Product Description
The 0-51476-30 module is a voltmeter circuit board that was designed and produced by Reliance Electric to be installed with their various drive systems. The 0-51476-30 voltmeter board is regularly found within our stock, so be sure to call and check on its availability if you are in need of one. Our sales representatives are able to assist you with any concerns or questions that you may have.
A voltmeter is an instrument that is meant to be used to measure the difference in electrical potential from any two points within an electric circuit. This 0-51476-30 voltmeter board is meant to fulfill that purpose within the Reliance Electric drives.
The 0-51476-30 voltmeter board is a square board which has a grid printed throughout the surface of it. The top of this grid is labeled from 0 to 25 in multiples of 5. The left side is labeled using the letters A through AA. In the top left of this grid, there is a small dial where the maximum setting is 10 and the minimum is 0. The right of the grid has a large resistor and there is a much smaller resistor below it. At the bottom of the grid, there is a large terminal block with two terminals at the top, which are labeled as “419” and “519.” Surrounding this particular terminal block, you will find four small capacitors. In the middle of the 0-51476-30 voltmeter board, there are two medium sized holes.
The 0-51476-30 voltmeter board has a total weight of 0.18 lbs. or 0.082 kg.
