Product Description
The 0-48653-4 unit is a tachometer control circuit board that Reliance Electric designed and produced. If you are looking to purchase a 0-48653-4 board, then please be sure to contact us either over the phone or through email. We typically keep the 0-48653-4 board in stock, even though it is no longer supported or offered new through Reliance Electric. Our sales representatives can help you in determining if this product is the right one for your facility.
The 0-48653-4 board is small and has only a few parts located on its surface. At the top of the 0-48653-4 board, there is a small terminal block with four terminals on top. Below that, you will find three small resistors. The two resistors on the left are wired to metal prongs. These prongs are labeled as “A” and “B” for the resistor most on the left and “C” and “D” for the resistor to the right of that one. The resistor that is the third resistor is wired directly to the board rather than to two metal prongs. Below these three resistors, you will find a large cylindrical capacitor, which is rated as being 600 VDC and 2 μf.
The 0-48653-4 board has an approximate total weight of 0.25 lbs. or 0.11 kg. Please be aware, however, that the approximate total weight that we have provided does not serve as a reflection of any added packaging materials that we provide as a means of housing all of the shipments that go directly to our customers.
