IS200STAIH2A

About the IS200STAIH2A

Greater Product Series Information

The IS200STAIH2A is a device which is called a DINrail TRBD ANLGIO board. This is a type of printed circuit board or PCB. The IS200STAIH2A is one of the components in the Mark VI series.

Mark VI and the other Mark series make up the Mark line by General Electric or GE. Mark products have been used for the automation and management of gas and steam turbines. Industrial turbines have been managed by Mark series since the introduction of the Mark I in 1969.

Hardware Tips and Specifications

The IS200STAIH2A is a large printed circuit board which is in the shape of a square. A large plastic terminal block which is green is positioned at the bottom edge of the IS200STAIH2A. Contained within this terminal block is a collection of forty-eight terminals.

Twenty-four (24) of these are lined up on the top row and the other twenty-four (24) are positioned on the bottom. The IS200STAIH2A contains ten (10) transistors which are arranged in a horizontal line in the middle of the PCB. These transistors are black and formed in a half-circle shape.

Two (2) red jumpers are sitting between every pair of transistors. These jumpers are used to connect two (2) jumper pins to alter the IS200STAIH2A’s operations.

The IS200STAIH2A has many different jumper pins that are made out of silver or gold metal. Most of these are situated among the transistors but four (4) of the jumper pins are arranged together in a line near the top right corner of the PCB next to a group of four (4) potentiometers or variable resistors.