{"isEnabled":true,"series":{"id":53,"manufacturer_id":16,"name":"531x Boards","page_name":"531x-boards","description":"

In Stock
Ships Today
1-800-991-7026

International
1-919-372-8413

We carry a large inventory of GE Boards, PC Boards, Interface Cards, Terminal Boards, Etc. Give us a call today.

","content":null,"meta_title":"GE General Electric 531X DC300 Drive Boards Speedtronic Mark V","meta_description":"GE General Electric 531X DC300 Drive Boards Speedtronic Mark V","keywords":"GE, General Electric, 531X, DC300, Drive Boards Speedtronic Mark V","display_order":null,"is_active":1,"created_at":null,"updated_at":null,"manufacturer":{"id":16,"name":"GE Boards","page_name":"ge-boards","logo":"","description":"","content":null,"meta_title":"GE General Electric Drive and Speedtronic Mark IV Mark V Boards.","meta_description":"GE General Electric Drive and Speedtronic Mark IV Mark V Boards.","keywords":"GE, General Electric, Drive and Speedtronic, Mark IV, Mark V, Boards.","display_order":1,"is_active":1,"created_at":null,"updated_at":null},"images":[{"id":4,"series_id":53,"image_id":42468,"image_type_id":3,"name":"531X133PRUAPG1.jpg","is_active":1,"created_at":null,"updated_at":null}]},"products":[{"id":14020,"part_number":"531X100CCHAPM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VA-4 CONTROL CARD","short_desc":null,"content":"

The 531X100CCHAPM1 is a large VA-4 Control board. The 531X100CCHAPM1 is manufactured by General Electric and is meant for industrial applications. The 531X100CCHAPM1 has twenty-one Integrated Circuits. Also referred to as microchips, chip, or IC for short, these components store data. The data contained within these Integrated Circuits allows the 531X100CCHAPM1 to perform its duties. Some Integrated circuits can be programmed (EPROM) while others cannot (EEPROM). The 531X100CCHAPM1 has over one-hundred resistors. A resistors purpose is to allow for unneeded energy to escape. However, in doing so the resistors let off heat. Please consult your lead engineer to ensure the circuit board is attached to the proper power supply to prevent an overheating issue. The 531X100CCHAPM1 has over one-hundred diodes. Diodes control energy flow through them. The diode generally has a small line on either end of it. The energy will flow in the direction towards the line, however, it doesn’t flow in the opposite direction. The 531X100CCHAPM1 also has over twenty various capacitors. Capacitors (also called condensers) store an electric charge, consisting of one or more pairs of conductors separated by an insulator. This creates an electrical field that doesn’t allow any energy to unwantedly escape.

AX Control is available through email or by phone to provide more information or a price quote. Contact us today.

*General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.

**The 531X100CCHAPM1 is considered an obsolete part.

","meta_title":"GE VA-4 CONTROL CARD","meta_description":"GE VA-4 CONTROL CARD","keywords":"GE VA-4 CONTROL CARD","series_page_description":"GE VA-4 CONTROL CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 10:22:40","prod_pdf":[]},{"id":14014,"part_number":"531X100CCHARM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Control Board Module","short_desc":"The 531X100CCHARM1 is a DC-300 Control Board","content":"

531X100CCHARM1--Control Board

The 531X100CCHARM1 is a PCB (printed circuit board) fabricated by GE. This board component is designed as part of GE’s general purpose drive systems, such as the DC-300 drive. These drives were typically used to complete a wide variety of tasks within industrial settings.

The 531X100CCHARM1 functions as a Control Board. It carries codes like 4285, 004/0, 005/0, FR00/0, and the secondary board number of F31X100CCHBCG1. The board is drilled in each corner to allow for mounting options. Additional factory made holes are placed elsewhere. The 531X100CCHARM1 can accept up to two auxiliary boards. It has five male vertical pin cable connectors and two header connectors to allow for communication with auxiliaries, other boards, and off-board components.

Other components on the 531X100CCHARM1 include a push-button switch and a toggle switch, five potentiometers, transistors, over twenty jumper switches, and a single green LED indicator. The board has over twenty integrated circuits designed for various operations; these are typically marked with their original part numbers for quick identification. The board uses diodes, capacitors made of polyester vinyl, electrolytic material, and ceramic, resistors of metal film, and a resistor network array.

More information regarding the 531X100CCHARM1 may be found through publications originally provided by General Electric. This includes data sheets, series guides, or drive manuals. Detailed installation procedures for this board will be available through these sources. Only qualified technicians should install or maintain this equipment. Please follow all handling and safety procedures as recommended by the original equipment manufacturer.

","meta_title":"Control Board Module","meta_description":"Control Board Module","keywords":"Control Board Module","series_page_description":"Control Board Module","quote_description":null,"inventory_notes":"","cross_reference":"f31x100cchbcg1","created_at":null,"updated_at":"2019-03-13 08:29:05","prod_pdf":[{"id":1906,"product_id":14014,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14015,"part_number":"531X100CCHBCG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"12MHZ Control Card Module","short_desc":null,"content":"

The 531X100CCHBCG1 is a large 12 MHZ Control board. The 531X100CCHBCG1 is manufactured by General Electric for industrial purposes. The 531X100CCHBCG1 has over one-hundred resistors. Please seek the help of an experienced engineer with determining how much energy each resistor can disperse and the proper connection point and power supply for this circuit board to prevent overheating issues. The 531X100CCHBCG1 has over one-hundred diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X100CCHBCG1 also has over twenty various capacitors. Capacitors are also referred to as condensers and are used to store an electric charge in an electrical field. Ideally, the capacitors do not allow any energy to escape during this process, making it easy to reuse the energy that is stored. The 531X100CCHBCG1 has twenty-one Integrated Circuits. Integrated Circuits are the control centers of the circuit board and store the programs for the 531X100CCHBCG1 to function accurately. The Integrated Circuits go by a couple of other names such as IC, chip or microchip. These can be found in many everyday items such as cell phones and other household appliances and are not strictly for industrial use. The 531X100CCHBCG1 is considered an outdated circuit board. AX Control deals in hard to find and outdated parts.

Call or email the staff AX Control today for more information. We strive to be the first choice for all your Automation needs.

","meta_title":"12MHZ Control Card Module","meta_description":"12MHZ Control Card Module","keywords":"12MHZ Control Card Module","series_page_description":"12MHZ Control Card Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 08:14:46","prod_pdf":[{"id":1904,"product_id":14015,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14016,"part_number":"531X102CCHAEM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL BOARD","short_desc":"The 531X102CCHAEM1 is a GE CONTROL BOARD","content":"

The 531X102CCHAEM1 is a board component for GE drives and industrial systems for industrial applications. GE has produced a wide variety of drive and drive components over several decades.

The 531X102CCHAEM1 has standoffs to allow for the addition of two auxiliary boards. These stand offs are connected to the board near two vertical pin connectors, which facilitate communication between these auxiliary boards, when installed, and the motherboard. The motherboard has an additional four vertical pin connectors and two vertical pin headers. The board has over fifteen jumper switches and several transistors. Transistors are placed around the surface of the board.

The 531X102CCHAEM1 has a total of eight potentiometers located on the board. Six of these are placed on the board in a vertical position. The last two potentiometers are placed side-by-side, standing, near one corner of the board. The board has a large number of capacitors typically made of polyester vinyl, although a few capacitors are made of electrolytic material. It is populated by resistors and by over 35 resistor network arrays. The board also has multiple inductors. Integrated circuits located on the board include oscillating chips, octal bus transceivers, and quad 2-input OR gates. The board has six LED indicators. Each of these LEDs is red and is individually labeled.

The 531X102CCHAEM1 is factory drilled in each corner for mounting options. The board is marked with codes like VA-4, VDC, FR00/0, and F31X102CCHCBG1. More information on this board, handling instructions, and installation procedures may be found in user guides and data sheets that reference the part number.

","meta_title":"GE CONTROL BOARD","meta_description":"GE CONTROL BOARD","keywords":"GE CONTROL BOARD","series_page_description":"GE CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-18 16:37:45","prod_pdf":[]},{"id":14017,"part_number":"531X102CCHAFM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BOARD","short_desc":null,"content":"

The 531X102CCHAFM2 is a large circuit board. The 531X102CCHAFM2 is manufactured by General Electric. The 531X102CCHAFM2 has over one-hundred resistors. Some of these resistors do have multiple colored bands on them. The bands on the resistors correspond with a color code. Each colored band corresponds with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The 531X102CCHAFM2 also has seven Variable Resistors that can adjust the amount of energy flowing through them by turning a knob or a screw on the device. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The 531X102CCHAFM2 has over one-hundred diodes. The 531X102CCHAFM2 also has over fifty various capacitors. The 531X102CCHAFM2 has thirty-five Integrated Circuits. Integrated Circuits are the brains of the circuit board. They hold all the programming and data for the circuit board to function. There are six male terminal ports that connect the 531X102CCHAFM2 to surrounding circuit boards, generally using a ribbon harness. The 531X102CCHAFM2 does have four metal posts to hold up a daughter board.

The 531X102CCHAFM2 is one of many General Electric circuit boards that AX Control has to offer.

Call AX Control today for more information or for a quote.

","meta_title":"GENERAL ELECTRIC BOARD","meta_description":"GENERAL ELECTRIC BOARD","keywords":"GENERAL ELECTRIC BOARD","series_page_description":"GENERAL ELECTRIC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 13:27:00","prod_pdf":[]},{"id":14018,"part_number":"531X102CCHAHM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Industrial Control Board","short_desc":null,"content":"

The 531X102CCHAHM2 is a large circuit board. The 531X102CCHAHM2 is manufactured by General Electric. The 531X102CCHAHM2 has over one-hundred diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X102CCHAHM2 also has six red LEDs which emit light as current flows through them. The 531X102CCHAHM2 also has over sixty various capacitors. Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X102CCHAHM2 has thirty-five Integrated Circuits. Integrated Circuits are the brains of the circuit board. They hold all the programming and data for the circuit board to function. The Integrated Circuits are split into two groups called EPROM and EEPROM. Both groups hold the programming data the only difference it the EPROM can be programmed with new data when it becomes available while the EEPROM cannot. There are seven male terminal ports that connect the 531X102CCHAHM2 to surrounding circuit boards. The 531X102CCHAHM2 has over one-hundred resistors. Some of these resistors do have multiple colored bands on them. The bands on the resistors correspond with a color code. Each colored band corresponds with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses.

Call AX Control today for more information.

","meta_title":"Industrial Control Board","meta_description":"Industrial Control Board","keywords":"Industrial Control Board","series_page_description":"Industrial Control Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:24:50","prod_pdf":[{"id":1903,"product_id":14018,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14019,"part_number":"531X102CCHAJM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PREC CTRL CARD","short_desc":null,"content":"

The 531X102CCHAJM2 is a large circuit board. The 531X102CCHAJM2 is manufactured by General Electric. General Electric is a large contender in the industrial world and the original companies have been around since 1876 (Thomas Edison laboratory) and 1879 (Thomas-Houston Electric Company). General Electric was created by the merger of Edison General Electric and Thomas-Houston in 1892. The 531X102CCHAJM2 also has six red LEDs which emit light as current flows through them. The 531X102CCHAJM2 also has over seventy various types of capacitors*. Each capacitor creates an individual electrical field to house energy. The 531X102CCHAJM2 has thirty-six Integrated Circuits*. Integrated Circuits are the intelligence center of the circuit board. There are seven male terminal ports that connect the 531X102CCHAJM2 to surrounding circuit boards using wiring harnesses. The 531X102CCHAJM2 has over one-hundred resistors. The purpose of resistors is to get rid of unwanted energy. In doing this the resistors give off heat. Be cautious of attaching the 531X102CCHAJM2 to a power source that is too high this can result in damage to the resistors and the circuit board as a whole*. The 531X102CCHAJM2 has over one-hundred diodes. The diode is the check valve or one-way street on the circuit board. Allowing the energy to only go in a single direction.

Call or email AX Control today for more information.

*Capacitors are also called Condensers

*Integrated Circuits are also called Microchips, chips, or IC

","meta_title":"PREC CTRL CARD","meta_description":"PREC CTRL CARD","keywords":"PREC CTRL CARD","series_page_description":"PREC CTRL CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 10:53:58","prod_pdf":[]},{"id":14021,"part_number":"531X111PSHAAG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"General Electric Power Supply.","short_desc":"General Electric 531X111PSHAAG2 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHAAG2 board was developed by General Electric to function as a motor field control and power supply board. Because of its placement in the 531X series, this card can be installed into a number of older model drives across the GE brand. The required power supply for drive operation is furnished by this card. As it was developed as a G2 version, this board is best suited for installation in external exciters.

531X111PSHAAG2 is capable of producing three different voltage supplies for the drive to draw from. These rated supplies include 5 VDC, 15 VDC, and 24 VDC. A pulse transformer integrated onto the board also provides the supply needed to power the motor field circuits in the host drive. System calibrations and drive control options can be executed with this card. System control options can be executed using one of the three onboard relays. The relays are named on the card as K1, for RUN, K2, for MAX, and K3, for FAULT. There are also five jumpers and three potentiometers built into the board. The jumpers are used for current and feedback signal adjustments while the potentiometers are used for circuit and current feedback calibrations.

Be sure to review the installation parameters provided by General Electric before beginning board installation. Device protection is reliant on only permitting qualified users to handle and install this card. A comprehensive wiring guide for the 531X111PSHAAG2 power supply board can be found in the board’s manual and datasheet. General Electric, the device’s manufacturer, was the original technical support provider for the board.

Our trusted team at AX Control is happy to speak with you via phone or email for all of your automation needs. Pricing information is available for the 531X111PSHAAG2 card, or any other part or repair, by contacting our office.

","meta_title":"General Electric Power Supply.","meta_description":"General Electric Power Supply.","keywords":"General Electric Power Supply.","series_page_description":"General Electric Power Supply.","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1902,"product_id":14021,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14022,"part_number":"531X111PSHABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Supply Board by General Electric","short_desc":"General Electric 531X111PSHABG1 Motor Field Control and Power Supply Board 531X Series","content":"

When installed in a drive, the 531X111PSHABG1 card functions as a motor field control and power supply board. This device was originally manufactured by General Electric for their 531X series of replacement boards. Cards developed for this series are suitable for installation into a number of GE brand drives or exciters. When the board is installed it provides the necessary power supplies required by the drive. This specific unit is a G1 version of the board, with AC line MOVs mounted to the board itself.

The main function of the 531X111PSHABG1 card is to provide power supplies necessary for the drive to function. From this card, drives can draw rated voltages of 5 VDC, 15 VDC, and 24 VDC. A supply is also furnished for the drive’s motor field circuit using a board integrated pulse transformer. This card also features a number of onboard options to enhance the user experience. There are three relays built into the board for execution of system control options. Five jumpers are also available for users to adjust and fix feedback and current signals. The board is completed with three potentiometers. These allow users to calibrate and adjust current and circuit feedbacks as needed.

Review all provided installation parameters before beginning to install the board into the drive. Any risk of damage or defect to the device is reduced when these guides are met. Device integrity is reliant on qualified personnel being permitted to handle and install these cards. Instructions on wiring the 531X111PSHABG1 power supply board are available in the series manual as well as the device datasheet. Technical support for this board was originally provided by the manufacturer, General Electric.

Our trusted sales staff at AX Control is happy to help with all of your automation needs. To receive pricing and other information regarding the 531X111PSHABG1 board, or any other part or repair, please contact our team by phone or email.

