side of the IS200DTCIH1A, there is one (1) long connector port. The connector port features many points that can be used to connect an additional part to the IS200DTCIH1A.

","meta_title":"DIN RAIL CONTACT INPUT GE CARD MARK VI","meta_description":"DIN RAIL CONTACT INPUT GE CARD MARK VI","keywords":"DIN RAIL CONTACT INPUT GE CARD MARK VI","series_page_description":"DIN RAIL CONTACT INPUT GE CARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:21:35","prod_pdf":[]},{"id":14935,"part_number":"IS200DTCIH1ABB","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CONTACT INPUT DIN RAIL BOARD MARK VI GE","short_desc":"GE Mark VI Board IS200DTCIH1ABB","content":"

The IS200DTCIH1ABB is a part which is known as a DIN rail contact input board. The IS200DTCIH1ABB is a type of PCB or printed circuit board. The IS200DTCIH1ABB was produced by General Electric (or GE) to be a component in the Speedtronic Mark VI series by GE.

The IS200DTCIH1ABB is a long, rectangular printed circuit board. A large black terminal block is situated on the right side of the IS200DTCIH1ABB. This terminal block is labeled with the initials TB1, which stands for Terminal Block 1. The large terminal block covers the entire right edge of the IS200DTCIH1ABB. Thirty (30) silver terminals are featured on this terminal block. The IS200DTCIH1ABB has fifty-four (54) black square-shaped components. The majority of these square components are lined up on the IS200DTCIH1ABB in parallel rows. The rest of the black square components are placed at the bottom of the PCB in pairs. Each of these square components are marked with the initial D. Fifty-four (54) of these small components that are labeled as D1 to D54 are situated on the PCB. Two (2) small integrated circuits are located on the IS200DTCIH1ABB. These integrated circuits are rectangular and may be identified with the letter U, as U1 and U2. Many resistors which are solid and light blue are arranged in rows on the IS200DTCIH1ABB. Several small silver capacitors that are solid are placed on the IS200DTCIH1ABB. One (1) long connector port is situated on the left of the IS200DTCIH1ABB. This connector port has several points which are used to attach another part to the IS200DTCIH1ABB.

","meta_title":"CONTACT INPUT DIN RAIL BOARD MARK VI GE","meta_description":"CONTACT INPUT DIN RAIL BOARD MARK VI GE","keywords":"CONTACT INPUT DIN RAIL BOARD MARK VI GE","series_page_description":"CONTACT INPUT DIN RAIL BOARD MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 09:27:18","prod_pdf":[]},{"id":53570,"part_number":"IS200DTTCH1A","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200DTTCH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200DTTCH1A is a small board component manufactured by General Electric as part of their Mark VI Speedtronic management system built for the control of industrial gas/steam turbine systems. The Mark VI is a completely integrated monitoring and control system that can be used for balance of plant controls. It typically uses 13- or 21- slot VME card racks.

The IS200DTTCH1A has DIN rails installed. The DIN-rail components surround all four edges of the board and supply clips to the bottom of the board for DIN mounting. Additionally, the board has been drilled in at least two of its corners.

The IS200DTTCH1A functions as a termination board designed for temperature monitoring. It interfaces with a VTCC card, typically in a backup protection module. The IS200DTTCH1A is a box-type termination board. It is notated as having grounded or ungrounded characteristics.

The IS200DTTCH1A has two terminal strips placed side-by-side along one edge of the board. These are labeled one through forty-two. On the opposite side of the board, there is a single vertical female connector. Other board components include capacitors, ferrite beads, and resistors. The board is marked with codes like 6BA01 and 94-V0.

More information is available about proper installation procedures through manuals and data sheets. These were provided by GE with your original product. Replacement documentation may be found on our website.

We buy surplus equipment. If you have surplus to sell, we will be happy to provide a quote. Our North Carolina facility maintains a large in-stock inventory of GE components. Most in-stock parts will ship the same day you place your order. Please order before 3 pm for same-day shipment.

","meta_title":"The GE Mark VI IS200DTTCH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200DTTCH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200DTTCH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200DTTCH1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 13:57:02","updated_at":"2020-03-10 15:37:41","prod_pdf":[]},{"id":16953,"part_number":"IS200DVIBH1B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI BOARD","short_desc":"The IS200DVIBH1B is a GE Mark VI printed circuit board","content":"

The IS200DVIBH1B is a board component created by GE for the Mark VI system. The Mark VI is a platform for the management of gas or steam heavy duty turbines released under the Speedtronic name. This system includes a central control module connected to an operator interface (otherwise known as an HMI or human/machine interface) made from a PC workstation running a Windows OS and loaded with software designed to integrate seamlessly with turbine hardware.

The IS200DVIBH1B is a Simplex Vibration Input terminal board. This is a compact terminal board that is designed for DIN-rail mounting. It mounts to a plastic holder that then slides on the DIN rail. The board meets UL 1604 specifications for operation in a 65 degree Celsius Class 1, Division 2 environment. It is only available in simplex version. The IS200DVIBH1B connects to the VVIB processor board via a 37-pin cable connector. The board includes a 42-position screw connection terminal block. Two of these screws (41 and 42) are used for the SCOM (ground) connection. This connection should be as short as possible.

The IS200DVIBH1B receives eight vibration inputs. These can be accelerometer, velocity, Proximitor, or Velomitor inputs. Jumpers on the board assign a specific vibration sensor type to each input point. An onboard chip is used to identify the IS200DVIBH1B to the VVIB board for diagnostic purposes. Diagnostics include high/low hardware limit checks, and high/low software limit checks. Probe alarm, faults, and trip conditions will occur if either an X or y probe pair exceed limits.

The IS200DVIBH1BAB is a printed circuit board (PCB) manufactured as part of the Speedtronic control system from General Electric. GE released multiple versions of the Speedtronic control system from the 1960s onward. The Mark VI offers triple modular redundant control, a Windows-based operator interface, and Ethernet capability.

The IS200DVIBH1BAB circuit board works in conjunction with the TVIB and VVIB boards to monitor and process vibration signals. Vibration probes are used within the Mark VI control system for protective functions, monitoring vibration, rotor axial position, differential expansion, and rotor eccentricity.

The IS200DVIBH1BAB is a simplex vibration input terminal board that typically is DIN-rail mounted. The board is designed to accept up to 13 vibration probes. This includes 4 position inputs, 8 vibration inputs, and a Keyphasor input. Connection to the VVIB board is achieved via a 37-pin cable that connects into its D-shell connector. The connector has latching fasteners to keep the cable secure.

On the opposite side of the IS200DVIBH1BAB there is a Euro-block type terminal block with 42 connections available. Vibration probes are attached to the terminal block using #18 AWG shielded triplet wire. The last two screws on the terminal block (41 and 42) are to be used as SCOM ground connections. Eight jumper switches located in the center of the board can be set to assign a specific vibration sensor type to each of the input points. Other board components include integrated circuits, diodes, resistors, and capacitors.

For detailed installation instructions, please refer to Mark VI manuals or data sheets.

","meta_title":"GE Mark VI IS200DVIBH1BAB Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200DVIBH1BAB Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200DVIBH1BAB Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200DVIBH1BAB Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2020-03-10 16:08:22","prod_pdf":[]},{"id":14538,"part_number":"IS200EACFG1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG1","content":"

The IS200EACFG1 is a type of PCB or printed circuit board. The circuit board was made to be a component in the General Electric or GE’s Speedtronic Mark VI series.

The IS200EACFG1 is a printed circuit board which is rectangular in shape. Four (4) empty spaces which are shaped like squares are aligned in the center of the PCB. Each space is identified by the letter T, as T4, T3, T2, and T1. Two (2) components which are shaped like squares are situated in the spaces labeled as T3 and T4. These square devices are components which are known as transformers. A transformer is a type of component which provides the needed voltage transformation or current transformation in a printed circuit board. Transformers can be used to adjust the device’s voltage to a safe level. The transformers are devices which are mounted on the surface of the PCB. A long line of small resistors is situated on the right side of the transformers. The small resistors feature bands in various colors. These are positioned in three (3) groups of eight (8). There are a total of twenty-eight banded resistors featured on the IS200EACFG1. The last four (4) resistors are placed among the groups of eight. These four (4) resistors have bands which are blue. They are situated in two (2) pairs. Placed next to the four (4) blue banded resistors are four (4) metal test points. The test points are small components that can be used to make sure the IS200EACFG1 PCB is operating correctly. Three (3) parts which are called J514, J509, and J504 are also positioned on the right of the IS200EACFG1.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 11:20:38","prod_pdf":[]},{"id":14539,"part_number":"IS200EACFG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC CIRCUIT BOARD EX2100 AC FE MARK VI","short_desc":"GE Mark VI Board IS200EACFG1A","content":"

The IS200EACFG1A is a type printed circuit board or PCB. This circuit board was created as a component in Speedtronic Mark VI series by General Electric or GE.

The IS200EACFG1A is a rectangular circuit board. Lined up in the middle of the IS200EACFG1A, there are four (4) square-shaped spaces. Each of these spaces is labeled with the initial T, as T1, T2, T3, and T4. Two (2) components which are square shaped are positioned in the spaces called T4 and T3. The square components are devices that are known as transformers. Transformers are components that provide the necessary voltage or transformer of current in a PCB. Transformers are made to change the voltage of the device to a level which is safe. These transformers are components that are attached to the top of the PCB. On the right of the transformers, there is a long line of small resistors. These resistors have bands which come in a variety of colors. They are situated in three (3) groups of eight (8) each. A total of twenty-eight (28) resistors which are banded are situated on the IS200EACFG1A. The other four (4) resistors have been situated close to these groups of eight resistors. The last four (4) resistors contain bands that are blue in color. These resistors are arranged in two (2) pairs. Four (4) small metal test points can be found adjacent to the four (4) banded blue resistors. These test points are small metal components which are used to ensure that the IS200EACFG1A PCB is working correctly. Three (3) components which are known as J504, J509, and J514 are also placed on the right side of the IS200EACFG1A.

","meta_title":"GENERAL ELECTRIC CIRCUIT BOARD EX2100 AC FE MARK VI","meta_description":"GENERAL ELECTRIC CIRCUIT BOARD EX2100 AC FE MARK VI","keywords":"GENERAL ELECTRIC CIRCUIT BOARD EX2100 AC FE MARK VI","series_page_description":"GENERAL ELECTRIC CIRCUIT BOARD EX2100 AC FE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 10:43:48","prod_pdf":[]},{"id":16098,"part_number":"IS200EACFG1ABC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EX2100 CIRCUIT BOARD AC FE","short_desc":"GE Mark VI Board IS200EACFG1ABC","content":"

The IS200EACFG1ABC is a type of printed circuit board or PCB for short. This device was created to be a part of the Mark VI series by General Electric or GE. Mark VI is the latest series in the Mark lineup from General Electric. These are tasked with controlling the operations of gas turbines in many different industries all around the world. The IS200EACFG1ABC is a small printed circuit board which may be called a daughter board. These small circuit cards can be added to the top of a larger board and expand its capabilities.

Though the IS200EACFG1ABC is small in size, it contains a number of various electronic components. Three (3) connector ports which are small and black with metal bases. These jumper ports are labeled with names like J514 and J509. Each of these contain nine (9) female connectors. Two (2) very small metal components are sitting on the right side of the IS200EACFG1ABC underneath the middle connector port. Another two (2) of these tiny metal components are positioned beneath the top connector port. Paired up with each of these small metal components there is a very small resistor which has bands that are blue and white. Underneath each of the three (3) small connector ports is a small solid yellow capacitor. A lengthy series of these yellow capacitors and banded resistors which are white, red, and black alternate on the right half of the IS200EACFG1ABC. These small components are broken into three (3) collections of sixteen (16) components each.

","meta_title":"GE EX2100 CIRCUIT BOARD AC FE","meta_description":"GE EX2100 CIRCUIT BOARD AC FE","keywords":null,"series_page_description":"GE EX2100 CIRCUIT BOARD AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:17:54","prod_pdf":[]},{"id":16100,"part_number":"IS200EACFG1B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG1B","content":"

The IS200EACFG1B is a printed circuit board or PCB. This PCB was manufactured by General Electric or GE. The IS200EACFG1B is a component in the Mark VI series. The Mark VI is one of several series in the Mark line of controls for gas turbines. Mark series control all aspects of turbine operations and provide troubleshooting and safety for both operators and equipment.

The IS200EACFG1B is a long printed circuit board which is slim. One (1) black terminal block is located near the lower left corner of the PCB. This terminal block contains four (4) small terminals. This component is labeled with the initials TB4. Three (3) other components are featured along the left edge of the IS200EACFG1B. These are small devices made of silver metal which look like screws. The other three devices are labeled as TB1, TB2, and TB3. In the center of the IS200EACFG1B, there is a line of four (4) spaces for components. These spaces are square shaped and labeled with the initials T1, T2, T3, and T4. Two (2) of the square spaces are occupied by square shaped components called transformers. The transformers are mostly black with a red part on the top. Three (3) small connector ports are lined up along the right edge of the IS200EACFG1B. The connector ports are black and mounted on a small silver metal base. A series of many small devices are placed on the right half of the IS200EACFG1B. More than forty (40) small components are aligned on the IS200EACFG1B. This series consists of solid yellow capacitors which alternate with resistors which are banded with yellow and red.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 09:41:56","prod_pdf":[]},{"id":16099,"part_number":"IS200EACFG1BAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC AC FE EX2100 CIRCUIT BOARD","short_desc":"GE Mark VI Board IS200EACFG1BAA","content":"

The IS200EACFG1BAA is a type of printed circuit board or PCB. This circuit board was created to be a part of the Speedtronic Mark VI series by General Electric or GE.

The IS200EACFG1BAA is a rectangular printed circuit board. Four square-shaped spaces are lined up vertically in the middle of the board. These spaces are labeled with the reference designator T. They are called T1, T2, T3, and T4. Two (2) of these spaces are occupied by square-shaped components known as transformers. Transformers are devices which provide whatever voltage transformation or current transformation needed for the circuit board. Transformers may be used to change the voltage to a safe level. These transformers are surface mounted devices that sit on top of the surface of the board. To the right of these transformers is a long series of small resistors. These resistors are covered in bands that are different colors. They are arranged in three (3) groups of eight (8) each for a total of twenty-four (24) resistors. Sitting between these groups of resistors are four (4) other small resistors which contains bands that are blue in color. These four resistors are grouped together in pairs. Four (4) test points are positioned on the board next to these resistors. These test points are small metal devices which may be used to test the functionality of the IS200EACFG1BAA board. One (1) metal test point is sitting adjacent to each blue resistor. Also on the right side of the IS200EACFG1BAA, there are three (3) components which are labeled as J504, J509, and J514.

","meta_title":"GE EX2100 CIRCUIT BOARD AC FE","meta_description":"GE EX2100 CIRCUIT BOARD AC FE","keywords":null,"series_page_description":"GE EX2100 CIRCUIT BOARD AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:18:41","prod_pdf":[]},{"id":16107,"part_number":"IS200EACFG2","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG2","content":"

The IS200EACFG2 is a type of printed circuit board or PCB. This part is a component of the Speedtronic Mark VI series by General Electric or GE. The Mark VI is a series in General Electric’s Mark line.

The IS200EACFG2 is a rectangular PCB which is long. Four (4) transformers are positioned on the PCB. These transformers are arranged in a vertical line near the center of the IS200EACFG2. The transformers are square shaped. They are black on the outside and feature yellow parts on the top. These four (4) transformers are marked with the labels T1, T2, T3, and T4. One (1) rectangular black component is featured on the lower left edge. This component is identifiable with the initials TB4. On the right edge of the IS200EACFG2, there are three (3) small connector ports. These ports may be used to connect more components to the printed circuit board. A series of small resistors are featured on the IS200EACFG2. These resistors are solid yellow in color. There are a total of twenty-four (24) of these small resistors positioned on the IS200EACFG2. They are arranged in three (3) groups of eight (8) resistors each. At least four (4) test points can be found on the IS200EACFG2. These test points are made of silver metal. The circuit board’s full part number, which is IS200EACFG2, is listed at the top edge of the PCB in white print. The numbers and reference designators of all of the components situated on the IS200EACFG2 are also written on printed circuit board’s surface.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 12:13:03","prod_pdf":[]},{"id":16101,"part_number":"IS200EACFG2A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CIRCUIT BD EX2100 AC FE GENERAL ELECTRIC","short_desc":"GE Mark VI Board IS200EACFG2A","content":"

The IS200EACFG2A was manufactured by General Electric (GE) to be a part of the Speedtronic Mark VI series. This product is a type of PCB or printed circuit board. This part is a component of the Speedtronic Mark VI series by General Electric or GE. The Mark VI is just one of the series in the Mark line by General Electric.

The IS200EACFG2A is a long printed circuit board which is rectangular. Four (4) transformers can be found on the printed circuit board. The transformers are lined up vertically close to the middle of the IS200EACFG2A. These transformers are shaped like squares. The components are black on the outside and yellow on top. The four (4) transformers are labeled by the letter T with T4, T3, T2, and T1. Sitting near the bottom left of the IS200EACFG2A, there is one (1) black component which is rectangular. The black component may be identified with the name TB4. Three (3) small ports are placed on the right side of the IS200EACFG2A. These ports can be used to add extra components to the PCB. A group of small resistors is aligned on the surface of the IS200EACFG2A. These resistors are solid yellow in color. A total of twenty-four (24) small resistors are featured on the IS200EACFG2A. These are situated in three (3) groups which each have eight (8) resistors. About four (4) small components called test points have been placed on the IS200EACFG2A. The test points are made out of silver metal. The full part name of the PCB, IS200EACFG2A, is printed on the top border of the PCB in white writing. Each of the components is labeled with its part number and reference designator on the surface of the IS200EACFG2A.

","meta_title":"CIRCUIT BD EX2100 AC FE GENERAL ELECTRIC","meta_description":"CIRCUIT BD EX2100 AC FE GENERAL ELECTRIC","keywords":"CIRCUIT BD EX2100 AC FE GENERAL ELECTRIC","series_page_description":"CIRCUIT BD EX2100 AC FE GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 13:21:06","prod_pdf":[]},{"id":53565,"part_number":"IS200EACFG2AAA","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EACFG2AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200EACFG2AAA was manufactured by GE as part of their Speedtronic Mark VI series. This circuit board is designed as a replacement part for the MKVI gas/steam turbine control system, which was one of many Speedtronic systems created by GE from the 1960s onward.

The IS200EACFG2AAA is an Exciter AC Feedback board. This board is designed to measure the current and supply voltage from the Exciter AC current. The board, which is long and narrow, is designed with four transformers and can be used for 3-phase voltage measurement. The board connects to the EBKP board using a cable connection of less than 90 m. Terminal screws help attach the cable to the d-shell connectors to make sure they are firmly attached. The board has three of these d-shell connectors.

Other board components include resistors and capacitors, a terminal block, and factory-drilled holes with a conductive material.

For additional information about the IS200EACFG2AAA circuit board, please refer to user guides, data sheets or manuals originally provided with your OEM purchase from GE. These documents have important information referring to proper handling techniques that will maintain the integrity of the board and also maintain the safety of the worker. Only trained personnel should install or maintain this equipment.

AX Control is located in central North Carolina near the high-tech Research Triangle. We can ship to your location anywhere in the world, but we are also happy for you to pick up your order at our facility. Please call ahead to give us time to pull your product and have it ready for your arrival.

","meta_title":"The GE Mark VI IS200EACFG2AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200EACFG2AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200EACFG2AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EACFG2AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 10:07:05","updated_at":"2020-03-13 16:20:49","prod_pdf":[]},{"id":16102,"part_number":"IS200EACFG2ABC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG2ABC","content":"

The IS200EACFG2ABC is a small printed circuit board or PCB. This device is a component in the Speedtronic Mark VI series by General Electric or GE. The Mark VI is one of several series released in GE’s Mark line. These series were made to control and regulate all functions of gas turbines including basic operations, troubleshooting, and safety.

