

S-25024
- 4.92 (13)
- Click a star to rate this product
This S-25024 SVT1 Card was manufactured for Reliance Electric's Drive Boards product series.
* Learn More About Product Conditions
* Posted pricing available for website purchases only.
Product Conditions
New Surplus Factory Package: A completely unused product that is in the original factory package. The package may have been opened for the purpose of pictures, but the product has never been used or installed.
New Surplus AX Control Package: A completely unused product that has been removed from the original factory package. Often due to shelf wear or previous shipping, the factory package is not adequate and must be replaced with an ideal AX Control product package.
Reconditioned: All products that qualify as reconditioned have completed AX Control's thorough and detailed QA process and meet the requirements of excellent working condition and excellent cosmetic condition.
About the S-25024
Hardware Tips and Specifications
The S-25024 is an SVT 1 card manufactured by Reliance Electric. The front of this drive has a red LED light at the top that illuminates when the card is operation. Hence the light is labeled OPERATION. The front also features:
- five variable resistors
- each variable resistor has the markings zero through ten around it
- each variable resistor controls a different thing
- variable resistors are labeled as follows from top to bottom:
- #1 L. RATE
- #2 L. RATE
- + CORNER RATE
- - CORNER RATE
- S. D. GAIN
The connected circuit board has a sixth variable resistor near the front panel. There are nineteen transistors that are split between black and silver colors. The SVT 1 card is controlled using the seven small integrated circuits, that tell it what to do and when to do it. There are sixteen small blue radial capacitors, a small gray polypropylene capacitor, and two huge gray polypropylene capacitors. The S-25024 has over twenty tiny diodes, and about fifty resistors.
Every single piece is numbered in accordance with the type of piece it is and marked with a letter telling the engineer that it is a diode, resistor, capacitor, integrated circuit, etc. The S-25024 will also only operate when placed into a power rack and secured with the anchors on the front panel. To learn more about the S-25024 you can refer to the many data sheets and user manuals published by Reliance Electric.
AX Control can accept orders online or over the phone.
S-25024 Technical Specifications
Manufacturer | Reliance Electric |
Functional Part Number | S-25024 |
Product Description | SVT1 Card |
Part Status | Now-Obsolete Legacy |
Variable Resistors | Five |
Blue Capacitors | 16 |
Polypropylene Capacitors | 1 |
Warranty | 3 Years |
Frequently Asked Questions about S-25024
Why is this S-25024 printed circuit card considered to exist as a card rather than a board?
Has this S-25024 PCB been factory-drilled in any locations?
Reviews For S-25024
Internal Review
(5.0)This S-25024 product offering featuring heavily on this S-25024 personalized product page is somewhat mysteriously deemed as the SVT1 Card from Reliance Electric, which more likely than not indicates some other special automated assembly insertion. This S-25024 product here is a legacy series device, with its entire manufacturer eventually being discontinued overall. - AX Control Lead Technician
S-25024 Technical Specifications
Manufacturer | Reliance Electric |
Functional Part Number | S-25024 |
Product Description | SVT1 Card |
Part Status | Now-Obsolete Legacy |
Variable Resistors | Five |
Blue Capacitors | 16 |
Polypropylene Capacitors | 1 |
Warranty | 3 Years |
About the S-25024
Hardware Tips and Specifications
The S-25024 is an SVT 1 card manufactured by Reliance Electric. The front of this drive has a red LED light at the top that illuminates when the card is operation. Hence the light is labeled OPERATION. The front also features:
- five variable resistors
- each variable resistor has the markings zero through ten around it
- each variable resistor controls a different thing
- variable resistors are labeled as follows from top to bottom:
- #1 L. RATE
- #2 L. RATE
- + CORNER RATE
- - CORNER RATE
- S. D. GAIN
The connected circuit board has a sixth variable resistor near the front panel. There are nineteen transistors that are split between black and silver colors. The SVT 1 card is controlled using the seven small integrated circuits, that tell it what to do and when to do it. There are sixteen small blue radial capacitors, a small gray polypropylene capacitor, and two huge gray polypropylene capacitors. The S-25024 has over twenty tiny diodes, and about fifty resistors.
Every single piece is numbered in accordance with the type of piece it is and marked with a letter telling the engineer that it is a diode, resistor, capacitor, integrated circuit, etc. The S-25024 will also only operate when placed into a power rack and secured with the anchors on the front panel. To learn more about the S-25024 you can refer to the many data sheets and user manuals published by Reliance Electric.
AX Control can accept orders online or over the phone.
Frequently Asked Questions about S-25024
Why is this S-25024 printed circuit card considered to exist as a card rather than a board?
Has this S-25024 PCB been factory-drilled in any locations?
Reviews For S-25024
Internal Review
(5.0)This S-25024 product offering featuring heavily on this S-25024 personalized product page is somewhat mysteriously deemed as the SVT1 Card from Reliance Electric, which more likely than not indicates some other special automated assembly insertion. This S-25024 product here is a legacy series device, with its entire manufacturer eventually being discontinued overall. - AX Control Lead Technician