{"isEnabled":true,"series":{"id":74,"manufacturer_id":2,"name":"Drive Boards","page_name":"drive-boards","description":"

In Stock
Ships Today
1-800-991-7026

International
1-919-372-8413

We carry a large inventory of various Reliance Electric Drive Boards, many of which are new in the original manufacturers box. These obsolete products are available at the lowest prices, with the shortest lead time, and the longest warranty in the industry. We have a variety of Reliance Electric Drive Board that will match you automation needs.

","content":null,"meta_title":"Reliance Electric Drive Boards In Stock. Cards Driver Circuit Boards. New Avaiable","meta_description":"Reliance Electric Drive Boards In Stock. Cards Driver Circuit Boards. New Avaiable","keywords":"Reliance Electric Drive Boards In Stock. Cards Driver Circuit Boards. New Avaiable","display_order":10,"is_active":1,"created_at":null,"updated_at":null,"product_type_id":null,"manufacturer":{"id":2,"name":"Reliance Electric","page_name":"reliance-electric","logo":"57c435.jpg","description":"","content":null,"meta_title":"Reliance Electric PLC In Stock! Automax Automate DC3 DC2 Minpak Flexpak SP500 New and Reman","meta_description":"Reliance Electric PLC In Stock! Automax Automate DC3 DC2 Minpak Flexpak SP500","keywords":"Reliance Electric PLC In Stock! Automax Automate DC3 DC2 Minpak Flexpak SP500","display_order":4,"is_active":1,"created_at":null,"updated_at":null},"images":[{"id":687,"series_id":74,"image_id":42459,"image_type_id":3,"name":"Reliance%20Drive%20Board%201.jpg","is_active":1,"created_at":null,"updated_at":null}]},"products":[{"id":9268,"part_number":"0-419437-B","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric AutoMax Interface Board","short_desc":null,"content":"

0-419437-B Reliance Electric AutoMax Interface Board

The 0-419437-B is a Reliance Electric circuit board fabricated as part of Reliance drive systems, primarily the Automax system. This board functions as a PC Interface board. It has been discontinued by the manufacturer.

The 0-419437-B includes a front faceplate attached to the circuit board portion of the module. The faceplate has two fiber-optic ports mounted in its lower half. Above these, there are two LED indicators mounted in this panel. These LEDs, which includes one red and one green LED, are used to indicate board status.

The surface of the 0-419437-B is populated by three microprocessor chips and over a dozen other integrated circuits. It has a single transformer component, transistors, a switch component and resistors, capacitors, and diodes. The switch has six individual toggles that can be set to different positions. The board also has a conductive tab extending from its top edge that functions as a sort of backplane connector.

For additional information on proper installation and operation, or for a detailed troubleshooting guide, please refer to technical support publications that were originally provided with your OEM purchase. If you can no longer locate these manuals, user guides, or data sheets, the team here at AX Control will be happy to help with replacements as we can. Talk to your sales representative about this option when you place your order.

AX Control maintains an on-hand inventory of new surplus and reconditioned industrial automation parts from manufacturers like Fuji, Parker, Eurotherm, and GE. If you are unable to locate the part you need in our online catalog, please talk to our team today. We are happy to help.

","meta_title":"Reliance Electric AutoMax Interface Board","meta_description":"Reliance Electric AutoMax Interface Board","keywords":"Reliance Electric AutoMax Interface Board","series_page_description":"Reliance Electric AutoMax Interface Board","quote_description":null,"inventory_notes":"","cross_reference":"57C445","created_at":null,"updated_at":"2019-05-01 16:04:26","prod_pdf":[{"id":92,"product_id":9268,"pdf_id":15533,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15533,"pdf_type_id":1,"file_name":"0-419437-B.pdf","title_tag":"Reliance Electric AutoMax Interface Board","alt_tag":"Reliance Electric AutoMax Interface Board","created_at":null,"updated_at":null}}]},{"id":8881,"part_number":"0-48652","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Assembly","short_desc":null,"content":"

The 0-48652 is Speed controller from Reliance. This controller has seven dials on the front of the controller. Each dial goes from zero to ten. The dial at the left corner is labeled Full Auto Ratio, the top right is labeled Full Auto Balance, the second dial on the left is labeled Man MAX Spd., The second dial on the right is labeled Zero Set, the third left knob is labeled Max Spd., there is a place on the third right that doesn’t have a knob, the fourth knob on the left is labeled Full Auto Max SPD, the last knob on the right is labeled Tach Auto Max. Spd. Each knob is adjustable independently of the others. At the base of the controller has the following labeled, 457CC1, B/M 22527-15TB. This controller is a long card that slides into place. This speed controller has a metal cage like brace at the back of the controller. This controller utilizes many small parts such as diodes, resistors, capacitors, and connective wires. Some of these components are attached directly to the circuit board, while others are attached with small wires to elevated metal pins that raise the component above the wiring that snakes over the surface of the circuit board. This speed controller will just slide into place and is secured by two screws on the front of the faceplate (one on top and one on the bottom).

The staff at AX Control is available to help you via email or over the phone.

","meta_title":"PC Board Assembly","meta_description":"PC Board Assembly","keywords":"PC Board Assembly","series_page_description":"PC Board Assembly","quote_description":null,"inventory_notes":"","cross_reference":"(103779-69R) ( 797751-R) (27101-4R) (103779-69-R)","created_at":null,"updated_at":"2019-03-21 11:06:53","prod_pdf":[{"id":87,"product_id":8881,"pdf_id":15534,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15534,"pdf_type_id":1,"file_name":"0-48652.pdf","title_tag":"PC Board Assembly","alt_tag":"PC Board Assembly","created_at":null,"updated_at":null}}]},{"id":9056,"part_number":"0-48652-30","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Calibration Meter Board","short_desc":null,"content":"

The 0-48652-30 is a Calibration Meter Board created by Reliance Electric. The 0-48652-30 has a front panel that has four variable resistor knobs coming through. The top variable resistor knob is labeled CRAWL SPD REF., and the knob has the numbers zero through ten on it. The second variable resistor knob is labeled CURRENT COMP. and the knob has the numbers zero through ten on it. The third variable resistor knob is labeled MAX. SPD. and the knob has the numbers zero through ten on it. The fourth variable resistor knob is labeled SLACK TAKE UP and the knob has the numbers zero through ten on it. The circuit board has another small variable resistor on it with only a small screw to adjust it. The 0-48652-30 has well over one hundred metal pins (each pin has a small circle around the base and a customized label for what that pin is used for). These metal pins are used as relays to connect various components to the circuit board without having to make traces or having to solder the parts. All that must be done is to wrap the wire from the piece around the pegs. Between the sections of metal pins are also positive and negatively labeled arrows. There are four places for integrated circuits on the bottom right side. There is also two radial ceramic capacitors and a carbon composition resistor that are connected directly to the circuit board.

For a quote contact the friendly staff at AX Control today.

","meta_title":"Calibration Meter Board","meta_description":"Calibration Meter Board","keywords":"Calibration Meter Board","series_page_description":"Calibration Meter Board","quote_description":null,"inventory_notes":"","cross_reference":"109072-023r","created_at":null,"updated_at":"2019-04-08 12:05:35","prod_pdf":[{"id":88,"product_id":9056,"pdf_id":15535,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15535,"pdf_type_id":1,"file_name":"0-48652-30.pdf","title_tag":"Calibration Meter Board","alt_tag":"Calibration Meter Board","created_at":null,"updated_at":null}}]},{"id":9058,"part_number":"0-48652-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board","short_desc":null,"content":"

The 0-48652-4 is a printed circuit board made by Reliance Electric. The front of this board has the option for four knobs. It comes with three already installed. They are labeled LIMIT 1, LIMIT 2, and JOG. Each knob has a black dial with white markings and is labeled zero through ten. These knobs are known as variable resistors and are adjustable independently of each other. At the top and bottom of this front panel is two silver cylindrical piece. These are used to secure the 0-48652-4 into place and only need to be hand tightened. The circuit board section that is connected to this front panel has over eighty metal tabs. These metal tabs are used to secure various components to the circuit board, such as diodes, resistors, capacitors, or lengths of wires. These pieces simply wrap around one of the metal tabs and the other end wraps around a second metal tab (usually directly across from the first metal tab). This manner of part installation is super simple and allows for the circuit board to be completely customized to exactly what you need it for, with absolutely no need to solder anything at all. The metal tabs are set up in straight lines down the width of the board and have markings to let the engineer know where the positive and negative ends of each component should be placed.

AX Control offers great prices and fast easy shipping. We even offer expedited shipping to get you your part fast.

The 0-48652-5 is a Scaling AC Tach Drive Board produced by Reliance Electric. The tach board has seventy-four metal spikes across the surface of the board. Each metal spike is a labeled with either just the alphabet, a letter from the alphabet and a number or just a number. The circuit board features two fusible resistors, six light blue cermet film resistors, and four thick film resistors. The 0-48652-5 board also has two orange polyester capacitors and two large silver polystyrene capacitors. There is also a series of wires that snake across the surface of the 0-48652-5 and connect to the various metal spikes. The front of the Scaling AC Tach Drive Board has three variable resistors with the option for a fourth should you find it necessary. The first variable resistor is labeled LINE 1 and the dial is labeled with the numbers zero through ten with small hash marks in between each large printed number. The second variable resistor is labeled LINE 2 and the dial is labeled with the numbers zero through ten with small hash marks in between each large printed number. There is an open space to add another variable resistor. The final installed variable resistor is labeled JOG and the dial is labeled with the numbers zero through ten with small hash marks in between each large printed number. The 0-48652-5 card secures into place using two screws that anchor the top and bottom of the front panel.

Call AX Control of a great price and fast shipping.

","meta_title":"Scaling AC Tach Drive Board","meta_description":"Scaling AC Tach Drive Board","keywords":"Scaling AC Tach Drive Board","series_page_description":"Scaling AC Tach Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 12:20:46","prod_pdf":[{"id":85,"product_id":9057,"pdf_id":15537,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15537,"pdf_type_id":1,"file_name":"0-48652-5.pdf","title_tag":"Scaling AC Tach Drive Board","alt_tag":"Scaling AC Tach Drive Board","created_at":null,"updated_at":null}}]},{"id":8882,"part_number":"0-48653-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Tachometer Control Circuit Board","short_desc":null,"content":"

The 0-48653-3 module is a tachometer scaling circuit board that was designed and mass produced by the company Reliance Electric. The 0-48653-3 circuit board is an old, obsolete circuit board that has since been discontinued by Reliance Electric. However, the 0-48653-3 circuit board may be in stock with AX Control either in refurbished condition or brand new from some of the surplus stock. Call or email an AX Control sales representative today to learn more about the availability of this product.

The 0-48653-3 tachometer scaling circuit board is a very small circuit board. In each corner of the 0-48653-3 circuit board, there is a very small screw that is used to help with securing the 0-48653-3 circuit board in a proper way. There are three resistors on the circuit board. There is a resistor that is labeled as the “1R” resistor, and that is mounted directly onto the circuit board. The other two resistors, which are labeled as the “2R” and “3R” resistors are instead quick connect resistors that are wired to posts. In the middle of the 0-48653-3 tachometer circuit board, there is a large yellow capacitor. This has multiple lines of labels on it, including “2.0 MFD +/-20%” and “600 VDC 126” on the bottom of the capacitor.

The 0-48653-3 tachometer scaling circuit board weighs approximately 0.22 lbs. or 0.10 kg. This total weight does not include any of AX Control’s safe and reliable packaging materials, which are designed to ensure that your package reaches your facility without any damage whatsoever.

","meta_title":"Tachometer Control Circuit Board","meta_description":"Tachometer Control Circuit Board","keywords":"Tachometer Control Circuit Board","series_page_description":"Tachometer Control Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-03 12:24:04","prod_pdf":[{"id":3191,"product_id":8882,"pdf_id":14206,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14206,"pdf_type_id":1,"file_name":"0-48653-3.pdf","title_tag":"Tachometer Control Circuit Board | PDF","alt_tag":"Tachometer Control Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":9059,"part_number":"0-48653-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Tach Board","short_desc":null,"content":"

The 0-48653-4 unit is a tachometer control circuit board that Reliance Electric designed and produced. If you are looking to purchase a 0-48653-4 board, then please be sure to contact us either over the phone or through email. We typically keep the 0-48653-4 board in stock, even though it is no longer supported or offered new through Reliance Electric. Our sales representatives can help you in determining if this product is the right one for your facility.

The 0-48653-4 board is small and has only a few parts located on its surface. At the top of the 0-48653-4 board, there is a small terminal block with four terminals on top. Below that, you will find three small resistors. The two resistors on the left are wired to metal prongs. These prongs are labeled as “A” and “B” for the resistor most on the left and “C” and “D” for the resistor to the right of that one. The resistor that is the third resistor is wired directly to the board rather than to two metal prongs. Below these three resistors, you will find a large cylindrical capacitor, which is rated as being 600 VDC and 2 μf.

The 0-48653-4 board has an approximate total weight of 0.25 lbs. or 0.11 kg. Please be aware, however, that the approximate total weight that we have provided does not serve as a reflection of any added packaging materials that we provide as a means of housing all of the shipments that go directly to our customers.

","meta_title":"PC Tach Board","meta_description":"PC Tach Board","keywords":"PC Tach Board","series_page_description":"PC Tach Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-20 08:15:36","prod_pdf":[{"id":86,"product_id":9059,"pdf_id":15538,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15538,"pdf_type_id":1,"file_name":"0-48653-4.pdf","title_tag":"PC Tach Board","alt_tag":"PC Tach Board","created_at":null,"updated_at":null}}]},{"id":16300,"part_number":"0-48664-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC VOLTAGE TRANSDUCTOR W/10SCREW TERMINAL CONNECTION","short_desc":null,"content":"

0-48664-2 Reliance Electric Voltage Transductor

The 0-48664-2 is a board component from Reliance. This board is no longer manufactured but was originally created for use within the company’s drives.

The 0-48664-2 functions as a Voltage Transdructor board. Unlike many boards in this series, it has no connected faceplate or any kind of extractor clip attached. The board is built with a ten-position terminal strip located along its leading edge. Most of these terminals are individually labeled. The center of the board is populated by a larger transformer component mounted in a frame that is screw-mounted to the board’s surface. This is marked TR-11805 69000-34-R. Several colored wires connect the transformer to the board, including red, orange, green, brown, and yellow wires.

Other board components include integrated circuits, polyester vinyl capacitors, diodes, metal film resistors, transistors, ceramic capacitors, disk capacitors, and short point-to-point surface wires. The surface of the board has been printed with a grid pattern. Most components are not marked with any type of reference designator but may be marked with their manufacturer part number.

Publications like data sheets, product manuals, or user guides will provide more detailed information about this board, including installation and troubleshooting guidelines. It is possible these publications will be available on sites by Baldor-Reliance, Reliance Electric, or ABB.

AX Control offers new surplus and reconditioned products from manufacturers like GE, Fuji, Parker, Horner, and Eurotherm, all on-hand and ready to ship from our warehouse located in central North Carolina. Call today for your personalized quote.

","meta_title":"RELIANCE ELECTRIC VOLTAGE TRANSDUCTOR W/10SCREW TERMINAL CONNECTION","meta_description":"RELIANCE ELECTRIC VOLTAGE TRANSDUCTOR W/10SCREW TERMINAL CONNECTION","keywords":"RELIANCE ELECTRIC VOLTAGE TRANSDUCTOR W/10SCREW TERMINAL CONNECTION","series_page_description":"RELIANCE ELECTRIC VOLTAGE TRANSDUCTOR W/10SCREW TERMINAL CONNECTION","quote_description":null,"inventory_notes":"new has box","cross_reference":"","created_at":null,"updated_at":"2019-04-30 13:08:11","prod_pdf":[]},{"id":18479,"part_number":"0-48672","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC DRIVE BOARD","short_desc":null,"content":"

The 0-48672 is a driver board made by Reliance Electric. The 0-48672 features a grid pattern on its surface. The short edge or “X” axis is marked with letters of the alphabet A through Z and then the letters double up AA through AZ and then BA through BE. The long edge or the “Y” axis is marked using numbers starting at zero and going to one hundred and fifteen. Only the numbers in increments of five are written but there are tick marks to represent the remaining numbers. The 0-48672 has eight transformers on the left edge of the card. To the left of each resistor is a carbon composition resistor for a total of eight. Above all of the transformers is another carbon composition resistor and a large silver polystyrene capacitor. On the right of the transformers are eight more carbon composition resistors than a line of four silver transistors and four black transistors. Then the 0-48672 has four integrated circuits place above rows of carbon composition resistors (five resistors in each row). To the right of these are four small eight medium and four large polypropylene capacitors. These capacitors show how much energy they can hold with the markings on the outside of each one. The card then has four teal, eight black, four red, and then twelve more teal fusible resistors. The 0-48672 then becomes less organized and has a series of twelve resistors, six transistors, two integrated circuits and three capacitors randomly placed on the far right.

","meta_title":"RELIANCE ELECTRIC DRIVE BOARD","meta_description":"RELIANCE ELECTRIC DRIVE BOARD","keywords":"RELIANCE ELECTRIC DRIVE BOARD","series_page_description":"RELIANCE ELECTRIC DRIVE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-23 14:09:39","prod_pdf":[]},{"id":8883,"part_number":"0-48673","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Regulator Card","short_desc":null,"content":"

The 0-48673 is a PC Regulator Card circuit board created by Reliance Electric. The regulator circuit board has a grid pattern across the surface of it. Along the short edge of the circuit board is it labeled with the alphabet (A, B, C, D etc..), and along the long edge of the circuit board, it is labeled numerically starting at zero and increasing by increments of five to one hundred and fifteen. Along the long edge of the circuit board from just after number fifty to one hundred are a series of metal tabs that are used to connect various wires using an attachment that is connected to the wire and slides onto the metal tab. Each of the metal tabs has its own alphanumeric (letters and numbers) identifier. On the opposite long side of the circuit board is a long-raised metal row with thirty-one screws on top. Each individual section has a numerical label. This is used to connect the circuit board into the system by allowing various connections to be made, using the screws to secure the connections. Across the grid-like surface, each piece is strategically placed for the best results. The circuit board uses multiple sized and types of capacitors to regulate and store energy for the circuit board as well as three transformers to move energy between multiple circuits.

Reach out to the talented staff at AX Control by phone or email to receive additional information regarding this Regulator card, including a price and shipping options.

","meta_title":"Reliance Regulator Card","meta_description":"Reliance Regulator Card","keywords":"Reliance Regulator Card","series_page_description":"Reliance Regulator Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-21 11:49:41","prod_pdf":[{"id":82,"product_id":8883,"pdf_id":15539,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15539,"pdf_type_id":1,"file_name":"0-48673.pdf","title_tag":"Reliance Regulator Card","alt_tag":"Reliance Regulator Card","created_at":null,"updated_at":null}}]},{"id":8884,"part_number":"0-48673-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Driver Board","short_desc":null,"content":"

The 0-48673-1 is a PC Regulator Card circuit board created by Reliance Electric. The regulator circuit board has a grid pattern across the surface of it. Across the grid-like surface, each piece is strategically placed for the best results. The circuit board uses various sized and types of condensers to regulate and store energy for the circuit board as well as three transformers to move energy between multiple circuits. Along the long edge of the circuit board from numbers ten to twenty and just after number fifty to one hundred are a series of metal tabs that are used to connect various wires using an attachment that is connected to the wire and slides onto the metal tab. Each of the metal tabs has its own alphanumeric (letters and numbers) identifier. On the opposite long side of the circuit board is a long-raised metal row with thirty-one screws on top. Each individual section has a numerical label. This is used to connect the circuit board into the system by allowing various connections to be made, using the screws to secure the connections. Along the short edge of the circuit board is it labeled with the alphabet (A, B, C, D etc..), and along the long edge of the circuit board it is labeled numerically starting at zero and increasing by increments of five to one hundred and fifteen.

Reach out to the talented staff at AX Control by phone or email to receive additional information regarding this Regulator card, including a price and shipping options.

","meta_title":"Driver Board","meta_description":"Driver Board","keywords":"Driver Board","series_page_description":"Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-21 11:55:54","prod_pdf":[{"id":83,"product_id":8884,"pdf_id":15540,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15540,"pdf_type_id":1,"file_name":"0-48673-1.pdf","title_tag":"Driver Board","alt_tag":"Driver Board","created_at":null,"updated_at":null}}]},{"id":18037,"part_number":"0-48680-116","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC GP200 REGULATOR CARD","short_desc":null,"content":"

The 0-48680-116 is a GP200 REGULATOR CARD manufactured by Reliance Electric. The 0-48680-116 is a large card with twenty-seven various sized integrated circuits. These are the components that control or regulate the circuit boards functions. The 0-48680-116 has an oval crystal oscillator. There is a large enclosed transformer in one corner and near the transformer on the circuit board, it is marked HIGH VOLTAGE. There are several clusters of jumper pins around the circuit board, that act as electric switches when cover or uncovered. These pins are customizable to what the engineer would like to have done. The 0-48680-116 card has two plug-in female connectors, a three-port female connector with screws and a nineteen-port female connector with screws. The 0-48680-116 also uses twelve other male connectors with an array of metal pins in each to connect things to the circuit board. The regulator card has eight holes throughout the surface to use in order to secure the circuit board. The 0-48680-116 card also has a large number of surface mounted multilayer ceramic capacitors and surface mounted resistors. The surface mounted resistors or SMD and the ceramic tile capacitors are very small and are placed around the larger components in tight clusters. The clusters can be so tight that the green circuit board cannot be seen through them. Learn additional details about the 0-48680-116 by using Reliance Electric’s service manuals and informational data sheets.

If you would like to purchase the 0-48680-116 you can message or call the staff of AX Control.

","meta_title":"RELIANCE ELECTRIC GP200 REGULATOR CARD","meta_description":"RELIANCE ELECTRIC GP200 REGULATOR CARD","keywords":"RELIANCE ELECTRIC GP200 REGULATOR CARD","series_page_description":"RELIANCE ELECTRIC GP200 REGULATOR CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-18 11:27:01","prod_pdf":[]},{"id":16361,"part_number":"0-48680-117","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC REGULATOR BOARD GP 2000","short_desc":null,"content":"

The 0-48680-117 is a GP2000 regulator card created by Reliance Electric. The 0-48680-117 card is eight inches long and four inches wide. Around the perimeter of the 0-48680-117 are a series of connection terminals. There are twelve male style connection terminals and a long orange female standard style terminal block with twenty openings. The 0-48680-117 also has two female connection terminals closer to the center of the card. The regulator card has three microcontrollers and twenty-five integrated circuits that are used to regulate and control the duties of the 0-48680-117 card. These pieces hold various amounts of information that is used to control the card. The 0-48680-117 has two larger relays on the lower right corner of the circuit board. These relays have a DANGER sticker on them that reads: Danger 230 VAC, 1A MAX, T2 20, 21, 22. The surface of the 0-48680-117 card is covered with tiny ceramic capacitors and SMD style surface mounted resistors. These tiny parts fill in most of the space between the larger components. There is a crystal oscillator in the center of the regulator card. The 0-48680-117 also has four large holes in the center of the card and a small black peg in the center of some of the drilled holes. These holes can be used with pegs to support a daughter board or to make the 0-48680-117 a daughter board for a larger card.

Allow AX Control to assist with any questions you may have in regards to our products or services.

","meta_title":"RELIANCE ELECTRIC REGULATOR BOARD GP 2000","meta_description":"RELIANCE ELECTRIC REGULATOR BOARD GP 2000","keywords":"RELIANCE ELECTRIC REGULATOR BOARD GP 2000","series_page_description":"RELIANCE ELECTRIC REGULATOR BOARD GP 2000","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-12 10:55:54","prod_pdf":[]},{"id":17985,"part_number":"0-48680-118","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC REGULATOR PC BOARD","short_desc":null,"content":"

The 0-48680-118 is a regulator circuit board that used to be produced by Reliance Electric. The 0-48680-118 has twelve individual male connection terminals around the edges for the circuit board, along with two female connection terminals near the center of the board. The 0-48680-118 also has a large standard female terminal block that is bright orange, and a small black standard female terminal block. The 0-48680-118 regulator card uses fourteen integrated circuits and microcontrollers to regulate the performance of the card. These components contain all the data and information that makes the card function at ay given time. The 0-48680-118 features a series of jumper pins around the circuit board that has green caps. There is an encapsulated transformer in a corner of the circuit board covered with a DANGER sticker that pertains to the transformer and the black standard female terminal block. The 0-48680-118 regulator card is covered with hundreds of SDM (surface mounted resistors) and multilayer chip ceramic surface mounted capacitors. These pieces get rid of (resistors) or stores (capacitors) energy as directed by the fourteen integrated circuits. The 0-48680-118’s bright orange standard female terminal block also has wires placed in each port that connect with white connection harness. The 0-48680-118 is extensively labeled with what each part is and how many are on the card albeit in very tiny writing. The card also has the part number (0-48680-118), the maker (Reliance Electric) and where it was made (Japan) printed on it.

AX Control is here to help.

","meta_title":"RELIANCE ELECTRIC REGULATOR PC BOARD","meta_description":"RELIANCE ELECTRIC REGULATOR PC BOARD","keywords":"RELIANCE ELECTRIC REGULATOR PC BOARD","series_page_description":"RELIANCE ELECTRIC REGULATOR PC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-18 08:37:00","prod_pdf":[]},{"id":17961,"part_number":"0-48680-211","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC POWER SUPPLY BASE DRIVER GP2000 460VAC","short_desc":null,"content":"

The 0-48680-211 is a POWER SUPPLY BASE DRIVER GP2000 460VAC circuit board formally made by Reliance Electric. The 0-48680-211 has two huge PCB mount electrolytic capacitors and twenty other PCB mount electrolytic capacitors of a wide range of other sizes. The 0-48680-211 driver has ten small half circle style transistors. The 0-48680-211 supply card has twelve different points to attach things to the circuit board. One the left edge there are two separate points with three metal pins each. Along the bottom are four encased connection points, the first one has seven pins, the second has four metal pins, the third has six pins, and the fourth has nine metal pins. Then there is an exposed two prong connector. On the right edge, there are three exposed two metal prong connectors. On the top edge, there is an exposed six prong connector and another exposed two prong connector. The remainder of the 0-48680-211 power supply base driver is littered with a large array of pale colored fixed resistors with striped markings, an assortment of pale blue fusible style resistors, and varistor resistors. The 0-48680-211 also has a small induction coil and three large white block style towers. Near the induction coil, the circuit board is labeled “HIGH VOLTAGE”. The 0-48680-211 card also uses eleven variously sized integrated circuits. There is also a very large transformer along one edge of the circuit board with a series of multi-colored wires attached to it.

For more detailed information reach out to AX Control.

","meta_title":"RELIANCE ELECTRIC POWER SUPPLY BASE DRIVER GP2000 460VAC","meta_description":"RELIANCE ELECTRIC POWER SUPPLY BASE DRIVER GP2000 460VAC","keywords":"RELIANCE ELECTRIC POWER SUPPLY BASE DRIVER GP2000 460VAC","series_page_description":"RELIANCE ELECTRIC POWER SUPPLY BASE DRIVER GP2000 460VAC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-17 15:26:39","prod_pdf":[]},{"id":16956,"part_number":"0-48680-319","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC SERIAL COMM PORT CARD GP20","short_desc":"","content":null,"meta_title":"RELIANCE ELECTRIC SERIAL COMM PORT CARD GP20","meta_description":"RELIANCE ELECTRIC SERIAL COMM PORT CARD GP20","keywords":"RELIANCE ELECTRIC SERIAL COMM PORT CARD GP20","series_page_description":"RELIANCE ELECTRIC SERIAL COMM PORT CARD GP20","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":16362,"part_number":"0-48680-526","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":3,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC SNUBBER","short_desc":null,"content":"

The 0-48680-526 module is a Reliance Electric branded transistor snubber card. At AX Control, we are always on the lookout for rare products such as the 0-48680-526 snubber card. If you are interested in getting a 0-48680-526 snubber card yourself, then look no further than AX Control. To get a direct confirmation on the 0-48680-526 snubber card’s availability in our stock, you can give us a call with the phone number 1-919-372-8413 or send us an email with the email address sales@axcontrol.com. Our sales representatives are trained to be able to answer any of the questions you may have about the 0-48680-526 snubber card or any of the other products that are listed on the AX Control website.

The 0-48680-526 snubber card is a small component with a select few electrical parts. There is one small polypropylene capacitor and another polypropylene capacitor that is significantly larger than the first one. In addition to that, the 0-48680-526 snubber card has one large black resistor. Lastly, there is a small metal tab that can be used for a variety of functions.

The 0-48680-526 snubber card weighs just about 1.00 lbs. or 0.45 kg. Keep in mind, however, that this total does not include any of the packaging materials that we here at AX Control use to house the shipments we send out. These packaging materials are specially designed to keep your package safe from the many bumps, falls, or any other similar mishaps that can regularly occur during the shipping and handling process.

","meta_title":"RELIANCE ELECTRIC SNUBBER","meta_description":"RELIANCE ELECTRIC SNUBBER","keywords":"RELIANCE ELECTRIC SNUBBER","series_page_description":"RELIANCE ELECTRIC SNUBBER","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-11 13:23:05","prod_pdf":[]},{"id":9060,"part_number":"0-49005","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CardPak PC Board","short_desc":"","content":null,"meta_title":"CardPak PC Board","meta_description":"CardPak PC Board","keywords":"CardPak PC Board","series_page_description":"CardPak PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":84,"product_id":9060,"pdf_id":15541,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15541,"pdf_type_id":1,"file_name":"0-49005.pdf","title_tag":"CardPak PC Board","alt_tag":"CardPak PC Board","created_at":null,"updated_at":null}}]},{"id":8885,"part_number":"0-49005-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Linear PC Board","short_desc":"","content":null,"meta_title":"Linear PC Board","meta_description":"Linear PC Board","keywords":"Linear PC Board","series_page_description":"Linear PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":80,"product_id":8885,"pdf_id":15542,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15542,"pdf_type_id":1,"file_name":"0-49005-1.pdf","title_tag":"Linear PC Board","alt_tag":"Linear PC Board","created_at":null,"updated_at":null}}]},{"id":9061,"part_number":"0-49005-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CardPak Linear Voltage PC Board","short_desc":"","content":null,"meta_title":"CardPak Linear Voltage PC Board","meta_description":"CardPak Linear Voltage PC Board","keywords":"CardPak Linear Voltage PC Board","series_page_description":"CardPak Linear Voltage PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":81,"product_id":9061,"pdf_id":15543,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15543,"pdf_type_id":1,"file_name":"0-49005-4.pdf","title_tag":"CardPak Linear Voltage PC Board","alt_tag":"CardPak Linear Voltage PC Board","created_at":null,"updated_at":null}}]},{"id":9062,"part_number":"0-49005-5","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CardPak Linear Voltage PC Board","short_desc":"","content":null,"meta_title":"CardPak Linear Voltage PC Board","meta_description":"CardPak Linear Voltage PC Board","keywords":"CardPak Linear Voltage PC Board","series_page_description":"CardPak Linear Voltage PC Board","quote_description":null,"inventory_notes":"needs mounting screw and side cover has crack","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":79,"product_id":9062,"pdf_id":15544,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15544,"pdf_type_id":1,"file_name":"0-49005-5.pdf","title_tag":"CardPak Linear Voltage PC Board","alt_tag":"CardPak Linear Voltage PC Board","created_at":null,"updated_at":null}}]},{"id":17766,"part_number":"0-49017-83","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE POWER SUPPLY","short_desc":null,"content":"

The 0-49017-83 unit was created and manufactured by Reliance Electric to serve as a CardPak Summing Circuit. The 0-49017-83 summing circuit has been discontinued by Reliance Electric and is now considered an obsolete product; however, we here at AX Control tend to have this product in stock. If you are in need of the 0-49017-83 summing circuit, then please do not hesitate to give us a call. Our sales representatives can assist you with any questions or concerns, including telling you the availability of this product and whether or not it is the right machine for your facility.

The 0-49017-83 summing circuit is device has the appearance of a large rectangular box. At the very top of the device, you will find its control panel. There, you will find two dials. Both of these dials have positions which range from 0 to 10. The dial on the top has the text “50-75% SPEED” written directly below it. The bottom dial, instead, has the text “50 RPM” written directly above it. In the middle of the top of the device, you can see the text “SUMMING CIRCUIT” in black along with the device’s product number printed directly below it. The “CARDPAK” logo is printed directly at the top.

The 0-49017-83 summing circuit has a total weight of approximately 10.00 lbs. or 4.54 kg. This approximate total does not take into account any of the packaging materials that we use to furnish the shipments that we send out to our customers, and they are meant to protect your purchased product from any damages.

","meta_title":"RELIANCE POWER SUPPLY","meta_description":"RELIANCE POWER SUPPLY","keywords":"RELIANCE POWER SUPPLY","series_page_description":"RELIANCE POWER SUPPLY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-20 10:54:14","prod_pdf":[]},{"id":8886,"part_number":"0-49046","revision_type_id":1,"series_id":74,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Cardpak Amplifier","short_desc":"","content":null,"meta_title":"Cardpak Amplifier","meta_description":"Cardpak Amplifier","keywords":"Cardpak Amplifier","series_page_description":"Cardpak Amplifier","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3190,"product_id":8886,"pdf_id":14210,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14210,"pdf_type_id":1,"file_name":"0-49046.pdf","title_tag":"Cardpak Amplifier | PDF","alt_tag":"Cardpak Amplifier | PDF","created_at":null,"updated_at":null}}]},{"id":9065,"part_number":"0-51377","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Circuit Board","short_desc":"","content":null,"meta_title":"Reliance Electric Circuit Board","meta_description":"Reliance Electric Circuit Board","keywords":"Reliance Electric Circuit Board","series_page_description":"Reliance Electric Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":77,"product_id":9065,"pdf_id":15545,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15545,"pdf_type_id":1,"file_name":"0-51377.pdf","title_tag":"Reliance Electric Circuit Board","alt_tag":"Reliance Electric Circuit Board","created_at":null,"updated_at":null}}]},{"id":9063,"part_number":"0-51377-10","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"3-Slot PCB Rack Board","short_desc":"","content":null,"meta_title":"3-Slot PCB Rack Board","meta_description":"3-Slot PCB Rack Board","keywords":"3-Slot PCB Rack Board","series_page_description":"3-Slot PCB Rack Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":78,"product_id":9063,"pdf_id":15546,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15546,"pdf_type_id":1,"file_name":"0-51377-10.pdf","title_tag":"3-Slot PCB Rack Board","alt_tag":"3-Slot PCB Rack Board","created_at":null,"updated_at":null}}]},{"id":9070,"part_number":"0-51377-17","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GTS Drive Motherboard","short_desc":null,"content":"

The 0-51377-17 is created by Reliance Electric. The 0-51377-17 has six long black plastic connection areas. The 0-51377-17 has eight metal points on the left edge labeled from top to bottom as 166 (GRN), 66 (WHT), 57 (BLK), 161, 71, 61, 60, and 62. There are six more metal points just to the right labeled from top to bottom as 4, 13, 31, 18, H, and HI. Then there is the first black connector. There are six more metal points than the second black connector. To the right of the second black connector is six more metal points labeled from top to bottom as 194, 193, 193, 192, X1, and X2. Then there is the third black connector. To the right of the third connector is twelve more metal points labeled from top to bottom as 6 (W), 6 (R), 2(W), 2(R), 4(W), 4(R), 1(W), 1(R), 5(W), 5(R), 3(W), and 3(R). Then there is the fourth black connector, and none more metal points. These points from top to bottom are labeled 919, 119, 819, 719, 619, 28, 20, 326, 157. The fifth black connector is next with four more metal points labeled 519, 419, 1519, and 157, and the sixth and final black connector. On the right edge of the circuit board are twenty-four more metal points labeled from top to bottom as 257, 1519, 157, 319, 751, 651, 151, 251, 351, 451, 551, 126, 141, 344, 36, 57, 71, 56, 57, 71, 119, 919, 119, 57, 219. There is also a long black piece along the bottom with thirty metal screws in it.

","meta_title":"GTS Drive Motherboard","meta_description":"GTS Drive Motherboard","keywords":"GTS Drive Motherboard","series_page_description":"GTS Drive Motherboard","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 09:42:41","prod_pdf":[{"id":75,"product_id":9070,"pdf_id":15547,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15547,"pdf_type_id":1,"file_name":"0-51377-17.pdf","title_tag":"GTS Drive Motherboard","alt_tag":"GTS Drive Motherboard","created_at":null,"updated_at":null}}]},{"id":16618,"part_number":"0-51377-24","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC REG RACK INTERCONNECT BOARD MAXPAK","short_desc":"","content":null,"meta_title":"RELIANCE ELECTRIC REG RACK INTERCONNECT BOARD MAXPAK","meta_description":"RELIANCE ELECTRIC REG RACK INTERCONNECT BOARD MAXPAK","keywords":"RELIANCE ELECTRIC REG RACK INTERCONNECT BOARD MAXPAK","series_page_description":"RELIANCE ELECTRIC REG RACK INTERCONNECT BOARD MAXPAK","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":9064,"part_number":"0-51377-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"5-Slot PCB Circuit Board","short_desc":null,"content":"

The 0-51377-3 is a five-slot printed circuit board by Reliance Electric. This circuit board is small. As the name implies there are five long connection slots on this board. The 0-51377-3 has six small pins on the far left with wires connected to each pin. In between the first and second slot are a cluster of five metal tabs with wires connected to each tab. In between the second and the third slot are three more metal tabs labeled X2, X3, and X0. In between the third and fourth slot are five black wires of different lengths connected to the board. In between the fourth and fifth slot are eight more sections of black wires attached to the board. On the other side of the fifth slot is a cluster of ten or more metal pins with a variety of wires connected to them. There are also twelve metal tabs on the far-right edge. These tabs are color-coded between red and white and also have labels 1 THY, 2THY, 3THY, 4THY, 5THY, and 6THY. The “THY” labels are placed in between two metal tabs the top pin is labeled for a red wire and the bottom pin is labeled for a white wire. There are four large holes to secure the 0-51377-3 into place. There are also ten smaller holes one on each end of the five connection slots. These holes are used to secure each of the connecting terminals to the circuit board.

Contact AX Control’s skilled staff to get yours today.

","meta_title":"5-Slot PCB Circuit Board","meta_description":"5-Slot PCB Circuit Board","keywords":"5-Slot PCB Circuit Board","series_page_description":"5-Slot PCB Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 08:14:35","prod_pdf":[{"id":76,"product_id":9064,"pdf_id":15548,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15548,"pdf_type_id":1,"file_name":"0-51377-3.pdf","title_tag":"5-Slot PCB Circuit Board","alt_tag":"5-Slot PCB Circuit Board","created_at":null,"updated_at":null}}]},{"id":8887,"part_number":"0-51377-35","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Printed Master Connection Board","short_desc":null,"content":"

Reliance is the maker of the 0-51377-35 master connection circuit board. The circuit board has five long female pin style connectors. They are labeled from left to right TSTD, VSDA, VSAA, DC GA, CLSA. There are a numerous amount of metal pins around the circuit boards perimeter. On the left there are twelve pins labeled from top to bottom is thirty-two, thirty-one, thirty-three, one hundred and twelve, one hundred and nine, one hundred and ten, one hundred and eleven, one hundred and fourteen, twenty-eight, three hundred and twenty-six, seven, and three hundred and sixty-seven. There are twenty-seven pins on the right side labeled from top to bottom twenty-three, five hundred and sixteen, twenty-two, seventy-one, fifty-six, fifty-seven, SNUBBER, ON SIGNAL, -12VA, -6.3VA, 0VA, +6.3VA, +12VA, two hundred and forty-five, one hundred and forty-five, DISCHARGE FAIL, DISCHARGE FIRING, one hundred and twenty, one hundred and twenty-one, 38V, -12V, ninety-nine and one hundred. There are twenty-three pins across the top. The first set of four pins is labeled A A. The second set of four pins is labeled B B. The third set of four pins is labeled C C. These three sections are collectively labeled +28V with arrows pointing to two pins in each section of four. The remaining pins are labeled one hundred and sixty-three, one hundred and sixty-two, one hundred and sixty-one, THY3 (W), -12V (R), THY2 (W) -12V (R), THY1 (W), -12V (R), four hundred and fifty-one and four hundred and seventy-one.

Call or email the staff at AX Control for additional information.

","meta_title":"Printed Master Connection Board","meta_description":"Printed Master Connection Board","keywords":"Printed Master Connection Board","series_page_description":"Printed Master Connection Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-21 14:11:55","prod_pdf":[{"id":3189,"product_id":8887,"pdf_id":14211,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14211,"pdf_type_id":1,"file_name":"0-51377-35.pdf","title_tag":"Printed Master Connection Board | PDF","alt_tag":"Printed Master Connection Board | PDF","created_at":null,"updated_at":null}}]},{"id":9069,"part_number":"0-51377-38","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Master Connection Motherboard","short_desc":null,"content":"

The 0-51377-38 module is a circuit board that was designed and manufactured by Reliance Electric. Specifically, the 0-51377-38 circuit board’s purpose is to be a motherboard test card and GTS drive. AX Control continues to stock the 0-51377-38 circuit board, despite it being discontinued by the original manufacturer. If interested, be sure to call or email AX Control for more information on this product.

Upon first examination, the 0-51377-38 circuit board is very similar in appearance to the 0-51377-40 circuit board. The main differences between these boards’ appearances is that the 0-51377-38 circuit board lacks the small red transistor in the top left corner and some differences in what some of the boards’ electrical components are responsible for doing, which is indicated by differences in labeling. The inclusion of the transistor in the 0-51377-40 circuit board ensures that signals can be amplified and rectified accordingly. For specific information about the differences in labeling on and for information about purchasing the 0-51377-40 circuit board, you can also find it on our website by clicking on the link above.

In the middle of the 0-51377-38 circuit board, there are five thin, long black electrical components. In order from left to right, these electrical components are labeled as follows: “TSTD,” “VSDA,” “VSRR,” “DCGB,” “CLSA.” At the end of each of these electrical components, there is a small circular hole where wires can be fed through for connection purposes. Also for the same purpose, there are four larger holes that are located toward the 0-51377-38 circuit board’s four corners. Along the sides of the 0-51377-38 circuit board, there are numerous small metal tabs that each serve a different purpose, as is labeled.

The 0-51377-38 circuit board has an approximate weight of 0.59 lbs. or 0.27 kg.

","meta_title":"Master Connection Motherboard","meta_description":"Master Connection Motherboard","keywords":"Master Connection Motherboard","series_page_description":"Master Connection Motherboard","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-16 08:25:35","prod_pdf":[{"id":74,"product_id":9069,"pdf_id":15549,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15549,"pdf_type_id":1,"file_name":"0-51377-38.pdf","title_tag":"Master Connection Motherboard","alt_tag":"Master Connection Motherboard","created_at":null,"updated_at":null}}]},{"id":8888,"part_number":"0-51377-39","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Circuit Board","short_desc":"","content":null,"meta_title":"Reliance Circuit Board","meta_description":"Reliance Circuit Board","keywords":"Reliance Circuit Board","series_page_description":"Reliance Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3188,"product_id":8888,"pdf_id":14212,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14212,"pdf_type_id":1,"file_name":"0-51377-39.pdf","title_tag":"Reliance Circuit Board | PDF","alt_tag":"Reliance Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":9067,"part_number":"0-51377-40","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"3VT 5-50HP Motherboard","short_desc":null,"content":"

The 0-51377-40 is a circuit board from Reliance Electric. The 0-51377-40 is a small circuit board with not much to it. The 0-51377-40 features five long black connection ports in the middle of the circuit board. They are labeled TSTH, VTDB, VTAB, VTGA, and CLSA (from left to right on the circuit board). There are fourteen metal sticks on the left edge labeled from top to bottom 32A, 109A, 32, 31, 33, 112, 109, 110, 111, 114, 28, 326, 57, and 367. At the top edge, there is a red tab labeled -12V across the top and MOT (+) +12V across the bottom. There are twelve metal sticks jointly labeled +28V. These twelve metal sticks are broken up into groups of four and labeled A+, A-, B+, B-, C+, and C-. There are then three metal sticks labeled 163, 162 and 161. Then six more metal sticks labeled THY3, -12V, THY2, -12V, THY1, and -12V on one side and W, R, W, R, W, and R on the opposite side. Then two more metal sticks labeled 451, and 471. On the right side of the circuit board are twenty-seven more metal sticks. These are labeled (from top to bottom) 23, 516, 22, 71, 56, 57, SNUBBER ON SIGNAL, -12VA, -6.3VA, 0VA, +6.3VA, +12VA, 245+, 145-, DISCHARGE FAIL, DISCHARGE FIRING, 120, 121, 38V, -12V, 99, and 100.

Want to receive additional details about the 0-51377-40? Wondering how much the 0-51377-40 costs or how fast it could be shipped to you? Call AX Control for all the answers.

","meta_title":"3VT 5-50HP Motherboard","meta_description":"3VT 5-50HP Motherboard","keywords":"3VT 5-50HP Motherboard","series_page_description":"3VT 5-50HP Motherboard","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 09:05:11","prod_pdf":[{"id":73,"product_id":9067,"pdf_id":15550,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15550,"pdf_type_id":1,"file_name":"0-51377-40.pdf","title_tag":"3VT 5-50HP Motherboard","alt_tag":"3VT 5-50HP Motherboard","created_at":null,"updated_at":null}}]},{"id":9071,"part_number":"0-51377-41","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Circuit Card","short_desc":null,"content":"

The 0-51377-41 is a circuit board made by Reliance Electric. The 0-51377-41 may have also been produced under the manufacturers ASEA BROWN BOVERI and Baldor Reliance depending on what year it was made. It may also be found listed under the additional part number 05137741.

The 0-51377-41 is also known as a Backplane Board. It is a long circuit board that has five long plastic black female backplane connector slots that run the length of it labeled TSTH, CTAB, VTGB, and CLSA. It also has metallic male pins that run the bottom of it. It has four large mounting factory-drilled holes.

The 0-51377-41 can be used with the PLC Module Rack, 086428011A. When used with this product, the 0-51377-41 is mounted under the module rack using screws and the four large factory drilled holes. A metal securing bar is also attached to the five female board connectors. Wiring from the Module Rack is run along the side of the enclosure to the metallic male pins.

For more information about the 0-51377-41 and how it connects to its corresponding PLC Module Rack, please refer to the product manuals or data sheets provided initially by Reliance Electric. If you have misplaced those sheets, please let one of AX Control’s staff members know as you are ordering the 0-51377-41 and we may be able to help you replace them.

If you would like to order the 0-51377-41 or have yours repaired, please email or call AX Control and we will be very happy to offer you an official price quote.

","meta_title":"Reliance Electric Circuit Card","meta_description":"Reliance Electric Circuit Card","keywords":"Reliance Electric Circuit Card","series_page_description":"Reliance Electric Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-18 08:56:47","prod_pdf":[{"id":71,"product_id":9071,"pdf_id":15551,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15551,"pdf_type_id":1,"file_name":"0-51377-41.pdf","title_tag":"Reliance Electric Circuit Card","alt_tag":"Reliance Electric Circuit Card","created_at":null,"updated_at":null}}]},{"id":9068,"part_number":"0-51377-8","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Circuit Card","short_desc":null,"content":"

The 0-51377-8 is a Reliance Electric designed PC board. This circuit card may have also been produced by ASEA BROWN BOVERI and Baldor Reliance depending on when it was manufactured. This part has since been discontinued by the manufacturers and is deemed obsolete.

The 0-51377-8 is a motherboard used on the MaxPak Plus D-C V*S Drive. It is a long circuit board that has nine long plastic black female board connector slots that run the length of it. It also has metallic male pins that run the bottom of it. It has four large mounting factory-drilled holes.

On MaxPak Plus drives, all of the control devices must be secured to the drive controller. The MaxPak controller is supplied with a NEMA 1 enclosure. However, these controllers may be mounted in NEMA 12 enclosures or in an open panel. These are still considered to be UL Listed. There are also options for allowing dynamic braking functions.

Before installing or altering the 0-51377-8 or any other MaxPak Plus part, please consult the proper instruction manuals from Reliance Electric to prevent product damage or personal injury.

Ax Control offers a wide variety of options for the shipping of the 0-51377-8. Please scroll over the ABOUT drop-down menu and click on SHIPPING OPTIONS to find out more about those options. To request a price quote or request a repair on your 0-51377-8, please call today or click the REQUEST A QUOTE or REQUEST A REPAIR icons.

","meta_title":"Reliance Electric Circuit Card","meta_description":"Reliance Electric Circuit Card","keywords":"Reliance Electric Circuit Card","series_page_description":"Reliance Electric Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-16 08:48:19","prod_pdf":[{"id":72,"product_id":9068,"pdf_id":15552,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15552,"pdf_type_id":1,"file_name":"0-51377-8.pdf","title_tag":"Reliance Electric Circuit Card","alt_tag":"Reliance Electric Circuit Card","created_at":null,"updated_at":null}}]},{"id":9066,"part_number":"0-51377-9","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Motherboard","short_desc":null,"content":"

The 0-51377-9 is a printed circuit board created by General Electric. The 0-51377-9 has seven metal spikes on the left edge of the circuit board, next to the first connection point on the board which is labeled STATIC SEQUENCE SSCA. In between the first connection point and the second connection point, there are ten metal spikes. The second connection point is labeled CURRENT VOLTAGE TRANSDUCTOR CVTD. In between the second and third connection point are four metal spikes and four thin metal tabs. The metal tabs are labeled X1, X2, X3, and X0. The third connection point is labeled PRECISION. There are six thin metal tabs labeled 6THY, 2THY, and 4THY. The fourth connection point is labeled CURRENT LOOP DRIVER CLDD. There are three thin metal tabs labeled 1THY, 2THY, and 3THY in between the fourth and fifth connection point along with three metal spikes. Between the sixth and seventh connection point are two metal spikes. On the right edge of the circuit board are twelve metal spikes with two points, one facing straight up and the other facing out. All the metal spikes are used to wrap metal wire around to connect various components like diodes, resistors, even capacitors or additional wire. The thin metal tabs are used to connect wires using a special connecting end that slips over the top of the thin metal tab and is pinched down to secure it.

Reach out to AX Control’s staff for additional information including prices, shipping options, or additional information about the services we offer.

","meta_title":"Reliance Electric Motherboard","meta_description":"Reliance Electric Motherboard","keywords":"Reliance Electric Motherboard","series_page_description":"Reliance Electric Motherboard","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 08:46:27","prod_pdf":[{"id":70,"product_id":9066,"pdf_id":15553,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15553,"pdf_type_id":1,"file_name":"0-51377-9.pdf","title_tag":"Reliance Electric Motherboard","alt_tag":"Reliance Electric Motherboard","created_at":null,"updated_at":null}}]},{"id":8889,"part_number":"0-51378-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Rectifier Stack","short_desc":null,"content":"

The 0-51378-1 is a small printed circuit board created by Reliance Electric. This circuit board has three transformers on the right edge of the circuit board. Above and below each of the transformers are metal tabs two above and two below. The tab on the left side both above and below is labeled RED, while the tab on the right both above and below are labeled WHT. Below each transformer is a resistor and a diode before the metal tabs. Below the tabs there is a K beneath the RED tab and a G beneath the WHT tab. Below all of the above-mentioned parts the first transformer (towards the right edge of the circuit board) has 1THY written below everything and a 1 written above it. The second transformer (moving towards the center of the circuit board) has 2THY written below it and a 2 written above it. The third transformer (in the center of the circuit board) has 3THY written below it and 3 written above it. The short side of the circuit board is labeled with letters while the top long edge is labeled numbers, these are used to measure and accurately install the circuit board. This small circuit board slides into a large block of metal known as a Rectifier Stack which is also created by Reliance Electric.

AX Control’s professional staff is standing by to assist you. They can be reached by phone or by email. We have a wide array of shipping options as well. To best suit your needs.

","meta_title":"Reliance Electric Rectifier Stack","meta_description":"Reliance Electric Rectifier Stack","keywords":"Reliance Electric Rectifier Stack","series_page_description":"Reliance Electric Rectifier Stack","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-21 15:08:23","prod_pdf":[{"id":3187,"product_id":8889,"pdf_id":14213,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14213,"pdf_type_id":1,"file_name":"0-51378-19.pdf","title_tag":"Reliance Electric Rectifier Stack | PDF","alt_tag":"Reliance Electric Rectifier Stack | PDF","created_at":null,"updated_at":null}}]},{"id":9075,"part_number":"0-51378-12","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Gate Coupling Board","short_desc":null,"content":"

The 0-51378-12 is a Gate Coupling Board constructed by Reliance Electric. This board may have also been manufactured by ASEA BROWN BOVERI, Allen Bradley, or Baldor Reliance depending on the year it was in production.

The 0-51378-12 is a printed circuit board that can be used as a diode substitution. This coupling board can be used with an 86475-11S Rectifier Stack. The 0-51378-12 is made up of several key parts including wired connectors, diodes, terminal pins, and dual resistors. This card is attached to the top of a heat sink on the rectifier stack or phase rectifier module. A rectifier stack is a device used to convert unpredictable AC current to a more manageable one-way flowing DC current. It does this by using a pair of thyristors to pulse at a specific point in the AC power cycle.

More information about the 0-51378-12 and the rectifier stack it attaches to can be found in the original Reliance Electric product manuals. Please refer to them before trying to attach the 0-51378-12 to its rectifier. Only a qualified professional should install this board.

If you would like an official price quote or for quotes about shipping costs for the 0-51378-12 from AX Control, please email or call us at 1-919-372-8413. Emails typically take 15 minutes to answer during normal business hours. Please contact us directly if you have any questions about the compatibility of the 0-51378-12 with your system. We are here to help make your repair process as smooth as possible.

","meta_title":"Gate Coupling Board","meta_description":"Gate Coupling Board","keywords":"Gate Coupling Board","series_page_description":"Gate Coupling Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-18 08:53:47","prod_pdf":[{"id":68,"product_id":9075,"pdf_id":15554,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15554,"pdf_type_id":1,"file_name":"0-51378-12.pdf","title_tag":"Gate Coupling Board","alt_tag":"Gate Coupling Board","created_at":null,"updated_at":null}}]},{"id":9078,"part_number":"0-51378-15","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Printed Circuit Coupling Gate Card","short_desc":null,"content":"

Reliance Electric was the company that was responsible for the creation and distribution of the 0-51378-15 gate coupling printed circuit board. The 0-51378-15 gate coupling board is typically stocked at AX Control, even though it has been discontinued by the original manufacturer. If you would like to purchase the 0-51378-15 gate coupling board, then feel free to contact us either by email or by phone, where you can ask us any questions that you may have about this or any of our other products.

The 0-51378-15 gate coupling board was created to be attached onto a Reliance Electric rectifier stack, such as the 86466-58R model. The 86466-58R rectifier stack is also available within AX Control’s stock, so feel free to use the link in the previous sentence above if you need to purchase one of those to go along with the 0-51378-15 gate coupling board. The 0-51378-15 gate coupling board is small enough to fit perfectly onto the top of a rectifier stack. It has a wire that runs from the top of the board to a port that lies somewhere in the center of the rectifier stack.

The 0-51378-15 gate coupling board only has a few electrical components on it. There is a large transistor on the top that is secured by a metal bar. There is a small rectifier and a small diode above it. In two of the 0-51378-15 gate coupling board’s corners, there is a small hole where you can feed wires through so that the board may be properly connected to the rectifier stack.

The 0-51378-15 gate coupling board only weighs about 0.10 lbs. or 0.045 kg.

","meta_title":"Printed Circuit Coupling Gate Card","meta_description":"Printed Circuit Coupling Gate Card","keywords":"Printed Circuit Coupling Gate Card","series_page_description":"Printed Circuit Coupling Gate Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-13 14:16:41","prod_pdf":[{"id":69,"product_id":9078,"pdf_id":15555,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15555,"pdf_type_id":1,"file_name":"0-51378-15.pdf","title_tag":"Printed Circuit Coupling Gate Card","alt_tag":"Printed Circuit Coupling Gate Card","created_at":null,"updated_at":null}}]},{"id":9085,"part_number":"0-51378-18","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Coupling Card","short_desc":"","content":null,"meta_title":"Coupling Card","meta_description":"Coupling Card","keywords":"Coupling Card","series_page_description":"Coupling Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":67,"product_id":9085,"pdf_id":15556,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15556,"pdf_type_id":1,"file_name":"0-51378-18.pdf","title_tag":"Coupling Card","alt_tag":"Coupling Card","created_at":null,"updated_at":null}}]},{"id":8890,"part_number":"0-51378-19","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":10,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Gate Coupling Board","short_desc":null,"content":"

The 0-51378-19 is a small Gate Coupling card manufactured by Reliance Electric. The circuit board is very small and is composed of one transformer in the center of the circuit board with three resistors, three diodes, and four metal pins. The side of the gate coupling card that has just a single diode and a single resistor on it has the following markings by the transformer and the resistor it is labeled X2, by the transformer and the diode it is labeled X1. The diode is 1REC. The two pins on this side are labeled G (W), K (R), and in between the pins, it says THY. On the side of the transformer that has two resistors and two diodes, it’s labeled H2, H1 at the edge of the transformer. The diode near the transformer is labeled 2 REC, the other diode is labeled 3 REC. The other two pins are labeled H1 (R), and H2 (W). The circuit board also has two holes with metal inlays one on either side of the transformer to secure the circuit board.

