IS200STCIH6ADD

Product Description

The IS200STCIH6ADD is a DIN Rail Contact Terminal PCB. It was originally created by GE for the Mark VI series of turbine control systems.

The IS200STCIH6ADD is made up of many different types of components. On the bottom right and left corners on the board, there are two factory drilled terminal holes that have been reinforced. There are also two large drilled holes on the left and right sides that are a little above the center of the board edges. There are two green terminal strips on the bottom of the board that has been numerically labeled. The bottom strip is labeled 2-52 and are evenly numbered. The top terminal strip is oddly numbered 1-51. On the top edge of the board, there is a 37-pin RS-232 female port. The board’s part number is on the bottom right side of the card. The board also has a 3-pin jack connection that is white and located a little above the top terminal strip. This card also has 91 resistors, 24 capacitors, 27 diodes, 2 transistors, and 23 integrated circuits.

Because the IS200STCIH6ADD is a PCB, it should always be handled with care. To prevent any type of damage due to a buildup and release of static electricity, it is imperative that the board be kept in antistatic packaging until it is ready to be installed. Once it can be installed be sure to wear an antistatic wristband. Also, to help with the installation process, it is advisable to make a note of the positions of the wires and cables from the original board the new board is replacing.