","meta_title":"Power Supply Board by General Electric","meta_description":"Power Supply Board by General Electric","keywords":"Power Supply Board by General Electric","series_page_description":"Power Supply Board by General Electric","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1900,"product_id":14022,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14023,"part_number":"531X111PSHACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Supply Unit Obsolete","short_desc":"General Electric 531X111PSHACG1 Motor Field Control and Power Supply Board 531X Series","content":"

When operating within a host drive, the 531X111PSHACG1 board is designed to function as a motor field control and power supply card. General Electric developed the board to be a member of the 531X series of replacement drive and exciter cards. Since the device is a replacement card, it has the functionality to be installed into a number of drives and exciters across the GE brand. The power supplies required by the drive for operation are furnished with this card. As an older model G1 board, this card includes MOVs for the AC line that are mounted on the card, rather than externally.

An integral feature of the 531X111PSHACG1 board is the production of sourced power supplies. The host drive can draw from supplies rated at 5 VDC, 15 VDC, and 24 VDC using this board. An integrated pulse transformer also furnishes supplies needed to energize the motor field control circuits of the drive. An array of onboard adjustments are available for users to configure as required. System control options can be executed using one of the six relays found on the card. The board is also comprised of five jumpers and three potentiometers. Feedback and current signal adjustment is conducted using the jumpers while the potentiometers allow for current and circuit feedback calibration.

Any provided installation parameters must be reviewed prior to installing the 531X111PSHACG1 power supply board. These manufacturer provided guidelines will help to reduce any risk of damages to the drive board. As it requires careful installation, only qualified personnel should be permitted to handle and instal this card. For a complete guide to wiring the board, please refer to the device’s manual as well as its datasheet. General Electric, the device’s manufacturer, was the original provider of technical support for this board.

Our knowledgeable sales team at AX Control is always available to speak with you via phone or email about all of your automation needs. Please contact our office to receive pricing and other information regarding the 531X111PSHACG1 board, or any other part or repair.

","meta_title":"Power Supply Unit Obsolete","meta_description":"Power Supply Unit Obsolete","keywords":"Power Supply Unit Obsolete","series_page_description":"Power Supply Unit Obsolete","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1901,"product_id":14023,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14024,"part_number":"531X111PSHACG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Industrial Power Supply PC","short_desc":"General Electric 531X111PSHACG2 Motor Field Control and Power Supply Board 531X Series","content":"

General Electric developed the 531X111PSHACG2 card to function as a motor field control and power supply board when installed in a drive. The card was manufactured as a member of the 531X series of replacement boards. An array of drives from across the GE brand are designed to have this board be installed in its cabinet. When installed in a drive system, this board provides the necessary power required by the drive. This specific board was developed as a G2 version, the card was developed to operate within an external exciter rather than a drive.

Three voltages are produced when this card is installed into a drive. The host can source outputs rated at 5 VDC, 15 VDC, and 24 VDC. Supplies required by the drive’s motor field control circuits are also provided via the integrated pulse transformer. The board includes a number of adjustable features that can be configured depending on user need. Six relays provide areas for system control option execution. The 531X111PSHACG2 card also consists of five jumpers and three potentiometers. The jumpers can adjust current and feedback signals while the potentiometers can calibrate circuit and current feedbacks.

Device installation must occur only after all provided installation parameters have been reviewed. By adhering to these guidelines, the risk of damage to the device is lessened. Only qualified personnel who are trained to handle drive and exciter boards should be permitted to install this card. Be sure to refer to the device’s manual and datasheet for an overarching guide to wiring and installing the 531X111PSHACG2 card. Originally, technical support for this device was provided by General Electric, the board’s manufacturer.

AX Control’s trusted sales team is happy to speak with you via phone or email about all of your automation needs. Our staff can provide pricing and other information for the 531X111PSHACG2 board, as well as any other part or repair.

","meta_title":"Industrial Power Supply PC","meta_description":"Industrial Power Supply PC","keywords":"Industrial Power Supply PC","series_page_description":"Industrial Power Supply PC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1899,"product_id":14024,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14025,"part_number":"531X111PSHAEG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC POWER SUPPLY CARD","short_desc":"General Electric 531X111PSHAEG1 Motor Field Control and Power Supply Board 531X Series","content":"

Installing the General Electric 531X111PSHAEG1 board provides the host drive with a motor field control and power supply card. When the card was manufactured it was developed for the 531X series of replacement drive cards. Older drives across the GE family are equipped to have this card installed within the device cabinet. The host drive’s required power supply is furnished by this board when installed. Configurations of the board classify it as a G1 board with MOV’s for the AC line being mounted on the board rather than externally.

Power supplies required by the host drive are furnished with the 531X111PSHAEG1 motor field control and power supply board. Voltages rated at 5 VDC, 15 VDC, and 24 VDC can be sourced and drawn from this card. Additionally, the integrated pulse transformer on the card provides the energy required to power the host’s motor field circuitry. A number of onboard options provide configurable functions to the user. System control options are executed by the three relays found on board. Additionally, the card includes five jumpers and three potentiometers. The jumpers allows users to adjust and fix feedback and current signals. Current and circuit feedbacks can be calibrated using the potentiometers.

Provided installation parameters should be reviewed by the user before handling the board. When shipped from our team, installation lubricants and static reducing wristbands are included. The 531X111PSHAEG1 card should only be handled and installed by qualified personnel. A complete wiring and installation guide is available in the device’s datasheet and manual. The manufacturer, General Electric, originally provided technical support for all members of the 531X series.

Our staff at AX Control is available to speak with you over the phone or by email about all of your automation needs. Please contact a member of our sales team to receive pricing and availability for the 531X111PSHAEG1 board, or any other part or repair.

","meta_title":"MFC POWER SUPPLY CARD","meta_description":"MFC POWER SUPPLY CARD","keywords":"MFC POWER SUPPLY CARD","series_page_description":"MFC POWER SUPPLY CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14026,"part_number":"531X111PSHAEH1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC POWER SUPPLY BOARD VA-4","short_desc":"General Electric 531X111PSHAEH1 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHAEH1 board provides motor field control and power supply options to its installed host drive. When originally manufactured, the card was developed by General Electric for the 531X replacement drive board series. A number of older model and obsolete GE drive systems have the proper equipment to accept this card. When installed the card provides its host drive with the power supplies needed by the drive for proper function. The card follows configurations for the G1 version of the card, with AC line MOVs found on the board rather than being mounted externally.

Installing the board provides the host drive with the power supplies necessary for proper device function. Sources rated at 5 VDC, 15 VDC, and 24 VDC can be produced by the 531X111PSHAEH1 power supply board. Drives are also provided with the power needed to excite the motor field control circuits. This source is available using the drive’s integrated pulse transformer. Other features found on the board allow users to configure outputs based on system requirements. To execute system control options, users can utilize the three relays found on board. The board is completed with three potentiometers and five jumpers. Adjustments to the feedback and current signals are performed by the jumpers while calibrating the current and circuit feedbacks is performed by the potentiometers.

Before handling the board be sure to review all manufacturer provided installation parameters. When the device is shipped from our office, a metal lubricant and an attachable static reducing wrist band are included with the board. Only permit qualified personnel to remove the board from the static shield bag. Refer to the corresponding device manual and datasheet for a complete guide to wiring and installing the 531X111PSHAEH1 power supply board. As a member of the 531X series, this card was provided with technical support by General Electric.

Please contact a member of AX Control’s trusted sales team for all of your automation needs. Our staff can provide pricing and availability information for the 531X111PSHAEH1 as well as any other required part or repair.

","meta_title":"MFC POWER SUPPLY BOARD VA-6","meta_description":"MFC POWER SUPPLY BOARD VA-7","keywords":"MFC POWER SUPPLY BOARD VA-8","series_page_description":"MFC POWER SUPPLY BOARD VA-4","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14027,"part_number":"531X111PSHAFG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC POWER SUPPLY VA-4 BOARD","short_desc":"General Electric 531X111PSHAFG2 Motor Field Control and Power Supply Board 531X Series","content":"

When General Electric developed the 531X111PSHAFG2 card, it was manufactured to operate as a motor field control and power supply board. GE housed the card in the 531X series, marking it as a replacement drive board. When the card is installed into a drive cabinet, it provides the required voltages needed for proper drive function. As a G2 variation of the power supply card, this unit was specifically designed to operate within an external exciter.

Installing the 531X111PSHAFG2 card provides sourced outputs rated at 5 VDC, 15 VDC, and 24 VDC to the host drive. Outputs are also provided by the board’s pulse transformer to power the drive’s motor field control circuits. Users can configure the board to operate within specific standards required by the load. Five jumpers and three potentiometers are found on the card for feedback and current adjustments and calibrations. The card also features seven integrated relays on board. These can be used for executing system control features of the drive.

When shipped from our facility the board will be protected in a static resistant plastic bag. Before removing the board, review any installation parameters provided by the manufacturer. Only qualified personnel should remove the board and install it in the drive cabinet. A comprehensive wiring guide for the 531X111PSHAFG2 board can be found in the series manual as well as the device datasheet. When first produced, technical support for the entire 531X series was originally provided by the manufacturer.

Our trusted sales staff at AX Control can be reached by phone or email for all of your automation needs. Please contact a member of our team to receive pricing and availability on this and all other parts and repairs.

","meta_title":"MFC POWER SUPPLY VA-4 BOARD","meta_description":"MFC POWER SUPPLY VA-4 BOARD","keywords":"MFC POWER SUPPLY VA-4 BOARD","series_page_description":"MFC POWER SUPPLY VA-4 BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14028,"part_number":"531X111PSHAGG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Drive Board manufactured by GE","short_desc":"General Electric 531X111PSHAGG1 Motor Field Control and Power Supply Board 531X Series","content":"

General Electric developed the 531X111PSHAGG1 as a member of the 531X series of replacement drive boards. This card is developed function as a motor field control and power supply board. Many older model GE drives and exciters can have this board installed in its drive cabinet. The necessary power supplies needed for proper drive function are provided to the host from this board. Configurations of the card are consistent with the G1 version, with AC line MOVs mounted on the board rather than externally.

531X111PSHAGG1 is capable of producing voltages rated at 5 VDC, 15 VDC, and 24 VDC. The card also supplies the drive’s motor field control with the required voltage necessary to energize the circuit. These sources are provided by the integrated pulse transformer. Users can configure a number of onboard features to fit most load needs. Three onboard relays allow for system control options to be executed using the board. Three potentiometers and five jumpers are also furnished by the card. Calibrations to the current and circuit feedbacks is performed by the potentiometers. The jumpers are provided to adjust and fix current and feedback signals.

When shipped from our office, the 531X111PSHAGG1 power supply board will be wrapped in a protective static repellent plastic. To reduce the risk of damage to the device only remove from the packaging after reviewing the manufacturer outlined installation parameters. The series manual as well as the board’s datasheet contains a complete guide to wiring and installing the board. General Electric originally provided technical support to all members of the 531X series.

The trained sales team at AX Control is available to speak with you via phone or email about all of your automation needs. Our staff can provide pricing and other information for the 531X111PSHAGG1, or any other needed part or repair.

","meta_title":"PC Drive Board manufactured by GE","meta_description":"PC Drive Board manufactured by GE","keywords":"PC Drive Board manufactured by GE","series_page_description":"PC Drive Board manufactured by GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1897,"product_id":14028,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14029,"part_number":"531X111PSHAJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC Power Supply Board","short_desc":"General Electric 531X111PSHAJG1 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHAJG1 board was designed by General Electric as a 531X replacement drive board. When installed in a host drive the card functions as a motor field control and power supply board. Cards like this can be installed in a number of drive cabinets across the GE brand. Required power supplies for the host are provided by this board. The board is built as a G1 version, with the MOVs for the AC line mounted onboard rather than externally.

Voltages rated at 5 VDC, 15 VDC, and 24 VDC are all provided by the 531X111PSHAJG1 power supply board. It also features the energy required to energize the drive’s motor field control circuits. This source is supplied to the drive by an integrated pulse transformer. A number of calibrations and adjustments are available for users to accommodate a range of job loads. System control options can be executed by the board’s three relays. Three potentiometers are also included to perform necessary calibrations to the current and circuit feedbacks. Five jumpers complete the board and provide users access to adjust and fix onboard feedback and current signals.

Items shipped from AX Control are standard wrapped in a static reducing plastic covering. Users must thoroughly review all installation parameters outlined by the manufacturer before removing the 531X111PSHAJG1 board. A guide to wiring and installing this card is available in the series manual as well as the device datasheet. All members of the 531X series were provided with technical support by General Electric.

AX Control’s trusted sales staff is available to speak with you about all of your automation needs. Pricing information for the 531X111PSHAJG1, as well as any other needed part or repair, can be obtained by calling or emailing our team.

","meta_title":"MFC Power Supply Board","meta_description":"MFC Power Supply Board","keywords":"MFC Power Supply Board","series_page_description":"MFC Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1898,"product_id":14029,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14030,"part_number":"531X111PSHAJG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DC300 Power Supply Card","short_desc":"General Electric 531X111PSHAJG2 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHAJG2 card is a motor field control and power supply board originally manufactured by General Electric. The part is a member of the 531X family, making it a replacement drive board that can be installed in drives across the GE brand. Voltages required for drive operation are provided by installing this card in the drive cabinet. This card was designed as a G2 version of the card, allowing for installation in external exciters.

Sourced outputs rated at 5 VDC, 15 VDC, and 24 VDC are all produced by the 531X111PSHAJG2 power supply board. The card can also provide an output via the integrated pulse transformer that can energize the drive’s motor field control circuitry. Features of the board allow for users to easily configure settings for specific operating standards. Onboard, the card includes three potentiometers and five jumpers. Calibrations and adjustments regarding board feedback and current signals can be performed with these. The card also features seven relay positions used for execution of the drive’s system control options.

Our office ships the 531X111PSHAJG2 power supply board in a protective static resistant bag. Before beginning installation of the board, review the instruction parameters outlined by the manufacturer. The card should only be installed by trained personnel qualified to handle drive boards. When installing the board, review the series manual and device datasheet for a comprehensive wiring guide. Members of the 531X series were originally provided with technical support by General Electric.

AX Control’s trusted and knowledgeable sales team is happy to help with all of your 531X111PSHAJG2 needs. Please contact our office by phone or email to receive current pricing information on all parts and repairs.

","meta_title":"DC300 Power Supply Card","meta_description":"DC300 Power Supply Card","keywords":"DC300 Power Supply Card","series_page_description":"DC300 Power Supply Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1896,"product_id":14030,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14031,"part_number":"531X111PSHAJG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Supply Module. Call Now!","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAJG3","content":"

The GE Terminal Board Relay Card 531X111PSHAJG3 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHAJG3 features a 3TB Potted MOV assembly that you can replace as part of the board replacement procedure. First replace the GE Terminal Board Relay Card 531X111PSHAJG3, then replace the 3TB Potted MOV assembly.

The 3TB assembly contains a ribbon cable that you must move from the original assembly to the new assembly. Place one hand on the connector of the ribbon cable and place the other hand on the connector on the board. Pull the connectors apart. Damage can occur if you hold the ribbon cable by the cable to pull them apart.

Five mounting screws secure the assembly to the mounting surface. Use a screwdriver to remove the five screws and put them aside for future use. Also remove the four support posts located on the mounting surface. You can use a short screwdriver to perform this procedure.