The IS200EACFG2ABC is a rectangular circuit board with several different electronic components. Four (4) components which are shaped like squares are lined up on the right border of the IS200EACFG2ABC. These squared components are what are known as transformers. The transformers are mostly solid black and they contain red pieces on the top. Each transformer is labeled with letter T. These components are named T4, T3, T2, and T1. Situated above these transformers, there is a large capacitor. The capacitor is solid black and it is labeled with the letter C. Positioned in the center of the IS200EACFG2ABC, there is a line of very small capacitors that are solid yellow. Twenty-four (24) of these small yellow capacitors are attached to the IS200EACFG2ABC in total. These are divided into three (3) groups of eight (8) each. Lined up along the left border is a series of three (3) resistors. The resistors are solid black and medium in size. The full name of the printed circuit board, which is IS200EACFG2ABC, is printed on the device’s surface. The reference designators of each device on the IS200EACFG2ABC is also written the surface of the PCB with white print.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 11:19:41","prod_pdf":[]},{"id":16103,"part_number":"IS200EACFG2B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG2B","content":"

The IS200EACFG2B is a printed circuit board or PCB made by General Electric or GE. This device is a component in the Mark VI series by GE. Mark VI is the latest incarnation of the Mark lineup by General Electric. These Mark series have been relied on for decades since the first Mark I was released in the late 1960s. The Mark VI and the other series were developed to control the operations of gas turbines across all industries. This is a small, slim PCB which is green in color.

The IS200EACFG2B features four (4) large transformers which are shaped like squares. Each transformer is situated inside of a white square drawn on the surface of the board. These components are marked as T1 through T4. These transformers are generally black with yellow parts on the top. Directly below these transformers on the left edge of the IS200EACFG2B is a black block of small terminals marked as TB4. Three (3) small connector ports have been placed along the right edge of the IS200EACFG2B. Each of these small connector ports contain a series of female connectors. Placed right next to each of the connector ports is a line of solid yellow capacitors which are very small. The capacitors are divided into three (3) groups of eight (8) components each. The reference designators of each component have been marked on the IS200EACFG2B’s surface with white writing. Also labeled on the top of the IS200EACFG2B is it’s full part number or name. A small white barcode has been attached to the bottom of the IS200EACFG2B.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-07 12:18:37","prod_pdf":[]},{"id":16104,"part_number":"IS200EACFG2BAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IC200EACFG2BAA","content":"

The IC200EACFG2BAA is a device known as a printed circuit board or PCB. This is one of many components in the Mark VI series produced by General Electric or GE. The Mark VI is the most recent release in the Mark lineup of gas turbine controls. The IC200EACFG2BAA is a small circuit board or daughter board. This type of circuit board may be attached to the surface of a larger board to expand its capabilities.

Though the IC200EACFG2BAA is a small circuit card, it contains many different electronic components. Four square-shaped spaces are featured lined up vertically in the center of the board. These spaces are made to house transformers. They are labeled as T3, T4, T1, and T2 from top to bottom. Two (2) of these spaces are occupied by square transformers that are red. These have yellow parts on the top. The two transformers are sitting in the spaces at the top and bottom. Positioned on the bottom of the left side of the IC200EACFG2BAA there is a black terminal block labeled as TB4. The words COIL INPUTS are written right above the terminal block. Three small silver components may also be seen on the left edge of the IC200EACFG2BAA that are marked as TB1, TB2, TB3. Above these parts are the names PHA, PHB, and PHC respectively. On the opposite half of the IC200EACFG2BAA there is a long line of small resistors and capacitors which alternate. The capacitors are solid yellow and the resistors are patterned with bands that are red and white. These are broken up into three (3) groups which each contain eight (8) components.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":null,"series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:19:24","prod_pdf":[]},{"id":16108,"part_number":"IS200EACFG3","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG3","content":"

The IS200EACFG3 is a printed circuit board or PCB manufactured by General Electric for their Speedtronic Mark VI series. Mark VI was one of several series released in the Mark line by General Electric. The Mark series are used in gas turbine systems to control all of the functions of the turbines as well as to provide troubleshooting solutions and safety for both equipment and equipment operators.

The IS200EACFG3 feature a range of different electronic components from large to small. This printed circuit board is small and rectangular in shape. Three (3) small connector ports are attached to the surface of the IS200EACFG3 positioned on the right side. These small connector ports are lined up in a vertical row. Using these small ports, extra parts may be added to the surface of the PCB. Three (3) white components which are rectangular are also situated on the IS200EACFG3. Each of these three (3) components are paired together with one (1) of the small black connector ports. Also situated in the center of the IS200EACFG3 are several very small resistors. The resistors are patterned with bands that are blue and white. Four (4) of the small blue and white resistors are paired together and arranged in a vertical line in the middle of the IS200EACFG3. One (1) solid black capacitor which is large in size is placed on the right border of the IS200EACFG3. The capacitor is identified with its reference designator C. Placed below this capacitor, there is a collection of transformers which are shaped like squares. The transformers are mostly red with black and yellow portions located on the top of the devices. The transformers are labeled as T1 through T4.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 12:29:48","prod_pdf":[]},{"id":16106,"part_number":"IS200EACFG3B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC FE","short_desc":"GE Mark VI Board IS200EACFG3B","content":"

The IS200EACFG3B is a PCB or printed circuit board. This device is a component of the Mark VI series. Mark VI is one of the series in the Speedtronic Mark line by General Electric or GE. The Mark series were created by GE to control all aspects of gas turbine operation including functions such as startup and shutdown, fuel and water regulation, troubleshooting issues, and safety for operators and turbine equipment.

The IS200EACFG3B is a small printed circuit board which is rectangular. This small circuit card is occupied with several various electronic circuit board components. Both halves of this narrow card is covered with a series of several components. Near the upper right corner of the IS200EACFG3B is a single large capacitor which is all black. Situated underneath this capacitor, there are four (4) large square components which are known as transformers. These transformers are red with black and yellow in the middle of the top of the devices. The transformers are identified by the initials T1 to T4. On the other half of the IS200EACFG3B, there are three very small connector ports which may be used to connect more components to the IS200EACFG3B. These small connector ports are black and surrounded by bases which are made of silver metal. A series of small banded resistors in white and blue can be seen on the IS200EACFG3B aligned in the middle. The numbers and names of all of the components on the IS200EACFG3B are printed on the surface of the card with white printing. The entire part name of the card, which is IS200EACFG3B, can be seen listed on the card’s surface.

","meta_title":"GE CIRCUIT BOARD EX2100 AC FE","meta_description":"GE CIRCUIT BOARD EX2100 AC FE","keywords":"GE CIRCUIT BOARD EX2100 AC FE","series_page_description":"GE CIRCUIT BOARD EX2100 AC FE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 13:35:48","prod_pdf":[]},{"id":16105,"part_number":"IS200EACFG3BAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD EX2100 AC","short_desc":"GE Mark VI Board IC200EACFG3BAA","content":"

The IS200EACFG3BAA was is a printed circuit board or PCB created by General Electric. This device was designed as a part of the Speedtronic Mark VI series by GE. The Mark VI is one of the series that make up the Mark line of gas turbine controls. Mark series control all aspects of the operations of gas turbines including basic functions like startup, shutdown, and cooldown as well as water and fuel injection, and troubleshooting. Mark systems also ensure the safety of turbine equipment and the technicians who operate it.

The IS200EACFG3BAA is a small printed circuit board which is generally shaped like a rectangle. A line of components is situated on each vertical half of the IS200EACFG3BAA. On the right half of the IS200EACFG3BAA there is a line of devices called transformers which have square of black and yellow but are mainly red. The transformers have been created in a square shape. The transformers are placed within white square shaped spaces which are marked as T1 through T4. Located near the top of the right half is one (1) all-black capacitor that is large in size. Sitting on the left of the IS200EACFG3BAA, there is a line of three (3) small jack connector ports. The connector ports are black and contain silver metal. Paired together with each of these small connector ports is a white component which is shaped like a small rectangle. In the center of the IS200EACFG3BAA, at least four (4) very small devices known as resistors have been placed in a vertical row.

","meta_title":"GE CIRCUIT BOARD EX2100 AC","meta_description":"GE CIRCUIT BOARD EX2100 AC","keywords":null,"series_page_description":"GE CIRCUIT BOARD EX2100 AC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:20:37","prod_pdf":[]},{"id":14911,"part_number":"IS200EBKPG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BACKPLANE EXCITER CONTROL BOARD GE MARK VI","short_desc":"The IS200EBKPG1 is a Mark VI backplane component","content":"

The IS200EBKPG1 is a backplane component for the Mark VI series. The Mark VI is a system out of the Speedtronic line of gas and steam turbine management series from GE.

The IS200EBKPG1 functions as the backplane for control boards and the connectors for the Input/Output terminal board cables. The IS200EBKPG1 has three sections for controllers, which are labeled M1, M2, and C. Each of these sections is built with its own power supply. The IS200EBKPG1 backplane is cooled by two fans.

The IS200EBKPG1 is essentially made of two parts. The upper part of this system consists of DIN connectors for the plug-in control boards. This housing has twenty-two individual female connectors for to plug in boards. Connectors often are designed for specific board locations. Please refer to manuals to identify where boards should be located within the housing. Boards used within the IS200EBKPG1 include ACLA, DSPX, EISB, EMIO, and ESEL boards. The DIN connectors are surrounded by a metal housing. The lower portion of the backplane has D-SUB connectors designed for Input/Output interface cables. This section also has three sets of TP test points which are labeled M1, M2, and C. There are also a number of power supply plugs. Finally, the board has several circular DIN connectors for plug-in control of keypad interface cables. Everything on the board is extensively labeled with both its use and with a reference designator.

The housing that holds the IS200EBKPG1 is built with a top hat flange on either side with three screw mounts located on each flange. The front and back of this housing is designed with a grill to allow for optimal air flow. Each side of the housing includes nylon ties to protect and control cables.

","meta_title":"BACKPLANE EXCITER CONTROL BOARD GE MARK VI","meta_description":"BACKPLANE EXCITER CONTROL BOARD GE MARK VI","keywords":"BACKPLANE EXCITER CONTROL BOARD GE MARK VI","series_page_description":"BACKPLANE EXCITER CONTROL BOARD GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 08:08:30","prod_pdf":[]},{"id":14912,"part_number":"IS200EBKPG1C","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI EXCITER CONTROL BACKPLANE CARD GENERAL ELECTRIC","short_desc":"The IS200EBKPG1C is an Exciter Control Backplane from GE","content":"

The IS200EBKPG1C is an Exciter Control Backplane for the Mark VI series. The Mark VI is part of General Electric’s Speedtronic series for steam/gas heavy-duty turbine management. Speedtronic systems have been in use since the late 1960s. Each new version improves upon the last, using the latest technology to increase the efficiency of the system. The MKVI includes triple-redundant backups on critical controls and protection parameters run from a Windows-based PC operator interface.

The IS200EBKPG1C is designed as a backplane for connectors for the I/O terminal board cables and for control boards. The front board has three sections for controllers. These are labeled M1, M2, and C. Each section has its own individual power supply. This part of the IS200EBKPG1C has D-SUB connectors for I/O interface cables. Each section has its own set of TP test points (also labeled M1, M2, and C,) as well as circular DIN connectors for plug-in control of keypad interface cables. The bottom of the board has several power supply plugs. All connectors on the board have been labeled.

The upper part of the IS200EBKPG1C is formed by a cabinet with twenty-two DIN connectors for plug-in control boards. Boards have specific connectors they should be attached to; please refer to manuals from GE for this information. The IS200EBKPG1C houses such boards as DSPX, ACLA, EMIO, ESEL, and EISB. These connectors are surrounded by a metal cabinet with an open top and a front and back grill panel. The back side of the housing has two fans located behind it to pull air through the cabinet and over the boards.

The IS200EBKPG1C housing is designed with two top hat flanges located along its bottom edge. Each of these flanges has three screw mounts cut into its surface. Nylon cable ties are located along the edge of of the housing.

","meta_title":"MARK VI EXCITER CONTROL BACKPLANE CARD GENERAL ELECTRIC ","meta_description":"MARK VI EXCITER CONTROL BACKPLANE CARD GENERAL ELECTRIC ","keywords":"MARK VI EXCITER CONTROL BACKPLANE CARD GENERAL ELECTRIC ","series_page_description":"MARK VI EXCITER CONTROL BACKPLANE CARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 08:40:20","prod_pdf":[]},{"id":53277,"part_number":"IS200EBRGH2ABA","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EX2100E EBRG IS200EBRGH2A Bridge Interface Board","short_desc":null,"content":"

IS200EBRGH2ABA

The IS200EBRGH2ABA is an Exciter Bridge Interface Board (EBRG) used in the EX2100e Excitation Control system. The EX2100e is a GE system of control hardware and software designed for new and retrofit gas, steam and hydro generators. This system integrates easily with the Mark VI and Mark VIe systems, as well as with GE’s LS2100e Static Starter. The EX2100e can also integrate with other DCS (distributed control systems) via ModBus ethernet connections.

The IS200EBRGH2ABA is one of the EX2100e’s control and I/O boards that interconnect via HSSL communication with the main control processor board. It is a rectangular board with mounting holes for screws or standoff hardware drilled in each corner, once along each edge, and several times within the body of the board. The board has four standoffs pre-mounted in its body to allow for the addition of a daughterboard. There are multiple connector components, including two female cable connectors located side-by-side near the pre-mounted standoff hardware, along with twenty-one female plug components that range from two-position plugs to eight-position plugs.

Other board components include six transformers, an inductor coil, transistors, six heat sinks, and integrated circuits. The board also uses resistors, diodes, and capacitors. Capacitors include high-voltage electrolytic, polyester vinyl, and other types of capacitors. It also has a set of jumper switches. The board is marked with several codes, including FA/00, 94V-0, 1812, and TTM4-10.

Data sheets and product manuals originally provided by General Electric will give additional information regarding proper installation techniques, handling guidelines, as well as more information about board components.

","meta_title":"GE EX2100E EBRG IS200EBRGH2A Bridge Interface Board","meta_description":"GE EX2100E EBRG IS200EBRGH2A Bridge Interface Board","keywords":"["GE EX2100E EBRG IS200EBRGH2A Bridge Interface Board"]","series_page_description":"GE EX2100E EBRG IS200EBRGH2A Bridge Interface Board","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-05-16 08:08:04","updated_at":"2019-05-16 09:22:27","prod_pdf":[]},{"id":14840,"part_number":"IS200ECTBG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EX2100 TERMINAL BOARD GENERAL ELECTRIC","short_desc":"The IS200ECTBG1 is a GE Mark VI printed circuit board","content":"

The IS200ECTBG1 is an Exciter Contact Terminal Board designed as a component for the Mark VI series from GE. The Mark VI is part of the Speedtronic line of gas/steam turbine management systems. The Mark VI is built with Ethernet-based LAN with peer-to-peer communication between controls, starters, HMIs, and historians. The MKVI has an operating temperature of 0 to 45 degrees Celsius.

The IS200ECTBG1 is designed to be used within redundant systems only. ECTBG2 board would be used in simplex systems. The IS200ECTBG1 is designed with four general-purpose Form-C relay contact outputs that are controlled by the EMIO board. There are also six auxiliary contact inputs that are wetted (powered) with 70 VDC from the IS200ECTBG1 board. Power comes from the M1 and M2 power supplies.

The IS200ECTBG1 is built with two terminal board strips. It has a total of ten relays (some mentioned above.) The board has two three-position female plugs as well as three multi-pin male connectors. The board has sixteen integrated circuits and seven red light emitting diodes. The board is populated with various capacitors, resistors, and diodes.

The IS200ECTBG1 has two notched corners. The board also has several factory-made drill holes and several cutouts along its leading edge. Most components are marked with reference designators.

Most of our in-stock products will ship ‘same day’ if ordered by 4 pm. Please discuss shipping preferences with your sales representative. If you would like a shipping quote before we ship your product, your sales representative will be happy to help with that.

","meta_title":"EX2100 TERMINAL BOARD GENERAL ELECTRIC","meta_description":"EX2100 TERMINAL BOARD GENERAL ELECTRIC","keywords":"EX2100 TERMINAL BOARD GENERAL ELECTRIC","series_page_description":"EX2100 TERMINAL BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 15:19:39","prod_pdf":[]},{"id":14841,"part_number":"IS200ECTBG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BD-EX2100 TERMINAL GE BOARD MARK VI","short_desc":"The IS200ECTBG1A is a GE Mark VI printed circuit board","content":"

The IS200ECTBG1A functions as an Exciter Contact Terminal Card within the Mark VI series. The Mark VI was one of the last of the Speedtronic series released by General Electric for the management of gas and steam turbines. It is an adaptable system that can be used for a variety of applications. Many of the modules in the Mark VI are available in Simplex and triple-redundant form to allow the MKVI to be used on both small platforms and large integrated systems with architectures ranging from single to many modules. The MKVI is the third of the Speedtronic systems to use triple redundant controls.

The ECTB board comes in two different versions. The IS200ECTBG1A is designed for use within redundant systems only (please refer to our ECTBG2 boards if you have a Simplex system.)

The IS200ECTBG1A is built with six auxiliary contact inputs. Contact inputs on the ECTB are powered by the M1 and M2 power supplies. The board has four general purpose Form-C relay outputs. These are controlled by the EMIO board. The board also includes two trip contact outputs driving a customer lockout.

The IS200ECTBG1A has two terminal board strips. There are two three-position plugs located in one corner of the board. The leading edge of the board has three vertical male connectors. The board also has seven red LEDs (light emitting diodes,) and sixteen integrated circuits. Various diodes, resistors, and capacitors populate the board. The rear edges of the board have been notched, while the leading edge has four cutouts located along it.

Our team will carefully pack your order for shipment, including the use of an anti-static wrap to protect from static discharge during transit. Most in-stock products ordered by 4 pm will ship ‘same day.’ If you have special shipping requirements, please mention them to your sales representative during the order process.

","meta_title":"BD-EX2100 TERMINAL GE BOARD MARK VI","meta_description":"BD-EX2100 TERMINAL GE BOARD MARK VI","keywords":"BD-EX2100 TERMINAL GE BOARD MARK VI","series_page_description":"BD-EX2100 TERMINAL GE BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 15:55:31","prod_pdf":[]},{"id":53518,"part_number":"IS200ECTBG1ABB","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200ECTBG1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200ECTBG1ABB is a board component within the Mark VI Speedtronic system from General Electric. This system was designed and distributed by GE for the management of gas and steam industrial turbine systems.

The IS200ECTBG1ABB functions to support excitation contact inputs and outputs. There are two basic versions of the ECTB board: the G1 board, which is used only in TMR systems, and the G2 board, which is used in simplex systems. Both boards are designed with two trip contact outputs for a customer lockout feature, as well as four Form C (general purpose) relay contact outputs. These contacts are typically controlled by the connected EMIO circuit board. The board also has a 52G and 86 G contact input that are monitored and powered by the ECTB board, along with four additional contacts. Power for the IS200ECTBG1ABB board is received from M1 and M2 power supplies.

Other board components on the IS200ECTBG1ABB include three d-shell connectors, multiple integrated circuits, resistors, capacitors, and diodes. The board is marked with reference designators to allow for easy identification of components. The board also carries the GE logo, a bar code, and several additional codes.

Refer to your original documentation from General Electric for detailed instructions regarding the installation or replacement of the IS200ECTBG1ABB. These can also be found in GE manuals or user guides. If these are no longer available to you, AX Control may be able to provide duplicates with your order. Most orders ship the same day they are placed if we receive your request before 3 pm our time and the item is currently in-stock in our warehouse.

","meta_title":"The GE Mark VI IS200ECTBG1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200ECTBG1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200ECTBG1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200ECTBG1ABB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 10:30:32","updated_at":"2020-03-16 09:34:47","prod_pdf":[]},{"id":53519,"part_number":"IS200ECTBG1ADE","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200ECTBG1ADE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200ECTBG1ADE is designed to function as an Exciter Contact Terminal Card in the Mark VI Speedtronic series. This was one of the final systems released by GE under the Speedtronic name for the management of steam and gas industrial systems. A flexible system that can be used in a variety of applications, the Mark VI can be designed as either Simplex or TMR (triple modular redundant) form to meet the needs of both large and small systems. The MKVI is the 3rd Speedtronic system to offer TMR control.

The ECTB terminal card is offered in two basic configurations. The IS200ECTBG1ADE is used in redundant systems only. If you are running a Simplex system, please refer to our ECTBG2 boards.

The IS200ECTBG1ADE has six auxiliary contact inputs. These are powered by the M1/M2 power supplies. The board also has four additional general-purpose (Form-C) relay outputs. The Form C outputs are controlled by the nearby, connected EMIO board. The IS200ECTBG1ADE has two more trip contact outputs that drive a customer lockout.

