0-51831-6

Product Description

The 0-51831-6 is a voltage transducer circuit board made by Reliance Electric. The circuit board has a black block on the front panel that has six circular points on it. Each circular point is labeled. The first circular port is labeled 600V, the second circular port is labeled 500V, the third circular port is labeled 240V, the fourth circular port is not labeled, the fifth circular port is labeled 1V, and the sixth circular port is labeled COM. The front panel also has two anchor points (one on the top edge and the other on the bottom edge), along with CVTG at the top and the part number (0-51831-6) along the bottom edge with the Reliance Electric company logo. The circuit board is labeled alphabetically down the edge that connects to the front panel, and numerically in intervals of five, along the top long edge. The circuit board uses a large transformer, a large blue PCB Mount Electrolytic capacitor. The circuit board also has black and silver diodes, small bead shaped diodes, variously sized resistors with striped markings and other resistors without strips. The circuit board has rectangular red capacitors along with capacitors of various sizes. The circuit board also has five wires coming from the faceplate, along with a cluster of wires in the center of the circuit board on a harness. The circuit board also has a second step on top of everything else. This shelve has four wires connected to screws and a crystal oscillator.

AX Control is available by phone or email.