Mark four holes for the placement of the assembly and use a drill to make the holes. Care must be taken to make sure that debris from the drilling does not fall on the 3TB or other components of the drive. When you complete the procedure, use a vacuum to clean all surfaces and components of metal shavings, dust, and drill chips. The debris might damage components when you apply power to the drive.

","meta_title":"Power Supply Module. Call Now!","meta_description":"Power Supply Module. Call Now!","keywords":"Power Supply Module. Call Now!","series_page_description":"Power Supply Module. Call Now!","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1895,"product_id":14031,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14032,"part_number":"531X111PSHAKG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-5 POWER SUPPLY MFC BOARD GE","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAKG1","content":"

The GE Terminal Board Relay Card 531X111PSHAKG1 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. When you replace the GE Terminal Board Relay Card 531X111PSHAKG1, the procedure might include the additional replacement of the 3TB potted MOV assembly. There are several considerations you must be aware of before you begin the replacement.

The 3TB contains multiple ribbon cables that you must disconnect from the original 3TB. The ribbon cables are prone to breakage due to the fine wires that comprise the ribbon cables. And pulling the ribbon cable out of the connector by holding the ribbon cable can lead to damaging the cable and disconnecting the fine wires. The best practice for removing the ribbon cables is to grasp the connector on the ribbon cable with one hand. Grasp the connector on the 3TB with the other hand and pull the ribbon cable from the 3TB.

The next step is to remove the five mounting screws that secure the 3TB. Have a screwdriver on hand to perform this operation.

Consider that you must drill holes in the 3TB mounting surface and this might lead to drill chips and other debris lodging in the 3TB or other components of the drive. Care must be taken that you inspect the drive and the 3TB assembly for loose debris. The debris might cause an electric shock or bind moving parts of the drive.

","meta_title":"VA-5 POWER SUPPLY MFC BOARD GE","meta_description":"VA-5 POWER SUPPLY MFC BOARD GE","keywords":"VA-5 POWER SUPPLY MFC BOARD GE","series_page_description":"VA-5 POWER SUPPLY MFC BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14033,"part_number":"531X111PSHAKG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Fanuc Power Supply Unit","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAKG2","content":"

The GE Terminal Board Relay Card 531X111PSHAKG2 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHAKG2 contains several jumpers that you can set to configure the board to behave as required in the drive. The jumpers enable you to select the field current feedback signal, and the calibrate the armature current feedback signal. You can also select to suppress the K2 coil capacitor and adjust the offset current isolator.

It is best practice to inspect the original board and note the positions of the jumpers. Some might be positioned to configure the board for your requirements. Others might be positioned as they came from the factory. Either way, it is important to make sure the jumpers are positioned identically in the replacement board as they are in the original board. The replacement board might be a later version than the original board and you might find that the jumpers are located in different positions. Or, you might find that the jumpers on the original board does not exist on the placement board.

You can be sure that the replacement board has been tested in an array of replacement scenarios and any special jumper requirements are documented and available for you use in the information provided with the replacement board. Also, the boards are compatible and are designed to provide the exact same functionality.

","meta_title":"GE Fanuc Power Supply Unit","meta_description":"GE Fanuc Power Supply Unit","keywords":"GE Fanuc Power Supply Unit","series_page_description":"GE Fanuc Power Supply Unit","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1893,"product_id":14033,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14034,"part_number":"531X111PSHAKG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Pwr Supply Card","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAKG3","content":"

The GE Terminal Board Relay Card 531X111PSHAKG3 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. You must consider that the GE Terminal Board Relay Card 531X111PSHAKG3 might be a later version of the board it is replacing in your drive. The replacement board might have components that appear to be different and it might have connectors, jumpers, terminals, and switches in different locations on the board. However, despite the differences, the boards are compatible and will provide the same functionality in the drive.

Before you disconnect any cables or wires, compare the boards and note any differences. It is best practice to use labels or stickers to write down where each cable or wire is connected on the original board. Inspect the replacement board and locate a direct match for the connector number. If a direct match is not available, refer to the information that came with the board for instructions.

Also inspect the original board for jumpers and compare the jumpers to the replacement board. Move any jumpers to the positions that match the original board. If you cannot locate a direct match from the original board and the new board, the manuals supplied with the replacement board will provide information. The replacement board has been tested for compatibility and a work around is available for any circumstance you have encountered.

","meta_title":"Pwr Supply Card","meta_description":"Pwr Supply Card","keywords":"Pwr Supply Card","series_page_description":"Pwr Supply Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1894,"product_id":14034,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14035,"part_number":"531X111PSHALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VA-5 MFC POWER SUPPLY BOARD","short_desc":"GE Motor Field Control/Power Supply 531X111PSHALG1","content":"

The GE Terminal Board Relay Card 531X111PSHALG1 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHALG1 also includes the 3TB assembly which is attached to a metal surface in the drive. The assembly is connected to the 531X111PSHALG1 through three wires that you must disconnect from the defective assembly and reconnect when the replacement assembly is installed.

A ribbon cable connects to the assembly that also must be disconnected. Grasp the ribbon cable from the connector and use your other hand to steady the assembly. Pull the ribbon cable out and move it to one side away from the working area.

Use a screwdriver to remove the five screws that attach the assembly to the mounting surface and also remove the screws from the support posts. Set the screws aside for use in securing the replacement assembly. If any of the screws fall into the drive and lodge in the components you must locate and remove them from the drive. Use a vacuum hose attachment to clean the area.

Position the replacement assembly and mark where to drill holes for the installation. Use a drill to make holes for the screws. Then, insert the screws and tighten them to secure the assembly. Connect the three wires to the 531X111PSHALG1 and insert them into connectors MOV1, MOV2, and MOV3. Route the three wires before you connect them to the board.

","meta_title":"GE VA-5 MFC POWER SUPPLY BOARD","meta_description":"GE VA-5 MFC POWER SUPPLY BOARD","keywords":"GE VA-5 MFC POWER SUPPLY BOARD","series_page_description":"GE VA-5 MFC POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"corrosion/rust on fuses","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14036,"part_number":"531X111PSHAMG3","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MFC POWER SUPPLY CARD","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAMG3","content":"

The GE Terminal Board Relay Card 531X111PSHAMG3 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHAMG3 is a static sensitive device and it requires special consideration to avoid damage. The board comes wrapped in a plastic bag with anti-static properties. Keep the board in the bag until you are ready to install it. Best practice is to not handle the board and keep it in the box in which is arrives. Store the board in a safe place and limit others access to it to avoid damage.

When you are ready to install the board, open the lid on the shipping carton and lift the board out by holding the board by the edges. Do not touch the components on the board. You can easily damage the components by applying pressure on them when picking up the board. The components might break off or you might bend connector pins or jumper pins.

Another guideline is to limit your movement during the procedure. While you move, static can build up around you through the air or while walking over some surfaces. The most important step is to wear a wrist strap. One end of the wrist strap is attached to your wrist and the other end has a clip that you can attach to bare metal on a workbench or other surface.

","meta_title":"GENERAL ELECTRIC MFC POWER SUPPLY CARD","meta_description":"GENERAL ELECTRIC MFC POWER SUPPLY CARD","keywords":"GENERAL ELECTRIC MFC POWER SUPPLY CARD","series_page_description":"GENERAL ELECTRIC MFC POWER SUPPLY CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14037,"part_number":"531X111PSHANG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Industrial Power Supply Board","short_desc":"GE Motor Field Control/Power Supply 531X111PSHANG3","content":"

The GE Terminal Board Relay Card 531X111PSHANG3 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHANG3 includes the replacement of the 3TB assembly. The assembly is attached to the board with three wires that are attached to connectors on the board. Also, the assembly has a ribbon cable attached to it. The assembly is attached to a mounting plate in the interior of the board cabinet in the drive.

You must consider the fact that all ribbon cables require you to disconnect and reconnect them using a technique that avoids damage. The fine wires that comprise a ribbon cable are easily damaged and can be disconnected from the connector. You must avoid disconnecting the cable by pulling on the ribbon cable. The proper technique is to grasp the ribbon cable by the plastic connector with one hand. Use your other hand to steady the assembly and pull the connector out of the assembly.

Five screws secure the defective assembly to the mounting plate. Use a screwdriver to remove the screws and keep the screws together in a safe place. If any screws fall into the drive or become lodged in any other components, stop the procedure and retrieve the screws. The loose screws might damage the drive when you apply power to the drive during restart.

Using the screwdriver, remove the four support posts from the mounting surface.

","meta_title":"Industrial Power Supply Board","meta_description":"Industrial Power Supply Board","keywords":"Industrial Power Supply Board","series_page_description":"Industrial Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1892,"product_id":14037,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14038,"part_number":"531X111PSHAPG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER SUPPLY CARD","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAPG1","content":"

The GE Terminal Board Relay Card 531X111PSHAPG1 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHAPG1 can be configured to meet the specific requirements of the drive by setting the jumpers and switches. The board comes from the factory with the jumpers and switches set to the factory default settings and you can inspect the defective board and note the settings of the jumpers and switches. Then, set the jumpers and switches on the new board to match the settings on the defective board.

The replacement board is sometimes a later version of the defective board. Each version contains design improvements, component changes, and functional updates. When you compare the boards they might have different looking components and have components in new locations. However, compatibility is assured through extensive testing and quality control.

In some cases a jumper or switch might be deleted from the version of the replacement board. Due to the extensive testing performed by the factory, the documentation that comes with the board will have a complete list of instructions for working through any problems caused by deleted jumpers or switches.

The board contains five jumpers and some of the jumpers are for factory use only and some are for customer use to configure the board. For example, JP1 is for factory use only and cannot be used to configure the board.

","meta_title":"GENERAL ELECTRIC POWER SUPPLY CARD","meta_description":"GENERAL ELECTRIC POWER SUPPLY CARD","keywords":"GENERAL ELECTRIC POWER SUPPLY CARD","series_page_description":"GENERAL ELECTRIC POWER SUPPLY CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14039,"part_number":"531X111PSHAPG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Supply Board","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAPG2","content":"

The GE Terminal Board Relay Card 531X111PSHAPG2 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The GE Terminal Board Relay Card 531X111PSHAPG2 is a replacement board and is designed to be installed only by qualified installers or servicers. Because the drive is a high-voltage device and also contains moving parts that can cause injury, only trained individuals should maintain and service the drive.

The process of installing the devices starts with inspecting the area around the drive for dangerous conditions. If there are any extension cords used in the area around the drive, only grounded extension cords can be used. Replace any two-wire cords with three-wire cords to reduce the chance of electric shock. The floor around the drive must be free of all moisture and also move any items that pose a trip hazard. This would include tools, cables, and other equipment.

Inspect all 3-phase power cabling in the area and consult with a individual familiar with the site to have full knowledge of the power supplied to the drive. Also, locate and inspect the shut off equipment used for the drive. Make sure the emergency shut off is in working order and can be reached easily in an emergency.

Never work on a drive without at least one other individual dedicated to being nearby and able to help in an emergency. This individual must be familiar with the site and emergency procedures.

","meta_title":"Power Supply Board","meta_description":"Power Supply Board","keywords":"Power Supply Board","series_page_description":"Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1891,"product_id":14039,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14040,"part_number":"531X111PSHAPG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":5,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC/POWER SUPPLY CARD GE VA-5","short_desc":"GE Motor Field Control/Power Supply 531X111PSHAPG3","content":"

The GE Terminal Board Relay Card 531X111PSHAPG3 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. The installation of the GE Terminal Board Relay Card 531X111PSHAPG3 requires the use of hand tools and testing equipment that must meet some minimum standards to ensure the safety of the installers or servicers.

For the installation of the board you must have testing equipment to test for the presence of electrical current in the drive. Use this testing equipment after all power is removed from the drive to ensure all power is removed. Capacitors are components in the board that during normal operation store power and release the current. You must wait a few seconds for the power to drain from the board before you touch the board. Make sure the testing device is working properly and is calibrated to detect the electrical current in the drive. Inspect the probes attached to the tester and make sure they are securely attached.

Screwdrivers are used during the procedure to remove and tighten screws that secure the 3TB assembly. The screwdriver must be approved for electrical work. Some screwdrivers have material that appears to be insulating material but is not insulating. Also, the insulating material might be worn or missing. Do not use tools with missing worn, or cracked insulation and only approved tools have insulation that you can be sure is protection against shock.

","meta_title":"MFC/POWER SUPPLY CARD GE VA-7","meta_description":"MFC/POWER SUPPLY CARD GE VA-8","keywords":"MFC/POWER SUPPLY CARD GE VA-9","series_page_description":"MFC/POWER SUPPLY CARD GE VA-5","quote_description":null,"inventory_notes":" ","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1890,"product_id":14040,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14041,"part_number":"531X111PSHARG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER BOARD","short_desc":"General Electric 531X111PSHARG2 Motor Field Control and Power Supply Board 531X Series","content":"

The General Electric 531X111PSHARG2 card is a motor field control and power supply board. When developed, this card was made for the 531X series of replacement boards. Any number of drives and exciters manufactured by GE can have this card installed in its cabinet. This power supply board provides the power supply required by the drive to operate. It also contains the proper equipment to power the board’s motor field circuitry. As a G2 revision of the board, this card is developed for use with an external exciters.

531X111PSHARG2 provides the drive with the necessary power supplies needed to properly operate. Supplies rated at 5 VDC, 15 VDC, and 24 VDC can all be produced by the card. Motor field circuitry found on the drive are powered by the card’s integrated pulse transformer. The card contains three relays, RUN (K1), MAX (K2), and FAULT (K3) to provide system control options. Three potentiometers are also integrated onto the board. P1 (FIELD SCALE), P2 (CFB ZERO), and P3 (CFB ADJUST) all allow users to calibrate or adjust circuits or current feedbacks. Five configurable jumpers allow users to select and adjust feedback and current signals.

When installing the card, be sure to follow all provided installation parameters. Any guidelines provided by the manufacturer should be met to protect device integrity. Only allow trained personnel qualified to handle drive boards to install this card. A complete wiring and installation guide for the 531X111PSHARG2 board is available in the device’s manual and datasheet. Technical support for this power supply board was originally provided by the device’s manufacturer, General Electric.

Our friendly and helpful staff at AX Control is more than happy to speak with you via phone or email about all of your automation needs. Prices for the 531X111PSHARG2 board, as well as any other part or repair, can be obtained by contacting a member of our sales team.

","meta_title":"GENERAL ELECTRIC POWER BOARD","meta_description":"GENERAL ELECTRIC POWER BOARD","keywords":"GENERAL ELECTRIC POWER BOARD","series_page_description":"GENERAL ELECTRIC POWER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14042,"part_number":"531X111PSHARG3","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Supply Card","short_desc":"General Electric 531X111PSHARG3 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHARG3 card is a motor field control and power supply board. It was manufactured by General Electric for their 531X replacement board series. Drives and exciters developed by GE can have this card installed. The drive’s required power supply is provided by this card. Motor field circuitry can also be powered with this device. This is a G3 version of the board, meaning that the MOVs for the AC line are mounted externally rather than on the board.

Drive operation is reliant on the 531X111PSHARG3 power supply board functioning properly. This card can produce three power supplies rated at 5 VDC, 15 VDC, and 24 VDC. An integrated pulse transformer on the card provides power to the motor field circuitry in the drive. Device controls are performed via the three onboard relays. The three are comprised of K1 (RUN), K2 (MAX), and K3 (FAULT). An additional three potentiometers are also found on the board. These include P1 FIELD SCALE, P2 CFB ZERO, and P3 CFB ADJUST, with all providing users with the ability to adjust and calibrate current feedbacks and circuits. Feedback and current signals in the card can be adjusted using the the five configurable jumpers found on the card.