The IS200ECTBG1ADE has two terminal strips located along one edge. Two three-position plugs are on the surface of the board. Additionally, the board has three d-shell connectors for connecting cables along one long edge. The board has been shaped (notched) along both long edges.

Every board that leaves our facility is carefully packed for shipment using anti-static wrap to protect it from damage during transit. Most of our in-stock inventory will ship the same day your place your order. Please give us at least two hours before end-of-day to get your shipment ready.

","meta_title":"The GE Mark VI IS200ECTBG1ADE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200ECTBG1ADE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200ECTBG1ADE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200ECTBG1ADE is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 10:36:14","updated_at":"2020-03-16 09:54:43","prod_pdf":[]},{"id":14540,"part_number":"IS200ECTBG2","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC TERMINAL BOARD","short_desc":"The IS200ECTBG2 is a GE Mark VI printed circuit board","content":"

The IS200ECTBG2 is an Exciter Contact Terminal Board that has been manufactured as a component for the Mark VI series. Designed for steam/gas turbine management, the Mark VI is part of General Electric’s long-running Speedtronic line, which began in the 1960s with the release of the Mark I system. The Mark VI is designed with a Windows-based PC operator interface that is built with proprietary software like CIMPLICITY graphics. This operator interface allows for all control data to be accessed from a single point.

The IS200ECTBG2 is designed for use in Simplex systems only. Please refer to our ECTBG1 boards if you are running a redundant system. More information on the wiring and placement of the ECTBG2 board can be found in General Electric publication GEH-6631, “EX2100 Excitation Control Installation and Startup.”

The IS200ECTBG2 is built with six relays. These are located in two lines toward the center of the board. The board includes two terminal strips on one edge of the board. A single three position plug is located in one corner opposite these terminal strips, and a male vertical connector is located along the opposite edge. The board is also populated with twelve integrated circuits, seven red LEDs, and various diodes, capacitors, and resistors. It is worth noting the locations of other components are marked on the board but are empty; these are components that differ between the ECTBG1 and ECTBG2 boards.

The IS200ECTBG2 will be carefully packed by our team for shipment to your facility. Please let your sales representative know when you place your order if you have any special shipping requirements.

","meta_title":"GENERAL ELECTRIC TERMINAL BOARD","meta_description":"GENERAL ELECTRIC TERMINAL BOARD","keywords":"GENERAL ELECTRIC TERMINAL BOARD","series_page_description":"GENERAL ELECTRIC TERMINAL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 08:25:52","prod_pdf":[]},{"id":14541,"part_number":"IS200ECTBG2A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"TERMINAL CARD GE MARK VI","short_desc":"The IS200ECTBG2A is a GE Mark VI printed circuit board","content":"

The IS200ECTBG2A is a GE printed circuit board component manufactured for the Mark VI series. The MKVI was one of the last of the Speedtronic gas/steam turbine management systems to be released by General Electric. While all of the Speedtronic systems were designed to be adaptable and scalable, the Mark VI can be designed with single or multiple modules using either Simplex or redundant modes, which means it can easily be used in a variety of applications.

The IS200ECTBG2A is for use in Simplex systems only. If you are running a redundant system, please refer to the ECTBG1 boards located on our site. Information on the placement and wiring of the ECTB series of boards may be found within the GE publication GEH-6631, entitled “EX2100 Excitation Control Installation and Setup.”

The IS200ECTBG2A has a total of six relays. Four of these are general purpose relays and two are trip relays. The board has two terminal strips that are located side-by-side along one board edge. Not all locations on the terminal strips are used. The board has a single three-position plug located in one corner and a vertical male connector located along the rear edge. It also has seven light emitting diodes (red,) and twelve integrated circuits. Other board component locations have been marked but are empty; these are components that differ between the two versions of ECTB boards.

If you are experiencing an emergency downtime scenario, please let our team know. We will work with your courier service to get a part to you as quickly as possible. AX Control can ship to any country in the world not currently affected by US embargo.

","meta_title":"TERMINAL CARD GE MARK VI","meta_description":"TERMINAL CARD GE MARK VI","keywords":"TERMINAL CARD GE MARK VI","series_page_description":"TERMINAL CARD GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 08:48:29","prod_pdf":[]},{"id":14542,"part_number":"IS200EDCFG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EX2100 DIRECT CURRENT FEEDBACK","short_desc":"The IS200EDCFG1 is a GE Mark VI printed circuit board","content":"

The IS200EDCFG1 is a Direct Current Feedback Card (EX2100) for the Mark VI series from GE. This series is part of the Speedtronic line of gas/steam turbine management systems. The Mark VI is designed to be a complete protection, control and monitoring solution for heavy duty turbine systems used in a variety of applications.

The IS200EDCFG1 measures field voltage and field current at the SCR bridge. Field current is measured via a shunt in the DC field circuit. There are seven selector settings on the field voltage circuit to scale down the bridge voltage, if necessary. The IS200EDCFG1 creates an interface to the EISB board within the control panel using a high-speed fiber-optic link.

The IS200EDCFG1 is designed with two relays, a single inductor coil, several transistors, and six integrated circuits. The board also has two heat sink components located opposite each other on one short side of the board. Two connectors are located on the board, including a P1 connector that is a 2-position female connector. There is an additional four-input female plug that is labeled “input.” The board has several electrolytic capacitors as well as polyester vinyl capacitors and capacitors of other material. The board tends to use metal film resistors. The surface of the IS200EDCFG1 is drilled with four factory-made mounting holes. Most components are labeled.

Our team will carefully pack the IS200EDCFG1 for transit to your facility, including the use of anti-static material to protect the board from damage during transit. Please follow all installation procedures as recommended by the manufacturer.

","meta_title":"GE EX2100 DIRECT CURRENT FEEDBACK","meta_description":"GE EX2100 DIRECT CURRENT FEEDBACK","keywords":"GE EX2100 DIRECT CURRENT FEEDBACK","series_page_description":"GE EX2100 DIRECT CURRENT FEEDBACK","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 09:16:26","prod_pdf":[]},{"id":14543,"part_number":"IS200EDCFG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI EX2100 DC FEEDBACK GE BOARD","short_desc":"The IS200EDCFG1A is a GE Mark VI printed circuit board","content":"

The IS200EDCFG1A is a PCB component manufactured by GE for the Mark VI series. The MKVI is part of the Speedtronic line of steam/gas turbine management systems that have been part of the GE lineup since 1969. The Mark VI uses a PC-based Operator Interface that has been loaded with proprietary software like CIMPLICITY graphics and GE’s program for maintenance, the Control System Toolbox.

The IS200EDCFG1A has been created to function as an EX2100 Direct Current Feedback Card. This card measures field current and field voltage at the SCR bridge. Field current is measured in the DC field circuit. The EDCF board interfaces to the EISB board in the control panel using a fiber-optic link that provides voltage isolation and high noise immunity between the two boards.

The IS200EDCFG1A is built with a coil inductor, two relays, six integrated circuits, and several transistors. Two heat sink components are attached to the board near one short edge, facing each other. The board also has two connectors, both female. One, labeled P1, is a 2-position plug. The other is a two-by-two plug and is labeled as an input. The board uses polyester vinyl and electrolytic capacitors. Most resistors are made of metal film. The board is marked with bridge voltage scale down selectors.

Our team will make sure your purchase is properly packed and ready for transit to your facility. This includes the use of a static reducing covering or sleeve. If you have special shipping needs please discuss these with your sales representative when you place your order. AX Control can ship most in-stock boards same day, if your order is placed before 4 pm.

","meta_title":"MARK VI EX2100 DC FEEDBACK GE BOARD","meta_description":"MARK VI EX2100 DC FEEDBACK GE BOARD","keywords":"MARK VI EX2100 DC FEEDBACK GE BOARD","series_page_description":"MARK VI EX2100 DC FEEDBACK GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 09:47:55","prod_pdf":[]},{"id":53566,"part_number":"IS200EDCFG1ACB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EDCFG1ACB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200EDCFG1ACB is a board component made by General Electric as part of the Speedtronic series. This series was designed by GE for the management of gas and steam industrial turbine systems and has been part of GE’s catalog since the late 1960s. The Mark VI one of the later iterations of the Speedtronic series that includes a PC-based operator interface pre-loaded with software like Control System Toolbox for maintenance and CIMPLICITY graphics.

The IS200EDCFG1ACB is an EX2100 Direct Current Feedback card. The card measures field voltage and current at the SCR bridge. It interfaces with EISB via the control panel using high-speed fiber-optic connections. These connections give the boards high noise immunity and also provide voltage isolation.

The IS200EDCFG1ACB has two relays, a coil inductor, integrated circuits, transistors, and two heat sinks. The heat sinks are located facing each other and are placed near the edge of the board. The board also has two female connectors, including a 2-position (P1) plug. Most resistors are made from metal film. Capacitors vary and may be polyester vinyl or electrolytic material.

AX Control carefully packs all orders to make sure your order is received exactly as it leaves our facility. This includes the use of anti-static bags or wraps to provide extra protection. If you have any special shipping requirements please let us know when you place your order. We can accommodate most requests, including providing blind shipping. Most of our in-stock products will be shipped the same day your order is placed. Please allow at least two hours before our end of the day to give us time to pull and properly pack your purchase.

","meta_title":"The GE Mark VI IS200EDCFG1ACB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200EDCFG1ACB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200EDCFG1ACB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EDCFG1ACB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 10:21:14","updated_at":"2020-03-16 10:19:59","prod_pdf":[]},{"id":14998,"part_number":"IS200EDCFG1AED","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"SPEEDTRONIC EXCITER DIRECT CURRENT FEEDBACK BOARD GE","short_desc":"The IS200EDCFG1AED is a GE Mark VI printed circuit board","content":"

The IS200EDCFG1AED is an EX2100 Direct Current Feedback Card designed as a component for the Mark VI series. This series is part of GE’s Speedtronic series for steam or gas heavy-duty turbine management. The Speedtronic series has been used for the management of heavy duty turbines since the release of the Mark I system in 1969. The Mark VI is significantly more advanced than that first system, with a Windows-based PC operator interface that includes proprietary software like the GE Control System Toolbox and their CIMPLICITY graphics. The MKVI is available in Simplex and Triple Redundant form.

The IS200EDCFG1AED is designed to measure field current and field voltage at the SCR bridge. It interfaces to the EISB board in the control panel. Voltage isolation is accomplished by this interface via a fiber-optic link. The link also provides high noise immunity. The field voltage feedback circuit on the IS200EDCFG1AED has seven selector settings that scale down the bridge voltage.

The IS200EDCFG1AED has two relays, a coil inductor, six integrated circuits, and multiple transistors. Heat sinks are used in two locations to help dissipate heat more quickly to allow components work at their optimum level. The board has two plugs. These include a two-position plug labeled P1 and a four-position plug listed as an input.

AX Control will ship your part anywhere in the world not currently affected by US embargo. Most in-stock parts can be shipped the same day. Please follow all manufacturer recommended installation procedures as printed in manuals and data sheets. If these have not been retained, please speak to your sales representative.

","meta_title":"SPEEDTRONIC EXCITER DIRECT CURRENT FEEDBACK BOARD GE","meta_description":"SPEEDTRONIC EXCITER DIRECT CURRENT FEEDBACK BOARD GE","keywords":"SPEEDTRONIC EXCITER DIRECT CURRENT FEEDBACK BOARD GE","series_page_description":"SPEEDTRONIC EXCITER DIRECT CURRENT FEEDBACK BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 08:24:57","prod_pdf":[]},{"id":14913,"part_number":"IS200EDCFG1B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EX2100 FEEDBACK DC EXCITER CARD GENERAL ELECTRIC","short_desc":"The IS200EDCFG1B is a GE Mark VI printed circuit board","content":"

The IS200EDCFG1B is a circuit board component that functions as a Direct Current Feedback card within the Mark VI series from GE. The MKVI is part of GE’s Speedtronic series, which has been managing heavy-duty gas and steam turbines since the late 1960s. The MKVI is designed to be used in a variety of applications and offers a complete monitoring, control, and protection solution. The MKVI includes a Windows-based PC operator interface that functions as a gateway for communication links to other control systems. However, since all control and protection resides within the MKVI control panel (not the HMI or operator interface,) this PC can be replaced or reinitialized with processes running without impacting the control system.

The primary function of the IS200EDCFG1B is to handle bridge dc voltage and current feedback. The board measures field voltage and field current at the SCR bridge. A fiber-optic link between the EISB board in the control panel provides voltage isolation and noise immunity.

The IS200EDCFG1B has two plug connectors. These are labeled P2 (two position plug) and as an input (4 position plug.) The board has several high voltage electrolytic capacitors, as well as capacitors of other material. The board has six integrated circuits, a coil inductor, multiple transistors, and two relays components. Two heat sinks are attached to the board to allow for quick dissipation of excessive heat. It is also worth noting the board is marked with seven bridge voltage scale down selectors.

Your purchase will be carefully packed for transit to your facility. This includes the use of an anti-static sleeve or bag to protect from static discharge during shipment. If your company has any specific shipping needs, your sales representative will be happy to make arrangements for these when you place your order.

","meta_title":"EX2100 FEEDBACK DC EXCITER CARD GENERAL ELECTRIC","meta_description":"EX2100 FEEDBACK DC EXCITER CARD GENERAL ELECTRIC","keywords":"EX2100 FEEDBACK DC EXCITER CARD GENERAL ELECTRIC","series_page_description":"EX2100 FEEDBACK DC EXCITER CARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 08:48:23","prod_pdf":[]},{"id":14879,"part_number":"IS200EDEXG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI DE EXCITER BOARD","short_desc":"The IS200EDEXG1 is a GE Mark VI printed circuit board","content":"

The IS200EDEXG1 is a GE PCB component made for the Mark VI series. The Mark VI is part of the Speedtronic line of steam/gas turbine management systems produced by GE since 1969 when the Mark I was first released.

The IS200EDEXG1 functions as an Exciter De-Excitation board. It is the primary board in the de-excitation module and provides conduction sense feedback and de-excitation SCR firing. The IS200EDEXG1 is usually controlled by the EXTB board, but it can initiate de-excitation on its own if control fails.

The IS200EDEXG1 is built with eight high voltage electrolytic capacitors. The board has two relays, over fourteen transistors, and two heat sink components to dissipate heat more quickly. The board has over fifteen bias jumpers. Several of these metal components are connected to each other using surface wiring. The board has two male vertical pin connectors placed along one edge, as well as four plug connectors. The board has multiple integrated circuits. It has six light emitting diodes, including two red and four green. These are placed in a line near the high voltage electrolytic capacitors. The board is populated with metal film resistors and capacitors of various materials. All corners have been factory drilled.

The team at AX Control will happily quote shipping costs to your facility’s location upon request. We maintain relationships with several of the largest shipping companies to provide our customers with a variety of shipping options. AX Control ships worldwide. We can ship anyplace not currently affected by US embargo.

","meta_title":"GE MARK VI DE EXCITER BOARD","meta_description":"GE MARK VI DE EXCITER BOARD","keywords":"GE MARK VI DE EXCITER BOARD","series_page_description":"GE MARK VI DE EXCITER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 09:35:02","prod_pdf":[]},{"id":14880,"part_number":"IS200EDEXG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DE EXCITER CARD-EX2100 GENERAL ELECTRIC","short_desc":"The IS200EDEXG1A is a GE Mark VI printed circuit board","content":"

The IS200EDEXG1A is a component created for the Mark VI series from GE. The Mark VI is designed as a complete integrated protection, control, and monitoring system for mechanical and generator drive applications of gas or steam turbines. The hardware and software of the Mark VI are designed in coordination with GE’s turbine design engineering to ensure optimal performance from a fully integrated platform. This includes the use of proprietary software like GE’s CIMPLICITY graphics and their Control System Toolbox, which can be accessed using the Windows-based PC operator interface designed into the Mark VI.

The IS200EDEXG1A is an Exciter De-exciter Card. This board provides de-excitation SCR firing and conduction sense feedback and is the primary board in the excitation module. Under normal conditions, it is controlled by the EXTB board. However, it can initiate de-excitation on its own if this control fails.

The IS200EDEXG1A is built with four plugs. It has two vertical male connectors that are located side-by-side on one board edge. The board has eight high voltage electrolytic capacitors centered in the middle of the board. Two heat sinks are placed on one side of these components. Two relays are located on the other side. The board also has over fourteen transistors and several integrated circuits. It also has over fifteen bias jumpers, some of which are connected to each other via surface wiring connections. Six light emitting diodes (two red, four green) are located on one side of the board. The board uses metal film resistors. The corners of the board have been factory drilled. Four additional factory-made holes are parallel to one short edge.

","meta_title":"GE DE EXCITER CARD-EX2100 GENERAL ELECTRIC","meta_description":"GE DE EXCITER CARD-EX2100 GENERAL ELECTRIC","keywords":"GE DE EXCITER CARD-EX2100 GENERAL ELECTRIC","series_page_description":"GE DE EXCITER CARD-EX2100 GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 10:00:04","prod_pdf":[]},{"id":53403,"part_number":"IS200EDFFH3AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200EDFFH3AAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"","meta_title":"GE Mark VI IS200EDFFH3AAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200EDFFH3AAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200EDFFH3AAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200EDFFH3AAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2019-11-19 14:56:42","prod_pdf":[]},{"id":14544,"part_number":"IS200EGDMH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GND DETECTOR BOARD GENERAL ELECTRIC","short_desc":"The IS200EGDMH1 is a GE Mark VI printed circuit board","content":"

The IS200EGDMH1 is a Mark VI component created by GE. The Mark VI is part of the Speedtronic line, which was designed by GE for the management of its heavy-duty gas and steam turbines.

The IS200EGDMH1 functions as an Exciter Ground Detector Module. This board works in conjunction with an EXAM board to detect field ground leakage current. It is worth noting a simplex system uses one of these boards, while a redundant system will use three. This module can detect field leakage from both the ac and the dc side of the field circuit. In redundant systems, these boards are configured as <C> Controller, <M1> Master 1, and <M2> Master 2. Each of these configurations is controlled by pins on the P2 connector. More information about the placement and wiring of these boards can be found in GEH-6632, EX2100 Excitation Control User’s Guide.

The IS200EGDMH1 is built with a front faceplate. This is a double height, double slot board. It mounts into the EPBP backplane. This faceplate has several warning lights. It also carries the GE logo and the board number. The board has two backplane connectors (P1 and P2,) as well as a single relay, seven high voltage capacitors, integrated circuits, metal film resistors, and a CPU socket. Most components are marked with reference designators.

AX Control offers multiple shipping options using a variety of carriers. Most in-stock products can ship same-day if ordered by 4 pm. Please let your sales representative know if you have any special shipping requirements.

","meta_title":"GND DETECTOR BOARD GENERAL ELECTRIC ","meta_description":"GND DETECTOR BOARD GENERAL ELECTRIC ","keywords":"GND DETECTOR BOARD GENERAL ELECTRIC ","series_page_description":"GND DETECTOR BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 10:40:25","prod_pdf":[]},{"id":14545,"part_number":"IS200EGDMH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EX2100 GND DETECTOR CARD MARK VI","short_desc":"The IS200EGDMH1A is a GE Mark VI printed circuit board","content":"

The IS200EGDMH1A is a PCB component for the Mark VI series from GE. The Mark VI is the fifth gas/steam turbine management series released by GE under the Speedtronic umbrella.

The IS200EGDMH1A works with an EXAM card to detect any field ground leakage current anywhere in the field circuit of the generator to ground, on both the ac and the dc side. Simplex systems use a single EGDM board. Redundant systems need three. The three boards are then configured as a Controller <C1> that receives information from the active DSPX, a Master 1 <M1> which provides the drive signal to the Attenuator Module’s sense resistor, and a Master 2 <M2.> GE publication GEH-6632 (EX 2100 Excitation Control User’s Guide) has more information on these boards and their setup.

The IS200EGDMH1A is designed with a wide front panel. The IS200EGDMH1A is a double-slot board. The front panel includes the manufacturer’s logo, the board number, and several warning lights.

The IS200EGDMH1A is built with two backplane connectors. It has seven high voltage capacitors that are placed in two lines. The board has one relay, one CPU socket, and multiple integrated circuits. The board is built with metal film resistors as well as resistors of other material.

