IS200ISRJG1A

Product Description

The IS200ISRJG1A is an RJ45 Adapter created by General Electric. This part is no longer being mass-produced by GE and is now discontinued. It may be a little difficult to find now, but AX Control still makes every attempt to keep the IS200ISRJG1A in stock.

The IS200ISRJG1A is a very small printed circuit board. It has two ethernet connections, two yellow ceramic capacitors, and two terminals labeled E1 and E2. There is a 10-pin P12 plug in between the two ethernet jacks. There are also two factory drilled holes on the top left and bottom right sides of the board. These holes can be used in conjunction with standoffs to help mount the board onto a larger board.  An RJ45 is an 8-pin jack that is normally used to connect a device to an Ethernet-based LAN (local area network).

For more information about this board, please refer to the datasheets, user guides, and instruction manuals produced by GE for the IS200ISRJG1A. Only a trained professional should attempt to install the IS200ISRJG1A. Because the IS200ISRJG1A is a printed circuit board, it is recommended that antistatic procedures be taken while handling and installing this board. An antistatic wristband should be worn to ensure that when installing this board, static is not generated and discharged. Static shock has the ability to cause serious damage to delicate circuitry.

Please contact AX Control directly for more information about the availability of the IS200ISRJG1A, its pricing, and all of the shipping options available for this part.