For additional information please reach out to the wonderful staff at AX Control to get a hold of your today.

","meta_title":"Gate Coupling Board","meta_description":"Gate Coupling Board","keywords":"Gate Coupling Board","series_page_description":"Gate Coupling Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-21 15:25:32","prod_pdf":[{"id":3186,"product_id":8890,"pdf_id":14213,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14213,"pdf_type_id":1,"file_name":"0-51378-19.pdf","title_tag":"Reliance Electric Rectifier Stack | PDF","alt_tag":"Reliance Electric Rectifier Stack | PDF","created_at":null,"updated_at":null}}]},{"id":9072,"part_number":"0-51378-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":5,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Gate Coupling Board","short_desc":null,"content":"

The 0-51378-2 is a gate coupling board that Reliance Electric was responsible for creating and manufacturing. Be aware that the 0-51378-2 gate coupling board was also manufactured under the company names Asea Brown Boveri and Baldor Reliance.

The 0-51378-2 gate coupling board is a small, rectangular board that is designed to attach to Reliance Electric rectifier stacks. An example of a rectifier stack that the 0-51378-2 gate coupling board is compatible with is the 86474-S module. Follow the link to find this rectifier stack on AX Control’s website.

Despite its small size, there are many different components to the 0-51378-2 gate coupling board. In the two top corners of the board, you will find a large hole. These holes are designed to fit large screws to attach the board itself to the compatible rectifier stack. The 0-51378-2 gate coupling board has a large transformer that takes up much of the space on the board. This component has black text on the top, with one of each printed onto each corner, which reads, “H1, “H2,” “X1,” and “X2.” There are two male stab connectors along the side of the board. These two connectors have long wires coming out of them, and they are designed to attach to ports that are located in the middle of the compatible rectifier stack. Next to these two connectors, there is one diode and one resistor.

The 0-51378-2 gate coupling board is very light in weight at only about 0.08 lbs. or 0.036 kg. This total does not include any packaging materials.

","meta_title":"Gate Coupling Board","meta_description":"Gate Coupling Board","keywords":"Gate Coupling Board","series_page_description":"Gate Coupling Board","quote_description":null,"inventory_notes":"BOX USED ON ANOTHER ORDER ON 1","cross_reference":"","created_at":null,"updated_at":"2019-09-13 08:12:23","prod_pdf":[{"id":65,"product_id":9072,"pdf_id":15557,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15557,"pdf_type_id":1,"file_name":"0-51378-2.pdf","title_tag":"Gate Coupling Board","alt_tag":"Gate Coupling Board","created_at":null,"updated_at":null}}]},{"id":9074,"part_number":"0-51378-27","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Coupling Gate Board","short_desc":null,"content":"

The 0-51378-27 module is a coupling gate card. The 0-51378-27 card was designed and manufactured by Reliance Electric.

The 0-51378-27 card is small in size and square in shape. Most of the 0-51378-27 card comprises of two large, identical transformers that sit on the right side of the card. The transformers each have four ports that are both labeled the same way. The two ports on the right side of these transformers are labeled as “H1” and “H2.” The two ports on the left side are labeled as “X1” and “X2.”

To the left of these two transformers are four capacitors, which are used to store electricity. Two of these capacitors are black and two are brown, with the black ones being larger than the brown ones. Beside these capacitors are three wires that extend outward approximately the length of the board. These wires are labeled as “G1,” “+,” and “G2,” in that exact order. The cords that are labeled as “G1” and “G2” have orange connective pieces and the one labeled as “+” has a silver/gray connective piece.

To the right of the two transformers are eight capacitors. Four of the capacitors have a light blue color and the other four have a yellow color.

Without any of AX Control’s reliable and safe packaging materials included in the total weight, the 0-51378-27 coupling gate card weighs total of 0.90 lbs. or 0.41 kg., approximately. To learn more about our extensive and flexible shipping products and procedures, such as blind shipping and Next Day Air AM shipping, please visit https://www.axcontrol.com/shipping-options for more details.

","meta_title":"Reliance Electric Coupling Gate Board","meta_description":"Reliance Electric Coupling Gate Board","keywords":"Reliance Electric Coupling Gate Board","series_page_description":"Reliance Electric Coupling Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-23 16:15:57","prod_pdf":[{"id":66,"product_id":9074,"pdf_id":15558,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15558,"pdf_type_id":1,"file_name":"0-51378-27.pdf","title_tag":"Reliance Electric Coupling Gate Board","alt_tag":"Reliance Electric Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9076,"part_number":"0-51378-30","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Gate Coupling Board","short_desc":null,"content":"

The 0-51378-30 is a Gate Coupling Board created by Reliance Electric. This card may have been sold under the manufacturing names ASEA BROWN BOVERI and Reliance Electric depending on what year it was mass-produced. This card is considered to be retired by the manufacturer but AX Control does offer this part as a new surplus or refurbished product.

The 0-51378-30 is a narrow 3x5 Gate Coupling Circuit Board. It is a printed circuit board or PCB that has multicolored wires coming off of the transformers and 8 red resistors on the right bottom edge. It has two small factory-drilled holes on the left side of the card. It weighs roughly .37lbs. This board is connected to two circuits or devices and transfer energy during the gate process.

Please refer to the product manuals and datasheets provided by Reliance Electric for more information about the 0-51378-30. Only trained professionals should install the 0-51378-30 to prevent any type of personal injury or system damage. If you have misplaced the product guides for this part, please let AX Control know as you are purchasing this part and we might be able to replace them if they are available.

AX Control offers to ship the 0-51378-30 today if your order is placed before 4 pm during standard business days. If you have any questions about this circuit board, please don’t hesitate to call us directly at 1-919-372-8413. One of our expert staff members is here to help you through your purchase and the speedy repair of your existing system.

The 0-51378-31 is a gate card produced by Reliance Electric. This is a small yet customizable card. The 0-51378-31 comes with two transformers toward the bottom of the card. These transformers have four wires (green, mauve, red, and yellow) attached to each and these wires are twisted together to keep them in order. At the end of each colored wire is a small attachment with a plastic insulator that allows the wires to be connected to another circuit board using a thin metal tab. There is space above these to add to additional transformers if needed. These openings for additional transformers are labeled 417102-11T. There are two small wires labeled J1 and J2 at the top edge. There is also a yellow and a black wire attached directly to the circuit board. There are seven metal attachments on the left edge that are boxed off and numbered (from top to bottom) 445, 447, 120, 16, 18, 178, and 19. The 0-51378-31 also has two Zenner diodes (orange with a black line) labeled D3, and D4. There are two open places to add two more diodes labeled D1 and D2. On all four lines, the diodes are on is a small circle on one side. This circle is used to indicate where the line on the diode should face. There are also two light blue carbon film resistors labeled R3 and R4. There are two openings to add two additional resistors labeled R1 and R2.

AX Control is available via email or by phone to assist you.

","meta_title":"Coupling Gate Board","meta_description":"Coupling Gate Board","keywords":"Coupling Gate Board","series_page_description":"Coupling Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 11:09:50","prod_pdf":[{"id":62,"product_id":9081,"pdf_id":15560,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15560,"pdf_type_id":1,"file_name":"0-51378-31.pdf","title_tag":"Coupling Gate Board","alt_tag":"Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9086,"part_number":"0-51378-32","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Rectifier Coupling Gate Board","short_desc":"","content":null,"meta_title":"Rectifier Coupling Gate Board","meta_description":"Rectifier Coupling Gate Board","keywords":"Rectifier Coupling Gate Board","series_page_description":"Rectifier Coupling Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":63,"product_id":9086,"pdf_id":15561,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15561,"pdf_type_id":1,"file_name":"0-51378-32.pdf","title_tag":"Rectifier Coupling Gate Board","alt_tag":"Rectifier Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9084,"part_number":"0-51378-33","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Coupling Gate Board","short_desc":null,"content":"

Reliance Electric is the creator of the 0-51378-33 gate coupling card. The 0-51378-33 gate coupling card was also manufactured by the company names Baldor Reliance and Asea Brown Boveri under the same product number.

The first thing that you will notice about the 0-51378-33 gate coupling card will be the many different long wires that are attached to the board which have pink connection ends. The majority of the wires are in four groups of four of the following colors: red, green, brown, and yellow. These groups of wires are attached to the bottom of the 0-51378-33 gate coupling card, where they connect to four transformers that are on the top side of the board. The top of these four transformers have black text which read, “H1,” “H2,” “X1,” “X2,” “X3,” and “X4.” Above these transformers, there is a small hole where you can feed wires to each side of the board.

The remaining two wires are black and yellow, and they are attached to one of the short sides of the board. Next to these two isolated wires, you will find two the 0-51378-33 gate coupling card’s only two jumpers located on either side. In the bottom right corner of the 0-51378-33 gate coupling card, you will find a row of eight electrical components. This row consists of four resistors and four diodes, which are lined up in an alternating fashion.

The 0-51378-33 gate coupling card weighs approximately 0.35 lbs. or 0.16 kg. This total does not include any of AX Control’s packaging materials.

","meta_title":"Coupling Gate Board","meta_description":"Coupling Gate Board","keywords":"Coupling Gate Board","series_page_description":"Coupling Gate Board","quote_description":null,"inventory_notes":"ALSO (608870-48T) one has a rev A on the end (0-51378-33A)","cross_reference":"","created_at":null,"updated_at":"2019-09-12 09:18:05","prod_pdf":[{"id":28,"product_id":9084,"pdf_id":15562,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15562,"pdf_type_id":1,"file_name":"0-51378-33.pdf","title_tag":"Coupling Gate Board","alt_tag":"Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9079,"part_number":"0-51378-34","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Coupling Gate Board","short_desc":"","content":null,"meta_title":"PC Coupling Gate Board","meta_description":"PC Coupling Gate Board","keywords":"PC Coupling Gate Board","series_page_description":"PC Coupling Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":29,"product_id":9079,"pdf_id":15563,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15563,"pdf_type_id":1,"file_name":"0-51378-34.pdf","title_tag":"PC Coupling Gate Board","alt_tag":"PC Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9073,"part_number":"0-51378-39","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":4,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"100-150HP Coupling PC Board","short_desc":null,"content":"

A 0-51378-39 is a Gate Coupling Card created for Reliance Electric. This board may have also been sold under the Asea Brown Boveri or Balder Electric product lines. It may also be found under the part number O5137839.

The 0-51378-39 is used in a MaxPak Spindle Drive and is a replacement card in a Field Gate Coupling Kit. This replacement printed circuit gate coupling card is rated for 100-150HP. This is a very small card. It has three black and silver diodes that are labeled REC 1, REC 2, and REC 3. It also has three peach-colored resistors. There is a labeled transformer in the center of the card. It is labeled X2, X1, H2, and H1. The transformer is held into place by a metal bracket. There are four metal pins on the card. Two are collectively labeled as THY, the upper one is labeled K and the other one is labeled G. the other two metal pins are labeled H1 and H2. This card also has two holes on the top right and bottom left corners.

For more information about this Gate Coupling Card, please refer to the user’s manuals and datasheets released by Reliance Electric for the 0-51378-39. Only a trained professional should attempt to install this drive to prevent any type of serious injuries and system damage.

When the 0-51378-39 is in stock, AX Control offers to ship the 0-51378-39 the same day it is ordered as long as we receive the placed order by 4 pm during normal business days.

","meta_title":"100-150HP Coupling PC Board","meta_description":"100-150HP Coupling PC Board","keywords":"100-150HP Coupling PC Board","series_page_description":"100-150HP Coupling PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-25 12:20:06","prod_pdf":[{"id":30,"product_id":9073,"pdf_id":15564,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15564,"pdf_type_id":1,"file_name":"0-51378-39.pdf","title_tag":"100-150HP Coupling PC Board","alt_tag":"100-150HP Coupling PC Board","created_at":null,"updated_at":null}}]},{"id":9077,"part_number":"0-51378-43","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Gate Coupling Board","short_desc":null,"content":"

The 0-51378-43 is a Gate Coupling Card created by Reliance Electric. This item could have been also produced by either ASEA BROWN BOVERI and Baldor Reliance, depending on when it was manufactured. This card was discontinued by the manufacturer and is now deemed obsolete. This product is also labeled under the part numbers O-51378-43 and O5137843.

The 0-51378-43 is considered to be a mini circuit board. It possesses two black transformers on the left side of it. There are nine black diodes and four orange capacitors on this card. In each corner of the card, there is a small drilled-out hole meant for mounting screws. This card comes with a red, yellow, green, and peach-colored wire that is coming off of one end. The wire has been braided together and secured with a zip tie to keep it from becoming tangled.

For more information about the 0-51378-43, please consult a Reliance Electric User Instruction Manual.

To find out about the price of this item from Ax Control for the 0-51378-43 tap the REQUEST A QUOTE icon in the center of the screen. If you need your 0-51378-43 repaired, please tap the REQUEST A REPAIR icon and fill out a submission form. Someone will contact you with a price quote. We have many shipping options available for in-stock items, please mouse over the ABOUT icon at the top of the page and scroll down to the SHIPPING OPTIONS icon to learn more. If you have any inquiries about the 0-51378-43, please don’t hesitate to contact AX Control directly via email or phone call.

","meta_title":"PC Gate Coupling Board ","meta_description":"PC Gate Coupling Board ","keywords":"PC Gate Coupling Board ","series_page_description":"PC Gate Coupling Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-04 10:43:44","prod_pdf":[{"id":31,"product_id":9077,"pdf_id":15565,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15565,"pdf_type_id":1,"file_name":"0-51378-43.pdf","title_tag":"PC Gate Coupling Board","alt_tag":"PC Gate Coupling Board","created_at":null,"updated_at":null}}]},{"id":9083,"part_number":"0-51378-44","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Coupling Gate Board","short_desc":"","content":null,"meta_title":"Coupling Gate Board","meta_description":"Coupling Gate Board","keywords":"Coupling Gate Board","series_page_description":"Coupling Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":32,"product_id":9083,"pdf_id":15566,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15566,"pdf_type_id":1,"file_name":"0-51378-44.pdf","title_tag":"Coupling Gate Board","alt_tag":"Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9080,"part_number":"0-51378-5","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board for Coupling","short_desc":"","content":null,"meta_title":"PC Board for Coupling","meta_description":"PC Board for Coupling","keywords":"PC Board for Coupling","series_page_description":"PC Board for Coupling","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":33,"product_id":9080,"pdf_id":15567,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15567,"pdf_type_id":1,"file_name":"0-51378-5.pdf","title_tag":"PC Board for Coupling","alt_tag":"PC Board for Coupling","created_at":null,"updated_at":null}}]},{"id":9082,"part_number":"0-51378-6","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Coupling Gate Board","short_desc":"","content":null,"meta_title":"Coupling Gate Board","meta_description":"Coupling Gate Board","keywords":"Coupling Gate Board","series_page_description":"Coupling Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":34,"product_id":9082,"pdf_id":15568,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15568,"pdf_type_id":1,"file_name":"0-51378-6.pdf","title_tag":"Coupling Gate Board","alt_tag":"Coupling Gate Board","created_at":null,"updated_at":null}}]},{"id":9087,"part_number":"0-51381-10","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric SCRF PC Board","short_desc":null,"content":"

The 0-51381-10 is a Min-Pak also called an SCRF circuit board manufactured by Reliance Electric. This circuit board features a large grid across the surface. The width lines are measured with numbers and the long lines are labeled with letters. The 0-51381-10 has a large transformer in the lower right corner. There are also two large induction coils in the center and the lower edge of the card. The left edge uses twelve screw points to connect wires to the card. The 0-51381-10 has eight PCB mount electrolytic capacitors, one yellow polypropylene capacitor, and three polyester capacitors. There are thirteen small bead sized fusible resistors, twenty-five carbon composition resistors, and six carbon film resistors. There are eleven thin metal tabs around the circuit board whose purpose is to have wires connected to them. The 0-51381-10 also has six transistors both silver and round and small and black. At the top of the circuit board are four silver circular knobs that can go from zero to ten. The first knob is labeled Accelerate, the second knob is labeled Max Speed, the third knob is labeled Current Limit, and the fourth knob is labeled Air Comp. There is also a series of wires on the circuit board. There are four white wires coming from the induction coils, and a green wire, an orange wire, a red wire, a light brown wire, a light blue wire, and a black wire coming from the transformer.

AX Control’s staff is standing by to help you order your part today.

","meta_title":"Reliance Electric SCRF PC Board","meta_description":"Reliance Electric SCRF PC Board","keywords":"Reliance Electric SCRF PC Board","series_page_description":"Reliance Electric SCRF PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 11:50:38","prod_pdf":[{"id":35,"product_id":9087,"pdf_id":15569,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15569,"pdf_type_id":1,"file_name":"0-51381-10.pdf","title_tag":"Reliance Electric SCRF PC Board","alt_tag":"Reliance Electric SCRF PC Board","created_at":null,"updated_at":null}}]},{"id":9090,"part_number":"0-51381-11","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Drive Controller Board","short_desc":null,"content":"

The 0-51381-11 is a control card for the Reliance Min-Pak created by Reliance Electric. The 0-51381-11 is very similar to the rest of the circuit boards created for the 0-51381 series of Reliance Electric. Each board only varies slightly in regard to the style of the components used. However, there is still the same number of each component and they are all in the same position on each circuit board. The 0-51381-11 still uses resistors, capacitors, diodes, and transistors to achieve the circuit boards purpose, just each circuit board in the 0-51381 series uses a different style of each piece on each card. The 0-51381-11 like the other cards still features a large transistor and two large induction coils. The transformer still has six different colored wires that are attached to it. However, the induction coils have bright yellow and dark green wires attached to them. The 0-51381-11 also still has the four metal dial controls at the top of the board. Labeled Accel Rate, Max Speed, Current Limit, and IR COMP. The controls still go from zero to ten or anywhere in between and can be moved without affecting the other dials. The 0-51381-11 also has a grid pattern like the other boards in this series labeled in numbers five to eighty and increasing by fives. The other side of the grid uses letters of the alphabet going from A to Z and then doubling up AA through AZ and BA through BD.

AX Control offers hard to find parts at hard to believe prices.

","meta_title":"Drive Controller Board","meta_description":"Drive Controller Board","keywords":"Drive Controller Board","series_page_description":"Drive Controller Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 12:32:40","prod_pdf":[{"id":36,"product_id":9090,"pdf_id":15570,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15570,"pdf_type_id":1,"file_name":"0-51381-11.pdf","title_tag":"Drive Controller Board","alt_tag":"Drive Controller Board","created_at":null,"updated_at":null}}]},{"id":8891,"part_number":"0-51381-13","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Control Board","short_desc":null,"content":"

The 0-51381-13 is a PC Controller circuit board made by Reliance. This PC Controller circuit board has twelve small silver screws separated by black dividers. These screws are used to secure different wires to the circuit board. The 0-51381-13 has a large transformer on the right side of the circuit board. There are eight various colored wires attached to the transformer. The circuit board has a few transistors that amplify energy flowing around the circuit board. The 0-51381-13 also has some capacitors to store energy, resistors to rid the circuit board of energy, diodes to direct energy flow. The 0-51381-13 has nine metal tabs that are used to also attach various wires between circuit boards. The metal tabs are labeled from left to right as follows 45, 32, G2, G1, 47, 182, 181. The circuit board’s surface is mapped out in a grid-like pattern. The edges of the grid where the lines are are labeled with various numbers. These numbers allow for the circuit board to easily be installed into the drive you need the circuit board for. To secure the circuit board once installed you can use the predrilled holes around the circuit board. Along with the grid-like pattern on the circuit boards surface, there are also smaller shapes drawn into the grid pattern that go around other components of the circuit board like, the transistors. There are also four circles drawn across the top three of which have a metal circular piece in the center and each one is labeled.

","meta_title":"Reliance Control Board","meta_description":"Reliance Control Board","keywords":"Reliance Control Board","series_page_description":"Reliance Control Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 14:28:49","prod_pdf":[{"id":37,"product_id":8891,"pdf_id":15571,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15571,"pdf_type_id":1,"file_name":"0-51381-13.pdf","title_tag":"Reliance Control Board","alt_tag":"Reliance Control Board","created_at":null,"updated_at":null}}]},{"id":9089,"part_number":"0-51381-14","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PCB Circuit Control Board","short_desc":null,"content":"

Reliance Electric is the maker of the 0-51381-14 circuit board. This card contains the same number of pieces as all other circuit boards in the 0-51381 lineup manufactured by Reliance Electric. The number of pieces is the same except the style of resistors, diodes, and capacitors vary from circuit board to circuit board. The 0-51381-14 features eleven metal tabs to attach wires, along with a twelve screw port connector on the left side. The 0-51381-14 uses two large induction coils that are wrapped and are red on the bottom and white on the top. These are double zip tied to secure them to the board and keep them standing upright. The induction coils have a total of four wires attached to them, two of the wires are white and the other two wires are black. There is also a large transformer to the right of the induction coils. This transformer has a bright red wire, a light green wire, a light brown wire and a black wire that are coming out of it. The top of the 0-51381-14 board has four metal controls that rotate. They are labeled CURRENT LIMIT, MAX. SPEED, IR COMP, and ACCELERATE. The can be controlled independently of each other and each has the option of going from zero to ten or anywhere in between. There is also a silver box in the lower left corner with a circuit drawing on the lid.

Allow the friendly staff at AX Control assist you will all of your automation needs.

","meta_title":"PCB Circuit Control Board","meta_description":"PCB Circuit Control Board","keywords":"PCB Circuit Control Board","series_page_description":"PCB Circuit Control Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 12:18:24","prod_pdf":[{"id":38,"product_id":9089,"pdf_id":15572,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15572,"pdf_type_id":1,"file_name":"0-51381-14.pdf","title_tag":"PCB Circuit Control Board","alt_tag":"PCB Circuit Control Board","created_at":null,"updated_at":null}}]},{"id":9088,"part_number":"0-51381-16","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Controller Card","short_desc":null,"content":"

The 0-51381-16 is a controller card manufactured by Reliance Electric. This card is very similar to all the cards included in the 0-51381 series models made by Reliance Electric. This card features four dials at the top labeled IR COMP, CURRENT LIMIT, MAX. SPEED, and ACCELERATE. Around each dial are markings with a zero, a five and a ten printed out with hash marks in between each printed number. The 0-51381-16 card also has a female connection point on the left with screws on the top to secure each plugin. The circuit board uses a large number of resistors of different styles, a range of different style didoes and an array of capacitors to achieve what it needs. The 0-51381-16 has a large black box in the lower left corner that is labeled ES51381, 8403-0026, COTO-9124. There are around ten transistors to amplify energy that is created by the large transformer and the two large wrapped coil inductors. Every piece on this circuit board is labeled and placed in a specific place in accordance with the grid pattern on the surface of the 0-51381-16. Every piece fit within a grid square of directly on a grid line or at an intersection of two lines. Each piece is also labeled with the letter code to show what the piece is and the number showing which number that part is on the circuit board.

If you would like a price for the 0-51381-16 or have any questions regarding the circuit board call AX Control.

","meta_title":"Reliance Electric Controller Card","meta_description":"Reliance Electric Controller Card","keywords":"Reliance Electric Controller Card","series_page_description":"Reliance Electric Controller Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 12:06:08","prod_pdf":[{"id":39,"product_id":9088,"pdf_id":15573,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15573,"pdf_type_id":1,"file_name":"0-51381-16.pdf","title_tag":"Reliance Electric Controller Card","alt_tag":"Reliance Electric Controller Card","created_at":null,"updated_at":null}}]},{"id":16229,"part_number":"0-51382","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","short_desc":null,"content":"

0-51382 Reliance Electric Relay Circuit 115 V

The 0-51382 is a circuit board made by Reliance to be used in the company’s drives. This board is usually marked with the Reliance logo, but in some cases, it may have originated from ABB or from Baldor-Reliance. Our team will be happy to help if you have questions about compatibility between your current component and this listing.

The 0-51382 functions as a 115 V Relay circuit board. This is a small circuit board that has been drilled in the middle of both short ends to allow for the addition of mounting hardware. It has several other mounting holes drilled within its body. Board components include diodes, a resistor, a four-position terminal strip, and a transformer with multiple screw connections mounted above it. These connections connect to wires that terminate into the board’s surface.

Technical support publications like data sheets, user guides, or product manuals will provide more detailed information on this product. These were originally provided to the end user by Reliance.

The 0-51382 board is a static sensitive product. As such, the AX Control warehouse team will use an anti-static wrapping to protect it during transit, along with our regular high-quality shipping standards. Ask our team for a shipping quote today.

","meta_title":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","meta_description":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","keywords":"RELIANCE ELECTRIC, PC BOARD, RELAY CIRCUIT, 115V","series_page_description":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-29 09:21:32","prod_pdf":[]},{"id":18035,"part_number":"0-51382-10","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","short_desc":null,"content":"

The 0-51382-10 is a printed circuit board relay circuit 115 V card. The 0-51382-10 card was developed and manufactured by Reliance Electric.

The 0-51382-10 is a small card with a small, one story standard terminal block. The terminal block has four openings on it. In the center, there is a multi-layer connection terminal which has numerous wires attached to it. The card itself is green in color and has multiple white squares that are all connected.

The 0-51382-10 relay circuit card weighs about 0.65 lbs. or 0.29 kg. This total weight is not including any of AX Control’s packaging materials, which are made to keep the products you purchase safe from any damage. We know that the shipping and handling process is filled with bumps, falls, and other incidents that can cause unnecessary and unwanted damage to your product, so we made sure to create packaging materials that are perfect for its contents. Please visit https://www.axcontrol.com/shipping-options to learn more about our shipping options, including Next Day Air Early AM and our blind shipping option.

In addition to our flexible shipping options, we are also very flexible when it comes to the way you can pay for your orders. For our North American customers, you can pay using Visa, American Express, MasterCard, Discover, and personal checks. For customers outside of North America, we accept wire transfers. If you happen to be near our headquarters in Fuquay Varina, North Carolina, then feel free to come by our office and pay with cash.

","meta_title":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","meta_description":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","keywords":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","series_page_description":"RELIANCE ELECTRIC PC BOARD RELAY CIRCUIT 115V","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-23 15:52:31","prod_pdf":[]},{"id":8892,"part_number":"0-51385","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power PC Board","short_desc":null,"content":"

The 0-51385 is a PC Board Compression Network created by Reliance Electric. This board may have also been sold under the manufacturing names ASEA BROWN BOVERI, Allen Bradley, and Baldor Reliance depending on what year it was mass-produced. It has the alternate part number O51385. This part has been discontinued by the manufacturers, so it can be sometimes hard to find. AX Control offers this board as new surplus stock part or a refurbished part.

The 0-51385 is a circuit card used in an Armature Rectifier Assembly. The circuit card is typically located in a metal power module assembly under a pair of phase rectifier modules. There are wires running from the compression network through the power module assembly to the rectifier stacks.

The main purpose of the 0-51385 is to provide power to Reliance Electric DC drives. These drives use the rectifier assemblies to convert single-phase AC power into adjustable DC power. This is done because DC power is easier to control because it only flows one way.

The circuit board has three metal rectangular relays with four wire attachments each (two on the top, two on the bottom). There are six blue resistors on the circuit board. The circuit board also has a large cluster of twisted black and orange wires with small metal eyelets on the end of each wire. There are also six large red circular variable resistors on this board.

For a price quote, please call or email AX Control directly. We are here to help you during your system repair process.

","meta_title":"Power PC Board","meta_description":"Power PC Board","keywords":"Power PC Board","series_page_description":"Power PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-19 09:38:31","prod_pdf":[{"id":3185,"product_id":8892,"pdf_id":14216,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14216,"pdf_type_id":1,"file_name":"0-51385.pdf","title_tag":"Power PC Board | PDF","alt_tag":"Power PC Board | PDF","created_at":null,"updated_at":null}}]},{"id":9091,"part_number":"0-51418-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Printed Circuit PC Board","short_desc":null,"content":"

The 0-51418-1 is a small printed circuit board created by Reliance Electric. This card has a small grid on the surface. The left side of the grid is labeled A, B, C, D, E, F, G, H, J, K, L, M, N, O, P, Q, R, and S. The upper edge of the grid is labeled in increments of five starting at zero and going five, ten, fifteen, twenty, twenty-five, and thirty. Above the numbered edge of the grid are three metal tabs labeled one, two, and three. These are used to connect wires to the 0-51418-1 board. In the grid pattern are three long orange wire wound resistors that are connected to the circuit board at either end and also secured using metal brackets in the center of the resistor. To secure this card in place there are two metal brackets at the bottom of the card with holes to place screws.

If you would like to order a 0-51418-1 card or have questions about this card please contact AX Control.

","meta_title":"Printed Circuit PC Board","meta_description":"Printed Circuit PC Board","keywords":"Printed Circuit PC Board","series_page_description":"Printed Circuit PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 08:24:47","prod_pdf":[{"id":40,"product_id":9091,"pdf_id":15574,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15574,"pdf_type_id":1,"file_name":"0-51418-1.pdf","title_tag":"Printed Circuit PC Board","alt_tag":"Printed Circuit PC Board","created_at":null,"updated_at":null}}]},{"id":9093,"part_number":"0-51418-2","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Circuit Board","short_desc":null,"content":"

The 0-51418-2 unit is one of the many printed circuit boards that was developed and produced by Reliance Electric. The 0-51418-2 printed circuit board continues to be stocked at AX Control despite being a discontinued product by Reliance Electric and therefore no longer sold new by them. To check on the availability of the 0-51418-2 printed circuit board, please give us a quick call or send us an email. We can also give you a quote if you are interested.

The 0-51418-2 printed circuit board is a double sided board. The two sides are completely identical, so the following description applies to the bottom side as well as the top side. On the surface of the 0-51418-2 printed circuit board, there is a small grid. The top of the grid is labeled from 0 to 30 in increments of five. The left hand side of the grid is labeled alphabetically from A to S. The grid is then split up into six rows of five rectangles. Using through hole mounting techniques, there are nine long resistors that are suspended above the grid. These nine resistors are split up into three groups of three. At each end of these groups of three, there lies a small metal tab. These tabs are labeled from the numbers 1 through 6. These long resistors are held to the board by large black hooks. In between the two sides of the board, there are three metal hooks that are used to attach the board onto an applicable place.

The 0-51418-2 printed circuit board has an approximate weight of 0.83 lbs. or 0.38 kg. This total does not include any of the materials that AX Control uses for packaging purposes with every single shipment.

","meta_title":"Reliance Electric Circuit Board","meta_description":"Reliance Electric Circuit Board","keywords":"Reliance Electric Circuit Board","series_page_description":"Reliance Electric Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-17 08:29:46","prod_pdf":[{"id":41,"product_id":9093,"pdf_id":15575,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15575,"pdf_type_id":1,"file_name":"0-51418-2.pdf","title_tag":"Reliance Electric Circuit Board","alt_tag":"Reliance Electric Circuit Board","created_at":null,"updated_at":null}}]},{"id":8893,"part_number":"0-51418-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance PC Board Card","short_desc":null,"content":"

The 0-51418-4 module is a circuit board that Reliance Electric designed and produced. AX Control typically has the 0-51418-4 circuit board in stock, even though it is no longer offered new or supported in any way by the original manufacturer. You can call AX Control for more information on the 0-51418-4 circuit board’s availability and for the chance to ask any questions about its uses and features.

On the surface of the 0-51418-4 circuit board, there is a small grid. The top of this grid runs from the numbers 0 to 30 by multiples of five. The left side of this grid has letters rather than numbers, and they run alphabetically from A to S. On top of the 0-51418-4 circuit board’s grid, you will find nine long resistors. These resistors are grouped up in three groups of three and are each secured by a black hook.Adding on to that, each resistor is attached to the board using through-hole mounting, where there are small metal wires that are attached to them on either side. Along each of the grid’s longer sides, there are three metal tabs that are lined up next to each of the three groups of resistors. These metal tabs are labeled using the numbers 1 through 6. Located in each of the four corners of the 0-51418-4 circuit board, you will find a small screw that is used to secure the board in place. Also to assist in securing the 0-51418-4 circuit board in place, you can see there are a few hooks located on the underside of the board.

","meta_title":"Reliance PC Board Card","meta_description":"Reliance PC Board Card","keywords":"Reliance PC Board Card","series_page_description":"Reliance PC Board Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-16 08:16:49","prod_pdf":[{"id":42,"product_id":8893,"pdf_id":15576,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15576,"pdf_type_id":1,"file_name":"0-51418-4.pdf","title_tag":"Reliance PC Board Card","alt_tag":"Reliance PC Board Card","created_at":null,"updated_at":null}}]},{"id":8894,"part_number":"0-51419","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Coupling Gate","short_desc":null,"content":"

Reliance is the maker of the 0-51419 circuit board. This circuit board is laid out like a grid. It features six square white colored transformers and six circular black transformers equally spaced out across the circuit board. All the transformers are labeled with 2X, 1X, H2, H1, across the tops of them. The circuit board has three black “U” shaped brackets that go down the center of the board. If you were to fold the circuit board in half where these “U” shaped brackets are you would have a mirrored image of the circuit board on each half as far as the components on the circuit board are concerned, the labeling written on the surface would be off, however. The circuit board has the alphabet written from one end to the other A through Z then AA, AB, AC, AD, AE, and AF. There is also a tallied line going in the opposite direction of the alphabetic markings from zero to sixty with larger markings in increments of five. This line, however, is split to accommodate the components on the circuit board. There are six metal tabs labeled with both the letter “G” and the abbreviation WHT (for white) and six metal tabs labeled with the letter “K” and the word RED. The colors for each it so the engineer will know what type and color of wire to attach to the metal tabs.

If you would like to find out more about the 0-51419 circuit board or receive a quote to purchase one, reach out to the skilled staff of AX Control.

","meta_title":"PC Board Coupling Gate","meta_description":"PC Board Coupling Gate","keywords":"PC Board Coupling Gate","series_page_description":"PC Board Coupling Gate","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 15:32:06","prod_pdf":[{"id":60,"product_id":8894,"pdf_id":15577,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15577,"pdf_type_id":1,"file_name":"0-51419.pdf","title_tag":"PC Board Coupling Gate","alt_tag":"PC Board Coupling Gate","created_at":null,"updated_at":null}}]},{"id":17772,"part_number":"0-51421-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC NETWORK BOARD RES","short_desc":null,"content":"

The 0-51421-3 is a RES Network Board that is manufactured by Reliance. Reliance Electric produces this drive board assembly, and it is quite compact. In fact, it is a tiny circuit board that has three specific components, all of which are small. The first thing is a thick wire resistor. The second component is a larger metal capacitor. Finally, attached right off of the side of the card is a tower, also small, which is connected by wires. This RES Network Board can also be listed as other part numbers. 0514213 is one option. The other is 0514213 Asea Brown Boveri. The manufacturer information could also say Baldor Reliance.

Reliance Electric publishes the manufacturer’s guidelines, and a complete manual for the 0-51421-3 Network Board RES is available through Reliance. This manual can provide you with the technical details, specifications, installation guidelines, user friendly directions, and other data sheets.

If you have any more questions about the product, please call us to email us. We have a very talented sales staff and knowledgeable product team to help you with any of your questions. Please feel free to call us at at 1-800-991-7026 if you are located within the United States. For all international calls, use 1-919-372-8413. If you place your order by 3 pm, we will ship your package the same day. The precise cost of shipping is contingent upon the size of the package, its weight, and its volume. Feel free to reach out to us via email if that is more convenient. Our email is sales@axcontrol.com.

","meta_title":"RELIANCE ELECTRIC NETWORK BOARD RES","meta_description":"RELIANCE ELECTRIC NETWORK BOARD RES","keywords":"RELIANCE ELECTRIC NETWORK BOARD RES","series_page_description":"RELIANCE ELECTRIC NETWORK BOARD RES","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-23 10:55:21","prod_pdf":[]},{"id":8895,"part_number":"0-51422","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PCB Drive","short_desc":null,"content":"

The 0-51422 is a printed circuit board from Reliance. The circuit board has twelve metal tabs along the bottom edge. The tabs are split into pairs and labeled as follows 1THY (G-50 WH, K-51 RED), 4THY (G-52 WH, K53 RED), 2THY (G-54 WH, K-55 RED), 5THY (G-150 WH, K151 RED), 3THY (G-152 WH, K153 RED), and 6THY (G-154 WH, K-155 RED). These metal tabs are used to connect either white or red wires to the circuit board. The top edge of the circuit board is labeled with numbers zero, five, ten, fifteen, twenty, twenty-five, thirty, thirty-five, forty, forty-five, fifty, fifty-five, and sixty. Above the numbered grid is a small tab with twenty-two traces on it to connect into the drive. The left side of the circuit board is labeled A through Z then AA, AB, AC, AD, AE, AF, AG, AH, AJ, AK, AL, AM, and AN. The labels on the top and left side of the circuit board allow for simple measurement and installation into your system. The circuit board has six transformers near the bottom edge. Above each transformer is a transistor (six in total). There are eight large orange capacitors, six large yellow polypropylene capacitors (with their capacity written on the outside), six smaller yellow polypropylene capacitors (with their capacity written on the outside), twenty-four red capacitors (with their capacity written on the outside),six integrated circuits, twenty-four various resistors (banded components), thirty bead shaped diodes, and eighteen black and silver diodes.

Call AX Control for additional information.

","meta_title":"PCB Drive ","meta_description":"PCB Drive ","keywords":"PCB Drive ","series_page_description":"PCB Drive","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 08:51:10","prod_pdf":[{"id":61,"product_id":8895,"pdf_id":15578,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15578,"pdf_type_id":1,"file_name":"0-51422.pdf","title_tag":"PCB Drive","alt_tag":"PCB Drive","created_at":null,"updated_at":null}}]},{"id":8896,"part_number":"0-51423","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IET Power Supply Board","short_desc":null,"content":"

Reliance is the maker of the 0-51423 IET Power Supply Board. The circuit board has a large red button on a gold colored metal bracket, to the right of the red button are two clear LED lights also supported by gold metal brackets. The are three large blue polypropylene capacitors with information written on the outside. These blue polypropylene capacitors are so large they require additional support and are secured around their centers to the circuit board along with the electrical attachments on each end. There are nine yellow condensers with information scribed on the outside. There is one large transformer encased in clear plastic, with a mass of wires coming off the back of the cage. There are more wires in the middle of the circuit board that is connected to and tucked under an elevated metal plate that is right behind the red button and the LED lights. The surface of the circuit board is a grid pattern with each line labeled from the top by a series of numbers and from the side by a series of letters. The 0-51423 also uses other components to function such as diodes, resistors, other styles of condensers. The circuit board can be secured into the drive using the tab toward the top of the circuit board with the gold colored lines. The gold color lines allow for electrical communication between the circuit board and the drive it is in.

If you require additional information reach out to the staff at AX Control.

","meta_title":"IET Power Supply Board","meta_description":"IET Power Supply Board","keywords":"IET Power Supply Board","series_page_description":"IET Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 09:14:08","prod_pdf":[{"id":58,"product_id":8896,"pdf_id":15579,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15579,"pdf_type_id":1,"file_name":"0-51423.pdf","title_tag":"IET Power Supply Board","alt_tag":"IET Power Supply Board","created_at":null,"updated_at":null}}]},{"id":17767,"part_number":"0-51426","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE PC BOARD FIELD LOSS","short_desc":null,"content":"

The 0-51426 module is a drive board was produced by Reliance Electric. AX Control continues to obtain the 0-51426 drive board, despite the fact that Reliance Electric no longer supports this product or offer it new. In the event that you need a 0-51426 drive board, then AX Control may be the solution for you. If you call or email us on a weekday between 8:00 a.m. and 5:00 p.m., then you can very easily check on the availability of this product by simply asking one of our friendly sales representatives. In addition to that, they can also assist you in figuring out if this particular product is the best one for your machinery and therefore the rest of your facility.

The 0-51426 drive board is a small, rectangular device with 460 Volts of power and only a few electrical parts. Toward the top of the device, you can find the catalog number printed onto the device in white. Just below that, there are two black wires coming out of the top. Below this, the rest of the board has a grid that is comprised of eight rows of two rectangles. Near the middle of the 0-51426 drive board, there is a small circular hole that is used to feed cables through for connective purposes. There are four components on the board. There are three smaller fusible resistors and one much larger metal capacitor.

Without adding in any of the packaging materials to the total, the 0-51426 drive board weighs about 0.10 lbs. or 0.045 kg.

","meta_title":"RELIANCE PC BOARD FIELD LOSS","meta_description":"RELIANCE PC BOARD FIELD LOSS","keywords":"RELIANCE PC BOARD FIELD LOSS","series_page_description":"RELIANCE PC BOARD FIELD LOSS","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-12 08:52:39","prod_pdf":[]},{"id":17751,"part_number":"0-51444","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":6,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC POWER SUPPLY DRIVER BOARD","short_desc":null,"content":"

The 0-51444 is a POWER SUPPLY DRIVER BOARD created by Reliance Electric. The 0-51444 three large wrapped induction coils near the upper edge of the card. Each of the induction coils is secured to the circuit board with two black cables and has a white and a black wire that comes out of them and connects to various points on the circuit board. The 0-51444 board also has three large transformers that are each secured to the circuit board using black cables. There are five large and one x-large black thick wire resistors. There are also sixteen small light pink fusible resistors and three light blue fusible resistors. The driver board has nine signal didoes (silver and black) and twelve orange and black Zenner didoes. The 0-51444 uses six small polypropylene capacitors, one large polypropylene capacitor, and three PCB mounted electrolytic capacitors (small, medium and a large). There are also seven circular silver transistors (six of which are in between the induction coils and the transformers). The circuit board also has a metal plate that is raised just above the surface of the 0-51444 with noting on it but a wire attachment. The circuit board also has titles printed in various section to label what that area does like “PHASING SEQUENCE” and “POWER SUPPLY”. There is also a dome-shaped LED light in a clear housing on the lower edge of the 0-51444 card. To learn more, refer to the instructional manuals made by Reliance Electric.

To order the 0-51444 call or email AX Control.

","meta_title":"RELIANCE ELECTRIC POWER SUPPLY DRIVER BOARD","meta_description":"RELIANCE ELECTRIC POWER SUPPLY DRIVER BOARD","keywords":"RELIANCE ELECTRIC POWER SUPPLY DRIVER BOARD","series_page_description":"RELIANCE ELECTRIC POWER SUPPLY DRIVER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-15 13:16:39","prod_pdf":[]},{"id":8897,"part_number":"0-51445","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Emitter Follower Controller Board","short_desc":null,"content":"

The 0-51445 is from Reliance. The circuit board has twenty-six metal tabs around the perimeter of circuit board. The tabs are each labeled with a different number. The circuit board has a large silver condenser, two large yellow condensers, and four medium-sized yellow condensers. These condensers hold energy and have their capabilities written on the outside of them. The 0-51445 has many other pieces that assist it to function including diodes, resistors, smaller capacitors, transistors, and five large variable resistors also called potentiometers. Every piece is laid out in a grid pattern that is printed on the circuit board. The grid is labeled on the left using the alphabet A through Z and the double letters like AA the AB only changing the second letter to the one that follows until the grid is labeled. The last set of letters is AL. Across the top it is labeled using numbers that increase by fives starting at zero and ending with fifty-five. These marking are used to insert the circuit board into its proper place within a drive. The variable resistor is used to control the energy flow for the circuit board. Each variable resistor has its own controls. The circuit board has various labels on the surface including the part number 0-51445, AMPLIFIER, I. E. T., EMITTER FOLLOWERS, and CONTROLLER.

If you would like to find out more about the 0-51445 please seek the assistance of the staff at AX Control. Your one-stop shop for the hard to find products.

","meta_title":"Emitter Follower Controller Board","meta_description":"Emitter Follower Controller Board","keywords":"Emitter Follower Controller Board","series_page_description":"Emitter Follower Controller Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 09:43:50","prod_pdf":[{"id":59,"product_id":8897,"pdf_id":15580,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15580,"pdf_type_id":1,"file_name":"0-51445.pdf","title_tag":"Emitter Follower Controller Board","alt_tag":"Emitter Follower Controller Board","created_at":null,"updated_at":null}}]},{"id":9096,"part_number":"0-51445-A","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Emitter Follower Circuit Board","short_desc":null,"content":"

Reliance Electric is the maker of the 0-51445-A. The circuit board has three circular style transistors with a silver colored cap. The circuit board has several titles printed on the surface of the circuit board such as I. E. T., CONTROLLER, AMPLIFIER, EMITTER FOLLOWER and the part number 0-51445-A. The circuit board has five large metal variable resistors. The variable resistors are on the front of the circuit board and can be controlled by turning a small post that sticks out. These can be adjusted individually and are not reliant on each other. These variable resistors are similar in the sense of volume control. Turn the knob to the left the energy allowed through becomes smaller, turn the knob to the right and the circuit becomes wide open allowing a lot of energy through. The circuit board can connect up to twenty-six wires to the outside of the circuit board using the twenty-six metal tabs around the outside of the circuit board. To connect the wires a special style wire end is needed it is a metal sleeve that is attached to the end of the wire then crimped onto the metal tab. The circuit board uses a mass of other items to assist it in functions such as diodes, resistors, various sized (small to large) condensers.

The staff at AX Control is here to further assist you. We ship each of our circuit boards in an anti-static sleeve to prevent an electrical discharge as well as additional padding to ensure safe fast shipping.

","meta_title":"Emitter Follower Circuit Board","meta_description":"Emitter Follower Circuit Board","keywords":"Emitter Follower Circuit Board","series_page_description":"Emitter Follower Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 12:35:38","prod_pdf":[{"id":57,"product_id":9096,"pdf_id":15581,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15581,"pdf_type_id":1,"file_name":"0-51445-A.pdf","title_tag":"Emitter Follower Circuit Board","alt_tag":"Emitter Follower Circuit Board","created_at":null,"updated_at":null}}]},{"id":8898,"part_number":"0-51446","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Amplifier Circuit Card","short_desc":null,"content":"

The 0-51446 is an amplifier card from Reliance Electric. The circuit board is a wide circuit board. The left edge is labeled with twenty-four letters (A through Z) and thirteen double letters (AA through AN (with the second letter changing to the next letter in the alphabet)). The top is lined zero through fifty-five with five increment spaces, like most of the circuit boards by Reliance. This particular circuit board is sparse as far as pieces that make it function. There are two yellow colored extra secured condensers, six regular sized condensers (a mix between yellow and gray in color), six smaller red colored condensers, and a single red-orange circular shaped condenser. There are also diodes, transformers, and resistors. There is a small bracket toward the lower edge next to a black transformer, there is another bracket alone on the bottom right edge of the circuit board and a third bracket towards the top edge of the circuit board at the grid line labeled fifty. There is also a large white LED light secured to the lower edge of the circuit board with an angled metal bracket. Next to the large LED light is an equally large red colored circular button that is also secured to the lower edge of the circuit board with an angled metal bracket. The circuit board surface also has the following labels on the surface, SUMMING, INPUT AMPLIFIER, and INSTANTANEOUS ELECTRONIC TRIP.

Reach out to AX Control’s professional staff to order yours 0-51446 today.

","meta_title":"Amplifier Circuit Card","meta_description":"Amplifier Circuit Card","keywords":"Amplifier Circuit Card","series_page_description":"Amplifier Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 10:02:34","prod_pdf":[{"id":55,"product_id":8898,"pdf_id":15582,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15582,"pdf_type_id":1,"file_name":"0-51446.pdf","title_tag":"Amplifier Circuit Card","alt_tag":"Amplifier Circuit Card","created_at":null,"updated_at":null}}]},{"id":9098,"part_number":"0-51476-30","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Voltmeter Kit","short_desc":null,"content":"

The 0-51476-30 module is a voltmeter circuit board that was designed and produced by Reliance Electric to be installed with their various drive systems. The 0-51476-30 voltmeter board is regularly found within our stock, so be sure to call and check on its availability if you are in need of one. Our sales representatives are able to assist you with any concerns or questions that you may have.

A voltmeter is an instrument that is meant to be used to measure the difference in electrical potential from any two points within an electric circuit. This 0-51476-30 voltmeter board is meant to fulfill that purpose within the Reliance Electric drives.

The 0-51476-30 voltmeter board is a square board which has a grid printed throughout the surface of it. The top of this grid is labeled from 0 to 25 in multiples of 5. The left side is labeled using the letters A through AA. In the top left of this grid, there is a small dial where the maximum setting is 10 and the minimum is 0. The right of the grid has a large resistor and there is a much smaller resistor below it. At the bottom of the grid, there is a large terminal block with two terminals at the top, which are labeled as “419” and “519.” Surrounding this particular terminal block, you will find four small capacitors. In the middle of the 0-51476-30 voltmeter board, there are two medium sized holes.

The 0-51476-30 voltmeter board has a total weight of 0.18 lbs. or 0.082 kg.

","meta_title":"Reliance Electric Voltmeter Kit","meta_description":"Reliance Electric Voltmeter Kit","keywords":"Reliance Electric Voltmeter Kit","series_page_description":"Reliance Electric Voltmeter Kit","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-23 08:06:23","prod_pdf":[{"id":56,"product_id":9098,"pdf_id":15583,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15583,"pdf_type_id":1,"file_name":"0-51476-30.pdf","title_tag":"Reliance Electric Voltmeter Kit","alt_tag":"Reliance Electric Voltmeter Kit","created_at":null,"updated_at":null}}]},{"id":9103,"part_number":"0-51476-31","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Frequency Meter Calibrator Board","short_desc":null,"content":"

The 0-51476-31 is a Frequency Meter Calibrator Board produced by Reliance Electric. This card has four signal diodes and two orange and black Zenner style diodes. The 0-51476-31 card uses six light blue carbon film style resistors, two mauve carbon film style resistors, a large circular orange varistor style resistor, a small blue trimmer style variable resistor, and five fusible resistors that are half white and half red with there capability marked on the outside. The 0-51476-31 has two polypropylene capacitors with there limits printed on the outside, along with a small polyester style capacitor and a small PCB mount electrolytic capacitor. The calibrator board uses a single integrated circuit to store all of its programming details. The 0-51476-31 card features a large transformer in one corner. This transformer is reinforced to the circuit board using a zip tie. The transformer has a black wire and a dark blue wire coming out of it. These wires are then connected to the black connection port on the opposite edge of the card and secured using an eye hook connector on the end of each wire and a screw. There are two gray wires also connected to the port using eye hook connectors and screws. To secure the 0-51476-31 card in place using the two holes drilled in the very center of the card. Each part is individually labeled with a letter and a number. The card also features the part number 0-51476-31 printed on it with Reliance Electrics company logo, on the edge near the transformer.

","meta_title":"Frequency Meter Calibrator Board","meta_description":"Frequency Meter Calibrator Board","keywords":"Frequency Meter Calibrator Board","series_page_description":"Frequency Meter Calibrator Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 12:48:14","prod_pdf":[{"id":54,"product_id":9103,"pdf_id":15584,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15584,"pdf_type_id":1,"file_name":"0-51476-31.pdf","title_tag":"Frequency Meter Calibrator Board","alt_tag":"Frequency Meter Calibrator Board","created_at":null,"updated_at":null}}]},{"id":8899,"part_number":"0-51476-35","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":11,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"AC Ammeter Printer Circuit","short_desc":"","content":null,"meta_title":"AC Ammeter Printer Circuit","meta_description":"AC Ammeter Printer Circuit","keywords":"AC Ammeter Printer Circuit","series_page_description":"AC Ammeter Printer Circuit","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3180,"product_id":8899,"pdf_id":14223,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14223,"pdf_type_id":1,"file_name":"0-51476-35.pdf","title_tag":"AC Ammeter Printer Circuit | PDF","alt_tag":"AC Ammeter Printer Circuit | PDF","created_at":null,"updated_at":null}}]},{"id":9104,"part_number":"0-51476-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"I/O PC Module Board","short_desc":null,"content":"

The 0-51476-4 is an I/O printed circuit board that was produced by Reliance Electric. Over the years the Reliance Electric company changed hands and became known as the ABB or Asea Brown Boveri company. The ABB company also produced these circuit boards and the part numbers are the same. However, the 0-51476-4 is no longer being made and is considered to be an obsolete part. The 0-51476-4 circuit board is rather small but holds a lot of components. The card features a female style connection terminal on the left edge. This female connection terminal uses four screws to attach and secure wires with eye hook connection ends to the card. The 0-51476-4 has a small variable resistor called a trimmer. The trimmer is an adjustable resistor with a rotating center. The card also uses a variety of carbon composite resistors, varistor resistors, carbon film resistors, and fusible style resistors. The I/O printed card also stores energy using polyester capacitors, PCB mount electrolytic capacitors, and polypropylene capacitors. The 0-51476-4 also has a large transformer, to allow the 0-51476-4 to communicate and share current with surrounding circuit boards. The 0-51476-4 uses traces, signal diodes, and Zenner diodes to move the electrical current around the circuit board. The 0-51476-4’s processes are all controlled and stored in the single integrated circuit on the lower edge of the card. To learn how to install the 0-51476-4 refer to the Reliance Electric instruction manuals and data sheets.

To order the 0-51476-4 circuit board please call or email the staff at AX Control.

","meta_title":"I/O PC Module Board","meta_description":"I/O PC Module Board","keywords":"I/O PC Module Board","series_page_description":"I/O PC Module Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 13:36:53","prod_pdf":[{"id":52,"product_id":9104,"pdf_id":15585,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15585,"pdf_type_id":1,"file_name":"0-51476-4.pdf","title_tag":"I/O PC Module Board","alt_tag":"I/O PC Module Board","created_at":null,"updated_at":null}}]},{"id":9105,"part_number":"0-51476-41","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PCB Ammeter Kit","short_desc":null,"content":"

The 0-51476-41 is a printed circuit board ammeter kit card formally made by Reliance Electric, also referred to in later years as ABB (Asea Brown Boveri) when the company was bought out. Regardless of the company name the part numbers, the function and purpose of the 0-51476-41 card remain the same. Keep in mind that the 0-51476-41 is no longer in production. This ammeter kit is tiny and does not have many pieces to make it work. The pieces on this card are laid out in a grid pattern. The card has four black and silver signal diodes, to direct energy flow. The 0-51476-41 has an adjustable component called a trimmer variable resistor. This trimmer resistor adjusts using a center dial with a slit in it. The 0-51476-41 also has two other resistors called linear resistors, that are fixed and cannot be altered. There is also a two-point connection terminal that is female on the opposite edge of the card from the trimer resistor.

Call or email AX Control to place an order for the 0-51476-41 ammeter kit card today.

","meta_title":"PCB Ammeter Kit","meta_description":"PCB Ammeter Kit","keywords":"PCB Ammeter Kit","series_page_description":"PCB Ammeter Kit","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 13:12:48","prod_pdf":[{"id":53,"product_id":9105,"pdf_id":15586,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15586,"pdf_type_id":1,"file_name":"0-51476-41.pdf","title_tag":"PCB Ammeter Kit","alt_tag":"PCB Ammeter Kit","created_at":null,"updated_at":null}}]},{"id":9100,"part_number":"0-51476-42","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Printed Output Frequency Card","short_desc":null,"content":"

The 0-51476-42 is a printed output frequency card manufactured by Reliance Electric. The 0-51476-42 card is small in size; however, it contains a great deal of components. On one side there is a four opening screw port that contains four wires with red connector ends. The output card also has a large transformer on the opposite edge. The 0-51476-42 card has a single integrated circuit next to the transformer. The card uses several capacitors of different sizes and styles. Each having a different energy capacity. The 0-51476-42 also has a variety of different resistors, whether linear carbon composition resistors, varistor resistors or fusible style resistors. Each has its own capabilities. The fusible resistors and varistor resistors have their capabilities written on them while the carbon composition resistors need a color code that corresponds with a different colored strip and also requires an equation to determine their abilities. The 0-51476-42 also has diodes used to direct energy flow. Each piece is labeled, and the card does have the part number (0-51476-42) printed on the edge. Refer to data sheets and instruction manuals by Reliance Electric to find out more.

To purchase the 0-51476-42 call or email the courteous staff at AX Control by phone or by email.