AX Control can ship worldwide, to anywhere not currently affected by US embargo. Most in-stock products will ship from our warehouse the day of order placement. We offer a variety of shipping speeds and options through several different carriers to meet the needs of our customers.

","meta_title":"EX2100 GND DETECTOR CARD MARK VI","meta_description":"EX2100 GND DETECTOR CARD MARK VI","keywords":"EX2100 GND DETECTOR CARD MARK VI","series_page_description":"EX2100 GND DETECTOR CARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 11:00:10","prod_pdf":[]},{"id":14546,"part_number":"IS200EGPAG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PULSE AMP BOARD MARK VI","short_desc":"The IS200EGPAG1 is a GE Mark VI printed circuit board","content":"

The IS200EGPAG1 is a GE component made for the Mark VI series from the Speedtronic series of gas/steam turbine management. The Speedtronic series has progressed through several iterations as technology allowed General Electric to improve this line. What began with the Mark I, which used simple circuitry by today’s standards has now become the multi-module Mark VI with its triple redundant backups on critical controls and protection parameters. The MKVI is built with a Windows-based PC operator interface that allows the user to access all analog and digital data from a single location.

The IS200EGPAG1 functions as an Exciter Gate Pulse Amplifier Board. This board interfaces with control to the power bridge. This board takes six gate commands coming from the ESEL board and uses them to control the gate firing of up to six SCRS on the bridge. The IS200EGPAG1 is also the interface for temperature monitoring, bridge airflow, and current conduction feedback.

The IS200EGPAG1 is built with a line of light emitting diodes placed on its front board edge. These LEDs are used to give a visual indication of currents in the bridge, of output firing, bridge temperature, cooling fan rotation, and alarm or fault conditions. Three four-position plugs are located next to the LEDs.

The IS200EGPAG1 is built with six transformers in a line, thirteen heat sinks, two other transformers, five jumpers, a coil inductor, thirteen high-voltage electrolytic capacitors, and two CPU sockets. The board has multiple two-position plugs as well as other plugs. There is a single vertical pin connector on the board. The board uses a variety of integrated circuits, capacitors of various material, and resistors of metal film and other material. Most components are marked with reference designators.

","meta_title":"GE PULSE AMP BOARD MARK VI ","meta_description":"GE PULSE AMP BOARD MARK VI ","keywords":"GE PULSE AMP BOARD MARK VI ","series_page_description":"GE PULSE AMP BOARD MARK VI ","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:10:48","prod_pdf":[]},{"id":14547,"part_number":"IS200EGPAG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"OBS GATEPULSE APMLIFIER GE MARK VI","short_desc":"The IS200EGPAG1A is a GE Mark VI printed circuit board","content":"

The IS200EGPAG1A is a General Electric component created to fit into the Mark VI series. The Mark VI is part of the Speedtronic series for steam/gas turbine management. Each of the Speedtronic systems has improved upon the previous version as GE refined and updated the technology. Thus the simple (by today’s standards) circuit boards of the MKI has now moved to the multi-frame Mark VI with triple redundant backups and Ethernet capability. The MKVI uses a Windows-based PC HMI, or operator interface, that allows access to important system data at a single location, including time tags for alarms and events.

The IS200EGPAG1A is an Exciter Gate Pulse Amplifier Card. The IS200EGPAG1A is designed to interface with control to the power bridge. It also takes gate commands (up to six) from the ESEL board and uses them to control gate firing of SCRS on the bridge.

The components on the IS200EGPAG1A include a line of LEDs located along the front board edge. These are used to indicate output firing, bridge temperature, currents in the bridge, alarm or fault conditions, and cooling fan rotation. The board has thirteen plugs. This includes six two-position plugs located along the left edge, one two-position plug in the upper right corner and another along the right edge, one six-position plug, three four-position plugs along the front edge, and a single twelve-position plug. The board also has one male vertical pin connector, as well as two CPU sockets.

The IS200EGPAG1A is built with thirteen heat sinks, five jumper switches, eight total transformers, a coil inductor, and thirteen high-voltage electrolytic capacitors. The board also has a number of integrated circuits, metal film resistors, and capacitors made from various materials.

","meta_title":"OBS GATEPULSE APMLIFIER GE MARK VI","meta_description":"OBS GATEPULSE APMLIFIER GE MARK VI","keywords":null,"series_page_description":"OBS GATEPULSE APMLIFIER GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-20 14:59:04","prod_pdf":[]},{"id":53516,"part_number":"IS200EGPAG1ABD","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EGPAG1ABD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200EGPAG1ABD is a Mark VI Speedtronic board component from General Electric. The Mark VI is used for the management of industrial steam and gas turbines. This system is designed with the capability of setup in either Simplex or TMR (triple modular redundant) form in order to meet the needs of the turbine. The board is typically used in EX2100 excitation systems.

The IS200EGPAG1ABD functions as an Exciter Gate Pulse Amplifier circuit board. It is used to interface with controls to the system’s power bridge. The IS200EGPAG1ABD also can control the gate firing of SCRs on the bridge (up to six SCRs.)

The IS200EGPAG1ABD has a line of LED indicators along its front edge. These LEDs are used for the indication of various things, including cooling fan rotation, alarm and fault condition, bridge currents and temperature, and output firing. Other board components include 5 jumper switches, 8 transformers, 13 high-voltage electrolytic capacitors, a coil inductor, and a number of integrated circuits, capacitors, and resistors. The board also has 13 plugs on its surface including 7 two-position plugs, 3 four-position plugs, a twelve-position plug, and a six-position plug.

More information about the proper handling, installation, or maintenance of the IS200EGPAG1ABD may be found through documentation originally provided by General Electric. This includes user guides and manuals. If your copies of these publications are no longer available we may be able to provide replacements with your order.

AX Control ships products every day, Monday through Friday. Most in-stock products will ship the same day you place your order. If you are local to our North Carolina facility, call ahead and we can have your order ready for local pick-up. We are also happy to work with your courier.

","meta_title":"The GE Mark VI IS200EGPAG1ABD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200EGPAG1ABD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200EGPAG1ABD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EGPAG1ABD is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 10:17:24","updated_at":"2020-03-16 10:43:35","prod_pdf":[]},{"id":14910,"part_number":"IS200EGPAG1B","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PULSE AMPLIFY GENERAL ELECTRIC CARD MARK VI","short_desc":"The IS200EGPAG1B is a GE Mark VI of printed circuit board","content":"

The IS200EGPAG1B is a component manufactured by GE for their Speedtronic Mark VI system. The Mark VI, like all of the Speedtronic systems, is designed for gas/steam turbine management. The Mark VI is the fifth of these systems to be commercially released and is one of the most technologically advanced Speedtronic systems. It is available in both a Simplex and redundant version and can be scaled for the application/use it is being applied to by the number and type of modules built into the system.

Bridge control passes through the IS200EGPAG1B. One EGPA, which stands for Exciter Gate Pulse Amplifier, is required per power control module. The IS200EGPAG1B is the interface for bridge airflow, temperature monitoring, and for current conduction feedback.

The IS200EGPAG1B has many connectors and plugs. This includes eight 2-position plugs, three 4-position plugs, a 6-position plug, and a 12-position plug. The board also has vertical male multi-pin connector as well as two CPU sockets.

The IS200EGPAG1B is built with a line of light emitting diodes along the front edge. These LEDs give users a visual indication of such things as output firing, currents in the bridge, bridge temperature, alarm or fault conditions, and cooling fan rotation.

The IS200EGPAG1B has thirteen heat sink components. The board has a coil inductor, two large transformers, and thirteen high-voltage electrolytic capacitors. The board also has five jumper switches and multiple integrated circuits, as well as metal film resistors and capacitors of various materials. Components on the board tend to be marked with reference designators.

","meta_title":"PULSE AMPLIFY GENERAL ELECTRIC CARD MARK VI","meta_description":"PULSE AMPLIFY GENERAL ELECTRIC CARD MARK VI","keywords":"PULSE AMPLIFY GENERAL ELECTRIC CARD MARK VI","series_page_description":"PULSE AMPLIFY GENERAL ELECTRIC CARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:15:25","prod_pdf":[]},{"id":16156,"part_number":"IS200EHFCH2","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI EXCITER FAN CONTROL","short_desc":"The IS200EHFCH2 is a GE Mark VI printed circuit board","content":"

The IS200EHFCH2 is a small board component for the Mark VI series. The Mark VI is part of the Speedtronic line of gas and steam turbine control systems, which has had decades of research and development. The Mark VI is considered a completely integrated system for the protection, monitoring, and control for generator and mechanical drive applications of heavy-duty turbine systems. The Mark VI includes a Windows PC-based operator interface that connects to the system’s 13- or 21-slot standard VME board rack control module.

The IS200EHFCH2 is an Exciter Fan Control Board. This is a very small printed circuit board with very few components. The board is built with three individual plug connectors. One is a 2-position plug, one a 3-position plug, and one is a 4-position plug. The board has one CPU chip (U1) and another integrated circuit (U2.)

The IS200EHFCH2 is built with two display lights. These are marked “Stat” and “Flt.” Both are mounted toward the board edge. The board has four TP test points. Next to the four test points, the board is built with a field of small metal points laid out two by ten. These are labeled IA/00. There are two factory-drilled holes with metal inserts located on this side of the board. These are labeled as “E1” and “E2.” The board has three jumper switches. It is worth noting that while JP2 and JP3 are two position jumpers, J1 is a three position jumper. The board is also populated with several lines of capacitors and resistors. Most components on the board are labeled with a number and a reference designator.

","meta_title":"GE MARK VI EXCITER FAN CONTROL","meta_description":"GE MARK VI EXCITER FAN CONTROL","keywords":"GE MARK VI EXCITER FAN CONTROL","series_page_description":"GE MARK VI EXCITER FAN CONTROL","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 10:21:40","prod_pdf":[]},{"id":16158,"part_number":"IS200EHFCH2A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI EXCITER FAN CONTROL","short_desc":"The IS200EHFCH2A is a GE Mark VI printed circuit board","content":"

The IS200EHFCH2A is a small PCB component for the Speedtronic Mark VI turbine control system from GE. The Mark VI has several decades of research and development behind its integrated control, protection and monitoring system that is considered a complete solution for the management of heavy-duty turbine systems. The hardware and software of the Mark VI have been designed in close coordination with each other. The Windows-based PC operator interface is preloaded with proprietary software specifically designed for turbine management, like CIMPLICITY graphics and GE’s Control System Toolbox. The operator interface has Ethernet capability for communications.

The IS200EHFCH2A functions as an Exciter Fan Control board. This small board has very few components. The most prominent components on the board include three plug connectors located on the right edge. From back to front these include a three-position, a four-position, and a two-position plug. On the opposite side of the board, the IS200EHFCH2A is populated with three jumper switches. It must be noted that while JP2 and JP3 are two position jumpers, JP1 has three positions. Manufacturer manuals or data sheets will provide information on jumper settings.

The front edge of the IS200EHFCH2A includes two display lights that are marked “FLT” and “STAT.” Four TP test points are located to the right of these lights, and next to these is a field of two by ten metal points. This field is labeled IA/00. The board number is marked just below this field.

Other components on the IS200EHFCH2A include two integrated circuits, two factory drilled holes marked E1/E2, and several resistors and capacitors. Reference designators and numbers are used to mark components.

","meta_title":"GE MARK VI EXCITER FAN CONTROL","meta_description":"GE MARK VI EXCITER FAN CONTROL","keywords":"GE MARK VI EXCITER FAN CONTROL","series_page_description":"GE MARK VI EXCITER FAN CONTROL","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 10:57:57","prod_pdf":[]},{"id":16157,"part_number":"IS200EHFCH2ACB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI EXCITER FAN CONTROL","short_desc":"The IS200EHFCH2ACB is a GE Mark VI printed circuit board","content":"

The IS200EHFCH2ACB is a printed circuit board created by GE for the Mark VI. The Mark VI is part of the Speedtronic series of gas/steam turbine management systems. The MKVI uses UDH or Unit Data Highway Ethernet-based LAN with peer-to-peer communication between most modules in the system (control module, excitation controls, starters, HMIs, PLC controls, and Historians.) Links for communication from the MKVI to remote computers can be achieved through an optional RS232 Modbus port in Simplex systems or from communication drivers in the HMI in redundant systems. Time synchronization can be used to synch HMIS and controls on the UDH.

The IS200EHFCH2ACB is a small board that functions as the Exciter Fan Control board. The board has few components. On the left edge of the board, three jumper switches are lined up from top to bottom. It must be noted that while JP2 and JP3 are two-position switches, JP1 is a three position switch. More information relating to jumper settings may be found in GE data sheets or manuals referencing the IS200EHFCH2ACB.

The IS200EHFCH2ACB has three female plugs for connection to other boards. These include, from back to front, a 2-position, a 4-position, and a 3-position plug. The board also includes four TP test points. These are placed on the front edge of the board. To their right, the board has a field of twenty small metal points that are labeled IA/00. To the left of the test points, the board has two display lights. These are labeled STAT and FLT.

Other components on the IS200EHFCH2ACB include various capacitors and resistors, a CPU chip and an additional integrated circuit, and two factory-drilled holes marked E1 and E2.

","meta_title":"GE MARK VI EXCITER FAN CONTROL","meta_description":"GE MARK VI EXCITER FAN CONTROL","keywords":null,"series_page_description":"GE MARK VI EXCITER FAN CONTROL","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:21:45","prod_pdf":[]},{"id":14548,"part_number":"IS200EHPAG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC GATE PULSE AMPLIFIER BOARD","short_desc":"The IS200EHPAG1 is a GE Mark VI printed circuit board","content":"

The IS200EHPAG1 is a component for the Mark VI system. The Mark VI is part of the Speedtronic line of steam/gas turbine management systems released by General Electric.

The IS200EHPAG1 is built with a long line of LEDs located along its front edge. These light emitting diodes give a visual indication of faults, bridge temperature, cooling fan rotation, and alarm conditions. The LEDs are placed in a group of nine amber and four red, one red and one amber, and six amber and one green. The board also includes an LED strip located near the center of the board.

The IS200EHPAG1 has multiple plug connectors located on its surface. This includes six 2-position plugs located on the board’s left edge. Two additional 2-position plugs are located on the right edge. The board also has four 4-position plugs and a 6-position plug. The board has three female connectors of various sizes, as well as two CPU sockets.

The IS200EHPAG1 has six transformers located in a line toward the left side of the board edge. There are an additional two transformers located elsewhere on the board. Seventeen high-voltage electrolytic capacitors are placed in various locations, as are six heat sink components, two jumper switches, over ten transistors of various design, and metal film resistors as well as capacitors of various materials. The board has four standoffs for the addition of an optional daughter board. The board is marked with the GE logo and is factory drilled in multiple locations, including in all four corners. Manufacturer manuals or data sheets will provide more information on components and the board set up.

","meta_title":"GENERAL ELECTRIC GATE PULSE AMPLIFIER BOARD","meta_description":"GENERAL ELECTRIC GATE PULSE AMPLIFIER BOARD","keywords":"GENERAL ELECTRIC GATE PULSE AMPLIFIER BOARD","series_page_description":"GENERAL ELECTRIC GATE PULSE AMPLIFIER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 09:19:48","prod_pdf":[]},{"id":14549,"part_number":"IS200EHPAG1A","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GATE PULSE AMPLIFIER MARK VI BOARD GE","short_desc":"The IS200EHPAG1A is a GE Mark VI printed circuit board","content":"

The IS200EHPAG1A is a PCB component for GE’s Mark VI series for gas and steam turbine management. The Mark VI is one of the later systems released in the Speedtronic line, which began distribution with the MKI in 1969. The Mark VI is designed to be adaptable for use in a variety of applications and can be scaled by the number of modules used and the complexity of those modules (Simplex or redundant form.)

The IS200EHPAG1A has multiple connectors on its surface. This includes fourteen plug connectors (eight 2-position plugs, four 4-position plugs and one 6-position plug,) and three female board connectors. The board connectors are located near four standoffs designed for the attachment of an optional daughterboard. These standoffs are located in the upper right quadrant.

The IS200EHPAG1A has a total of eight transformers. Six of these are placed in a line near one edge. The board has thirteen high-voltage electrolytic capacitors of various sizes, along with capacitors made of polyester vinyl material, ceramic, and other materials. Resistors tend to be made of metal film.

Excessive heat from components on the IS200EHPAG1A is dissipated by the use of six heat sink components. Other components not already listed include over ten transistors, two CPU sockets, an LED strip, and individual LED warning lights located on the front board edge. These include 5 red, one green, and sixteen amber LEDs.

Our warehouse team will carefully pack the IS200EHPAG1A to make sure it is received at your facility damage-free. We recommend a review of manufacturer manuals for safety data and installation procedures before your new part is unboxed.

","meta_title":"GATE PULSE AMPLIFIER MARK VI BOARD GE","meta_description":"GATE PULSE AMPLIFIER MARK VI BOARD GE","keywords":null,"series_page_description":"GATE PULSE AMPLIFIER MARK VI BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-20 10:51:16","prod_pdf":[]},{"id":14550,"part_number":"IS200EISBH1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC EXCITER IN-SYNCH-BUS CARD","short_desc":"The IS200EISBH1 is a GE Mark VI printed circuit board","content":"

The IS200EISBH1 is a PCB component for the Mark VI. The Mark VI is part of the Speedtronic family of gas/steam turbine management. The Mark VI is built to as a complete protection, control and monitoring solution for turbine systems of varying size and application.

The IS200EISBH1 is an Exciter ISBus Board. This board is a special communication interface board that works within the M1, M2 and C control modules. “ISBus” is used in many GE systems, and is a high-speed proprietary communication bus. The IS200EISBH1 uses its backplane connector to receive and transmit fiber-optic feedback signals and then transmits them over the control backplane to the DSPX control.

The IS200EISBH1 is built with a narrow front faceplate. This faceplate is marked at the top with the words “GE Energy” and at the bottom with the board id number. Between these two locations, the board has seven openings. These are grouped as six large openings “Gen Field Voltage, Gen Field Current, Exciter Voltage, Exciter Current, Gnd Detect In, and Gnd Detect Out, and one small opening that is a reset button. The reset button is backed by a reset switch located on the surface of the circuit board.

The IS200EISBH1 is populated by a backplane connector. It has four factory drilled holes, one located in each corner. The board has two transformers, one relay, one transistor, over twenty integrated circuits, and many capacitors and resistors.

Our team can ship most in-stock parts the same day they are ordered. If you need your part immediately, please speak to our sales team about expedited shipping options.

","meta_title":"GENERAL ELECTRIC EXCITER IN-SYNCH-BUS CARD","meta_description":"GENERAL ELECTRIC EXCITER IN-SYNCH-BUS CARD","keywords":"GENERAL ELECTRIC EXCITER IN-SYNCH-BUS CARD","series_page_description":"GENERAL ELECTRIC EXCITER IN-SYNCH-BUS CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 12:05:13","prod_pdf":[]},{"id":14551,"part_number":"IS200EISBH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EXCITER IN-SYNCH-BUS GE MARKVI BOARD","short_desc":"The IS200EISBH1A is a GE Mark VI printed circuit board","content":"

The IS200EISBH1A is a GE printed circuit board that fits into the Mark VI series. Designed for gas and steam turbine management, the Mark VI is part of the Speedtronic line from GE. The Mark VI is built around a 13- or 21- slot VME card rack Control Module. This control module is used for control, monitoring, and protection functions. Some of these applications require backup protection.

The IS200EISBH1A is built as an Exciter ISBus card. This is a communication interface board for the M1, M2/C controllers. It provides communication between three DSPX boards that are placed (one each) in M1, M2, and C. This is a single-slot, 3U high module. It receives and transmits feedback signals through its backplane connectors.

The IS200EISBH1A is built with a faceplate that carries several components. This faceplate includes the manufacturer’s logo, the board id number, and an opening to reach a reset switch located on the surface of the circuit board. There are also six openings that are populated by the following fiber optic connectors: under Gen Field, both voltage and current; under Exciter, both voltage and current; under Gnd Detect, in and out.

The IS200EISBH1A board includes a single backplane connector. It has a factory drilled hole located in each corner of the board. The board also includes a relay, a transistor, two transformers, over twenty integrated circuits, and a variety of resistors and capacitors.

Most orders for ‘in-stock’ products made before 4 pm ship ‘same day.’ Your sales representative will be happy to quote shipping costs to your location upon request.