General Electric includes a set of installation parameters that users should meet. Risks of damages to the device are lessened by following these guidelines. 531X111PSHARG3 should only be installed by trained personnel that are qualified to handle boards like this. An illustrated wiring guide can be found in the manual and datasheet associated with the board. Originally, General Electric provided technical support for this board.

AX Control’s knowledgeable and friendly sales staff is more than happy to speak with you about all of your automation needs. To receive prices on the 531X111PSHARG3 board or any other part or repair, please contact a member of our team by phone or email.

","meta_title":"Power Supply Card","meta_description":"Power Supply Card","keywords":"Power Supply Card","series_page_description":"Power Supply Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1889,"product_id":14042,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14043,"part_number":"531X111PSHASG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"POWER SUPPLY CARD 006/01 GE","short_desc":"General Electric 531X111PSHASG1 Motor Field Control and Power Supply Board 531X Series","content":"

General Electric designed the 531X111PSHASG1 card as a motor field control and power supply board. It was designed for the 531X series of replacement boards for GE drives. Most drives across the series can accept this card in its cabinet. When installed, the board furnishes the power supply required by the drive to operate. The motor field circuitry also receives a power supply from the card.

Since this card provides power to the drive, it serves an important purpose for overall operation. 531X111PSHASG1 can provide three different rated voltages to the drive. Created supplies include 5 VDC, 15 VDC, and 24 VDC. Supplies are also provided to the motor field circuit from the board’s integrated pulse transformer. Relays on the board are also available, including RUN (K1), MAX (K2), and FAULT (K3). Current and circuit feedbacks can be calibrated and adjusted using the three potentiometers found on the card. Users can also configure the five jumpers to adjust and fix feedback and current signals.

Parameters provided by the manufacturer regarding installation should be followed. The risk of damage or defect to the board are lessened when these guidelines are followed. Drive boards should only be installed by qualified personnel that are trained to handle these cards. For a guide to wiring 531X111PSHASG1, reference the device’s corresponding datasheet and manual. The manufacturer of the board, General Electric, originally provided technical support to this card.

AX Control’s knowledgeable sales team is more than happy to assist with all of your automation needs. Please call or email our office to receive any pricing or other relevant information on this board or any other part or repair.

","meta_title":"POWER SUPPLY CARD 006/01 GE","meta_description":"POWER SUPPLY CARD 006/01 GE","keywords":"POWER SUPPLY CARD 006/01 GE","series_page_description":"POWER SUPPLY CARD 006/01 GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14044,"part_number":"531X111PSHASG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC Power Supply","short_desc":"General Electric 531X111PSHASG2 Motor Field Control and Power Supply Board 531X Series","content":"

General Electric’s 531X111PSHASG2 is a motor field control and power supply board. It was designed for the 193X series of replacement drive boards. An array of drives and exciters across the GE family can accept this board in its cabinet. A vital component of the drive system, this card provides the power supplies required by the drive to operate fully. Since this card is a G2 version of the board it was developed to be used with an external exciter.

This card is an integral component of the drive as it provides the system with the power required to operate. 531X111PSHASG2 can produce rated supplies of 5 VDC, 15 VDC, and 24 VDC. The card’s integrated pulse transformer powers the motor field circuitry found in the drive. There are three relays found on this card. These include RUN (K1), MAX (K2), and FAULT (K3). Each relay provides a different system control option. There are also three potentiometers integrated onto the board. These are labelled as P1 (FIELD SCALE), P2 (CFB ZERO), and P3 (CFB ADJUST). All provide users with the ability to calibrate or adjust circuits or current feedbacks. The board is completed with five configurable jumpers. These jumpers are used to allow users to select and adjust current and feedback signals.

Drive boards are provided with a number of manufacturer outlined installation parameters. Meeting these will reduce some risks of damages or defects happening to the drive and its boards. As an important feature of the drive, do not permit any untrained personnel to handle or install this board. Only those familiar with the 531X111PSHASG2 should be allowed to install it. Please review the installation and wiring directions found in the corresponding device manual and datasheet. General Electric was the original technical support provider for this board.

Our trained and helpful sales team at AX Control is more than happy to speak with you via phone or email regarding all of your automation needs. Prices for the 531X111PSHASG2 board, or any other part or repair, is available by contacting our office.

","meta_title":"MFC Power Supply","meta_description":"MFC Power Supply","keywords":"MFC Power Supply","series_page_description":"MFC Power Supply","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1888,"product_id":14044,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14045,"part_number":"531X111PSHASG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC POWER SUPPLY 006/01 GE BOARD","short_desc":"General Electric 531X111PSHASG3 Motor Field Control and Power Supply Board 531X Series","content":"

531X111PSHASG3 is a motor field control and power supply board. It is a member of General Electric’s 531X series of replacement boards. This card can be installed in a number of drives and exciters from across the GE brand. Power supplies required by the drive are furnished by this card. It can also power the device’s integral motor field circuitry. Different revisions of this card have been made, resulting in different board configurations. This card is a G3 revision with all MOVs connected to the AC line are externally mounted.

The power board is an integral part of the drive system. Three different power supplies rated at 5 VDC, 15 VDC, and 24 VDC are produced by this card. Motor field circuitries are provided with power by the 531X111PSHASG3 board’s integrated pulse transformer. There are three relays incorporated onto the card as well. These include RUN or K1, MAX or K2, and FAULT or K3. Also included are three potentiometers that allow users to adjust and calibrate circuit and current feedbacks. Five configurable jumpers also allow users to adjust current and feedback signals.

Provided parameters regarding board installation should be met by the user. Following these will lessen the risk of device damages to the board and the drive. 531X111PSHASG3 should only be handled by qualified personnel that are trained to install these types of drive boards. To ensure proper wiring occurs, please refer to the card’s manual and datasheet. General Electric, the device’s manufacturer, was the original provider of technical support.

Our sales team at AX Control is ready to speak with you about all of your automation needs. Information regarding pricing on the 531X111PSHASG3 power supply board, or any other part or repair, can be obtained by calling or emailing our office.

","meta_title":"MFC POWER SUPPLY 006/01 GE BOARD","meta_description":"MFC POWER SUPPLY 006/01 GE BOARD","keywords":"MFC POWER SUPPLY 006/01 GE BOARD","series_page_description":"MFC POWER SUPPLY 006/01 GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14046,"part_number":"531X111PSHATG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC Power Supply Card","short_desc":"General Electric 531X111PSHATG2 Motor Field Control and Power Supply Board 531X Series","content":"

The General Electric 531X111PSHATG2 board is a motor field and power supply card. It was designed for the 531X replacement series of drive boards and cards. As a replacement part, it can be installed in a number of exciters and drives across the GE brand. Required power supplies are created with this integral piece of the drive cabinet. Specifically, this G2 version of the board was developed to be operated in an external exciter.

Required power supplies are produced for the drive by this card. Supplies rated at 5 VDC, 15 VDC, and 24 VDC can be outputted by the board. 531X111PSHATG2 also includes an integrated pulse transformer that provides power to the drive’s motor field circuitry. The card also offers three relay points, K1 (RUN), K2 (MAX), and K3 (FAULT). Each of these relay points offers a different option for system control. Three potentiometers are also provided for users to adjust or calibrate circuit or current feedbacks. These include P1 (FIELD SCALE), P2 (CFB ZERO), and P3 (CFB ADJUST). Current and feedback signals can also be adjusted using the five jumpers found on the board.

Any manufacturer provided installation parameters associated with the board should be met. These are provided to lessen the risk of device damages or defects resulting from improper installation or handling. Only permit users trained to handle this boards to install the motor field control and power supply card. For a complete guide to wiring the 531X111PSHATG2 board, please reference the system’s manual and device datasheet. General Electric originally provided technical support for the board.

AX Control’s trusted sales team is available to speak with you regarding all of your automation needs. Pricing on the 531X111PSHATG2 card, as well as any other part or repair, can be obtained by calling or emailing a member of our staff.

","meta_title":"MFC Power Supply Card","meta_description":"MFC Power Supply Card","keywords":"MFC Power Supply Card","series_page_description":"MFC Power Supply Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1886,"product_id":14046,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14047,"part_number":"531X111PSHATG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MFC POWER SUPPLY BOARD 006/02","short_desc":"General Electric 531X111PSHATG3 Motor Field Control and Power Supply Board 531X Series","content":"

General Electric developed the 531X111PSHATG3 card as a motor field control and power supply board. It is a member of GE’s 531X replacement series of drive boards and cards. Members of this series can be installed in a number of GE older and obsolete models of drives and exciters. This board is a key component of the overall drive system as it provides the power supplies needed for drive operation. Using this board also provides power to the drive’s motor field circuitry. G3 series of this board features MOVs for the AC line that are mounted externally rather than on the board itself.

Proper function of this board is integral to overall board operation. Power supplies rated at 5 VDC, 15 VDC, and 24 VDC are all produced by this card. Motor field circuits are provided with power supplies from the card’s integrated pulse transformer. Three relays found on the board provide users with drive controls. RUN (K1), MAX (K2) and FIELD (K3) are all found on the card. 531X111PSHATG3 includes a number of onboard adjustment controls. The three potentiometers allow users to adjust and calibrate current circuits and feedbacks. These are labelled as P1 (SCALE), P2 (CFB ZERO), and P3 (CFB ADJUST). Feedback and current signals can also be adjusted using the five configurable jumpers integrated into the board.

Provided storage and installation parameters should be met by the user. The manufacturer provided these to decrease the risk of any damages to the drive or its boards. Only permit qualified personnel who are trained to handle these drive boards to install 531X111PSHATG3. Wiring and installation guides can be found in the series manual as well as the board’s datasheet. Technical support was originally provided by the series manufacturer, General Electric.

Our trusted sales team at AX Control is happy to speak with you via phone or email about all of your automation needs. Please contact our office to receive pricing information about the 531X111PSHATG3 board, as well as any other part or repair.

","meta_title":"GE MFC POWER SUPPLY BOARD 006/04","meta_description":"GE MFC POWER SUPPLY BOARD 006/05","keywords":"GE MFC POWER SUPPLY BOARD 006/06","series_page_description":"GE MFC POWER SUPPLY BOARD 006/02","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14048,"part_number":"531X111PSHAWG2","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER SUPPLY BOARD","short_desc":"General Electric 531X111PSHAWG2 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHAWG2 card was manufactured by General Electric to operate as a motor field control and power supply board. When developed, this card was created for the 531X series of replacement drive and exciter boards. Drives across the GE family can have this card installed into its cabinet. The card works to provide the required power supplies needed for the drive. As a G2 revision of the board, this card specifically was designed to be installed in an external exciter.

Three power supplies can be sourced using this supply board. Installing the 531X111PSHAWG2 board provides supplies rated at 5 VDC, 15 VDC and 24 VDC to the host drive. The board also provides the drive with an integrated pulse transformer to power the motor field circuitry. Three relay points are also provided by the card. These can be identified as position K1 (RUN), K2 (MAX), and K3 (FAULT). System control options can be utilized with these relays. Circuit and current feedbacks can be adjusted and calibrated with the three onboard potentiometers. Five jumpers also allow for adjustments to be made to the current and feedback signals.

Be sure to review all provided installation parameters associated with this card. To lessen the risk of device damage, only qualified personnel should be permitted to install the 531X111PSHAWG2 power supply board. The device manual and datasheet contains a comprehensive wiring and installation guide. Technical support for this board was originally provided by General Electric.

The trusted sales staff at AX Control is happy to speak with you via phone or email regarding all of your automation needs. Information on pricing and availability for the 531X111PSHAWG2 board, or any other part or repair, can be obtained by contacting our office.

","meta_title":"GENERAL ELECTRIC POWER SUPPLY BOARD","meta_description":"GENERAL ELECTRIC POWER SUPPLY BOARD","keywords":"GENERAL ELECTRIC POWER SUPPLY BOARD","series_page_description":"GENERAL ELECTRIC POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14049,"part_number":"531X111PSHAWG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DC300 531X111PSHAWG3 Power Supply Board","short_desc":"General Electric 531X111PSHAWG3 Motor Field Control and Power Supply Board 531X Series","content":"

General Electric’s 531X111PSHAWG3 card was originally developed to function as a power supply and motor field control board. This card was developed as a replacement board for the GE 531X replacement card series. Older drives from the GE family can have this card installed in the device’s cabinet. Installing the card provides the host drive with the power supplies needed for proper function. Developed as a G3 board version, this card features MOVs for the AC line that are not mounted on the board. The MOVs are mounted on externally rather than on the board.

When installed, the 531X111PSHAWG3 board provides the drive with three power supplies. Users can select the required voltage from 5 VDC, 15 VDC and 24 VDC. Additionally, the card provides an integrated pulse transformer that powers the installed drive’s motor field circuitry. The board also features a number of additional features. Onboard, the card includes three relay points. These relays allow the user to execute system control functions on the board. Also featured on the card are three potentiometers and five jumpers. The potentiometers allow for adjustments to be made to the current and circuit feedbacks, while the jumpers allow for current and feedback signal calibration.

Any manufacturer provided installation parameters should be reviewed before beginning device installation. Only permit users who are trained to handle drive boards to install this card. A comprehensive wiring guide for the 531X111PSHAWG3 power supply board can be located in the series manual as well as the device datasheet. General Electric, the device manufacturer, originally provided the card with technical support.

AX Control’s knowledgeable and trusted sales staff is happy to help with all of your automation needs. Please contact our office via phone or email to receive current prices on this or any other part or repair.

","meta_title":"GE DC300 531X111PSHAWG3 Power Supply Board","meta_description":"GE DC300 531X111PSHAWG3 Power Supply Board","keywords":"GE DC300 531X111PSHAWG3 Power Supply Board","series_page_description":"GE DC300 531X111PSHAWG3 Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1887,"product_id":14049,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14051,"part_number":"531X111PSHSWG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Pwr Supply MFC Module","short_desc":"General Electric 531X111PSHSWG2 Motor Field Control and Power Supply Board 531X Series","content":"

The 531X111PSHSWG2 card is a motor field control and power supply board manufactured by General Electric. As a member of GE’s 531X series of replacement boards, this card can be installed into an array of drives across the GE family. Installing this card provides the power supply necessary for proper drive function. Since this board was developed as a G2 version, it functions best when installed in external exciters.

Installing this power board provides the drive with three acceptable voltage sources. 531X111PSHSWG2 can produce voltages rated at 5 VDC, 15 VDC, and 24 VDC. The motor field circuitry of the drive also receives a supply from the board’s integrated pulse transformer. A number of control options and system calibrations can be performed from the card. Three onboard relays allow users to execute system control options. These can be identified on the card as K1 (RUN), K2 (MAX), and K3 (FAULT). The card also contains three potentiometers and five jumpers. Circuit and current feedback adjustments are performed with the potentiometers while adjustments to the current and feedback signals are performed by the jumpers.

General Electric provides a number of installation parameters that should be reviewed before beginning device installation. To ensure the device does not suffer any preventable damages, the card should only be handled by qualified personnel. Be sure to review the device’s manual and datasheet for a comprehensive installation and wiring guide. The device’s manufacturer, General Electric, originally provided the card with technical support.

AX Control’s experienced sales staff is available to speak with you by phone or email about of all of your automation needs. Please contact our office to receive pricing and any other information about the 531X111PSHSWG2 board as well as any other part or repair.

