The IS200TSVCH1A, from General Electric, is a Mark VI printed circuit board designed to function as a Servo terminal board. This is one of several turbine-specific terminal boards available from GE as part of the Mark VI or Mark VIe Speedtronic system. These I/O modules offer a direct interface to field devices. This helps to reduce or eliminate much of the instrumentation that used to be needed. Such reductions considerably simplify long-term maintenance and remove points of failure from the system. It also enables direct diagnostics for the direct monitoring of field devices. This board typically works along with a PSVOH1A pack.
The IS200TSVCH1A is a removable barrier-type terminal block board. The circuit board has 2-coil outputs, 2 channels, and 2 pulse rate inputs. The board offers 8 LVDTs.
The IS200TSVCH1A is populated with two lines of vertical connectors along the top of the board. There are additional connectors toward the bottom right side of the board near one small terminal connector. Two additional vertical connectors are located on the left side of the board. Additionally, the board has two terminal strips located along the bottom of the board.
The IS200TSVCH1A is marked with the GE logo and with the board ID number. Additionally, the board carries reference designations so the user can easily identify individual components.
The IS200TSVCH1A terminal board weighs approximately 1.00 pounds before our team prepares it for shipping. We will ensure it arrives in the same working order it leaves our hands. If you are local to us and would like to arrange for local pickup, talk to our team about this option.