","meta_title":"EXCITER IN-SYNCH-BUS GE MARKVI BOARD","meta_description":"EXCITER IN-SYNCH-BUS GE MARKVI BOARD","keywords":"EXCITER IN-SYNCH-BUS GE MARKVI BOARD","series_page_description":"EXCITER IN-SYNCH-BUS GE MARKVI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 13:59:15","prod_pdf":[]},{"id":53546,"part_number":"IS200EISBH1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EISBH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","short_desc":null,"content":"

The IS200EISBH1AAA is a printed circuit board created by General Electric as part of their Mark VI gas/steam turbine control system. The Mark VI is one of several Speedtronic systems designed and released by General Electric from the 1960s onward. The Mark VI uses 13- or 21-slot VME card racks for control, protection, and monitoring. The IS200EISBH1AAA is part of the EX2100 Excitation control subset of the Mark VI.

The IS200EISBH1AAA functions as an Exciter ISBus circuit board. The board acts as a communication interface circuit card between the M1 and M2/C controllers. It is designed to provide communication for each DSPX board located in M1, M2 and C. The IS200EISBH1AAA is a single slotted 3U high board. The board uses its backplane connectors to receive and transmit feedback signals.

The IS200EISBH1AAA has a front faceplate with several integrated components. It is marked top and bottom with the GE logo and with the board id number. It has an opening to allow users to access a reset switch mounted to the board’s surface. It also has an opening populated by six fiber-optic connectors.

The IS200EISBH1AAA has one backplane connector. Factory-drilled holes have been made in each board corner. Other components include two transformers, a relay, a transistor, as well as resistors, integrated circuits, and capacitors.

Our team will make sure your in-stock order ship the same day you place your order (please order before 3 pm for same-day shipment.) We carefully pack every purchase to ensure your purchase is received in excellent condition.

","meta_title":"The GE Mark VI IS200EISBH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","meta_description":"The GE Mark VI IS200EISBH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","keywords":"["The GE Mark VI IS200EISBH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\\\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EISBH1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 14:00:17","updated_at":"2020-03-16 11:01:03","prod_pdf":[]},{"id":16097,"part_number":"IS200EISBH1AAAC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Exciter In-sync Bus Board","short_desc":"The IS200EISBH1AAAC is a GE Mark VI printed circuit board","content":"

The IS200EISBH1AAAC is a PCB component from GE that fits into their Mark VI series. The MKVI is part of General Electric’s Speedtronic gas/steam turbine management series. The MKVI is designed with either a 13- or 21- slot VME card Control Module. The control module is responsible for all monitoring, protection, and control functions for the turbine system, although some applications require backup protections. The control module can also communicate with a PC-based HMI (human machine interface) that allows all analog and digital data to be accessible in one location. This includes high-resolution time tags for events and alarms.

The IS200EISBH1AAAC functions as an Exciter ISBus card. “ISBus” is a proprietary high-speed communication bus used in many GE systems. The IS200EISBH1AAAC manages all the fiber-optic communication in the various cabinets. It does this by transmitting and receiving fiber-optic feedback signals through its backplane connector. The board accepts current and voltage signals through six fiber-optic connectors located on its front panel. These are labeled Gen Field (voltage/current,) Exciter (voltage/current) and Gnd Detect (in/out.)

The IS200EISBH1AAAC is built with a narrow front panel that includes the connectors mentioned above and one more small opening to reach a reset switch located on the surface of the circuit board. The front panel is labeled with the board id number and with the manufacturer’s logo.

The IS200EISBH1AAAC is built with two transformers (T1 and T2,)a transistor, a relay, over twenty integrated circuits, a switch, and a single backplane connector. The board carries the manufacturer’s round logo and the codes 6BA00 and 6DA00.

Is your facility experiencing an emergency outage? We will work with your courier service to get in-stock parts to you as quickly as possible to get you up and running again.

","meta_title":"Exciter In-sync Bus Board","meta_description":"Exciter In-sync Bus Board","keywords":"Exciter In-sync Bus Board","series_page_description":"Exciter In-sync Bus Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 14:18:19","prod_pdf":[]},{"id":53547,"part_number":"IS200EISBH1AAB","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EISBH1AAB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200EISBH1AAB circuit board fits into the Mark VI Speedtronic system. This is a gas/steam turbine management series that was created and originally distributed by General Electric. Speedtronic systems have been in use since the late 1960s in various iterations. The Mark VI includes Ethernet capabilities and can be built as either a Simplex or TMR (triple modular redundant) system to meet the size and complexity of the associated turbine system.

The IS200EISBH1AAB is an Exciter ISBus board that is typically used within EX2100 excitation control. This type of control uses 21- or 13-slot VME card racks control modules. The control module is designed to communicate with the Mark VI PC-based HMI, which allows the user to access data (analog and digital) in a single location, including high-resolution time tags for alarms/events.

The IS200EISBH1AAB is used to manage all fiber-optic communications within the cabinet. It uses fiber-optic feedback signals (inputs and outputs) that are transmitted through its backplane connector. The board also accepts voltage and current signals via six fiber-optic connectors that are on its front faceplate. These connectors are labeled “Gen Field,” “Exciter,” (both for voltage and current,) and “Gnd Detect.” The front faceplate is marked with the board id number and the GE Logo. It has openings to allow access to a reset switch located on the board.

Other board components include transformers, transistors, and integrated circuits. The board is marked with codes like 6DA00 and 6BA00. For more detailed information, please refer to GE manuals or user guides.

","meta_title":"The GE Mark VI IS200EISBH1AAB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200EISBH1AAB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200EISBH1AAB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EISBH1AAB is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 14:07:13","updated_at":"2020-03-16 12:58:25","prod_pdf":[]},{"id":53404,"part_number":"IS200EISBH1AAC","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200EISBH1AAC Speedtronic Turbine Control PCB board.","short_desc":null,"content":"

The IS200EISBH1AAC is a GE Mark VI circuit board. The board is typically used in EX2100 excitation modules as an Exciter ISbus board. This board is responsible for managing fiber-optic communications within its cabinet.

The IS200EISBH1AAC is built with a front faceplate that includes two set pins that lock the board into place once it has been installed in the rack system. These are marked with the board id number and with the General Electric logo. In between these, the board has an opening to access a reset switch (actually located on the board’s surface) and several fiber-optic connectors. The fiber optic connectors are labeled Gen Field voltage and current, Exciter voltage and current, and Ground Detect In and Out. The faceplate connects to the circuit board using screws.

The circuit board is marked with several codes and barcodes. It is factory-drilled along its edge in several locations. The board is also marked with the GE logo.

Components are marked with reference designators. The board has over twenty integrated circuits. It has inductor coils, resistors, capacitors, several transistors, and diodes, as well as the aforementioned reset switch. The board also has two small transformers and a single backplane connector that is used for both inputs and outputs of fiber-optic feedback signals.

For more information about the IS200EISBH1AAC circuit board, please refer to publications from General Electric, like original manuals or data sheets. If these products are no longer available to you, AX Control may be able to provide you with replacements along with your order.

","meta_title":"GE Mark VI IS200EISBH1AAC Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200EISBH1AAC Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200EISBH1AAC Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200EISBH1AAC Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2020-03-16 13:13:35","prod_pdf":[]},{"id":16120,"part_number":"IS200EMCSG1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR","short_desc":"The IS200EMCSG1 is a GE Mark VI printed circuit board","content":"

The IS200EMCSG1 is a component for the Mark VI series from GE. General Electric has had six major releases of gas and steam turbine management systems under the Speedtronic name; the Mark VI is the fifth of these. With over three decades of research behind its development, the MKVI was designed by GE turbine and controls engineering specialists to be a complete protection, monitoring, and control solution. It is based around a 13- or 21- card Control Module that executes the bulk of applications for the control of the turbine and its auxiliaries. All protection and control reside in the Control Module. This module connects to a PC-based HMI (operator interface) that allows an operator to access information from this module in one location using proprietary software like GE’s CIMPLICITY graphics. However, the HMI is a non-essential part of the control system and thus can be rebooted or replaced with processes running.

The IS200EMCSG1 is a small board with few components. It functions as a Conduction Sensor. The board has four conduction sensors (E1 through E4) located on the board. These are used to detect the presence of current in the bus. The output is a logic signal. The IS200EMCSG1 is a Hall effect conduction sensor that works with the EDEX board. This sensor is mounted in the air gap of a circular steel core attached to the board. Two independent sensor circuits (U1 and U2) are powered from separate power supplies located on the back edge of the board and use separate conduction sensors to keep them mutually exclusive.

The IS200EMCSG1 is marked with the codes CCTC, 0211, 94V0, E99006, and Type 5. It is also marked with the manufacturer’s logo and the board identification number.

","meta_title":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR","meta_description":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR","keywords":"MARK VI, GENERAL ELECTRIC, CONDUCTION SENSOR","series_page_description":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 11:57:02","prod_pdf":[]},{"id":16111,"part_number":"IS200EMCSG1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC CONDUCTION SENSOR PWA","short_desc":"The IS200EMCSG1A is a GE Mark VI printed circuit board","content":"

General Electric manufactured the IS200EMCSG1A as a component for the Mark VI system. The Mark VI is one of several gas/steam turbine management systems released by GE as part of the Speedtronic line. With decades of research behind its development, the Mark VI was created to be a complete control, protection, and monitoring solution created by GE turbine and controls engineering specialists. Based around either a 13- or 21-slot VME card rack Control Module, all protection and control functions are resident within this module. They can be accessed through the connected PC-based operator interface. This HMI (human machine interface) allows for the access of information from a single location. The use of proprietary software like GE’s Control System Toolbox and their CIMPLICITY graphics allow for optimal turbine performance.

The IS200EMCSG1A is a very small board with few components. This board is designed as a Conduction sensor and is built with four conduction sensors along its front edge. These are labeled E1 through E4. The board has two independent sensor circuits placed between E2 and E3. These are labeled U1 and U2. The board is also populated by two 6-position power supplies. These are placed along the back edge of the board. Other components on the board surface include four metal film resistors and a single ceramic capacitor.

The IS200EMCSG1A is marked with the codes Type 5, E99006, 94V0, 0211, and CCTC. The board also carries the board ID number and the round GE logo. The upper right and lower left corners of the board have been factory-drilled.

","meta_title":"GENERAL ELECTRIC CONDUCTION SENSOR PWA","meta_description":"GENERAL ELECTRIC CONDUCTION SENSOR PWA","keywords":"GENERAL ELECTRIC, CONDUCTION SENSOR PWA","series_page_description":"GENERAL ELECTRIC CONDUCTION SENSOR PWA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 13:34:27","prod_pdf":[]},{"id":16128,"part_number":"IS200EMCSG1AAB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR PWA","short_desc":"The IS200EMCSG1AAB is a GE Mark VI printed circuit board","content":"

The IS200EMCSG1AAB is a component for the Mark VI series. The Mark VI is part of the Speedtronic line of gas/steam turbine management systems developed by General Electric. The Speedtronic line has been used for turbine management since the first Mark I system was released in the late 1960s. The Mark VI includes Ethernet communications, a PC-based operator interface, and pre-loaded software that has been specifically designed for turbine control.

The IS200EMCSG1AAB is a small board with few components. It functions as a Conduction Sensor and has four conduction sensors built into the front half of the board. These components are labeled E1 to E4. The board has been drilled in two corners (bottom left and top right.) The board is marked with several codes and pieces of information, including the board ID number, the manufacturer’s logo, and the codes CCTC, 94V0, E99006, 0211, and Type5. Other components on the board include two sensor circuits (U1 and U2,) and two power supplies. These power supplies are 2 by 3 plugs. The board also includes a single ceramic capacitor and four metal film resistors.

Our team takes great care in packing your order for transit to your facility. Every item purchased from AX Control is automatically warrantied and is guaranteed to not be DOA. Your invoice or quote will have your specific product warranty information, or you can find our current warranty information on our webpage. All warranties are through AX Control and not through the manufacturer. If you have any questions, your sales representative will be happy to help.

","meta_title":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR PWA","meta_description":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR PWA","keywords":null,"series_page_description":"MARK VI GENERAL ELECTRIC CONDUCTION SENSOR PWA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-11-02 12:25:33","prod_pdf":[]},{"id":14552,"part_number":"IS200EMIOH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MAIN INPUT/OUTPUT CARD EX2100 GE MARK VI","short_desc":"The IS200EMIOH1 is a GE Mark VI printed circuit board","content":"

The IS200EMIOH1 is a PCB component designed by GE for the Speedtronic Mark VI series. When the Mark VI came into production, the Speedtronic line had a heritage of nearly thirty years in reliable gas/steam turbine management. The Mark VI built upon the framework of these earlier systems with better technology, like a Windows-based PC operator interface and Ethernet communication capabilities. The Mark VI is considered a complete monitoring, control, and protection solution for heavy-duty turbine systems of varying size and complexity.

The IS200EMIOH1 functions as the Main Input/Output Card (EX2100.) This board is designed as a double height VME style board that takes up one slot. It manages the input/output from the EACF, ECTB, EPCT, and EXTB terminal boards. Input/Output includes contact inputs, pilot trip relay drivers, output relay drivers, and PT and CT signals.

The IS200EMIOH1 is designed with a narrow front faceplate. The faceplate includes two green light emitting diodes (LEDs,) which are used as a power LED and a Status LED (IMOK.) The faceplate also carries the board number and the manufacturer’s logo.

The IS200EMIOH1 is built with two backplane connectors. The board has over seventy-five integrated circuits, including a Field Programmable Gate Array located near the center of the board. The board has over 400 hundred resistors, 400 capacitors, over 50 diodes, and thirteen transistors. The board surface is marked with the manufacturer’s logo and the board number. It is also marked 94V0 Type 6 E99006. Most components carry a number and a reference designator.

","meta_title":"MAIN INPUT/OUTPUT CARD EX2100 GE MARK VI ","meta_description":"MAIN INPUT/OUTPUT CARD EX2100 GE MARK VI ","keywords":"MAIN INPUT/OUTPUT CARD EX2100 GE MARK VI ","series_page_description":"MAIN INPUT/OUTPUT CARD EX2100 GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 08:34:26","prod_pdf":[]},{"id":14553,"part_number":"IS200EMIOH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC EX2100 MAIN I/O BOARD","short_desc":"The IS200EMIOH1A is a GE Mark VI printed circuit board","content":"

The IS200EMIOH1A is a component manufactured by General Electric for their Speedtronic Mark VI system. The Mark VI has a Control Module that takes care of most of the monitoring and control processes for the system. This is connected to a Windows-based PC HMI or operator interface that allows an operator to access information from a single point. It is worth noting this interface is a non-essential component within the control system, and thus can be replaced or reinitialized with no impact on the control system.

The IS200EMIOH1A is a Main Input/Output Card. The board is a single slot, double height VME-style board. The IS200EMIOH1A manages input/output signals like output relay drivers, contact inputs, PT and CT signals, and pilot trip relay drivers from terminal boards like the EXTB, EACF, EPCT, and EACF.

The IS200EMIOH1A has a front faceplate attached to its front edge. The faceplace has two LEDs (light emitting diodes) that are used as a Power indicator and as a Status indicator. The faceplate is marked with the manufacturer’s logo as well as with the board number.

The IS200EMIOH1A has two backplane connectors, labeled P1 and P2. The surface of the board is populated with over 400 capacitors, 400 resistors, and 50 diodes. There are several TP test points and transistors located on its surface. The board has nearly 80 integrated circuits, including a FPGA (Field Programmable Gate Array.) The surface of the board is factory-drilled at each corner. The surface is marked with the codes CCTC 0410, 94V0, Type 6, E99006.

","meta_title":"GENERAL ELECTRIC EX2100 MAIN I/O BOARD","meta_description":"GENERAL ELECTRIC EX2100 MAIN I/O BOARD","keywords":"GENERAL ELECTRIC EX2100 MAIN I/O BOARD","series_page_description":"GENERAL ELECTRIC EX2100 MAIN I/O BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-06 09:07:56","prod_pdf":[]},{"id":53517,"part_number":"IS200EMIOH1ACA","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EMIOH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200EMIOH1ACA is a board component made by General Electric as part of its Speedtronic MKVI system. The Mark VI is designed with a Control Module for monitoring and control processes. The system has a Windows-based HMI (human-machine interface) that allows operators to access data from one point. This HMI is a non-essential component that can be reinitialized or replaced with zero impact on the actual control of the system.

The IS200EMIOH1ACA is a double-height single-slot VME style board. It manages the input and output signals from several other boards, including the EXTB, EACF, ECTB, and EPCT boards. These signals include PT and CT signals, output relay drivers, contact inputs, and pilot trip relay drivers.

The IS200EMIOH1ACA has two LED indicators mounted into the front faceplate mounted to the front of the circuit board. The LEDs are used as Power and Status indicators. The faceplate has clips to keep the board secure within the rack once it is installed, and is marked with the board id number and the manufacturer’s logo.

One the back edge of the IS200EMIOH1ACA, there are two backplane connectors. These are labeled P1 and P2. The surface of the board is heavily populated with over 400 resistors, 400 capacitors, and many diodes, along with close to 80 integrated circuits. Circuits on the board include FPGAs (field-programmable gate arrays.) There are also transistors and test points on the board. The board is marked with several codes and with reference designators to allow for easy identification of components.

","meta_title":"The GE Mark VI IS200EMIOH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200EMIOH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200EMIOH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EMIOH1ACA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-03 10:22:20","updated_at":"2020-03-17 08:34:23","prod_pdf":[]},{"id":14554,"part_number":"IS200EPBPG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MARK VI EXCITER POWER BACKPLANE BOARD","short_desc":"The IS200EPBPG1 is a GE Mark VI backplane component","content":"

The IS200EPBPG1 is a PCB component for the Mark VI system. The Mark VI is part of General Electric’s popular Speedtronic series, which has been in production since the late 1960s when the first Mark I system was released. The Speedtronic systems focus during all of their development has been on improving the reliability of the management of heavy-duty gas and steam turbine systems. The Mark VI system offers an adaptable management program that can be built in Simplex or Triple Redundant form. It uses an HMI/Operator interface that is built using a PC running Windows. This HMI allows the operator to access most system data from a single location.

The IS200EPBPG1 is a Static Exciter Power Backplane. This component is designed to hold three (EPSMG1) power supply modules that will supply logic level power to controllers (M1/M2/C.) This backplane will also hold three EGDM ground detection modules. The backplane gets 125 VDC power from the EPDM board via three cable connectors. Power travels between the backplane and the EPSM board via backplane connectors.

The IS200EPBPG1 distributes power to the EBKP control backplane using cable connectors. The power is sourced from the EPSM module and is distributed as +VDC, +/-15 VDC, and +24 VDC power.

The IS200EPBPG1 will be carefully packed by our warehouse team using an anti-static wrap to protect the component from static damage during transit from our location to yours. Please refer to manufacturer manuals or data sheets for information pertaining to installation and best handling practices.

","meta_title":"GE MARK VI EXCITER POWER BACKPLANE BOARD","meta_description":"GE MARK VI EXCITER POWER BACKPLANE BOARD","keywords":"GE MARK VI EXCITER POWER BACKPLANE BOARD","series_page_description":"GE MARK VI EXCITER POWER BACKPLANE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 14:57:11","prod_pdf":[]},{"id":14555,"part_number":"IS200EPBPG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EXCITER PWR BACKPLANE GE MARK VI BOARD","short_desc":"The IS200EPBPG1A is a GE Mark VI printed circuit board","content":"

The IS200EPBPG1A is a PCB component that is designed for the Mark VI system. The Mark VI was one of the last of General Electric’s Speedtronic systems for gas/steam turbine management to be developed and commercially released. By the time of its release, GE had over thirty years of research invested into this series. The Mark VI features high reliability paired with a central Control Module that takes care of most of the monitoring, protection, and control of the turbine system. The Control Module connects to a PC-based operator interface that allows users to access most turbine data from a central location. However, since the actual control processes are not located within this interface, the PC can be replaced, upgraded, or reinitialized with zero effect to the turbine system.

The IS200EPBPG1A is designed as a Static Exciter Power Backplane. This backplane holds up to three separate EPSMG1 power supply modules that allow for logic level power to the C, M1, and M2 controllers. The backplane also holds up to three EGDM ground detection modules. This backplane distributes DC power (+5 VDC, +/- 15VDC, and +24 VDC) from the EPSM power supply to the control backplane using cable connectors.

