Product Description
The IS200SCTLG1A by General Electric or GE is a device called a static charge control board. This is a type of PCB or printed circuit board created as a part of the Mark VI series. The Mark VI and the rest of the Mark lineup are used in the automation and control of gas and steam turbines.
The IS200SCTLG1A circuit board is fairly large and square with many various electronic components. Two (2) large capacitors which are solid blue have been paired together in the lower right corner of the IS200SCTLG1A. One (1) more blue capacitor that is smaller than the other two is positioned at the upper edge of the IS200SCTLG1A. These two (2) capacitors are placed vertically on the surface of the IS200SCTLG1A. Two (2) solid white capacitors are situated on the left half of the IS200SCTLG1A in different areas. Both of these capacitors have a voltage of six-hundred (600) volts. Three (3) mid-sized yellow capacitors are placed near the center of the IS200SCTLG1A along with three (3) solid green capacitors. Many very small yellow capacitors may be seen all over the IS200SCTLG1A board. Three (3) black components labeled as DN are aligned horizontally next to these capacitors. Five (5) more of these black components have been placed above these near the center of the IS200SCTLG1A. The IS200SCTLG1A contains two (2) blue potentiometers or variable resistors. These devices contain small metal knobs that may be used to adjust the resistance. Two (2) more potentiometers which are green are positioned in the center of the right edge of the PCB.