About the IS200HFPAG2ADC
The IS200HFPAG2ADC functions as a High-frequency AC/Fan Power Supply Supply board. Since this is a multi-purpose board, it can be installed within different cabinets in various locations of the drive system. The board is usually mounted near a board rack or a fan enclosure. The board receives either ac or dc input voltage and then converts it into output voltages such as square wave, or square wave used to power circuitry that has been isolated from high voltage. The board receives voltage input through four stab-on connectors. The output of voltage is through eight plug connectors. The IS200HFPAG2ADC is built with four fuses to protect the board circuitry. It also has a single MOV, or metal oxide varistor, that also protects circuitry. The board has:
- two heat sinks
- two transformers
- two LEDs (light-emitting diodes,) transistors
- three high voltage capacitors
IS200HFPAG2ADC Troubleshooting
If you have questions, please reach out to our team today--we’ll be happy to answer them! This IS200HFPAG2ADC High Frequency Power Supply Board device is actually not the originally-developed device of its specific GE Mark VI Series functional product role, as that would have to be deemed the IS200HFPAG2 High Frequency Power Supply Board notably not making use of this IS200HFPAG2ADC High Frequency Power Supply Board device's significant three-fold product revision history. A number of important IS200HFPAG2ADC High Frequency Power Supply Board hardware characteristics are listed in table form in the IS200HFPAG2ADC High Frequency Power Supply Board instructional manuals attached above for your convenience of research. For example, this IS200HFPAG2ADC High Frequency Power Supply Board device makes use of two toal LED indicators, which specifically include the:
- DS1 that is activated when a 17.7/19.1 V ac output is functioning normally
- DS2 that is activated when the 48/52 V ac/dc output is functioning correctly