","meta_title":"Printed Output Frequency Card","meta_description":"Printed Output Frequency Card","keywords":"Printed Output Frequency Card","series_page_description":"Printed Output Frequency Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 12:31:55","prod_pdf":[{"id":51,"product_id":9100,"pdf_id":15587,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15587,"pdf_type_id":1,"file_name":"0-51476-42.pdf","title_tag":"Printed Output Frequency Card","alt_tag":"Printed Output Frequency Card","created_at":null,"updated_at":null}}]},{"id":9097,"part_number":"0-51476-47","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric PC Board","short_desc":null,"content":"

The 0-51476-47 is a replacement PC Board created by Reliance Electric. This board may have been sold by Baldor Reliance and Asea Brown Boveri depending on what year it was being mass-produced.

The 0-51476-47 is PC Board for Kit Model 34C419 which is an Ammeter Kit used on various Reliance Electric Three-Phase Input AC V*S Drives. The Ammeter kit typically comes with a NEMA rated enclosure, an ammeter, a current transformer, and a pc board. This part number represents just the PC Board.

The 0-51476-47 features two large holes in the center of it that are used to secure the card into place. On the other side of the holes is a diode and two large blue resistors. This card is laid out in a grid pattern.

This kit has a potentiometer in the top left corner that is used for calibration. Typically calibration is already factory set and should not be needed, but if it is needed then you can set the drive to 60hZ. Once you have done that, you can then use a clamp-on test ammeter on the motor that leads to a current transformer. This board also has a terminal strip on the bottom edge of the card.

For more information about the 0-51476-47 PC Board and the ammeter kit it goes with, please refer to the Reliance Electric Instruction Sheet, D-3092-3.

AX Control asks that you call us directly for the availability of this product. If we have it in stock, then we can give you an official price quote and discuss shipping options with you.

","meta_title":"Reliance Electric PC Board","meta_description":"Reliance Electric PC Board","keywords":"Reliance Electric PC Board","series_page_description":"Reliance Electric PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-25 13:27:35","prod_pdf":[{"id":49,"product_id":9097,"pdf_id":15588,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15588,"pdf_type_id":1,"file_name":"0-51476-47.pdf","title_tag":"Reliance Electric PC Board","alt_tag":"Reliance Electric PC Board","created_at":null,"updated_at":null}}]},{"id":9099,"part_number":"0-51476-49","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Dual Connection PC Board","short_desc":null,"content":"

The 0-51476-49 is a voltmeter printed circuit board that was developed and distributed by Reliance Electric, although it was also manufactured under the company names Baldor Reliance and Asea Brown Boveri. Despite the fact that the 0-51476-49 voltmeter board is no longer supported or offered new by Reliance Electric, AX Control regularly has the 0-51476-49 voltmeter board in stock. Email or call AX Control any time between 8:00 a.m. and 5:00 p.m. to talk to one of our sales representatives.

A voltmeter is an instrument that is used to measure the electrical potential difference between any two points within an electric circuit. The 0-51476-49 voltmeter board is meant to fulfill this purpose within Reliance Electric drive systems.

The 0-51476-49 voltmeter board is very small and has very few components placed on it. At the top of the 0-51476-49 voltmeter board, you will see its product number printed in white text. Below that, there are two holes. The hole on the left has a plus sign printed next to it and is circular, while the hole on the right is ovular. Below these holes, there are two resistors that are suspended over the board using through-hole mounting. Below these resistors, there is a small, square shaped potentiometer. In the bottom corners of the 0-51476-49 voltmeter board, there is a screw in each. These screws are surrounded by a metal piece that keeps them secure to the board.

The 0-51476-49 voltmeter board weighs about 0.03 lbs. or 0.014 kg., which does not include any packaging materials.

","meta_title":"Dual Connection PC Board","meta_description":"Dual Connection PC Board","keywords":"Dual Connection PC Board","series_page_description":"Dual Connection PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-20 08:17:28","prod_pdf":[{"id":50,"product_id":9099,"pdf_id":15589,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15589,"pdf_type_id":1,"file_name":"0-51476-49.pdf","title_tag":"Dual Connection PC Board","alt_tag":"Dual Connection PC Board","created_at":null,"updated_at":null}}]},{"id":9101,"part_number":"0-51476-66","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric PC Board","short_desc":"","content":null,"meta_title":"Reliance Electric PC Board","meta_description":"Reliance Electric PC Board","keywords":"Reliance Electric PC Board","series_page_description":"Reliance Electric PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":47,"product_id":9101,"pdf_id":15590,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15590,"pdf_type_id":1,"file_name":"0-51476-66.pdf","title_tag":"Reliance Electric PC Board","alt_tag":"Reliance Electric PC Board","created_at":null,"updated_at":null}}]},{"id":17769,"part_number":"0-51486-24","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD","short_desc":null,"content":"

The 0-51486-24 is a printed circuit board created by Reliance Electric. The 0-51486-24 has two small transformers that have 69743-4A, 40-9101 written across the metal support beam in the center. There is a large transformer on the circuit board as well with the markings TR-10218, 64977 56 R, written across the metal support beam that runs across the center. There is also a large gray amplifying tower. The 0-51486-24 has fifteen metal screw brackets around the edges of the circuit board (ten on the left edge and five on the right edge). The 0-51486-24 has four circular transistors ranging from super tiny to large. The 0-51486-24 has two black thick film resistors, six light pink fusible resistors, two pink and two dark blue linear resistors. The 0-51486-24 card has eight signal diodes (silver and black). The card also has five yellow polypropylene capacitors and two metal encased capacitors (one small and bronze in color, the other is large and light blue in color). The 0-51486-24 has various surface wires along with red and blue wires coming out of both the small transformers and two large black wires connected to the amplifying tower. The other transformer has a pale green wire, a red wire, a yellow wire, an orange wire, a dark brown wire, a pale blue wire, and a black wire coming from it and connecting to various points on the circuit board. The 0-51486-24 also has four large outlined open spaces to on the top edge and two on the bottom edge.

","meta_title":"RELIANCE ELECTRIC PC BOARD","meta_description":"RELIANCE ELECTRIC PC BOARD","keywords":"RELIANCE ELECTRIC PC BOARD","series_page_description":"RELIANCE ELECTRIC PC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-17 11:40:17","prod_pdf":[]},{"id":17774,"part_number":"0-51486-39","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC BOARD","short_desc":null,"content":"

The 0-51486-39 is a small circuit board manufactured by Reliance Electric. The 0-51486-39 features nine terminal screws around the edges of the circuit board. The left side has five, the upper edge has two, and the right edge has the final two. The 0-51486-39 has two large capacitors on the lower edge of the card. There are two small transistors, two fusible resistors, and ten fixed linear resistors. At the top edge of the 0-51486-39, there are two variable resistors that have an adjustment screw in the center of a black cylinder. The other half of the variable resistor is underneath the circuit board. These variable resistors are labeled Current Limit and Max Speed. Since the 0-51486-39 has large parts connected to the back of it this card needs to have space to accommodate those parts when installed. For additional details refer to the reference manuals from Reliance Electric.

To place an order, you can either call or email AX Control.

","meta_title":"RELIANCE ELECTRIC BOARD","meta_description":"RELIANCE ELECTRIC BOARD","keywords":"RELIANCE ELECTRIC BOARD","series_page_description":"RELIANCE ELECTRIC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-24 09:53:39","prod_pdf":[]},{"id":17775,"part_number":"0-51486-56","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD ETR 14PIN","short_desc":null,"content":"

The 0-51486-56 is a PC Board ETR Card produced by Reliance Electric. It was mass-produced by ASEA BROWN BOVERI and Baldor Reliance. It is a 5 amp and 24 VDC card. It is also classified as a DC relay card. This product has been discontinued by the manufacturer and is considered to be obsolete. You can also find this part under the O-51486-56 Baldor Reliance part number.

This small card is made up of a single small circuit board (which can be green, blue, or yellow depending on when it was produced) and has a single power relay in the center of it. The relay is an electrical switch that uses electromagnets to open and close connections. The switch is typically either open or closed. It is covered with a removable dust cover to prevent any interference of the electromagnet. The circuit board is labeled with the product number in the top left corner. The 0-51486-56 is typically mounted in place using the two metallic side pins and four screws which are attached to four metal brackets. The metallic brackets are labeled 9,13,12, and 14 respectively.

AX Control feels that customer satisfaction is our top priority. If you need help with ordering, please feel free to contact us via phone or email with any questions you have. One of our knowledgeable staff members will get back to you in a timely manner. If we don’t have something in stock, please check with us, we do offer quick repairs on a large variety of products.

","meta_title":"RELIANCE ELECTRIC PC BOARD ETR 14PIN","meta_description":"RELIANCE ELECTRIC PC BOARD ETR 14PIN","keywords":"RELIANCE ELECTRIC PC BOARD ETR 14PIN","series_page_description":"RELIANCE ELECTRIC PC BOARD ETR 14PIN","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-08-28 10:52:25","prod_pdf":[]},{"id":8900,"part_number":"0-51487-1A","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Control Board","short_desc":"","content":null,"meta_title":"PC Control Board","meta_description":"PC Control Board","keywords":"PC Control Board","series_page_description":"PC Control Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":48,"product_id":8900,"pdf_id":15591,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15591,"pdf_type_id":1,"file_name":"0-51487-1A.pdf","title_tag":"PC Control Board","alt_tag":"PC Control Board","created_at":null,"updated_at":null}}]},{"id":9108,"part_number":"0-51487-26","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Drive Board","short_desc":"","content":null,"meta_title":"Reliance Electric Drive Board","meta_description":"Reliance Electric Drive Board","keywords":"Reliance Electric Drive Board","series_page_description":"Reliance Electric Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":46,"product_id":9108,"pdf_id":15592,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15592,"pdf_type_id":1,"file_name":"0-51487-26.pdf","title_tag":"Reliance Electric Drive Board","alt_tag":"Reliance Electric Drive Board","created_at":null,"updated_at":null}}]},{"id":9106,"part_number":"0-51487-9A","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC JR Drive Board","short_desc":"","content":null,"meta_title":"PC JR Drive Board","meta_description":"PC JR Drive Board","keywords":"PC JR Drive Board","series_page_description":"PC JR Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":44,"product_id":9106,"pdf_id":15593,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15593,"pdf_type_id":1,"file_name":"0-51487-9A.pdf","title_tag":"PC JR Drive Board","alt_tag":"PC JR Drive Board","created_at":null,"updated_at":null}}]},{"id":9107,"part_number":"0-51487-A","revision_type_id":1,"series_id":74,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VS JR Printed Circuit Board","short_desc":"","content":null,"meta_title":"VS JR Printed Circuit Board","meta_description":"VS JR Printed Circuit Board","keywords":"VS JR Printed Circuit Board","series_page_description":"VS JR Printed Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":45,"product_id":9107,"pdf_id":15594,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15594,"pdf_type_id":1,"file_name":"0-51487-A.pdf","title_tag":"VS JR Printed Circuit Board","alt_tag":"VS JR Printed Circuit Board","created_at":null,"updated_at":null}}]},{"id":8901,"part_number":"0-51668-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Process Control Interface Board","short_desc":null,"content":"

Reliance Electric is the producer of the 0-51668-1 Process Control Interface Board. This is a larger circuit board that uses numbers to label the length of the circuit board going from zero to eighty-five if increments of five with smaller hash marks in between the larger labeled numbers. These small hash marks represent a measurement of one. The top of the circuit board is labeled using the alphabet A through Z then double letters AA (then changing the second letter to go through the alphabet) then going to double letters BA (then changing the second letter to go through the alphabet). The circuit board has a very large transformer on the top right corner of the circuit board. The transformer has a red wire, a yellow wire, and a black wire coming off of it. There is a considerably smaller transformer toward the center of the circuit board. The circuit board has eight blue wired ended electrolytic capacitors that vary in size from large to small. There are various sized (large to small) orange circular capacitors. There are three tiny transformers and two slightly larger transformers. There are two transformers with a black fan style enclosure. There are a handful of integrated circuits throughout the circuit board. There is also a blue variable resistor mounted on an attachment to the circuit board toward the bottom right corner.

Allow the professional staff of AX Control to guide you to the correct circuit board for the perfect price with shipping options that work for you.

","meta_title":"Process Control Interface Board","meta_description":"Process Control Interface Board","keywords":"Process Control Interface Board","series_page_description":"Process Control Interface Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 10:20:06","prod_pdf":[{"id":586,"product_id":8901,"pdf_id":15595,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15595,"pdf_type_id":1,"file_name":"0-51668-1.pdf","title_tag":"Process Control Interface Board","alt_tag":"Process Control Interface Board","created_at":null,"updated_at":null}}]},{"id":8902,"part_number":"0-51801","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PDMA Circuit Board","short_desc":null,"content":"

The 0-51801 is a PDMA circuit board by Reliance Eclectic. The front of this circuit board is labeled PDMA in the top left edge. Next to the PDMA is a large borehole for a screw anchor to secure the circuit board. There is an LED light labeled “a” on the left a 2’ on the right. Below this light is a switch that moves up and down labeled “a” on the left and RUN / BYP on the right. Below this is a second LED light labeled “b” on the left and 2’ on the right. Below this light is a switch that moves up and down labeled “b” on the left and RUN / BYP on the right. Below that switch is the part number 0-51801, and below that is another screw anchor to secure the circuit board. The circuit board section has five rows of six integrated circuits that are all evenly spaced. These integrated circuits hold various programs that are used to assist the circuit board in performing its various functions and some may be reprogrammed if necessary. The circuit board has twenty circular pale orange capacitors. The circuit board also has eleven resistors spread across the circuit board. There is a small black transformer in the top left corner of the circuit board. The top edge of the circuit board is labeled five through eighty while the edge connected to the faceplate is labeled A through Z and AA through AZ the BA through BD.

Email or call AX Control to order today.

","meta_title":"PDMA Circuit Board","meta_description":"PDMA Circuit Board","keywords":"PDMA Circuit Board","series_page_description":"PDMA Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 10:36:48","prod_pdf":[{"id":25,"product_id":8902,"pdf_id":15596,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15596,"pdf_type_id":1,"file_name":"0-51801.pdf","title_tag":"PDMA Circuit Board","alt_tag":"PDMA Circuit Board","created_at":null,"updated_at":null}}]},{"id":16309,"part_number":"0-51802-2","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC BI-DIR DECADE COUNTER","short_desc":null,"content":"

0-51802-2 Bi-Directional Decade Counter

The 0-51802-2 is a Bi-Directional Decade Counter manufactured by Reliance Electric for use within the company’s various drives.

The 0-51802-2 is designed with an empty front faceplate that is marked with the board number. The faceplate has a set screw located at the top and the bottom of the panel. These screws are used to lock the panel safely in place once it is put into place within a rack system.

The circuit board component of the 0-51802-2 is printed with a grid pattern. This pattern replaces reference designators, which are not used on this particular board. Components on this circuit board include transistors, integrated circuits, metal film resistors, ceramic capacitors, diodes, and disk capacitors. Some of these components are marked with their original manufacturer codes. The rear of the circuit board extends in a conductive backplane connector. The board is marked on its back surface with additional codes and information, and on the bottom edge with the board id.

For more detailed information about this board, please refer to technical support publications from Reliance like user guides and product manuals. Some of these publications may be available through other manufacturers, including Baldor-Reliance.

AX Control offers some of the fastest shipping service available on in-stock parts. We also offer economical ground service if that better meets your needs. We are also happy to work with your personal courier service in an emergency downtime situation. Talk to your sales representative for more information.

","meta_title":"RELIANCE ELECTRIC BI-DIR DECADE COUNTER","meta_description":"RELIANCE ELECTRIC BI-DIR DECADE COUNTER","keywords":"RELIANCE ELECTRIC BI-DIR DECADE COUNTER","series_page_description":"RELIANCE ELECTRIC BI-DIR DECADE COUNTER","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-30 13:08:48","prod_pdf":[]},{"id":8903,"part_number":"0-51811-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":11,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Voltage Test Module","short_desc":null,"content":"

The 0-51811-1 is a TSTB Control board by Reliance. The circuit board has a faceplate labeled TSTB across the top. Below that is a DC Voltage meter on the bottom left it says type and, on the bottom, right it says DW-90. The center of the meter is zero. Below the DC Voltage meter is a variable resistor. The numbers around the knob of the variable resistor go from one to twelve. Then there is a line that links numbers seven through eleven and on the inside of that line are more numbers 1.5, 6, 16, and 60. On the bottom left under the variable resistor is says SCALE (+) on the bottom right under the variable resistor is says TEST (-). In the center of these two words is a toggle switch. Under the toggle switch is another variable resistor with a black dial. This time the numbers are printed on the dial. The variable resistor is labeled Test Signal. Below this variable resistor is two eye hooks. The left eye hook is labeled Output and the right eye hook is labeled Common. At the top and bottom of this circuit board is the screw in anchors that secure it into place. The circuit board attached to the faceplate has three red colored pieces, four green colored pieces, and two black colored pieces. All of these are along the top edge of the circuit board. The rest of the circuit board is filled with all the wires that are connected to the DC voltage meter, the toggle switch and the two variable resistor knobs.

","meta_title":"Voltage Test Module","meta_description":"Voltage Test Module","keywords":"Voltage Test Module","series_page_description":"Voltage Test Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 10:53:48","prod_pdf":[{"id":3179,"product_id":8903,"pdf_id":14227,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14227,"pdf_type_id":1,"file_name":"0-51811-1.pdf","title_tag":"Voltage Test Module | PDF","alt_tag":"Voltage Test Module | PDF","created_at":null,"updated_at":null}}]},{"id":9109,"part_number":"0-51811-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Tester Card","short_desc":null,"content":"

The 0-51811-3 is manufactured by Reliance Electric as a tester card. The circuit board itself is pretty bare and only has the following pieces on it: the 0-51811-3 has two integrated circuits, three peach colored fusible resistors, thirteen carbon composition resistors, a varistor resistor, a small transistor, a large silver polystyrene capacitor, six signal diodes, and a large transformer, along with a large bundle of wires that come from all the components on the front panel. The 0-51811-3 card does have some open spaces with connection points already in place to add additional components should it be needed. This tester card does use a grid pattern across the surface. Measured zero through eighty across the length and A through Z, AA through AZ, then BA through BD. The front panel has a large voltage meter at the top. Below the voltage-meter is a dual turning black colored knob. The lower part of the knob has a fin that is used to leave at the chosen pace, the upper section of the knob is white with a black line to leave at that chosen pace. Around the knob is labeled one, two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve. Between the numbers five and six starts a line that is labeled one through five and ends between the numbers nine and ten. Under this knob is a toggle switch labeled SCALE + on the left and Test – on the right. There is also a small knob labeled TEST SIGNAL and around the knob is marked zero, four, six, eight, and ten. There are also two off-white plastic plates with a total of four metal hooks on them.

Call AX Control to order yours.

","meta_title":"PC Tester Card","meta_description":"PC Tester Card","keywords":"PC Tester Card","series_page_description":"PC Tester Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 12:40:36","prod_pdf":[{"id":26,"product_id":9109,"pdf_id":15597,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15597,"pdf_type_id":1,"file_name":"0-51811-3.pdf","title_tag":"PC Tester Card","alt_tag":"PC Tester Card","created_at":null,"updated_at":null}}]},{"id":9111,"part_number":"0-51811-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CPU Circuit Board","short_desc":null,"content":"

Reliance Electric is the maker of the 0-51811-4 TSTE Test Card. The TSTE card has a face panel with eight black buttons running down the length. The black buttons are split into two groups, the first four buttons are grouped under the label A Channel and are individually labeled A8, A4, A2, and A1. The lower four buttons are grouped under the label B Channel and are individually labeled B8, B4, B2, and B1. Each button has a slid that is on the other side of the front panel. The A8 button has a small slide with six small hooks (three on each side), the A4 button also has a small slide with six hooks (three on each side), the A2 button has a longer slide with twelve hooks (six on each side), the A1 button has the longest slide with twenty-four hooks (twelve on each side), the B8 button has a short slide with six hooks (three on each side), the B4 button also has a short slide with six hooks (three on each side), and the B1 button has the same slide has the A1 button with twenty-four hooks (twelve on each side). Underneath the buttons are five white prongs with circular metal tops. They are individually labeled A, B, COM, S1, and S2. Below the prongs is a metal circle labeled ILI. Below that circle is the part number of the card 0-51811-4 and Reliance Electrics logo. The 0-51811-4 card also uses integrated circuits, capacitors, transistors, resistors and diodes to serve its purpose.

","meta_title":"CPU Circuit Board","meta_description":"CPU Circuit Board","keywords":"CPU Circuit Board","series_page_description":"CPU Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 10:45:35","prod_pdf":[{"id":27,"product_id":9111,"pdf_id":15598,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15598,"pdf_type_id":1,"file_name":"0-51811-4.pdf","title_tag":"CPU Circuit Board","alt_tag":"CPU Circuit Board","created_at":null,"updated_at":null}}]},{"id":9110,"part_number":"0-51811-5","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Tester","short_desc":null,"content":"

The 0-51811-5 is a TSTF tester card created by Reliance Electric. The 0-51811-5 has seven integrated circuits, thirty peach colored fixed resistors, three carbon film resistors, two light brown varistor resistors (they are the circular shaped ones), eight polyester capacitors, a polypropylene capacitor, a transistor, and a large wrapped induction coil. The tester card is about ten and a half inches long and just under nine inches wide and the surface of the test card is mapped out as a grid. The upper edge is marked zero to eighty and is spaced in increments of five with small hash lines to represent the smaller numbers between the printed numbers. The TSTF tester card is then split down the center and marked with letters. Each letter goes only left or only right. For example, line B is on the left of the card and not on the right side of the card, or Line C is only on the right side of the card and not the left side. The front panel that is attached to the circuit board has eight small black buttons. The buttons are attached to clear trays with orange edges and golden hooks. The tray for each button is different. The first, second, fifth and sixth button has a short tray with six small golden hooks, while the third and seventh button has slightly longer trays, with twelve golden hooks and the fourth and eighth buttons have the longest trays with twenty-four golden hooks. The front panel also has five white and silver connectors.

","meta_title":"PC Board Tester","meta_description":"PC Board Tester","keywords":"PC Board Tester","series_page_description":"PC Board Tester","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 10:25:33","prod_pdf":[{"id":24,"product_id":9110,"pdf_id":15599,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15599,"pdf_type_id":1,"file_name":"0-51811-5.pdf","title_tag":"PC Board Tester","alt_tag":"PC Board Tester","created_at":null,"updated_at":null}}]},{"id":8904,"part_number":"0-51811-7","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Tester Card","short_desc":null,"content":"

The 0-51811-7 is a TSTH circuit board made by Reliance Electric. The face of this circuit board has a fifteen-port connector with two ports on the side of the connector to secure the cord in place. Underneath this connection point, there are two gray metal tabs under the word TEST. The metal tab on the left is labeled + and the metal tab on the right is labeled -. These tabs have an inclusive marking underneath that connects them with a series of black buttons labeled as a whole as TEST POINTS. Each individual button also has a label A1, A2, A4, A8. There are two more metal tabs under the word OUTPUT. These metal tabs have an inclusive mark as well and go to a section of two white buttons labeled as a whole SCOPE. The individual buttons are labeled B1 and B2. Below these buttons is a small variable resistor with a small white arrow on it. Around this variable resistor are the numbers zero (0), two (2), four (4), six (6), eight (8), and ten (10). Next to the variable resistor is a toggle switch labeled TEST SIGNAL. On the left side of the switch is a plus sign (+) and on the right side of the switch is a minus sign (-). At the bottom is the circuit boards part number 0-51811-7. Behind the faceplate is the circuit board itself. This circuit board has many pieces including transformers, resistors, transformers, microchips, metal pins, among many others.

Allow AX Control to be your first choice.

","meta_title":"PC Board Tester Card","meta_description":"PC Board Tester Card","keywords":"PC Board Tester Card","series_page_description":"PC Board Tester Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 11:07:10","prod_pdf":[{"id":21,"product_id":8904,"pdf_id":15600,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15600,"pdf_type_id":1,"file_name":"0-51811-7.pdf","title_tag":"PC Board Tester Card","alt_tag":"PC Board Tester Card","created_at":null,"updated_at":null}}]},{"id":16308,"part_number":"0-51814-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC VOLTAGE CONVERTER BOARD","short_desc":null,"content":"

0-51814-4 Reliance Voltage Converter Board

The 0-51814-4 is a board from Reliance Electric. This board functions as a Voltage converter board.

The 0-51814-4 is composed of a front faceplate with an attached circuit board. The faceplate has a two-position terminal strip with a cover placed on its lower quarter. Each of these terminals is wired into the surface of the circuit board. The faceplate also has two set screws for locking the module into place within a rack system.

The board portion of the 0-51814-4 has an extending back tab covered in a conductive material that functions as a backplane connector. The board is covered in a grid pattern that is numbered on one axis and lettered on the other. Components include four transistors, sixteen disk capacitors, diodes, metal film resistors, carbon composite resistors, terminal pins, stab-on connectors, surface wiring, ceramic capacitors, and seven integrated circuits. Board components are sometimes marked with their original manufacturing codes, but reference designators are not used on the board. The rear surface of the board is imprinted with several additional pieces of information.

Please refer to data sheets or product manuals for more information regarding the operation of this board component. While technical support was originally provided by Reliance Electric, technical support products for the 0-51814-4 may now be available through Reliance, Asea Brown Boveri, or Baldor-Reliance.

AX Control is a leading supplier of after-market industrial automation products. We maintain a large inventory of on-hand products ready to ship to you from manufacturers like Fuji, GE, and Eurotherm.

","meta_title":"RELIANCE ELECTRIC VOLTAGE CONVERTER BOARD","meta_description":"RELIANCE ELECTRIC VOLTAGE CONVERTER BOARD","keywords":"RELIANCE ELECTRIC VOLTAGE CONVERTER BOARD","series_page_description":"RELIANCE ELECTRIC VOLTAGE CONVERTER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-30 13:06:47","prod_pdf":[]},{"id":8905,"part_number":"0-51820-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Pulse Driver PC Board","short_desc":null,"content":"

Reliance Electric is the maker of the 0-51820-1 Pulse Driver PC Board. The front of this circuit board has twelve metal screws that are split by metal divides. The inside of this circuit board has twelve metal tabs right behind the faceplate followed by a row of six red square components. There are eight orange and black diodes behind the red blocks. Then there are four small transformers behind that followed by twelve resistors. Behind that are four black transformers followed by four more resistors. Then there are six circular capacitors. Past these capacitors, the parts are no longer evenly placed. There are eight green components along with six more circular capacitors. In between all these components are six integrated circuits (microchips). There are also several other resistors and diodes around the remainder of the circuit board. At the very back of the circuit board is a small fin with twenty-three small copper colored tabs on it. This little fin slides into the drive and allows the drive to communicate with the circuit board and vice versa. The circuit board also uses a grid pattern on the surface to allow for proper and easy installation. This circuit board is rather long and is labeled from five to eighty on the top of the grid. The circuit board also uses holes in the front of the faceplate to be secured into place using screws.

AX Control is the leader in hard to find circuit boards and drives. We offer great prices and fast shipping.

","meta_title":"Pulse Driver PC Board","meta_description":"Pulse Driver PC Board","keywords":"Pulse Driver PC Board","series_page_description":"Pulse Driver PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 11:23:39","prod_pdf":[{"id":22,"product_id":8905,"pdf_id":15601,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15601,"pdf_type_id":1,"file_name":"0-51820-1.pdf","title_tag":"Pulse Driver PC Board","alt_tag":"Pulse Driver PC Board","created_at":null,"updated_at":null}}]},{"id":9112,"part_number":"0-51820-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Pulse Transmitter Board","short_desc":null,"content":"

The 0-51820-2 is a PC Pulse Transmitter Board produced by Reliance Electric. The 0-51820-2 board operates in a racking system. This card will slide into place and then be secured using the two anchoring screws on the faceplate. The face plate is barren with only the anchor screws, PLDC written at the top, the part number 0-51820-2 across the bottom and the Reliance Electric emblem to identify the card while it is in the rack. On the surface of the card is a series of fifteen integrated circuits ranging from a small size to medium size. The 0-51820-2 board has ten small circular and silver transistors (four across the top, four across the bottom and two in the center). The transmitter board has two large carbon composition style resistors in the center and sixty-nine smaller carbon composition style resistors around the remained of the board. The 0-51820-2 has two small diodes and twenty-five polyester style condensers. All of these individual pieces are nicely placed in linear clusters, in a similar if not matching fashion. The 0-51820-2 card uses a grid pattern to keep everything evenly placed. The X-axis of the grid is marked using letters of the alphabet and doubling them up to account for all the lines, the Y-axis of the grid uses numbers in intervals of five (going up to eighty) and tick marks to represent numbers that aren’t shown.

AX Control’s skilled staff is standing by to assist you with prices and shipping options.

","meta_title":"PC Pulse Transmitter Board","meta_description":"PC Pulse Transmitter Board","keywords":"PC Pulse Transmitter Board","series_page_description":"PC Pulse Transmitter Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 11:03:43","prod_pdf":[{"id":23,"product_id":9112,"pdf_id":15602,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15602,"pdf_type_id":1,"file_name":"0-51820-2.pdf","title_tag":"PC Pulse Transmitter Board","alt_tag":"PC Pulse Transmitter Board","created_at":null,"updated_at":null}}]},{"id":9114,"part_number":"0-51829","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LVTA PC Board","short_desc":null,"content":"

The 0-51829 is an LVTA PC Board manufactured by Reliance Electric. The circuit board section of the 0-51829 features a large transformer toward the back edge of the card. The transformer has a pale blue wire, a red wire, and a yellow wire attached to it and the other ends of the wires are attached to the circuit board. The 0-51829 has three small silver colored transistors. One of the three transistors has thin small black colored fins encircling it. The LVTA card uses five pale blue fusible resistors, two pink fusible resistors, and three red fusible resistors. There are also five carbon composite resistors (dark brown with strips) and a gray variable resistor. There is a bright yellow polypropylene capacitor, a PCB mount electrolytic capacitor, and a large silver polystyrene capacitor. The 0-51829 card also has a number of signal diodes. The circuit board is attached to a face plate so it can be installed into a power rack. The face plate is labeled with LVTA across the top and the part number 0-51829 and the Reliance Electric stamp to identify the card since the part number on the circuit board will not be visible once installed into the rack. There are two dials on the faceplate labeled Rate #1 and Rate #2. Around both dials are marked zero to ten. These dials are independent of each other. There is also a small black box at the bottom of the faceplate with three openings to attach wires to the 0-51829.

","meta_title":"LVTA PC Board","meta_description":"LVTA PC Board","keywords":"LVTA PC Board","series_page_description":"LVTA PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 11:50:23","prod_pdf":[{"id":19,"product_id":9114,"pdf_id":15603,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15603,"pdf_type_id":1,"file_name":"0-51829.pdf","title_tag":"LVTA PC Board","alt_tag":"LVTA PC Board","created_at":null,"updated_at":null}}]},{"id":9113,"part_number":"0-51829-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LVTB PC Circuit Board","short_desc":null,"content":"

The 0-51829-1 is a LVTB PC Circuit Board produced by Reliance Electric. The front of the panel has the letters LVTB written at the top. There is a small dial labeled RATE #1 and is used as the Acceleration knob. Around the dial, it is labeled zero through ten. There is a second dial on the front panel labeled RATE #2 and is used as the Deceleration knob. Around the dial, it is also labeled zero through ten. At the base of the front panel is the Reliance Electric emblem and the part number for the card (0-51829-1) to easily identify it when the card is installed. The circuit board section of this part is large but has minimal parts on it. The 0-51829-1 has a large polypropylene capacitor with two black wires securing it to the circuit board. There are also sixteen signal style diodes. These diodes are black and silver. There is a small gray rectangle near the lower edge which is a variable resistor and has a tiny knob to adjust it on the side facing the edge of the LVTB card. The 0-51829-1 also has four carbon composition resistors, two pink fusible resistors, nine light blue fusible resistors, and two varistor resistors. The 0-51829-1 card also has two silver transistors to amplify the energy the card produces. The 0-51829-1 is mapped out to add additional components should it be necessary.

AX Control is the leader in difficult to find automation pieces. Make AX Control your first stop.

","meta_title":"LVTB PC Circuit Board","meta_description":"LVTB PC Circuit Board","keywords":"LVTB PC Circuit Board","series_page_description":"LVTB PC Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 11:31:37","prod_pdf":[{"id":20,"product_id":9113,"pdf_id":15604,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15604,"pdf_type_id":1,"file_name":"0-51829-1.pdf","title_tag":"LVTB PC Circuit Board","alt_tag":"LVTB PC Circuit Board","created_at":null,"updated_at":null}}]},{"id":8906,"part_number":"0-51829-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":6,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Linear Voltage PC Board","short_desc":null,"content":"

The 0-51829-2 Linear Voltage PC Board made by Reliance Electric. The face of this circuit board is simple. There are two black knobbed variable resistors, with numbers on the dial ranging from zero to ten. The first variable resistor is labeled RATE 1 and the second variable resistor is labeled Rate 2. The inner workings on the circuit board are equally as simple. There is a large yellow polypropylene capacitor in the front towards the faceplate. There is a small suppressor capacitor above the polypropylene capacitor. There are four black wires. Two are coming from the variable resistor labeled RATE 1 and the other two are coming from the variable resistor labeled RATE 2. There are five brown colored resistors, four light blue colored resistors, five small circular capacitors (one is orange in color and the other four are yellowish brown in color). There are two small microchips in the center of the circuit board. There are nine tiny diodes and twelve medium sized light brown components with writing on the outside of them. All of these components are evenly placed and are in nice lines. The front of the circuit board by the faceplate uses multiple variations of the alphabet to label that side of the grid and numbers along the top half. The circuit board slides into place and is screwed down to secure it.

The professional staff at AX Control are experts in the hard to find automation products. Allow us to assist you in finding everything you need.

","meta_title":"Linear Voltage PC Board","meta_description":"Linear Voltage PC Board","keywords":"Linear Voltage PC Board","series_page_description":"Linear Voltage PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 11:38:59","prod_pdf":[{"id":16,"product_id":8906,"pdf_id":15605,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15605,"pdf_type_id":1,"file_name":"0-51829-2.pdf","title_tag":"Linear Voltage PC Board","alt_tag":"Linear Voltage PC Board","created_at":null,"updated_at":null}}]},{"id":8907,"part_number":"0-51831","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTD Circuit Board","short_desc":"","content":null,"meta_title":"CVTD Circuit Board","meta_description":"CVTD Circuit Board","keywords":"CVTD Circuit Board","series_page_description":"CVTD Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3175,"product_id":8907,"pdf_id":14231,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14231,"pdf_type_id":1,"file_name":"0-51831.pdf","title_tag":"CVTD Circuit Board | PDF","alt_tag":"CVTD Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":8908,"part_number":"0-51831-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit Board","short_desc":null,"content":"

Reliance Electric is the maker of the 0-51831-1 Industrial Control System. The front of the device has CVTB printed across the top. Along the front in a black section bolted on with twelve holes punched into it. There are the numbers two (2), three (3), nine (9) and ten (10) printed to the left of the black section and the part number 0-51831-1 printed below the black section. The black panel has screws underneath each of the punched holes. The 0-51831-1 is a double style circuit board or one circuit board on top of the other. With this being the case only the parts on the top circuit board will be listed. Starting towards the back there are two small transformers next to two large black circular components. Each of these large circular components has a red, a green, and a yellow wire coming out of the side. There are large orange capacitors in the shapes of circles, there are also five other light orange capacitors in the shape of smaller circles. There are two pale gray variable resistors with small screws on the right side to adjust them. The 0-51831-1 features six large black capacitors and four smaller silver capacitors. Each one has how much energy it can store inscribed on the outside of it. The top circuit board for this is slightly smaller the bottom circuit board. However, all that can be seen are the bottom circuit boards edges and how it is labeled.

Email or call AX Control to order the 0-51831-1 today.

","meta_title":"Circuit Board","meta_description":"Circuit Board","keywords":"Circuit Board","series_page_description":"Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 11:56:10","prod_pdf":[{"id":3174,"product_id":8908,"pdf_id":14232,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14232,"pdf_type_id":1,"file_name":"0-51831-1.pdf","title_tag":"Circuit Board | PDF","alt_tag":"Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":8909,"part_number":"0-51831-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTC Current Voltage Card","short_desc":null,"content":"

The 0-51831-2 is an CVTC printed circuit board by Reliance Electric. The front of the printed circuit board has ten metal screws. The first screw is labeled COM, the second screw is labeled COMV and collectively labeled ARM CURRENT FB., the third screw is labeled with a three (3), the fourth screw is labeled with a four (4), the fifth screw is labeled with a five (5), the sixth screw is labeled 500V, the seventh screw is labeled 240V, the eighth screw is labeled 180V, the ninth screw is labeled 100MV, and the tenth screw is labeled COM. Screws six through ten (6-10) are collectively labeled ARM VOLTS FB. The circuit board attached to the faceplate has a grid that all of the smaller pieces sit on. The grid is blocked out using numbers for the lines running the width of the circuit board and letters for the lines running the length of the circuit board. From the screw ports on the front there are seven wires coming from the faceplate and connecting to the circuit board at metal pins that say COM, 100V. 500V, 240V, 180 V, 100mv, and COM. There are various sized transistors throughout the circuit board, three small transformers in the center of the circuit board. There are various lengths of black wire toward the back end on the circuit board that just attaches to the circuit board in two places. There are also diodes to turn the traces into one-way streets.

Allow AX Control to provide you with everything you are looking for in one place.

","meta_title":"CVTC Current Voltage Card","meta_description":"CVTC Current Voltage Card","keywords":"CVTC Current Voltage Card","series_page_description":"CVTC Current Voltage Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 12:09:20","prod_pdf":[{"id":3173,"product_id":8909,"pdf_id":14233,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14233,"pdf_type_id":1,"file_name":"0-51831-2.pdf","title_tag":"CVTC Current Voltage Card | PDF","alt_tag":"CVTC Current Voltage Card | PDF","created_at":null,"updated_at":null}}]},{"id":8910,"part_number":"0-51831-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":15,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTD Current Voltage Circuit Board","short_desc":null,"content":"

The 0-51831-3 is a CVTD drive module by Reliance Electric. The front of the 0-51831-3 a ten-peg black section drilled onto the front. The first opening is labeled COM, the second opening is labeled 100MV, the third opening is labeled 150MV (these three openings are all under the label +4V MAX / PIN 2 and ARM CURRENT FB.), the fourth opening is just labeled four (4), the fifth opening is just labeled five (5), the sixth opening is labeled 500V, the seventh opening is labeled 240V, the eighth opening is labeled 180V, the ninth opening is labeled 100MV, the tenth opening is labeled COM. The openings number six through number ten fall under this universal label of -4V MAX / PIN 4 and ARM VOLTAGE FB. The opening can also have wires with diodes, capacitors, resistors, etc. connected to them. Toward the back of the circuit board is small sections of wire only attached to the circuit board. There are a large number of capacitors of different sizes and shapes to store energy. The circuit board also has two small blocks that are potentiometers. To adjust the potentiometers, use the small screws on the side. The 0-51831-3 also utilizes ten transformers and three large transformers, along with over a dozen diodes and resistors.

AX Control is the leader in finding you elusive parts from the automation industry. We ship each piece individually wrapped in an antistatic bag and proper padding, so the product arrives safely once it is shipped. Allow our expert staff to get you what you need to get back on track.

","meta_title":"CVTD Current Voltage Circuit Board","meta_description":"CVTD Current Voltage Circuit Board","keywords":"CVTD Current Voltage Circuit Board","series_page_description":"CVTD Current Voltage Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 12:26:58","prod_pdf":[{"id":3172,"product_id":8910,"pdf_id":14234,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14234,"pdf_type_id":1,"file_name":"0-51831-3.pdf","title_tag":"CVTD Current Voltage Circuit Board | PDF","alt_tag":"CVTD Current Voltage Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":9115,"part_number":"0-51831-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Voltage PC Board","short_desc":null,"content":"

The 0-51831-4 is a product of Reliance Electric. This CVTE printed circuit board uses twelve screws on the faceplate to connect various devices. Each screw is labeled. The first screw is labeled 319, the second screw is labeled 57, the third screw is labeled 194, the fourth screw is labeled 193, the fifth screw is labeled 192, These screws fall under a category with the label ARM CURRENT FB, the sixth screw is unlabeled, the seventh screw is unlabeled, starting at the eighth screw through the eleventh screw they are labeled under the category ARM VOLTS FB, the eighth screw is labeled COM, the ninth screw is labeled 240V, the tenth screw is labeled 500V, the eleventh screw is labeled 600V and the twelfth screw is unlabeled. There are nine black wires that extend from the faceplate to the circuit board at the tenth grid line. Starting at the fifteenth grid line and extending to the twenty-fifth grid line there are three large black resistors in the top left corner, each has its energy capacity written in white on the outside. Below the resistors are six small black diodes with silver lines at one end. Below the didoes are six mauve capacitors. From the thirtieth grid mark to the fortieth grid mark are two transformers, two mauve capacitors, two transistors, and six various diodes.

AX Control will ship the 0-51831 to you wrapped in an anti-static bag. AX Control prides ourselves on great customer service and offers a wide array of products at a great price.

","meta_title":"Current Voltage PC Board","meta_description":"Current Voltage PC Board","keywords":"Current Voltage PC Board","series_page_description":"Current Voltage PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 07:57:22","prod_pdf":[{"id":17,"product_id":9115,"pdf_id":15606,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15606,"pdf_type_id":1,"file_name":"0-51831-4.pdf","title_tag":"Current Voltage PC Board","alt_tag":"Current Voltage PC Board","created_at":null,"updated_at":null}}]},{"id":9116,"part_number":"0-51831-5","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTF PC Board","short_desc":null,"content":"

The 0-51831-5 is a printed circuit board by Reliance Electric. The circuit board has nine orange circular capacitors of varying sizes, five orange small rectangular capacitors, thirty-two light brown capacitors, and one light blue capacitor. The circuit board also has two small black transistors, four large silver circular transistors, eight small silver circular transistors. The circuit board has four large black diodes with a single silver band on one end, with there electrical capacity written around the outside, two tiny silver diodes with a thin black line on one end, and sixteen tiny orange glass diodes with a thin black line on one edge. The circuit board has five light brown resistors with multi-colored stripes (each resistors stripes are different), and two light blue resistors with multi-colored strips (each resistors stripes are different). The circuit board has two long variable resistors (potentiometers). The variable resistors are adjustable devices and have a small screw on the top short edge of the device (the face the top edge of the circuit board). The circuit board has twelve lengths of black wire in a range of lengths that are attached to the circuit board starting at the center and working their way towards the back end. There are also seven lengths of black wire at the front of the circuit board attached to metal pins and connect to the front panel. Each pin corresponds with a particular screw port on the front panel.

AX Control would like to assist you in getting the right part at the right price.

","meta_title":"CVTF PC Board","meta_description":"CVTF PC Board","keywords":"CVTF PC Board","series_page_description":"CVTF PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 08:16:41","prod_pdf":[{"id":3197,"product_id":9116,"pdf_id":15607,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15607,"pdf_type_id":1,"file_name":"0-51831-5.pdf","title_tag":"CVTF PC Board","alt_tag":"CVTF PC Board","created_at":null,"updated_at":null}}]},{"id":8911,"part_number":"0-51831-6","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":11,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTG Electric Drive Board","short_desc":null,"content":"

The 0-51831-6 is a voltage transducer circuit board made by Reliance Electric. The circuit board has a black block on the front panel that has six circular points on it. Each circular point is labeled. The first circular port is labeled 600V, the second circular port is labeled 500V, the third circular port is labeled 240V, the fourth circular port is not labeled, the fifth circular port is labeled 1V, and the sixth circular port is labeled COM. The front panel also has two anchor points (one on the top edge and the other on the bottom edge), along with CVTG at the top and the part number (0-51831-6) along the bottom edge with the Reliance Electric company logo. The circuit board is labeled alphabetically down the edge that connects to the front panel, and numerically in intervals of five, along the top long edge. The circuit board uses a large transformer, a large blue PCB Mount Electrolytic capacitor. The circuit board also has black and silver diodes, small bead shaped diodes, variously sized resistors with striped markings and other resistors without strips. The circuit board has rectangular red capacitors along with capacitors of various sizes. The circuit board also has five wires coming from the faceplate, along with a cluster of wires in the center of the circuit board on a harness. The circuit board also has a second step on top of everything else. This shelve has four wires connected to screws and a crystal oscillator.

AX Control is available by phone or email.

","meta_title":"CVTG Electric Drive Board","meta_description":"CVTG Electric Drive Board","keywords":"CVTG Electric Drive Board","series_page_description":"CVTG Electric Drive Board","quote_description":null,"inventory_notes":"HAS FACTORY PACKAGING","cross_reference":"","created_at":null,"updated_at":"2019-04-03 08:42:01","prod_pdf":[{"id":3171,"product_id":8911,"pdf_id":14235,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14235,"pdf_type_id":1,"file_name":"0-51831-6.pdf","title_tag":"CVTG Electric Drive Board | PDF","alt_tag":"CVTG Electric Drive Board | PDF","created_at":null,"updated_at":null}}]},{"id":8912,"part_number":"0-51831-7","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTH Printed Circuit Board","short_desc":"The 0-51831-7 is a Reliance Current Voltage Transductor Card CVTH","content":"

0-51831-7 CVTH Current Voltage Transductor

The 0-51831-7 is a printed circuit board fabricated by Reliance Electric. The same board may appear as manufactured by Asea Brown Boveri or Baldor Reliance; the part number is the same.

The 0-51831-7 functions as a Current-Voltage Transductor board. This product has been discontinued by the manufacturer. Transductors are used in power systems as magnetic amplifiers for reactive power compensation.

The 0-51831-7 is built with a front faceplate designed with four screw connections (+org 421, -blk 420, +org 37, -blk 137) that have a small removable clamping plate held on by two additional screws. The left side of the panel is labeled arm/current/shunt field/current/shunt. It also carries the board number and the Reliance logo along with a user caution: “If card is replaced, range tap(s) must be properly set. Refer to I/M or W/D.”

The circuit board attached to the front faceplate is also marked with the 0-51831-7 part number. The board has a large protective plate covering two-thirds of its surface, mounted to the PCB using standoffs and screws. A transistor is mounted to the top of this plate. Additionally, four wires thread through a drilled hole in the plate’s surface and terminate at screw mounts on the top surface.

The 0-51831-7 uses components like transformers, transistors, surface wiring, diodes, and metal film resistors. Capacitors tend to be made from aluminum electrolytic material. Not all components are marked with reference designators. Please refer to Reliance publications like manuals or user guides for more information.

","meta_title":"CVTH Printed Circuit Board","meta_description":"CVTH Printed Circuit Board","keywords":"CVTH Printed Circuit Board","series_page_description":"CVTH Printed Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-26 08:37:47","prod_pdf":[{"id":3170,"product_id":8912,"pdf_id":14236,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14236,"pdf_type_id":1,"file_name":"0-51831-7.pdf","title_tag":"CVTH Printed Circuit Board | PDF","alt_tag":"CVTH Printed Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":9117,"part_number":"0-51831-8","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CVTJ PC Board","short_desc":null,"content":"

The 0-51831-8 is a CVTH circuit board created by Reliance Electric. The front panel of the circuit board has a black attachment with four holes. The black attachment is broken up into two sections. The first section is labeled ARM CURRENT SHUNT and, in that section, has these smaller labels, +ORG 421, and -BLK 420. The second section is labeled FIELD CURRENT SHUNT and, in that section, has these smaller labels, +ORG 37, and -BLK 137. The circuit board has four wires coming through the faceplate from the black attachment. The circuit board has two levels. The top level is simple and has a crystal oscillator along with four black wires with red-eye hook attachments that come through a hole drilled in the board and are connected to four screws. The lower level (main) of the circuit board is mostly covered by this upper level. What can be seen along the outside is various style diodes (orange and black, white and black), resistors that range from small to large with a dark brown base color and stripes, two large black resistors with their energy limits written on them. There are also two small white capacitors with an orange cap on one end, a large white capacitor with an orange cap on one end and a huge capacitor that is secured with a plastic zip tie. A wiring harness/connector is visible under the edge of the upper level as well.

Allow AX Control to guide you to the perfect device for your needs.

","meta_title":"CVTJ PC Board","meta_description":"CVTJ PC Board","keywords":"CVTJ PC Board","series_page_description":"CVTJ PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 09:01:53","prod_pdf":[{"id":2303,"product_id":9117,"pdf_id":15608,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15608,"pdf_type_id":1,"file_name":"0-51831-8.pdf","title_tag":"CVTJ PC Board","alt_tag":"CVTJ PC Board","created_at":null,"updated_at":null}}]},{"id":9120,"part_number":"0-51839","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IRCA PC Relay Board","short_desc":"","content":null,"meta_title":"IRCA PC Relay Board","meta_description":"IRCA PC Relay Board","keywords":"IRCA PC Relay Board","series_page_description":"IRCA PC Relay Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3195,"product_id":9120,"pdf_id":15609,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15609,"pdf_type_id":1,"file_name":"0-51839.pdf","title_tag":"IRCA PC Relay Board","alt_tag":"IRCA PC Relay Board","created_at":null,"updated_at":null}}]},{"id":9119,"part_number":"0-51839-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IRCB Reversing Relay Card","short_desc":null,"content":"

The 0-51839-1 is an IRCB Reversing Relay Card produced by Reliance Electric. The front of this device is labeled with the part number (0-51839-1) and mentions that it is an IRCB card. There is a white circular light that is labeled Overload when the light is ON. Below this light is a red reset button. On the bottom right edge is a black rectangle that is labeled 145 and 147. The circuit board section of this device has a large transformer with a red, an orange, a green, and a black wire coming off it. There are three small polypropylene capacitors, a large yellow polypropylene capacitor, and a large light blue PCB mount electrolytic capacitor. The 0-51839-1 card has two small black transistors. The IRCB card uses a variety of resistors as well. There are two black thick film resistors, two orange varistor resistors, and fifteen fixed resistors. The 0-51839-1 card also has four blue boxes and a clear box. These boxes are called HONGFA power relays. On each of the power relays enclosures is a different circuit drawing, to represent the power relays purpose. The Reversing Relay card also uses a grid pattern across the surface of the circuit board. The grid pattern is labeled on two sides. The far left of the card is labeled with letters, while the upper edge of the card is labeled with numbers.

Are you struggling to find an automation part? Struggle no more! AX Control is the leader in automation parts and has what you’re looking for.

","meta_title":"IRCB Reversing Relay Card","meta_description":"IRCB Reversing Relay Card","keywords":"IRCB Reversing Relay Card","series_page_description":"IRCB Reversing Relay Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 13:18:16","prod_pdf":[{"id":3196,"product_id":9119,"pdf_id":15610,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15610,"pdf_type_id":1,"file_name":"0-51839-1.pdf","title_tag":"IRCB Reversing Relay Card","alt_tag":"IRCB Reversing Relay Card","created_at":null,"updated_at":null}}]},{"id":8913,"part_number":"0-51839-11","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Multiple Component Board","short_desc":"The 0-51839-11 is a IRCM Relay Coil Module Card","content":"

0-51839-11 IRCM Relay Coil Module Card

The 0-51839-11 is a printed circuit board manufactured by Reliance Electric. The part you are replacing may be marked as Baldor Reliance or Asea Brown Boveri; however, the part number should remain the same (0-51839-11 or 05183911.) This part is no longer produced by the manufacturer.

The 0-51839-11 is a Relay Coil Module Card. The board is designed with a front faceplate that will be visible when the card is inserted into a rack system. The faceplate has seven red LED indicators. These are placed to the left side of the faceplate. Each indicator is individually numbered. When any particular LED is lit, the corresponding relay is ‘on.’ To the right side of the faceplate, there is an eight-position terminal strip. This is labeled “Coil Inputs.” The first seven screw connections are numbered. The eighth is labeled “COM.” The faceplate also includes the board’s number and the Reliance logo.

The connected circuit board is also marked with 0-51839-11. The PCB is marked in a grid pattern. One edge is numbered by fives and the perpendicular edge is lettered. Components include seven relays, surface wiring, diodes, and resistors. The rear edge of the board has a short ‘tail’ extending from it with several conductive tabs. The board is drilled in the center of the rear edge. Refer to publications supplied by Reliance during the time of manufacture for more information. This includes data sheets, product manuals, and user guides. As the original equipment manufacturer, Reliance was responsible for technical support for this product.

","meta_title":"Multiple Component Board","meta_description":"Multiple Component Board","keywords":"Multiple Component Board","series_page_description":"Multiple Component Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-26 09:12:45","prod_pdf":[{"id":3193,"product_id":8913,"pdf_id":15611,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15611,"pdf_type_id":1,"file_name":"0-51839-11.pdf","title_tag":"Multiple Component Board","alt_tag":"Multiple Component Board","created_at":null,"updated_at":null}}]},{"id":9118,"part_number":"0-51839-13","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IRCP PC Relay Board","short_desc":null,"content":"

The 0-51839-13 is an IRCP PC Relay Board produced by Reliance Electric. This circuit board has a front face panel. On this front panel is marked IRCP across the top. Then there is an anchor screw. Below the screw, it reads RELAY ON. Below this label is seven white circles. The circles are labeled one, two, three, four, five, six, and seven. Each of these circles is an individual light. Below the lights is a teal green female connector with screw in anchor points. Below the female connector is the part number 0-51839-13 and another anchor screw. Where the faceplate connects to the actual circuit board are two wires coming from each of the lights on the front panel and attaching to the board. There is also about ten wires coming from the female connector on the front and attaching to the board. There are four rows of resistors totaling twenty-eight. Next, to the resistors are seven small integrated circuits, and three small PCB mount electrolytic condensers. In addition to the three next to the resistors, there are four more of the PCB mount electrolytic resistors towards the back of the circuit board. There are also seven large tallow boxes. These yellow boxes are the relays the lights refer to on the front panel. Each relay is labeled REL 1 through 7 and when the relay is operating it will illuminate its corresponding light on the front.

Allow AX Control to assist in finding the automation parts you need.

","meta_title":"IRCP PC Relay Board","meta_description":"IRCP PC Relay Board","keywords":"IRCP PC Relay Board","series_page_description":"IRCP PC Relay Board","quote_description":null,"inventory_notes":"NIB","cross_reference":"","created_at":null,"updated_at":"2019-04-10 12:08:06","prod_pdf":[{"id":3194,"product_id":9118,"pdf_id":15612,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15612,"pdf_type_id":1,"file_name":"0-51839-13.pdf","title_tag":"IRCP PC Relay Board","alt_tag":"IRCP PC Relay Board","created_at":null,"updated_at":null}}]},{"id":8914,"part_number":"0-51839-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IRCC Card Board","short_desc":"The 0-51839-2 is an IRCC Overload Circuit board from Reliance","content":"

0-51839-2 IRCC Card

The 0-51839-2 is a PCB (printed circuit board) fabricated as part of a line of replacement drive boards by Reliance Electric. This circuit board has been discontinued by the manufacturer and is not currently in production. Your part number may be written as 0518392 or O-51839-2 and may be marked as being produced by ABB (Asea Brown Boveri) or from Baldor Reliance.

The 0-51839-2 functions as an Overload circuit board. The PCB is attached to a front faceplate that will allow for easy handling and insertion or removal into a rack system. The faceplate is marked with the board number, the Reliance logo, and the board id. It has two set screws, one at the top and one at the bottom, a reset switch, and an indicator light with the notation that ‘Overload when light is on.’

The 0-51839-2 circuit board has very few components. The board is marked with a grid, with letters noted on one edge and numbers on a perpendicular edge. The board has a conductive backplane “tail” that plugs into the rack. There are four relays on the board surface, along with several transistors, thermistors, resistors, and capacitors. Capacitors can be polyester vinyl or made from other materials. There is a single integrated circuit. Surface wiring is used in several locations. Publications from Reliance, such as user guides, data sheets, or product manuals, will provide more in-depth information regarding the operation of this product, including information on installation procedures. Reliance Electric was responsible for providing technical support for this product.

","meta_title":"IRCC Card Board","meta_description":"IRCC Card Board","keywords":"IRCC Card Board","series_page_description":"IRCC Card Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-26 09:51:48","prod_pdf":[{"id":3169,"product_id":8914,"pdf_id":14238,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14238,"pdf_type_id":1,"file_name":"0-51839-2.pdf","title_tag":"IRCC Card Board | PDF","alt_tag":"IRCC Card Board | PDF","created_at":null,"updated_at":null}}]},{"id":8915,"part_number":"0-51839-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Relay Card Board by Reliance","short_desc":"The 0-51839-4 is a IRCE Relay Card from Reliance Electric","content":"

0-51839-4--Relay Board

The 0-51839-4 is a board component manufactured by Reliance Electric. This PCB is no longer being manufactured and has been discontinued by Reliance. Your board may have originally been manufactured by this company when it was working under a different name. It may be marked as manufactured by Baldor Reliance with a part number of 0518394 or from Asea Brown Bovari.

