0-51831-1

Product Description

Reliance Electric is the maker of the 0-51831-1 Industrial Control System. The front of the device has CVTB printed across the top. Along the front in a black section bolted on with twelve holes punched into it. There are the numbers two (2), three (3), nine (9) and ten (10) printed to the left of the black section and the part number 0-51831-1 printed below the black section. The black panel has screws underneath each of the punched holes. The 0-51831-1 is a double style circuit board or one circuit board on top of the other. With this being the case only the parts on the top circuit board will be listed. Starting towards the back there are two small transformers next to two large black circular components. Each of these large circular components has a red, a green, and a yellow wire coming out of the side. There are large orange capacitors in the shapes of circles, there are also five other light orange capacitors in the shape of smaller circles. There are two pale gray variable resistors with small screws on the right side to adjust them. The 0-51831-1 features six large black capacitors and four smaller silver capacitors. Each one has how much energy it can store inscribed on the outside of it. The top circuit board for this is slightly smaller the bottom circuit board. However, all that can be seen are the bottom circuit boards edges and how it is labeled.

Email or call AX Control to order the 0-51831-1 today.