","meta_title":"Pwr Supply MFC Module","meta_description":"Pwr Supply MFC Module","keywords":"Pwr Supply MFC Module","series_page_description":"Pwr Supply MFC Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1885,"product_id":14051,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14052,"part_number":"531X112PSAAEG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER SUPPLY BOARD","short_desc":null,"content":"

The 531X112PSAAEG1 is part of the 531X series of circuit boards by General Electric. The 531X112PSAAEG1 has six large light blue capacitors, one red circular capacitor, two orange capacitors, one large black capacitor, and four yellow capacitors. These capacitors are a passive electronic component which effects capacitance. There are ten small black transistors on 531X112PSAAEG1, these transistors are semiconductors that allow for rectification and amplification. The transistors have three connections which allow for connection to external circuits. There are also four glass fuses on 531X112PSAAEG1 which are electrical safety devices, fuses like those on this board have been in wide usage in electronics for decades. The 531X112PSAAEG1 has one transformer which transfers electrical energy between two or more circuits through electromagnetic induction. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" in a second coil. The 531X112PSAAEG1 has over thirty diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X112PSAAEG1 also has over seventy resistors. Some of the resistors do have colored strips. The bands on the resistors correspond with a color code. Each colored band corresponds with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses.

Contact AX Control for a quote.

","meta_title":"GE POWER SUPPLY BOARD","meta_description":"GE POWER SUPPLY BOARD","keywords":"GE POWER SUPPLY BOARD","series_page_description":"GE POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 13:31:07","prod_pdf":[]},{"id":14053,"part_number":"531X112PSAALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-5 POWER SUPPLY GENERAL ELECTRIC","short_desc":null,"content":"

The 531X112PSAALG1 is a VA-5 Power Supply circuit board. The 531X112PSAALG1 is meant for industrial uses and is manufactured by General Electric. General Electric is a large contender in the industrial world and has been around since 1892 and was created by the merger of Edison General Electric and Thomas-Houston. The 531X112PSAALG1 is a complex circuit board with many pieces. The 531X112PSAALG1 has ninety resistors around the circuit board. The 531X112PSAALG1 has three small glass fuses and two large fuses. The fuses are a safety measure to prevent overcurrent protection. In the event of a power surge, the fuse will “sacrifice” itself by breaking the metal wire inside to break the circuit the energy was flowing through. Once this occurs the fuse does need to be replaced. The 531X112PSAALG1 has thirteen small half circular black transistors and one black square transistor with a metal top. Transistors can be found in many things you rely on and use every day, like computers, radios, and calculators to name a few. The 531X112PSAALG1 has forty-six different capacitors. Each capacitor creates its own electrical field that is then used to house additional energy for the circuit board. The 531X112PSAALG1 has thirty-three variously sized diodes. The 531X112PSAALG1 has two small inductors. An inductor is a passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it. The 531X112PSAALG1 has six black metal cage-like brackets around the circuit board.

Please call or email AX Control’s wonderful staff for more information.

","meta_title":"VA-5 POWER SUPPLY GENERAL ELECTRIC","meta_description":"VA-5 POWER SUPPLY GENERAL ELECTRIC","keywords":"VA-5 POWER SUPPLY GENERAL ELECTRIC","series_page_description":"VA-5 POWER SUPPLY GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 08:38:31","prod_pdf":[]},{"id":14054,"part_number":"531X112PSAAMG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER SUPPLY CARD","short_desc":"The 531X112PSAAMG1 is a GE Power Supply Card","content":"

531X112PSAAMG1--Power Supply Card

The 531X112PSAAMG1 is a board component manufactured by General Electric for use within its general purpose drive systems. This includes systems like the AC-300 or the DC-300 drive.

The 531X112PSAAMG1 functions as a Power Supply board. This rectangular card is dense with components. It is drilled for mounting in all four corners. The board has six heat sinks mounted to its surface to allow for quicker dissipation of built-up heat. This allows components and the board to work more efficiently.

The 531X112PSAAMG1 communicates with off-board components or with other boards using its eleven header connectors, three stab-on connectors, and one vertical pin male cable connector. Six of the headers are two-pin connectors while others are larger.

The 531X112PSAAMG1 has a single metal oxide varistor (MOV.) It has two inductor coils, five fuses, and over a dozen transistors. The board has three relays, a transformer, and several jumper switches. It also has resistors, capacitors, and diodes of various size and material. The board has four integrated circuits. Information about jumper selection is printed on the board surface in a small table that is located near the bottom left corner. When replacing a board it is best to make note of current jumper settings and set your replacement board to the same settings before installing.

General Electric provided the original technical support for this and all other boards within the 531x series. Please refer to original publications like user guides, drive manuals, or board data sheets for more information regarding maintenance, installation, or operation of the board.

","meta_title":"GE POWER SUPPLY CARD","meta_description":"GE POWER SUPPLY CARD","keywords":"GE POWER SUPPLY CARD","series_page_description":"GE POWER SUPPLY CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-12 09:32:22","prod_pdf":[]},{"id":14076,"part_number":"531X112PSAARG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER SUPPLY BOARD","short_desc":null,"content":"

The 531X112PSAARG1 is a Power Supply circuit board by General Electric. The 531X112PSAARG1 has three glass fuses and two large glass fuses with a white weaved fabric around the glass. The 531X112PSAARG1 has one transformer. The transformer is a static electrical device that transfers electrical energy between two or more circuits using electromagnetic induction. The 531X112PSAARG1 has one small black square transistor and thirteen small black half circle transistors. Transistors are a semi-conductive device that is used to amplify or switch electronic signals and electrical power. The transistors have at least three connection points to the circuit board, making them a little easier to spot. The 531X112PSAARG1 has fifty various types of capacitors. The various capacitors consist of one or more pairs of conductors separated by an insulator. These capacitors are used to store an electrical charge. The 531X112PSAARG1 has thirty diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X112PSAARG1 has two inductors. The inductors can be identified by the wire coiled around the outside of the device (usually circular). The inductors store energy in a magnetic field as an energy current flows through them. The 531X112PSAARG1 has ten sets of metal prongs around with a white plastic base and backing scattered around the circuit board. The 531X112PSAARG1 has ninety-four various resistors. Resistors are a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses.

Please contact AX Control today for all your automation needs.

","meta_title":"GENERAL ELECTRIC POWER SUPPLY BOARD","meta_description":"GENERAL ELECTRIC POWER SUPPLY BOARD","keywords":"GENERAL ELECTRIC POWER SUPPLY BOARD","series_page_description":"GENERAL ELECTRIC POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:27:23","prod_pdf":[]},{"id":16442,"part_number":"531X113PSFAPG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER SUPPLY INTERFACE CARD","short_desc":null,"content":"

The 531X113PSFAPG1 is a large circuit board used for Turbine Control. This particular board is a Power Supply Interface Card by General Electric. The 531X113PSFAPG1 has eighty capacitors. The capacitors on 531X113PSFAPG1 store electrical energy in an electric field. The 531X113PSFAPG1 has two hundred and fifty-six types of resistors. Resistors implement electrical resistance and are used when you need to reduce current flor, divide voltages, etc. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The 531X113PSFAPG1 has three inductors. Inductors store energy in a magnetic field as a current passes through them. The 531X113PSFAPG1 is a large circuit board with many pieces. The 531X113PSFAPG1 has nineteen integrated circuits. An integrated circuit is essentially the brains of the circuit board. They hold all the programming data for the circuit board to function. The integrated circuits are split into two groups referred to as EPROM and EEPROM. They are the same with one exception, the EPROM can be updated with new programming data while the EEPROM cannot. The 531X113PSFAPG1 has two small blue boxes labeled AMP on the side. The top of these boxes is labeled OFF in the bottom left corner and has three white small buttons labeled one, two, and three. There are variable resistors on 531X113PSFAPG1 which can be identified as six small blue boxes with a white knob in the center. To make adjustments on these you will need to use a screwdriver, in this way the potentiometer is set to allow potential passed through a circuit.

The staff at AX Control looks forward to answering any questions you may have. Give them a call today.

","meta_title":"GENERAL ELECTRIC POWER SUPPLY INTERFACE CARD","meta_description":"GENERAL ELECTRIC POWER SUPPLY INTERFACE CARD","keywords":"GENERAL ELECTRIC POWER SUPPLY INTERFACE CARD","series_page_description":"GENERAL ELECTRIC POWER SUPPLY INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 13:18:59","prod_pdf":[]},{"id":14055,"part_number":"531X113PSFARG1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Supply Interface Card Module","short_desc":"The 531X113PSFARG1 is a Power Supply Interface Card Module","content":"

The 531X113PSFARG1 is a board component created by GE as a general purpose drive used in many drive systems across the General Electric catalog. Please review your drive system’s user manual to ascertain whether boards from the 531x series will be compatible.

The 531X113PSFARG1 is a Power Supply Interface Card. This is marked with the board number and the manufacturer logo and is marked with several codes including F31x113PSFALG1. The surface of the board is marked “Power Supply Interface Card.”

The 531X113PSFARG1 is populated by six vertical pin (male) cable connectors. The board has six header connectors, including a 2-pin, a 4-pin, two 6-pin, and two 9-pin connectors. There are six potentiometers on the board as well as over ten resistor network arrays. The board has lines of metal film resistors with a few interspersed carbon composite resistors. The board has capacitors made of polyester vinyl and electrolytic material. This includes several large electrolytic capacitors.

The 531X113PSFARG1 has three heat sinks. Several of these connect or back to inductor coils. The board has a total of six inductor coils. The board has three fuses, three relays, transistors, and three LED indicators. The board has multiple integrated circuits and TP test points. Some components are mounted off the surface of the board.

If more information is needed about the board, its function, installation, and handling, or about the individual components, please refer to publications from the manufacturer that reference this part number, such as manuals and user guides. Technical support for this PCB was originally provided by General Electric.

","meta_title":"Power Supply Interface Card Module","meta_description":"Power Supply Interface Card Module","keywords":"Power Supply Interface Card Module","series_page_description":"Power Supply Interface Card Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 14:09:02","prod_pdf":[{"id":1884,"product_id":14055,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14056,"part_number":"531X113PSFASG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Interface Card Power Supply Board","short_desc":"The 531X113PSFASG1 is an Interface Card Power Supply Board","content":"

The 531X113PSFASG1 is a Power Supply Interface Board manufactured by General Electric. It is used in various general purpose drive systems from GE and was not created as a component for one specific system. Please check your system’s user guide for compatibility.

The 531X113PSFASG1 is a component-rich board. The upper right quadrant of the board is heavily populated by large capacitor components. These tend to be aluminum electrolytic capacitors. This quadrant also includes three heat sinks and four inductor coils. The board has three fuses, two here, and one directly below in the lower right quadrant. This quadrant is primarily populated by six header connectors (one two-pin connector, one four pin connector, two six pin connectors, and two 9 pin connectors,) three relays, and several capacitors. This quadrant also includes one of the board’s vertical pin cable connectors. The 531X113PSFASG1 has a total of six cable connectors. All connectors are male, vertical pin connectors.

Other components that populate the 531X113PSFASG1 include integrated circuits, resistors made of carbon composite and metal film, resistor network arrays, six potentiometers, a switch component with a total of six toggles, jumper switches, TP test points, and diodes, including three LED (light emitting diode) indicators. Most components are marked with a reference designator for quick identification. If more information is necessary about components or about the function, use, or operation of the board, including maintenance and installation, please refer to manufacturer publications that reference this board number. Technical support for the 531x series was provided by General Electric.

","meta_title":"Interface Card Power Supply Board","meta_description":"Interface Card Power Supply Board","keywords":"Interface Card Power Supply Board","series_page_description":"Interface Card Power Supply Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 14:31:44","prod_pdf":[{"id":1883,"product_id":14056,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14057,"part_number":"531X116SHAAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SHIELD CARD","short_desc":null,"content":"

The GE 531X116SHAAAG1 shield card manufactured by the GE Drives Department out of Erie, PA, is a very basic component card that is not a PCB. The shield card serves to protect the board which it is placed up against and creates a barrier necessary for functionality in certain environments. Unlike most PCBs the 531X116SHAAAG1 does not actually have traces or components printed onto it and instead it is a specially designed quasi translucent material.

Also printed on the 531X116SHAAG1 board itself is another part number F31116SHAAAG1. The card features two small holes on one end which can be used to attach the card to whichever board it is installed to protect.

","meta_title":"GE SHIELD CARD","meta_description":"GE SHIELD CARD","keywords":"GE SHIELD CARD","series_page_description":"GE SHIELD CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:28:50","prod_pdf":[]},{"id":14058,"part_number":"531X116SHAAAG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"FR00/0 PBC CIRCUIT CARD GE","short_desc":null,"content":"

The 531X116SHAAAG2 is a shield card from General Electric. The 531X116SHAAAG2 is a thin copper colored card. The 531X116SHAAAG2 is used to eliminate or reduce any electromagnetic interference. The 531X116SHAAAG2 are also used to cover printed circuit boards also referred to as PCB’s to protect specific electronic devices from harmful radiations at the source.

Please call AX Control’s knowledgeable staff with any inquiries you may have.

","meta_title":"FR00/0 PBC CIRCUIT CARD GE","meta_description":"FR00/0 PBC CIRCUIT CARD GE","keywords":"FR00/0 PBC CIRCUIT CARD GE","series_page_description":"FR00/0 PBC CIRCUIT CARD GE","quote_description":null,"inventory_notes":"MINOR SCRATCH ","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:29:33","prod_pdf":[]},{"id":14059,"part_number":"531X118CCAACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE AMP CARD","short_desc":null,"content":"

The 531X118CCAACG1 is an AMP card produced by General Electric. The 531X118CCAACG1 has six yellow bead-like capacitors and four pale blue capacitors. The capacitors consist of one or more pairs of conductors separated by an insulator. These capacitors are used to store an electrical charge. The 531X118CCAACG1 has twenty small resistors with colored strips and four large resistors with colored strips. Resistors are a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The 531X118CCAACG1 has ten integrated circuits. An integrated circuit is essentially the brains of the circuit board. They hold all the programming data for the circuit board to function. The integrated circuits are split into two groups referred to as EPROM and EEPROM. They are the same with one exception, the EPROM can be updated with new programming data while the EEPROM cannot. The 531X118CCAACG1 has one small silver circular transistor and a large circular black transistor. Transistors are a semi-conductive device that is used to amplify or switch electronic signals and electrical power. The transistors have at least three connection points to the circuit board, making them a little easier to spot. The 531X118CCAACG1 has a black female terminal on one edge with twenty-five ports. The 531X118CCAACG1 has a green female terminal on the opposite edge with eight flathead screws to secure the items in place.

Please contact AX Control today with any inquiries you may have.

","meta_title":"GE AMP CARD","meta_description":"GE AMP CARD","keywords":"GE AMP CARD","series_page_description":"GE AMP CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:30:16","prod_pdf":[]},{"id":14013,"part_number":"531X11PSHAKG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL BOARD","short_desc":"The 531X11PSHAKG3 is a GE Control Board","content":"

The 531X11PSHAKG3 is a board component manufactured by GE. It is used within the DC-300 drive and other general purpose drives produced by GE. These are flexible and powerful systems that have been designed for use in various industrial applications. Your particular system’s manufacturer-provided user guide or manual will help you determine which 531x boards are compatible with your setup.

The 531X11PSHAKG3 is marked with codes VA-5 and ‘GE Fanuc.’ The board functions as a Power supply card. It has multiple connectors, including over a dozen stab-on connectors, a vertical pin cable connector (male,) and ten header connectors that vary from nine pins down to two pins.