The 0-51839-4 is a Relay Card. The board is populated by seven relays that are placed in a V shape on the board. Each relay is paired with a disk capacitor that is placed next to it. Each of these components is a dull orange color. The board has metal film and carbon composite resistors. It also uses surface wiring to connect components located in the front faceplate to the PCB. There is a long surface wire along the back edge. The rear edge of the board has a conductive tail that connects the board into the rack system.

The front faceplate of the 0-51839-4 has seven light components. Each of these is numbered. The faceplate connects to the board via three screws connected through a flange. There is also a blue connector mounted into the front faceplate. More information regarding the installation and operation of the board can be accessed through manuals, user guides, and data sheets originally published by Reliance.

AX Control offers a number of different shipping options to your location, including expedited shipping. All static-sensitive boards are protected during transit by anti-static wrap. Our warehouse is located in central North Carolina.

","meta_title":"Relay Card Board by Reliance","meta_description":"Relay Card Board by Reliance","keywords":"Relay Card Board by Reliance","series_page_description":"Relay Card Board by Reliance","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-26 10:36:15","prod_pdf":[{"id":3112,"product_id":8915,"pdf_id":15613,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15613,"pdf_type_id":1,"file_name":"0-51839-4.pdf","title_tag":"Relay Card Board by Reliance","alt_tag":"Relay Card Board by Reliance","created_at":null,"updated_at":null}}]},{"id":8916,"part_number":"0-51839-6","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit IRCG Board","short_desc":"0-51839-6 is a Reliance Circuit board IRCG","content":"

0-51839-6 IRCG Relay Card

The 0-51839-6 is a board component manufactured by Reliance Electric to fit into various drive systems. The board you are currently replacing may be marked with the manufacturer name of Baldor-Reliance, with Reliance Electric, or with ABB/Asea Brown Boveri, depending on the time of its manufacture. The part number is static.

The 0-51839-6 functions as a Relay Circuit Board. The PCB is fronted by a silver-colored faceplate with an opening that allows a cable with a single male plug to extend from the board. It also has seven red LED indicators located under a notation of “Relay On.” These indicators are individually numbered from one to seven. These LED indicators wire to the board using black and white wires. The front faceplate connects to the circuit board using three screw connections.

The 0-51839-6 is printed with a grid pattern marked off with letters and numbers on the two axes. The board is populated with seven relays. These are individually labeled as Relay pos. 1 through Relay pos. 7. Additionally, the board has a number of diodes and carbon composite resistors. It also has multiple stab-on connectors covered by plastic wire connectors. These connectors are marked on the board’s surface with the color of wire that should attach to it (orn/wht/blk/blu/red/grn.) The wires that terminate to these points are connected to the plug component previously mentioned.

The 0-51839-6 is marked with the board number and with the Reliance logo. The rear edge of the board extends into a ‘tail’ that has been covered with conductive tabs; this tail acts as a sort of backplane connector for the board. Refer to manuals or data sheets for more information. Reliance Electric was responsible for all technical support for this product.

","meta_title":"Circuit IRCG Board","meta_description":"Circuit IRCG Board","keywords":"Circuit IRCG Board","series_page_description":"Circuit IRCG Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 10:32:30","prod_pdf":[{"id":3113,"product_id":8916,"pdf_id":15614,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15614,"pdf_type_id":1,"file_name":"0-51839-6.pdf","title_tag":"Circuit IRCG Board","alt_tag":"Circuit IRCG Board","created_at":null,"updated_at":null}}]},{"id":8917,"part_number":"0-51839-7","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Relay IRCH PC Board","short_desc":"The 0-51839-7 is a Reliance Overload Voltage Relay Card","content":"

0-51839-7 IRCH Overload Voltage Relay board

The 0-51839-7 is a PCB or printed circuit board manufactured by Reliance Electric. Now obsolete, 0-51839-7 boards were released over several years of manufacture and may be marked as Reliance boards, as Baldor-Reliance, or as coming from ABB (Asea Brown Boveri.) The part number remained the same.

The 0-51839-7 functions as an Overload Voltage Relay Card. The front faceplate attached to the circuit board is populated with a reset switch (red,) two red LED indicators marked VR Relay On and Overload, and a strip of contact screws numbered one through six. Screws three and four are also labeled OL and screws five and six are also labeled VR. The panel carries the board number and the Reliance logo.

The 0-51839-7 uses many instances of surface wiring. The reset switch mentioned above wires to the surface of the board using twisted red and black wires. Multiple wires extend from the back of the screw connections; many of these connect to the boards two relays, while others connect to points on the board. The board is populated with several integrated circuits, with disk capacitors and capacitors made from polyester vinyl, with transistors, and with diodes and resistors. The rear edge of the board extends in a “tail” that has three conductive tabs located on it. The board’s surface is printed with a grid pattern. The top of this pattern is numbered by fives and its left edge is lettered. More information regarding the board, its components, or operation or installation, can be found through Reliance publications like manuals or user guides.

AX Control is a global supplier of industrial automation parts. Our inventory is made up of new surplus products, liquidated stock, and reconditioned products that have been thoroughly inspected by our in-house specialists.

","meta_title":"Relay IRCH PC Board","meta_description":"Relay IRCH PC Board","keywords":"Relay IRCH PC Board","series_page_description":"Relay IRCH PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 13:41:38","prod_pdf":[{"id":3114,"product_id":8917,"pdf_id":15615,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15615,"pdf_type_id":1,"file_name":"0-51839-7.pdf","title_tag":"Relay IRCH PC Board","alt_tag":"Relay IRCH PC Board","created_at":null,"updated_at":null}}]},{"id":8918,"part_number":"0-51839-8","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Relay Board","short_desc":"The 0-51839-8 is a Reliance Relay Card","content":"

0-51839-8 Relay Card

The 0-51839-8 is a board component fabricated by Reliance Electric. Reliance was bought out by Baldor Electric Co in 2006, and this group was purchased by ABB Group in the later 2000s; your board may be marked as coming from any of these companies. The board number will remain constant.

The 0-51839-8 functions as a Relay Card. It is designed with a front faceplate and a conductive backplane. The faceplate is connected with three screws to the PCB and makes it easier for technicians to insert and remove the board from rack systems. The faceplate has seven light indicators located under a “Relay On” notation.

The 0-51839-8 circuit board is populated by seven relays. These are placed on the board in a V formation. Each relay is paired with a disk capacitor that is located close to one side of each relay. The board also has two lines of carbon composite resistors, fourteen in all. Surface wiring connects components located in the front panel to the surface of the board. The PCB has the board number and the Reliance logo. It also has a grid pattern on its surface that is marked off on one plane by numbers (5 through 80 by fives,) and on another plane by letters A through BD.) More information about the board and its operation can be accessed through Reliance publications like manuals, data sheets, or user guides.

AX Control has a variety of programs to help save you money. Click on any of the links located on this page to find out more about our warranty, exchange, or surplus purchase. Our team can also answer any questions you may have about these programs.

","meta_title":"PC Relay Board","meta_description":"PC Relay Board","keywords":"PC Relay Board","series_page_description":"PC Relay Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 10:02:24","prod_pdf":[{"id":3192,"product_id":8918,"pdf_id":15616,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15616,"pdf_type_id":1,"file_name":"0-51839-8.pdf","title_tag":"PC Relay Board","alt_tag":"PC Relay Board","created_at":null,"updated_at":null}}]},{"id":8919,"part_number":"0-51839-9","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Relay","short_desc":"The 0-51839-9 is a Reliance Relay Circuit Board IRCK","content":"

0-51839-9 IRCK Relay PCB

The 0-51839-9 is a PCB (printed circuit board) manufactured by Reliance Electric. Now obsolete, some of these boards are marked with names like “Baldor Reliance” or “ABB” (Asea Brown Boveri,) depending on the year of their production. The part number should remain the same across name changes.

The 0-51839-9 has a front faceplate that locks the product into place using two turn screws. These are located at the top and bottom of the faceplate. The front panel also has a reset button and a single light indicator that states below it “overload when light is on.” The front panel connects to the PCB via three screws threaded through from the bottom of the PCB.

The 0-51839-9 is populated by four relays, transistors, disk capacitors, capacitors of aluminum electrolytic and polyester vinyl, resistors, diodes, and integrated circuits. The board uses surface wiring at several points. Some surface wiring is point-to-point on the board, and some surface wiring connects components to the board or to the front panel.

The back edge of the board is designed with a conductive tail that functions as a backplane. The board itself is marked in a grid pattern. This is marked off by fives on one edge and lettered on another edge. More information about the board can be accessed through Reliance publications (manuals/user guides.) Reliance was originally responsible for all technical support for this board series.

AX Control is located in North Carolina, near the capital of Raleigh. We offer shipping services varying from economical ground service to Next Day Air.

","meta_title":"PC Board Relay","meta_description":"PC Board Relay","keywords":"PC Board Relay","series_page_description":"PC Board Relay","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 09:28:53","prod_pdf":[{"id":3095,"product_id":8919,"pdf_id":15617,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15617,"pdf_type_id":1,"file_name":"0-51839-9.pdf","title_tag":"PC Board Relay","alt_tag":"PC Board Relay","created_at":null,"updated_at":null}}]},{"id":8920,"part_number":"0-51845","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":4,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance PRSA Power Supply Board","short_desc":"The 0-51845 is a PRSA Power Supply","content":"

0-51845 PRSA Power supply board

The 0-51845 is a PRSA Power supply board manufactured by Reliance Electric. Drive boards like the PRSA were produced for several years and may be stamped with various manufacturer names depending on the year they were produced; this includes Baldor Reliance, Reliance, and ABB/Asea Brown Boveri. The part number for the PRSA should remain constant.

The 0-51845 fits into a rack system and is designed with an attached faceplate. The faceplate connects to the PCB using three screws threaded from the bottom of the board. The faceplate and board lock into the rack system via two lock screws that are located at the top and bottom of the front component. The faceplate includes these screws, the board number, and a single connection opening.

The 0-51845 is populated by a transformer (TR 8579 64977-26-A,) two transistors with heat sinks, two integrated circuits, six disk capacitors, diodes, aluminum electrolytic capacitors, and resistors that are usually made from metal film. The board uses surface wiring in several locations.

The surface of the 0-51845 is marked with a grid pattern. This is marked off by letters on one plane (A through BD,) and with numbers by fives on a second plane (5 through 80.) Components are not marked by reference designators. The rear edge of the board extends into a ‘tail’ with multiple conductive tabs. This functions as a backplane connector. More information regarding the operation, installation, and maintenance of this board may be found through Reliance publications like manuals and user guides.

","meta_title":"Reliance PRSA Power Supply Board","meta_description":"Reliance PRSA Power Supply Board","keywords":"Reliance PRSA Power Supply Board","series_page_description":"Reliance PRSA Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 08:53:30","prod_pdf":[{"id":3085,"product_id":8920,"pdf_id":16057,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":16057,"pdf_type_id":1,"file_name":"0-51845.pdf","title_tag":"Reliance PRSA Power Supply Board | PDF","alt_tag":"Reliance PRSA Power Supply Board | PDF","created_at":null,"updated_at":null}}]},{"id":8921,"part_number":"0-51845-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":14,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PRSB Power Supply Module","short_desc":"The 0-51845-1 is a Reliance Power Supply","content":"

0-51845-1 PRSB Power supply

The 0-51845-1 is a Reliance Electric printed circuit board. Now obsolete, this board was produced for several years, and due to changes in company structure, your board may be marked as an Asea Brown Boveri (ABB) board or as being manufactured by Baldor-Reliance. Your part number should be the same in all cases.

The 0-51845-1 is a Power Supply board. This board is designed to fit into a rack system and is connected to a front faceplate using three screws. The faceplate includes a set screw at its top and bottom to lock it into place. It has a single light indicator that is marked “Phase Sequence.” Below this, the faceplate is marked “Do Not Run Drive When Light is Out. Refer to Instructions.” More information regarding board operation can be accessed through Reliance publications like product manuals or series user guides.

The circuit board component on the 0-51845-1 is marked with a grid. The top edge of the board is numbered by fives, while a perpendicular side is lettered. The board is populated by various transistors, integrated circuits, resistors, and capacitors. Capacitors tend to be made of materials like aluminum electrolytic and polyester vinyl. The board also has several examples of surface wiring.

The 0-51845-1 has four standoffs connected to the board’s surface. These attach two metal plates to the board. Each of these plates has a Motorola 2N3055 transistor mounted to its center. Each plate also has a single wire screw connected to one corner. Technical support for this product was provided by Reliance.

","meta_title":"PRSB Power Supply Module","meta_description":"PRSB Power Supply Module","keywords":"PRSB Power Supply Module","series_page_description":"PRSB Power Supply Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 08:33:02","prod_pdf":[{"id":3086,"product_id":8921,"pdf_id":15619,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15619,"pdf_type_id":1,"file_name":"0-51845-1.pdf","title_tag":"PRSB Power Supply Module","alt_tag":"PRSB Power Supply Module","created_at":null,"updated_at":null}}]},{"id":9122,"part_number":"0-51845-2","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Precision Power Supply Board","short_desc":null,"content":"

The 0-51845-2 is a PRSC precision power supply card, created by Reliance Electric. The circuit board could also be labeled as an Asea Brown Boveri (ABB) board or as being manufactured by Baldor-Reliance. They are all still the same circuit board with the same part number. This circuit board is used in a power rack system. When in the rack the circuit board can’t be seen so there are identifying marks on the front panel including the part number (0-51845-2) along the bottom and PRSC along the top. The card secures into the rack using two screws. The front of the panel has a LED light titled Phase Sequence and has a warning below is stating: “DO NOT RUN DRIVE WHEN LIGHT IS OUT. REFER TO INSTRUCTIONS”. The details for this can be found in the publication by Reliance Electric such as data sheets and manuals. The 0-51845-2 has four pegs connected to the circuit board and the option to add four more near the back. These pegs allow for other devices or circuit boards to be attached to the main 0-51845-2 card. The four pegs that come attached have two metal plates attached to them with Motorola bipolar transistors in the center. The other pegs typically are used to hold a 0-51391 card by Reliance Electric (sold separately).

Each circuit board sold by AX Control comes wrapped in an anti-static bag in a box with secure padding to prevent the card from shifting and possibly being damaged while being shipped.

","meta_title":"Precision Power Supply Board","meta_description":"Precision Power Supply Board","keywords":"Precision Power Supply Board","series_page_description":"Precision Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 13:23:06","prod_pdf":[{"id":3087,"product_id":9122,"pdf_id":15620,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15620,"pdf_type_id":1,"file_name":"0-51845-2.pdf","title_tag":"Precision Power Supply Board","alt_tag":"Precision Power Supply Board","created_at":null,"updated_at":null}}]},{"id":9121,"part_number":"0-51845-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PSRB Power Supply Board","short_desc":null,"content":"

The 0-51845-3 is a PSRB power supply card manufactured by Reliance Electric. The 0-51845-3 has a simple front panel that includes anchoring screws and a small domed LED indicator. The LED indicator is labeled Phase Sequence. Under the LED indicator there is a warning which reads: DO NOT RUN DRIVE WHEN LIGHT IS OUT. REFER TO INSTRUCTIONS. The PSRB card has two levels, the actual circuit board and then two small metal plates that sit on pegs just above the surface of the circuit board. The circuit board has many pieces, however with the two metal plates it does cover some components, so what is described is what can be seen without removing those two panels. The 0-51845-3 has seven black transistors, four small metal transistors. There is a small gray variable resistor on the upper edge at the number thirty grid line. On the back edge of the card, there are two medium sized blue capacitors and two large blue capacitors. The is also a small yellow capacitor next to two black thick film resistors. The 0-51845-3 is also littered with pale blue and light brown fusible resistors. The second level is two separate metal sheets next to each other. Each panel is held up by two pegs one on either short edge. In the center of each of these metal plates is a Bipolar Transistor. Each card also has a serial number stamped into the edge.

The friendly staff at AX Control looks forward to assisting you.

","meta_title":"PSRB Power Supply Board","meta_description":"PSRB Power Supply Board","keywords":"PSRB Power Supply Board","series_page_description":"PSRB Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 08:34:51","prod_pdf":[{"id":3088,"product_id":9121,"pdf_id":15621,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15621,"pdf_type_id":1,"file_name":"0-51845-3.pdf","title_tag":"PSRB Power Supply Board","alt_tag":"PSRB Power Supply Board","created_at":null,"updated_at":null}}]},{"id":8922,"part_number":"0-51847-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VLDB Voltage Detector","short_desc":"The 0-51847-1 is a Reliance Voltage Detector Board VLDB","content":"

0-51847-1 Voltage Detector Board

The 0-51847-1 is a board component originally fabricated by Reliance Electric. This circuit board is now obsolete and is no longer actively manufactured by Reliance. Due to various name changes over the history of the company, your board may be marked Baldor-Reliance or ABB (Asea Brown Boveri.) The board number should be the same.

The 0-51847-1 functions as a Voltage Detector board. It has a front faceplate attached to the circuit board via three screws threaded through from the bottom of the board. This faceplate includes reference to the board number and name (VLDB.) It also has the Reliance logo and a notation that “1 S Relay is energized when light is on.” This is notated under a single red LED indicator. The faceplate has one rotary dial that is labeled “Bias,” and six screw connections, five of which are labeled 1, 2, 3, 81, and 82.

The 0-51847-1 board is marked with a grid pattern. The grid is notated on one side of the board with numbers by fives and on another side of the board by letters. The edge of the board opposite the faceplate is populated by a ‘tail’ with conductive tabs. These act as a backplane connector. The board is populated by a single transformer, one relay mounted into a frame that has been screwed to the circuit board, integrated circuits, disc capacitors, transistors, and resistors typically made of metal film. Other capacitors are also used on the board; these are made from materials like polyester vinyl and aluminum electrolytic. The board has many instances of surface wiring, either from component to component or from board point to board point. More detailed information can be found through Reliance publications like user guides and manuals.

","meta_title":"VLDB Voltage Detector","meta_description":"VLDB Voltage Detector","keywords":"VLDB Voltage Detector","series_page_description":"VLDB Voltage Detector","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 08:03:56","prod_pdf":[{"id":3162,"product_id":8922,"pdf_id":14246,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14246,"pdf_type_id":1,"file_name":"0-51847-1.pdf","title_tag":"VLDB Voltage Detector | PDF","alt_tag":"VLDB Voltage Detector | PDF","created_at":null,"updated_at":null}}]},{"id":9123,"part_number":"0-51847-2","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VLDC PC Board","short_desc":null,"content":"

The 0-51847-2 is VLDC card that was produced by Reliance Electric. The front panel of the 0-51847-2 has three red LED indicator lights. The top LED light is marked Feed Permissive, the second LED light is marked Gear Tool Change Permissive, and the third LED light is marked Tapping. There are also two black dials on the front panel. Each dial has numbers inscribed on them going from zero to ten. The top dial is marked Gear Tool Change Speed Calibrate, and the bottom dial is marked Overspeed Rate Slowdown. The VLDC card gets its power from being used in a power rack system. The circuit board itself has a small metal rack at the back that can hold two smaller circuit boards (that are not included and sold separately). To install the two small circuit boards all one must do is unscrew the upper support, slide the smaller cards into the slots and re-secure the upper support. The 0-51847-2 uses six silver transistors, eight small black transistors, five varistor resistors, forty-six light blue fusible resistors, six red fusible resistors, two light pink fusible resistors, ten signal diodes, two Zenner diodes, and a polypropylene capacitor. The VLDC card does have a grid pattern on the surface, however, the electrical traces are larger squares or blocks then thin lines on a standard circuit board. This blocks out much of the grid pattern. The 0-51847-2 also features surface wiring as well.

If you would like to order the 0-51847-2 please email or call AX Control.

","meta_title":"VLDC PC Board","meta_description":"VLDC PC Board","keywords":"VLDC PC Board","series_page_description":"VLDC PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 09:14:23","prod_pdf":[{"id":3089,"product_id":9123,"pdf_id":15622,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15622,"pdf_type_id":1,"file_name":"0-51847-2.pdf","title_tag":"VLDC PC Board","alt_tag":"VLDC PC Board","created_at":null,"updated_at":null}}]},{"id":8923,"part_number":"0-51847-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Voltage Detect PC Board","short_desc":"The 0-51847-3 is a Reliance Voltage Level Detector board VLDD","content":"

0-51847-3 VLDD Voltage Level Detector

The 0-51847-3 is a Reliance circuit board. This board was produced by Reliance for multiple years; because of changes in company structure some boards may be marked as Baldor-Reliance or will be marked with the ABB logo (Asea Brown Boveri.) Reliance Electric is a precursor or subsidiary of these other manufacturers.

The 0-51847-3 functions as a Voltage Level Detector PCB. The board has a front faceplate connected to the circuit board using three screws. The faceplate is populated by two rotary dials, two mounting screws, and three red LED indicators. The LED indicators are labeled (from top of the faceplate to the bottom) as “Feed Permissive,” “Gear-Tool Change Permissive,” and “Tapping.” The first rotary dial is marked as Gear-Tool Change Speed Calibrate. The second rotary dial is marked as Overspeed Rate Slowdown.

The 0-51847-3 has a five-piece metal house mounted to the board. This housing supports and protects a right-angled auxiliary board mounted to the rear portion of the board. The auxiliary board is populated with transistors, capacitors, carbon composite resistors, and disk capacitors.

The 0-51847-3 has a grid printed on its surface. It has multiple examples of surface wiring. The board has several terminal pins located on its surface. It also has disk capacitors, polyester vinyl capacitors, transistors, resistors, and diodes. More information regarding the operation or installation of the board can be found through publications originally provided by Reliance, such as product manuals or user guides. Reliance Electric was responsible for providing all technical support for this product.

","meta_title":"Voltage Detect PC Board","meta_description":"Voltage Detect PC Board","keywords":"Voltage Detect PC Board","series_page_description":"Voltage Detect PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 11:54:14","prod_pdf":[{"id":3090,"product_id":8923,"pdf_id":15623,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15623,"pdf_type_id":1,"file_name":"0-51847-3.pdf","title_tag":"Voltage Detect PC Board","alt_tag":"Voltage Detect PC Board","created_at":null,"updated_at":null}}]},{"id":8924,"part_number":"0-51847-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VLDE Card","short_desc":"The 0-51847-4 is a Voltage Detect Board from Reliance","content":"

0-51847-4 Voltage Detect PC Board

The 0-51847-4 is a printed circuit board (PCB) fabricated by Reliance. Drive boards like the 0-51847-4 may be marked with the Reliance logo or may be marked as coming from Baldor-Reliance or ABB (Asea Brown Boveri.)

The 0-51847-4 has a front faceplate with a rotary dial marked “Bias.” This rotary dial is connected to a potentiometer mounted to the back side of the faceplate. The front faceplate also has six screws covered by a cover. The first three of these screws are labeled 1, 2, and 3. The fourth screw is not labeled. The last two screws are labeled 81 and 82. The front faceplate also has a single red LED indicator that has a notation that “1 S is energized when light is on.” The faceplate has two set screws to connect the board component into the rack system.

The 0-51847-4 is populated by a transformer, a relay, several transistors, integrated circuits, and resistors, disk capacitors, diodes, and capacitors made of polyester vinyl, aluminum electrolytic, and other materials. The board uses surface wiring in several locations. The board has a conductive tail stub that is used as a backplane connector. Publications originally provided by Reliance (manuals, datasheets, user guides) for technical support will still provide more in-depth information about the operation and installation of this board.

AX Control maintains a large inventory of Reliance Electric Drive Boards. Many of these boards are new products housed in the original manufacturer’s box. Other products have been through our extensive refurbishment and reconditioning process completed by our in-house experts.

","meta_title":"VLDE Card","meta_description":"VLDE Card","keywords":"VLDE Card","series_page_description":"VLDE Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 11:18:40","prod_pdf":[{"id":3161,"product_id":8924,"pdf_id":14248,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14248,"pdf_type_id":1,"file_name":"0-51847-4.pdf","title_tag":"VLDE Card | PDF","alt_tag":"VLDE Card | PDF","created_at":null,"updated_at":null}}]},{"id":8925,"part_number":"0-51848-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit PC Board","short_desc":"The 0-51848-1 is a Reliance RPCB circuit board","content":"

0-51848-1 RPCB Circuit board

The 0-51848-1 is a circuit board manufactured by Reliance Electric to be part of Reliance Electric drive systems. Due to mergers and changes in corporate structure, these boards may be marked with manufacturer logos from Reliance Electric, from Baldor-Electric, or from Asea Brown Boveri (ABB.)

The 0-51848-1 has a silver-colored front faceplate attached to the board component. The front faceplate has four rotary dials that are marked from zero to ten. The dials are labeled stability, limit, calib, and taper. Each one of these rotary dials connects to a potentiometer that is located on the opposite side of the faceplate. There are several wires that connect from the faceplate above each potentiometer to the surface of the circuit board.

The 0-51848-1 is populated by a single relay. Multiple surface wires extend from this component and connect to the surface of the board. There are also eight integrated circuits, ceramic disk capacitors, capacitors made from polyester vinyl and other materials, resistors, diodes, and surface wiring on the board.

The surface of the 0-51848-1 is printed in a grid pattern that is marked on one axis with letters and on another with numbers. The rear edge extends into a tail. This tail has a single drill hole. Information regarding the operation or installation of this board may be accessed via technical support publications originally provided by Reliance Electric. This includes manuals, data sheets, and user guides.

AX Control is located in central North Carolina near the capital of Raleigh. A shipping quote will be provided to you upon request. We offer shipping through several carriers, including Next Day Air and economical ground options.

","meta_title":"Circuit PC Board","meta_description":"Circuit PC Board","keywords":"Circuit PC Board","series_page_description":"Circuit PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 10:08:13","prod_pdf":[{"id":3083,"product_id":8925,"pdf_id":15624,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15624,"pdf_type_id":1,"file_name":"0-51848-1.pdf","title_tag":"Circuit PC Board","alt_tag":"Circuit PC Board","created_at":null,"updated_at":null}}]},{"id":18550,"part_number":"0-51849-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD GATE DRIVER","short_desc":null,"content":"

The 0-51849-1 was a GDCB Gate Driver Control Board created by Reliance Electric for the HR2000 series. This driver may have also been produced by Asea Brown Boveri and Baldor Reliance depending on what year it was being put into production. This board is retired and no longer being produced by the manufacturers, but AX Control does attempt to keep this item in stock. Please call us to find out the availability and the condition of this item.

The 0-51849-1 was a replacement part for a MaxPak. The 0-51849-1 is a longboard with a handful of parts but can hold up to six smaller circuit boards secured using a metal bracket at the back of the circuit board. These six circuit boards do come with the 0-51849-1 when it is sold. The six cards are identical and feature a series of capacitors, resistors, and diodes that are laid out on a grid-patterned card. At the front of the 0-51849-1, there are two large capacitors and a tiny capacitor. There is a light pink fusible resistor and a small orange carbon composition resistor. The 0-51849-1 also has a larger power relay in the center and a transistor right next to it. This entire setup is already mounted onto a steel front faceplate using a bracket and three screws. This entire setup can then be slid into another enclosure.

If you have any questions about the 0-51849-1, please don’t hesitate to contact AX Control via email or phone call. We are here to help you through your system repair process.

","meta_title":"RELIANCE ELECTRIC PC BOARD GATE DRIVER","meta_description":"RELIANCE ELECTRIC PC BOARD GATE DRIVER","keywords":"RELIANCE ELECTRIC PC BOARD GATE DRIVER","series_page_description":"RELIANCE ELECTRIC PC BOARD GATE DRIVER","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-25 12:15:39","prod_pdf":[]},{"id":13148,"part_number":"0-51849-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC BOARD GATE DRIVER","short_desc":null,"content":"

0-51849-3 GDCD Gate Driver Control Module

The 0-51849-3 is a board component originally manufactured and released by Reliance Electric. It functions as a Gate Driver Control Module (GDCD.) This board component includes a front faceplate that attaches to the circuit board via three screw connections. The faceplate does not have any components mounted into its surface. Rather, it serves as a space filler within the rack front. The panel is marked with the board id and number and includes two set screws to lock the module in place once it is installed.

The board component portion of the 0-51849-3 is printed over its surface with a grid pattern. It is factory drilled to allow for the addition of mounting hardware. The back half of this board is taken up by a metal framework that holds six auxiliary cards mounted to the primary board at a ninety-degree angle. These cards are identical to each other and are populated by resistors, capacitors, diodes, integrated circuits, and transistors. Surface wiring runs underneath at least one of these boards on the main board surface. Other components on the board, located toward the front of the PCB, include two large electrolytic capacitors, diodes, resistors, a relay with a relay diagram printed on its top surface, and several smaller capacitors. Components are not marked by reference designators but may have their original manufacturer codes.

For more detailed information on the 0-51849-3, please consult data sheets or user guides from Reliance. Your original board component may have shipped from Baldor-Reliance or Asea Brown Boveri. If you have any questions regarding compatibility with our replacement part, please don’t hesitate to reach out to our team.

","meta_title":"PC BOARD GATE DRIVER","meta_description":"PC BOARD GATE DRIVER","keywords":"PC BOARD GATE DRIVER","series_page_description":"PC BOARD GATE DRIVER","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-25 15:41:50","prod_pdf":[]},{"id":8926,"part_number":"0-51851","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Control Board Regulator","short_desc":"The 0-51851 is a PC Control Regulator Board CRCA","content":"

0-51851-- PC Control Regulator Board CRCA

The 0-51851 is a circuit board made by Reliance Electric for use within its drive systems. Due to changes within the Reliance corporate structure, boards may be marked as manufactured by Asea Brown Boveri (ABB,) Baldor-Reliance, or from Reliance Electric. The part number is the same. It is currently discontinued by the manufacturer.

The 0-51851 functions as a PC Control Regulator Card. The PCB connects via three screws to a front faceplate that is populated by four rotary dials. Each of these dials is numbered from zero to ten and can be individually set. They are labeled (from top to bottom,) as min speed, max speed, cur limit, and accel rate. A potentiometer matches up to each of these rotary dials on the rear side of the faceplate.

The 0-51851 board is printed with a grid pattern. It also carries the board number in the bottom front corner. The rear edge of the board extends in a ‘tail’ that is covered with conductive tabs; this acts as a sort of backplane connector. Near this connector, the board has two vertical metal pieces connected by three crossbars; this component is typically used to steady a right-angled auxiliary board; however, no such board is installed on this PCB.

Other components on the 0-51851 include three toroidal transformers, eleven ceramic disk capacitors, transistors, integrated circuits, surface wiring, resistors, diodes, and capacitors. More information regarding board operation or installation procedures may be accessed through Reliance publications like data sheets, product user guides, or series manuals. These publications were originally provided as part of Reliance’s technical support.

","meta_title":"Reliance Control Board Regulator","meta_description":"Reliance Control Board Regulator","keywords":"Reliance Control Board Regulator","series_page_description":"Reliance Control Board Regulator","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 09:17:16","prod_pdf":[{"id":3160,"product_id":8926,"pdf_id":14250,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14250,"pdf_type_id":1,"file_name":"0-51851.pdf","title_tag":"Reliance Control Board Regulator | PDF","alt_tag":"Reliance Control Board Regulator | PDF","created_at":null,"updated_at":null}}]},{"id":9125,"part_number":"0-51851-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Regulator Control Circuit Board","short_desc":null,"content":"

The 0-51851-3 is Reliance Electric control card. This control card can support up to two daughter boards using a metal rack system at the back edge of the card. The surface of the 0-51851-3 has a large number of small components. The 0-51851-3 uses a wide range of capacitors, different style diodes, different kinds of resistors, integrated circuits, three large induction coils, and a variety of surface wiring styles. Every piece is laid out on a grid pattern. The upper edge labeled using numbers and the left edge (connected to the front panel) is marked using a series of letters. The 0-51851-3 slides into a power rack to function. The back of the card has a small fin with long and short gold lines. These gold lines are called traces and they allow for electricity to flow from the power rack into the circuit board. Ensure that this fin is in the proper place when installing it into the rack of the card will not function. Also, ensure that the circuit board is anchored properly using the two screws on the front panel. To control the 0-51851-3 card, there are four dials with the option for a fifth. The optional dial is marked as IR COMP. The installed dials are marked as CURR. LIMIT, ACCEL. RATE, MAX SPD, and MIN SPD. Each of these dials can go from zero to ten or anywhere in between. Also adjusting one will NOT affect the others.

Reach out to AX Control’s skilled staff for more information.

","meta_title":"Regulator Control Circuit Board","meta_description":"Regulator Control Circuit Board","keywords":"Regulator Control Circuit Board","series_page_description":"Regulator Control Circuit Board","quote_description":null,"inventory_notes":"NO BOX NEW SURPLUS","cross_reference":"","created_at":null,"updated_at":"2019-04-11 13:25:58","prod_pdf":[{"id":3084,"product_id":9125,"pdf_id":15625,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15625,"pdf_type_id":1,"file_name":"0-51851-3.pdf","title_tag":"Regulator Control Circuit Board","alt_tag":"Regulator Control Circuit Board","created_at":null,"updated_at":null}}]},{"id":9124,"part_number":"0-51851-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Regulator Control PC Board","short_desc":null,"content":"

The 0-51851-4 CRCE regulator circuit board that was produced by Reliance Electric. This circuit board is no longer in production and is considered obsolete. The front of the 0-51851-4 has six small black dials placed side by side. Each dial has a range of zero to ten and can be adjusted independently of each other. The dial on the top left is labeled Min. Spd. The dial on the top right is labeled Max. Spd. The dial in the middle on the left is Decel. Rate. The dial in the middle on the right is labeled Accel. Rate. The bottom dial on the left is labeled IR Comp. The dial on the bottom right is labeled Curr. Limit.

The 0-51851-4 circuit board has three large wire induction cables. There are two small integrated circuits below the induction coils. The 0-51851-4 features six circular varistor resistors, four large thick film resistors, seventeen light blue, and six red fusible resistors, along with twenty carbon composition resistors. The card also features a series of silver and black transistors, a variety of capacitors, and diodes. The 0-51851-4 features a grid pattern across the surface to keep everything organized and simple to find. At the rear of the circuit board starting at the sixty-five-grid line to the eighty-grid line is a metal support system. This metal support system is an area to place smaller daughter boards (that are sold separately). This support system can house two small daughter boards.

Contact AX Control to order your parts today.

","meta_title":"Regulator Control PC Board","meta_description":"Regulator Control PC Board","keywords":"Regulator Control PC Board","series_page_description":"Regulator Control PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 09:40:01","prod_pdf":[{"id":3080,"product_id":9124,"pdf_id":15626,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15626,"pdf_type_id":1,"file_name":"0-51851-4.pdf","title_tag":"Regulator Control PC Board","alt_tag":"Regulator Control PC Board","created_at":null,"updated_at":null}}]},{"id":8927,"part_number":"0-51851-5","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Regulator Module PCB Circuit Board","short_desc":"The 0-51851-5 is a Reliance Regulator Control Module CRCF","content":"

0-51851-5 CRCF Regulator Control Module

The 0-51851-5 is a PCB (printed circuit board) made by Reliance Electric for use within various Reliance drives. Drive boards like this one can carry a number of different manufacturer marks due to changes in Reliance’s corporate structure. This includes Reliance Electric, ABB (Asea Brown Boveri,) and Baldor-Reliance. The part number will be the same in all cases.

The 0-51851-5 functions as a Regulator Control Module. The component is designed with a front faceplate attached to the circuit board. The faceplate is populated with eight rotary dials. These are labeled (top to bottom) max spd, min spd, accl, decl, jog spd, cur lim, ir comp, and stab. Each dial can be set from zero to ten. Each of these rotary dials matches up with a potentiometer located on the rear side of the faceplate. The faceplate attaches to the board surface via three screws.

The 0-51851-5 is populated by six integrated circuits and several transistors. The board has resistors made from both metal film and carbon composite material. Capacitors include ceramic disk capacitors, polyester vinyl axial capacitors, and capacitors of other material. Surface wiring is used at several points on the board’s surface. The rear edge of the board extends in a tail covered in conductive tabs; this functions as a sort of backplane.

More information regarding the board and its operation may be found through publications originally provided by Reliance. These include data sheets, user guides, and manuals. These publications will also provide more detailed information regarding handling procedures and installation instructions.

","meta_title":"Reliance Regulator Module PCB Circuit Board","meta_description":"Reliance Regulator Module PCB Circuit Board","keywords":"Reliance Regulator Module PCB Circuit Board","series_page_description":"Reliance Regulator Module PCB Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 08:52:16","prod_pdf":[{"id":3158,"product_id":8927,"pdf_id":14251,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14251,"pdf_type_id":1,"file_name":"0-51851-5.pdf","title_tag":"Reliance Regulator Module PCB Circuit Board | PDF","alt_tag":"Reliance Regulator Module PCB Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":8928,"part_number":"0-51851-6","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":14,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CRCG Regulator Module","short_desc":"The 0-51851-6 is a Reliance Regulator Control Module CRCG","content":"

0-51851-6 Regulator Control Module CRCG

The 0-51851-6 is a board component manufactured by Reliance Electric to be used within various Reliance drive systems. This component uses a standard front faceplate connected to a circuit board component. It may be marked with a Reliance logo, or could possibly be marked as coming from Baldor-Reliance or ABB. The part number will always reflect the 51851-6 number, regardless of manufacturer.

The 0-51851-6 functions as a Regulator Control Module. The attached faceplate is populated with two set screws to hold the board in place within the rack system. It also has eight rotary dials located on its surface. These can be set anywhere between zero to ten. The dials are labeled max spd, min spd, rate 1, rate 2, jog spd, lim 1, lim 2, and stab.

The circuit board portion of the 0-51851-6 is populated along its front edge by eight potentiometers. These connect to the rotary dials within the faceplate. The board has three large polyester vinyl capacitors that are each secondarily supported by zip ties. The board has additional capacitors, including other polyester vinyl capacitors, ceramic capacitors, and disk capacitors. The board has metal film resistors and diodes, along with multiple transistors. There are twelve integrated circuits on the board surface. The board is drilled in several places, and also has vertical pins for the addition of non-axial components. These pin connections are labeled IC, J2, 1R, 4R, 2R, 3R, 3Z, J1, 2Z and 1Z.

Please refer to Reliance publications like user guides or data sheets for more in-depth information, including information regarding installation and maintenance of the board.

","meta_title":"CRCG Regulator Module","meta_description":"CRCG Regulator Module","keywords":"CRCG Regulator Module","series_page_description":"CRCG Regulator Module","quote_description":null,"inventory_notes":"2 W/O BOX","cross_reference":"","created_at":null,"updated_at":"2019-04-01 12:01:40","prod_pdf":[{"id":3159,"product_id":8928,"pdf_id":14252,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14252,"pdf_type_id":1,"file_name":"0-51851-6.pdf","title_tag":"CRCG Regulator Module | PDF","alt_tag":"CRCG Regulator Module | PDF","created_at":null,"updated_at":null}}]},{"id":16800,"part_number":"0-51862","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD UNIVERSAL","short_desc":null,"content":"

Reliance Electric is the maker of the 0-51862 circuit board. The front panel of the 0-51862 has two anchor points. One anchor at the top and the other anchor at the bottom. Above the lower anchor is a blueish green colored female connection terminal with small anchor points of its own. The front panel also has three black dials. Each dial is labeled zero through ten with four small hash marks in between each whole number. The dials have their own label for what purpose they hold. The top dial is labeled LIMIT 1. The middle dial is labeled LIMIT 2. The bottom dial is labeled STAB. The dials and the female connection terminal all have wires that connect to the circuit board behind the front panel. The dials wires are black and the wires from the female terminal are braided together and are black and orange in color. The circuit board section of the 0-51862 has seven large yellow polypropylene condensers and two red polyester style condensers. The card also has a large gold relay box with a circuit drawing on the lid of the box. The 0-51862 uses two small black transistors, five signal diodes, three orange circular varistor resistors, twenty-eight light blue fusible resistors, one large black thick film resistor, and three small integrated circuits to control it all. For more details see the instruction manuals from Reliance Electric.

If you would like to order the 0-51862 please reach out to the knowledgeable staff of AX Control.

","meta_title":"RELIANCE ELECTRIC PC BOARD UNIVERSAL","meta_description":"RELIANCE ELECTRIC PC BOARD UNIVERSAL","keywords":"RELIANCE ELECTRIC PC BOARD UNIVERSAL","series_page_description":"RELIANCE ELECTRIC PC BOARD UNIVERSAL","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-15 08:54:05","prod_pdf":[]},{"id":8929,"part_number":"0-51862-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":17,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit Board Module","short_desc":"The 0-51862-1 is a Reliance Universal Summing Amplifier Module","content":"

0-51862-1--Universal Summing Amplifier Module USAB

The 0-51862-1 is a PCB board/faceplate component manufactured by Reliance Electric. This component is designed for various Reliance drive systems. As Reliance Electric has experienced name changes over its history, it is possibly your board is marked as manufactured by Baldor-Reliance, Reliance Electric, or ABB (Asea Brown Boveri.) The part number is static.

The 0-51862-1 functions as a Universal Summing Amplifier Module. The board is fronted by a silver-colored faceplate that is populated by a single female plug connector and three rotary dials. The rotary dials are each backed by potentiometers. Each dial is marked with hashtags and numbers from zero to ten. The dials are labeled Limit 1, Limit 2, and Stab. The faceplate attaches to the circuit board using three screw connections.

The circuit board portion of the 0-51862-1 is marked on its surface with a grid pattern. One axis of this grid is marked by numbers, while the other is labeled with letters. Components typically do not carry reference designators. The board is populated with several polyester vinyl capacitors. It also has metal film and carbon composite resistors, disk capacitors, diodes, and transistors. Surface wiring is used in several locations on the board surface. The rear edge of the board extends into a ‘tail’ that is populated with several conductive tabs.

If more information is needed regarding board components, please refer to publications from Reliance such as data sheets, product manuals, or user guides. These publications were originally provided by Reliance for customer support. Such publications will provide more information regarding the maintenance and installation of this product.

","meta_title":"Circuit Board Module","meta_description":"Circuit Board Module","keywords":"Circuit Board Module","series_page_description":"Circuit Board Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 08:29:22","prod_pdf":[{"id":3157,"product_id":8929,"pdf_id":14253,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14253,"pdf_type_id":1,"file_name":"0-51862-1.pdf","title_tag":"Circuit Board Module | PDF","alt_tag":"Circuit Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":9126,"part_number":"0-51862-2","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"USAB PC Board","short_desc":null,"content":"

The 0-51862-2 is a USAB PC board made by Reliance Electric. The USAB card is used in a power rack and is controlled by a front panel that is exposed when the card is installed into the power rack. The controls for this card are three black dials that run down the faceplate. The first dial is titled Limit 1, the second dial is titled Limit 2, and the third dial is titled STAB. Each dial has a range from zero to ten. Below the three dials is a blue colored female connection point. Directly above and below this port are two small metal cylinders. These small metal cylinders are used as anchor points for the cable that connects to the female port. Just behind the front panel is the circuit board. The dials and the female port have wires coming from them that secure to the 0-51862-2 board. The remainder of the card features seven large yellow polypropylene capacitors that have their energy storing capacity written on the outer layer. The 0-51862-2 also has a combination of ten transistors either small black semi-circles or silver full circles. The 0-51862-2 also has a series of diodes, resistors, and smaller capacitors, along with some minor surface wiring all placed across a grid pattern.

The 0-51862-2 will be shipped to you in an anti-static bag.

Call or email AX Control for additional details about the 0-51862-2 card, or if you would like to know more about the services we offer, prices on parts and shipping options.

","meta_title":"USAB PC Board","meta_description":"USAB PC Board","keywords":"USAB PC Board","series_page_description":"USAB PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 10:14:52","prod_pdf":[{"id":3081,"product_id":9126,"pdf_id":15627,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15627,"pdf_type_id":1,"file_name":"0-51862-2.pdf","title_tag":"USAB PC Board","alt_tag":"USAB PC Board","created_at":null,"updated_at":null}}]},{"id":9127,"part_number":"0-51864","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CGSA Current Gate Board","short_desc":null,"content":"

The 0-51864 is a CGSA current gate card produced by Reliance Electric. The 0-51864 is no longer actively being manufactured. The 0-51864 is an obsolete power rack card. This card features two control dials on the front panel. These dials have a range of zero to ten. The top dial is titled Current Rate, while the second dial is titled Current Gain. The 0-51864 is a large card with small components on it. The card features eleven small integrated circuits to hold the gate cards programming. The 0-51864 has six polypropylene capacitors ranging from small to large, that store energy for the circuit board. Each capacitor can store a different amount of energy and has its limits written on the side on them. The 0-51864 has five silver transistors to amplify the gate cards energy. The 0-51864 has about fifteen one-way devices called diodes, that only allow energy to move in a single direction. The gate card also has nine carbon composite resistors and over twenty various colored and sized fusible resistors. Most of these components are focused toward that back of the circuit board. The back of the circuit board also has a small metal structure. This metal structure is used to install a smaller circuit board also referred to as a daughter board. This daughter board is not included with the 0-51864 and is sold separately.

To receive your 0-51864 card please reach out to AX Control’s professional staff either by phone or by email. They will be happy to discuss pricing and shipping options.

","meta_title":"CGSA Current Gate Board","meta_description":"CGSA Current Gate Board","keywords":"CGSA Current Gate Board","series_page_description":"CGSA Current Gate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 10:27:47","prod_pdf":[{"id":3082,"product_id":9127,"pdf_id":15628,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15628,"pdf_type_id":1,"file_name":"0-51864.pdf","title_tag":"CGSA Current Gate Board","alt_tag":"CGSA Current Gate Board","created_at":null,"updated_at":null}}]},{"id":8930,"part_number":"0-51864-2","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PRTD Circuit Card","short_desc":"The 0-51864-2 is a Reliance Electric Current Gate Summing Card CGSC","content":"

0-51864-2 Current Gate Summing Card CGSC

The CGSC printed circuit board component, board number 0-51864-2, is a component fabricated by Reliance Electric. It is possible your component may have the logo/manufacturer mark from Baldor-Reliance or from ABB/Asea Brown Boveri depending on the year of its release. The part number should remain the same in all these instances.

The 0-51864-2 functions as a Current Gate Summing Board. It has two rotary dials located on the left side of its front faceplate. These dials connect to potentiometers that are located on the attached printed circuit board. The faceplate also has a push-button reset switch, a red LED indicator labeled “IED,” and a bank of screw connections along the bottom right edge. These connections are labeled 56, 161, 219, 71, 162, and 519. These screw connections wire into the board using black wires.

The circuit board portion of the 0-51864-2 is marked on its surface with an overlying grid pattern. The back portion of the circuit board is taken up by a metal framework made of two metal uprights and three cross braces. This framework supports three auxiliary boards mounted to the motherboard at a ninety-degree angle. This includes a 0-52017 IET relay board and a 0-52017-1 IET comparator board. These boards include transistors, capacitors, resistors, integrated circuits, and diodes. The primary board of the 0-51864-2 has integrated circuits, transistors, resistors, capacitors, and several instances of surface wiring.

If more detailed information about the board’s operation is needed, please refer to publications from Reliance Electric like manuals or data sheets. These publications will also provide information on handling, safety, and proper installation procedures.

","meta_title":"PRTD Circuit Card","meta_description":"PRTD Circuit Card","keywords":"PRTD Circuit Card","series_page_description":"PRTD Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 14:02:29","prod_pdf":[{"id":3079,"product_id":8930,"pdf_id":15629,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15629,"pdf_type_id":1,"file_name":"0-51864-2.pdf","title_tag":"PRTD Circuit Card","alt_tag":"PRTD Circuit Card","created_at":null,"updated_at":null}}]},{"id":8931,"part_number":"0-51865","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":10,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Loop PC Board","short_desc":"The 0-51865 is a Reliance Electric Current Loop Module CLDA","content":"

0-51865 Current Loop Module

The 0-51865 is a Reliance Electric board component designed for use within the company’s various drive systems. The board you are currently replacing may be marked as being manufactured by a different company, such as Baldor-Reliance or ABB/Asea Brown Boveri. Your manual or user guide should specify the same or similar part number.

The 0-51865 functions as a Current Loop Module. It has a silver-colored faceplate attached to the circuit board by three screw connections. The faceplate is populated by two rotary dials. These can be adjusted from zero to ten, and are labeled current rate and current gain. The faceplate is also marked with the part number and includes two screws to lock the component into place within the rack system.

The 0-51865 is populated by two potentiometers. These connect to the rotary dials located on the front faceplate. The board also has carbon composite resistors, metal film resistors, transistors, integrated circuits, ceramic disk capacitors, and capacitors made from other materials. Some capacitors are secondarily supported by board ties. The board has a board rack surrounding the board surface (two metal uprights with two side pieces and a cross brace) that is designed to support auxiliary boards installed at 90-degree angles. However, no auxiliary boards are installed to the board. The motherboard has several lines of pins located on the back portion of the board to allow for auxiliary boards to be installed at a later time if needed.

More information regarding the installation and operation of the 0-51865 may be accessed through publications from Reliance Electric. This includes data sheets, manuals, and user guides.

","meta_title":"Current Loop PC Board","meta_description":"Current Loop PC Board","keywords":"Current Loop PC Board","series_page_description":"Current Loop PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 11:59:58","prod_pdf":[{"id":3077,"product_id":8931,"pdf_id":15630,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15630,"pdf_type_id":1,"file_name":"0-51865.pdf","title_tag":"Current Loop PC Board","alt_tag":"Current Loop PC Board","created_at":null,"updated_at":null}}]},{"id":8932,"part_number":"0-51865-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":13,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Current Board","short_desc":"The 0-51865-1 is a Reliance Electric Current Loop Driver CLDB","content":"

0-51865-1 Current Loop Driver

The 0-51865-1 functions as a Current Loop Driver Board, and is manufactured by Reliance Electric. Due to changes within the company, your board may be marked as manufactured by either ABB/Asea Brown Boveri or by Baldor-Reliance; however, the board part number should still be the same.

The 0-51865-1 is a component-dense board with seven auxiliary boards attached to the motherboard. It is fronted by a faceplate that attaches to the motherboard using screw connections. This faceplate has two rotary-style dials that are marked current rate and current gain. Each dial connects to a potentiometer that is located on the front edge of the circuit board.

The 0-51865-1 is marked on its surface by a grid pattern. The motherboard is populated by two integrated circuits, transistors, capacitors made from polyester vinyl and electrolytic material, and diodes. The motherboard also has a metal rack system attached to its surface comprised of two metal uprights on each board end connected by a metal crossbar and two side pieces. This rack supports seven auxiliary boards that connect to the board at a 90-degree angle. Six of these boards are duplicates of each other and are populated by transistors, capacitors, resistors, and diodes. The last board (placed at the front of the board,) has a different configuration than the other six but shares some of the same components. It also has several ceramic disk capacitors.

More information regarding the operation of the 0-51865-1 may be found through Reliance publications like data sheets, manuals, or user guides. Reliance was responsible for all technical support for this series of boards.

","meta_title":"PC Current Board","meta_description":"PC Current Board","keywords":"PC Current Board","series_page_description":"PC Current Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 11:28:50","prod_pdf":[{"id":3078,"product_id":8932,"pdf_id":15631,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15631,"pdf_type_id":1,"file_name":"0-51865-1.pdf","title_tag":"PC Current Board","alt_tag":"PC Current Board","created_at":null,"updated_at":null}}]},{"id":8933,"part_number":"0-51865-14","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CLDR Module","short_desc":"The 0-51865-14 is a Current Loop Driver Card CLDA","content":"

0-51865-14 CLDA Current Loop Driver card

0-51865-14 belongs to a series of Reliance Electric boards. This component may be used within Reliance Electric drive systems. Depending on the year of its manufacture, it is possible your board is marked with a different manufacturer, including Baldor-Reliance and ABB. The part number of 0-51865-14 should remain the same.

The 0-51865-14 functions as a Current Loop Driver module. There are two primary parts to this. The first of these is a narrow front faceplate with two connector screws that hold the module in place in the rack. The faceplate includes a single rotary dial connected to a potentiometer located on the PCB. This dial is labeled current gain. The faceplate connects to the second major part of the module, the circuit board, by three screws.

The circuit board portion of the 0-51865-14 is marked by a grid pattern across its surface. Most components are not marked by reference designators; however, TP test points are marked. Other components on the board include thirty integrated circuits, capacitors, transistors, resistors, a potentiometer, and diodes. Integrated circuits include analog SPSTs, analog comparators, analog D flip-flops, and analog operational amplifiers. The rear edge of the board extends and is covered in conductive tabs.

Reliance publications like user guides, manuals, and data sheets can be used to access more information regarding the installation, operation, or maintenance of the 0-51865-14. These publications also provide information on handling and safety. Reliance Electric was responsible for providing technical support for this and all other boards in this series.

","meta_title":"CLDR Module","meta_description":"CLDR Module","keywords":"CLDR Module","series_page_description":"CLDR Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 11:08:29","prod_pdf":[{"id":3156,"product_id":8933,"pdf_id":14257,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14257,"pdf_type_id":1,"file_name":"0-51865-14.pdf","title_tag":"CLDR Module | PDF","alt_tag":"CLDR Module | PDF","created_at":null,"updated_at":null}}]},{"id":8934,"part_number":"0-51865-15","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Loop Drive Board","short_desc":"The 0-51865-15 is a Reliance Current Loop Driver Card CLDS","content":"

0-51865-15 Current Loop Driver Card CLDS

The 0-51865-15 is a Reliance Electric component. This board component can be used in various Reliance Electric drives. It may be marked as manufactured by Asea Brown Boveri (ABB) or by Baldor-Reliance. The board number will essentially be the same regardless of manufacturer. The board has been discontinued by the manufacturer and is no longer being produced.

The 0-51865-15 is a Current Loop Driver Card. It is fronted by a silver-colored, narrow faceplate with three rotary dials. Each of these dials connects to a potentiometer that is located on the circuit board. The dials are labeled current rate, current gain, and overlap.

The circuit board component of the 0-51865-15 module is marked with a grid pattern. TP test points on the board are marked with reference designators, but no other components have designators. The board includes thirty integrated circuits, TP test points, transistors, potentiometers, resistors, and capacitors. The board uses ceramic disk capacitors and polyester vinyl axial capacitors. Some of the integrated circuits include Analog AND Gates, operational amplifiers, and analog comparators. The board also has a stub located off the back edge of the board that is covered by conductive tabs. This acts as a type of backplane connector.

More information regarding the board operation can be accessed through Reliance publications like user guides, data sheets, and manuals. These technical support publications will also provide information regarding installation and board operation.

AX Control purchases our inventory from liquidated facilities and surplus overstock stock. We also purchase from our customers. If you would like to know more about our surplus purchasing, click on the link on this page or feel free to contact our staff directly for more information.

","meta_title":"Current Loop Drive Board","meta_description":"Current Loop Drive Board","keywords":"Current Loop Drive Board","series_page_description":"Current Loop Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 10:30:51","prod_pdf":[{"id":3076,"product_id":8934,"pdf_id":15632,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15632,"pdf_type_id":1,"file_name":"0-51865-15.pdf","title_tag":"Current Loop Drive Board","alt_tag":"Current Loop Drive Board","created_at":null,"updated_at":null}}]},{"id":9132,"part_number":"0-51865-16","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Loop PC Board","short_desc":"The 0-51865-16 is a CLDT Current Regulator Loop Drive card from Reliance","content":"

0-51865-16 CLDT Current Regulator Loop Drive Board

The 0-51865-16 is a Reliance Electric board component. This circuit board is most often used within the company’s drive systems. It usually is marked with a Reliance logo, but in some cases may carry a Baldor-Reliance logo instead. In more rare cases, it may originate from Asea Brown Boveri/ABB. In each of these cases, the 51865-16 number will remain in the part ID.

The 0-51865-16 is a Current Regulator Loop Drive card. There are several versions of this board within the board series; please verify before placing your order the version that best meets your needs.

The 0-51865-16 includes two rotary dials on its front faceplate. These are labeled “current rate” and “current gain.” The faceplate also has a reset button, a red LED labeled “IET” and a four-position terminal strip with its own smaller cover. The terminals on this component are labeled 56, 161, 71, and 152. Each rotary dial connects to a potentiometer located on the circuit board. The screw terminals wire into the board’s surface using wired connections.

