About the 801466-R
Hardware Tips and Specifications
The 801466-R is a Static Trip Module produced by Reliance Electric. The 801466-R is an encased circuit board with:
- a front panel
- at the top of the panel is a small blue variable resistor
- a series of traditional (standard) style terminal blocks
- the first terminal block has two screws
- the second terminal block has four screws
- the third terminal block has four screws
- the fourth terminal block has four screws
- the fifth terminal block has four screws
801466-R AC/DC Contactor Hardware Tips
In between the first and second terminal block is another blue variable resistor. Below all of the standard terminal blocks is a white section with several components labeled STATIC TRIP. At the top of the white section is a dial labeled Trip. This dial is labeled:
- zero
- two
- four
- six
- eight
- ten
The second dial is labeled TEST / CAL. This dial is also labeled zero, two, four, six, eight, and ten around it. Below these dials are two orange buttons. The top orange button is labeled TRIP. The lower orange button is labeled RESET.
These buttons correspond with the two red LED lights below the buttons also labeled TRIPPED and RESET. If these LEDs are illuminated the corresponding orange button needs to be pressed, to turn the lights off. There is also a black rectangle on the front panels edge with twelve circular openings. Each opening is labeled with a number. AX Control’s skilled and friendly staff is standing by to assist you today.
4.93 (14)