The 531X11PSHAKG3 has four jumper switches, three transformers, three inductor coils, and three relays. Relays are of two types. Inductors include one large inductor coil and two small. There are other types of inductors located on the board. There are thirteen transistors, eight fuses, and three heat sinks on the surface of the board. Heat sinks help dissipate heat from other components to maintain a proper working board temperature.

The 531X11PSHAKG3 has a single metal oxide varistor (MOV.) It has three potentiometers. Resistors are made of carbon composite and metal film. Capacitors can be made from ceramic material, electrolytic material, or polyester vinyl. More information on how the board is designed to operate, as well as board components and their functions, is available through publications from the manufacturer like manuals and user guides that reference this board number. Please follow all recommended handling and safety procedures.

","meta_title":"GE CONTROL BOARD","meta_description":"GE CONTROL BOARD","keywords":"GE CONTROL BOARD","series_page_description":"GE CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-26 09:20:22","prod_pdf":[]},{"id":14060,"part_number":"531X121PCRAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VA-4 POWER CONNECT CARD","short_desc":"GE Power Connection Board 531X121PCRAAG1","content":"

The GE Power Connection Board 531X121PCRAAG1 is a renewal part for multiple original equipment power connection boards. The 531X121PCRAAG1 board contains two jumpers that the installer can use to configure the board for use in the drive. The installer must use the information that comes with the original power connection board to match the DC armature voltage in the replacement board. The two jumpers in combination define the voltages to match the original board. For example, with the JP1 jumper on pins P3 and P8 and JP2 jumper on pins P6 and P9, the voltage on G1/G4 is 190 and the G2 voltage is 350 and the G3 voltage is 50.

Be sure to set the jumpers on the replacement board exactly as the jumpers are set on the original board.

The drive contains diagnostic tools that you use the verify that the original power connection board must be replaced. Access the diagnostic tools from the control panel by using the keypad to move through the menus to start the diagnostics tools. The diagnostics provide a complete list of the specifics of the drive and also the components related to the power connection board. You can download the diagnostics to a laptop for review and to save the file.

After the power connection board is replaced, you can run the diagnostics tool again and compare the results. If the replacement was successful, the diagnostics report will verify that the original power connection board was the source of the problem and that the replacement was successful.

","meta_title":"GE VA-4 POWER CONNECT CARD","meta_description":"GE VA-4 POWER CONNECT CARD","keywords":"GE VA-4 POWER CONNECT CARD","series_page_description":"GE VA-4 POWER CONNECT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14061,"part_number":"531X121PCRACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER SUPPLY BOARD","short_desc":"GE Power Connection Board 531X121PCRACG1","content":"

The GE Power Connection Board 531X121PCRACG1 is a renewal part for multiple original equipment power connection boards. The 531X121PCRACG1 contains jumpers that you must set before you install the board to match the voltages that the drive needs to operate. The board contains two jumpers that you must insert over the pins to produce the specific voltages for the drive. Use your fingers or a needle-nose pliers to insert the jumpers. Do not rest the jumpers on the board and make sure the jumpers are inserted securely. If the jumpers are lost inside the drive you must find the jumpers and install them before you start the drive.

If you don’t set the jumpers correctly, you might damage the drive components or the incorrect voltages might result in unreliable operation of the drive. Be careful when you insert the jumpers over the pins that you do not bend the pins or touch other components on the board. Do not force the jumpers over the pins.

The 531X121PCRACG1 board is shipped in a container that is sealed to protect against tampering. Locate the label on the box before you open the box and check the model number and all serial numbers and all identifying information. Look for evidence that the box has been mishandled or that liquids have been spilled or leaked on the box. Having inspected the box, you can break the seal and open the container. Collect the manual and all other written material, for example, the printed warranty and service information and special instructions.

","meta_title":"GE POWER SUPPLY BOARD","meta_description":"GE POWER SUPPLY BOARD","keywords":"GE POWER SUPPLY BOARD","series_page_description":"GE POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14062,"part_number":"531X121PCRAEG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER CONNECT CARD","short_desc":"GE Power Connection Board 531X121PCRAEG1","content":"

The GE Power Connection Board 531X121PCRAEG1 is a renewal part for multiple original equipment power connection boards. Anytime you must install, service or maintain the drive, you must have a qualified servicer perform the procedures. The drive is high energy device and the threat exists for serious electrical shock and burns. The servicer must also know that even when power is disconnected, that components store energy and the servicer must wait a few seconds before removing components to allow time for the electricity to exit the drive.

Another reason that only qualified servicers should work on the drive is the danger posed by the moving parts in the drive and other devices that might be in the general area. It is best practice to halt all activity in the surrounding area before repairs start. All boards are easy to replace and the drive features an easily accessed board cabinet with a drive carrier that enables quick release, removal, and installation of boards. This reduces the time the drive is offline and reduces the inconvenience and time other devices are offline also.

A grounding strap must be worn when you work on the board replacement. One end of the grounding strap is a clip that you attach to any unpainted metal surface. The other end is a strap that you wear on your wrist. The static electricity drains off you and the board and seeks ground and so prevents a static build up. The build up can damage the board.

","meta_title":"GENERAL ELECTRIC POWER CONNECT CARD","meta_description":"GENERAL ELECTRIC POWER CONNECT CARD","keywords":"GENERAL ELECTRIC POWER CONNECT CARD","series_page_description":"GENERAL ELECTRIC POWER CONNECT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14063,"part_number":"531X121PCRAGG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VA-4 PWR CONNECT CD","short_desc":"GE Power Connection Board 531X121PCRAGG1","content":"

The GE Power Connection Board 531X121PCRAGG1 is a renewal part for multiple original equipment power connection boards. The 531X121PCRAGG1 board serves as a replacement for multiple power connection boards that all have different specification for the DC armature voltage range. The board uses two jumpers that you must set to configure the board for use with your specific power connection board. There are 7 pins on the board and two jumpers. You can install the jumpers on various combinations to attain different armature voltage ranges. The 531X121PCRAGG1 board comes with the information you need to locate your defective board and to set the jumpers to provide the right voltages.

Open the carton that contains the board and you’ll find the board in a protective plastic bag. Before you lift the board out of the box there are some simple guidelines. Always lift the board from the edges only because this protects the components on top of the board. Never put pressure on the top of the board to protect the connectors, pins, and other components from being bent, broken off, or otherwise damaged.

The protective bag must remain in place until you are ready to install the board and in fact it is best practice to not remove the board from the carton until you are ready to insert it in the drive. Wear a grounding strap when you touch the board to prevent the buildup of static. The strap must be connected to a bare metal surface to drain the static.

","meta_title":"GE VA-4 PWR CONNECT CD","meta_description":"GE VA-4 PWR CONNECT CD","keywords":"GE VA-4 PWR CONNECT CD","series_page_description":"GE VA-4 PWR CONNECT CD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":16807,"part_number":"531X121PCRAGG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VA-4 PWR CONNECT CD","short_desc":"GE Power Connection Board 531X121PCRAGG3","content":"

The GE Power Connection Board 531X121PCRAGG3 is a renewal part for multiple original equipment power connection boards. The control panel on the drive is useful for accessing the diagnostic information and also for shutting down the drive. There is a key on the keypad for stopping the motor and you can press it to start the orderly shutdown procedure. You might have to consult with an electrician or engineer who is familiar with your site to locate the power supply that provides power to the drive. Once you locate the power supply, remove the fuses to disable it and stop the 3-phase current.

Give the drive a few seconds to drain all residual power from the components before you touch anything. Open the door to the board cabinet and release the tabs that secure the power connection board. Remove all cables from the board and write labels to put on the cables so you’ll know where to reinstall the cables. All connectors have numbers that provide a precise identifier to use for reattachment.

Ribbon cables require an elevated degree of care. The ribbon cable is comprised of multiple small wires that carry signals and the wires are easily broken or disconnected. Only use the connector on the end of the ribbon cable to disconnect or connect the cable. Grasp the connector and pull it out of the connector on the board. To connect it, hold the ribbon cable at the connector and press it into the connector on the board. Never pull the ribbon cable by the ribbon to disconnect it.

","meta_title":"GE VA-4 PWR CONNECT CD","meta_description":"GE VA-4 PWR CONNECT CD","keywords":"GE VA-4 PWR CONNECT CD","series_page_description":"GE VA-4 PWR CONNECT CD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14064,"part_number":"531X121PCRAHG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER CONNECT CARD","short_desc":"GE Power Connection Board 531X121PCRAHG1","content":"

The GE Power Connection Board 531X121PCRAHG1 is a renewal part for multiple original equipment power connection boards. Servicing the drive in which you replace the board requires knowledge of working with electrical equipment. The first thing to do is check the area for electrical safety hazards. Make sure the floors are not wet or damp and make sure missing safety grounds are repaired also. And replace all ungrounded power extension cords (2-prong) with grounded (3-prong) extension cords. Some tools that appears to be insulated from electrical shock are not so use only approved hand tools that are insulated.

You might plan to use a dental mirror to view hard-to-see components. If you do, the reflective surface is conductive and can cause injury to the servicer or damage to components if it touches a live current. It is best practice to use the buddy system when you work with high-voltage equipment. That is, don’t work alone and have someone nearby at all times. Before you start, inspect all hand tools, testing equipment, and other devices for signs of wear of the insulation material. Discard any tools that have worn insulation to prevent accidents.

Keep the 531X121PCRAHG1 board in the static protective bag until you are ready to install it. Locate a flat clean surface and hold the board by the edges and flatten the protective bag on the surface and place the board on the bag. Use your fingers to move the jumpers over the pins.

","meta_title":"GENERAL ELECTRIC POWER CONNECT CARD","meta_description":"GENERAL ELECTRIC POWER CONNECT CARD","keywords":"GENERAL ELECTRIC POWER CONNECT CARD","series_page_description":"GENERAL ELECTRIC POWER CONNECT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14065,"part_number":"531X121PCRAHG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER CONNECT CARD","short_desc":"GE Power Connection Board 531X121PCRAHG3","content":"

The GE Power Connection Board 531X121PCRAHG3 is a renewal part for multiple original equipment power connection boards. The 531X121PCRAHG3 board can be configured to provide the voltage needed for several power connection boards. Use the two jumpers on the board to configure it to be compatible with your original board. Included with the board is the information you need to set the two jumpers.

Once you determine the jumper settings, remove the board from the carton in which it shipped. Only hold the board by the sides to prevent damaging the components by accidently bending pins, breaking connectors, or damaging other components. Remove the protective bag and flatten the bag on a clean dry surface, for example a workbench. Use your fingers or a pair of pliers to move the jumper to cover the right pins. Don’t put down the jumpers or force the jumpers over a pin. You might bend or break a pin. Also, if you lose a jumper in the drive, you must retrieve it to avoid damage to the drive components.

Open the tabs that secure the old board and note carefully where the cables are connected. Connect the cables to the same connectors on the new board and then install the board in the drive. Secure the board by pressing the tabs which lock the board in place.

The new board might be a newer version of the original board. Even if the boards look different the new board will behave the same in the drive.

","meta_title":"GE POWER CONNECT CARD","meta_description":"GE POWER CONNECT CARD","keywords":"GE POWER CONNECT CARD","series_page_description":"GE POWER CONNECT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14066,"part_number":"531X121PCRAJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 GENERAL ELECTRIC CONTROL CARD","short_desc":"GE Power Connection Board 531X121PCRAJG1","content":"

The GE Power Connection Board 531X121PCRAJG1 is a renewal part for multiple original equipment power connection boards. Before you consider a replacement of the 531X121PCRAJG1 you must realize that the board is part of a high-energy drive and can cause serious injury, if you don’t follow simple guidelines. The safety of the individuals performing the procedure must be the highest priority.

First inspect the area around the drive and clean up any spilled liquids or puddles of water, if you see any that would conduct electricity. You might want the moisture to dry completely before you continue. Also, the spilled water or moisture might be a slip hazard and it is best practice to eliminate all hazards before they cause a problem.

The board replacement will require the use of hand tools, such as screwdrivers, wrenches, and needle-nose pliers. Inspect the tools and use only tools that are approved for use on electrical devices. Inspect the insulation on the tools and don’t use any that have worn or missing insulation. Make sure the tools are fit for the purpose and are not over sized to work on delicate circuit boards or inside the drive enclosure.

The servicer should also have testing equipment on hand during the procedure for verifying that all current has exited the drive. Follow the written instructions for using the equipment and verify that it is approved for the specific use.

The servicer should never work alone on the drive in the event an emergency occurs and the servicer needs assistance.

","meta_title":"VA-4 GENERAL ELECTRIC CONTROL CARD","meta_description":"VA-4 GENERAL ELECTRIC CONTROL CARD","keywords":"VA-4 GENERAL ELECTRIC CONTROL CARD","series_page_description":"VA-4 GENERAL ELECTRIC CONTROL CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14067,"part_number":"531X121PCRAKG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":10,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER CONNECT CARD VA-4","short_desc":"GE Power Connection Board 531X121PCRAKG1","content":"

The GE Power Connection Board 531X121PCRAKG1 is a renewal part for multiple original equipment power connection boards. The 531X121PCRAKG1 board is designed to be a replacement for several different power connection boards that provide a wide variety of voltages. The G1 and G4 voltages range from 190 volts to 500 volts. The G2 voltages range from 350 volts to 700 volts. The G3 voltage range from 50 to 240 volts. To achieve the specific voltages you need for your drive, the 531X121PCRAKG1 board provides a couple jumpers that you set to mimic the voltages in the original board you are replacing in the drive.

The manuals that come with the board provide the information you need to cross reference your drive to the jumper settings to use. It is critical that the jumpers are set correctly to avoid damage to the components of the drive. The board has two jumpers with seven pins for each jumper. Depending on the drive, you place the jumper over different sets of pins to achieve the right voltages.

For a brief example, place JP1 over pins P3 and P8 and insert the JP2 jumper over pins P6 and P9 for G1 and G4 voltage of 190, G2 voltage of 350, and G3 voltage of 50. Read and follow the information in the manual that comes with the renewal board for the results you require for your drive.

When you are setting the jumpers, rest the board on a flat surface on top of the protective bag and use your fingers or pliers to move the jumpers.

","meta_title":"GE POWER CONNECT CARD VA-6","meta_description":"GE POWER CONNECT CARD VA-7","keywords":"GE POWER CONNECT CARD VA-8","series_page_description":"GE POWER CONNECT CARD VA-4","quote_description":null,"inventory_notes":"","cross_reference":"F31X121PCRAEG1","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14068,"part_number":"531X121PCRALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Industrial Power Connect Card Module","short_desc":"GE Power Connection Board 531X121PCRALG1","content":"

The GE Power Connection Board 531X121PCRALG1 is a renewal part for multiple original equipment power connection boards. Troubleshooting the drive to verify that the 531X121PCRALG1 board is defective is designed to be easy with the troubleshooting tools available with the drive. The diagnostics tools result in a list of all the specific details on the operation of the drive. Use the list to find components that have failed or are becoming less reliable and might fail at a later time. You can also use the list to improve the operation of the drive by configuring the components to work in closer alignment with your requirements.

While the drive is fully connected to power and is operational, use the control panel to access the menu for the diagnostic tools and select to run the tools. Download the results to a laptop or view the results on the control panel display. Due to the size of the results, it might be easier to use a laptop to view the results and save them for later use.