The 0-51865-16 has a conductive backplane on its rear edge. The edges of the board are ringed by a frame that supports ten vertically mounted auxiliary boards. These boards connect to the motherboard by pin connections. Most of the boards are populated by transistors, ceramic capacitors, polyester vinyl capacitors, and metal film resistors. Other boards may have disk capacitors and integrated circuits. There is an additional board mounted using standoffs and screw connections parallel to the motherboard to the top of the metal frame supports. This board has several transistors, an integrated circuit, metal film resistors, and several surface-wired connections. More information may be found through accessing Reliance manuals or series user guides.

","meta_title":"Current Loop PC Board","meta_description":"Current Loop PC Board","keywords":"Current Loop PC Board","series_page_description":"Current Loop PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 09:31:46","prod_pdf":[{"id":3075,"product_id":9132,"pdf_id":15633,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15633,"pdf_type_id":1,"file_name":"0-51865-16.pdf","title_tag":"Current Loop PC Board","alt_tag":"Current Loop PC Board","created_at":null,"updated_at":null}}]},{"id":8935,"part_number":"0-51865-18","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Current Loop Module","short_desc":"The 0-51865-18 is a Reliance CLDV Current Loop Driver","content":"

0-51865-18 CLDV Current Loop Driver

The 0-51865-18 is a printed circuit board produced by the Reliance Electric Co. Circuit boards fabricated by this company may be marked with the Reliance logo, or they may carry marks from Baldor-Electric, or possibly ABB (Asea Brown Boveri) depending on the year of manufacture. The same part number is used in all instances.

The 0-51865-18 functions as a Current Loop Driver Board. A silver-colored faceplate with a set screw located at its top and its bottom edges fronts the board. The front panel has a single red LED indicator, marked ‘gain limit,’ and two rotary dials. One dial is labeled “rate” and the other “gain.” They can be set from zero to ten. Both dials are backed by potentiometers placed on the rear of the faceplate. The faceplate and the PCB connect via three screws.

The 0-51865-18 is populated by over twenty-five integrated circuits. The board has a line of transistors located along its rear edge. Other components include carbon composite and metal film resistors, polyester vinyl axial and ceramic disk capacitors, TP test points, and diodes. The board uses surface wiring in several places. There is a small auxiliary board mounted to the front center of the board. This component is mounted using one screw connection.

The rear edge of the 0-51865-18 extends into a tail covered in a line of conductive tabs. This tail acts as a sort of backplane. If more information is needed about this board, such as detailed information about installation, maintenance, or specific operation points, this information may be found through Reliance user guides, manuals, or data sheets.

","meta_title":"PC Board Current Loop Module","meta_description":"PC Board Current Loop Module","keywords":"PC Board Current Loop Module","series_page_description":"PC Board Current Loop Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 15:02:47","prod_pdf":[{"id":3155,"product_id":8935,"pdf_id":14259,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14259,"pdf_type_id":1,"file_name":"0-51865-18.pdf","title_tag":"PC Board Current Loop Module | PDF","alt_tag":"PC Board Current Loop Module | PDF","created_at":null,"updated_at":null}}]},{"id":9128,"part_number":"0-51865-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Loop CLDA Board","short_desc":null,"content":"

The 0-51865-2 is a Current Loop CLDC Board created by Reliance Electric. This circuit board features three knobs on the front to control the boards' functions. The first knob is titled Current Rate, the middle knob is titled Current Gain, and the third knob is titled Overlap. Each knob can move on its own and not affect the others. They each have a range of zero to ten, with small notches in between, to customize them for what needs to be done. The surface of the 0-51865-2 is sparse and features sixteen small resistors with stripes, two larger thick film resistors with their abilities written on them, two tiny integrated circuits, a transistor, and a few capacitors. The back of the card features rows of metal pins labeled one through ten. Each line of pins is also labeled THY 1, THY 2, THY 3, THY 4, THY 5, and THY 6, with GATE DRIVERS written in the center of it all. The draw of the 0-51865-2 is that metal pins allow for the CLDC board to hold and use up to six smaller circuit boards. These metal pins insert into a connector on the smaller cards allowing them to share electricity and information. The smaller cards are sold separately, however, they are simple to install. Just unscrew the bracket that runs along the top of the card slide the small cards into place and re-install the upper bracket.

Call or email AX Control’s skilled staff to order your 0-51865-2 board today.

","meta_title":"Current Loop CLDA Board","meta_description":"Current Loop CLDA Board","keywords":"Current Loop CLDA Board","series_page_description":"Current Loop CLDA Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 13:35:02","prod_pdf":[{"id":3074,"product_id":9128,"pdf_id":15634,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15634,"pdf_type_id":1,"file_name":"0-51865-2.pdf","title_tag":"Current Loop CLDA Board","alt_tag":"Current Loop CLDA Board","created_at":null,"updated_at":null}}]},{"id":9133,"part_number":"0-51865-21","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Drive Current CLDA Board","short_desc":"The 0-51865-21 is a CLDY Current Loop Drive board from Reliance Electric","content":"

0-51865-21 CLDY Current Loop Drive board

The 0-51865-21 is a Reliance Electric component. This board and faceplate is most often used within Reliance drive systems and is marked with a Reliance logo. However, in some rare cases, this and other boards in this series may carry a logo from either ABB or from Baldor-Reliance. This board will have the 51865-21 number within its part ID regardless of the manufacturer noted.

The 0-51865-21 functions within drives as a Current Loop Drive card. The attached narrow faceplate has two small rotary dials. These attach to potentiometers located on the circuit board. The dials are labeled rate and gain. The faceplate also has one red LED indicator labeled gain limit. The faceplate includes two set screws that allow technicians to lock the module into place once it has been inserted into a rack system.

The 0-51865-21 is composed of a primary motherboard and an additional auxiliary board that has been mounted in the center of the motherboard using standoffs and screws. The auxiliary is mounted with components facing the surface of the motherboard.

The primary board of the 0-51865-21 is populated by over fifteen integrated circuits, along with over a dozen transistors. The board has capacitors made from ceramic material, including disk capacitors. Other types of capacitors are also used. Resistors are typically made from metal film. Most components mount directly to the surface of the board, but a few components mount above the board surface using quick-connect brass pins. Surface wire connections are used in several places. More information regarding board operation may be found through Reliance publications like user guides or manuals.

","meta_title":"Drive Current CLDA Board","meta_description":"Drive Current CLDA Board","keywords":"Drive Current CLDA Board","series_page_description":"Drive Current CLDA Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 09:47:27","prod_pdf":[{"id":3072,"product_id":9133,"pdf_id":15635,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15635,"pdf_type_id":1,"file_name":"0-51865-21.pdf","title_tag":"Drive Current CLDA Board","alt_tag":"Drive Current CLDA Board","created_at":null,"updated_at":null}}]},{"id":9129,"part_number":"0-51865-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CLDA Current Loop PC Board","short_desc":null,"content":"

The 0-51865-3 is a CLDD Gate control card produced by the Reliance Electric company. The 0-51865-3 uses a power rack to operate. To control the CLDD card once it is properly installed there is two black dials on the left that are labeled Current Rate and Current Gain. There is a large red Reset button a small red LED indicator labeled IET and four screw ports on the bottom right edge. The 0-51865-3 is a large control card with surface wiring and a couple of capacitors in the very center. However, the 0-51865-3 is a card with a framework around the perimeter and across the top of the circuit board. This framework has small slits spaced equal distance apart on either side. These slits are used to store and use up to twelve smaller circuit boards. These circuit boards are also called daughter boards and slide into place easily. They are held in place using the slits on the framework as well as the metal beam with twelve slits that runs down the center of the circuit board. The metal beam is used to secure the cards when the control card is standing upright in the power rack. Where each card is installed is a series of small pins that are labeled one through ten that are plugged into the smaller cards. For additional information about 0-51865-3 and the types of cards, it can hold please refer to the publications released by Reliance Electric.

To order your 0-51865-3 email or call AX Control.

*Daughter boards are not included with the 0-51865-3 and are sold separately.

","meta_title":"CLDA Current Loop PC Board","meta_description":"CLDA Current Loop PC Board","keywords":"CLDA Current Loop PC Board","series_page_description":"CLDA Current Loop PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-11 11:56:08","prod_pdf":[{"id":3073,"product_id":9129,"pdf_id":15636,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15636,"pdf_type_id":1,"file_name":"0-51865-3.pdf","title_tag":"CLDA Current Loop PC Board","alt_tag":"CLDA Current Loop PC Board","created_at":null,"updated_at":null}}]},{"id":9130,"part_number":"0-51865-6","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DRV-CLDA Current Loop Drive Board","short_desc":"0-51865-6 is a CLDB Current Loop Driver from Reliance","content":"

0-51865-6 CLDB Current Loop Driver

The 0-51865-6 is a Reliance Electric circuit board with an attached faceplate. This component is typically used within Reliance drive systems. Most often this component is marked as being made by Reliance, but in some cases, it may have logos from either ABB/Asea Brown Boveri or from Baldor-Reliance. The 51865-6 number will remain as part of the id number in all these situations.

The 0-51865-6 functions as a Current Loop Driver card. The faceplate has two rotary dials located one above each other. These are labeled “current rate” and “current gain.” The faceplate includes two set screws that lock the component into place when it is inserted into a rack system. These are located at the top and the bottom of the faceplate.

The 0-51865-6 has a grid pattern across its top surface. The board has a metal frame with cross supports that rings the entire board. This support is designed to support auxiliary boards like gate drivers if they are installed. These boards are installed at a ninety-degree angle into pin supports located on the board’s surface. The edges of the board insert into scores made in the cross supports.

Other components located on the 0-51865-6 include various capacitors, including ceramic disk, polyester vinyl, and those made from aluminum electrolytic material. The board has both CCR and metal film resistors. Surface wiring is used. There are several transistors and two integrated circuits. More information may be found through Reliance manuals and user guides. Such publications were provided by the OEM as ongoing technical support.

","meta_title":"DRV-CLDA Current Loop Drive Board","meta_description":"DRV-CLDA Current Loop Drive Board","keywords":"DRV-CLDA Current Loop Drive Board","series_page_description":"DRV-CLDA Current Loop Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 08:48:44","prod_pdf":[{"id":3070,"product_id":9130,"pdf_id":15637,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15637,"pdf_type_id":1,"file_name":"0-51865-6.pdf","title_tag":"DRV-CLDA Current Loop Drive Board","alt_tag":"DRV-CLDA Current Loop Drive Board","created_at":null,"updated_at":null}}]},{"id":9131,"part_number":"0-51865-7","revision_type_id":1,"series_id":74,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Circuit Board","short_desc":"0-51865-7 is a Reliance Current Loop Driver","content":"

0-51865-7 Reliance Current Loop Driver CLDA

The 0-51865-7 is a circuit board and attached faceplate fabricated by Reliance Electric. This board is most often used in Reliance drives and is typically marked with a Reliance logo. However, in some rare cases, the component may be labeled as coming from Baldor-Reliance or from ABB. In all these cases, the 51865-7 number will still be part of the part ID.

The 0-51865-7 is a Current Loop Driver card. The attached faceplate is empty except for two set screws (top and bottom of the panel) used to lock the component into place within a rack system. These set screws are finger tightened.

The 0-51865-7 has a surface printed with a grid pattern. The short edges of the board are populated by metal frames that are connected by two side pieces and a metal top brace. These connecting pieces support seven auxiliary cards that have been added to the motherboard at a ninety-degree angle. The majority of these cards are Reliance number 52012-4. They are populated by a transistor, by CCR and metal film resistors, by diodes, and by capacitors made from several different materials. The motherboard also has disk capacitors, polyester vinyl, and other capacitors, diodes, and metal film resistors.

Publications originally provided by Reliance Electric will furnish more detailed information on the operation of the 0-51865-7. These publications (manuals/data sheets/user guides) will also have information pertaining to the installation and maintenance of this module. Safety and handling procedures will be available in these publications.

","meta_title":"Reliance Electric Circuit Board","meta_description":"Reliance Electric Circuit Board","keywords":"Reliance Electric Circuit Board","series_page_description":"Reliance Electric Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 09:10:25","prod_pdf":[{"id":3071,"product_id":9131,"pdf_id":15638,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15638,"pdf_type_id":1,"file_name":"0-51865-7.pdf","title_tag":"Reliance Electric Circuit Board","alt_tag":"Reliance Electric Circuit Board","created_at":null,"updated_at":null}}]},{"id":8936,"part_number":"0-51865-9","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CLDA Loop Board","short_desc":"The 0-51865-9 is a Reliance Current Loop Module CLDK","content":"

0-51865-9 Current Loop Module CLDK

The 0-51865-9, produced by Reliance Electric, is a circuit board designed for use within various drives. Some versions of this component may be marked as manufactured by ABB/Asea Brown Boveri or by Baldor-Reliance; however, the part number remains the same.

The 0-51865-9 is an Electric Current Loop Module. This module includes a circuit board with a silver-colored faceplate attached using three screws. The faceplate includes two rotary dials that are labeled rate and gain. These are each connected to potentiometers. The faceplate also has a single red LED indicator that is labeled gain limit.

The board component of the 0-51865-9 has a printed grid pattern on its surface. This is marked by letters and numbers. Reference designators are typically not used, but a few components, like test points, are marked. Components on the board include thirty-four integrated circuits, transistors, TP test points, diodes, surface wiring, resistors, and various types of capacitors. Both ceramic disk and axial polyester vinyl capacitors are used on the board. The back board edge extends into a tail that is covered by conductive tabs.

The 0-51865-9 is marked with the code 407 802288-13A. It is marked (813) on the back edge. The board number is printed on the bottom board edge. If more detailed information is desired, such as information regarding board operation, maintenance, or board installation, please refer to publications originally provided by Reliance Electric such as data sheets, manuals, or user guides.

Our company maintains a multi-million dollar inventory of industrial automation parts that includes products from manufacturers like General Electric, Horner, Fuji Electric, Reliance Electric, and Eurotherm.

","meta_title":"CLDA Loop Board","meta_description":"CLDA Loop Board","keywords":"CLDA Loop Board","series_page_description":"CLDA Loop Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 09:39:32","prod_pdf":[{"id":3069,"product_id":8936,"pdf_id":15639,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15639,"pdf_type_id":1,"file_name":"0-51865-9.pdf","title_tag":"CLDA Loop Board","alt_tag":"CLDA Loop Board","created_at":null,"updated_at":null}}]},{"id":8937,"part_number":"0-51874","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":11,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Static Sequence Module","short_desc":"The 0-51874 is a Reliance Static Sequence Card Module","content":"

0-51874 Static Sequence Card Module

The 0-51874 is a control board manufactured by Reliance Electric for use within the company’s drive systems. Other possible manufacturer names that could appear on your equipment include Baldor-Reliance or ABB/Asea Brown Boveri. The 0-51874 remains the same.

The 0-51874 functions as a Static Sequence Card module. This is a single board component fronted by a faceplate. The faceplate connects to the circuit board using screw connections threaded through factory drilled holes. The faceplate includes two mounting screws to lock the board into the rack system, a single red LED indicator labeled “1 S Relay is energized when light is on,” and a bank of six screws for other connections. These connections are labeled 1 / 2 Start, 3 / 4 M Aux, and 5 / 6 M Coil. These connections wire to the board using black and yellow wires.

The 0-51874 is populated by various components. The board is marked with a grid pattern, the board number, and with the Reliance logo, but the components are not marked with reference designators. Board components include two relays, eight integrated circuits, surface wiring, diodes, transistors, metal film, and carbon composite resistors, and various capacitors. Capacitors include disk capacitors, aluminum electrolytic, and polyester vinyl. Some capacitors are supported secondarily by zip tie connections threaded through the board’s surface.

If detailed information on installation, board operation or maintenance is required, please refer to publications supplied by Reliance Electric as ongoing technical support, such as manuals, data sheets, and user guides. These publications will also provide detailed handling and safety information.

","meta_title":"Static Sequence Module","meta_description":"Static Sequence Module","keywords":"Static Sequence Module","series_page_description":"Static Sequence Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 08:49:37","prod_pdf":[{"id":3067,"product_id":8937,"pdf_id":15640,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15640,"pdf_type_id":1,"file_name":"0-51874.pdf","title_tag":"Static Sequence Module","alt_tag":"Static Sequence Module","created_at":null,"updated_at":null}}]},{"id":9220,"part_number":"0-51874-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Sequencer Board","short_desc":"Reliance Static Sequence Card SSCA","content":"

0-51874-1 SSCA Static Sequence Card Module

The 0-51874-1 is a PCB component fabricated by Reliance. It is typically used within Reliance drives. In certain cases, this board component may come from manufacturers like Asea Brown Boveri or Baldor-Reliance. The 51874-1 number will be reflected in the part id.

The 0-51874-1 is a Static Sequence Module. It includes a faceplate attached to a circuit board. These two components connect via three screws threaded from the bottom of the circuit board. The faceplate has a single LED indicator with the notation that “1 S Relay is energized when light is on” located directly underneath it. The faceplate also has a six-position terminal strip located on its bottom right edge. This is covered by its own smaller cover by two screws.

The 0-51874-1 does not have reference designators next to components. The board is marked with a grid. Components include eight integrated circuits, two relays mounted to metal frames that use two screws each to secure themselves to the PCB, diodes, transistors, surface wiring, capacitors of various materials, and resistors. Both metal film and carbon composite resistors are used. The terminal strip in the faceplate wires to the relays using yellow and black surface wiring. The rear edge of the board extends in a conductive tail that acts as a backplane.

Installation and operation instructions can be found through publications like user guides, data sheets, and manuals from Reliance Electric. As a static-sensitive component, the 0-51874-1 will ship from our North Carolina facility wrapped in an anti-static product and carefully boxed to protect it during transit.

AX Control offers several ways to lower our already competitive prices. Follow the links on this page to find out about our exchange credit programs, surplus purchasing, and other programs.

","meta_title":"Sequencer Board","meta_description":"Sequencer Board","keywords":"Sequencer Board","series_page_description":"Sequencer Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-15 15:00:30","prod_pdf":[{"id":3068,"product_id":9220,"pdf_id":15641,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15641,"pdf_type_id":1,"file_name":"0-51874-1.pdf","title_tag":"Sequencer Board","alt_tag":"Sequencer Board","created_at":null,"updated_at":null}}]},{"id":8938,"part_number":"0-51874-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Static Sequence Card","short_desc":"The 0-51874-2 is a Reliance SSCC Electronic Module","content":"

0-51874-2 SSCC Electronic Module

The 0-51874-2 is a printed circuit board component fabricated by the Reliance Electric Co. In some cases, these parts may be marked as parts from Baldor-Reliance or ABB (Asea Brown Boveri.) The part number remains the same.

The 0-51874-2 functions as an SSCC Electronic Module. The board is fronted by a narrow faceplate that attaches to the board by three screw connections. Additionally, the board is factory drilled along its rear edge. This edge also has a central tab that extends from it that is covered by small conductive points. The front faceplate is marked with the Reliance logo, the board number, and also has two LED indicators embedded into its surface. Both indicators are red, and each is wired into the board surface using two metal prongs. The first of these components is labeled “Major Loop On (1S)” and the second is labeled “Minor Loop On (2S.)”

The surface of the 0-51874-2 is covered with a grid pattern. One axis of this pattern is labeled with numbers, the other by letters. Components on the board include eight integrated circuits, diodes, metal film resistors, wire wound resistors, TP test points, transistors, and various capacitors. Capacitors include ceramic disk capacitors, polyester vinyl axial capacitors, aluminum electrolytic capacitors, and capacitors made of other material. The board also has two Omron 24 VDC contact resistive relays.

More information regarding subjects such as board operation, maintenance or detailed installation instructions may be found through Reliance publications like data sheets, manuals, or user guides.

The AX Control warehouse is located in central North Carolina, just south of Raleigh. Our team is happy to quote shipping to your location before your order is placed, upon request.

","meta_title":"Static Sequence Card","meta_description":"Static Sequence Card","keywords":"Static Sequence Card","series_page_description":"Static Sequence Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-29 08:25:40","prod_pdf":[{"id":3154,"product_id":8938,"pdf_id":14262,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14262,"pdf_type_id":1,"file_name":"0-51874-2.pdf","title_tag":"Static Sequence Card | PDF","alt_tag":"Static Sequence Card | PDF","created_at":null,"updated_at":null}}]},{"id":18031,"part_number":"0-51879","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD PRL GATE AMP-PGAF","short_desc":null,"content":"

The 0-51879 is a PGAA GATE AMPLIFIER MODULE PCB CIRCUIT BOARD produced by Reliance Electric. The 0-51879 is a power rack style board, meaning the circuit board slides into a power rack to function. The front panel of the 0-51879 has PGAA written at the top left and 0-51879 written on the bottom left for identification purposes while the drive is installed into the power rack. There is a set of four female connectors on the front panel as well. Each female connector has anchor points at the top and bottom to secure the cable that plugs into it. Each port is also labeled: C10, C11, C12, and C13. The circuit board that is connected to the faceplate has six bipolar transistors in a row across the top. In the center of the 0-51879 card is six transformers in a row. The bottom edge of the 0-51879 card has eight dark gray thick film resistors in a row. There are also twelve dark brown carbon compotation resistors and eighteen small bead shaped diodes with a small line at one end, strategically placed around the large components of the circuit board. There is also a large metal wrapped capacitor on the back edge. One edge of the capacitor is behind the bipolar transistors and the other end is behind the row of transformers. The female connectors on the front panel each have a series of wires that connect to various points on the circuit board.

Allow AX Control to provide you with a quote.

","meta_title":"RELIANCE ELECTRIC PC BOARD PRL GATE AMP-PGAF","meta_description":"RELIANCE ELECTRIC PC BOARD PRL GATE AMP-PGAF","keywords":"RELIANCE ELECTRIC PC BOARD PRL GATE AMP-PGAF","series_page_description":"RELIANCE ELECTRIC PC BOARD PRL GATE AMP-PGAF","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-18 10:23:53","prod_pdf":[]},{"id":8939,"part_number":"0-51879-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Amplifier with PRL Gate","short_desc":"The 0-51879-1 is a Reliance PGAB Gate Amplifier Board","content":"

0-51879-1--PGAB Gate Amplifier Circuit Board

The 0-51879-1 is a circuit board component fabricated for use within various drives by Reliance Electric. Due to various mergers and changes, the board you are replacing may have been manufactured by Reliance Electric, Baldor-Reliance, or by ABB, also known as Asea Brown Boveri. The part number is the same.

The 0-51879-1 is a PGAB Gate Amplifier board. The PCB is fronted by a silver-colored faceplate with four (female) plug connectors located one above each other along its right edge. These plugs are labeled C10 through C13. The front panel also includes the board number. The faceplate connects to the main circuit board via three screws.

The 0-51879-1 is populated by six transformers mounted in frames. A bipolar transistor is located to one side of each transformer and is attached via a surface wired connection. Other components on the board surface include diodes, disk capacitors, carbon composite resistors, and capacitors of other materials. One large aluminum electrolytic capacitor uses a zip tie to connect it to the board for extra support. The back edge of the board is designed as a protruding tail. This tail is populated by multiple conductive tabs. It acts as a backplane connector for the board. The board’s surface is marked in a grid pattern. One of the grid’s axes is marked by numbers and the other is marked by letters. Components are not marked by reference designators. If more information about components is needed, please refer to publications originally distributed by Reliance, such as manuals, user guides, and data sheets. These publications will also provide information on installation procedures.

","meta_title":"Amplifier with PRL Gate","meta_description":"Amplifier with PRL Gate","keywords":"Amplifier with PRL Gate","series_page_description":"Amplifier with PRL Gate","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 08:00:09","prod_pdf":[{"id":3063,"product_id":8939,"pdf_id":15642,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15642,"pdf_type_id":1,"file_name":"0-51879-1.pdf","title_tag":"Amplifier with PRL Gate","alt_tag":"Amplifier with PRL Gate","created_at":null,"updated_at":null}}]},{"id":8940,"part_number":"0-51879-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Drive Board","short_desc":"The 0-51879-4 is a Reliance Printed Gate Driver Amplifier","content":"

0-51879-4--Printed Gate Drive Amplifier

The 0-51879-4 is a circuit board component manufactured by the Reliance Electric Company. The board you are currently replacing may be marked as manufactured by a different manufacturer, like ABB (Asea Brown Boveri) or Baldor-Reliance. This is due to changes in the business structure of Reliance Electric. The part number for this component remained the same across changes in the company structure.

The 0-51879-4 functions as a Printed Gate Drive Amplifier. This includes two primary parts married together with three screw connections. The first of these parts is a front faceplate with four female plugs. Plugs located on the faceplate are individually labeled. Each plug connects to the second primary component, the circuit board, using black surface wires.

The circuit board portion of the 0-51879-4 is marked across its surface with a grid pattern. The axes of this grid are marked with letters on one side and with numbers five through eighty on the other. The front half of the PCB only has a few components on its bottom edge. The back half has several lines of components. This includes a line of six transistors, a line of six ceramic disk capacitors, a line of six integrated circuits, and lines of diodes, resistors, and capacitors. Additional components are located along the bottom edge. The rear edge of the board extends into a tab covered in a conductive material. This tab acts as a sort of backplane for the board. If more information is desired, please refer to Reliance publications like manuals or data sheets.

","meta_title":"Reliance Electric Drive Board","meta_description":"Reliance Electric Drive Board","keywords":"Reliance Electric Drive Board","series_page_description":"Reliance Electric Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 16:20:42","prod_pdf":[{"id":3064,"product_id":8940,"pdf_id":15643,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15643,"pdf_type_id":1,"file_name":"0-51879-4.pdf","title_tag":"Reliance Electric Drive Board","alt_tag":"Reliance Electric Drive Board","created_at":null,"updated_at":null}}]},{"id":8941,"part_number":"0-51879-5","revision_type_id":1,"series_id":74,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PGAF PRL Gate Amplifier Board","short_desc":"The 0-51879-5 is a PRL Gate Amplifier Module","content":"

0-51879-5 PRL Gate Amplifier Module PGAF

The 0-51879-5 is a PCB board component fabricated by Reliance Electric for use with various Reliance drives. The 0-51879-5 is no longer manufactured. This board may be marked as being from Reliance Electric, or it may be marked as being from Asea Brown Boveri (ABB) or from Baldor Reliance. The board number will be the same.

The 0-51879-5 functions as a PRL Gate Amplifier Module. The component has a front faceplate attached with four plug connectors (female) lined up on the right edge. These plugs are heavily wired on the rear surface of the front panel. Some of these wires attach to the board surface.

The circuit board part of the 0-51879-5 attaches to the front faceplate using screw connections. The PCB is marked with a grid pattern that is marked on one axis with numbers (five through eighty by fives,) and on the other axis by letters (A through BD.) The front half of the board is essentially empty barring a few capacitors and resistors. The rear of the board is populated with diodes, capacitors, integrated circuits, transistors, and disk capacitors. The rear edge of the board has a tail that extends from it that is populated with multiple conductive tabs.

More information about this board can be found through publications originally provided by Reliance Electric. This includes individual PCB data sheets, product manuals, and series user guides. Reliance Electric provided all the technical support for this board when it was originally released. Safety and installation procedures will be available within Reliance publications.

","meta_title":"PGAF PRL Gate Amplifier Board","meta_description":"PGAF PRL Gate Amplifier Board","keywords":"PGAF PRL Gate Amplifier Board","series_page_description":"PGAF PRL Gate Amplifier Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 16:24:10","prod_pdf":[{"id":3153,"product_id":8941,"pdf_id":14265,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14265,"pdf_type_id":1,"file_name":"0-51879-5.pdf","title_tag":"PGAF PRL Gate Amplifier Board | PDF","alt_tag":"PGAF PRL Gate Amplifier Board | PDF","created_at":null,"updated_at":null}}]},{"id":13149,"part_number":"0-51881-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"External Terminal Board","short_desc":null,"content":"

The 0-51881-1 is a PC Board created by Reliance electric. This board may have also been sold under the names Allen Bradley, Asea Brown Boveri, and Baldor Reliance. It may also be listed under the alternate part number O-51881-1. This board has been retired by the manufactured and is now considered to be an obsolete part. AX Control does, however, maintain this part as a refurbished or new surplus stock item.

The 0-51881-1 is an External Terminal Board (ETCB). It has a black narrow front faceplate with two sets of screws to lock it into place on the rack system it goes on. This board is blank except for a wire mounting bracket and a series of 20 split wires. These wires are sheathed in a gray covering and lead to a black external terminal strip that can be separately mounted. This board also includes a conductive backplane connector that connects it to the rack system.

For more information about the 0-51881-1 or its installation, please consult the Reliance Electric produced user manual or datasheet for this PC Board. If you have misplaced this information, please let one of AX Control’s representatives know as you are purchasing the 0-51881-1 and we will assist you in finding a replacement manual if possible.

AX Control offers a large array of shipping options for the 0-51881-1. As long as it is in stock, if you order this part by 4 pm today we can ship it out today. If you have any questions about the 0-51881-1 or it’s compatibility with the current system you are running, please contact us directly at 1-919-372-8413 or via email.

","meta_title":"External Terminal Board","meta_description":"External Terminal Board","keywords":"External Terminal Board","series_page_description":"External Terminal Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-23 09:34:35","prod_pdf":[]},{"id":16310,"part_number":"0-51881-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"External Terminal Board","short_desc":null,"content":"

0-51881-3 External Terminal Board

The 0-51881-3 is a Reliance Electric board component manufactured to be used in the company’s drives. Your original 51883-3 board component could have shipped from manufacturers ABB or Baldor Reliance, both companies that at different times were responsible for Reliance board components. If you have any questions about compatibility, please speak to our team.

The 0-51881-3 is an essentially blank board component. It is a circuit board connected to a faceplate with two set screws to lock it into place. The circuit board has a conductive backplane connector to plug into the rack system. The board has an arcing line of numbers halfway across its surface. These numbers, from one to twenty, line up with small holes in the board’s surface. Further forward, just behind the faceplate, there is a single cable connected to the board’s surface by a clamp. Ten individual colored wires extend from this cable and connect to the first ten of these numbered holes. The cable extends through a hole in the faceplate and connects to a movable, external terminal strip. These are the only components on the board.

Technical support products like user guides, data sheets, and product manuals will provide more information about the 0-51881-3, including specific guidelines for installation.

","meta_title":"External Terminal Board","meta_description":"External Terminal Board","keywords":"External Terminal Board","series_page_description":"External Terminal Board","quote_description":null,"inventory_notes":"box in bad condition","cross_reference":"","created_at":null,"updated_at":"2019-05-01 13:27:05","prod_pdf":[]},{"id":8942,"part_number":"0-51884","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LSCA Module","short_desc":"The 0-51884 is a Reliance Logic Signal Conditioning Board LSCA","content":"

0-51884 LSCA Logic Signal Conditioning Board

The 0-51884 is a Reliance Electric board component manufactured for use within various Reliance drives. This board is no longer manufactured. The board you are replacing may have originally been manufactured by Reliance Electric, by Baldor Reliance, or by Asea Brown Boveri (ABB.) The part number should remain the same.

The 0-51884 functions as a Logic Signal Conditioning Board. The board is fronted by a faceplate with three rotary dials. Each of these dials can be set anywhere between zero to ten. The dials are labeled Tach Calibrate, Reference Calibrate, and Arm. Volt. Calibrate. The front panel also includes two set screws to hold the board in place within the rack, the board number, and the Reliance logo. This faceplate connects to the circuit board via three screws.

The 0-51884 has multiple components. Board components are not marked with reference designators. Each of the rotary dials mentioned above is backed on the rear side of the faceplate with a potentiometer. These potentiometers wire into the board using black and orange braided wires that connect to points on the board. There are several other instances of surface wiring with wiring from point to point on the board. There are disk capacitors, polyester vinyl capacitors, diodes, metal film resistors, transistors, and integrated circuits on the board surface. The board has a tail that extends from the rear edge. This tail is covered by conductive tabs. More information can be found through publications from Reliance like manuals or user guides. Use these publications if more information is needed regarding installation or safety procedures.

","meta_title":"LSCA Module","meta_description":"LSCA Module","keywords":"LSCA Module","series_page_description":"LSCA Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-27 15:31:22","prod_pdf":[{"id":3065,"product_id":8942,"pdf_id":15644,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15644,"pdf_type_id":1,"file_name":"0-51884.pdf","title_tag":"LSCA Module","alt_tag":"LSCA Module","created_at":null,"updated_at":null}}]},{"id":9134,"part_number":"0-51884-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Drive Board","short_desc":"The 0-51884-1 is a LSCA Reliance board","content":"

0-51884-1 LSCA Reliance Electric Drive board

The 0-51884-1 is a PCB printed circuit board from Reliance Electric. This component is used within Reliance drive systems.

The 0-51884-1 is comprised of a narrow faceplate connected to a circuit board. The faceplate includes three rotary dials and two set screws. The rotary dials each connect to potentiometers that are located to the rear of the faceplate and are attached to the surface of the circuit board. These dials are labeled “tach calibrate,” “reference calibrate,” and “arm. Volt calibrate.” Set screws are typically finger tightened, and are designed to lock the module into place once it is inserted into its place within a rack system.

The 0-51884-1 is printed on its surface with a grid pattern. It is populated by seventeen integrated circuits, transistors, ceramic capacitors, polyester vinyl capacitors, diodes, and resistors. Surface wiring is used to connect faceplate components into the board. It is also used in other places on the board.

The 0-51884-1 is marked with the Reliance Electric logo. In some cases, this board may come from ABB or from Baldor-Reliance, due to changes in company structure. The part number (0-51884-1) will still be the same regardless of the manufacturer.

More detailed information about the 0-51884-1 and its operation or installation may be found through Reliance publications. This includes data sheets and manuals. User guides will also have information pertaining to safety and handling procedures.

At AX Control, we store and ship all static-sensitive products using an anti-static wrap to provide a level of added protection. Please let our team know if you would like a shipping quote ahead of purchase; we will be happy to provide one.

","meta_title":"Reliance Electric Drive Board","meta_description":"Reliance Electric Drive Board","keywords":"Reliance Electric Drive Board","series_page_description":"Reliance Electric Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 10:04:25","prod_pdf":[{"id":3066,"product_id":9134,"pdf_id":15645,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15645,"pdf_type_id":1,"file_name":"0-51884-1.pdf","title_tag":"Reliance Electric Drive Board","alt_tag":"Reliance Electric Drive Board","created_at":null,"updated_at":null}}]},{"id":13150,"part_number":"0-51887","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CCTA CONTROL MODULE PCB CIRCUIT BOARD","short_desc":null,"content":"

0-51887 CCTA

The 0-51887 is a circuit board component fabricated by Reliance Electric for use in the company’s drives systems.

The 0-51887 is made up of a circuit board attached to a front faceplate. The faceplate is a silver component connected to the PCB using screws connected through factory-drilled tabs to the bottom of the board. The faceplate is devoid of components except for two set screws used to lock the 0-51887 into place within the rack system, and a 10-position terminal strip component. Each position on the terminal strip is individually numbered. The numbers are 192 through 194, 319, 57, 292 through 294, 419, and 57. Each of these terminal positions wires to a terminal pin located along the front edge of the board.

A grid is printed on the front surface of the 0-51887. The circuit board has an extended center back edge that functions as a backplane connector. The board itself is nearly empty, with only three lines of components near the center back. These include twelve diodes, resistors, a ceramic disk capacitor, and a transistor.

The rear surface of the circuit board is marked with several codes. The front surface has the board ID and the Reliance logo. For additional information regarding board operation or installation, please refer to publications like data sheets and manuals. Reliance technical support publications may sometimes be found under the company names of Asea Brown Boveri, Rockwell Automation, or Baldor-Reliance.

AX Control takes extra care with every static-sensitive board we ship. This product will be wrapped in an anti-static sleeve before it is carefully packed and boxed for shipment.

","meta_title":"CCTA CONTROL MODULE PCB CIRCUIT BOARD","meta_description":"CCTA CONTROL MODULE PCB CIRCUIT BOARD","keywords":"CCTA CONTROL MODULE PCB CIRCUIT BOARD","series_page_description":"CCTA CONTROL MODULE PCB CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-26 13:44:50","prod_pdf":[]},{"id":16311,"part_number":"0-51890","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DPSF Phase Sequence Power Supply","short_desc":"DPSA Dual 5.5 Volt Power Supply","content":"

0-51890 DPSA Dual 5.5 Volt Power Supply

The 0-51890 is a Power Supply module fabricated by Reliance Electric.

The 0-51890 module includes an extra-wide front faceplate. The faceplate includes two toggle switches located in its center, one labeled 1 Amp and the other labeled 5 Amp. Each switch is paired with a red LED indicator and a slotted adjusting knob. The faceplate has a terminal strip running down both its right and left sides. The left terminal strip is numbered one through eleven and the right is numbered twelve through twenty-two. Both terminal strips include a cover.

The front faceplate attaches to a frame that creates a box with components inside and out of it. If looking at the front of the whole, the left side of this module is populated by two large heat sinks held to a metal carrier by standoffs. Directly to the rear is a second metal carrier with two double terminal strips attached to its exterior. These terminal strips have multiple surface wires attached. If looking from the front, the right side of the module is a circuit board component mounted to the framework using multiple screw connections. This board has a printed grid pattern on its surface and carries components on its surface like transistors (including a bipolar transistor,) resistors, capacitors, and terminal pins. A significant number of wires connect to this board via the front edge and from the inside of the module through a drilled opening in the right bottom corner.

Additional components are mounted within the external framework of the 0-51890 module, including a small circuit board with two polyester vinyl capacitors and two resistors. For complete information regarding this module and its setup, please consult Reliance technical support publications.

","meta_title":"DPSF Phase Sequence Power Supply","meta_description":"DPSF Phase Sequence Power Supply","keywords":"DPSF Phase Sequence Power Supply","series_page_description":"DPSF Phase Sequence Power Supply","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-05-01 11:06:08","prod_pdf":[]},{"id":9137,"part_number":"0-51890-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DPSB 250V Power Supply Board","short_desc":"The 0-51890-1 is a DPSB Power Supply 250V from Reliance","content":"

0-51890-1 DPSB Power Supply board 250 V

The 0-51890-1 is a Power Supply module manufactured by Reliance Electric. This board and attached faceplate are designed to be used within Reliance drives. While it typically is marked with a Reliance logo, in some cases this component may originate from Baldor Reliance, or in more rare instances, from ABB.

The 0-51890-1 has a wide front panel populated with two set screws (top and bottom) that lock the module into place once it is set in place in a rack system. The module has one LED indicator and a large terminal strip covered by its own removable cover. This terminal strip is numbered from one to seven, and is labeled below its bottom edge as “250 Volt Power Supply.” The front panel has a small opening to allow wires from the circuit board to reach the terminal strip.

The 0-51890-1 is populated by three bipolar transistors mounted to heat sinks. Surface wires attach to the poles of these components. The board has a single large transformer, several wire-wound resistors, along with CCR resistors, diodes, and capacitors made from electrolytic material and from polyester vinyl. The board has several stab-on connectors. The rear edge of the board is populated by a metal board that carries several more screw mounted components.

Reliance Electric has more information available on the 0-51890-1 regarding its operation and installation. This can be found through publications like manuals and user guides. Please read and follow all recommended handling and safety procedures.

","meta_title":"DPSB 250V Power Supply Board","meta_description":"DPSB 250V Power Supply Board","keywords":"DPSB 250V Power Supply Board","series_page_description":"DPSB 250V Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 11:13:27","prod_pdf":[{"id":3061,"product_id":9137,"pdf_id":15646,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15646,"pdf_type_id":1,"file_name":"0-51890-1.pdf","title_tag":"DPSB 250V Power Supply Board","alt_tag":"DPSB 250V Power Supply Board","created_at":null,"updated_at":null}}]},{"id":9135,"part_number":"0-51890-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DPSD Power Supply Board","short_desc":"The 0-51890-3 is a Reliance DPSD Power Supply 115 VAC Input","content":"

0-51890-3 DPSD Power Supply 115 VAC Input

The 0-51890-3 is a Reliance Electric board and faceplate module designed for use within the company’s drives. This module typically comes from Reliance Electric, but in some cases, it may originate from either Asea Brown Boveri/ABB or from Baldor-Reliance. The part will reflect the 51890-3 in all cases.

The 0-51890-3 is a Power Supply board (115 VAC Input.) The module has a wide faceplate that includes two LED indicators that are simply labeled as “A” and “B.” These are located above an armature “on” switch. The front panel also includes a terminal strip with four positions. This terminal strip has a smaller cover that screw mounts to its surface. The four terminals are numbered from one to four. The entire terminal strip is labeled “115 V.A.C. Input.”

The 0-51890-3 is populated by a transformer component. Screws connect this to the board’s surface. It has a bipolar transistor mounted to a board that is connected to the primary board at a 90-degree angle. The board also has an additional auxiliary board (0-51890-3) mounted to its surface using standoffs and screw mounts. There are four large polyester vinyl capacitors located on the motherboard under this component The 0-51890-3 auxiliary is populated by CCR and metal film resistors, two potentiometers, transistors, and capacitors of various materials. The board communicates with the motherboard via several surface wire connections that connect from the board’s edge to a terminal strip located on the back edge of the primary board.

Please refer to Reliance publications (manuals/user guides) for more detailed information regarding board installation, safety procedures, or operation.

","meta_title":"DPSD Power Supply Board","meta_description":"DPSD Power Supply Board","keywords":"DPSD Power Supply Board","series_page_description":"DPSD Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 10:25:44","prod_pdf":[{"id":3062,"product_id":9135,"pdf_id":15647,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15647,"pdf_type_id":1,"file_name":"0-51890-3.pdf","title_tag":"DPSD Power Supply Board","alt_tag":"DPSD Power Supply Board","created_at":null,"updated_at":null}}]},{"id":8943,"part_number":"0-51890-5","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DPSF Phase Sequence Power Supply","short_desc":"The 0-51890-5 is a DPSF Phase Sequence Circuit board","content":"

0-51890-5 DPSF Phase Sequence Circuit board

The 0-51890-5 is a component fabricated by Reliance Electric as part of their various drive systems. In some cases, boards from Reliance Electric will not carry the company name but rather will be marked as being manufactured by Baldor-Reliance or by Asea Brown Boveri (ABB.) The part number is the same in all these cases.

The 0-51890-5 includes a front faceplate that attaches to the circuit board by three screws threaded through factory made drill holes. The silver faceplate is marked with the Reliance logo and with the board number. It has a single light indicator that is marked “phase sequence.” The LED is wired to the board by two wires.

The 0-51890-5 has a printed gird located on the top surface of the circuit board. One of the grid axes is designated by letters, the other by numbers. The board components are not marked by reference designators.

The 0-51890-5 only has a few components on the board’s surface. This includes two types of diodes, resistors, a polyester vinyl capacitor, and several large axial electrolytic capacitors. The rear edge of the board is drilled in one location. This edge extends into a tab. The tab is covered by conductive material.

If more information is required about the board, such is specific operation information or information regarding handling or installation, please refer to publications from Reliance such as data sheets, manuals, or user guides.

Our warehouse is located south of Raleigh, North Carolina. All static-sensitive boards are stored and shipped protected by an anti-static wrap. If you would like a shipping quote to your location, we are happy to provide this upon request.

","meta_title":"DPSF Phase Sequence Power Supply","meta_description":"DPSF Phase Sequence Power Supply","keywords":"DPSF Phase Sequence Power Supply","series_page_description":"DPSF Phase Sequence Power Supply","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-28 16:51:34","prod_pdf":[{"id":3152,"product_id":8943,"pdf_id":14267,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14267,"pdf_type_id":1,"file_name":"0-51890-5.pdf","title_tag":"DPSF Phase Sequence Power Supply | PDF","alt_tag":"DPSF Phase Sequence Power Supply | PDF","created_at":null,"updated_at":null}}]},{"id":9136,"part_number":"0-51890-6","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit Board","short_desc":"0-51890-6 DPSG Phase Sequence board from Reliance","content":"

0-51890-6 DPSG Phase Sequence board

The 0-51890-6 is a module manufactured by Reliance Electric. This circuit board and the attached faceplate is designed for use in Reliance drives.

The 0-51890-6 functions as a Phase Sequence board. The attached faceplate is populated by a single light component that is placed in the upper third of the panel, and a four-screw terminal strip located in the bottom third. Both of these components wire into the board using surface wires. The panel also has two set screws designed to lock the module in place in the rack system. These are typically finger-tightened.

The 0-51890-6 is populated by three transformers mounted into frames. Each transformer is marked TR-11968. The frames of these components screw to the board surface. Each transformer has several multi-colored wires that connect to the board’s surface. The board has carbon composite resistors, metal film resistors, and a single wire wound resistor. It has capacitors made from several different materials including polyester vinyl and aluminum electrolytic. Several of these components require secondary support and are connected to the board using zip ties. The board also has several rows of diodes. A metal plate is mounted to two standoffs near the rear board edge.

If more information regarding the operation of the board is desired, please consult publications from Reliance like their data sheets or manuals. User guides will have more information regarding important safety and handling procedures.

Our team will be happy to provide a shipping quote from our facility in North Carolina to yours, upon request.

","meta_title":"Circuit Board","meta_description":"Circuit Board","keywords":"Circuit Board","series_page_description":"Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 10:55:08","prod_pdf":[{"id":3060,"product_id":9136,"pdf_id":15648,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15648,"pdf_type_id":1,"file_name":"0-51890-6.pdf","title_tag":"Circuit Board","alt_tag":"Circuit Board","created_at":null,"updated_at":null}}]},{"id":16801,"part_number":"0-51893","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC CONTROL BOARD FIELD CONTROLLER","short_desc":null,"content":"

The 0-51893 is a PC field controller by Reliance Electric. This device is four inches wide and five inches long. The 0-51893 has a faceplate that has FCCD in the top left corner next to the upper screw that secures the 0-51893 into place. The front of this panel has a black section with twelve openings drilled into it, not including the two holes that allow the black panel to be secured to the front. Some of the holes on this black panel are labeled. They are marker one hundred and eighty-one (181), one hundred and eighty-two (182), F1 and F2. The black section has four wires connected to it that are brought together with zip ties and fed through a small opening on the top right side of the black panel. The bottom of the front panel has the [art number (0-51893) printed on the bottom left corner along with Reliance Electric’s company symbol. The front panel of the 0-51893 is then secured at three points (one near the top and two points at the bottom) onto a large thick metal bracket. The wires from the front panel are also fed through the thick metal bracket. The wires are then connected to a very small circuit board using the metal tabs on the card. The circuit board seems to feature ten tabs for wires though only eight are being used. The circuit board also has a transformer in the center and three large red resistors.

To order your PC field controller contact AX Control today.

","meta_title":"RELIANCE ELECTRIC PC CONTROL BOARD FIELD CONTROLLER","meta_description":"RELIANCE ELECTRIC PC CONTROL BOARD FIELD CONTROLLER","keywords":"RELIANCE ELECTRIC PC CONTROL BOARD FIELD CONTROLLER","series_page_description":"RELIANCE ELECTRIC PC CONTROL BOARD FIELD CONTROLLER","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-15 09:09:49","prod_pdf":[]},{"id":8944,"part_number":"0-51893-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"FCCB Field Control","short_desc":"The 0-51893-1 is a Reliance Field Regulator Controller Board FCCB","content":"

0-51893-1 Field Regulator Controller Board FCCB

The 0-51893-1 is a Reliance Electric PCB (printed circuit board) with faceplate manufactured for use within Reliance drive systems.

The 0-51893-1 functions as a Field Regulator Controller Board. This is a complicated multi-board component. The attached wide faceplate has a bank of screw connections with attached wires running down its center. These have a front cover over their surface connected by two screws. The connections are labeled from top to bottom as 181/null/182/null/1831/471/null/451/null/F1/135/235/null (null being no label at that screw connection.) There is a round opening to the right of the screw bank to allow the wired connections through the faceplate to the surface of the circuit board. The faceplate also has two indicators labeled “Max. Arm. Volts” and “Stab.”

The circuit board components of the 0-51893-1 are mounted facing each other, with all components inward. One board is marked 0-48541-2. This board is populated by a transformer (TR-12143) with multiple surface wires. The board has additional surface wire connections. It has wire wound resistors, carbon composite, and metal film resistors. The board has several transistors. It also has two potentiometers that line up with the indicators on the front faceplate. This is the bottom board. The top board is populated by transistors, surface wiring, polyester vinyl, and aluminum electrolytic capacitors, as well as disk capacitors. This board connects to a metal housing on the end opposite the faceplate, which then connects to a third circuit board with an additional transformer and an auxiliary board that is mounted at a ninety-degree angle. This board has several transistors, capacitors, transistors, and integrated circuits on its surface.

Information regarding the operation and installation of the 0-51893-1 may be found through Reliance publications. Please refer to user guides or manuals for this detailed information.

","meta_title":"FCCB Field Control","meta_description":"FCCB Field Control","keywords":"FCCB Field Control","series_page_description":"FCCB Field Control","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 11:30:18","prod_pdf":[{"id":3058,"product_id":8944,"pdf_id":15649,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15649,"pdf_type_id":1,"file_name":"0-51893-1.pdf","title_tag":"FCCB Field Control","alt_tag":"FCCB Field Control","created_at":null,"updated_at":null}}]},{"id":8945,"part_number":"0-51893-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Field Controller Board","short_desc":"0-51893-2 is a Reliance Field Controller Board","content":"

0-51893-2 Field Controller FCCC

The 0-51893-2 is a Field Controller module manufactured by Reliance Electric for use within the company’s drive systems. This is one of several Field Controllers available within this board series; please verify which version is compatible with your system.

The 0-51893-2 has multiple board components attached to a front faceplate. The faceplate has a twelve-position terminal strip located in its center. This is covered by its own smaller cover attached with a screw to either end of the terminal strip. Wires typically attach to the right side of the terminal strip as they extend through the faceplate from an opening located on the right side of the terminal strip. These wires are typically black or orange with blue or red ends. The faceplate has two openings to access potentiometers located on the circuit board. It also has a set screw at both the top and at the bottom of the panel that locks the component into position within the rack system.

The 0-51893-2 has several board components. This includes a 0-48650-2 board, a 0-48651-2 board, and several smaller auxiliary boards that are mounted to these boards at a ninety-degree angle via pin connections and are supported by metal housings. The boards are populated by transformers, transistors, capacitors of various size and materials, including disk capacitors, resistors (primarily metal film and wire wound) diodes, stab-on connectors, surface wires from larger transformer components to the board surface and surface wires from the board to other components, as well as a conductive backplane. Refer to Reliance publications (manuals or user guides) for more detailed information.

","meta_title":"Field Controller Board","meta_description":"Field Controller Board","keywords":"Field Controller Board","series_page_description":"Field Controller Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 11:39:44","prod_pdf":[{"id":3059,"product_id":8945,"pdf_id":15650,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15650,"pdf_type_id":1,"file_name":"0-51893-2.pdf","title_tag":"Field Controller Board","alt_tag":"Field Controller Board","created_at":null,"updated_at":null}}]},{"id":8946,"part_number":"0-51893-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":4,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Field Control Board","short_desc":"The 0-51893-3 is a FCCD Field Exciter Controller Module from Reliance Electric","content":"

0-51893-3 FCCD Field Exciter Controller Module

The 0-51893-3 is a Field Exciter Controller module manufactured by Reliance Electric for use within their drive systems. There are several versions of the Field Controller available within this series of boards; please verify before ordering which version is needed. Reliance components typically carry the Reliance logo. However, in some cases, these components may be notated as coming from Baldor-Reliance or from ABB. The 51893-3 part number remains the same in each case.

The 0-51893-3 has a single board component but is a multi-case component. The module has a front faceplate that is populated with a terminal strip with twelve screw connections. This strip has its own black perforated cover strip that connects to the faceplate using two screw connections. Wires extend through the faceplate using an opening placed to the right of the terminal strip. Wires are typically black in color. Only four of the screw connections are labeled. Labels include 181, 182, F1 and F2. The faceplate has two set screws to lock the module into a rack system. It also has three tabs with drill holes located on its left edge to allow for alternate mounting.

The faceplate connects to a second metal housing via screw connections and standoffs. There is a large open gap between these two components. An opening in the second housing allows wires to pass through. The board component of the module is screw mounted to the inside of this metal housing. This small square board has several stab-on connectors and four metal oxide varistors (MOVs.) There are no other components. Several of the previously mentioned wires are designed to attach to these stab-on connectors.

For more information about the operation of the 0-51893-3, please consult publications like manuals or user guides originally provided by Reliance Electric.

","meta_title":"PC Field Control Board","meta_description":"PC Field Control Board","keywords":"PC Field Control Board","series_page_description":"PC Field Control Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 12:06:02","prod_pdf":[{"id":3057,"product_id":8946,"pdf_id":15651,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15651,"pdf_type_id":1,"file_name":"0-51893-3.pdf","title_tag":"PC Field Control Board","alt_tag":"PC Field Control Board","created_at":null,"updated_at":null}}]},{"id":8947,"part_number":"0-51893-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Field Controller Card","short_desc":"The 0-51893-4 is a FCCE Field Controller Module from Reliance","content":"

0-51893-4 FCCE Field Controller Module

The 0-51893-4 is a Reliance FCCE Field Controller Module manufactured for use within some of the company’s drive systems. There are several versions of the Field Controller or Field Exciter Controller available within this board series; please refer to your drive’s paperwork to verify which best suits your system’s needs before placing your order.

The 0-51893-4 includes a front faceplate with a rotary dial component located in its top left corner. The faceplate has an opening to allow wires from the circuit boards through to the front of the module. To the left of this, there is a ten-position terminal strip positioned in the center of the panel. Not all terminals are labeled, but those that are, include labels such as 181, 182, F1, F2, 500V, 240V and COM. The terminal strip is covered by a smaller covering that connects with two screws.

The 0-51893-4 has two primary board components with two auxiliary boards connected at ninety-degree angles. The boards also have metal frames connected to their surfaces to add stiffness and structure to the module. These are screw mounted to the surface of the boards. Components found on these boards include capacitors, metal film resistors, stab-on connectors with wired connections using surface wires, transistors, wire wound resistors, disk capacitors, and a large transformer. Some capacitors in need of secondary support are zip-tied to the board. The boards also have several integrated circuits.

For detailed information relating to board installation, or for information about board operation, refer to publications originally provided by Reliance, such as product manuals and user guides.

","meta_title":"Field Controller Card","meta_description":"Field Controller Card","keywords":"Field Controller Card","series_page_description":"Field Controller Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 13:39:43","prod_pdf":[{"id":3055,"product_id":8947,"pdf_id":15652,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15652,"pdf_type_id":1,"file_name":"0-51893-4.pdf","title_tag":"Field Controller Card","alt_tag":"Field Controller Card","created_at":null,"updated_at":null}}]},{"id":8948,"part_number":"0-51893-7","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"FCCA PC Controller","short_desc":"The 0-51893-7 is a Reliance Field Controller Module FCCC","content":"

0-51893-7 Field Regulator Controller FCCC

The 0-51893-7 is a multi-board module component manufactured by Reliance Electric for use within the company’s drive systems.

The 0-51893-7 functions as a Field Regulator Controller Module. The board is fronted by a wide faceplate. The faceplate is a double-wide piece with a twelve-screw terminal strip down its center. This is covered by its own cover with corresponding drill holes. The terminal screws are labeled top to bottom as 181, 182, (none), 235, 57, F2, (none), 500V, 240V, 120V, COM, (none), and (none.) Screw connections connect to various wires that connect to the board. These connect to the board through an opening in the front panel located to the side of the terminal strip. The faceplate also has an opening labeled “Max arm volts” and another labeled “Stab.”

The 0-51893-7 is comprised of multiple boards. This includes the 0-48651-2 board, which is populated by wire-wound and metal film resistors. The board also has transistors, capacitors, and multiple surface wire components, including several that end in stab-on female connectors. It has a large transformer located on its front edge. The board’s surface is printed with a grid pattern. A second board used in this module is a 0-48650-2 board. This board has a metal rack system connected to its rear edge. This is designed to hold ninety-degree auxiliary cards in place. The rear edge of this card has a line of eight stab-on connectors. Additional stab-on connectors are located elsewhere on the board. There are several surface wires with screw connectors at their ends, transistors, capacitors, resistors, and two transformers. More information on the board and its operation may be accessed through Reliance publications like user guides and manuals.

","meta_title":"FCCA PC Controller","meta_description":"FCCA PC Controller","keywords":"FCCA PC Controller","series_page_description":"FCCA PC Controller","quote_description":null,"inventory_notes":"screws missing in front","cross_reference":"","created_at":null,"updated_at":"2019-04-01 13:57:13","prod_pdf":[{"id":3056,"product_id":8948,"pdf_id":15653,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15653,"pdf_type_id":1,"file_name":"0-51893-7.pdf","title_tag":"FCCA PC Controller","alt_tag":"FCCA PC Controller","created_at":null,"updated_at":null}}]},{"id":9139,"part_number":"0-51899-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Extender Card","short_desc":null,"content":"

0-51899-1 Control Module Extender Card

The 0-51899-1 is a Reliance Electric circuit board made to be used within the company’s drive systems. This board may have shipped originally from Baldor-Reliance or from Asea Brown Boveri. The part ID will reflect the 51899-1 number regardless of manufacturer.