Please follow recommended procedures for maintenance and installation of the IS200EPBPG1A. This information can be found in publications from GE like manuals or data sheets referencing the EPBP part. Our warehouse team will protect the component during transit with anti-static material. We suggest unpacking the board using a grounding strap and treating the board as a static-sensitive component at all times.

AX Control has a number of programs to help you keep your costs down. If you would like to know more about our exchange credit, repair, or warranty programs, please don’t hesitate to contact our team.

","meta_title":"EXCITER PWR BACKPLANE GE MARK VI BOARD","meta_description":"EXCITER PWR BACKPLANE GE MARK VI BOARD","keywords":"EXCITER PWR BACKPLANE GE MARK VI BOARD","series_page_description":"EXCITER PWR BACKPLANE GE MARK VI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 09:35:52","prod_pdf":[]},{"id":14842,"part_number":"IS200EPCTG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EXCITER PT/CT BOARD EX2100 MARK VI (EPCT)","short_desc":"The IS200EPCTG1 is a GE Mark VI printed circuit board","content":"

The IS200EPCTG1 is a component for the Mark VI series from GE. The Mark VI is part of the Speedtronic series for gas/steam turbine management.

The IS200EPCTG1 is an Exciter PT/CT board. It contains isolation transformers for critical generator voltage and current measurements. There are two three-phase generator PT voltage inputs and two generator CT current inputs on the board. There is also one analog input. The CT and PT input burdens are less than 1 VA. The cable length between the EPCT board and the PT may be up to 305 meters (1000 feet.) Use #12 AWG twisted shielded wire. The cable length between the EPCT board and the CT may be up to 305 meters (1000 feet.) Use #10 AWG wire.

The IS200EPCTG1 is built with three terminal strips located on the front edge of the board. Two of these (TB2/TB3) are four-position strips. The other terminal strip has twenty-four positions. The back edge of the board has three male vertical pin connectors. These are labeled J305, J308, and J315. The center of the board has four transformers in frames and two toroidal transformers connected directly to the board. The board also has six metal oxide varistors, which are located next to transformers. The board has a single jumper, twelve TP test points, and multiple capacitors and resistors.

The IS200EPCTG1 will be carefully packed by our warehouse staff, including the use of an anti-static sleeve or covering to protect the board from static discharge during transit. Please follow manufacturer procedures for installation as printed in manuals or datasheets.

","meta_title":"GE EXCITER PT/CT BOARD EX2100 MARK VI (EPCT)","meta_description":"GE EXCITER PT/CT BOARD EX2100 MARK VI (EPCT)","keywords":"GE EXCITER PT/CT BOARD EX2100 MARK VI (EPCT)","series_page_description":"GE EXCITER PT/CT BOARD EX2100 MARK VI (EPCT)","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 15:19:35","prod_pdf":[]},{"id":14843,"part_number":"IS200EPCTG1A","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CARD-EX2100 EXCITER PT/CT BOARD (EPCT)","short_desc":"The IS200EPCTG1A is a Mark VI printed circuit board","content":"

The IS200EPCTG1A is a Mark VI component manufactured by GE. The Mark VI is part of the successful Speedtronic gas/steam turbine management series from General Electric that began with the commercial release of the Mark I in 1969. Each subsequent system in the Speedtronic line since that first system’s release has improved upon the technology and design of the previous system. The Mark VI includes a Windows-based PC operator interface that includes proprietary software like CIMPLICITY graphics that is specifically designed for use with the Mark VI hardware.

The IS200EPCTG1A functions as an Exciter PT/CT board. The board includes two generator CT current inputs and two three-phase generator PT voltage inputs, as well as one analog input. The PT and CT input burdens are less than 1 VA.

The IS200EPCTG1A has three terminal blocks (strips) placed on its front edge. Two of the strips are 4-position strips, while the last is a 24-position strip. The back edge of the board is populated with three vertical pin connectors that are labeled as J305, J308, and J315. The board is also populated with two toroidal transformers and four transformers mounted into frames. The IS200EPCTG1A has twelve TP test points, one jumper switch, and resistors and capacitors of varying materials. The board is built with either one or two metal oxide varistors placed next to each of the transformers in frames. There is a total of six MOVs on the board.

Our warehouse staff will carefully pack the IS200EPCTG1A for shipment to your facility, including the use of a protective anti-static material. We recommend reviewing safety data and installation procedures in manufacturer manuals before unboxing your new part.

","meta_title":"CARD-EX2100 EXCITER PT/CT BOARD (EPCT)","meta_description":"CARD-EX2100 EXCITER PT/CT BOARD (EPCT)","keywords":null,"series_page_description":"CARD-EX2100 EXCITER PT/CT BOARD (EPCT)","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-02-21 16:22:20","prod_pdf":[]},{"id":53480,"part_number":"IS200EPCTG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The Mark VI IS200EPCTG1A is a printed circuit board created by GE. It functions as an Exciter PT/CT board. This is part of the GE Mark VI IS200 Speedtronic Series","short_desc":null,"content":"

The IS200EPCTG1AAA was manufactured by General Electric as part of its Mark VI Speedtronic system, which is designed for controlling industrial gas/steam turbines. The Speedtronic line began production in the late 1960s with the Mark I. Each Speedtronic system released since then has featured continual improvement over previous designs. The Mark VI offers Ethernet capability, a PC-based operator interface, and preloaded proprietary software like CIMPLICITY and GE Toolbox. The operator interface is a non-essential component that can be reinitialized at any time without affecting control of the system.

The IS200EPCTG1AAA is an Exciter PT/CT board. It includes 2 three-phase inputs for generator PT voltage and 2 current inputs for generator CT voltage. There is also a single analog input.

The physical design of the IS200EPCTG1AAA is as follows: it has three terminal strips placed along its front edge, including a single 24-position strip and two 4-position strips. The rear edge has three vertical pin connectors. These are labeled J315, J305, and J308. The board has 12 test points, a jumper switch, 2 toroidal transformers, 4 transformers mounted in frames, and resistors, capacitors, and metal oxide varistors (MOVs.)

For additional information regarding proper handling or installation of the IS200EPCTG1AAA, please refer back to manuals or data sheets that were provided with your OEM purchase. If these are no longer available AX Control may have duplicates available that can be included with your order. All parts shipped from our facility are carefully packaged to arrive in excellent working condition. Please let us know if you have any special requirements for shipping.

","meta_title":"The Mark VI IS200EPCTG1A is a printed circuit board created by GE. It functions as an Exciter PT/CT board. This is part of the GE Mark VI IS200 Speedtronic Series","meta_description":"The Mark VI IS200EPCTG1A is a printed circuit board created by GE. It functions as an Exciter PT/CT board. This is part of the GE Mark VI IS200 Speedtronic Series","keywords":"["The Mark VI IS200EPCTG1A is a printed circuit board created by GE. It functions as an Exciter PT\/CT board. This is part of the GE Mark VI IS200 Speedtronic Series"]","series_page_description":"The Mark VI IS200EPCTG1A is a printed circuit board created by GE. It functions as an Exciter PT/CT board. This is part of the GE Mark VI IS200 Speedtronic Series","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-02-24 09:23:02","updated_at":"2020-03-17 08:51:11","prod_pdf":[]},{"id":14844,"part_number":"IS200EPDMG1","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PWR DISTRIBUTION GE BOARD MARK VI","short_desc":"The IS200EPDMG1 is a GE Mark VI printed circuit board","content":"

The IS200EPDMG1 is a PCB component designed for the Mark VI series from GE. The Mark VI is designed as a management system for heavy-duty steam or gas turbine systems and is part of the Speedtronic line from General Electric.

The IS200EPDMG1 functions as an Exciter Power Distribution Module. Power from the IS200EPDMG1 feeds into control modules and gate amplifier boards. The EPDM board can supply power to EGPA boards (up to three,) EPSM modules (up to three,) and the EXTB board. Each of these outputs has an LED indication and an on/off isolation switch. Power in the EPDM is supplied by a 125 VDC source as well as one or sometimes two 115 VAC sources. This module is mounted on the left side of the Exciter Power Supply Rack.

The IS200EPDMG1 is built with eight individual green LEDs. The board has a total of twelve plug connectors. This includes nine 2-position plugs, one 3-position plug, and two 12-position plugs. It has a 24-position terminal board located along its front edge. The board also has seven toggle switches (previously mentioned,) polyester vinyl capacitors, and nine MOV metal oxide varistor components. The board has been drilled in all four corners. Most components are marked with reference designators. More information about the EPDM board may be found within the EX2100 User’s Guide, GE publication GEH-6632.

If you are dealing with a downtime scenario, AX Control will work with your courier service to get any in-stock part to you as quickly as possible. We also offer several Next Day air shipping options.

","meta_title":"PWR DISTRIBUTION GE BOARD MARK VI","meta_description":"PWR DISTRIBUTION GE BOARD MARK VI","keywords":"PWR DISTRIBUTION GE BOARD MARK VI","series_page_description":"PWR DISTRIBUTION GE BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-07 13:36:54","prod_pdf":[]},{"id":53563,"part_number":"IS200EPDMG1A","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EPDMG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","short_desc":null,"content":"

The IS200EPDMG1A is a board component made by GE as part of their industrial gas/steam turbine management system, the Mark VI. The MKVI is one of the last of the Speedtronic systems to be released by General Electric and was developed using research and knowledge garnered from over thirty years of experience from building other Speedtronic systems like the Mark I, Mark II and Mark IV. The MKVI has Ethernet capabilities and uses a Windows-based operator interface.

The IS200EPDMG1A acts as an Exciter Power Distribution Module within the Mark VI. This is typically used within EX2100 Excitation control. The IS200EPDMG1A can switch off any of the exciter power supply modules, as it provides power for I/O, control, and protection boards. The board is designed to mount on the side of the EPBP board and accepts 125 VDC from the station battery. It also accepts power from one or two 115 VAC supplies.

The IS200EPDMG1A has twelve female plug connectors. These include two position, three position, and twelve position plugs. The board also has two terminal blocks located in its bottom right corner. Additional components include LED indicators, MOVs, toggle switches, fuses, a jumper, and factory drilled holes ringed with a conductive material. Each corner of the board has been factory drilled. The board is marked with codes, with the board number, and with the GE logo. A fuse table is printed in one corner.

More information regarding the board and its proper installation may be found using General Electric publications like manuals.

","meta_title":"The GE Mark VI IS200EPDMG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","meta_description":"The GE Mark VI IS200EPDMG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","keywords":"["The GE Mark VI IS200EPDMG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EPDMG1A is a printed circuit board created by GE for the Mark VI series. This board is part of GE\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 08:42:33","updated_at":"2020-03-17 10:04:30","prod_pdf":[]},{"id":53564,"part_number":"IS200EPDMG1AAA","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE Mark VI IS200EPDMG1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","short_desc":null,"content":"

The IS200EPDMG1AAA module is part of the GE Mark VI Speedtronic system. The Mark VI is a gas/steam turbine management system that was part of a long line of control systems from General Electric, beginning in the late 1960s with the Mark I. The MKVI includes proprietary software loaded on a Windows-based operator interface that lets users access data from one centralized location. This HMI can be replaced or reinitialized without affecting the control of the system since it is a non-essential part of the control system.

The IS200EPDMG1AAA is an Exciter Power Distribution Module. The module is mounted on the side of another board (EPBP) and uses power from both AC supplies (one or two) and the 125 VDC station battery. The EPDM board is used to provide power to other boards within the system, including protection, I/O, and control boards. Any of the power supply modules can be turned off from this board using toggle switches mounted to the surface of the circuit board. There are seven toggles located on the board. Each one of these lines up with a two-position female plug. The board has additional plugs of varying sizes. There are also multiple fuses on the board in two lines and multiple metal oxide varistors. The board has eight LED indicators that help users recognize when the board is powered. The board has several codes and indicators on its surface and also includes a printed table on its surface with specifics on fuses.

Most boards or other products listed as “in stock” can be shipped the same day they are ordered. If you need expedited shipping, please let us know.

","meta_title":"The GE Mark VI IS200EPDMG1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","meta_description":"The GE Mark VI IS200EPDMG1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","keywords":"["The GE Mark VI IS200EPDMG1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\\\\'s speedtronic series."]","series_page_description":"The GE Mark VI IS200EPDMG1AAA is a printed circuit board created by GE for the Mark VI series. This board is part of GE\\\'s speedtronic series.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2020-03-05 08:49:20","updated_at":"2020-03-17 10:34:06","prod_pdf":[]},{"id":14845,"part_number":"IS200EPDMG1B","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DISTRIBUTION GENERAL ELECTRIC POWER CARD MK6","short_desc":"The IS200EPDMG1B is a GE Mark VI printed circuit board","content":"

The IS200EPDMG1B is a component for the Mark VI series from GE. The Mark VI is part of the Speedtronic Control Systems family of gas/steam turbine management. These systems have been used for heavy-duty turbine management since the release of the Mark I in 1969. GE engineers have spent several decades improving the reliability and design of this series as newer technology has become available to them. The Mark VI includes Ethernet communications capabilities and has a PC-based operator interface.

The IS200EPDMG1B is designed as an Exciter Power Distribution Module. Any of the exciter power supply modules can be switched off from this board. It provides power for the I/O, protection, and control boards. The IS200EPDMG1B mounts on the side of the EPBP. It accepts a 125 VDC supply from the station battery as well as either one or two 115 VAC supplies.

The IS200EPDMG1B is built with twelve plug connectors, all female. These include two 12-position plugs, one 3-position plug, and nine 2-position plugs. The board has a terminal block with two rows of twelve positions each. The board has seven toggle switches located in the center of the board. It has eight green LEDs to indicate supply power availability. The board also has nine metal oxide varistors, which are grouped together on the board in the bottom right corner.

AX Control offers shipping services through several carriers, including multiple next-day options. Most in-stock products ship ‘same day.’ Please let your sales representative know how we can best meet your shipping needs.

","meta_title":"DISTRIBUTION GENERAL ELECTRIC POWER CARD MK8","meta_description":"DISTRIBUTION GENERAL ELECTRIC POWER CARD MK9","keywords":null,"series_page_description":"DISTRIBUTION GENERAL ELECTRIC POWER CARD MK6","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2020-03-05 08:41:56","prod_pdf":[]},{"id":53405,"part_number":"IS200EPDMG1BAA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":4,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Mark VI IS200EPDMG1BAA Speedtronic Turbine Control PCB board.","short_desc":null,"content":"

The IS200EPDMG1BAA is a rectangular board component made by General Electric as part of the Mark VI gas/steam turbine control system. The Mark VI is one of several turbine control systems marketed under the Speedtronic name since the 1960s. This iteration includes Ethernet capabilities and can be built to offer Simplex or TMR (triple modular redundant) control depending on the size and complexity of the associated turbine system.

The IS200EPDMG1BAA is an Exciter Power Distribution board. The board connects to and is mounted to the side of the EPBP board. The board accepts power from two sources: a 125 VDC supply via the station battery and from a 115 VAC supply. The board then powers I/O, protection, and control boards within the system. These boards can be de-energized from the IS200EPDMG1BAA using the toggle on/off switches mounted to the surface of the board.

The IS200EPDMG1BAA is built with two terminal blocks located in the bottom corner. Other board components include multiple female plug connectors, the previously-mentioned toggle switches, and multiple fuses to protect all throughput. The board also has metal oxide varistors, capacitors, and resistors. There are eight green LED indicators lined up along one long edge of the board that will let users know when the board is energized.

For additional information about the IS200EPDMG1BAA, including important information regarding the hazards associated with handling and installing this equipment, please refer to manuals or user guides originally provided by General Electric. Only well-qualified and trained individuals should install or maintain this equipment.

","meta_title":"GE Mark VI IS200EPDMG1BAA Speedtronic Turbine Control PCB board.","meta_description":"GE Mark VI IS200EPDMG1BAA Speedtronic Turbine Control PCB board.","keywords":"["GE Mark VI IS200EPDMG1BAA Speedtronic Turbine Control PCB board."]","series_page_description":"GE Mark VI IS200EPDMG1BAA Speedtronic Turbine Control PCB board.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-11-19 14:56:42","updated_at":"2020-03-17 10:45:59","prod_pdf":[]},{"id":14914,"part_number":"IS200EPSDG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER DISTRIBUTION BOARD MARK VI","short_desc":"The IS200EPSDG1 is a GE Mark VI printed circuit board","content":"

The IS200EPSDG1 is a PCB component for the Mark VI series. The Mark VI is a system manufactured by GE for the Speedtronic series, which has been in development and release from GE since the first Mark I Speedtronic system was released in 1969. These gas and steam turbine management systems have become progressively more technologically advanced as GE integrated new breakthroughs into their next release. The Mark VI includes Ethernet communications capability and is built with a PC-based operator interface that runs proprietary software specifically designed for heavy-duty turbine systems, like CIMPLICITY and the GE Control System Toolbox.

The IS200EPSDG1 is a very small component that is designed to modify the power input path of the EPSM (Exciter Power Supply Module) to allow it to accept higher voltages. The IS200EPSDG1 is also designed to provide a fuse between the buck-regulator and the regulator power source, or DC link. The IS200EPSDG1 functions as an auxiliary or daughterboard for the EPSM card. It is built with a single backplane, and a single high voltage fuse mounted via flame resistant inline fuse holders. The board mounts to the motherboard using four screws inserted into standoffs. The screws are threaded through four factory-made holes in the EPSD board. The board is marked with the GE logo and with its board ID number.

Our team uses best shipping practices to make sure your purchase is received in the same shape that it leaves our warehouse in. We will treat the IS200EPSDG1 as a static-sensitive board and use an anti-static wrap to protect it during transit.

","meta_title":"GENERAL ELECTRIC POWER DISTRIBUTION BOARD MARK VI ","meta_description":"GENERAL ELECTRIC POWER DISTRIBUTION BOARD MARK VI ","keywords":"GENERAL ELECTRIC POWER DISTRIBUTION BOARD MARK VI ","series_page_description":"GENERAL ELECTRIC POWER DISTRIBUTION BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 08:08:41","prod_pdf":[]},{"id":14915,"part_number":"IS200EPSDG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MARK VI GE POWER DISTRIBUTION CARD PDB","short_desc":"The IS200EPSDG1A is a GE Mark VI printed circuit board","content":"

The IS200EPSDG1A is a component created by GE for the Mark VI series. The MKVI is part of General Electric’s Speedtronic steam/gas turbine management systems, which have been in production since the first Mark I system was sold in the 1960s. The Mark VI, the fifth commercially released system in the Speedtronic line, is built with a PC-based operator interface that uses a Windows platform and is preloaded with proprietary software designed for the management of heavy-duty turbine systems, such as GE Control System Toolbox and CIMPLICITY.

The IS200EPSDG1A is a small PCB component that is used to modify the input power path of the Exciter Power Supply Module (EPSM) in order to allow that board to take higher voltages. The IS200EPSDG1A also provides a fuse between the regulator power source (DC link) and the buck-regulator. This auxiliary board is designed with one backplane connector and one fuse (high voltage) mounted to the board using two flame-resistant inline fuse holders. The board has two lines of small metal components marked “1” and “2” surrounded by a box marked “P3D.” The IS200EPSDG1A connects to the motherboard (EPSM) via four screws inserted through factory-drilled holes in the EPSD into standoffs. The IS200EPSDG1A carries the board ID number, the GE logo, and several reference designators for components.

The AX Control team will use best shipping practices to ensure everything you purchase from us is received in working order. Our company guarantees products will not be DOA. If you need your purchase quickly or have other special shipping need, please let your sales representative know. Most in-stock items ship the same day. If your facility is experiencing an outage, we will do everything we can to help get the necessary part to you as quickly as possible.

","meta_title":"MARK VI GE POWER DISTRIBUTION CARD PDB","meta_description":"MARK VI GE POWER DISTRIBUTION CARD PDB","keywords":"MARK VI GE POWER DISTRIBUTION CARD PDB","series_page_description":"MARK VI GE POWER DISTRIBUTION CARD PDB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 08:18:04","prod_pdf":[]},{"id":14556,"part_number":"IS200EPSMG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EX2100 POWER SUPPLY BOARD","short_desc":"The IS200EPSMG1 is a GE Mark VI printed circuit board","content":"

The IS200EPSMG1 is an Exciter Power Supply Module manufactured by GE for their Mark VI series. The MKVI is part of the Speedtronic line of gas/steam turbine management system that has been in production by GE since the release of the MKI in 1969. The MKVI includes a PC-based operator interface, or HMI, which communicates with the main processor card in the Control Module using Ethernet connections. The operator interface allows for viewing of all analog and digital data from one location, including time tags for events and alarms.