Once you determine that the power connection board is defective and you order the replacement, the replacement part is shipped to your location. The part arrives in a carton but do not open it before reviewing the shipping label on the outside of the box. Make sure the label matches the model number you ordered and also it is good practice to record the serial number and catalog number and attach that information to the manual for the board.

","meta_title":"Industrial Power Connect Card Module","meta_description":"Industrial Power Connect Card Module","keywords":"Industrial Power Connect Card Module","series_page_description":"Industrial Power Connect Card Module","quote_description":null,"inventory_notes":"no box","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1882,"product_id":14068,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14069,"part_number":"531X122PCNACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Connect Card","short_desc":"GE Power Connection Board 531X122PCNACG1","content":"

The GE Power Connection Board 531X122PCNACG1 is a renewal part for multiple original equipment power connection boards. The 531X122PCNACG1 board can only be inserted into the drive by a qualified servicer. The servicer must know the general guidelines for working around high-energy equipment but the servicer also must know specific information about how the drive was installed and specific information about the cabling in the site.

The site must be equipped with emergency shutoffs for the drive and all other equipment. This is to cut all power to the equipment in case of an emergency situation. And the shutoff must be located within a specific distance from the device for easy reach when needed to be thrown. Also different designs are available that require different actions to activate the shutoff. For example, the servicer has to pull down on a lever, turn a key, or press a button. The servicer must locate the shutoff, verify that it shutoffs off the power to the right drive, and understand how to activate it before starting the procedure.

The servicer can never work alone on the drive without having an assistant, helper, associate, or electrician nearby to help if an emergency or accident occurs. Due to risk from high-voltages and the moving parts in a drive, it is standard practice to have someone nearby.

The site might have a wet floor from chemicals or water due to the normal operations in the site. Use a vacuum, mop, or other device to dry the floor completely before starting.

","meta_title":"Power Connect Card","meta_description":"Power Connect Card","keywords":"Power Connect Card","series_page_description":"Power Connect Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1881,"product_id":14069,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14070,"part_number":"531X122PCNAEG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER CONNECT CARD","short_desc":"GE Power Connection Board 531X122PCNAEG1","content":"

The GE Power Connection Board 531X122PCNAEG1 is a renewal part for multiple original equipment power connection boards. Signal cables and power cables are connected to the 531X122PCNAEG1 board and when you switch out the board you must connect the cables to the right connectors and not damage any of the cables in the process.

Write down the connector identifiers to which the cables are connected on the board and attach the information to the cables. This provides a record of where to attach the cables on the renewal board. If the replacement board is a newer version of the same board the factory might have changed the location of the connectors but that doesn’t mean the boards are incompatible or don’t behave the same in the drive. Compatibility is designed and tested in the new board. The board is tested in all the drives for which it is a replacement so you can consider it a duplicate board.

Pull the new board out of the protective bag and hold it only by the edges to guard against damage to the components. Then carefully hold one cable by the connector and pull if from the old board. Then, push it directly into the matching connector on the new board.

Open all the locking tabs that secure the board in the drive and carefully remove the defective board. Hold the new board level and position yourself to have a clear view of the board. Without touching any other boards or objects in the drive, insert the board.

","meta_title":"GE POWER CONNECT CARD","meta_description":"GE POWER CONNECT CARD","keywords":"GE POWER CONNECT CARD","series_page_description":"GE POWER CONNECT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14071,"part_number":"531X122PCNAHG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Driver Board","short_desc":"GE Power Connection Board 531X122PCNAHG1","content":"

The GE Power Connection Board 531X122PCNAHG1 is a renewal part for multiple original equipment power connection boards. Sometimes it becomes necessary to remove, replace, or relocate components on the 531X122PCNAHG1 board from one version of the board to the next version. If you find that a jumper or connector or other components are missing on the replacement board, refer to the information that comes with the board for instructions. The board is tested thoroughly before release and all discrepancies are evaluated and the workarounds are go through a careful analysis.

Only two jumpers on the 531X122PCNAHG1 board are used for configuration purposes but to use the board, the jumpers must be set. The jumpers configure the board to output the voltage range required for your drive. Find your drive model in the 531X122PCNAHG1 board manual and it lists the jumper settings for the drive. Each jumper has 7 pins and when you insert the jumpers over the right pins, it defines the voltages for your drive.

The procedure for changing the jumper positions is straightforward but requires you to follow some guidelines. When the board is delivered to you it is packaged in a protective bag that prevents the buildup of static. Keep the board in the bag and it is best to leave it in the box until you install it. Pull the board out and place the bag on a clean surface like a workbench or desk. Use your hands or pliers to remove the jumpers from the factory settings. Carefully insert the jumpers in the pins for your drive.

","meta_title":"PC Driver Board","meta_description":"PC Driver Board","keywords":"PC Driver Board","series_page_description":"PC Driver Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1880,"product_id":14071,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14072,"part_number":"531X122PCNAKG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"POWER CONNECT CD GE VA-4","short_desc":"GE Power Connection Board 531X122PCNAKG1","content":"

The GE Power Connection Board 531X122PCNAKG1 is a renewal part for multiple original equipment power connection boards. The 531X122PCNAKG1 board can be harmed by a buildup of static in the board or unreliable operation is possible. There are guidelines that apply to all electronic equipment that can be followed to prevent problems.

A wrist strap is a requirement for when you touch or in anyway work on the board. Some workbenches have a connector into which you can plug a wrist strap. Others require you to clip the wrist strap to an unpainted metal surface. In either case the concept is the same that any static drains from your body to the grounded metal of the bench or other metal surface.

Most importantly, leave the board in the protective bag and don’t touch it unless necessary and don’t carry it around. Best practice is to leave it in the shipping box until you need it.

When you are ready to install it, lay the bag on a table, desk, or work bench and place the board on it. Move the jumpers as required for your board using the instructions in the documentation that comes with the board. Pick up the board by the edges and move any cables from the old board to the new board. Unlock the old board from the drive cabinet and switch out the boards. Lock the new board in place and lock the cabinet door. Startup the 3-phase power supply and start the drive.

","meta_title":"POWER CONNECT CD GE VA-6","meta_description":"POWER CONNECT CD GE VA-7","keywords":"POWER CONNECT CD GE VA-8","series_page_description":"POWER CONNECT CD GE VA-4","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14073,"part_number":"531X122PCNALG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Connect Card","short_desc":"GE Power Connection Board 531X122PCNALG1","content":"

The GE Power Connection Board 531X122PCNALG1 is a renewal part for multiple original equipment power connection boards. To enable the GE Power Connection Board 531X122PCNALG1 to be compatible with multiple original boards that it can replace, you must set two jumpers. The jumpers are JP1 and JP2 and they configure the DC armature voltage range. To set the G1 voltage at 500 VDC and the G2 at 700 VDC you leave the jumper pins uncovered and you can save the jumper for future use. To configure the G1 voltage at 240 VDC and the G2 voltage at 550 VDC, insert one jumper over pins P3 and P4. For JP2, insert the jumper over pins P5 and P6.

To replace the existing board, you first must disconnect all power to the drive. You might want to confer with someone familiar with the installation to ensure that all power is disconnected. If you don’t disconnect all power, a serious risk of electric shock, electric burns, or damage to equipment exists.

Before you start to work on the drive and the boards, make sure you have a grounding strap available to protect the board from the buildup of static electricity. One end of the strap is clipped to the workbench on an unpainted metal surface. The other end is wrapped around your arm. In this way, any static electricity finds its way to the grounded workbench or other metal surface.

Carefully note all cables that are connected to the defective board and create labels you can attach to the cable that identify the connectors.

","meta_title":"Connect Card","meta_description":"Connect Card","keywords":"Connect Card","series_page_description":"Connect Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1879,"product_id":14073,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14074,"part_number":"531X122PCNALG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER CONNECT BOARD","short_desc":"GE Power Connection Board 531X122PCNALG2","content":"

The GE Power Connection Board 531X122PCNALG2 is a renewal part for multiple original equipment power connection boards. Before you can install the board, you must configure the board to be compatible with your defective board. The board can be used as a replacement for several boards and it is the configuration of the jumpers that determines if the board is compatible with your drive.

When you work with any electrical devices or printed circuit boards, it is important to plan ahead to limit the buildup of static electricity. First, you’ll notice that the replacement board you receive comes from the factory in a plastic bag. The plastic bag protects the device from static build up which can damage the board. It is best practice to leave the board in the container in which it shipped and also leave it in the plastic bag. Damage can occur from static and also the components on the board are delicate and might be damaged if handled roughly or even if you press down on them while carrying the board. For this reason, leave the board in the box until you are ready to install it.

When you do handle the board, only carry it from the edges. That is, do not touch any components and press the palms of your hands against the edges of the board. Have a wrist strap on when you install the board. Some wrist straps have a connector that you insert into a connector on a workbench. Other wrist straps have a clip that you attach to the bare metal surface on the workbench.

","meta_title":"GENERAL ELECTRIC POWER CONNECT BOARD","meta_description":"GENERAL ELECTRIC POWER CONNECT BOARD","keywords":"GENERAL ELECTRIC POWER CONNECT BOARD","series_page_description":"GENERAL ELECTRIC POWER CONNECT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14075,"part_number":"531X122PCNAMG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC POWER CONNECT CARD","short_desc":"GE Power Connection Board 531X122PCNAMG1","content":"

The GE Power Connection Board 531X122PCNAMG1 is a renewal part for multiple original equipment power connection boards. To configure the board to be compatible with your drive, jumpers are on the GE Power Connection Board 531X122PCNAMG1 that allow you to configure the board to be identical to the board you are replacing. Use the information that comes with the board to understand how to set the jumpers for your drive. Also, there might be other jumpers that must be set. Carefully review the defective board and set any jumpers in the same position on the new board. Use the jumper identifiers to match the jumpers on the defective board with same jumper on the new board because you might find that the jumpers are located in different locations on the new board.

Also cables might be connected on the old board. Don’t disconnect them until you label them with the connector number and any other useful information. That way, you can easily connect them on the new board easily and quickly.

Care must be taken when you disconnect the cables from the defective board because the cables are delicate and might break if not handled properly. Ribbon cables are made up of multiple fine wires and can easily be disconnected from the connector. Only grasp the ribbon cable from the connector to disconnect it. Use one hand to steady the board and grasp the ribbon cable with the other hand. Then, pull the connector out from the board.

","meta_title":"GENERAL ELECTRIC POWER CONNECT CARD","meta_description":"GENERAL ELECTRIC POWER CONNECT CARD","keywords":"GENERAL ELECTRIC POWER CONNECT CARD","series_page_description":"GENERAL ELECTRIC POWER CONNECT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1878,"product_id":14075,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14077,"part_number":"531X123PCHACG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"POWER CONNECTION PBC CIRCUIT BOARD GE","short_desc":"GE Power Connection Board 531X123PCHACG1","content":"

The GE Power Connection Board 531X123PCHACG1 is a renewal part for multiple original equipment power connection boards. The GE Power Connection Board 531X123PCHACG1 is installed in a drive which is a high-voltage device and care must be taken before you start the replacement procedure. Before you begin check the area surrounding the drive for unsafe conditions. Look for wet floors, ungrounded electrical outlets, and missing safety ground connections. Inspect the tools you plan to use and use only hand tools that are approved for electrical environments. Look for missing or worn insulation. Also, some unapproved hand tools appear to be insulated but the insulating material is not approved for electrical work.

If you plan to use testing devices, inspect that equipment also. Make sure it is in good working condition and be sure to configure the device properly for the testing you plan to perform.

Locate all the emergency power-off switches associated with the drive and all other devices in the area. If emergency switches are not available, you might find only a disconnecting switch. Make sure you have easy access to the switches in case of emergency.

It is best practice to not perform the replacement procedure alone. Always work with another individual that is familiar with the work you are doing and can seek help if an accident occurs. Also, it is best to become familiar with the electrical wiring used to supply power to the drive. Only then can you be sure that all power is disconnected from the drive.

","meta_title":"POWER CONNECTION PBC CIRCUIT BOARD GE","meta_description":"POWER CONNECTION PBC CIRCUIT BOARD GE","keywords":"POWER CONNECTION PBC CIRCUIT BOARD GE","series_page_description":"POWER CONNECTION PBC CIRCUIT BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14078,"part_number":"531X123PCHACG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 Interface Card PLC","short_desc":"GE Power Connection Board 531X123PCHACG2","content":"

The GE Power Connection Board 531X123PCHACG2 is a renewal part for multiple original equipment power connection boards. When you replace a defective board with the GE Power Connection Board 531X123PCHACG2, there are guidelines you must follow to ensure that static buildup does not occur. Static can harm the components on a printed circuit board. When you receive the board from the factory it comes in a container that protects the device from rough treatment that might occur during shipment.

Look for evidence that the device received damage during shipment. Inspect the box for dents, rips, and signs that liquids were spilled or dripped on the box. The box has a label attached that describes the model number and other identifying information and make sure it matches the model you ordered. Write down the model number, serial number, catalog number and other information and keep the information in a safe place for future use. If you need to call for service, provide the information to customer service to ensure you receive accurate and fast assistance.

Cut through the tamper proof tape that serves to protect the board and open the box. Collect the written materials supplied with the board. You might find warranty information, installation manuals, customer support information, and other valuable documentation. Put the written material in a safe place.

Notice that the board is wrapped in a static protecting bag and it is best practice to keep it in the bag. However, with the board still in the bag locate the model number on the board and verify that it matches the model you ordered.

","meta_title":"VA-4 Interface Card PLC","meta_description":"VA-4 Interface Card PLC","keywords":"VA-4 Interface Card PLC","series_page_description":"VA-4 Interface Card PLC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1877,"product_id":14078,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14079,"part_number":"531X124MSDAAG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC SUPPRESSION GE CARD","short_desc":null,"content":"

The 531X124MSDAAG1 is a suppressor circuit board produced by General Electric. The 531X124MSDAAG1 is a small circuit board without a whole lot to it. The 531X124MSDAAG1 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDAAG1 has four metal prongs scattered around the circuit board. The 531X124MSDAAG1 has six large dark colored resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDAAG1 has a large transformer. A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" in a second coil. The transformer has three black wires. Two wires are thick and one is very thin. The thin wire is anchored to the circuit board, while the other two thicker wires are not. The two thick wires do have circular eyelets with a red connector at the end. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border.

Please call AX Control with any further questions.

","meta_title":"MFC SUPPRESSION GE CARD","meta_description":"MFC SUPPRESSION GE CARD","keywords":"MFC SUPPRESSION GE CARD","series_page_description":"MFC SUPPRESSION GE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-21 12:09:11","prod_pdf":[]},{"id":14080,"part_number":"531X124MSDADG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC SUPPRESSION BOARD GENERAL ELECTRIC","short_desc":null,"content":"

The 531X124MSDADG1 is a suppressor circuit board produced by General Electric. The 531X124MSDADG1 is a small circuit board without a whole lot to it. The 531X124MSDADG1 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDADG1 has four metal prongs scattered around the circuit board. The 531X124MSDADG1 has four large pale blue resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDADG1 has two long black resistors and two large silver resistors that are secured to the circuit board using zip ties. The 531X124MSDADG1 has a large transformer. A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" in a second coil. The transformer has three black wires. Two wires are thick and one is very thin. The thin wire is anchored to the circuit board, while the other two thicker wires are not. The two thick wires do have circular eyelets with a red connector at the end. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border.

Please call AX Control with any further questions.