The 0-51899-1 is a Control Module Extender Card. This type of card allows testing on another board to occur without the need to remove it from the rack system. This prevents any chance of damage occurring during extraction or re-insertion of these boards. Conductive tabs are located on an extending part of the back edge, which serves as a backplane. The front of the board is designed with two extending arms. The rest of the board consists of conductive traces and pin connectors, with no other components located on the board surface.

For more information regarding all aspects of installation, use, or operation of the 0-51899-1 board, please refer to Reliance publications originally provided for ongoing technical support, such as user guides, product manuals or board data sheets. Safety and handling guidelines are also available within these informational works.

AX Control can provide you with a shipping quote for your order, upon request. We work with several of the world’s largest carriers in order to provide our customers with many different options for shipping, from the quickest next day options to economical ground service.

","meta_title":"PC Board Extender Card","meta_description":"PC Board Extender Card","keywords":"PC Board Extender Card","series_page_description":"PC Board Extender Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-23 08:16:02","prod_pdf":[{"id":3054,"product_id":9139,"pdf_id":15654,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15654,"pdf_type_id":1,"file_name":"0-51899-1.pdf","title_tag":"PC Board Extender Card","alt_tag":"PC Board Extender Card","created_at":null,"updated_at":null}}]},{"id":8949,"part_number":"0-51899-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Drive Card","short_desc":"The 0-51899-2 is an Extender Control Module Test Card from Reliance Electric","content":"

0-51899-2 Extender Control Module Test Card

The 0-51899-2 is a long and narrow board component manufactured by Reliance Electric for use within their various drive systems. This board is typically marked with a Reliance logo but in some cases may be marked with a manufacturer mark from Baldor-Reliance or one from ABB, otherwise known as Asea Brown Boveri.

The 0-51899-2 functions as a Control Module Extender Card. Extender Cards allow access for testing without the need to remove or insert boards; this prevents possible damage during repeated processes. The 0-51899-2 has a connector located on one edge of the board designed from conductive tabs. This connector extends from the board edge like a tab or tail. Each conductive tab on its surface connects to a trace located on the board’s surface. Traces then extend across the board’s surface to brass pins located across approximately two thirds of the board’s length. There are four lines of pins. Each pin is individually numbered from one to forty-four. The line of pins closest to the conductive tail is numbered two through twenty-two (even numbers only.) The second line is numbered one through twenty-one (odd only.) The third line of pins is numbered twenty-four through forty-four (even only.) The last line of pins is numbered twenty-three through forty-three (odd only.) Each pin is connected by a black wire across a rectangular opening in the board to a right-angled multi-pin male connector located on the left edge of the board. This connector is screw mounted to the board’s surface by two brass screws. Each wire connection is numbered one through forty-four. There are no other components on the board surface.

More information on the use of the 0-51899-2 board may be found through Reliance publications like user guides or manuals. Please follow all safety and handling procedures.

","meta_title":"Reliance Drive Card","meta_description":"Reliance Drive Card","keywords":"Reliance Drive Card","series_page_description":"Reliance Drive Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 14:22:15","prod_pdf":[{"id":3151,"product_id":8949,"pdf_id":14273,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14273,"pdf_type_id":1,"file_name":"0-51899-2.pdf","title_tag":"Reliance Drive Card | PDF","alt_tag":"Reliance Drive Card | PDF","created_at":null,"updated_at":null}}]},{"id":9138,"part_number":"0-51899-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Circuit Board","short_desc":null,"content":"

0-51899-3 Reliance Circuit Board

The 0-51899-3 is a Reliance Electric circuit board manufactured for use within Reliance Electric’s various drive systems. It is possible this board was originally shipped under the manufacturer name of Baldor-Reliance or possibly ABB/Asea Brown Boveri. The board ID should always reflect the 51899-3 number.

The 0-51899-3 is a rectangular board with a conductive backplane located on a tab that extends from the board’s back edge. The front board edge attaches to a narrow faceplate with two set screws to lock the module securely into place within a rack system. This faceplate is empty of components except for two female plugs that are mounted into its bottom half. These two plugs wire into the board using multiple surface wires. These are tied together with zip ties.

The 0-51899-3 has a surface that includes integrated circuits, capacitors, resistors, and diodes. Surface wiring is used in multiple locations, as noted above and also to connect board point to board point. For more detailed information, please refer to publications originally provided by Reliance Electric, such as user guides and product manuals.

AX Control is a leading supplier of reconditioned and new surplus industrial automation parts. If you can’t locate what you need within our million-dollar online catalog of offerings, please feel free to reach out to our team; we are happy to search through the newly received inventory to find what you are looking for.

","meta_title":"PC Circuit Board","meta_description":"PC Circuit Board","keywords":"PC Circuit Board","series_page_description":"PC Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-23 07:55:39","prod_pdf":[{"id":3052,"product_id":9138,"pdf_id":15655,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15655,"pdf_type_id":1,"file_name":"0-51899-3.pdf","title_tag":"PC Circuit Board","alt_tag":"PC Circuit Board","created_at":null,"updated_at":null}}]},{"id":8950,"part_number":"0-51901","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board","short_desc":"The 0-51901 is an Armature Regulator Drive Card from Reliance Electric","content":"

0-51901 Armature Regulator Drive Card

The 0-51901 is a board component manufactured by Reliance Electric. This PCB is typically used within Reliance Electric drive systems. In some cases, the 0-51901 may be marked with manufacturer marks from ABB, otherwise known as Asea Brown Boveri, or from Baldor-Reliance. The part will still reflect the 51901 number.

The 0-51901 functions as an Armature Regulator Drive board. Unlike most PCBs in this series, the 0-51901 has a backplane connector along its long edge rather than along its short edge. This connector is designed as an extending stub with multiple conductive tabs along its surface. If this is considered the rear edge of the board, the front edge of the board is populated by two relays and four potentiometers. The potentiometers are labeled 1P through 4P. The relays are labeled 48 VDC and 115 VAC. Each of these relays connects to the board using surface wiring.

Other components on the surface of the 0-51901 include transistors, capacitors, and resistors, as well as diodes. Capacitors are of several materials, including polyester vinyl, ceramic, and aluminum electrolytic. Capacitors tend to be made from carbon composite material, but other types of resistors exist on the board. The board is drilled in several locations. Its surface is marked with a grid pattern. If more detailed information is needed, especially information regarding installation or board operation, please consult publications originally provided by Reliance for the technical support of this product. This includes user guides and manuals. Information regarding proper handling procedures will be available within these publications.

0-51901-A Armature Regulator Drive Board

The 0-51901-A is a PCB board component manufactured by Reliance Electric for use within the company’s various drive systems.

The 0-51901-A is designed to function as an Armature Regulator Drive Card. This circuit board has its backplane connector located along its long edge instead of on its short edge, like most boards in this board series. The backplane is designed from an extending tail that has multiple conductive surfaces placed upon it. With this acting as the back edge of the board, the opposite ‘front’ edge has four potentiometers placed in a metal frame next to two relays. The relays are placed sideways on the board facing toward the front edge. They wire into the circuit board using multiple surface wired connections. The potentiometers are labeled 1P, 2P, 3P, and 4P.

Other components located on the 0-51901-A includes four integrated circuits, transistors, disk capacitors made from ceramic material, polyester vinyl capacitors of various size, aluminum electrolytic capacitors, diodes, and resistors. Most resistors are made from metal film. Some capacitors are large enough to need secondary support; this is typically given by zip ties threaded through the board’s surface.

The 0-51901-A is marked on its rear edge with the codes 4797 and 82746-74C. It is imprinted with the Reliance logo. More information about installation, operation, and maintenance of this component may be found through technical support publications originally provided by the manufacturer, such as user guides and manuals. Reliance Electric provided all support for this product. Please follow all handling and safety procedures as recommended by the manufacturer.

","meta_title":"Drive Controller Regulator Card","meta_description":"Drive Controller Regulator Card","keywords":"Drive Controller Regulator Card","series_page_description":"Drive Controller Regulator Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 15:11:22","prod_pdf":[{"id":3051,"product_id":9140,"pdf_id":15657,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15657,"pdf_type_id":1,"file_name":"0-51901-A.pdf","title_tag":"Drive Controller Regulator Card","alt_tag":"Drive Controller Regulator Card","created_at":null,"updated_at":null}}]},{"id":8951,"part_number":"0-51902","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Driver Card Assembly","short_desc":"The 0-51902 is a Reliance Electric Driver Card","content":"

0-51902 Driver card

The 0-51902 is a PCB board component manufactured by Reliance Electric for use within various drive systems made by the company. In some cases, this component will have the Reliance logo. In others, it may be marked as an ABB (Asea Brown Boveri) or as a Baldor-Reliance product. The part should reflect the 51902 number in all cases.

The 0-51902 functions as a Driver card within the Reliance system. This board is rectangular in shape, with a conductive backplane tab located on one long edge of the board. The opposite front edge is populated by twelve stab-on connectors. These are alternately labeled “red” or “white” and are also labeled with various number/letter combinations, for example, G-152 or K-55.

The 0-51902 has six transformers located in a single line. Each transformer lines up with two carbon composite resistors, a diode, an integrated circuit, a transistor, a disk capacitor, and two polyester vinyl capacitors. The board has additional components, including other resistors, disk capacitors, and diodes that fall outside of this pattern. The board is drilled in several locations and is marked with an open grid pattern across its entire surface. Components are not marked with reference designators, but many are marked with their manufacturer part numbers. More information regarding the board operation, or information about how to install the board within Reliance drives, may be found within various publications like data sheets, series user guides, or manuals. Reliance Electric was responsible for providing all technical support for this product, including written technical support.

","meta_title":"Driver Card Assembly","meta_description":"Driver Card Assembly","keywords":"Driver Card Assembly","series_page_description":"Driver Card Assembly","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 15:32:02","prod_pdf":[{"id":3049,"product_id":8951,"pdf_id":15658,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15658,"pdf_type_id":1,"file_name":"0-51902.pdf","title_tag":"Driver Card Assembly","alt_tag":"Driver Card Assembly","created_at":null,"updated_at":null}}]},{"id":8952,"part_number":"0-51902-5","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Driver Board","short_desc":null,"content":"

0-51902-5 Driver Board

The 0-51902-5 is a PCB component manufactured by Reliance Electric for use within the company’s drive systems. This board is typically marked with the Reliance logo but may have originally shipped from the companies Baldor-Reliance or ABB/Asea Brown Boveri. If you have any questions about the compatibility between your current part and this listing due to differences in the listed manufacturer, please reach out to our staff today.

The 0-51902-5, like many boards in this series, is designed with a printed grid pattern on its front surface. The board does not have any sort of attached faceplate and does not use any kind of extractor clip. It is factory-drilled in two of the four corners to allow for mounting hardware (screws or standoffs) to be added to the board. The rear board edge extends slightly in the center and is covered with a conductive material.

The 0-51902-5 has multiple components. This includes four thyristors, transistors, four integrated circuits, capacitors, diodes, and resistors. Capacitors vary from large electrolytic axial capacitors, to polyester vinyl, to ceramic disk capacitors. The board has eight stab-on connectors located along the front edge. Each of these connectors is labeled as “White” or “Red.”

Manuals, data sheets, and other technical support publications originally provided by Reliance will include more detailed information regarding proper installation techniques and board operation. We suggest reading all handling procedures before unboxing your new part.

AX Control offers competitive prices that rival any in our industry. Our customers can save even more through auxiliary programs such as our surplus purchasing and exchange credit service. Speak to an AX Control team member today for more information.

","meta_title":"PC Driver Board","meta_description":"PC Driver Board","keywords":"PC Driver Board","series_page_description":"PC Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"0-51902-5A","created_at":null,"updated_at":"2019-04-24 08:14:45","prod_pdf":[{"id":3050,"product_id":8952,"pdf_id":15659,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15659,"pdf_type_id":1,"file_name":"0-51902-5.pdf","title_tag":"PC Driver Board","alt_tag":"PC Driver Board","created_at":null,"updated_at":null}}]},{"id":9141,"part_number":"0-51902-5A","revision_type_id":1,"series_id":74,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Driver Board","short_desc":"0-51902-5A is a Reliance Driver board","content":"

0-51902-5A Driver Circuit board

The 0-51902-5A is a Reliance Electric circuit board component. This board is designed for use within Reliance drives. In most cases, it will carry the Reliance logo. However, due to changes in company structure, in rare situations this board may originate from ABB or from Baldor Reliance. The 51902-5A number will still be reflected in the part ID number.

Unlike many boards in this series, the 0-51902-5A does not have a connected front faceplate. The board has a printed grid pattern on its surface, and this is marked on its leading edge with numbers that run from zero to 95 in fives. The other grid axis is denoted by letters. The rear edge of the board extends in a conductive backplane.

The 0-51902-5A is populated by lines of resistors. The board has a single large electrolytic capacitor that has been secondarily supported and connected to the board. The board has additional capacitors made from polyester vinyl and ceramic material. A line of stab-on connectors is placed near the front edge. These are individually labeled. Other components on the board include transistors, integrated circuits, diodes, and four transformer components.

Publications originally provided by Reliance Electric will have more information regarding board operation and proper installation techniques. This includes manuals, data sheets, and series user guides. Please read and follow all handling procedures.

AX Control strives to maintain competitive prices and to also offer our customers opportunities to save even more through auxiliary programs like our exchange credit service and our surplus purchase program. Talk to our team today for more information.

","meta_title":"Reliance Electric Driver Board","meta_description":"Reliance Electric Driver Board","keywords":"Reliance Electric Driver Board","series_page_description":"Reliance Electric Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 11:37:22","prod_pdf":[{"id":3047,"product_id":9141,"pdf_id":15660,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15660,"pdf_type_id":1,"file_name":"0-51902-5A.pdf","title_tag":"Reliance Electric Driver Board","alt_tag":"Reliance Electric Driver Board","created_at":null,"updated_at":null}}]},{"id":17758,"part_number":"0-51903","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC POWER SUPPLY","short_desc":null,"content":"

The 0-51903 is made by Reliance Electric as a Power Supply card. The 0-51903 like many other Reliance Electric circuit board features a grid pattern on the surface labeled with letters on the left edge and numbers across the top. The 0-51903 has ten large black thick film resistors. Each of the thick film resistors is marked on the outside with white letters and numbers to identify those particular resistors abilities. Each resistor is marked differently. The black resistors can be found in the numeric grid lines between zero and fifteen. From numeric grid lines fifteen through twenty-five you’ll find six small polypropylene style capacitors and a large metal encased capacitor. The large metal capacitor and each of the polypropylene capacitors have their abilities written on the outside in black letters and numbers. Between the numeric grid lines twenty-five and thirty, you will find twelve diodes with a circle printed on the circuit board to indicate that is the way the energy flows. There are also two smaller metal encased capacitors with their abilities written in black on the outside. Between grid lines thirty and forty you will find a huge metal encased capacitor, two small metal encased capacitors, and a large polypropylene capacitor, each having their abilities written on them. From grid lines forty to fifty on the lower portion of the 0-51903 there are two more huge metal encased capacitors with their abilities written on them. Finally on the upper portion of the 0-51903 from numeric grid lines forty to sixty-five id a large metal housing with a total of six screws, along with two small green fusible resistors just above the metal housing.

","meta_title":"RELIANCE ELECTRIC POWER SUPPLY","meta_description":"RELIANCE ELECTRIC POWER SUPPLY","keywords":"RELIANCE ELECTRIC POWER SUPPLY","series_page_description":"RELIANCE ELECTRIC POWER SUPPLY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-18 12:24:42","prod_pdf":[]},{"id":10143,"part_number":"0-52002-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance 0-52002-2 Relay Card In Stock Now!","short_desc":null,"content":"

0-52002-2 Relay Card

The 0-52002-2 is a board component from Reliance Electric. Reliance has also produced board components under the manufacturing names of Baldor-Reliance and ABB (Asea Brown Boveri.) If your current 0-52002-2 board is marked as originating from one of these companies instead of Reliance and you have questions about compatibility, please reach out to our team.

The 0-52002-2 is a rectangular circuit board with an attached front faceplate. The faceplate portion of this component is narrow and silver and is marked “Relay” along its top edge. The panel includes two set screws to lock the board securely into place once it has been installed. The front panel also has a six-position terminal strip. This is located along the bottom left edge of the panel. These screw connections individually wire into the board’s surface.

The 0-52002-2 has very few components. The surface is printed with a grid pattern and is marked with the Reliance logo. The rear edge extends in a narrow tab that is covered with a conductive material; this acts as a backplane connector. The rest of the board’s surface is empty with the exception of two relays, a polyester vinyl capacitor, a single axial resistor, and a line of components consisting of four diodes and one carbon composite resistor.

Reliance publications like data sheets, manuals, or user guides will provide more information on operative properties of the 0-52002-2. These publications will also provide detailed instructions regarding installation and maintenance, as well as troubleshooting for common issues.

","meta_title":"Reliance 0-52002-2 Relay Card In Stock Now!","meta_description":"Reliance 0-52002-2 Relay Card In Stock Now!","keywords":"Reliance 0-52002-2 Relay Card In Stock Now!","series_page_description":"Reliance 0-52002-2 Relay Card In Stock Now!","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-24 16:09:00","prod_pdf":[{"id":294,"product_id":10143,"pdf_id":16046,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":16046,"pdf_type_id":1,"file_name":"0-52002-2.pdf","title_tag":"Reliance 0-52002-2 Relay Card In Stock Now! | PDF","alt_tag":"Reliance 0-52002-2 Relay Card In Stock Now! | PDF","created_at":null,"updated_at":null}}]},{"id":17776,"part_number":"0-52012","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":7,"new_stock":7,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE GATE DRIVER MAXPAK","short_desc":null,"content":"

The 0-52012 is a GATE DRIVER MAXPAK manufactured by Reliance Electric. This card is marked zero through ninety (increasing by fives) along the top and marked alphabetically A, C, E, G, J, L, N, Q, S, U, W, Y, and AA on the right edge. The upper left edge has a silver transistor and a black transistor. There are two red base colored resistors with a gold band, a red band, a metallic green band, and a pale blue band. There are four dark brown base colored resistors each with different colored bands. One has silver, orange, black and light brown stripes. One has two red, one light brown, and a silver stripe. One has a silver, a light brown, a light purple and a red stripe. The final one has two red stripes, an orange stripe, and a metallic gold stripe. The 0-52012 has five light blue resistors. The gate driver has five small Zener diodes and three large signal diodes. There is a single integrated circuit and ten golden clips. The 0-52012 card has two green colored capacitors, two yellow polypropylene capacitors, and two small blue square polyester capacitors.

Reach out to AX Control for additional details.

","meta_title":"RELIANCE GATE DRIVER MAXPAK","meta_description":"RELIANCE GATE DRIVER MAXPAK","keywords":"RELIANCE GATE DRIVER MAXPAK","series_page_description":"RELIANCE GATE DRIVER MAXPAK","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-18 12:28:12","prod_pdf":[]},{"id":18498,"part_number":"0-52013-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC REGULATOR VOLTAGE SPEED SUMMING CIRCUIT BOARD","short_desc":null,"content":"

The 0-52013-1 module is a regulator voltage speed summing circuit board that was created and manufactured by Reliance Electric. Even though it is not available in the original manufacturer’s stock any longer, AX Control continues to keep it in stock. To check if this product is available, ask any questions about it, and place an order for it, email or call us today to speak to one of our professional sales representatives.

The 0-52013-1 is a long circuit board with many different electrical parts on it of various different shapes and sizes. There are two long flat resistors that are stacked together. These resistors are rated as having 15 kiloOhms of electrical resistance and 20 Watts of power. You will also be able to easily spot a large cylindrical capacitor in the bottom right hand corner. Scattered throughout the surface of the board, you will see a few much smaller electrical components. These electrical components are mostly resistors and capacitors, although there are also a few diodes located toward the middle part of the board as well. You will also see a few wires that are connected to the two flat resistors that were mentioned earlier. These cords come out of these resistors and connect to the board itself, enabling them to adjust many different rates on the board as needed.

The 0-52013-1 weighs approximately 0.10 lbs. or 0.045 kg. Please be advised that this total does not take into account the packaging materials that AX Control uses to house all of the shipments we send out.

","meta_title":"RELIANCE ELECTRIC REGULATOR VOLTAGE SPEED SUMMING CIRCUIT BOARD","meta_description":"RELIANCE ELECTRIC REGULATOR VOLTAGE SPEED SUMMING CIRCUIT BOARD","keywords":"RELIANCE ELECTRIC REGULATOR VOLTAGE SPEED SUMMING CIRCUIT BOARD","series_page_description":"RELIANCE ELECTRIC REGULATOR VOLTAGE SPEED SUMMING CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-09-17 08:58:58","prod_pdf":[]},{"id":8953,"part_number":"0-52711","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Data Input Card","short_desc":"The 0-52711 is a programmable Data Input Card from Reliance","content":"

0-52711 Reliance Programmable Data Input Card 115 VAC

The 0-52711 is a circuit board component manufactured by Reliance Electric for use within their various drive systems. In some cases, this component may be marked as coming from ABB or from Baldor-Reliance. This relies on the year of the board’s manufacture due to mergers with those companies. The part number will still include 52711.

The 0-52711 functions as a Programmable Data Input Card. Unlike most cards in this series, it is not rectangular; rather, it is shaped like a rectangle with one long corner cut off. This edge is populated by a black vertical component that houses two disk capacitors and four bipolar transistors. The board is cut through its surface above this black component in an extended oval to create a sort of handle at the top of the board.

The 0-52711 is marked on its surface by an open grid pattern. This is marked by letters along one axis and by numbers along the other. Numbers repeat about halfway down the board. Board components include one integrated circuit, twelve carbon composite resistors, eight diodes, and capacitors made from aluminum electrolytic material and ceramic material. This includes two disk capacitors. The board has several instances of surface wiring. The integrated circuits is a high-performance analog bus driver.

The 0-52711 is marked on its back surface with codes like 800792-89A and 497. The board is marked along its front edge with its product number and the notation of “115VAC.” The board is drilled in two locations. More information regarding the operation or installation of the board may be found through Reliance publications like data sheets, manuals, or user guides.

","meta_title":"Data Input Card","meta_description":"Data Input Card","keywords":"Data Input Card","series_page_description":"Data Input Card","quote_description":null,"inventory_notes":"one has factory box","cross_reference":"","created_at":null,"updated_at":"2019-04-03 11:29:29","prod_pdf":[{"id":3150,"product_id":8953,"pdf_id":14277,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14277,"pdf_type_id":1,"file_name":"0-52711.pdf","title_tag":"Data Input Card | PDF","alt_tag":"Data Input Card | PDF","created_at":null,"updated_at":null}}]},{"id":9146,"part_number":"0-52711-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"24V Input Data Board","short_desc":"Reliance 0-52711-1 24V Input Data Board","content":"

0-52711-1 24V Input Data Board

The 0-52711-1 is a five-sided board component fabricated by Reliance Electric. This board functions as a 24V Input Data Board. While typically marked with a Reliance logo, this board may sometimes originate from either ABB (Asea Brown Boveri) or possibly from Baldor-Reliance. The 52711-1 number will always be in the part id.

The 0-52711-1 is designed with an input component placed parallel to its front and diagonal sides. This component includes several screw terminals, two LEDs, and the label of “input.” Behind this component, the component is marked “Com” and “24 V.” The surface of the board is has a grid with an axis marked by letters and another marked by numbers.

Other parts included on the 0-52711 include both metal film and carbon composite resistors, disk capacitors, other ceramic capacitors, surface wiring, and integrated circuits. The rear edge is populated by six clips that fit under a second black housing. The board is factory drilled at several points along its edges and is marked with several codes on its front and rear surfaces.

Reliance tech support publications such as manuals, user guides, and product data sheets will provide more information on the installation, operation, and maintenance of the 0-52711. Reliance provided all original technical support for this series of products.

AX Control offers a wide variety of industrial automation parts from manufacturers like Fuji, General Electric, Parker, Horner, and Eurotherm. If you can’t find what you need on our product pages, please contact us directly; we will check our inventory for you!

","meta_title":"24V Input Data Board","meta_description":"24V Input Data Board","keywords":"24V Input Data Board","series_page_description":"24V Input Data Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 13:22:17","prod_pdf":[{"id":3048,"product_id":9146,"pdf_id":15661,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15661,"pdf_type_id":1,"file_name":"0-52711-1.pdf","title_tag":"24V Input Data Board","alt_tag":"24V Input Data Board","created_at":null,"updated_at":null}}]},{"id":9145,"part_number":"0-52711-10","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"64-Bit Input Card","short_desc":"The 0-52711-10 is a 64-Bit Input Card from Reliance","content":"

0-52711-10 64-Bit Data Input Card

The 0-52711-10 from Reliance is designed to function as a 64-bit Data Input Board. This circuit board is typically used in Reliance drives. In some cases, the 0-52711-10 may come from Asea Brown Boveri instead of Reliance, or possibly from Baldor-Reliance. The 52711-10 number will still be reflected in the part id.

The 0-52711-10 does not have an attached faceplate or any type of extractor clip. It is a five-sided board with a narrower front edge as compared to its back edge, and a shorter left edge when compared to the right. There is an oval cutout directly below the top board edge, which thus creates a handle-like extrusion to the board. Underneath this cutout, there is a warning label stating “Card requires setup before installing. Consult EM.” Reliance product manuals will have more information.

The 0-52711-10 has two lines of four toggle switch components. Each of these components has eight toggles on the top of the component that can be set to either ‘off’ or ‘on.’ The board has one additional toggle switch that is located along the board’s diagonal edge between the front and left edges. Other components on the front surface include four lines of four resistor network arrays (sixteen in all,) ten integrated circuits and several lines of carbon composite resistors. The board also has ceramic capacitors and surface wiring.

Reliance publications like manuals, user guides, and data sheets will provide the user with more information regarding board operation, installation, and maintenance. As the original equipment manufacturer, Reliance Electric provided all technical support for the 0-52711-10. This is a static-sensitive board, which will ship from AX Control protected by an anti-static bag or wrap.

","meta_title":"64-Bit Input Card ","meta_description":"64-Bit Input Card ","keywords":"64-Bit Input Card ","series_page_description":"64-Bit Input Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 12:58:18","prod_pdf":[{"id":3045,"product_id":9145,"pdf_id":15662,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15662,"pdf_type_id":1,"file_name":"0-52711-10.pdf","title_tag":"64-Bit Input Card","alt_tag":"64-Bit Input Card","created_at":null,"updated_at":null}}]},{"id":9143,"part_number":"0-52711-11","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"64-Bit Input Card for AutoMate","short_desc":"0-52711-11 Input Card 64 Bit Data IP from Reliance","content":"

0-52711-11 Input Card 64 Bit Data IP

The Reliance 0-52711-11 circuit board functions as a 64 Bit Data IP input Card. This board is designed for use within Reliance drives. Typically, this component is labeled with a Reliance logo. However, in some cases, this component may originate from ABB or Baldor-Reliance. The 52711-11 number will be reflected in the part identification number.

The 0-52711-11 is a five-sides board with a very short leading edge. Unlike most boards in this series, is built without an attached faceplate. Instead, the front edge is designed with an oval cutout that is shaped like an extruding handle. Underneath this cutout, the board has a single warning label that states “Card requires internal set-up before installing. Consult E/M.” Please refer to the product manual for more information.

The 0-52711-11 is populated by eight toggle switch components. These are placed on the board in two lines of four. Each toggle switch component has eight individual toggles on its top surface. The toggles are individually numbered and can be set to an ‘on’ or ‘off’ position. The board has one push button switch located on its leading edge. Other components include sixteen resistor network arrays, eleven integrated circuits, carbon composite resistors, transistors, capacitors, and surface wires. The board has a single component marked G00756-6A mounted along its rear edge using three screw connections.

Installation and maintenance information for the 0-52711-11 may be found by using Reliance publications like user guides. These publications will also provide pertinent handling and safety procedures.

","meta_title":"64-Bit Input Card for AutoMate","meta_description":"64-Bit Input Card for AutoMate","keywords":"64-Bit Input Card for AutoMate","series_page_description":"64-Bit Input Card for AutoMate","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 13:21:14","prod_pdf":[{"id":3046,"product_id":9143,"pdf_id":15663,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15663,"pdf_type_id":1,"file_name":"0-52711-11.pdf","title_tag":"64-Bit Input Card for AutoMate","alt_tag":"64-Bit Input Card for AutoMate","created_at":null,"updated_at":null}}]},{"id":9148,"part_number":"0-52711-13","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":21,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"AutoMate Dual Input Board","short_desc":"AutoMate Dual Input Board from Reliance Electric","content":"

0-52711-13 AutoMate Dual Input Board 115VAC

The 0-52711-13 is a Reliance Electric circuit board that has been discontinued by the manufacturer. This is sometimes listed as a Baldor Reliance or Asea Brown Boveri part. The 0-52711-13 functions as an Input Module Card (115 VAC) and is designed for use in Reliance systems.

The 0-52711-13 is a five-sided card with a longer back edge as compared to its truncated front edge, and a longer right edge as compared to its left. There is a large oval cut from the card just below the front edge, making a sort of handle. The board’s input component, which is a black casing with screw terminals and two LED indicators, is mounted to the board directly below this opening. The input component is parallel to the top and diagonal side edge of the board.

The top surface of the 0-52711-13 is printed overall with a grid pattern. This is marked by letters and numbers. The surface of the card is factory drilled in several locations, including one location within the body of the board that is labeled “COM” and another labeled “115V.” Other components include capacitors that use various materials including electrolytic and ceramic, diodes, integrated circuits, metal film resistors, and carbon composite resistors. The board has surface wired points in several places. There is a second black housing located along the back board edge; this is mounted to the board’s surface using three screws threaded from the bottom of the board.

More information regarding such things as the board’s operation, installation, or handling can be found through Reliance publications like manuals and user guides.

","meta_title":"AutoMate Dual Input Board","meta_description":"AutoMate Dual Input Board","keywords":"AutoMate Dual Input Board","series_page_description":"AutoMate Dual Input Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 13:43:02","prod_pdf":[{"id":3042,"product_id":9148,"pdf_id":15664,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15664,"pdf_type_id":1,"file_name":"0-52711-13.pdf","title_tag":"AutoMate Dual Input Board","alt_tag":"AutoMate Dual Input Board","created_at":null,"updated_at":null}}]},{"id":8954,"part_number":"0-52711-15","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Automate 24V Input Card","short_desc":"The 0-52711-15 is a 24V Data Input Card from Reliance","content":"

0-52711-15 24V Data Input Card

The 0-52711-15 is a board component made and released by Reliance to fit into their drive systems. Your board may be marked with the Reliance logo, or in some cases, it may be marked with the logo of Baldor-Reliance. More rarely, it could be marked as being produced by ABB/Asea Brown Boveri. In all cases, the board will reflect the 52711-15 part number. Changes in manufacturer occur due to changes in company structure only.

The 0-52711-15 functions as a Data Input board. Unlike typical board components in this series that has some sort of rectangular shape, the 0-52711-15 is a modified rectangle that has had one long corner cut off at an angle. The opposite corner of this side is cut out with an extended oval. This side of the board is populated by a large black board connector (input) that extends over the board edge.

Other components located on the surface of the 0-52711-15 include a high-performance analog bus driver integrated circuit (the only IC on the board’s surface,) twelve resistors made from carbon composite material, eight diodes, surface wiring, and capacitors made from ceramic material and aluminum electrolytic material. Ceramic capacitors include disk capacitors.

The surface of the 0-52711-15 is marked with a grid pattern. Components typically do not carry reference designators, but some components are marked with their manufacturer part numbers. Reliance Electric data sheets, user guides, and manuals will provide more information regarding the operation, installation, and proper handling of this board component. Please read and follow all safety precautions.

","meta_title":"Automate 24V Input Card","meta_description":"Automate 24V Input Card","keywords":"Automate 24V Input Card","series_page_description":"Automate 24V Input Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 11:56:17","prod_pdf":[{"id":3149,"product_id":8954,"pdf_id":14278,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14278,"pdf_type_id":1,"file_name":"0-52711-15.pdf","title_tag":"Automate 24V Input Card | PDF","alt_tag":"Automate 24V Input Card | PDF","created_at":null,"updated_at":null}}]},{"id":9144,"part_number":"0-52711-2","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Dual Input 24VDC Card","short_desc":"Dual Input 24VDC Card from Reliance","content":"

0-52711-2 Automate Input Card 24 VDC

The 0-52711-2 is an Input Card (24 VDC) from Reliance Electric. This is typically used within Automate systems. While the 0-52711-2 usually has a Reliance logo on its edge, in some cases, it may be stated as being a Baldor-Reliance component or, more rarely, coming from Asea Brown Boveri. The 52711-2 id will remain in the part number in all cases.

The 0-52711-2 includes a connector on its top edge. This is used for connection to I/O ports. It has three screw-type terminal points located along its side. The faceplate also has two LEDs, a fuse holder, and a fuse, along with a mode switch.

The 0-52711-2 is a five-sided board with only a few components on its surface. This includes integrated circuits, diodes, and carbon composite resistors. Surface wiring is used on this board. The board is printed with a grid pattern with one axis designated by letters and the other by numbers. The rear board edge is populated by another connector that is connected to the board using three screws threaded from the bottom of the board.

More information regarding the 0-52711-2 may be found through Reliance publications like data sheets and manuals. Please follow all manufacturer suggestions regarding handling and safety procedures. Only qualified technicians should maintain or install this equipment.

Our multi-million dollar inventor of industrial automation parts includes products from Eurotherm, GE, Fuji, Parker, and Horner. If you need a particular part and don’t see it listed, please contact us directly; we’ll be happy to check our inventory for you!

","meta_title":"Dual Input 24VDC Card","meta_description":"Dual Input 24VDC Card","keywords":"Dual Input 24VDC Card","series_page_description":"Dual Input 24VDC Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 11:36:36","prod_pdf":[{"id":3043,"product_id":9144,"pdf_id":15665,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15665,"pdf_type_id":1,"file_name":"0-52711-2.pdf","title_tag":"Dual Input 24VDC Card","alt_tag":"Dual Input 24VDC Card","created_at":null,"updated_at":null}}]},{"id":9142,"part_number":"0-52711-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Dual Input PC Board","short_desc":"0-52711-3 Dual I/P Input Card AC/DC from Reliance","content":"

0-52711-3 230V Dual I/P BLOK Input Card AC/DC

The 0-52711-3 is a non-rectangular Reliance Electric circuit board. This board is designed to be used within Reliance drive systems.

The 0-52711-3 is a five-sided card. The board is essentially a rectangle with one corner ‘clipped’ off at an angle. This corner is populated by a large component that is labeled “ 230V AC/DC Input.” The component has four screw mounts that each step down to match the angle of the card. The component also has two LED indicators mounted into its surface. The top edge of the board, which is shorter than any other board edge, has a large oval cut from its surface.

The 0-52711-3 is printed in a grid pattern. It is populated by twelve carbon composite resistors of various sizes. IT has eight diodes, four capacitors including two ceramic disk capacitors, three integrated circuits, and several instances of surface wiring. ICs include a high-performance analog bus driver. The rear edge of the board is populated by another larger black component that is marked 800/56-6A. The board is drilled in several locations. The back surface of the 0-52711-3 is marked with the code 800792-95A.

Reliance user guides and manuals will provide more information on the 0-52711-3. These publications will have detailed information regarding the installation and maintenance of this board. Only well-trained, qualified personnel should install or maintain this equipment.

AX Control maintains a multi-million dollar inventory of industrial automation parts, including parts from GE, Fuji, Eurotherm, and Parker Electric. If you don’t see what you need on our website, please ask--we’ll be happy to check our inventory for you!

","meta_title":"Dual Input PC Board","meta_description":"Dual Input PC Board","keywords":"Dual Input PC Board","series_page_description":"Dual Input PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 11:55:47","prod_pdf":[{"id":3044,"product_id":9142,"pdf_id":15666,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15666,"pdf_type_id":1,"file_name":"0-52711-3.pdf","title_tag":"Dual Input PC Board","alt_tag":"Dual Input PC Board","created_at":null,"updated_at":null}}]},{"id":9151,"part_number":"0-52711-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"24VAC/DC Dual Input Card","short_desc":"24 VAC/DC Dual Input Card from Reliance Electric","content":"

0-52711-4 24 VAC/DC Dual-Input Card

The 0-52711-4 is a Reliance Electric 24 VAC/DC Dual-Input Card. This board component is sometimes marked as originating from Baldor Reliance. It may also be marked as an Asea Brown Boveri/ABB component. Regardless of manufacturer, the 52711-4 number will remain in the part ID.

The 0-52711-4 has five sides on the circuit board. This includes a shorter front and left side that is connected by a diagonal extra edge. The board has a cut out in the shape of an oval on its surface below the short front edge, which gives this part of the 0-52711-4 the look of a handle. The input component is placed on the board directly below this cutout and parallels its bottom edge and the diagonal side. The input has two LED indicators mounted in its front. It has several screw connections along the diagonal side. A second housing is connected to the board by three screws. This housing is located on the rear board edge.

The 0-52711-4 has very few components on its surface. It has three integrated circuits, two ceramic disk capacitors, several instances of surface wiring, eight diodes, and six pairs of carbon composite resistors. There are also two additional capacitors on the board. The board’s surface had a grid pattern that is marked from top to bottom with lettering and left to right with numbering. More information on the board and its components can be found through Reliance publications, like user guides and data sheets.

Please refer to product manuals from Reliance for detailed information on operation and installation for the 0-52711-4. Reliance provided all original technical support for this part.

","meta_title":"24VAC/DC Dual Input Card","meta_description":"24VAC/DC Dual Input Card","keywords":"24VAC/DC Dual Input Card","series_page_description":"24VAC/DC Dual Input Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 14:43:05","prod_pdf":[{"id":3041,"product_id":9151,"pdf_id":15667,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15667,"pdf_type_id":1,"file_name":"0-52711-4.pdf","title_tag":"24VAC/DC Dual Input Card","alt_tag":"24VAC/DC Dual Input Card","created_at":null,"updated_at":null}}]},{"id":9149,"part_number":"0-52711-5","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"48VAC Dual Input Card","short_desc":"0-52711-5 48 VAC Dual Input Card from Reliance Electric","content":"

0-52711-5 48 VAC Dual-Input Card

The 0-52711-5 is a Reliance Electric board component manufactured for use within the company’s drives. This card functions as a 48 VAC Dual-Input Card. In the majority of cases, it will carry a Reliance logo. However, some 0-52711-5 are marked as originating from Asea Brown Boveri or from Baldor-Reliance. The part number is the same.

The 0-52711-5 is designed with five sides on the board. It does not have an attached faceplate or any kind of extraction clip. The back and right edges are longer than the front and left edges. A fifth edge connects the top and left edges. The board has an oval cutout located below the leading board edge; this creates a sort of handle just above the board’s input component. This component is created from a black housing with several screw inputs. It also has two LED indicators located on one edge. The component parallels both the top and diagonal board edges.

The 0-52711-5 is printed with a grid pattern that runs from top to bottom and left to right. The left to right axis is marked by letters, while the top to bottom axis is denoted by numbers. Board components include capacitors made from ceramic material, including disk capacitors, other capacitors, diodes, carbon composite resistors, integrated circuits, and surface wiring. The board is drilled in several places along its edges.

Reliance publications (manuals/data sheets/user guides) will provide the user with more information regarding the operation and maintenance of the 0-52711-5. These publications will also provide detailed information on how to properly install the board.

","meta_title":"48VAC Dual Input Card","meta_description":"48VAC Dual Input Card","keywords":"48VAC Dual Input Card","series_page_description":"48VAC Dual Input Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 14:03:10","prod_pdf":[{"id":3040,"product_id":9149,"pdf_id":15668,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15668,"pdf_type_id":1,"file_name":"0-52711-5.pdf","title_tag":"48VAC Dual Input Card","alt_tag":"48VAC Dual Input Card","created_at":null,"updated_at":null}}]},{"id":9147,"part_number":"0-52711-8","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Frequency Input Card","short_desc":"0-52711-8 Reliance Frequency Input Card","content":"

0-52711-8 Frequency Input Card

The 0-52711-8 is a Frequency Input Card fabricated by Reliance Electric. There are two circuit boards in this component, connected together by screw connections and standoffs. These boards are usually marked with the Reliance Electric logo, but may also originate from ABB or from Baldor Reliance.

The 0-52711-8 functions as a Frequency Input Card. The lower board includes multiple integrated circuits, transistors, a rectifier diode, surface wiring, metal film resistors, and ceramic capacitors. The board has several vertical pin components to allow for the connection of surface wires. The front edge of the board has an oval cut-out. Both the front and back edge of the board is populated by large black components that are screw mounted to the surface of the board. The component closest to the front edge is labeled “input” and includes several screw mounts.

The top board of the 0-52711-8 is similar to the bottom board. It has an input component with screw mounts located along its front edge, and it also has several vertical pins to connect to surface wiring. The top board has thirteen integrated circuits, two transistors, several metal film resistors, a capacitor, and several diodes. Both boards are printed in a grid pattern.

More information regarding the operation of this component may be found through Reliance publications. Please follow all manufacturer recommended safety procedures.

The team at AX Control wants to exceed your expectations, not just meet them. If you have any questions about our products or services, please don’t hesitate to contact us. We are here to help!

","meta_title":"Frequency Input Card","meta_description":"Frequency Input Card","keywords":"Frequency Input Card","series_page_description":"Frequency Input Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 13:44:16","prod_pdf":[{"id":3039,"product_id":9147,"pdf_id":15669,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15669,"pdf_type_id":1,"file_name":"0-52711-8.pdf","title_tag":"Frequency Input Card","alt_tag":"Frequency Input Card","created_at":null,"updated_at":null}}]},{"id":9150,"part_number":"0-52711-9","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"24VDC Frequency Input Card","short_desc":"Frequency Input Module 24 VDC from Reliance Electric","content":"

0-52711-9 Frequency Input Module 24 VDC

The 0-52711-9 is a Reliance Electric circuit board that is most often used within Reliance drive systems. Typically marked with a Reliance logo, this board sometimes originates from Asea Brown Boveri instead of Reliance. It may also come from Baldor-Reliance. In all cases, the part number still includes 52711-9.

The 0-52711-9 functions as a Frequency Input Module. There are several similar cards within this series of boards. This is a five-sided circuit board with a wider back edge as compared to its front and a longer right edge as compared to its left. The top of the card has been cut away in an oval shape, leaving a handle-like extrusion above the topmost component. This component is the board’s input module. This housing is connected to the card at multiple points and includes several screw mount connections, along with two LED indicators mounted into its front facing. This component typically has a warning label printed on its top surface. Another housing is located along the rear edge of the board. This housing connects using three screws mounted from the underside of the circuit board.

The 0-52711-9 has several other board components, including a toggle switch with eight individual toggles on its top surface. It has several integrated circuits, carbon composite resistors, disk capacitors, capacitors made of other material, and diodes.

Please refer to Reliance publications (manuals and data sheets) for more information about the operation and handling of the 0-52711-9. These publications will also have detailed information about how to properly install this circuit board. Reliance Electric provided all technical support for the 0-52711-9.

","meta_title":"24VDC Frequency Input Card","meta_description":"24VDC Frequency Input Card","keywords":"24VDC Frequency Input Card","series_page_description":"24VDC Frequency Input Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 14:18:12","prod_pdf":[{"id":3038,"product_id":9150,"pdf_id":15670,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15670,"pdf_type_id":1,"file_name":"0-52711-9.pdf","title_tag":"24VDC Frequency Input Card","alt_tag":"24VDC Frequency Input Card","created_at":null,"updated_at":null}}]},{"id":8955,"part_number":"0-52712","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"52712 052712 Input Board","short_desc":"The 0-52712 is an Input/Output Board from Reliance","content":"

0-52712 Input/Output Board

The 0-52712 is a PCB component made by Reliance Electric. This board is primarily used within Reliance drives. Unlike many boards in this series, the 0-52712 does not have a front faceplate attached to its surface.

The 0-52712 is an Input/Output board. It is not a rectangular board. Instead, the board has a basic rectangular shape, but one edge has been ‘clipped’ off at an angle to leave the board with a short leading edge. This edge has an oval cutout located just inside of it, which then fashions a sort of handle at this point of the PCB.

The 0-52712 is printed with a grid on its front surface. It has three large components from front to back that cover other components on the board. The frontmost of these is labeled Output. This component has two disk capacitors mounted on its front plane. The next of the large components is marked 405971-28A. It is connected to the board with four screws. The last of these components is connected to the rear edge by three screw connections. It covers terminal strip connections.

Other components on the 0-52712 include MOVs (metal oxide varistors) disk capacitors, carbon composite resistors, diodes, polyester vinyl capacitors, other types of capacitors, transistors, metal film resistors, surface wiring, and several integrated circuits.

More information about the operation or installation of this board may be found through publications from Reliance. This includes user guides, product manuals, and data sheets. For your own protection, please read and follow all safety/handling procedures as recommended by the manufacturer.

","meta_title":"52712 052712 Input Board","meta_description":"52712 052712 Input Board","keywords":"52712 052712 Input Board","series_page_description":"52712 052712 Input Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 11:00:09","prod_pdf":[{"id":3148,"product_id":8955,"pdf_id":14279,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14279,"pdf_type_id":1,"file_name":"0-52712.pdf","title_tag":"52712 052712 Input Board | PDF","alt_tag":"52712 052712 Input Board | PDF","created_at":null,"updated_at":null}}]},{"id":9154,"part_number":"0-52712-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Output Board","short_desc":"0-52712-1 Reliance Electric Output Board","content":"

0-52712-1 Reliance Electric Output Board

The 0-52712-1 is a Reliance Electric Output Board. This part is sometimes listed as coming from Baldor-Reliance or sometimes from ABB/Asea Brown Boveri. The 52711-8 part number remains the same regardless of manufacturer. The 0-52712-1 is designed to be used within Reliance drives.

The 0-52712-1 functions as an Output Board. Unlike many boards in this series, the 0-52712-1 does not have an attached front faceplate. Instead, the 0-52712-1 has a narrow front edge that extends from the board and has an oval cutout so it looks and acts like a handle. The board has five sides. It is essentially a rectangle with one edge cut away. This board edge is populated by a large black component that functions as the board’s output component. On the board behind this component, the board has four drill holes, two labeled Line and two labeled Com.

Other components located on the surface of the 0-52712-1 include four integrated circuits, fourteen carbon composite resistors, three diodes, six transistors, surface wires, two ceramic disk capacitors, and other resistors. The board is marked with a grid pattern that covers the entire surface of the board. This is marked zero to 35 in one direction and A through BN in the other. The board is factory drilled to allow for mounting in two corners.

More information regarding the operation of this component may be found through Reliance publications. User guides and manuals will offer more detailed information and instructions on installation and maintenance. Please read and follow handling procedures.

","meta_title":"Reliance Electric Output Board","meta_description":"Reliance Electric Output Board","keywords":"Reliance Electric Output Board","series_page_description":"Reliance Electric Output Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 14:02:19","prod_pdf":[{"id":3037,"product_id":9154,"pdf_id":15671,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15671,"pdf_type_id":1,"file_name":"0-52712-1.pdf","title_tag":"Reliance Electric Output Board","alt_tag":"Reliance Electric Output Board","created_at":null,"updated_at":null}}]},{"id":9158,"part_number":"0-52712-10","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Output Board","short_desc":null,"content":"

0-52712-10 Contact Output Board

The 0-52712-10 is a Contact Output board from Reliance Electric. The board is typically used in Reliance drive systems. This board was sometimes shipped under the manufacturer names of ABB/Asea Brown Boveri or Baldor Reliance. The 52712-10 number is constant within the part ID. This board is no longer actively manufactured.

Unlike many boards in this series, the 0-52712-10 has no connected faceplate or any type of extractor clip attached to its front edge. This is a five-sided board with a more narrow front edge as compared to its rear edge. The front edge of the board has a large oval cut out of its surface, creating a sort of handle.

The surface of the 0-52712-10 includes two housings lined up along its rear edge, both connected to the board’s surface by three screws. The board also has integrated circuits, carbon composite resistors, and diodes. It uses surface wiring in several locations across the board’s surface. The board is marked with a grid pattern that is designated along one axis by numbers and along the other by letters.

For more information on the 0-52712-10, please refer to technical support publications originally provided by Reliance. These include board data sheets, product manuals, and pertinent drive user guides.

AX Control carefully boxes every order that leaves our warehouse. As a static-sensitive component, the 0-52712-10 will also be wrapped in an anti-static sleeve to protect it during transit. Our team is happy to provide you with a shipping quote from our North Carolina warehouse to your location, upon request.

","meta_title":"Reliance Electric Output Board","meta_description":"Reliance Electric Output Board","keywords":"Reliance Electric Output Board","series_page_description":"Reliance Electric Output Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-23 08:24:47","prod_pdf":[{"id":3036,"product_id":9158,"pdf_id":15672,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15672,"pdf_type_id":1,"file_name":"0-52712-10.pdf","title_tag":"Reliance Electric Output Board","alt_tag":"Reliance Electric Output Board","created_at":null,"updated_at":null}}]},{"id":9153,"part_number":"0-52712-11","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"High Power Output Contact Board","short_desc":"High Power Output Contact Board from Reliance Electric","content":"

0-52712-11 High Power Output Contact Board

The 0-52712-11 is a High Power Output Contact Board from Reliance Electric. It is designed for use within Reliance drive systems. In some cases, the 0-52712-11 may be noted as being manufactured by ABB//Asea Brown Boveri, or possibly by Baldor Reliance. The 52712-11 number will always remain within the part id. This circuit board has been discontinued.

The 0-52712-11 is a five-sided board designed without a faceplate and without any type of extractor clip. Instead, the board has an extruding narrow front edge with an oval cutout in the board’s surface that gives the appearance of a handle. The board’s largest component is lined up with this edge and the diagonal edge connecting the shorter front and shorter left edges. The large input/output component includes two LED indicators and several terminal screw connections.

The body of the 0-52712-11 includes components like integrated circuits, transistors, surface wiring, resistors, stab-on connectors, and capacitors. A second housing is located along its rear edge, connected to the board by three screws. Directly behind the large front housing, the board has two Potter and Brumfield military relays. These are marked R40-E0166-2. These are electro-mechanical relays.

For more detailed information, please refer to publications from Reliance Electric, including their data sheets, manuals, and series user guides. These publications will have information regarding the installation, maintenance, and operation of the 0-52712-11.

AX Control maintains a multi-million dollar inventory of various industrial automation parts from manufacturers like GE, Fuji, Woodward, and Cognex Vision. If you can’t find what you need through our online tool, please contact our team directly; we’ll be happy to search our inventory for you.

","meta_title":"High Power Output Contact Board","meta_description":"High Power Output Contact Board","keywords":"High Power Output Contact Board","series_page_description":"High Power Output Contact Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 08:44:10","prod_pdf":[{"id":3034,"product_id":9153,"pdf_id":15673,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15673,"pdf_type_id":1,"file_name":"0-52712-11.pdf","title_tag":"High Power Output Contact Board","alt_tag":"High Power Output Contact Board","created_at":null,"updated_at":null}}]},{"id":9160,"part_number":"0-52712-13","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"AutoMate Output Card","short_desc":"","content":null,"meta_title":"AutoMate Output Card","meta_description":"AutoMate Output Card","keywords":"AutoMate Output Card","series_page_description":"AutoMate Output Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3035,"product_id":9160,"pdf_id":15674,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15674,"pdf_type_id":1,"file_name":"0-52712-13.pdf","title_tag":"AutoMate Output Card","alt_tag":"AutoMate Output Card","created_at":null,"updated_at":null}}]},{"id":9156,"part_number":"0-52712-2","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"230VAC Dual Output Card","short_desc":"230 VAC Dual Output Card from Reliance","content":"

0-52712-2 Dual Output Card 230 VAC

The 0-52712-2 is a Dual Output Card from Reliance Electric. This circuit board is designed to be used within various Reliance drives. It may be marked as a Baldor Reliance board or, in some rare cases, as originating from Asea Brown Boveri. The part number will always reflect “52712-2” somewhere.

The 0-52712-2 does not have any sort of faceplate and is not fitted with extractor clips, like many boards in this series. Instead, it has a shorter leading edge (as compared to its rear edge) that also has a large cutout placed within the body of the board directly below its edge. This gives the appearance of an extruding handle. A grid pattern is printed on the board beginning below this cutout, and the first component is placed along the first line of the grid. This component is an output housing designed with several terminal screw connections and two LED indicators. This component parallels the front and diagonal edges of the board.

Other components on the surface of the 0-52712-2 include MOVs, otherwise known as metal oxide varistors, disk capacitors and other capacitors, surface wiring, transistors, resistors, and diodes. The board has a line of metal clips along its back edge. It also has a large metal plate that is mounted with four screws to the center of the board. This plate covers several other board components.

Detailed information about the installation and operation of 0-52712-2 may be found through Reliance publications like series user guides and product manuals. Please read and follow all handling and safety procedures before unboxing this part.

","meta_title":"230VAC Dual Output Card","meta_description":"230VAC Dual Output Card","keywords":"230VAC Dual Output Card","series_page_description":"230VAC Dual Output Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 09:06:35","prod_pdf":[{"id":3033,"product_id":9156,"pdf_id":15675,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15675,"pdf_type_id":1,"file_name":"0-52712-2.pdf","title_tag":"230VAC Dual Output Card","alt_tag":"230VAC Dual Output Card","created_at":null,"updated_at":null}}]},{"id":9155,"part_number":"0-52712-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Dual Output Module Board","short_desc":"The 0-52712-3 is a Dual Output Module from Reliance","content":"

0-52712-3 Dual Output Module 24 VDC

The 0-52712-3 is designed as a Reliance Electric Dual Output Board. While this is a Reliance part, the board sometimes is listed as originating from ABB/Asea Brown Boveri or from Baldor-Reliance. The 52712-3 number will be reflected in the part number regardless of the manufacturer. This component is designed for use within Reliance drives.

The 0-52712-3 does not have a front faceplate like many of the boards in this series. Instead, it is a five-sided board with overall rectangular shape, but with the left front corner ‘clipped’ off. This corner follows the lines of the output module that is placed along the front board edge. This module is populated by several screw connections. The rear edge of the board is populated by a similar component; this component is marked 800756-6A and is connected to the board using three screws.

Other board components populating the 0-52712-3 include two MOVs (metal oxide varistors,) several disk capacitors, transistors, integrated circuits, surface wiring from board point to board point, and resistors made from metal film and from carbon composite. The board has a single large metal panel mounted parallel to the center of the board using two screw mounts threaded from the bottom of the board. The board’s surface is printed with a grid.

More information about this board can be found through Reliance publications like data sheets, manuals, and user guides. Please follow the recommended installation procedures as written in these publications.

The team at AX Control is here to help. If you have questions about anything, from the availability of a product to information regarding a previous purchase, please contact us!

","meta_title":"Dual Output Module Board","meta_description":"Dual Output Module Board","keywords":"Dual Output Module Board","series_page_description":"Dual Output Module Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-05 14:23:06","prod_pdf":[{"id":3032,"product_id":9155,"pdf_id":15676,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15676,"pdf_type_id":1,"file_name":"0-52712-3.pdf","title_tag":"Dual Output Module Board","alt_tag":"Dual Output Module Board","created_at":null,"updated_at":null}}]},{"id":9159,"part_number":"0-52712-5 ","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"115VDC Dual Output Card","short_desc":"115 VDC Dual Output Card from Reliance Electric","content":"

0-52712-5 115 VDC Dual Output Card

The 0-52712-5 is a dual output board component manufactured by Reliance Electric for use within the company’s drives. While this board usually originates from Reliance, in some cases it may originate from either ABB(Asea Brown Boveri) or possibly from Baldor-Reliance. The 52712-5 number will always be reflected in the part id.

The 0-52712-5 functions as a 115 VDC Dual Output board. It is important to note there are many circuit boards similar to this one within this board series; please verify the exact board you are ordering. The 0-52712-5 is a five-sided board with a grid pattern printed on its surface. The grid is denoted on one axis by lettering and on another by numbering.

The 0-52712-5 has three large housings on its surface. The most forward of these is the board’s output device. This parallels the front and diagonal board edges and includes two LED indicators and several terminal screw connections in its front surface. The middle component is a large metal plate mounted parallel to the board’s surface using screw connections. This component is mounted above other board components. The last of these components is placed on the board’s rear edge and is mounted using three screws.

Other components on the 0-52712-5 include integrated circuits, transistors, metal film resistors, capacitors, disk capacitors, transistors, diodes, carbon composite resistors, and metal oxide varistors. Product manuals and series user guides originally published by Reliance for technical support will provide more detailed information regarding board operation, installation, and handling.

