IS200ICBDH1A

Product Description

The IS200ICBDH1A is a General Electric Printed Circuit Board. This board is no longer being supported by GE and may now be difficult to find. AX Control does try to keep the IS200ICBDH1A in stock as a refurbished or new surplus board.

The IS200ICBDH1A is made up of many different components. There are 10 diodes, 61 capacitors, 95 resistors, 3 transformers, 15 integrated circuits, an inductor coil, and a fuse. There is an RS-232 9-pin port and four ethernet jacks that are labeled J11A, J11B, J12A, and J12B. There is a circular 8-pin female port. There is also a black 40-pin, a black 10-pin, a 26-pin black connection. In between these two connections is a white 9-pin male port. There are also three 96-pin female ports that are white. There are 4 stab-on connections that are labeled CCOM1, CCOM2, CHAS2, and CHAS1. On the four corners of the board are factory drilled holes used for mounting purposes and two terminal screws that wiring can connect to. The label for this board is on the left side close to the fuse.  

The IS200ICBDH1A has the ability to connect to a small metal chassis that can then be mounted to other PCBs. Two flat head screws can be used to attach this board to the chassis.

For more information, please consult the datasheets, user guides, and instruction manuals put out by GE. Only a trained professional should attempt to install this board into a system. Because of the nature of the product, please be sure to maintain antistatic procedures when installing this card.