The function of the IS200EPSMG1 is to convert 125 VDC from the EPDM into voltages required by the control system. This includes +5 VDC, +/-15 VDC, and +24 VDC.

The IS200EPSMG1 is built with a front panel that includes seven LED lights. These lights are labeled P5, P15, N15, P24A, P24B, N24B, and P70. The front panel also includes the GE logo and the board identification number.

The IS200EPSMG1 is built with several large components. This includes a transformer in a frame and a large inductor marked Bicron B9309 0912. There is also another smaller inductor coil (L2.) The board has five transistors fitted with heat sinks. These are located directly behind the front panel. The board has an additional four heat sink elements mounted to its surface.

The IS200EPSMG1 uses both high voltage electrolytic capacitors and axial electrolytic capacitors. A single disk capacitor is located in the upper right corner of the board. Other capacitors are also located on the board. The board uses both metal film and carbon composite resistors. Nine fuses are located on the board surface. Most of these are located in the left top quadrant, but fuse seven is located on the right side of the board. The board also includes several integrated circuits, TP test points, and two backplane connectors.

","meta_title":"GE EX2100 POWER SUPPLY BOARD","meta_description":"GE EX2100 POWER SUPPLY BOARD","keywords":"GE EX2100 POWER SUPPLY BOARD","series_page_description":"GE EX2100 POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 10:32:46","prod_pdf":[]},{"id":14557,"part_number":"IS200EPSMG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EX2100-POWER SUPPLY MARK VI GE","short_desc":"The IS200EPSMG1A is a Mark VI printed circuit board","content":"

The IS200EPSMG1A is a PCB component manufactured by General Electric for the Mark VI system, which is one of the later Speedtronic systems for gas/steam turbine management. The Mark VI is built with a Windows-based PC operator interface that can be used to communicate with the main processor card in the Control Module. It is important to note all control and protection resides within the Mark VI control, which means the operator interface may be reinitialized or replaced with processes running with zero impact on the control system. The operator interface allows all digital and analog data from the Mark VI to be available at one location.

The IS200EPSMG1A functions as an Exciter Power Supply Module. The job of this module is to convert power from the EPDM board (125 VDC) into the voltages required by the control system. These voltages are +5 V DC, +/-15 V DC, and +24V DC.

The IS200EPSMG1A has a wide front faceplate. This faceplate has seven LED lights located on its surface. Each light is labeled. The front panel also carries the board ID number and the manufacturer’s logo.

The IS200EPSMG1A is built with a transformer, a Bicron inductor (B9309 0912,) a smaller inductor coil at L2, and five transistors fitted into heat sinks. There are four additional heat sink components located at other locations on the board.

The IS200EPSMG1A makes use of both axial electrolytic and high-voltage electrolytic capacitors. The board also uses other capacitors, including a disc capacitor that is located on the upper right quadrant. Carbon composite and metal film resistors are both used. The board has nine fuses. Eight of these are grouped together, but the FU7 fuse is located away from the others. The board also uses integrated circuits and TP test points. The board also has two backplane board connectors.

","meta_title":"EX2100-POWER SUPPLY MARK VI GE","meta_description":"EX2100-POWER SUPPLY MARK VI GE","keywords":"EX2100-POWER SUPPLY MARK VI GE","series_page_description":"EX2100-POWER SUPPLY MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 11:08:44","prod_pdf":[]},{"id":14558,"part_number":"IS200EPSMG2","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"POWER SUPPLY EXCITER GE BOARD","short_desc":"The IS200EPSMG2 is a GE Mark VI printed circuit board","content":"

The IS200EPSMG2 is an Exciter Power Supply module created by GE for use in the Mark VI system. The MKVI is one of the last of the Speedtronic series for gas and steam turbine management created by General Electric. While the Speedtronic series has been used for turbine management since 1969, the Mark VI is significantly more advanced than those early systems, using a Windows PC as an HMI or operator interface. This operator interface includes full-color graphics (CIMPLICITY) and Ethernet capabilities.

The IS200EPSMG2 is one of two EPSM boards used in the Mark VI system. Group one modules (EPSMG1) are used in the thyristor system. The IS200EPSMG2 board is used in the regulator control. The two boards are similar, but the IS200EPSMG2 includes an EPSD daughterboard.

The IS200EPSMG2 is designed to convert the dc link voltage into the different voltages required for the EX2100 regulator control. The IS200EPSMG2 supplies +5VDC, +/- 15VDC, and +24VDC. In a simplex system, a single IS200EPSMG2 board is mounted in the ERBP backplane. In a redundant system two boards are mounted into the backplane (ERBP (M1) and ERRB,(M2/C.))

The IS200EPSMG2 is built with a faceplate with seven LED lights. The board has a Bicron inductor, a transformer, five transistors with heat sinks, and an additional inductor coil. The board has four more heat sinks located on the board. The board has nine fuses. The daughterboard (EPSD) is connected to the main board using four screws inserted into standoffs. This board includes a backplane connector.

","meta_title":"POWER SUPPLY EXCITER GE BOARD","meta_description":"POWER SUPPLY EXCITER GE BOARD","keywords":"POWER SUPPLY EXCITER GE BOARD","series_page_description":"POWER SUPPLY EXCITER GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 09:26:53","prod_pdf":[]},{"id":14559,"part_number":"IS200EPSMG2A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EXCITER POWER SUPPLY GE MARK VI","short_desc":"The IS200EPSMG2A is a GE Mark VI printed circuit board","content":"

The IS200EPSMG2A is designed as an Exciter Power Supply Module for GE’s Mark VI series. This series is a later Speedtronic system for steam or gas turbine management from General Electric. The Mark VI is built with Ethernet capabilities and has a PC-based operator interface that runs on a Windows platform. This HMI (human machine interface) allows all digital and analog data in the Mark VI to be accessed from one location. However, it is important to note the HMI is a non-essential component of the control system and thus may be replaced or reinitialized with no impact to the control system.

The Mark VI uses two versions of the EPSM card. One is used in the thyristor system (EPSMG1) and the other (EPSMG2) is used within the regulator control. The IS200EPSMG2A is similar to the EPSMG1 board but includes the addition of a daughterboard (EPSD.)

The IS200EPSMG2A converts dc link voltages into different voltages requires for the EX2100 regulator control system. Redundant systems will use two of these boards, with one mounted into the Exciter Regulator Backplane and the other mounted into the Exciter Regulator Redundant Backplane. Simplex systems only need one board. The IS200EPSMG2A supplies voltages of +5 V DC, +/- 15 V DC, and +24 V DC.

The IS200EPSMG2A has a wide front faceplate. This faceplate carries the GE logo and the board number. It is also built with seven LED lights inserted into its surface. Each of these LEDs has been labeled.

The primary board of the IS200EPSMG2A has two inductors, including a large Bicron inductor. It has five transistors equipped with heat sinks to allow for heat dissipation, four more heat sinks, nine fuses, a transformer, and multiple high-voltage electrolytic capacitors. The board has a backplane connector. The EPSD daughterboard is attached to the main board by four standoff screw mounts. The daughterboard has a backplane connector.

","meta_title":"EXCITER POWER SUPPLY GE MARK VI","meta_description":"EXCITER POWER SUPPLY GE MARK VI","keywords":"EXCITER POWER SUPPLY GE MARK VI","series_page_description":"EXCITER POWER SUPPLY GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 09:53:45","prod_pdf":[]},{"id":14560,"part_number":"IS200ERBPG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"REG GND DETECTOR MARK VI GE","short_desc":"The IS200ERBPG1 is a GE Mark VI component","content":"

The IS200ERBPG1 is a component created by GE for the Mark VI system. The Mark VI is part of the Speedtronic series and has been designed to manage steam or gas turbines. It can also function to integrate power island and balance of plant controls. The Mark VI features a central control module that connects to the rest of the system through a 13- or 21-slot VME card rack. Users can easily access data from this control module through a connected HMI (human/machine interface) that has been built upon a PC workstation running on a Windows operating system.

The IS200ERBPG1 functions as an Exciter Regulator Backplane. This component is typically used as part of GE’s EX2100 Excitation Control system, a third-generation digital excitation control system. This system is designed to work seamlessly with the original MKVI controls. It can also be used in stand-alone retrofit applications through Ethernet or serial ModBus. The exciter regulator backplane provides connectivity between all PCBs mounted within it. It connects via cable to externally supported boards and modules. It can be used in simplex or redundant applications. The IS200ERBPG1 contains boards such as the ACLA, the DSPX, the ERIO, the EPSM, the ERDD, and the IGBT board.

The cabinet of the IS200ERBPG1 is a large silver casing. The casing is open or has grills on many of its sides to allow for air flow. A fan is installed in the back of the module. More information about the IS200ERBPG1 and its associated boards can be found through GE publication GEI-100488a.

","meta_title":"REG GND DETECTOR MARK VI GE","meta_description":"REG GND DETECTOR MARK VI GE","keywords":"REG GND DETECTOR MARK VI GE","series_page_description":"REG GND DETECTOR MARK VI GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-06 15:30:31","prod_pdf":[]},{"id":14561,"part_number":"IS200ERBPG1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EX2100 REGULATOR GND DETECTOR GE MARK VI","short_desc":"The IS200ERBPG1A is a GE Mark VI component","content":"

The IS200ERBPG1A is a component manufactured by GE for the Mark VI system. Part of the Speedtronic series, the Mark VI was released in the 1990s to manage gas and steam turbine systems. It is built around a Central Control Module (13- or 21- slot VME card rack,) that connects to termination boards with box-type or barrier terminal blocks. Users may access data pulled from the control module through an interconnected operator interface (HMI) that is loaded with integrated software designed for turbine management, like GE’s CIMPLICITY graphics platform.

The IS200ERBPG1A is an Exciter Regulator Backplane (ERBP.) It is typically used within GE’s EX2100 Control System, which is a third-generation digital excitation system. This system has been designed to integrate with the Mark VI and its HMI without issues. It can also integrate with stand-alone retrofit applications using serial or Ethernet Modbus communication protocols.

The IS200ERBPG1A is designed with a large exterior rectangular casing. This is open on one side to allow insertion of various cards. Other areas are open or perforated to allow for airflow. Some edges of the casing are fitted with flanges that have factory-made holes drilled through them to allow for mounting. The module has a fan installed toward its rear surface. The ERBP provides connectivity between all of the boards mounted within it. These include boards such as IGBT, ERDD, EPSM, ERIO, DSPX, and ACLA. For a complete list of boards mounted within the unit as well as those connected via cable connectors, please reference GE publication GEI-100488a. More information on each individual board is also available.

","meta_title":"EX2100 REGULATOR GND DETECTOR GE MARK VI","meta_description":"EX2100 REGULATOR GND DETECTOR GE MARK VI","keywords":"EX2100 REGULATOR GND DETECTOR GE MARK VI","series_page_description":"EX2100 REGULATOR GND DETECTOR GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-06 16:13:23","prod_pdf":[]},{"id":53360,"part_number":"IS200ERBPG1ACA","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200ERBPG1ACA is a component for the Mark VI Speedtronic system. This board is designed with large exterior rectangular casing.","short_desc":null,"content":"

Product Description

The IS200ERBPG1ACA was a product manufactured by GE distributed as a part of the Mark VI series. As a vital portion of the Speedtronic system, the Mark VI was developed throughout the 1990s as a regulator for gas and steam-powered turbines.

The IS200ERBPG1ACA was constructed to be part of a Central Control Module (13- or 21- slot VME card rack,) which connected on termination boards including a box-type or barrier terminal blocks. Users could access data drawn from the controlling module which made use of an interrelated operator junction (HMI) loaded with cohesive software intended for superior turbine supervision, such as GE’s CIMPLICITY graphics platform.

The IS200ERBPG1ACA was an ERBP (Exciter Regulator Backplane.) It typically was used in GE’s EX2100 Control System, which was a third-generation digital excitation scheme. This system was intended to assimilate with the Mark VI and its HMI deprived of any issues. It could also fit in with a stand-alone retrofit application using an Ethernet Modbus or serial communication protocol.

The IS200ERBPG1ACS was created to have a large outward rectangular case. This was open on one side to allow for the insertion of various components and cards. Other areas on the card were perforated to allow for easy airflow. A few of the edges on the casing were fitted with flanges which had small industrial holes drilled through them allowing for easy mounting. The module had a small airflow fan installed toward the rear surface. The ERBP provided communication amongst all the boards mounted within it. These included boards such as IGBT, EPSM, ERDD, ERIO, ACLA, and DSPX.

For a comprehensive list of circuit boards connected within the product including ones mounted by means of cable connectors, please look for GE manual GEI-100488a.

","meta_title":"The GE IS200ERBPG1ACA is a component for the Mark VI Speedtronic system. This board is designed with large exterior rectangular casing.","meta_description":"The GE IS200ERBPG1ACA is a component for the Mark VI Speedtronic system. This board is designed with large exterior rectangular casing.","keywords":"["The GE IS200ERBPG1ACA is a component for the Mark VI Speedtronic system. This board is designed with large exterior rectangular casing."]","series_page_description":"The GE IS200ERBPG1ACA is a component for the Mark VI Speedtronic system. This board is designed with large exterior rectangular casing.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-08-15 15:31:32","updated_at":"2019-08-22 09:40:59","prod_pdf":[]},{"id":14562,"part_number":"IS200ERDDH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DYNAMICS DISCHARGE CARD","short_desc":"The IS200ERDDH1 is a GE Mark VI printed circuit board","content":"

The IS200ERDDH1 is a board component created by GE for the Mark VI system. The Mark VI is a platform for the management of steam or gas turbines that was released by GE as part of the Speedtronic line. This system was one of the final Speedtronic systems. It features centralized control that can be built as either a simplex or TMR (triple modular redundant) system.

The IS200ERDDH1 is part of the EX2100 Excitation Control system, which is designed to fully integrate with the Mark VI. It supports Ethernet LAN communication to the Mark VI, to the GE Control System Toolbox, and to the LS2100 Static Starter. It can also communicate with the Customer DCS through Modbus.

The IS200ERDDH1 functions as an IGBT Exciter Regulator Interface/Dynamic Discharge board. The functions of the PCB include:

It provides gate drive control to allow for field excitation.
It allows for dynamic discharge that controls excessive dc link voltage.
It provides bridge feedback, which monitors bridge temperature, dc link voltage, output field voltage, IGBT gate drive status, and output shunt current.
In simplex applications, it is designed to control the (K41) de-excitation relay.
In redundant applications, it is designed to control the (K3) charging relay.

The IS200ERDDH1 is mounted in different locations depending on the type of system it is being used in. In simplex applications, a single ERDD board is mounted in the ERBP backplane. This board interfaces with the ERIO and the ERSC exciter regulator static converter board. In redundant applications, two ERDD boards are used. One mounts in the ERBP (M1) backplane, and a second mounts in the ERRB (M2/C) backplane. A diagram of the ERDD’s application and connections in a simplex application is available in GE publication GEI-100488A.

","meta_title":"GE DYNAMICS DISCHARGE CARD","meta_description":"GE DYNAMICS DISCHARGE CARD","keywords":"GE DYNAMICS DISCHARGE CARD","series_page_description":"GE DYNAMICS DISCHARGE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-07 09:55:14","prod_pdf":[]},{"id":14563,"part_number":"IS200ERDDH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DYNAMICS DISCHARGE GE BOARD","short_desc":"The IS200ERDDH1A is a GE Mark VI printed circuit board","content":"

The IS200ERDDH1A is a PCB component for the Mark VI system from GE. The Mark VI is a Speedtronic platform designed to manage gas or steam heavy-duty turbines. This system offers centralized control in the form of a Central Control Module connected to termination boards. The Central Control Module also connects to an operator interface that allows users to access turbine data using specialized software designed to perfectly integrate with the system’s hardware, like the CIMPLICITY graphics platform.

The IS200ERDDH1A is also a component within the EX2100 third-generation digital excitation platform. This control system is designed to complement and integrate with the MKVI and its HMIs. It works with the LS2100 Static Starter. The EX2100 can be used with stand-alone retrofit applications with integration completed through serial or Ethernet Modbus.

The IS200ERDDH1A is an IGBT Exciter Regulator/Dynamic Discharge card. This board has such functions as:

In redundant applications, the IS200ERDDH1A controls the K3 charging relay.
In simplex applications, the IS200ERDDH1A controls the K41 de-excitation relay.
The IS200ERDDH1A provides bridge feedback to monitor dc link voltage and output field voltage. This also allows for monitoring of bridge temperature, output shunt current, and IGBT gate drive status.
The IS200ERDDH1A provides gate drive control for field excitation
The IS200ERDDH1A controls excessive dc link voltage through dynamic discharge.

The IS200ERDDH1A can be used in both simplex and redundant applications. However, the board mounts in different locations in these different situations. In simplex applications, the board is mounted in the ERBP backplane only. In redundant applications, two ERDD boards are used. One is mounted in the simplex location and an additional board mounts in the ERRB (M2/C) backplane. More information about this and other information about the ERDD board can be found through manuals and user guides published by General Electric.

","meta_title":"DYNAMICS DISCHARGE GE BOARD","meta_description":"DYNAMICS DISCHARGE GE BOARD","keywords":"DYNAMICS DISCHARGE GE BOARD","series_page_description":"DYNAMICS DISCHARGE GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-07 10:21:58","prod_pdf":[]},{"id":53362,"part_number":"IS200ERDDH1ABB","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":3,"stock_level_text":"In Stock Ships Today","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200ERDDH1ABB is a component for the GE Mark VI Speedtronic system. The IS200ERDDH1ABB can be used in both simplex and redundant applications.","short_desc":null,"content":"

The IS200ERDDH1ABB was a major GE PCB element designed to be for the Mark VI turbine management system. The Mark VI was a vital part of the Speedtronic platform intended to manage heavy gas or steam durable turbines. This system offered central control of the CCM (Central Control Module) which was connected to the termination boards. The CCM also connected to an O/I (operator interface) which allowed interfacers to access data regarding the turbines using dedicated software intended to flawlessly integrate within the system hardware, such as the CIMPLICITY graphics platform.

The IS200ERDDH1ABB was also an element in the third-generation digital excitation platform (EX2100). This control system was meant to accompany and integrate within MKVI and its HMIs. It worked well within the LS2100 Static Starter. The EX2100 could be used in tandem with separate retrofitted applications with incorporation finalized through serial or Ethernet Modbus.

The IS200ERDDH1ABB was an IGBT Exciter Regulator/Dynamic Discharge card.

This board had many functions including:

Controlling the K3 charging station for redundant applications.
Controlling the K41 de-excitation station, in Simplex applications,
Providing bridge feedback which helped monitor dc link and output field voltage. This feature also allowed for the monitoring of output shunt currents, bridge temperatures, and the IGBT gate drive statuses.
Providing total gate drive control for field excitation
Controlling surplus dc-link voltage by way of a dynamic discharge.

The IS200ERDDH1ABB could be used with both redundant and Simplex applications. The board mounts, however, were in different positions within these different circumstances. The Simplex applications, for example, had the board fastened in the ERBP backplane. Although, in superfluous applications, dual ERDD boards were often used.

More data about these systems or other material about the ERDD boards can be located in GE published user guides and manuals.

","meta_title":"The GE IS200ERDDH1ABB is a component for the GE Mark VI Speedtronic system. The IS200ERDDH1ABB can be used in both simplex and redundant applications.","meta_description":"The GE IS200ERDDH1ABB is a component for the GE Mark VI Speedtronic system. The IS200ERDDH1ABB can be used in both simplex and redundant applications.","keywords":"["The GE IS200ERDDH1ABB is a component for the GE Mark VI Speedtronic system. The IS200ERDDH1ABB can be used in both simplex and redundant applications."]","series_page_description":"The GE IS200ERDDH1ABB is a component for the GE Mark VI Speedtronic system. The IS200ERDDH1ABB can be used in both simplex and redundant applications.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-08-15 15:38:49","updated_at":"2019-11-02 12:27:43","prod_pdf":[]},{"id":14846,"part_number":"IS200ERGTH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GROUND DETECTOR BOARD EX2100 REG GENERAL ELECTRIC","short_desc":"The IS200ERGTH1 is a GE Mark VI printed circuit board","content":"

The IS200ERGTH1 is a PCB component for the Mark VI series. The Mark VI is part of the Speedtronic line from General Electric, which has developed a number of gas and steam turbine management systems since the late 1960s. Each of these systems builds upon and improves upon the last system with newer, faster, and more reliable technology. The Mark VI includes Ethernet capabilities and is built with a PC-based HMI or operator interface. This interface includes software designed for running heavy-duty turbine systems, like the GE Control System Toolbox. The Mark VI can be used to run turbine systems of different sizes and complexity and is available in either Simplex or Triple Redundant form.