","meta_title":"115VDC Dual Output Card","meta_description":"115VDC Dual Output Card","keywords":"115VDC Dual Output Card","series_page_description":"115VDC Dual Output Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 09:22:18","prod_pdf":[{"id":3031,"product_id":9159,"pdf_id":15677,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15677,"pdf_type_id":1,"file_name":"0-52712-5 .pdf","title_tag":"115VDC Dual Output Card","alt_tag":"115VDC Dual Output Card","created_at":null,"updated_at":null}}]},{"id":9092,"part_number":"0-52712-6","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":9,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Contact Output Board","short_desc":null,"content":"

The 0-52712-6 is an output card created by Reliance Electric. The 0-52712-6 is an oddly shaped card. The upper edge is angled and has a small handle on the right next to the angled section. The angled section is a black section that is solid and has stair style angles in it that face the interior of the card. Below the black stair, piece is five metal tabs three of which have wires attached to them. Then there are two large transformers that are enclosed in clear plastic. The transformer on the left is labeled R40-E3-W2-V800, 24 V DC with a circuit drawn below that. The transformer on the right is labeled R40-EO166-2, R40-E3-W2 V800, 24V DC 411029-3 with a drawing of a circuit below that. There are three more metal tabs in between the resistors with the middle metal tab having a wire attached to it. The 0-52712-6 card has eleven brown color resistors known as carbon composition resistors. There are also two small white fusible resistors with their specification written on them. There are six small black transistors along the center of the output card. The card also has two integrated circuits and a small red capacitor. The 0-52712-6 also has nine bare metal wires attached around the lower half of the circuit board and a long black wire as well. The lower edge has eleven flat metal tabs. The output card also has a grid on the surface labeled with letters down the long edge and numbers across the center of the card because of the angled top edge.

","meta_title":"Reliance Electric Contact Output Board","meta_description":"Reliance Electric Contact Output Board","keywords":"Reliance Electric Contact Output Board","series_page_description":"Reliance Electric Contact Output Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 08:54:42","prod_pdf":[{"id":3030,"product_id":9092,"pdf_id":15678,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15678,"pdf_type_id":1,"file_name":"0-52712-6.pdf","title_tag":"Reliance Electric Contact Output Board","alt_tag":"Reliance Electric Contact Output Board","created_at":null,"updated_at":null}}]},{"id":9157,"part_number":"0-52712-7","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Output Frequency Module Board","short_desc":"The 0-52712-7 is a Reliance Output Frequency Module","content":"

0-52712-7 PC Output Frequency Module Card

The 0-52712-7 from Reliance Electric is a PC Output Frequency Module Card. This circuit board is manufactured by Reliance for use within the company’s drive systems. In some cases, this product may originate from Baldor-Reliance or from ABB. In all cases, the id number for this part will remain the same.

The 0-52712-7 does not include a front faceplate like many cards in this series. Instead, the 0-52712-7 is a five-sided card with a narrow leading edge that is designed like a handle. This edge has an oval cut-out located just within its boundaries. The front left edge of the card is cut away, sloping down to meet the left card edge and creating the fifth board edge. This edge has a large black component that is used as the board’s output module. The module is marked UM50872, and is designed as two interlocking pieces. The board also has a separate black component located on its rear edge, marked 800756-6A. This connects to the board using three screws threaded from the bottom of the card.

Other components on the PCB’s surface include ceramic capacitors, metal film resistors, transistors of two types, diodes, surface wiring connected to vertical pin components, and fourteen integrated circuits. ICs include binary counters and analog bus drivers.

If more information regarding the operation of this board is needed, or if detailed information regarding its installation is required, please refer to publications originally provided by Reliance, such as series user guides, manuals, or product data sheets.

","meta_title":"PC Output Frequency Module Board","meta_description":"PC Output Frequency Module Board","keywords":"PC Output Frequency Module Board","series_page_description":"PC Output Frequency Module Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 08:10:49","prod_pdf":[{"id":3028,"product_id":9157,"pdf_id":15679,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15679,"pdf_type_id":1,"file_name":"0-52712-7.pdf","title_tag":"PC Output Frequency Module Board","alt_tag":"PC Output Frequency Module Board","created_at":null,"updated_at":null}}]},{"id":9152,"part_number":"0-52712-9","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"24VAC Dual Output Drive Board","short_desc":"24VAC Dual Output Drive Board from Reliance Electric","content":"

0-52712-9 Dual Output Card 24 VAC

The 0-52712-9 is a Dual Output Card (24 VAC) fabricated by Reliance Electric. This board is designed to fit into Reliance drive systems. The board can be marked in some instances as being manufactured by Baldor Reliance, or in some rare cases by Asea Brown Boveri. In all instances, the 52712-9 number will remain in the part id. This circuit board is no longer manufactured.

The 0-52712-9 does not have extraction clips or an attached faceplate. The board is manufactured with a longer right edge and a longer back edge (as compared to the front and left.) There is a long oval cut out placed directly below the short leading edge, creating a sort of handle in the board’s surface. This is located directly above the board’s input component. This parallels both the top and diagonal sides of the board. The input component includes screw connections and LED indicators mounted in its front surface.

Other components located on the surface of the 0-52712-9 include transistors, integrated circuits, metal oxide varistors (MOV,) disk capacitors, other types of capacitors, CCRs and metal film resistors, diodes, and surface wiring. The rear edge of the board is populated by eleven metal clips. The board is marked “17” on one side of these clips and is marked “5” on the other side. The board also has a large metal panel mounted parallel to the board’s surface. This is labeled 705329-R. It is mounted using four screws threaded from the bottom surface of the board. Please consult Reliance manuals or user guides for more detailed information.

","meta_title":"24VAC Dual Output Drive Board","meta_description":"24VAC Dual Output Drive Board","keywords":"24VAC Dual Output Drive Board","series_page_description":"24VAC Dual Output Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 08:16:19","prod_pdf":[{"id":3029,"product_id":9152,"pdf_id":15680,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15680,"pdf_type_id":1,"file_name":"0-52712-9.pdf","title_tag":"24VAC Dual Output Drive Board","alt_tag":"24VAC Dual Output Drive Board","created_at":null,"updated_at":null}}]},{"id":8956,"part_number":"0-52803-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Frequency to Voltage FVCC Board","short_desc":"The 0-52803-2 is a Reliance FVCC Frequency to Voltage Converter Board","content":"

0-52803-2 FVCC Frequency to Voltage Converter Board

The 0-52803-2 is a Reliance circuit board component that has been manufactured for the company’s drive systems. This is a circuit board and faceplate module that usually is marked with the Reliance logo; in some cases, however, it may carry ABB or Baldor Reliance markings instead. This can be attributed to changes in company structure. The 52803-2 number should remain as the part number in all cases.

The 0-52803-2 is a Frequency to Voltage Converter Card. The circuit board connects to a faceplate with a ten-screw terminal strip and a single opening for a potentiometer. This opening is labeled “gain.” The connections on the terminal strip wire into the surface of the board using surface wiring from their back edge to the board’s surface.

Other components used on the surface of the 0-52803-2 include two additional potentiometers, transistors, surface wiring, metal film resistors, and carbon composite resistors along with diodes. The board has capacitors made from several kinds of materials. This includes ceramic disk capacitors. The board has thirteen integrated circuits. Circuits are marked on their top surface with manufacturer part numbers. The board has a conductive backplane connector extending from its rear edge. TP test points are located in several places on the board’s surface. The board is marked across its surface with a grid pattern. It is drilled in multiple locations.

Reliance product manuals and user guides will provide the end user with more detailed information regarding the operation of the 0-52803-2. These publications will also provide more information regarding proper installation procedures.

","meta_title":"Frequency to Voltage FVCC Board","meta_description":"Frequency to Voltage FVCC Board","keywords":"Frequency to Voltage FVCC Board","series_page_description":"Frequency to Voltage FVCC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 14:07:44","prod_pdf":[{"id":3025,"product_id":8956,"pdf_id":15681,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15681,"pdf_type_id":1,"file_name":"0-52803-2.pdf","title_tag":"Frequency to Voltage FVCC Board","alt_tag":"Frequency to Voltage FVCC Board","created_at":null,"updated_at":null}}]},{"id":9161,"part_number":"0-52806","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Overspeed Tach Loss PC Board","short_desc":"0-52806 is an Overspeed Tach Loss Board from Reliance","content":"

0-52806 Overspeed Tach Loss PC Board TLOA

The 0-52806 is a Reliance Electric board component that is typically used within the company’s drive systems. In some cases, this product originates from ABB/Asea Brown Boveri or from Baldor Reliance. The 52806 part id remains the same in all these cases.

The 0-52806 functions as an Overspeed Tach Loss Card. This board is designed to monitor a speed-regulated system’s tachometer signal and compare it with the system’s speed reference. The board’s front panel is designed with two LED indicators, an opening to a component, and a terminal strip built with twelve screw connections. The LEDs are labeled ‘tach loss’ and ‘over speed.’ The opening is labeled ‘tach calibration’ and allows access to a potentiometer located on the surface of the circuit board. The terminal strip includes its own smaller cover that connects to the strip using two screws. Surface wiring is used to connect the terminal strip connections to the circuit board’s surface; these connections run from the back of the faceplate to the board.

The board portion of the 0-52806 is populated by a transformer. This is marked TR-12174. It has one relay, six transistors, six integrated circuits, along with disk capacitors, diodes, metal film resistors, and other capacitors made from polyester vinyl and other materials. The board has several vertical pin connectors that attach to surface wiring. Surface wires are used elsewhere on the board. A grid pattern is printed on the board’s surface.

Installation and maintenance details can be found through publications originally provided by Reliance, such as product data sheets, series user guides, and manuals.

","meta_title":"Overspeed Tach Loss PC Board","meta_description":"Overspeed Tach Loss PC Board","keywords":"Overspeed Tach Loss PC Board","series_page_description":"Overspeed Tach Loss PC Board","quote_description":null,"inventory_notes":"","cross_reference":"0-55806 ","created_at":null,"updated_at":"2019-04-08 08:43:06","prod_pdf":[{"id":3026,"product_id":9161,"pdf_id":15682,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15682,"pdf_type_id":1,"file_name":"0-52806.pdf","title_tag":"Overspeed Tach Loss PC Board","alt_tag":"Overspeed Tach Loss PC Board","created_at":null,"updated_at":null}}]},{"id":9162,"part_number":"0-52806-01","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Overspeed Control PC Board","short_desc":"0-52806-01 Tach Loss/Overspeed Board from Reliance Electric","content":"

0-52806-01 Tach Loss Overspeed Board

The 0-52806-01 is a Reliance Electric board component manufactured for use within the company’s various drives. This board typically is marked as a Reliance board; however, in some cases, it may originate from Asea Brown Boveri (ABB) or possibly from Baldor-Reliance. Please note the part id will always reflect “52806-01.”

The 0-52806-01 functions as a Tach Loss Overspeed Board. Its primary function is to monitor speed-regulated systems tachometer signals and compare those with the main system’s speed reference. The 0-52806-01 has an attached front panel that includes access to a calibrating potentiometer on the circuit board’s surface. This is labeled “tach calibration.” The panel has two LED indicators that are labeled ‘tach’ and ‘overspeed.’ It has a reset button and a twelve position terminal strip with its own smaller cover that attaches with two screws. This front panel also has two set screws that lock the circuit board into place within a rack system.

The circuit board portion of the 0-52806-01 a relay located in one rear corner. It has one transformer that is marked by TR-12174 411027-5-R. The board has six integrated circuits, six transistors, various capacitors including disk capacitors, resistors, diodes, surface wiring, and terminal pins. Surface wires are used to connect larger components like the transformer to the board or to connect panel components to board components. The rear edge of the board extends in a conductive backplane connector.

More detailed information about the board, including details regarding installation and operation, may be found through Reliance publications like product manuals and series user guides.

","meta_title":"Overspeed Control PC Board","meta_description":"Overspeed Control PC Board","keywords":"Overspeed Control PC Board","series_page_description":"Overspeed Control PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 09:48:20","prod_pdf":[{"id":3027,"product_id":9162,"pdf_id":15683,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15683,"pdf_type_id":1,"file_name":"0-52806-01.pdf","title_tag":"Overspeed Control PC Board","alt_tag":"Overspeed Control PC Board","created_at":null,"updated_at":null}}]},{"id":8957,"part_number":"0-52806-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board with Tachometer","short_desc":"0-52806-1 TLOB Tach Loss Over Speed Board from Reliance","content":"

0-52806-1 TLOB Tach Loss Over Speed Board

The 0-52806-1 is a board component manufactured by Reliance electric for use within their drive systems.

The 0-52806-1 functions as a Tach Loss Over Speed Board. This module is designed with an attached faceplate. The faceplate on the 0-52806-1 is populated with two red LED indicators, one that is labeled “Over Speed” and another that is labeled “Tach Loss.” The panel has a reset button, an opening labeled “Tach Calibration” that gives access to a potentiometer located on the surface of the circuit board, and a twelve-position terminal strip that runs down the right panel edge. Many of these screw connections are individually labeled. The terminal strip is designed with its own cover that connects with two screws.

The 0-52806-1 is populated by a TR-12174 411027-5-R transformer with multiple wired connections. The board has one relay that is located on the rear board edge. It has several stab-on connectors, as well as transistors, stab-on connectors, integrated circuits, resistors, diodes, and capacitors. Capacitors are made of a number of different materials, including ceramic and aluminum electrolytic mediums. While most components are axial components mounted directly to the board, a few components are mounted to posts above the board’s surface. The board is printed with a grid pattern.

If more information is required about board operation, or if detailed instructions for installation are desired, please refer to Reliance publications such as data sheets, manuals, or user guides for this information. Reliance provided technical support for the 0-52806-1 and other boards in this series.

","meta_title":"PC Board with Tachometer","meta_description":"PC Board with Tachometer","keywords":"PC Board with Tachometer","series_page_description":"PC Board with Tachometer","quote_description":null,"inventory_notes":"1 has factory box","cross_reference":"","created_at":null,"updated_at":"2019-04-04 14:26:04","prod_pdf":[{"id":3024,"product_id":8957,"pdf_id":15684,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15684,"pdf_type_id":1,"file_name":"0-52806-1.pdf","title_tag":"PC Board with Tachometer","alt_tag":"PC Board with Tachometer","created_at":null,"updated_at":null}}]},{"id":17728,"part_number":"0-52807","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD VSSA","short_desc":null,"content":"

The 0-52807 is a VSSA module printed circuit board from Reliance Electric. The VSSA is a circuit board that is used in a power rack. The front of the 0-52807 is exposed while placed in the rack and features the module type (VSSA) and the part number (0-52807) printed on the front for easy identification. The 0-52807’s front panel also has a dial marked Zero Set and the dial itself is marked zero through ten. Below the dial is a standard terminal block with a small black cover over the top, with holes drilled in it to access the screws. The standard terminal has wires that connect to metal pins on the circuit board labeled 88, 89, 1, 2, 3, and 4. The 0-52807’s circuit board section features two large transformers held in place with metal brackets. On the top of each bracket, the transformers are labeled. On the top transformer near the top of the card, it reads TR 8825, 63125-7-A and on the transformer closer to the bottom of the card it reads TR-10282, 64977-85-A. In between the transformers are four Zenner diodes and two signal diodes. Behind the transformers are three large polypropylene style condensers and a large thick wire resistor. Behind the large condensers and the large resistor are seven linear style resistors. The 0-52807 is also laid out with a grid pattern and labeled with numbers zero to eighty (increasing by fives) on the upper edge and single letters or pairs of letters on the left edge.

","meta_title":"RELIANCE ELECTRIC PC BOARD VSSA","meta_description":"RELIANCE ELECTRIC PC BOARD VSSA","keywords":"RELIANCE ELECTRIC PC BOARD VSSA","series_page_description":"RELIANCE ELECTRIC PC BOARD VSSA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-15 12:18:01","prod_pdf":[]},{"id":8958,"part_number":"0-52808","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":9,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Circuit Board","short_desc":"The 0-52808 is a OLVA Static Overload Voltage Relay Board from Reliance","content":"

0-52808 OLVA Static Overload Voltage Relay Board

The 0-52808 is a circuit board and faceplate manufactured by Reliance. This is most often used in Reliance drive systems. Due to changes in company structure, this board may be notated as being a Baldor-Reliance component, or possibly from ABB, also known as Asea Brown Boveri. The 52808 number will still be reflected in the part id number.

The 0-52808 is a Static Overload Voltage Relay Board. The faceplate has a ten-position terminal strip along its right edge that has its own cover screwed into its ends. The screw connections of the terminal strip are individually numbered and labeled. Screws 1 and 2 are labeled Calib. Screws 5, 6, and 7 are labeled OL. Screws 8, 9, and 10 are labeled VR. The faceplate also has a reset switch and two red LED indicators that are labeled VR RELAY ON and OVERLOAD. These components wire into the board using, most often using surface wiring.

The 0-52808 has two relays located near its front edge. It has eight disk capacitors and other capacitors made of electrolytic material and polyester vinyl. The board has several transistors. It uses metal film resistors and has several diodes on its surface. The back edge of the board is fashioned into a conductive backplane connector. The surface of the board has been printed with a grid pattern. One axis is denoted by numbers by fives while the other uses letters.

If more information about the board is desired, especially detailed information regarding board operation or installation, please refer to publications from Reliance. This includes such items as product manuals, user guides, and data sheets.

","meta_title":"Reliance Circuit Board","meta_description":"Reliance Circuit Board","keywords":"Reliance Circuit Board","series_page_description":"Reliance Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 10:22:12","prod_pdf":[{"id":3147,"product_id":8958,"pdf_id":14282,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14282,"pdf_type_id":1,"file_name":"0-52808.pdf","title_tag":"Reliance Circuit Board | PDF","alt_tag":"Reliance Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":9165,"part_number":"0-52808-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"OLVA Voltage Board","short_desc":"0-52808-1 is a Voltage Board from Reliance Electric","content":"

0-52808-1 OLVA Voltage Board

The 0-52808-1 is an OLVA Voltage Circuit Board manufactured by Reliance Electric. This board is typically used in the company’s drive systems. In most cases, it originates from Reliance, but in some instances, the component may originate from Baldor-Reliance or from ABB. In all cases, the 52808-1 number will be reflected in the part id.

The 0-52808-1 has a front faceplate connected to the circuit board using three screw connections. The faceplate has a red push button reset switch, two red LED indicators (VR Relay On and Overload), and a ten position terminal strip. The terminal strip has its own smaller cover that attaches at the two ends of the component. The screw components are numbered and are also labeled as follows: Calib 1 and 2, no label 3 and 4, OL 5 and 6, OL 7, VR 8 and 9, and VR 10. The faceplate includes a set screw located at the top and bottom of the panel. These are designed to lock the board component into place after it is set in position within a rack system.

The 0-52808-1 has two relay components. It has over a dozen transistors, along with disk capacitors, integrated circuits, resistors, diodes, and capacitors made from other materials. Surface wiring is used extensively on this board. It has a grid pattern printed on its surface and includes a conductive backplane located in the center of its rear edge. More information about the 0-52808-1 can be found through manuals, data sheets, or user guides originally provided by Reliance Electric.

The team at AX Control is happy to provide shipping quotes to your location upon request.

","meta_title":"OLVA Voltage Board","meta_description":"OLVA Voltage Board","keywords":"OLVA Voltage Board","series_page_description":"OLVA Voltage Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 09:08:18","prod_pdf":[{"id":3020,"product_id":9165,"pdf_id":15685,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15685,"pdf_type_id":1,"file_name":"0-52808-1.pdf","title_tag":"OLVA Voltage Board","alt_tag":"OLVA Voltage Board","created_at":null,"updated_at":null}}]},{"id":8959,"part_number":"0-52808-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":9,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"OLVC Reliance Board","short_desc":"OLVC Reliance Board","content":"

0-52808-2 OLVC Module

The 0-52808-2 is a component manufactured by Reliance Electric. This is a faceplate and PCB board component combination that is typically used within Reliance drive systems. In some cases, the 0-52808-2 may carry markings from Baldor-Reliance or from ABB as well as/instead of Reliance. This is due to changes in company structure. The 52808-2 number should remain within the part id.

The faceplate component of the 0-52808-2 includes five LED indicators. These are split by a red reset button as a bank of three and a bank of two. The bank of three LEDs, located toward the top of the faceplate, are labeled ARM VOLT COMPARATOR, PHASE SEQ, and FIELD SUPPLY. The other two LED indicators, located toward the bottom of the faceplate, are labeled OVERLOAD FAULT and IET FAULT. The faceplate includes two set screws to lock the module within the rack system after installation. All LEDs and the pushbutton wire into the front of the circuit board.

The 0-52808-2 is a component-dense board. It has seven polyester vinyl capacitors, along with capacitors made from ceramic material and electrolytic material. The board has over seventy-five metal film resistors of varying size and resistance. The board has transistors, TP test points, and over a dozen integrated circuits. The board includes a conductive backplane connector.

If more information is desired regarding board operation or how to properly install or maintain this equipment, please refer to publications from Reliance. This includes user guides, data sheets, and product manuals.

AX Control ships parts daily Monday through Friday from our warehouse located in central North Carolina. Most parts listed “in stock” will ship the same day your order is placed.

","meta_title":"OLVC Reliance Board","meta_description":"OLVC Reliance Board","keywords":"OLVC Reliance Board","series_page_description":"OLVC Reliance Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 09:59:32","prod_pdf":[{"id":3145,"product_id":8959,"pdf_id":14283,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14283,"pdf_type_id":1,"file_name":"0-52808-2.pdf","title_tag":"OLVC Reliance Board | PDF","alt_tag":"OLVC Reliance Board | PDF","created_at":null,"updated_at":null}}]},{"id":9166,"part_number":"0-52808-3","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"OLVD PC Board","short_desc":"The 0-52808-3 is an O/L V OLVD board from Reliance Electric","content":"

0-52808-3 O/L Voltage Overload OLVD Board

The 0-52808-3 is a Voltage Overload Board manufactured by Reliance Electric (OLVD.) This is one of several versions of this kind of board available in this series; please verify before placing your order which is best suited for your system. Our team can help with this process.

The 0-52808-3 is designed with a faceplate that includes a ten position terminal strip, a reset push button switch, and two LED indicators. The LEDs, both red, are labeled VR Relay On and Overload. The terminal strip screws are each numbered from one to ten and also are labeled as follows: 1 and 2--calib. 3 and 4--no label. 5, 6, and 7--OL. 8, 9, and 10, VR. The front panel includes two set screws to lock the circuit board into place within a rack system. These screws are usually finger tightened.

The board portion of the 0-52808-3 is printed with a grid pattern. It has a backplane connector designed with conductive tabs located on the back board edge. Surface wiring is used to connect board components and to connect front panel components to the PCB. The circuit board has two relays, seven integrated circuits, ceramic capacitors including disk capacitors, transistors, metal film resistors, polyester vinyl capacitors, diodes, and other types of capacitors.

Reliance publications like data sheets, product manuals, and user guides will provide more information regarding installation, operation, or the maintenance of this product. In some cases, this circuit board may be marked as coming from Asea Brown Boveri/ABB or from Baldor-Reliance. The 52808-3 number will be included in the part id regardless of manufacturer.

","meta_title":"OLVD PC Board","meta_description":"OLVD PC Board","keywords":"OLVD PC Board","series_page_description":"OLVD PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 09:29:32","prod_pdf":[{"id":3021,"product_id":9166,"pdf_id":15686,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15686,"pdf_type_id":1,"file_name":"0-52808-3.pdf","title_tag":"OLVD PC Board","alt_tag":"OLVD PC Board","created_at":null,"updated_at":null}}]},{"id":9164,"part_number":"0-52808-4","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Drive Circuit Board","short_desc":"Reliance Circuit Board","content":"

0-52808-4

The 0-52808-4 is a component manufactured by Reliance Electric for use within its drive systems. In some cases, this circuit board may be noted as manufactured by Baldor Reliance or by ABB.

The 0-52808-4 has a faceplate connected to the circuit board that includes five LED indicators and a single push button component. The LED indicators on the top half of the board are labeled ‘arm volt comparator,’ ‘phase seq,’ and field supply.’ The two LEDs on the bottom half of the board are labeled ‘overload fault’ and ‘IET fault.’ The faceplate also includes two screws to lock the component in place in the rack. These are usually finger tightened to avoid possible over-tightening.

The board portion of the 0-52808-4 is populated by transistors of several types, TP test points, metal film resistors of varying resistance, and thirteen integrated circuits. Capacitors are made from ceramic material and from polyester vinyl. Surface wiring is evident on the board. The front surface is printed with a grid with one axis designated by letters and another by numbers. The board has a connected backplane that extends as a conductive tab from the rear edge of the board. More information can be found through publications from the OEM (original equipment manufacturer) like manuals and data sheets. Reliance furnished these technical publications as ongoing technical support. These will also give the user more information regarding proper installation, operation, and handling.

AX Control is located in central North Carolina, south of Raleigh. Our team can provide you with a shipping quote for your order upon request.

","meta_title":"Drive Circuit Board","meta_description":"Drive Circuit Board","keywords":"Drive Circuit Board","series_page_description":"Drive Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 07:48:35","prod_pdf":[{"id":3022,"product_id":9164,"pdf_id":15687,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15687,"pdf_type_id":1,"file_name":"0-52808-4.pdf","title_tag":"Drive Circuit Board","alt_tag":"Drive Circuit Board","created_at":null,"updated_at":null}}]},{"id":9163,"part_number":"0-52808-5","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric Circuit Card","short_desc":"0-52808-5 is a Reliance Electric board component","content":"

0-52808-5

The 0-52808-5 is a Reliance Electric PCB component fabricated for the company’s drive systems. In some cases, this board may originate from a different manufacturer, including Baldor-Reliance and ABB. The 52808-5 number will remain in the part ID.

The 0-52808-5 is composed of two primary parts. This includes the front faceplate and the circuit board. The faceplate is narrow and silver, with a set screw for locking the component in place at the top and bottom edges of the panel. Set screws are usually finger tightened. The only component located on the faceplate of this board is a six-position terminal strip that has a smaller black cover attached to it with two screws.

The board portion of the 0-52808-5 attaches to the faceplate using three screws. The top surface of the board has been marked with a grid pattern. There are only a few components on the board’s surface. Included among these are several lines of diodes, an integrated circuit, ceramic capacitors, metal film resistors, transistors, and terminal pin connectors with surface wiring connections. Most of the surface wires noted connect to the terminal strip on the faceplate. More detailed information about this board, including information regarding its installation, operation, and handling, can be found through Reliance publications like manuals and user guides.

The warehouse facilities of AX Control are located south of Raleigh in central North Carolina. Our team is happy to supply a shipping quote to your location, upon request. We work with multiple shipping carriers to give our customers as many shipping options as possible.

","meta_title":"Reliance Electric Circuit Card","meta_description":"Reliance Electric Circuit Card","keywords":"Reliance Electric Circuit Card","series_page_description":"Reliance Electric Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-09 09:43:27","prod_pdf":[{"id":3023,"product_id":9163,"pdf_id":15688,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15688,"pdf_type_id":1,"file_name":"0-52808-5.pdf","title_tag":"Reliance Electric Circuit Card","alt_tag":"Reliance Electric Circuit Card","created_at":null,"updated_at":null}}]},{"id":16825,"part_number":"0-52819","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD PRMA","short_desc":null,"content":"

The 0-52819 is a PRMA circuit board manufactured by Reliance Electric. The 0-52819 is a dual circuit board. There is a larger base card which is labeled 0-52819 (PC 1) and a seconded smaller circuit board labeled 0-52819 (PC 2). The PC 2 card covers most of the PC 1 card, so only some of the components on the PC 1 card will be addressed, the rest will be featured on the PC 2 card. The PC 1 card has a small dark blue variable resistor on the top left corner. There is also a varistor resistor next to the variable resistor. The PC 1 card has three long black boxes going down the left side of the PC 1 card. Each black box has eight white switches with the numbers written above each button. It the button is pushed up then it’s on and if the button is pushed down then it is in the off position. Each of these buttons is independent of each other. In between these black boxes with buttons are a series of Zenner diodes. The PC 2 card has twelve integrated circuits. The PC 2 card has nine mustard yellow circular varistor resistors. The 0-52819 PC 2 board has two silver transistors and three black transistors. There are also three small red relay boxes on the left corner of the PC 2 card. The 0-52819 also has a front panel with a terminal with ten openings.

Call or email the staff at AX Control for additional details.

","meta_title":"RELIANCE ELECTRIC PC BOARD PRMA","meta_description":"RELIANCE ELECTRIC PC BOARD PRMA","keywords":"RELIANCE ELECTRIC PC BOARD PRMA","series_page_description":"RELIANCE ELECTRIC PC BOARD PRMA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-15 09:36:18","prod_pdf":[]},{"id":8960,"part_number":"0-52820","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RPIA Card","short_desc":null,"content":"

0-52820 RPIA Card

The 0-52820 is a board fabricated by the Reliance Electric, LTD manufacturer. This board is used primarily in Reliance drive systems. It is marked with the company logo. However, in certain cases, your current board component might have shipped from either Baldor-Reliance or from Asea Brown Boveri/ABB. If you have any questions about whether your current circuit board is compatible with this listing, please speak to one of our team members for more information.

The 0-52820 is an RPIA board. It is built with an attached faceplate with two set screws (one at the top and one at the bottom) that lock it securely into place within a rack system once installed. The faceplate also includes a single red LED indicator and a terminal strip with six screw connections. Both of these components are located on the left (top) edge of the faceplate. Terminal screws wire into the board surface using black wire connections.

The 0-52820 is populated by a single large transformer in a frame that wires into the board’s surface using different colored wires. The board also has over fifteen integrated circuits, resistor network arrays, resistors, capacitors, transistors, and diodes. Capacitors may be made of ceramic material or of an aluminum electrolytic medium. At least one capacitor has been secondarily supported by a zip tie connection. The board includes a conductive backplane and has a grid pattern printed on its surface. Components are not marked with reference designators but may be marked with part numbers from their original manufacturer. For more detailed information, please refer to Reliance data sheets or manuals.

","meta_title":"RPIA Card","meta_description":"RPIA Card","keywords":"RPIA Card","series_page_description":"RPIA Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-24 09:31:16","prod_pdf":[{"id":3144,"product_id":8960,"pdf_id":14284,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14284,"pdf_type_id":1,"file_name":"0-52820.pdf","title_tag":"RPIA Card | PDF","alt_tag":"RPIA Card | PDF","created_at":null,"updated_at":null}}]},{"id":8961,"part_number":"0-52821","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance RPOA Card","short_desc":"The 0-52821 is a RPOA board from Reliance","content":"

0-52821 RPOA

The 0-52821 board is a Reliance module component manufactured for use within various drive systems manufactured by that company and other compatible drives. The 0-52821 is a single board component with an attached faceplate. Typically, this is marked with the Reliance logo; however, in some cases, it may be marked as being manufactured by ABB or by Baldor-Reliance.

The faceplate attached to the 0-52821 has two red LED indicators inserted into its top third. These are labeled “power” and “data valid.” The bottom right edge is populated by a six-screw terminal strip that is then covered by its own removable cover held on by two screws. The screw connections on this component are individually labeled as 189, 188 (both labeled 115 VAC,) 56+, 57- (both labeled Aux Pwr,) 4-, 3+ (both labeled Serial Data Input.) The faceplate also includes two set screws to lock the circuit board into a rack system. These are placed at the top and bottom of the faceplate.

The board portion of the 0-52821 connects to the faceplate using screw connections. It is populated by a TR-12174 411027-5-R transformer that connects to the board using various colored wire connections. It has several transistors, twelve integrated circuits, diodes, resistors, and capacitors. Capacitors include disk capacitors. The board also has two lines of MOVS (metal oxide varistors) located toward the board’s back edge. There are eight resistor network arrays on the board, along with several pin connections. The board’s surface is printed in a grid pattern. More information about how this board operates or detailed installation instructions may be found through technical support publications from Reliance Electric like manuals and user guides.

","meta_title":"Reliance RPOA Card","meta_description":"Reliance RPOA Card","keywords":"Reliance RPOA Card","series_page_description":"Reliance RPOA Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 14:53:08","prod_pdf":[{"id":3143,"product_id":8961,"pdf_id":14285,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14285,"pdf_type_id":1,"file_name":"0-52821.pdf","title_tag":"Reliance RPOA Card | PDF","alt_tag":"Reliance RPOA Card | PDF","created_at":null,"updated_at":null}}]},{"id":9167,"part_number":"0-52821-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RPOB Circuit Card","short_desc":"The 0-52821-1 is a RPOB circuit board from Reliance Electric","content":"

0-52821-1 RPOB Circuit board

The 0-52821-1 is a module component fabricated by Reliance Electric for use in the company’s various drive systems. The 0-52821-1 is comprised of a front faceplate attached to a single circuit board. This component is typically marked as coming from Reliance Electric; however, depending on the year the board was manufactured, it may be marked with a logo indicating it originated from ABB or from Baldor-Reliance. In all these cases, the 52821-1 part should remain.

The 0-52821-1 includes a faceplate that includes two LED indicators. These indicators are both red and are located in the top third of the board. They are labeled Power and Data Valid. The other component located on the front faceplate is a terminal strip with six screw connections. This terminal strip has its own black cover plate that connects to the faceplate via two screws. The screw mounts are each individually labeled. The faceplate mounts into a rack system and is secured using set screws.

The circuit board portion of the 0-52821-1 is connected to the faceplate using screw mounts. It has a single large transformer with multiple colored wired connections. The board also has several integrated circuits, transistors, diodes, resistors, and capacitors. Disk capacitors are used on this board. The board also uses several resistor network arrays. More information about how the board operates may be found by accessing Reliance publications. This includes manuals, data sheets, and user guides.

AX Control is happy to provide you with a quote on your preferred shipping method upon request. Our facilities are located near Raleigh, North Carolina. We work with several large carrier services to provide our customers with many shipping options.

","meta_title":"RPOB Circuit Card","meta_description":"RPOB Circuit Card","keywords":"RPOB Circuit Card","series_page_description":"RPOB Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 15:14:38","prod_pdf":[{"id":3019,"product_id":9167,"pdf_id":15689,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15689,"pdf_type_id":1,"file_name":"0-52821-1.pdf","title_tag":"RPOB Circuit Card","alt_tag":"RPOB Circuit Card","created_at":null,"updated_at":null}}]},{"id":8962,"part_number":"0-52823","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":18,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance PC Board Card","short_desc":"The 0-52823 is a DFSA Digital Firing Card from Reliance","content":"

0-52823 DFSA Digital Firing Board

The 0-52823 is a Reliance Electric board component manufactured for use within the company’s drive systems.

The 0-52823 is built with a narrow faceplate attached to the board’s circuit board component. This faceplate has no components built into its surface. The faceplate has a set screw located at its top and bottom edges to allow the board to be locked into place within a rack system.

The 0-52823 is marked on the board surface with a grid pattern. This is notated along one axis by letters and along its second axis by numbers by fives. The component number is located along the bottom board edge. The board itself is populated by a single polyester vinyl capacitor, several ceramic disk capacitors, and metal film resistors. The board has thirty integrated circuits on its surface. This includes XNOR gates, high-performance analog decoder/drivers, and NAND gates. Most ICs are marked with their manufacturer’s part numbers to allow the user to easily identify and replace any chip that may have an issue. Please note that all used parts purchased from AX Control go through a thorough refurbishment process.

The rear edge of the 0-52823 extends in its center and is covered by conductive tabs. This acts as a backplane connector when the board is inserted into a rack system. For more information on the board, including detailed installation instructions, please refer to manuals and user guides originally provided by Reliance Electric. As the OEM (original equipment manufacturer) Reliance was responsible for all technical support for this product.

","meta_title":"Reliance PC Board Card","meta_description":"Reliance PC Board Card","keywords":"Reliance PC Board Card","series_page_description":"Reliance PC Board Card","quote_description":null,"inventory_notes":"one has no box","cross_reference":"","created_at":null,"updated_at":"2019-04-03 15:33:07","prod_pdf":[{"id":3142,"product_id":8962,"pdf_id":14286,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14286,"pdf_type_id":1,"file_name":"0-52823.pdf","title_tag":"Reliance PC Board Card | PDF","alt_tag":"Reliance PC Board Card | PDF","created_at":null,"updated_at":null}}]},{"id":9168,"part_number":"0-52823-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Module Board","short_desc":"Reliance Electric 0-52823 board component","content":"

0-52823-1

The 0-52823-1 is a Reliance Electric board component made for use within the company’s various drive systems. While the board typically originates from Reliance, there are some cases with this component is manufactured by either Baldor-Reliance or by Asea Brown Boveri. In all of these situations, “52823-1” will be reflected in the part id.

The 0-52823-1 is designed with a front panel that connects to the circuit board via three screws. This faceplate has two set screws that lock the module in place within a rack system. It also has four rotary dials that may be set between zero and ten. Each dial is individually labeled with the value it is responsible for. Below these four components, the front panel is populated by a single green LED indicator and seven red LEDs. These are all labeled.

The board portion of the 0-52823-1 is printed with a grid pattern. The front edge of the board has four potentiometers that each connect to the dials fitted into the front panel. There is an additional potentiometer located near the center of the board. The board has a single relay component located on its back edge. Other components include integrated circuits, transistors, diodes, resistors, disk capacitors, and other capacitors. The board has a conductive backplane connector.

More information regarding the 0-52823-1 can be found through original Reliance publications. These publications, like user guides and manuals, were provided to users by Reliance as ongoing technical support.

AX Control maintains a large inventory of industrial automation parts from manufacturers like Horner, Parker Eurotherm, GE, and Fuji. Our team will be happy to assist you with any questions you have with our products. Please contact us directly if you need a product that is not represented on our website.

","meta_title":"PC Module Board","meta_description":"PC Module Board","keywords":"PC Module Board","series_page_description":"PC Module Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 10:13:00","prod_pdf":[{"id":3018,"product_id":9168,"pdf_id":15690,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15690,"pdf_type_id":1,"file_name":"0-52823-1.pdf","title_tag":"PC Module Board","alt_tag":"PC Module Board","created_at":null,"updated_at":null}}]},{"id":8963,"part_number":"0-52824","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":15,"new_stock":4,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Loop CLRA Regulator Card","short_desc":"The 0-52824 is a Reliance Current Loop Regulator","content":"

0-52824 CLRA Current Loop Regulator

The 0-52824 is a Reliance Electric circuit board fabricated for use within their drive systems. While this board is most often marked with the Reliance logo, in some cases it may carry the Baldor-Reliance or ABB logo in its place; this is due to changes in company structure. The number 52824 will always be reflected in the part id.

The 0-52824 is a Current Loop Regulator board. It is designed with an attached front faceplate that has a set screw at the top and bottom to lock the circuit board into place within the rack system. The faceplate includes three red LED indicators--one on the top third of the board and two on the bottom third--with two rotary dials placed between these indicators. The LEDs are labeled as gain limit, 1, and 2. The dials are labeled rate and gain. Each of the rotary dials connects to a potentiometer located behind the faceplate on the PCB’s surface.

The 0-52824 is marked with a grid pattern. This has one axis marked by letters and the other marked by numbers. The circuit board has over twenty-five integrated circuits including NAND gates, high-performance analog operational amplifiers, and XNOR gates. Several TP test points are used, along with metal film resistors, capacitors made from different materials, transistors, and a backplane connector. The code 802286-16A is printed on the rear surface of the board. If more detailed information regarding the operation or installation of this product is required, please refer to publications from Reliance Electric, such as product manuals or series user guides.

","meta_title":"Current Loop CLRA Regulator Card","meta_description":"Current Loop CLRA Regulator Card","keywords":"Current Loop CLRA Regulator Card","series_page_description":"Current Loop CLRA Regulator Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 08:28:58","prod_pdf":[{"id":3141,"product_id":8963,"pdf_id":14287,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14287,"pdf_type_id":1,"file_name":"0-52824.pdf","title_tag":"Current Loop CLRA Regulator Card | PDF","alt_tag":"Current Loop CLRA Regulator Card | PDF","created_at":null,"updated_at":null}}]},{"id":9169,"part_number":"0-52824-2","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric CLRC Card","short_desc":"","content":null,"meta_title":"Reliance Electric CLRC Card","meta_description":"Reliance Electric CLRC Card","keywords":"Reliance Electric CLRC Card","series_page_description":"Reliance Electric CLRC Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3017,"product_id":9169,"pdf_id":15691,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15691,"pdf_type_id":1,"file_name":"0-52824-2.pdf","title_tag":"Reliance Electric CLRC Card","alt_tag":"Reliance Electric CLRC Card","created_at":null,"updated_at":null}}]},{"id":8964,"part_number":"0-52837","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"ACCA Printed Circuit Analog Comparator Card","short_desc":"ACCA Printed Circuit Analog Comparator Card from Reliance","content":"

0-52837 ACCA Analog Comparator Card

The 0-52837 is a PCB fabricated and distributed by Reliance Electric. This board is most usually used within Reliance Electric drive systems.

The 0-52837 is an Analog Comparator Card that is designed with a faceplate connected to the circuit board component portion of the module. This is designed with a bank of six LED indicators over a second bank of four LED indicators. The first six LEDs are labeled FEED PERM, LOW SPD1, LOW SPD2, ZERO SPD, % OVSPD, and OVSPD. The last four LEDs are labeled STALL, TACH LOSS, FLD LOSS, and O/L. The faceplate also has a red reset push button located near its bottom edge. These LEDs and push button are wired into the attached circuit board.

Other than the components previously mentioned, the 0-52837 is populated by multiple components, including three polyester vinyl capacitors. One of these capacitors is secondarily supported and attached to the board using a zip tie. The board has surface wiring. It has metal film resistors, ceramic disk capacitors, transistors, and TP test points. The board is marked across its surface with a grid pattern. The back edge is marked with the code 802280-41A. If more detailed information regarding the operation, maintenance, or installation of this board component is desired, please refer to publications like series user guides or product manuals originally provided by Reliance Electric. As the original equipment manufacturer, Reliance was responsible for all technical support for this product. Please read, understand, and follow all safety procedures before unboxing and beginning work with this product.

If your company would like a shipping quote before placing your order, our team will be happy to provide one, upon request.

","meta_title":"ACCA Printed Circuit Analog Comparator Card","meta_description":"ACCA Printed Circuit Analog Comparator Card","keywords":"ACCA Printed Circuit Analog Comparator Card","series_page_description":"ACCA Printed Circuit Analog Comparator Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 08:59:45","prod_pdf":[{"id":3140,"product_id":8964,"pdf_id":14288,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14288,"pdf_type_id":1,"file_name":"0-52837.pdf","title_tag":"ACCA Printed Circuit Analog Comparator Card | PDF","alt_tag":"ACCA Printed Circuit Analog Comparator Card | PDF","created_at":null,"updated_at":null}}]},{"id":8965,"part_number":"0-52838","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Maxpak V-S USRA Spindle Drive Board","short_desc":"USRA Spindle Drive Board","content":"

0-52838 USRA Spindle Drive Board

The 0-52838 is a Reliance Electric URSA Spindle Drive Board. This component is manufactured for various Reliance drive systems. In rare cases, this component may be marked with an alternate manufacturer’s logo (ABB/Asea Brown Boveri or Baldor-Reliance) instead of Reliance. The 52838 number will still be reflected in the part id. This board is discontinued by Reliance Electric.

The 0-52838 is designed with an attached faceplate, which includes set screws to lock the board into the rack system. The faceplate has a single red LED indicator located in its top third. This is labeled “Low Torque.”

The PCB portion of the 0-52838 has eight polyester vinyl capacitors. Three of these have secondary support attachments to the board. There are ten integrated circuits. Other components include TP test points, transistors, diodes, resistors, and capacitors made from other materials. Surface wiring is used in several places. It is drilled through its surface in two corners and along the edge in two places. The board is marked in a grid pattern. It has a conductive backplane located along its rear edge.

If detailed information is needed regarding installation for this board, or if more information is desired regarding the board’s operation, please refer to publications originally provided by Reliance. This includes such things as data sheets, product manuals, or user guides.

Besides our competitive prices, AX Control offers our customers several ways to save even more money. Click on the links located on this page to find out more, or talk to our team today about selling surplus, our exchange credit program, and our excellent warranty program.

","meta_title":"Maxpak V-S USRA Spindle Drive Board","meta_description":"Maxpak V-S USRA Spindle Drive Board","keywords":"Maxpak V-S USRA Spindle Drive Board","series_page_description":"Maxpak V-S USRA Spindle Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 09:34:55","prod_pdf":[{"id":3139,"product_id":8965,"pdf_id":14289,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14289,"pdf_type_id":1,"file_name":"0-52838.pdf","title_tag":"Maxpak V-S USRA Spindle Drive Board | PDF","alt_tag":"Maxpak V-S USRA Spindle Drive Board | PDF","created_at":null,"updated_at":null}}]},{"id":16230,"part_number":"0-52839","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD TSSA","short_desc":null,"content":"

0-52839 Reliance Board TSSA

The 0-52839 is a Reliance Electric Tester board with selector switches (TSSA.) The board was manufactured for use in the company’s drive systems, most often the MakPak Plus. This board connects to the Reliance motherboard (51377-31.)

The 0-52839 has very few components on its surface. It has a connected front faceplate with two set screws to lock the board into place within the rack system. This faceplate also has a single rotary dial that connects to a potentiometer on the board’s surface just behind the faceplate. The dial can be set anywhere from zero to ten. Other components mounted into the faceplate include eight black and two white push buttons. These connect two components of different lengths located behind the faceplate. The push buttons are labeled A8, A4, A2, A1, B8, B4, B2, B1, +, and Off.

The surface of the 0-52839 circuit board is printed with a grid pattern over its surface. The rear edge extends in a tab that is covered with a conductive material. The board has a few resistors but is otherwise empty of components beyond those mentioned in the paragraph above. The rear surface is marked with several codes.

Reliance Electric publications like data sheets or manuals will provide more information on this product. Please note that, due to changes in company structure, technical support products may now be available under the names Asea Brown Boveri or Baldor-Reliance. If there are any questions regarding these publications, please talk to your AX Control representative when you place your order.

","meta_title":"RELIANCE ELECTRIC PC BOARD TSSA","meta_description":"RELIANCE ELECTRIC PC BOARD TSSA","keywords":"RELIANCE ELECTRIC, PC BOARD, TSSA","series_page_description":"RELIANCE ELECTRIC PC BOARD TSSA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-30 13:04:41","prod_pdf":[]},{"id":16312,"part_number":"0-52840","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electic PC BOARD CCCA","short_desc":"Reliance Electric PC BOARD CCCA","content":"

0-52840 CCCA board

The 0-52840, fabricated by Reliance Electric LTD for use in the company’s drives, is a CCCA board. The board is typically marked as a Reliance component, but it is possible your original component shipped from either Asea Brown Boveri or from Baldor-Reliance due to changes in the company structure. If there is any question about compatibility between your current board and our listing, please contact our team before placing your order.

The 0-52840 module includes a front faceplate with mounted components and an attached (via three screws) circuit board. The circuit board part of this module has multiple terminal pins marked off on the board’s surface by printed boxes. Each of these boxes is individually labeled by the function it represents. The board also has several capacitors, made usually of polyester vinyl or ceramic materials, resistors, diodes, and surface wiring. The rear edge extends as a conductive backplane connector. The front board edge is populated by a line of eight potentiometers that connect to faceplate components. The edges of the board are marked with hash marks labeled with letters and/or numbers.

The faceplate of the 0-52840 includes eight rotary dials and two set screws. The screws allow the board to be locked into place within a rack system. Seven of the rotary dials can be set on a range from zero to ten. The eighth board works on a +/- scale. Each dial is individually labeled.

For more information about the 0-52840, please consult publications from Reliance provided with your original hardware. This includes technical support publications like data sheets and user guides.

","meta_title":"Reliance Electic PC BOARD CCCA","meta_description":"Reliance Electic PC BOARD CCCA","keywords":"Reliance Electic PC BOARD CCCA","series_page_description":"Reliance Electic PC BOARD CCCA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-05-01 10:36:58","prod_pdf":[]},{"id":9175,"part_number":"0-52840-228","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Modified Circuit Card","short_desc":"Reliance CCC Card 0-52840-228","content":"

0-52840-228 CCC Board

The 0-52840-228 is a CCC circuit board component fabricated by Reliance Electric for use within the company’s drives. In most cases this board is manufactured by Reliance; however, it can also originate from Baldor-Reliance or from Asea Brown Boveri. The 52840-228 designator will always appear in the part id.

The board portion of the 0-52840-228 is a rectangular shaped field with an extruding tail that acts as a conductive backplane. Much of the card is taken up by brass pin components. Some of these are marked with designators (numbers or terms like jog function and feed permissive,) but others carry no reference designator. The board also has surface wiring, ceramic capacitors, disk capacitors, polyester vinyl capacitors, metal film resistors, diodes, and eight potentiometers. The potentiometers are located along the front board edge in a single line. These connect to eight dials that populate the front faceplate.

The other part of the 0-52840-228 is the faceplate component. It attaches to the circuit board using three screws. The faceplate has no other components other than the previously mentioned dials. Seven of these dials can be set on a scale from zero to ten while the last component is designed on a +/- scale.

Reliance publications like data sheets, product manuals, and user guides will provide more detailed information about the operation of the 0-52840-228. These publications will also provide information on safety and handling, along with step-by-step procedures for installation. The 0-52840-228 is a static-sensitive board. AX Control will ship this carefully boxed and wrapped in an anti-static product.

","meta_title":"Modified Circuit Card","meta_description":"Modified Circuit Card","keywords":"Modified Circuit Card","series_page_description":"Modified Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 11:36:00","prod_pdf":[{"id":3015,"product_id":9175,"pdf_id":15692,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15692,"pdf_type_id":1,"file_name":"0-52840-228.pdf","title_tag":"Modified Circuit Card","alt_tag":"Modified Circuit Card","created_at":null,"updated_at":null}}]},{"id":9174,"part_number":"0-52840-23","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric PCB Board","short_desc":"The 0-52840-23 is a CCC Board module from Reliance","content":"

0-52840-23 CCC Card module

The Reliance 0-52840-23 is a circuit board component fabricated to be used for the company’s drives. This circuit board sometimes originates from ABB/Asea Brown Boveri or from Baldor-Reliance. Its part id includes the 52840-23 number no matter which manufacturer is the source.

The 0-52840-23 is a CCC board. This module is built with a circuit board with a connected faceplate. The faceplate has a set screw located along its top and bottom edges; these screws are used to latch the board in place in a rack system. There are seven rotary dials that can be set from zero to ten mounted into the faceplate. These are labeled “IP,” “RATE,” “STAB,” “REF CAL,” “TACH CAL,” “MAX ARM VOLT,” and “FLO CUR.” There is one additional rotary dial that is labeled “ZERO” that can be adjusted as -/+ . Each of these dials connects to a potentiometer located on the rear side of the faceplate. These potentiometers are mounted to the circuit board’s front edge.

The surface of the 0-52840-23 circuit board is printed with multiple separate boxes. These are labeled such things as Current Loop, Speed Comp, Max Spd. Ref. Vol, Current Limit, and Jog Function. Each box is populated by quick-connect metal pins, by surface wiring, by metal film resistors, or by capacitors made from various materials. Reference designators mark the location for several components that are not used; these may apply to other versions of this board. There are several versions of the CCC module available. Please verify which version works best with your system before placing your order. Our team will also be happy to help with this process. More information about the 0-52840-23 can be found through Reliance data sheets or manuals.

","meta_title":"Reliance Electric PCB Board","meta_description":"Reliance Electric PCB Board","keywords":"Reliance Electric PCB Board","series_page_description":"Reliance Electric PCB Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 10:24:26","prod_pdf":[{"id":3016,"product_id":9174,"pdf_id":15693,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15693,"pdf_type_id":1,"file_name":"0-52840-23.pdf","title_tag":"Reliance Electric PCB Board","alt_tag":"Reliance Electric PCB Board","created_at":null,"updated_at":null}}]},{"id":16226,"part_number":"0-52840-376","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD","short_desc":null,"content":"

0-52840-376

The 0-52840-376 is a board component designed for use within Reliance Electric LTD drives.

The 0-52840-376 is designed as a narrow faceplate married to a circuit board. The faceplate is populated by a set screw top and bottom to lock the module in place once it is installed in a rack system, along with eight rotary dials. This includes one dial that can be set on a +/- scale and seven dials that can be set from zero to ten. The dials are labeled IP, Rate, Stab, Ref Cal, Tach Cal, Max Arm Volt, and Flo Cur. Each dial is connected to a potentiometer on the circuit board’s leading edge.

The surface of the 0-52840-376 is printed as a series of boxes. These boxes sometimes have an overall label for the components within them, and sometimes the components within the boxes are specifically labeled. Some of these labels include Jog Function, Current Limit, Current Loop, and Speed Comp. The board is populated by fields of terminal pins, along with several polyester vinyl type capacitors, metal film resistors, and surface wiring. The board has a back edge that extends in a conductive tab that functions as a backplane connector. The rear surface is imprinted with other codes and information.

For more information about how this board operates, please refer to tech support publications like data sheets and user guides. These publications may be available from their original provider, Reliance, or they may be currently available through Baldor-Reliance or from ABB (Asea Brown Boveri.)

","meta_title":"RELIANCE ELECTRIC PC BOARD","meta_description":"RELIANCE ELECTRIC PC BOARD","keywords":"RELIANCE ELECTRIC, PC BOARD","series_page_description":"RELIANCE ELECTRIC PC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-30 12:55:28","prod_pdf":[]},{"id":9171,"part_number":"0-52840-44","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CCC PC Board","short_desc":"The 0-52840-44 is a CCC card Module from Reliance Electric","content":"

0-52840-44 CCC Card Module

The 0-52840-44 is a Reliance board component fabricated to be used in the company’s various drives. In some cases, this component could originate from Baldor-Reliance or from ABB (Asea Brown Boveri.) The part number will always include the 52840-44 number, regardless of manufacturer.

The 0-52840-44 functions as a CCC Card Module. It has a narrow faceplate attached to the front edge of its board component using three screws. The faceplate includes eight rotary dials connected to potentiometers located on the board’s surface. Of these dials, seven of them can be set from zero to ten. These are labeled 1p, rate, stab, ref cal, tach cal, max arm volt, and fld cur. The remaining dial, labeled ‘zero’ moves on a +/- scale. The faceplate also includes the manufacturer’s logo and a screw at the top and bottom of the panel to lock the board into place within the rack system.

The surface of the 0-52840-44 is marked off into several individual boxes. These are labeled as, for example, Max Spd. Tach V, Overload, Current Limit, Current Loop, Jog, Function, or Major Loop Compensate. Boxes may be populated by metal film resistors, by capacitors made from polyester vinyl, ceramic material or out of other materials, or by fields of metal pin components. Surface wiring is used to connect these pins in several locations. The board’s surface is drilled in many locations within its body to allow for secondary support of larger components.

For more information regarding the operation or installation of the 0-52840-44, please refer to Reliance publications like data sheets or manuals. These publications will also provide detailed handling and safety procedures.

","meta_title":"CCC PC Board","meta_description":"CCC PC Board","keywords":"CCC PC Board","series_page_description":"CCC PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 09:51:58","prod_pdf":[{"id":3013,"product_id":9171,"pdf_id":15694,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15694,"pdf_type_id":1,"file_name":"0-52840-44.pdf","title_tag":"CCC PC Board","alt_tag":"CCC PC Board","created_at":null,"updated_at":null}}]},{"id":8966,"part_number":"0-52840-47","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit Card","short_desc":null,"content":"

0-52840-47

The 0-52840-47 is manufactured by Reliance Electric for use within the company’s drive systems. This board component usually is marked with a Reliance logo. However, in some cases, your original board could have shipped from a company other than Reliance, namely Baldor-Reliance or ABB. This is only due to changes in the company structure. If you have questions about compatibility, please reach out to our team.

The 0-52840-47 is a rectangular circuit board with an attached front faceplate. The faceplate has two set screws (top and bottom) to lock the module within the rack system after installation. The faceplate is populated by eight rotary dials that are each individually labeled. The dials connect to potentiometers located at the rear of the faceplate and that are wired into the surface of the circuit board.

Other board components include several fields of terminal pins. Pins on this board are marked off by printed, labeled fields that are responsible for various functions such as jog function, speed comp, and current loop. The board also has resistors, capacitors, diodes, and surface wiring. Larger capacitors may be secondarily supported by wires or zip ties to protect their connections to the board. The board is built with an extending back tab covered with a conductive material. For more detailed information regarding board components or board function, please refer to Reliance publications like data sheets or user guides.

AX Control carefully packs every component that leaves our warehouse. Static sensitive products like this one receive extra care and will be wrapped in an anti-static sleeve or bag before boxing.

","meta_title":"Circuit Card","meta_description":"Circuit Card","keywords":"Circuit Card","series_page_description":"Circuit Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-24 09:51:14","prod_pdf":[{"id":3138,"product_id":8966,"pdf_id":14290,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14290,"pdf_type_id":1,"file_name":"0-52840-47.pdf","title_tag":"Circuit Card | PDF","alt_tag":"Circuit Card | PDF","created_at":null,"updated_at":null}}]},{"id":9177,"part_number":"0-52840-480","revision_type_id":1,"series_id":74,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric PC Board","short_desc":"","content":null,"meta_title":"Reliance Electric PC Board","meta_description":"Reliance Electric PC Board","keywords":"Reliance Electric PC Board","series_page_description":"Reliance Electric PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3014,"product_id":9177,"pdf_id":15695,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15695,"pdf_type_id":1,"file_name":"0-52840-480.pdf","title_tag":"Reliance Electric PC Board","alt_tag":"Reliance Electric PC Board","created_at":null,"updated_at":null}}]},{"id":9176,"part_number":"0-52840-488","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Modified PC Board","short_desc":"0-52840-488 is a Modified PC Board from Reliance Electric","content":"

0-52840-488 Modified PC Board

The 0-52840-488 is a Reliance Electric circuit board fabricated for use within various drives from the company. While this circuit board is usually manufactured by Reliance, it can sometimes originate from Asea Brown Boveri or Baldor-Reliance. The 52840-488 designator will appear in the part ID. This board component has been discontinued.

The 0-52840-488 is a modified PC board. The rectangular circuit board is marked with a grid pattern and has a short extruding tail on its rear edge that acts as a conductive backplane. The board is primarily empty except for brass vertical pin connectors. Some of these connectors are labeled with designators or appear in boxes with designations. Other components on the board’s surface include capacitors made from various materials, including ceramic and polyester vinyl, resistors, and surface wires. The board also includes eight potentiometers.

The 0-52840-488 has a front faceplate. The faceplate has a set screw located on the top and bottom edge that allows technicians to lock the module into place once it is inserted into a rack system. There are eight rotary dials in the faceplate. These each connect to one of the potentiometers on the surface of the circuit board. Each dial is individually labeled.

Detailed information about the 0-52840-488 can be found through product manuals, user guides, and data sheets originally provided by Reliance Electric for ongoing technical support. The same publications will have information about installation, maintenance, and proper handling of the component. Please read and follow all safety procedures before beginning any type of work on the 0-52840-488 or its individual components.

","meta_title":"Modified PC Board","meta_description":"Modified PC Board","keywords":"Modified PC Board","series_page_description":"Modified PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 11:54:37","prod_pdf":[{"id":3012,"product_id":9176,"pdf_id":15696,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15696,"pdf_type_id":1,"file_name":"0-52840-488.pdf","title_tag":"Modified PC Board","alt_tag":"Modified PC Board","created_at":null,"updated_at":null}}]},{"id":9170,"part_number":"0-52840-57","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric PC Board","short_desc":"Reliance Electric CCC Board","content":"

0-52840-57 CCC Card

The 0-52840-57 is a board component fabricated by Reliance Electric. This circuit board is used in Reliance drive systems. While this circuit board typically originates from Reliance, in some cases, the manufacturer may be either Asea Brown Boveri or Baldor-Reliance. “52840-57” will always appear in the part id.

The 0-52840-57 is a rectangular circuit board with a conductive backplane connector and an attached faceplate. The faceplate of the 0-52840-57 has eight rotary dial components placed in its surface. These are each individually labeled. The front panel also includes two set screws, top and bottom, that lock the module into place once it is inserted into a rack system.

The board portion of the 0-52840-57 is sparsely populated with components. The board has several diodes and metal film resistors. It has two large polyester vinyl capacitors and several smaller capacitors. The rest of the board is primarily populated by brass vertical pin connectors. Some components are marked with reference designators, but others only carry their manufacturer part numbers.

Please refer to Reliance publications (manuals or user guides) for detailed information about the operation of the 0-52840-57. The same publications will have information regarding proper installation procedures, as well as handling and safety guidelines. Reliance Electric provided all original technical support for the 0-52840-57.

Located in central North Carolina, AX Control maintains our own warehouse of industrial automation parts from Eurotherm, Horner, GE, Cognex Vision, Fuji, and many other manufacturers. Most of our ‘in stock’ products will ship to you from our location the same day you place your order. Please speak to our team for more information.

","meta_title":"Reliance Electric PC Board","meta_description":"Reliance Electric PC Board","keywords":"Reliance Electric PC Board","series_page_description":"Reliance Electric PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 10:36:29","prod_pdf":[{"id":3011,"product_id":9170,"pdf_id":15697,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15697,"pdf_type_id":1,"file_name":"0-52840-57.pdf","title_tag":"Reliance Electric PC Board","alt_tag":"Reliance Electric PC Board","created_at":null,"updated_at":null}}]},{"id":8967,"part_number":"0-52840-594","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CCC Mod PC Board","short_desc":"The 0-52840-594 is a CCC Mod PC Card from Reliance","content":"

0-52840-594 CCC Mod PC Board

The 0-52840-594 is a Reliance Electric board component with an attached faceplate. This component is used within various drive systems manufactured by Reliance. Because of changes in company structure, your board may be marked as coming from Reliance, or it may be identified as being an Asea Brown Boveri component. It may also be shown as coming from Baldor-Reliance.

The 0-52840-594 functions as a CCC Mod PC board. The faceplate has eight rotary dials that may be set between zero and ten. These dials are individually labeled by their use. Each of these dials connects to a potentiometer located on the front edge of the board. A connection screw for locking the board into the rack is located at both the top and the bottom of the faceplate.

The board component portion of the 0-52840-594 is populated by various capacitors made primarily from polyester vinyl material. The board has metal film resistors and diodes. It has a field of vertical brass pins for the quick addition of components to the board. The board is marked along one edge by numbers and along a second edge by letters. A few components are labeled with reference designators, but not all. The rear edge of the board is designed as an extruding tail covered in conductive tabs. This acts as a backplane.

More information regarding the operation, maintenance or the installation of the 0-52840-594 may be accessed through Reliance publications like user guides, manuals, and data sheets. Please read and follow all safety and handling procedures as recommended by the OEM (original equipment manufacturer.)

","meta_title":"CCC Mod PC Board","meta_description":"CCC Mod PC Board","keywords":"CCC Mod PC Board","series_page_description":"CCC Mod PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 14:22:39","prod_pdf":[{"id":3009,"product_id":8967,"pdf_id":15698,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15698,"pdf_type_id":1,"file_name":"0-52840-594.pdf","title_tag":"CCC Mod PC Board","alt_tag":"CCC Mod PC Board","created_at":null,"updated_at":null}}]},{"id":9173,"part_number":"0-52840-619","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Spindle Drive Modification Board","short_desc":"Spindle Drive Modification Board from Reliance Electric","content":"

0-52840-619 Spindle Drive Modification Board

The 0-52840-619 is a Spindle Drive Modification Board manufactured by Reliance Electric. This board is designed to be used in Reliance drives. This board component can originate from Reliance Electric, from Baldor-Reliance, or from Asea Brown Boveri (ABB.) In each case, the 52840-619 number occurs in the part id.

The 0-52840-619 is a rectangular PCB with an attached faceplate. In this case, the faceplate is a narrow silver panel with two set screws for securing the module in place once it is inserted in a rack system. The front panel is populated by eight rotary dials that are each backed by a potentiometer. These dials can be individually set and adjusted. Each is labeled with the value it is responsible for.

The 0-52840-619 has a large capacitor made from polyester vinyl located on its rear edge. The board uses other capacitors made from ceramic material, including disk capacitors. Surface wiring is used in several places. The board has diodes and metal film resistors. Some components are marked with reference designators or other labeling, but other components have no labeling. Please refer to Reliance publications like product manuals or series user guides for more in-depth information on the operation of this board. The same publications will include step-by-step information regarding proper installation of the board, including handling and safety procedures and precautions.

The team at AX Control wants to exceed your expectations, not simply meet them. If you need a product that doesn’t appear on our website, please reach out to our sales team; we’ll be happy to look through our inventory for you.

","meta_title":"Spindle Drive Modification Board","meta_description":"Spindle Drive Modification Board","keywords":"Spindle Drive Modification Board","series_page_description":"Spindle Drive Modification Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 11:15:33","prod_pdf":[{"id":3010,"product_id":9173,"pdf_id":15699,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15699,"pdf_type_id":1,"file_name":"0-52840-619.pdf","title_tag":"Spindle Drive Modification Board","alt_tag":"Spindle Drive Modification Board","created_at":null,"updated_at":null}}]},{"id":9178,"part_number":"0-52840-64","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CCC Board","short_desc":"The 0-52840-64 is a Reliance CCC Board","content":"

0-52840-64 CCC Card

The 0-52840-64, which is manufactured by Reliance Electric, is comprised of a faceplate attached to a circuit board with a conductive backplane. While this board normally is marked with a Reliance logo, in some rare cases the manufacturer may be Baldor-Reliance or ABB. The board id will reflect the 52840-64 number in each of these cases.

The 0-52840-64 has a narrow faceplate attached using screws to the front edge of the circuit board. The faceplate has eight dials mounted into its surface. The bottom dial is labeled ‘zero’ and can be set on a +/- scale. The other seven dials can be set on a scale from zero to ten. These are labeled 1P/rate/stab/ref cal/tach cal/max arm volt/ flo cur. The panel also includes two screw connections to latch the component into place within the rack system.

The rear edge of the 0-52840-64 is marked with the code 801410-90A 09. It is also marked PEC 1 211. The front of the board has multiple components, including eight potentiometers that line up along the board’s front edge. These connect to the dials mounted in the faceplate. Behind these, the board is printed with various interconnected boxes. Some labels that occur within these include R05 Stab, R01 Range, R03 Lag, Current Limit, Major Loop Compensate, R04 Lead, Over Load, Seq. Delay, and Jog Function. These boxes may be populated by quick connect vertical pins, by surface wiring, by metal film resistors, or by capacitors made from various materials. There are drill points at several places within the body of the board; these are typically used for secondary support of components which may or may not be used on this version of the board. Please be aware there are multiple versions of CCC circuit board available within this board series.

","meta_title":"CCC Board","meta_description":"CCC Board","keywords":"CCC Board","series_page_description":"CCC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 10:49:35","prod_pdf":[{"id":3007,"product_id":9178,"pdf_id":15700,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15700,"pdf_type_id":1,"file_name":"0-52840-64.pdf","title_tag":"CCC Board","alt_tag":"CCC Board","created_at":null,"updated_at":null}}]},{"id":8968,"part_number":"0-52840-655","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Electric PC Board","short_desc":"The 0-52840-655 is a Reliance CCC Card","content":"

0-52840-655 CCC Card Reliance

The 0-52840-655 is a Reliance board component with attached faceplate, manufactured for use within various company drive systems. Depending on the year this board was produced it may carry the Baldor-Reliance logo or a logo from ABB.

The 0-52840-655 functions as a CCC Card. The front faceplate has eight rotary dials mounted in its surface. These are labeled, from top to bottom, as 1P, rate, stab, ref cal, tach cal, max arm volt, fld cur, and zero. The first seven of these dials can be set from zero to ten. The “zero” dial can be minimally adjusted. Each dial connects to a potentiometer located behind the faceplate on the surface of the circuit board.

The 0-52840-655 is populated by metal film resistors. It has multiple pin components placed across the board’s surface. These are labeled extensively, often boxed off and numbered in the case of the Max Spd Tach. V. pins that are also individually numbered, or individually labeled, as are the pins near the “Major Loop Compensate” label. Some of these pins are labeled fixed, fast, slow, fwd, and rev. Other labels seen on the board surface include Overload, Current Limit, Feed permissive, Speed Comp, current loop, seq. Delay, and jog function. Pins are sometimes used to connect components to the board, as is the case with one polyester vinyl capacitor. In other cases, surface wiring connects one pin to another. Other components on the board surface include metal film resistors, capacitors of various materials, and a conductive backplane.

If more information regarding the 0-52840-655 is needed, this may be found through Reliance publications like product manuals, data sheets, or series user guides. Technical support for this product was provided by Reliance.

","meta_title":"Reliance Electric PC Board","meta_description":"Reliance Electric PC Board","keywords":"Reliance Electric PC Board","series_page_description":"Reliance Electric PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 08:01:11","prod_pdf":[{"id":3008,"product_id":8968,"pdf_id":15701,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15701,"pdf_type_id":1,"file_name":"0-52840-655.pdf","title_tag":"Reliance Electric PC Board","alt_tag":"Reliance Electric PC Board","created_at":null,"updated_at":null}}]},{"id":9172,"part_number":"0-52840-70","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board","short_desc":"0-52840-70 Reliance Electric CCC Card","content":"

0-52840-70 CCC Card

The 0-52840-70 is a circuit board from Reliance for use in the company’s various drives. Depending on the year of manufacture, this board may be marked as manufactured by Reliance Electric, by Baldor-Reliance, or by Asea Brown Boveri. 52840-70 will always be a part of the part id.

The 0-52840-70 is one of several CCC boards within this board series. It has an attached front faceplate with eight rotary dials. These are labeled (top to bottom) as 1P, rate, stab, ref cal, tach cal, max arm volt, fld cur, and zero. Dials one through seven have the ability to be set on a range from zero to ten. The last dial adjusts on a +/- scale.

The 0-52840-70 has eight potentiometers lined up along its front edge. Each of these components connects to a dial in the faceplate. The board has capacitors made out of polyester vinyl and resistors made from metal film. The majority of the board is taken up by brass vertical pins. These are often located within printed boxes on the board’s surface that are labeled such things as “major loop compensate.” Other pins are individually labeled. These labels include such items as ‘current delay,’ ‘feed permissive,’ and ‘overload.’ Surface wiring is used in several locations on the board surface. The rear of the board extends in a tab that acts as a conductive backplane.

More information about this board can be found using Reliance publications like series user guides and product manuals. If detailed installation procedures are needed, please refer to these publications.

","meta_title":"PC Board","meta_description":"PC Board","keywords":"PC Board","series_page_description":"PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 10:55:42","prod_pdf":[{"id":3006,"product_id":9172,"pdf_id":15702,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15702,"pdf_type_id":1,"file_name":"0-52840-70.pdf","title_tag":"PC Board","alt_tag":"PC Board","created_at":null,"updated_at":null}}]},{"id":9094,"part_number":"0-52840-91","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Custom Component Card","short_desc":"","content":null,"meta_title":"Custom Component Card","meta_description":"Custom Component Card","keywords":"Custom Component Card","series_page_description":"Custom Component Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":3004,"product_id":9094,"pdf_id":15703,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15703,"pdf_type_id":1,"file_name":"0-52840-91.pdf","title_tag":"Custom Component Card","alt_tag":"Custom Component Card","created_at":null,"updated_at":null}}]},{"id":8969,"part_number":"0-52841","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Static Radio Board","short_desc":"The 0-52841 is a Reliance Static Ratio Detector Board","content":"

0-52841 SRDA Static Ratio Detector Module

The 0-52841 is a Reliance Electric module manufactured for use within various drive systems.

The 0-52841 functions as a Static Ratio Detector Module. This product has a wide front faceplate connected to the components two primary and one auxiliary circuit boards using screw mounts and metal frame carriers. The faceplate has an opening cut into its top half that has been labeled “diameter.” On the bottom half, the board has a toggle switch labeled “On” and “test.” Below this switch are two round openings. One of these is labeled “cal.” These openings line up with potentiometers located on the board surface.

The top board included in the 0-52841 is marked 0-54385. This board is populated with four toggle switch components, over twenty integrated circuits, a large bipolar transistor along with several smaller transistors, nine resistor network arrays, and capacitors, resistors, and diodes, including disk capacitors. The board also has several stab-on connectors and metal pins for quick connection of components. This board is connected to the bottom circuit board (marked 0-54385-1) by two metal frames. The bottom circuit board is populated by additional integrated circuits, capacitors, transistors, metal pins, resistors, and diodes. It also has several instances of surface wiring. The board partially supports the vertically mounted auxiliary board that backs to the faceplate. This board has more of the components previously mentioned and is wired into the bottom board via surface wired connections.

More information regarding the operation or installation of this board may be accessed through Reliance publications like manuals, data sheets, or user guides. Please read and follow all safety recommendations.

","meta_title":"Static Radio Board","meta_description":"Static Radio Board","keywords":"Static Radio Board","series_page_description":"Static Radio Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 13:49:06","prod_pdf":[{"id":3005,"product_id":8969,"pdf_id":15704,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15704,"pdf_type_id":1,"file_name":"0-52841.pdf","title_tag":"Static Radio Board","alt_tag":"Static Radio Board","created_at":null,"updated_at":null}}]},{"id":18480,"part_number":"0-52842","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD TWO PHASE MTR-PDCA","short_desc":null,"content":"

The 0-52842 is a Two-Phase MTR-PDCA manufactured by Reliance Electric. The 0-52842 has a front panel with a small dial marked GAIN and has a range from zero to ten. The front panel also has a two-port standard terminal block, with the openings marked 115 1 and VAC 2. The top edge of the front panel is marked PDCA and the lower edge has the part number (0-52842). The 0-52842 has two transformers. One is marked TR-12659 64977-94-R and the other marked TR-12660 64977-95-R. The transformer marked TR-12659 64977-94-R has a red wire, an orange wire, a yellow wire and a black wire coming from it. The transformer marked TR-12659 64977-94-R has a yellow wire, an orange wire, a light brown wire, a dark blue wire and a black wire coming from it. The 0-52842 has three small polypropylene capacitors and a medium polypropylene capacitor as well as four radial ceramic capacitors that are yellow. The card has a small gray variable resistor along with a handful of linear style resistors. The 0-52842 also features a few Zenner didoes. All of these components are placed at the upper edge and rear of the circuit board. The remainder of the card is bare. The 0-52842 is set up in a grid pattern and the lines are marked with letters and numbers. For additional information please refer to the data sheets and instruction manuals produced by Reliance Electric.

For a quote on the 0-52842 call or email the friendly and knowledgeable staff at AX Control.

","meta_title":"RELIANCE ELECTRIC PC BOARD TWO PHASE MTR-PDCA","meta_description":"RELIANCE ELECTRIC PC BOARD TWO PHASE MTR-PDCA","keywords":"RELIANCE ELECTRIC PC BOARD TWO PHASE MTR-PDCA","series_page_description":"RELIANCE ELECTRIC PC BOARD TWO PHASE MTR-PDCA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-23 14:10:47","prod_pdf":[]},{"id":8970,"part_number":"0-52843","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MTR Two-Phase","short_desc":"The 0-52843 is a Reliance TPMA Power Supply Board","content":"

0-52843 Reliance TPMA Power Supply Board

The 0-52843 is a printed circuit board component fabricated by Reliance Electric for use within their various drive systems. Most of the 0-52843 boards are marked with the Reliance logo; however, depending on the year of the board’s manufacture and the company structure at that time, the board may also be marked with a logo from ABB or from Baldor-Reliance. In all cases, the PCB will reflect the 52843 part number.

The 0-52843 functions as a Power Supply card. It is fronted by a wide faceplate with a two-screw terminal strip located along the bottom right edge of the panel. The terminal strip is covered by a smaller cover connected by two screws. The screws on the terminal strip are labeled 115 and VAC. These wire in to the board using two black wires connected to metal pins. Beside two screws to lock the board into place within a rack system, there are no other components on the faceplate. This part of the 0-52843 connects to the board portion using three screw connections.

The 0-52843 board is marked with a grid pattern. It is populated by a single large transformer, which is connected to the board using two screws threaded through the transformer’s metal frame. The transformer wires into the board using multiple colored surface wires. Other components on the board include transistors, integrated circuits, diodes, a potentiometer, metal film resistors, and capacitors. Capacitors on the board are made from various materials.

If more detailed information regarding the operation or installation of this board is desired, please refer to publications from Reliance Electric like data sheets, manuals, or user guides.

","meta_title":"MTR Two-Phase","meta_description":"MTR Two-Phase","keywords":"MTR Two-Phase","series_page_description":"MTR Two-Phase","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-03 13:18:54","prod_pdf":[{"id":3003,"product_id":8970,"pdf_id":15705,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15705,"pdf_type_id":1,"file_name":"0-52843.pdf","title_tag":"MTR Two-Phase","alt_tag":"MTR Two-Phase","created_at":null,"updated_at":null}}]},{"id":8971,"part_number":"0-52844-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PCMB Control Module","short_desc":"The 0-52844-1 is a PCMB Control Module from Reliance","content":"

0-52844-1 PCMB Control Module

The 0-52844-1 is a board and faceplate module fabricated by Reliance Electric. This component is designed for use within Reliance drives. Most typically this board is marked with the Reliance logo; however, in some instances, your board may originate from Baldor-Reliance or more rarely from ABB. This is due to changes in the Reliance company over time. The 52844-1 number will remain in the part number regardless of the manufacturer.

The 0-52844-1 is a PCMB Control Module. This module has been taken out of production and is no longer made. The front faceplate of this component has ten LED indicators and a single push button reset switch. The LEDs are separated as a group of six and a group of four. The faceplate also has a set screw located at its top and bottom edge. These screws keep the board locked in place when it is placed in a rack system.

The 0-52844-1 is populated by a number of different components. The surface of the PCB is printed with a grid system. One axis of this grid is marked off by fives from zero to eight. The other axis is labeled with letters. The surface of the board has three potentiometers, over twenty integrated circuits, resistors (primarily made of metal film) capacitors, diodes, and transistors. The board uses surface wires in several locations. It has a conductive backplane located along its back edge. Please use Reliance publications like user guides and manuals for more detailed information regarding the board operation and installation procedures.

","meta_title":"PCMB Control Module","meta_description":"PCMB Control Module","keywords":"PCMB Control Module","series_page_description":"PCMB Control Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 14:51:23","prod_pdf":[{"id":3137,"product_id":8971,"pdf_id":14295,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14295,"pdf_type_id":1,"file_name":"0-52844-1.pdf","title_tag":"PCMB Control Module | PDF","alt_tag":"PCMB Control Module | PDF","created_at":null,"updated_at":null}}]},{"id":16314,"part_number":"0-52845","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Control Board PC Drive","short_desc":null,"content":"

0-52845 Control Board PCIA

The 0-52845 is a board fabricated by Reliance Electric for use within the company’s drives. This circuit board is used as a Control Board.

The 0-52845 has an attached front faceplate. The faceplate is empty except for two thumbscrews that allow the board to be locked in place in the rack after installation. The board connects to the circuit board via three screw connections.

The 0-52845 is a rectangular circuit board with various components attached. This includes metal film resistors, polyester vinyl capacitors, resistor network arrays, ceramic capacitors, and diodes. The board has an extending tab on its rear edge that is covered with a conductive material; this acts as a backplane connector. The surface of the board is printed with a grid pattern. This is used in replace of reference designators.

For more detailed information regarding the installation or operation of the 0-52845, please review technical support publications that were originally provided to end users by Reliance Electric, such as data sheets or product manuals. These publications will also include detailed information regarding the proper, safe handling of this board. If you no longer have copies of these original documents, replacements may be found on manufacturer websites run by Baldor-Reliance or ABB. Or speak to our team when placing your order.

Parker, GE, and Fuji are just three of the brands we stock in our large warehouse facility, located just south of Raleigh, NC. Many of our in-stock parts can be to you within twenty-four hours. Talk to our team today for additional details.

","meta_title":"Control Board PC Drive","meta_description":"Control Board PC Drive","keywords":"Control Board PC Drive","series_page_description":"Control Board PC Drive","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-05-01 09:45:02","prod_pdf":[]},{"id":8972,"part_number":"0-52845-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Control Board PC Drive","short_desc":"The 0-52845-1 is a Reliance Electric Control Board","content":"

0-52845-1 PCIB Control Board

The 0-52845-1 is a Reliance Electric PCB fabricated by the company to fit into its various drive systems. In some cases, this circuit board may be marked with manufacturer marks from Asea Brown Boveri/ABB or from Baldor-Reliance. This will depend on the year of the board’s manufacture. The part will always reflect the 52845-1 number.

The 0-52845-1 is a Control Board. It has a narrow silver faceplate that has no components in its surface; instead, it is designed with two set screws that lock the board into place within the rack system.

The 0-52845-1 is made up of two circuit boards. This includes the motherboard (0-52845-1) and an auxiliary board (0-55322-1.) The motherboard is populated on its front edge by seven large polyester vinyl capacitors. The rest of the board has additional capacitors made from materials like ceramic and aluminum electrolytic. The board has metal film resistors and diodes and has multiple surface wired connections along its rear edge. The back edge of the board extends into a backplane. This extension is covered in conductive tabs.

The auxiliary board (0-55322-1) attached to the 0-52845-1 motherboard is populated by thirteen integrated circuits, two disk capacitors, as well as multiple diodes, metal film resistors, and capacitors made from other materials. The board is held in place to the motherboard via four screw connections. It is wired into the primary board using surface wire connections along its rear edge. Both boards are marked on their surface by a grid pattern.

If more detailed information is needed about the board’s installation procedures or about its operation, please refer to Reliance Electric data sheets, manuals, or user guides. These publications were provided by Reliance as ongoing technical support. Reliance Electric provided all technical support for the 0-52845-1 circuit board.

If you have any questions about this or any other part on our site, please contact our team--we are happy to help!

","meta_title":"Control Board PC Drive","meta_description":"Control Board PC Drive","keywords":"Control Board PC Drive","series_page_description":"Control Board PC Drive","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-02 08:14:28","prod_pdf":[{"id":3136,"product_id":8972,"pdf_id":14296,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14296,"pdf_type_id":1,"file_name":"0-52845-1.pdf","title_tag":"Control Board PC Drive | PDF","alt_tag":"Control Board PC Drive | PDF","created_at":null,"updated_at":null}}]},{"id":8973,"part_number":"0-52850","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"IRFA PC Board","short_desc":"The 0-52850 is a Reliance IRFA Ring Counter and Firing Card","content":"

0-52850 Ring Counter and Firing Card IRFA

Reliance Electric is the manufacturer for the 0-52850 IRFA printed circuit board. This board is typically marked with the Reliance Electric logo. However, your board may be marked as coming from ABB (Asea Brown Boveri) or from Baldor-Reliance, depending on the year of its manufacture. The part number should be the same.

The 0-52850 functions as a Ring Counter and Firing Card. The printed circuit board is connected to a narrow faceplate. The faceplate is designed with a single push button switch located in its bottom third. This is labeled “Test Pulse.” The faceplate also carries the component number and the Reliance logo. It has two screws to lock the board into position within the rack system.

The surface of the 0-52850 board is printed with a grid. This is marked on one axis with letters and on its other axis with numbers. The bottom edge of the board is printed with the component identification number. The board is populated with a single potentiometer, three resistor network arrays, and multiple capacitors and resistors. Resistors tend to be made of metal film, but carbon composite resistors are used. The board uses primarily ceramic capacitors, but also has capacitors made from polyester vinyl and other materials. The board has several TP test points, over twenty-five integrated circuits, and seven transistors. The back edge of the board extends into a tab that is covered with conductive material.

Information regarding the installation or operation of the board may be found through Reliance publications like manuals, data sheets, or user guides. These publications will also give the user more information regarding the safe handling of this board. As the original equipment manufacturer, Reliance Electric was responsible for its technical support.

","meta_title":"IRFA PC Board","meta_description":"IRFA PC Board","keywords":"IRFA PC Board","series_page_description":"IRFA PC Board","quote_description":null,"inventory_notes":"in box reman sticker","cross_reference":"","created_at":null,"updated_at":"2019-04-01 07:50:58","prod_pdf":[{"id":3001,"product_id":8973,"pdf_id":15706,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15706,"pdf_type_id":1,"file_name":"0-52850.pdf","title_tag":"IRFA PC Board","alt_tag":"IRFA PC Board","created_at":null,"updated_at":null}}]},{"id":18429,"part_number":"0-52851","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC SEQUENCE CARD","short_desc":null,"content":"

The 0-52851 is a Digital Sequencing card made by Reliance Electric. This particular card uses a power rack to operate. The front panel of the 0-52851 has a six-screw standard terminal box. Below this box is a green LED light labeled RUN and a red LED light, and below these is a large red button. Behind the front panel on the attached circuit board, there is a wire coming from each of the six openings from the standard terminal block that connects to a metal pin. The 0-52851 card has two large relay boxes just behind the wires. The relay boxes have Omron LZNQ4-US 24 VDC Contact Resistive 0.3A 125 VAC 1A 30 VDC Coil 24 VDC printed on the top of each; along with a diagram of how the relay looks from the bottom. The 0-52851 has two silver transistors. The 0-52851 uses thirty-one integrated circuits to store information that tells the card how to function. There are thirteen red circular varistor resistors and over twenty linear resistors that are light blue or mauve color. The 0-52851 uses nine orange radial ceramic capacitors, a yellow polypropylene capacitor, and a polystyrene capacitor. There is also a series of ten or so metal pegs across the surface of the card. The 0-52851 is eleven inches long and eight inches wide. The 0-52851 is also marked along the upper edge using numbers in increments of five starting at zero and going to eighty.

AX Control’s staff is available to assist you by phone or email.

","meta_title":"RELIANCE ELECTRIC SEQUENCE CARD","meta_description":"RELIANCE ELECTRIC SEQUENCE CARD","keywords":"RELIANCE ELECTRIC SEQUENCE CARD","series_page_description":"RELIANCE ELECTRIC SEQUENCE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-23 14:07:37","prod_pdf":[]},{"id":16313,"part_number":"0-52855","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD CVCA","short_desc":null,"content":"

0-52855 CVCA

The 0-52855 is a Reliance Electric board component fabricated for use within the company’s various drives.

The 0-52855 is a rectangular board component with an attached faceplate. The faceplate component has seven rotary dials mounted into its surface. It also has two small openings, one that allows access to a potentiometer to adjust volt gain, and a second that fronts a red LED indicator labeled F. Min. The rotary dials are labeled Current Limit, Current Gain, Volt off, Accelerate, Decelerate, Stabe, and FB Comp. Each rotary dial fastens to a potentiometer on the circuit board to the rear of the faceplate. The faceplate and circuit board connect together using screws.

The 0-52855 has nineteen integrated circuits. It also has transistors, capacitors, diodes, resistors, and two additional potentiometers. Resistors tend to be made from metal film, although some carbon composite resistors are used on the board, too. Capacitors on the board include ceramic disk and polyester vinyl capacitors as well as other types. There is a grid pattern printed across the board’s surface in place of using reference designators. The rear edge has an extended portion covered in a conductive material; this functions as a sort of backplane connector for the module.

Additional information regarding the installation of this board component may be found through Reliance user guides or product manuals. These publications were provided by Reliance with your original product, but if they are no longer available to you, replacements may be found online via ABB or Baldor-Reliance. Our team can help with this process when you place your order.

","meta_title":"RELIANCE ELECTRIC PC BOARD CVCA","meta_description":"RELIANCE ELECTRIC PC BOARD CVCA","keywords":"RELIANCE ELECTRIC PC BOARD CVCA","series_page_description":"RELIANCE ELECTRIC PC BOARD CVCA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-05-01 10:15:43","prod_pdf":[]},{"id":8974,"part_number":"0-52859-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VSDC Card Module","short_desc":"The 0-52859-2 is a Reliance Digital Voltage Source Sequence Board VSDC","content":"

0-52859-2 Digital Voltage Source Sequence Board VSDC

The 0-52859-2 is a Reliance Electric board component manufactured to be used with various Reliance drive systems. Reliance boards are sometimes marked as Baldor-Reliance or ABB (Asea Brown Boveri) depending on the year of their manufacture. The part number remains the same.

The 0-52859-2 functions as a Digital Voltage Source Sequence Board. It is connected used three screws to a front faceplate with multiple components. These include a bank of screw connections located in its bottom half, three green LED indicators, and a single red LED indicator. The red LED is labeled IET. The green LEDs are labeled Run, Fwd/Rev, and Fl. The front faceplate also has two screw connections that allow the component to lock into place within the rack system.

The board portion of the 0-52859-2 is populated with four relay components. Each of these has a relay diagram printed on its top surface. The board has twenty-two integrated circuits, including inverter chips and high-performance analog operational amplifiers. Other components include transistors, metal film resistors, diodes, ceramic capacitors, and ceramic disk capacitors. Reference designators are rarely used on this PCB; instead, the surface of the board is printed with a grid pattern across the entire surface of the board. The rear edge of the circuit board extends in a sort of tail covered in conductive tabs. This functions as a type of backplane connector.

More information regarding the operation and installation of the 0-52859-2 may be found through Reliance publications like manuals, data sheets, or user guides. Please follow all manufacturer recommended handling and safety precautions.

","meta_title":"VSDC Card Module","meta_description":"VSDC Card Module","keywords":"VSDC Card Module","series_page_description":"VSDC Card Module","quote_description":null,"inventory_notes":"used in box","cross_reference":"","created_at":null,"updated_at":"2019-04-01 08:10:41","prod_pdf":[{"id":3135,"product_id":8974,"pdf_id":14298,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14298,"pdf_type_id":1,"file_name":"0-52859-2.pdf","title_tag":"VSDC Card Module | PDF","alt_tag":"VSDC Card Module | PDF","created_at":null,"updated_at":null}}]},{"id":8975,"part_number":"0-52860-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Reliance Circuit Board","short_desc":"The 0-52860-2 is a Reliance VSAC Inverter Analog Board","content":"

0-52860-2 Inverter Analog Board VSAC

The 0-52860-2 is a Reliance board component used within the company’s various drive systems. Some of Reliance’s components may be noted as coming from Baldor-Reliance or from ABB/Asea Brown Boveri subject to the year of the component’s manufacture.

The 0-52860-2 functions as an Inverter Analog Board. It is built with a narrow front faceplate populated with eight rotary dials. Each of these dials can be set anywhere from zero to ten. These are labeled as Max Hz, Min Hz, Jog, V/Hz, Bst, Accl, Decl, and Stab. The front faceplate is also marked with the component number (board number) and with the manufacturer’s logo.

The 0-52860-2 is populated by eight potentiometers. Each of these connects to one of the rotary dials on the front faceplate. The potentiometers are located in a single line along the front edge of the PCB directly behind the faceplate. The board has nine integrated circuits, eight transistors, resistors made of carbon composite material and metal film, polyester vinyl axial capacitors, ceramic disk capacitors, and other types of capacitors, as well as TP test points, diodes, and several instances of surface wiring. The back edge of the PCB extends in a type of tail. This is covered in conductive tabs and acts as a backplane connector.

If more information is required regarding the function, operation, or installation of the 0-52860-2, this information can be found through Reliance publications like user guides, manuals, or data sheets. Reliance Electric, as the original equipment manufacturer, was responsible for providing the written technical support for this product.

Our warehouses are located in central North Carolina, just south of Raleigh. We are happy to provide your company with a shipping quote to your location upon request. We work with a number of carriers and offer everything from economical ground service to Next Day Air delivery.

","meta_title":"Reliance Circuit Board","meta_description":"Reliance Circuit Board","keywords":"Reliance Circuit Board","series_page_description":"Reliance Circuit Board","quote_description":null,"inventory_notes":"used in box","cross_reference":"","created_at":null,"updated_at":"2019-04-01 09:04:52","prod_pdf":[{"id":3133,"product_id":8975,"pdf_id":14299,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14299,"pdf_type_id":1,"file_name":"0-52860-2.pdf","title_tag":"Reliance Circuit Board | PDF","alt_tag":"Reliance Circuit Board | PDF","created_at":null,"updated_at":null}}]},{"id":8976,"part_number":"0-52861","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DC Disable DCGA Gate Driver","short_desc":"The 0-52861 is a Reliance DC Gate Drive DCGA","content":"

0-52861 DC Gate Drive DCGA

The 0-52861 is a Reliance PCB component fabricated for use within Reliance drive systems. This board component may sometimes be marked as being manufactured by ABB/Asea Brown Boveri or by Baldor Reliance. The part number is the same. Changes in manufacturer name are due to changes in Reliance company structure.

The 0-52861 functions as a DC Gate Drive board. This component includes a faceplate with two screws (top and bottom) to lock the board into place within the rack system. The faceplate has one red LED indicator that is marked “D.C. Disable.” It also has a red arrow marked “Warning” and the notation of “Check frequency jumper on VSA card at left before drive is first run.” The faceplate and the circuit board portion connect to each other using three screws.

The 0-52861 board is populated by five integrated circuits. It has fifteen polyester vinyl capacitors. This includes nine small, three medium and three large capacitors. The board also has ceramic disk capacitors, ceramic capacitors, as well as several capacitors made from other materials. Resistors are both metal film and carbon composite. The board has a single bipolar transistor fitted within a heat sink along with several smaller transistors. Surface wiring is used to wire one pole of the transistor to the board. There are TP test points located across the board’s surface. The board is marked with its component number, with a grid pattern, with letters and numbers for alignment, and has a backplane connector made from conductive tabs. More information can be found through Reliance publications like manuals, data sheets, or through series user guides.

Our team is happy to provide you with a shipping quote to your location from our warehouses located south of Raleigh, North Carolina upon request. We offer a wide variety of shipping options through a number of carriers.

","meta_title":"DC Disable DCGA Gate Driver","meta_description":"DC Disable DCGA Gate Driver","keywords":"DC Disable DCGA Gate Driver","series_page_description":"DC Disable DCGA Gate Driver","quote_description":null,"inventory_notes":"has box","cross_reference":"","created_at":null,"updated_at":"2019-04-01 09:28:01","prod_pdf":[{"id":3134,"product_id":8976,"pdf_id":14300,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14300,"pdf_type_id":1,"file_name":"0-52861.pdf","title_tag":"DC Disable DCGA Gate Driver | PDF","alt_tag":"DC Disable DCGA Gate Driver | PDF","created_at":null,"updated_at":null}}]},{"id":9179,"part_number":"0-52861-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DCGB PC Board","short_desc":"The 0-52861-1 is a DCGB Firing Circuit Board","content":"

0-52861-1 Firing Circuit Board

The 0-52861-1 is a PCB (printed circuit board) fabricated by Reliance Electric for use within the company’s various drives.

The 0-52861-1 is used as a Firing Circuit Board. This component is comprised of a printed board and an attached faceplate. The faceplate is empty besides locking set screws located at the bottom and the top of the panel. These screws are used to latch the module in position within the rack system. Set screws are normally finger tightened to prevent damage to the board or difficulty in removing the component at a later date. This panel also has a printed red “WARNING” with a left facing arrow. Underneath this is the notation to “Check frequency jumper on VSA-Card at left before drive is first run.”

The board portion of the 0-52861-1 includes a large bipolar transistor mounted on top of a heat sink. One of the poles of this component connects to a surface wire. This is mounted to the board using two screw connections. There are five smaller transistors, thirty-two integrated circuits, metal film, and carbon composite resistors, ceramic disk capacitors (about 17,) and capacitors made from other materials. ICs include OR gates, inverters, serial in/serial outs, and AND gates. Several single-pin connectors are used. The rear surface is marked with codes 802286-82A and PEC 508 852.

More information regarding the 0-52861-1 Firing Circuit PCB may be found using Reliance publications like product manuals or series user guides. The 0-52861-1 is sometimes listed as a Baldor Reliance component. It may also be listed as coming from ABB/Asea Brown Boveri.

","meta_title":"DCGB PC Board","meta_description":"DCGB PC Board","keywords":"DCGB PC Board","series_page_description":"DCGB PC Board","quote_description":null,"inventory_notes":"box stolen","cross_reference":"","created_at":null,"updated_at":"2019-04-08 11:20:52","prod_pdf":[{"id":3002,"product_id":9179,"pdf_id":15707,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15707,"pdf_type_id":1,"file_name":"0-52861-1.pdf","title_tag":"DCGB PC Board","alt_tag":"DCGB PC Board","created_at":null,"updated_at":null}}]},{"id":8977,"part_number":"0-52862","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Limit Snubber Inverter CLSA","short_desc":"The 0-52862 is a Current Limit Snubber from Reliance CLSA","content":"

0-52862 Current Limit Snubber CLSA

The 0-52862 is a board component fabricated by Reliance Electric for use within some of their various drive systems.

The 0-52862 functions as a Current Limit Snubber Card. The circuit board component is fronted by a faceplate with two set screws that lock the component into place within the rack. The faceplate has two rotary dial components located toward its bottom edge. These are marked “motor” and “regen.” Both dials can be set anywhere between zero and ten. Each of the dials connects to potentiometers located on the surface of the circuit board.

The 0-52862 is built with stab-on connectors. It has several vertical pins for wiring components directly to, rather than connecting them to the board as axial components. The board has metal film resistors and ceramic capacitors. It also has several disk capacitors. There are multiple transistors on the board’s surface of various design. The board has five integrated circuits.

The surface of the 0-52862 is printed in a grid pattern. The bottom edge carries the board identifying number. One corner is drilled. The rear edge is designed to act as a backplane connector and has a tail-like extension in its center covered in conductive tabs. Please refer to Reliance publications (manuals or data sheets) for more information regarding the operation of the board. Reliance user guides will also provide more information regarding installation and handling procedures. Reliance Electric was responsible for providing technical support for this product. Only properly trained personnel should install or maintain Reliance circuit boards.

","meta_title":"Current Limit Snubber Inverter CLSA","meta_description":"Current Limit Snubber Inverter CLSA","keywords":"Current Limit Snubber Inverter CLSA","series_page_description":"Current Limit Snubber Inverter CLSA","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 09:59:49","prod_pdf":[{"id":3132,"product_id":8977,"pdf_id":14301,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14301,"pdf_type_id":1,"file_name":"0-52862.pdf","title_tag":"Current Limit Snubber Inverter CLSA | PDF","alt_tag":"Current Limit Snubber Inverter CLSA | PDF","created_at":null,"updated_at":null}}]},{"id":9180,"part_number":"0-52862-C","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CL5A Limit Snubber PC Board","short_desc":"The 0-52862-C is a Current Limit Snubber Card CLSA from Reliance Electric","content":"

0-52862-C Current Limit Snubber Card CLSA

The 0-52862-C, which functions as a Current Limit Snubber Card, is a circuit board manufactured by Reliance Electric for use within the company’s drives.

The 0-52862-C is made up of a circuit board component attached by three screws to a front faceplate. The faceplate panel includes two set screws that help keep the module in place once it is set into a rack system. These screws are usually finger tightened to avoid over-tightening that would cause issues with removal. The faceplate panel has two rotary dials mounted into the bottom half of its length. These can be set from zero to ten, and are labeled “motor” and “regen.”

The board portion of the 0-52862-C is sparsely populated. The board includes two potentiometers that have been placed near the front board edge. These connect to the dials in the front panel. The board has eight transistors of various size and design as well as five integrated circuits. Other components include stab-on connectors, metal film resistors, and disk capacitors. There is a grid pattern printed on the front surface. The rear surface carries the codes 802286-21A 134 and 1193.

Installation and maintenance procedures, along with detailed operation information about the 0-52862-C can be found in Reliance publications. This includes manuals and user guides. Please refer to these technical support publications for safety and handling procedures.

AX Control maintains relationships with several of the world’s largest shipping carriers, including FedEX, UPS, TNT, and DHL in order to give our customers options to choose from. We will be happy to quote shipping costs before your order is placed, upon request. AX Control offers blind shipping.

","meta_title":"CL5A Limit Snubber PC Board","meta_description":"CL5A Limit Snubber PC Board","keywords":"CL5A Limit Snubber PC Board","series_page_description":"CL5A Limit Snubber PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 11:45:02","prod_pdf":[{"id":3000,"product_id":9180,"pdf_id":15708,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15708,"pdf_type_id":1,"file_name":"0-52862-C.pdf","title_tag":"CL5A Limit Snubber PC Board","alt_tag":"CL5A Limit Snubber PC Board","created_at":null,"updated_at":null}}]},{"id":18036,"part_number":"0-52874-1","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RELIANCE ELECTRIC PC BOARD V/T ANALOG BOARD","short_desc":null,"content":"

The 0-52874-1 is a PC BOARD V/T ANALOG BOARD produced by Reliance Electric. The 0-52874-1 has a front panel with eight small dials. They all have a small white arrow etched on the dial and are labeled as follows: the first is labeled Max Hz and around this dial is labeled zero, four, six, eight, and ten, the second is labeled Min Hz and around this dial is labeled zero, four, six, eight, and ten, the third is labeled PRG JOG and around this dial is labeled zero, four, six, eight, and ten, the fourth is labeled V / Hz and around this dial is labeled zero, four, six, eight, and ten, the fifth is labeled BST and around this dial is labeled zero, four, six, eight, and ten, the sixth is labeled ACCL and around this dial is labeled zero, four, six, eight, and ten, the seventh is labeled DECL and around this dial is labeled zero, four, six, eight, and ten and the eight is labeled STAB and around this dial is labeled zero, four, six, eight, and ten. The 0-52874-1’s circuit board is littered with various integrated circuits, different types of capacitors, different types of resistors, various styles of transistors, and different types of diodes. There are also metal pins around the circuit board to use as connection points for additional parts and jumper pins to direct energy flow like switches.

Reach out to AX Control to get a quote or to start the ordering process today.

","meta_title":"RELIANCE ELECTRIC PC BOARD V/T ANALOG BOARD","meta_description":"RELIANCE ELECTRIC PC BOARD V/T ANALOG BOARD","keywords":"RELIANCE ELECTRIC PC BOARD V/T ANALOG BOARD","series_page_description":"RELIANCE ELECTRIC PC BOARD V/T ANALOG BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-18 10:56:11","prod_pdf":[]},{"id":9095,"part_number":"0-54122-6","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Drive Controller Board","short_desc":"","content":null,"meta_title":"Drive Controller Board","meta_description":"Drive Controller Board","keywords":"Drive Controller Board","series_page_description":"Drive Controller Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":2998,"product_id":9095,"pdf_id":15709,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15709,"pdf_type_id":1,"file_name":"0-54122-6.pdf","title_tag":"Drive Controller Board","alt_tag":"Drive Controller Board","created_at":null,"updated_at":null}}]},{"id":8978,"part_number":"0-54200","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Driver Board","short_desc":"The 0-54200 is a Reliance I/O Driver Module","content":"

0-54200 Reliance I/O Driver Module

The 0-54200 is a PCB board component manufactured by Reliance Electric. This board is designed for use within Reliance drive systems. Some 0-54200 PCBs may be marked as originating from Asea Brown Boveri (ABB) or from Baldor-Reliance; this is the same part. The part number will be the same in these instances.

The 0-54200 functions as an I/O Driver card. It is a large circuit board without a front faceplate. The board has extraction clips attached to one edge to allow for easier insertion/extraction into a rack system. These clips give technicians a lever point to pull the board out of position when taking it out of its location, and gives them a handling point when inserting the board into a rack, thus protecting more delicate parts of the board.

The 0-54200 is marked with a grid. Most of the board’s surface is empty. The bottom edge of the board is populated with a board connector. Other components on the board’s surface include ten integrated circuits, a transistor, a ceramic capacitor, and three metal film resistors. The board is drilled at multiple points.

Reliance Electric originally provided all technical support for the 0-54200. More information about the operation or installation of this product may be found through original publications from Reliance. This includes such items as manuals or user guides. Please follow all recommended safety and handling procedures.

Our team will be happy to provide a shipping quote from our warehouse in North Carolina to your location, upon request. We ship and store all static sensitive boards in a protective anti-static wrap.

","meta_title":"Driver Board","meta_description":"Driver Board","keywords":"Driver Board","series_page_description":"Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 10:28:52","prod_pdf":[{"id":3131,"product_id":8978,"pdf_id":14302,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14302,"pdf_type_id":1,"file_name":"0-54200.pdf","title_tag":"Driver Board | PDF","alt_tag":"Driver Board | PDF","created_at":null,"updated_at":null}}]},{"id":9181,"part_number":"0-54200-1","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Remote Driver Board","short_desc":"0-54200-1 Remote Driver Board from Reliance Electric","content":"

0-54200-1 Remote Driver Board

The 0-54200-1, which is manufactured by Reliance Electric, is a Remote Driver PCB. This circuit board is designed to be used within Reliance drives, and while it usually carries the Reliance logo, in some rare cases the board may originate from either ABB or from Baldor-Reliance. In both these cases, the board’s part will still reflect the 54200-1 number.

The 0-54200-1 is a larger than average circuit board. Rather than having a front faceplate, this board has extractor clips inserted in each front corner. Extractor clips serve several purposes. When the board is being extracted from a rack system, the clips give technicians a lever point to pull the board out of place with. When the board is being inserted into a rack, these clips give technicians a point to hold the board at, which thus protects more delicate parts of the circuit board. The front edge of the 0-54200-1 steps down in its middle (as a reverse tab.)

The 0-54200-1 has very few components on its surface. Most of the upper right portion of the board is empty, with only a few single-pin connectors, metal film resistors, or transistors. The bottom left of the board has twenty-seven integrated circuits, TP test points, transistors, and resistors, and capacitors. It also has several instances of surface wiring. There is a large beige component and two large black components attached to the board (one marked 800756-6A.)

Please refer to Reliance publications like manuals or data sheets for more information. As the original equipment manufacturer, Reliance was responsible for all technical support for this product.

","meta_title":"Remote Driver Board","meta_description":"Remote Driver Board","keywords":"Remote Driver Board","series_page_description":"Remote Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-08 12:06:32","prod_pdf":[{"id":2999,"product_id":9181,"pdf_id":15710,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15710,"pdf_type_id":1,"file_name":"0-54200-1.pdf","title_tag":"Remote Driver Board","alt_tag":"Remote Driver Board","created_at":null,"updated_at":null}}]},{"id":8979,"part_number":"0-54200-2","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Control Board","short_desc":"The 0-54200-2 is a Reliance Remote Driver board","content":"

0-54200-2 Remote Driver board

The 0-54200-2 is a Reliance Electric circuit board that has been manufactured for use within the company’s drives. This component typically has a Reliance logo. In some cases, however, the board may originate from ABB or from Baldor-Reliance. The part number in each of these cases will still reflect the 54200-2 number.

The 0-54200-2 functions as a Remote Driver board. While most boards in this series have a front faceplate attached to their leading edge, this board instead has two insertion clips on its leading edge. Insertion clips give technicians a location to grasp the circuit board without fear of damaging delicate components as they are installing the board into a rack system. The clips also add a lever point to the edge of the board to allow for easier extraction when the board needs maintenance or replacement.

The 0-54200-2 is printed with a grid pattern. The top edge of this is labeled with numbers from zero to 130, jumping by fives. The other axis of the grid is labeled by two runs of letters.

The upper right portion of the 0-54200-2 is mostly empty. The bottom and left sides of the board are populated by over 25 integrated circuits, TP test points, transistors, disk capacitors, and other capacitors, along with resistors and diodes. The board uses surface wires.

More detailed information regarding the operation of the board and more information pertaining to the installation of the board may be found through manuals, data sheets, and user guides provided by Reliance Electric as ongoing technical support.

","meta_title":"Control Board","meta_description":"Control Board","keywords":"Control Board","series_page_description":"Control Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-04 15:11:57","prod_pdf":[{"id":3130,"product_id":8979,"pdf_id":14303,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14303,"pdf_type_id":1,"file_name":"0-54200-2.pdf","title_tag":"Control Board | PDF","alt_tag":"Control Board | PDF","created_at":null,"updated_at":null}}]},{"id":8980,"part_number":"0-54200-3","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"High Speed Driver Board","short_desc":"The 0-54200-3 is a Reliance High Speed Driver","content":"

0-54200-3 High-Speed Driver

The 0-54200-3 is a circuit board component fabricated by Reliance Electric. This board component is typically used within Reliance drive systems.

The 0-54200-3 functions as a High-Speed Driver board. This board does not have a front faceplate; instead, it is fitted with two extractor clips along its front edge that give technicians a place to grasp the PCB during insertion into a rack, and a lever point to pull the board out of its place within the rack system when maintenance or replacement is needed. The clips are inserted into drilled holes in the corners of the board. Other drill points are located on the other two corners of the board.

The 0-54200-3 is populated by over eighty integrated circuits, including eproms. The board has two right-angled cable connectors. Capacitors are typically made from ceramic material. Resistors on the board are usually carbon composite, but there are some metal film resistors used as well. The board has several resistor network arrays. It has over a dozen transistors; the majority of these are located in a single line near the top board edge. Surface wiring is used in multiple board locations. Most components are marked with some sort of reference designator, and some parts are marked with their manufacturer’s part number.

More information may be found through publications provided by Reliance Electric, such as data sheets or manuals. Series user guides are also helpful in providing detailed information on installation and board operation. Reliance Electric provided all technical support for the 0-54200-3.

","meta_title":"High Speed Driver Board","meta_description":"High Speed Driver Board","keywords":"High Speed Driver Board","series_page_description":"High Speed Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-01 11:00:00","prod_pdf":[{"id":2996,"product_id":8980,"pdf_id":15711,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":15711,"pdf_type_id":1,"file_name":"0-54200-3.pdf","title_tag":"High Speed Driver Board","alt_tag":"High Speed Driver Board","created_at":null,"updated_at":null}}]},{"id":8981,"part_number":"0-54200-4","revision_type_id":1,"series_id":74,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Automate Board","short_desc":null,"content":"

0-54200-4 I/O Driver Board

The 0-54200-4 is an I/O Driver Board manufactured by Reliance Electric. This board typically carries a Reliance logo and was shipped from Reliance Electric. However, it is possible that your current component originally shipped from either ABB/Asea Brown Boveri or from Baldor-Reliance. If you have any questions or concerns about compatibility with this listing, please reach out to our team.

The 0-54200-4 is a large circuit board. Unlike many in this series, it does not include a front faceplate. However, two extractor clips have been inserted in the front two factory-made drill holes. These extractors serve several purposes: not only do they give technicians a lever point to pull a board from a tight rack position, but they also provide those technicians with a safe handling point during both extraction and insertion of the board. This protects more delicate points on the board’s surface.

The 0-54200-4 is heavily populated by integrated circuits. The board has over seventy-five integrated circuits on its surface. Other board components include jumper switches, resistor network arrays, capacitors, resistors, and diodes. The board also has several transistors. There are two right-angled cable connectors placed side-by-side within a small indent in the leading edge of the board. For a more detailed description of board components, or for step-by-step instructions for the installation of this component in its proper rack/drive location, please refer to Reliance publications like manuals and user guides. Reliance Electric provided all the original technical support for boards within this series.

","meta_title":"PC Automate Board","meta_description":"PC Automate Board","keywords":"PC Automate Board","series_page_description":"PC Automate Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-24 10:11:51","prod_pdf":[{"id":3129,"product_id":8981,"pdf_id":14305,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":14305,"pdf_type_id":1,"file_name":"0-54200-4.pdf","title_tag":"PC Automate Board | PDF","alt_tag":"PC Automate Board | PDF","created_at":null,"updated_at":null}}]},{"id":9102,"part_number":"0-54201","revision_type_id":1,"series_id":74,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"AutoMate Programmable Control Processor Card","short_desc":null,"content":"

The 0-54201 is an Auto-Mate Programmable Control Processor Card manufactured by Reliance Electric. The 0-54201 is a long card with the upper edge labeled zero through one hundred and twenty-five. This edge increase by fives and has small tick marks to represent the numbers between the large printed ones. The right side is labeled using the alphabet A through Z then goes to double letters AA through AZ and the Ba through BS. The control card uses forty-two individual integrated circuits. The integrated circuits are the programable controls for this card. Each integrated circuit holds a series of programs and some of the integrated circuits can be reprogrammed if needed. The programs in these integrated circuits are then used to control the circuit board as a whole, hence the name of the card. There are twelve circular varistor resistors, and six dark colored carbon composition resistors. The card also has two transistors and a crystal oscillator. There are three connection points at the bottom edge of the card that are black. There are small metal tags around the entire circuit board, each with there own labels. Here are a few examples, 1RST (H), 3(H), 5(H), 4(H), 6(H), CLR (L), LINE (L), NO (L), TIE (L) COIL (L), NC (L), ENDPRG (L), PO (L), SPACE (L), ATIE (H), P1 (H), P2 (H),ACLR (L), and P3 (H) to name a few.

AX Control is the leader in hard to acquire automation pieces. If you have a piece you have been looking high and low for call AX Control.

","meta_title":"AutoMate Programmable Control Processor Card","meta_description":"AutoMate Programmable Control Processor Card","keywords":"AutoMate Programmable Control Processor Card","series_page_description":"AutoMate Programmable Control Processor Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-04-10 12:36:52","prod_pdf":[{"id":2997,"product_id":9102,"pdf_id":15712,"is_active":1,"created_at":n