The IS200ERGTH1 functions as an Exciter Regulator Third-party Ground Detector Terminal Board. The board is an interface between third-party ground detectors and an Exciter Regulator Options Card (EROC.) The IS200ERGTH1 provides an interface to the third-party ground detector by converting the EROC’s 9-pin connector to terminal landing screws. This board can be wall-mounted or mounted via DIN-rail.

The IS200ERGTH1 is built with the above-mentioned 9-pin connector, one capacitor (C1,) three components marked L1 through L3, and two terminal strips marked TB1 and TB2. These strips have four positions each. They are labeled (TB1): 1 Diode Monitor 2 Alarm II 24V 3 Malfunction 4 Common (TB2): 1 Chassis 2 Common 3 Alarm I 13 V and 4 Shield. The board also has four conduction sensors that are not marked. The boards are marked with several codes in one corner. The board also carries the code 6BA01.

","meta_title":"GROUND DETECTOR BOARD EX2100 REG GENERAL ELECTRIC","meta_description":"GROUND DETECTOR BOARD EX2100 REG GENERAL ELECTRIC","keywords":"GROUND DETECTOR BOARD EX2100 REG GENERAL ELECTRIC","series_page_description":"GROUND DETECTOR BOARD EX2100 REG GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 09:06:30","prod_pdf":[]},{"id":14847,"part_number":"IS200ERGTH1A","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"REG GROUND DETECTOR EX2100 GE BOARD MARK VI","short_desc":"The IS200ERGTH1A is a GE Mark VI printed circuit board","content":"

The IS200ERGTH1A is a component made for the Mark VI series. The Mark VI is one of the successful Speedtronic systems that has been manufactured and released by General Electric since the first Mark I series was released in 1969. The Mark VI series can be designed in either Simplex or Triple Redundant form. It includes an HMI/Operator interface that uses a Windows PC. Software on this operator interface includes CIMPLICITY, which has been designed for heavy duty turbines.

The IS200ERGTH1A is designed to function as an Exciter Regulator Third Party Ground Detector Terminal Card. This PCB works as an interface in-between an EROC board and third-party ground detectors. The IS200ERGTH1A can be DIN-rail mounted or wall mounted. The IS200ERGTH1A creates an interface to third party ground detectors by converting the 9-pin connector from the EROC board to terminal landing screws.

The IS200ERGTH1A has few components. It has one 9-pin connector (mentioned above,) two four-position terminal strips (TB1 and TB2,) a single capacitor, four unmarked conduction sensors, and three small components marked L1-L3. The terminal strips are labeled (from top to bottom) as follows: TB1 Common 4, Malfunction 3, Alarm II 24V 2, Diode Monitor 1, Shield 4, Alarm I 13V 3, Common 2, Chassis 1, TB2. The board has several codes, including the board ID number and the code 6BA01.

Our warehouse team will use best shipping practices to ensure your purchase will be received in the same condition as it leaves our facility. Please speak to your sales representative about all the shipping options available to you.

","meta_title":"REG GROUND DETECTOR EX2100 GE BOARD MARK VI","meta_description":"REG GROUND DETECTOR EX2100 GE BOARD MARK VI","keywords":"REG GROUND DETECTOR EX2100 GE BOARD MARK VI","series_page_description":"REG GROUND DETECTOR EX2100 GE BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 09:33:53","prod_pdf":[]},{"id":14564,"part_number":"IS200ERIOH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EXCITER MAIN BOARD MARK VI","short_desc":"The IS200ERIOH1 is a GE Mark VI printed circuit board","content":"

The IS200ERIOH1 is a component made by GE for the Mark VI system. The MKVI is part of the Speedtronic line of systems developed and released by General Electric for the management of steam or gas heavy-duty turbine systems. These systems have been in use since the release of the Mark I in 1969. The Mark VI includes Ethernet capabilities. It comes in both Simplex and triple redundant form.

The IS200ERIOH1 functions as an Exciter Regulator Input/Output board (ERIO.) This board furnishes the Input/Output interface for customer and system Input/Output in both the simplex and redundant forms of the EX2100 regulator control systems. In simplex systems, this is mounted in ERBP and interfaces customer Input/Output signals for the ECTBG2 and EPCT terminal boards. It can also interface system I/O from the ERO and ERDD boards when working within simplex systems. If placed in a redundant system, the IS200ERIOH1 is mounted to the ERBP M1 and the ERRB M2/C. One IS200ERIOH1 board is used for the M1/M2/C controllers.

The IS200ERIOH1 is built with a front faceplate with several mounted components, including a toggle switch. It has two backplane connectors located on its rear edge. The board has several hundred capacitors and resistors on its surface, as well as many integrated circuits. This includes two CPU sockets and one FPGA (field programmable gate array.) The board is marked with the GE logo, the board identification number, and with several codes. Reference designators are used on the board to mark components.

","meta_title":"GE EXCITER MAIN BOARD MARK VI ","meta_description":"GE EXCITER MAIN BOARD MARK VI ","keywords":"GE EXCITER MAIN BOARD MARK VI ","series_page_description":"GE EXCITER MAIN BOARD MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 08:22:34","prod_pdf":[]},{"id":14565,"part_number":"IS200ERIOH1A","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EXCITER MAIN_O CARD GENERAL ELECTRIC","short_desc":"The IS200ERIOH1A is a GE Mark VI printed circuit board","content":"

The IS200ERIOH1A is a component designed by GE for the Mark VI system. The Mark VI is one of General Electric’s Speedtronic gas/steam turbine management systems The Speedtronic line has been in use since the first Mark I was released in 1969. The Mark VI is the fifth of these systems and includes features like Ethernet capabilities. It is available in either Simplex or triple redundant form.

The IS200ERIOH1A works as an Exciter Regulator I/O board within the EX2100 system. The IS200ERIOH1A provides for the I/O for system and customer I/O in the EX2100 Regulator Control systems (both simplex and redundant.) However, the board mounts at different places depending on the type of system. For example, in simplex applications the board mounts in ERBP. In redundant applications, three IS200ERIOH1A are needed. These are mounted to the ERRB M2 and C, and the ERBP M1.

The IS200ERIOH1A has a double wide front faceplate with several components mounted into its surface. This includes one toggle switch component. The board has two backplane connectors (P1/P2) that are placed on its back edge. The board has two CPU sockets as well as a field programmable gate array (FPGA) for control data acquisition and storage into DPM.

The IS200ERIOH1A board surface is marked with the round GE logo. It also carries the board identification number. AX Control will treat the IS200ERIOH1A as a static-sensitive board during storage, packing, and shipment to your facility. Please review manufacturer publications like manuals for installation guidelines before receipt of your new part.

","meta_title":"EXCITER MAIN_O CARD GENERAL ELECTRIC","meta_description":"EXCITER MAIN_O CARD GENERAL ELECTRIC","keywords":null,"series_page_description":"EXCITER MAIN_O CARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-12-19 13:26:06","prod_pdf":[]},{"id":53359,"part_number":"IS200ERIOH1ACB","revision_type_id":1,"series_id":120,"stock_level_id":10,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200ERIOH1ACB is a component of the GE Mark VI system. The IS200ERIOH1ACB has a double wide face-plate with several components mounted into its surface.","short_desc":null,"content":"

Product Description

The IS200ERIOH1ACB was an element constructed by General Electric (GE) for the Mark VI turbine regulation systems. The Mark VI was specifically a Speedtronic gas/steam turbine supervision system. The Speedtronic product line was in production from 1969, when the MKI was released until the 1990s when the Mk VI was the model that halted production. The Mark VI was the fifth of these classifications and included components such as Ethernet capabilities. It was available as either the triple-redundant form or as Simplex.

The IS200ERIOH1ACB functioned as the Exciter Regulator I/O board inside the EX2100 system. The IS200ERIOH1ACB provided for the I/O for system and client I/O on the EX2100 Regulator Control system (including both Simplex and redundant.) Although, the board posted at different spaces dependent on the type of system is being used. For example, in a Simplex application the board connected in the ERBP spot. In the redundant application, three IS200ERIOH1ACB were needed. These were attached to the ERBP M1 and the ERRB M2 and C. The IS200ERIOH1ACB had a dual wide forward-facing faceplate with numerous apparatuses on the surface. This included one toggle switch component and two backplane connectors (P1/P2) that were placed on the posterior edge. The board had dual CPU sockets in addition to a FPGA (field-programmable gate array) for controlled data procurement and storage into a DPM.

The board surface was shown with a GE logo. It also carried the board ID number. AX Control will consider the IS200ERIOH1ACB to be a static-sensitive board as we store, package, and ship it to your facility. Please look over GE publications like manuals for installation procedures before receiving your new part.

","meta_title":"The GE IS200ERIOH1ACB is a component of the GE Mark VI system. The IS200ERIOH1ACB has a double wide face-plate with several components mounted into its surface.","meta_description":"The GE IS200ERIOH1ACB is a component of the GE Mark VI system. The IS200ERIOH1ACB has a double wide face-plate with several components mounted into its surface.","keywords":null,"series_page_description":"The GE IS200ERIOH1ACB is a component of the GE Mark VI system. The IS200ERIOH1ACB has a double wide face-plate with several components mounted into its surface.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-08-15 15:21:03","updated_at":"2019-12-19 13:26:17","prod_pdf":[]},{"id":14566,"part_number":"IS200EROCH1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE EXCITER REGULATOR OPTIONS CD","short_desc":"The IS200EROCH1 is a GE Mark VI printed circuit board","content":"

The IS200EROCH1 is a PCB component for the Mark VI system from General Electric. The MKVI is one of the many Speedtronic gas and steam turbine management systems released by GE since the release of the Mark I in 1969. These systems have become progressively more advanced as technology has been added by GE engineers. The Mark VI includes a Windows-based PC operator interface that runs proprietary software designed for the management of heavy duty turbines, like CIMPLICITY. The operator interface/HMI allows the user to access most data from one location, but since processes are actually run within the Control Module and not the HMI, this interface can be rebooted or replaced without any effect on the system.

The IS200EROCH1 functions as an Exciter Regulator Options Card The IS200EROCH1 provides support for the regulator options such as keypad support, terminal board power connection, and GE and third-party ground detectors. It supports a single third-party detector with up to three inputs, including a diode fault monitor, a ground detector malfunction, and a ground alarm input. The IS200EROCH1 is designed to communicate with a keypad using RS-232C and then provides data transmission to two locations on the regulator rack. A connector for the keypad is located on the EROC faceplate with another located on the backplane.

The IS200EROCH1 is built with a front faceplate with seven components including a keypad connector. The board has two backplane connectors, one CPU socket, four high-voltage electrolytic capacitors as well as capacitors of other materials, and multiple integrated circuits.

","meta_title":"GE EXCITER REGULATOR OPTIONS CD","meta_description":"GE EXCITER REGULATOR OPTIONS CD","keywords":"GE EXCITER REGULATOR OPTIONS CD","series_page_description":"GE EXCITER REGULATOR OPTIONS CD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-11 08:31:46","prod_pdf":[]},{"id":14567,"part_number":"IS200EROCH1A","revision_type_id":1,"series_id":120,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EXCITER REGULATOR OPTIONS CARD GE MARK VI","short_desc":"The IS200EROCH1A is a GE Mark VI printed circuit board","content":"

The IS200EROCH1A is a component for the GE Mark VI series. Part of the Speedtronic line, the MKVI is an advanced system for the management of heavy-duty gas or steam turbine systems of various size and complexity. The Speedtronic line has been used to manage turbine systems since the Mark I was developed and released in 1969. The Mark VI is the fifth of these systems to be commercially released and includes such features as a PC-based HMI or operator interface that runs on a Windows platform. This HMI uses specially-designed software like CIMPLICITY graphics for the management of turbine systems.

The IS200EROCH1A is designed as an Exciter Regulator Options Board/Card (EROC.) This board is designed to provide support for a terminal board power connection, for regulator options, and for third-party and GE ground detectors. The GE ground detector uses the EROC board to find leakage resistance to ground at any point in the generator field circuit. The IS200EROCH1A can provide transmission of data to two locations on the regulator rack and can communicate using a keypad attached with an RS-232 cable. A connector for the keypad is situated on the IS200EROCH1A faceplate. There is another keypad connector located on the board’s backplane.

The IS200EROCH1A has two backplane connectors, four high-voltage electrolytic capacitors, and one CPU socket. The board has multiple integrated circuits. The front faceplate includes several connectors and components.

If you are experiencing a downtime scenario, please let our staff know so we can work with your courier service or expedite your shipment in other ways to minimize your outage. Most of our in-stock products can ship the same day they are ordered.

","meta_title":"EXCITER REGULATOR OPTIONS CARD GE MARK VI","meta_description":"EXCITER REGULATOR OPTIONS CARD GE MARK VI","keywords":null,"series_page_description":"EXCITER REGULATOR OPTIONS CARD GE MARK VI","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-10-10 16:13:12","prod_pdf":[]},{"id":53363,"part_number":"IS200EROCH1ADD","revision_type_id":1,"series_id":120,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":null,"weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"The GE IS200EROCH1ADD is a component for the GE Mark VI Speedtronic Series. The IS200EROCH1ADD is designed as an Exciter Regulator Options Card (EROC). This board is designed to proved support for a terminal board power connection.","short_desc":null,"content":"

The IS200EROCH1ADD was a circuit module created by GE for the series MkVI. Included in the Speedtronic product line, the MKVI is was a cutting-edge system designed for the complex management of robust gas and steam turbine structures of a variety of sizes and complexities. The Speedtronic line developed the MKI system in 1969 to help with the day-to-day management of intricate turbine systems. The Mark VI was the fifth in the line of these systems to be released commercially and included features such as a PC-based HMI or client interface which ran on a Windows Systems platform. This HMI used specifically conceived software such as CIMPLICITY graphics for running the turbine systems.

The IS200EROCH1ADD was fabricated to be an EROC (Exciter Regulator Options Card/Board.) This card was designed to deliver support for regulator options, terminal board power connections, and for third-party ground detectors. The GE ground detector used the EROC board to find outflow resistance to being grounded at any position on the generator field circuit path. The IS200EROCH1ADD provided the transmission of information to two different locations on the regulatory rack and could communicate using a keypad mounted with an RS-232 cable. A connection for the keypad was located on the IS200EROCH1ADD faceplate. There was another keypad connection positioned on the board’s backplane.

The IS200EROCH1ADD had four high-voltage electrolytic capacitors and one CPU socket. The card had numerous integrated circuits. The forward-facing faceplate included quite a few connections and components.

If you are undergoing a downtime situation, please communicate with our staff so we can attempt to work with your carrier or expedite your delivery to minimalize your outage. The majority of our products which are in-stock can ship the day they are requested.

","meta_title":"The GE IS200EROCH1ADD is a component for the GE Mark VI Speedtronic Series. The IS200EROCH1ADD is designed as an Exciter Regulator Options Card (EROC). This board is designed to proved support for a terminal board power connection.","meta_description":"The GE IS200EROCH1ADD is a component for the GE Mark VI Speedtronic Series. The IS200EROCH1ADD is designed as an Exciter Regulator Options Card (EROC). This board is designed to proved support for a terminal board power connection.","keywords":"["The GE IS200EROCH1ADD is a component for the GE Mark VI Speedtronic Series. The IS200EROCH1ADD is designed as an Exciter Regulator Options Card (EROC). This board is designed to proved support for a terminal board power connection."]","series_page_description":"The GE IS200EROCH1ADD is a component for the GE Mark VI Speedtronic Series. The IS200EROCH1ADD is designed as an Exciter Regulator Options Card (EROC). This board is designed to proved support for a terminal board power connection.","quote_description":null,"inventory_notes":null,"cross_reference":null,"created_at":"2019-08-15 15:41:33","updated_at":"2019-08-22 09:52:49","prod_pdf":[]},{"id":14568,"part_number":"IS200EROCHI","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC EXCITER REG OPTIONS BOARD","short_desc":"The IS200EROCHI is a GE Mark VI printed circuit board","content":"

The IS200EROCHI is a PCB component created by GE for the Mark VI system. The MKVI was one of the last of GE’s Speedtronic systems for gas or steam turbine control. The Speedtronic line began in the late 1960s and continued production through the 1990s and into the new century. These systems focused on integrating hardware and software and creating management programs that would minimize downtime through efficient use of technology, often by utilizing redundant backups on critical controls.

The IS200EROCHI is an Exciter Regulator Options Card. This component is used in the EX2100 Excitation Control System, which is used in both new and retrofit gas, steam or hydro turbine systems. The EX2100 is available in several configurations in order to fit the needs of both full static and regulator control.

The IS200EROCHI is used to support regulator options that already exist within the system. This includes keypad support, terminal board power connections, along with ground detectors (both third party and GE provided.) These third party detectors can have up to three inputs, such as Diode Fault Monitor, Ground Alarm Input, and Ground Detector Malfunction.

The IS200EROCHI is designed to communicate with the system keypad using RS-232C communications. There are two keypad connectors located on the board; this includes one on the board’s faceplate and another on the backplane. These two locations are designed to allow for different variations of mounting; only one keypad may be connected to the module at any time.

Technical support for the IS200EROCHI was provided by GE. More information on this board and its components can be found in user guides and manuals.

","meta_title":"GENERAL ELECTRIC EXCITER REG OPTIONS BOARD","meta_description":"GENERAL ELECTRIC EXCITER REG OPTIONS BOARD","keywords":"GENERAL ELECTRIC EXCITER REG OPTIONS BOARD","series_page_description":"GENERAL ELECTRIC EXCITER REG OPTIONS BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-18 13:44:21","prod_pdf":[]},{"id":14569,"part_number":"IS200EROCHIA","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"EXCITER REGULATER OPTIONS GE MARK VI BOARD","short_desc":"The IS200EROCHIA is a GE Mark VI printed circuit board","content":"

The IS200EROCHIA is a board component manufactured by General Electric for the Mark VI. This system was one of the final Speedtronic systems for gas and steam turbine management. The Speedtronic line began with the Mark I in 1969 and continued production through the 1990s with the Mark VI and Mark VIe. The Mark VI meets ISO 9001 codes and standards and ISO 9000-3 Quality Mgt and Quality Assurance standards.

The IS200EROCHIA functions as an Exciter Regulator Options board (EROC.) This board is part of the EX2100 control system. This is a third generation digital excitation control system with software and hardware designed to coordinate and integrate with other Mark VI modules and parts, like its Integrated Control System (ICS,) human-machine interface (HMI,) and LS2100 Static Starter.

The IS200EROCHIA is designed to provide support for regulator options like the terminal board power connections, keypad support, and ground detectors (GE and third-party.) Third party ground detectors are supported with three inputs, such as a Ground Alarms Input, a Ground Detector Malfunction, or a Diode Fault Monitor.

The IS200EROCHIA uses RS-232C communications to interact with the system keypad. While there are two keypads located on the board (these are located on the faceplate and on the backplane) these locations are only to allow for different mounting variations; please note only a single keypad can connect to the board at any given time.

The IS200EROCHIA received technical support from the original manufacturer. This board is now considered an obsolete product. However, user guides, data sheets, and manuals that reference the IS200EROCHIA part will help the user with installation and maintenance.

","meta_title":"EXCITER REGULATER OPTIONS GE MARK VI BOARD","meta_description":"EXCITER REGULATER OPTIONS GE MARK VI BOARD","keywords":"EXCITER REGULATER OPTIONS GE MARK VI BOARD","series_page_description":"EXCITER REGULATER OPTIONS GE MARK VI BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-01-18 14:33:03","prod_pdf":[]},{"id":14570,"part_number":"IS200ERRBG1","revision_type_id":1,"series_id":120,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC M2/C BACKPLANE BOARD","short_desc":"The IS200ERRBG1 is a GE Mark VI component","content":"

The IS200ERRBG1 is a manufactured part created by GE to fit into the Mark VI system. This system, which was rele