","meta_title":"MFC SUPPRESSION BOARD GENERAL ELECTRIC","meta_description":"MFC SUPPRESSION BOARD GENERAL ELECTRIC","keywords":"MFC SUPPRESSION BOARD GENERAL ELECTRIC","series_page_description":"MFC SUPPRESSION BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"36A305231AAG01","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:31:07","prod_pdf":[]},{"id":14081,"part_number":"531X124MSDAGG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MFC SUPPRESSION CARD","short_desc":null,"content":"

The 531X124MSDAGG1 is a suppressor circuit board produced by General Electric. The 531X124MSDAGG1 is a small circuit board without a whole lot to it. The 531X124MSDAGG1 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDAGG1 has four metal prongs scattered around the circuit board. The 531X124MSDAGG1 has four large light blue resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDAGG1 has two large silver resistors and one long black resistor. The 531X124MSDAGG1 has a large transformer. A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" in a second coil. The transformer has three black wires. Two wires are thick and one is very thin. The thin wire is anchored to the circuit board, while the other two thicker wires are not. The two thick wires do have circular eyelets with a red connector at the end. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border.

Please call AX Control with any further questions.

","meta_title":"GE MFC SUPPRESSION CARD","meta_description":"GE MFC SUPPRESSION CARD","keywords":"GE MFC SUPPRESSION CARD","series_page_description":"GE MFC SUPPRESSION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:31:47","prod_pdf":[]},{"id":14082,"part_number":"531X124MSDAGG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PCB GENERAL ELECTRIC","short_desc":null,"content":"

The 531X124MSDAGG2 is a suppressor circuit board produced by General Electric. The 531X124MSDAGG2 is a small circuit board without a whole lot to it. The 531X124MSDAGG2 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDAGG2 has four metal prongs scattered around the circuit board. The 531X124MSDAGG2 has four large light blue resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDAGG2 has two large silver resistors and one long slender silver resistors. The two large silver resistors are secured to the circuit board with zip ties. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border. Each component is outlined with a thin white line. Every component is labeled with a combination of letters and numbers for easy identification. The part number (531X124MSDAGG2), the manufacturer (General Electric), and the type of circuit board (VA-5 MFC SUPPRESSION) is printed on the front.

Please call AX Control with any further questions.

**General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.

","meta_title":"PCB GENERAL ELECTRIC","meta_description":"PCB GENERAL ELECTRIC","keywords":"PCB GENERAL ELECTRIC","series_page_description":"PCB GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:32:44","prod_pdf":[]},{"id":14083,"part_number":"531X124MSDAHG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC SUPPRESSION BOARD","short_desc":null,"content":"

The 531X124MSDAHG1 is a suppressor circuit board produced by General Electric. The 531X124MSDAHG1 is a small circuit board without a whole lot to it. The 531X124MSDAHG1 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDAHG1 has four metal prongs scattered around the circuit board. The 531X124MSDAHG1 has four large light blue resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDAHG1 has two large gold resistors and two long white resistors. The 531X124MSDAHG1 has a large transformer. A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" in a second coil. The transformer has three black wires. Two wires are thick and one is very thin. The thin wire is anchored to the circuit board, while the other two thicker wires are not. The two thick wires do have circular eyelets with a red connector at the end. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border.

Please call AX Control with any further questions.

","meta_title":"MFC SUPPRESSION BOARD","meta_description":"MFC SUPPRESSION BOARD","keywords":"MFC SUPPRESSION BOARD","series_page_description":"MFC SUPPRESSION BOARD","quote_description":null,"inventory_notes":"36c774345BAG01","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:33:23","prod_pdf":[]},{"id":14084,"part_number":"531X124MSDAHG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SUPPRESSION BOARD","short_desc":null,"content":"

The 531X124MSDAHG2 is a suppression circuit board. This circuit board is made by General Electric. The 531X124MSDAHG2 is a smaller circuit board with only a few components. The 531X124MSDAHG2 has three large red circular polyester capacitors. The capacitors create an electric field that is used to store additional energy. The 531X124MSDAHG2 has four small light blue stripped resistors, two medium white resistors, and two large silver resistors. The stripped resistors have colored bands that correspond with a colored code. Each color strip has a match within the code that gives it a number value. This number value is then used within an equation to calculate the amount of energy they can restrict. The white and silver resistors have the amount of energy they can restrict printed on the sides. The 531X124MSDAHG2 has five thin metal prongs scattered around the circuit board. The 531X124MSDAHG2 has two small prongs with a white plastic connector. The 531X124MSDAHG2 also has two small thing circular ports. The 531X124MSDAHG2 has four metal rimmed circles. The 531X124MSDAHG2 also has six open circles with no edges. Each component is outlined and labeled with a corresponding number and letter. The part number (531X124MSDAHG2) is printed on the circuit board, along with General Electric’s emblem. MFC Suppression is also printed in the center of the circuit board.

If you would like more information about the 531X124MSDAHG2 or any another product offered by AX Control, please call the skilled staff today.

","meta_title":"GE SUPPRESSION BOARD","meta_description":"GE SUPPRESSION BOARD","keywords":"GE SUPPRESSION BOARD","series_page_description":"GE SUPPRESSION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:33:56","prod_pdf":[]},{"id":14085,"part_number":"531X124MSDAJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC Suppression Card PCB","short_desc":null,"content":"

The 531X124MSDAJG1 is a suppressor circuit board produced by General Electric. The 531X124MSDAJG1 is a small circuit board without a whole lot to it. The 531X124MSDAJG1 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDAJG1 has four metal prongs scattered around the circuit board. The 531X124MSDAJG1 has six large dark colored resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDAJG1 has a large transformer. A transformer is a static electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" in a second coil. The transformer has three black wires. Two wires are thick and one is very thin. The thin wire is anchored to the circuit board, while the other two thicker wires are not. The two thick wires do have circular eyelets with a red connector at the end. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border.

Please call AX Control with any further questions.

","meta_title":"MFC Suppression Card PCB","meta_description":"MFC Suppression Card PCB","keywords":"MFC Suppression Card PCB","series_page_description":"MFC Suppression Card PCB","quote_description":null,"inventory_notes":"36C774345AAG01","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:34:24","prod_pdf":[{"id":1876,"product_id":14085,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":16796,"part_number":"531X124MSDAJG2","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MFC Suppression Card PCB","short_desc":"The 531X124MSDAJG2 is a GE MFC Suppression Board","content":"

531X124MSDAJG2--MFC Suppression Board

The 531X124MSDAJG2 is a smaller board component manufactured by GE to fit into their general purpose drive systems like the DC-300.

The 531X124MSDAJG2 is an MFC Suppression Board. This is only one of several versions of this board. The 531X124MSDAJG2 is a small, rectangular board that is built with multiple cutouts and drill holes. The center of the board has four round cutouts that are ringed with a conductive material; each of these is labeled as AF, DW, DZ, and KF. There are two additional round cutouts and one oblong cutout. These are marked DX, DY, and GF.

The 531X124MSDAJG2 has three metal oxide varistors. MOVs are used for over-voltage protection from transient surges using voltage-clamping, in the same way a Zener diode might. The board has four stab-on connectors that are located along the top edge of the board. These are labeled K1 through K4. The board has a single two-pin header connector and two terminal pin connectors. The terminal pin connectors are located in the bottom left corner.

Other components on the 531X124MSDAJG2 include two capacitors that each have a zip tie adding support and connection to the board. It has two wire wound resistors. There are also four metal film resistors. The board has a single transformer. This component uses surface wiring to connect to various other components on the board.

If more information about the 531X124MSDAJG2 MFC Suppression Board is needed, please refer to series user guides, data sheets, or manuals. Technical support for this series was originally provided by GE.

The 531X125SNHAAG1 is a Snubber board produced by General Electric. The 531X125SNHAAG1 is a very small circuit board with very few parts. The 531X125SNHAAG1 has one small orange polyester capacitor and a very large silver capacitor. A capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X125SNHAAG1 has one small white circular diode. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X125SNHAAG1 has one dark blue resistor. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The large capacitor is labeled C1. The small circular orange capacitor is labeled C2. The diode is labeled D1. The resistor is labeled R1. There are two circular holes in the center of the circuit board with metal around them. The first hole (closest to the diode) is labeled P1 and the second circle is labeled N. There is a section of black wire that is labeled J1.

Please contact AX Control today for all your automation needs.

","meta_title":"GE SNUBBER BOARD","meta_description":"GE SNUBBER BOARD","keywords":"GE SNUBBER BOARD","series_page_description":"GE SNUBBER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:35:12","prod_pdf":[]},{"id":14087,"part_number":"531X125SNHAFG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC SNUBBER CARD","short_desc":null,"content":"

The 531X125SNHAFG1 is a Snubber board produced by General Electric. The 531X125SNHAFG1 is a very small circuit board with very few parts. The 531X125SNHAFG1 has one small orange polyester capacitor and a very large silver capacitor. A capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X125SNHAFG1 has one small white circular diode. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X125SNHAFG1 has one dark blue resistor. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The large capacitor is labeled C1. The small circular orange capacitor is labeled C2. The diode is labeled D1. The resistor is labeled R1. There are two circular holes in the center of the circuit board with metal around them. The first hole (closest to the diode) is labeled P1 and the second circle is labeled N. There is a section of black wire that is labeled J1.

Please contact AX Control today for all your automation needs.

","meta_title":"GENERAL ELECTRIC SNUBBER CARD","meta_description":"GENERAL ELECTRIC SNUBBER CARD","keywords":"GENERAL ELECTRIC SNUBBER CARD","series_page_description":"GENERAL ELECTRIC SNUBBER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:35:53","prod_pdf":[]},{"id":14088,"part_number":"531X125SNHAFG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC SNUBBER BOARD","short_desc":null,"content":"

The 531X125SNHAFG2 is a Snubber board produced by General Electric. The 531X125SNHAFG1 is a very small circuit board with very few parts. The 531X125SNHAFG1 has one small orange polyester capacitor and a very large silver capacitor. A capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X125SNHAFG1 has three small black and silver diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X125SNHAFG1 has one black resistor. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The large capacitor is labeled C1. The small circular orange capacitor is labeled C2. The diodes are labeled D1, D2, and D3. The resistor is labeled R1. There are two circular holes in the center of the circuit board with metal around them. The first hole (closest to the diode) is labeled N2 and the second circle is labeled CT. There is a small metal tab that stands vertically labeled P1.

Please contact AX Control for a quote.

","meta_title":"GENERAL ELECTRIC SNUBBER BOARD","meta_description":"GENERAL ELECTRIC SNUBBER BOARD","keywords":"GENERAL ELECTRIC SNUBBER BOARD","series_page_description":"GENERAL ELECTRIC SNUBBER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:36:49","prod_pdf":[]},{"id":14089,"part_number":"531X126SNDAAG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"SNUBBER GE BOARD","short_desc":null,"content":"

The 531X126SNDAAG2 is a Snubber Card from General Electric. The 531X126SNDAAG2 has twenty-four long black resistors with the resistor equation printed on the side of each one in white. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The 531X126SNDAAG2 has fifteen metal tabs that stand vertically scattered throughout the circuit board. The 531X126SNDAAG2 has twelve sets of male terminals with white plastic bases and backing. Each male terminal is made up of four thin metal prongs. These male terminals allow for the 531X126SNDAAG2 to be attached to the surrounding circuit boards. The 531X126SNDAAG2 has seven sections of black wire (six long of equal length and one short). The long sections of black wire are placed in pairs while the short section of black wire is on its own. The 531X126SNDAAG2 has one small black square transistor. A transistor is a semi-conductive device that is used to switch or amplify electrical power or electronic signals. Transistors can be identified by the three connection points they have with the circuit board. The part number (531X126SNDAAG2) the type of board (SNUBBER CARD) and the manufactures logo (General Electric) are all printed on the face of the circuit board, along with +SV-1.

If you would like additional information about the 531X126SNDAAG2 please contact AX Control.

","meta_title":"SNUBBER GE BOARD","meta_description":"SNUBBER GE BOARD","keywords":"SNUBBER GE BOARD","series_page_description":"SNUBBER GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:37:17","prod_pdf":[]},{"id":14090,"part_number":"531X126SNDABG1 ","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SNUBBER CARD","short_desc":"","content":null,"meta_title":"GE SNUBBER CARD","meta_description":"GE SNUBBER CARD","keywords":"GE SNUBBER CARD","series_page_description":"GE SNUBBER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14091,"part_number":"531X126SNDACG1 ","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC SNUBBER BOARD","short_desc":null,"content":"

The 531X126SNDACG1 is a Snubber Card from General Electric. The 531X126SNDACG1 has fourteen metal tabs that stand vertically scattered throughout the circuit board. The 531X126SNDACG1 has twelve sets of male terminals with white plastic bases and backing. Each male terminal is made up of four thin metal prongs. These male terminals allow for the 531X126SNDACG1 to be attached to the surrounding circuit boards. The 531X126SNDACG1 has one small black square transistor. A transistor is a semi-conductive device that is used to switch or amplify electrical power or electronic signals. Transistors can be identified by the three connection points they have with the circuit board. The 531X126SNDACG1 has twenty-four long black resistors with the resistor equation printed on the side of each one in white. The 531X126SNDACG1 also has six large silver resistors with the resistor equation printed on the side. The silver resistors are so large they are zip tied to the circuit board. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The part number (531X126SNDACG1) the type of board (SNUBBER CARD) and the manufactures logo (General Electric) are all printed on the face of the circuit board, along with +SV-1.

If you would like additional information about the 531X126SNDACG1, or a price quote on the 531X126SNDACG1 please contact AX Control’s professional staff.

","meta_title":"GENERAL ELECTRIC SNUBBER BOARD","meta_description":"GENERAL ELECTRIC SNUBBER BOARD","keywords":"GENERAL ELECTRIC SNUBBER BOARD","series_page_description":"GENERAL ELECTRIC SNUBBER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:38:05","prod_pdf":[]},{"id":14092,"part_number":"531X126SNDADG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SNUBBER PCB CARD","short_desc":null,"content":"

The 531X126SNDADG1 is a Snubber Card from General Electric. The 531X126SNDADG1 has one small black square transistor. A transistor is a semi-conductive device that is used to switch or amplify electrical power or electronic signals. Transistors can be identified by the three connection points they have with the circuit board. The 531X126SNDADG1 has twelve sets of male terminals with white plastic bases and backing. Each male terminal is made up of four thin metal prongs. These male terminals allow for the 531X126SNDADG1 to be attached to the surrounding circuit boards. The 531X126SNDADG1 has fourteen metal tabs that stand vertically scattered throughout the circuit board. The 531X126SNDADG1 has twenty-four long black resistors with the resistor equation printed on the side of each one in white. The 531X126SNDADG1 also has six large silver resistors with the resistor equation printed on the side. The silver resistors are so large they are zip tied to the circuit board. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The part number (531X126SNDADG1) the type of board (SNUBBER CARD) and the manufactures logo (General Electric) are all printed on the face of the circuit board, along with +SV-1.

If you would like additional information about the 531X126SNDADG1, or a price quote on the 531X126SNDADG1 please contact AX Control’s professional staff.

","meta_title":"GE SNUBBER PCB CARD","meta_description":"GE SNUBBER PCB CARD","keywords":"GE SNUBBER PCB CARD","series_page_description":"GE SNUBBER PCB CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:38:33","prod_pdf":[]},{"id":14093,"part_number":"531X126SNDAEG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SNUBBER PCB","short_desc":null,"content":"

The 531X126SNDAEG1 is a Snubber Card from General Electric. The part number (531X126SNDAEG1) the type of board (SNUBBER CARD) and the manufactures logo (General Electric) are all printed on the face of the circuit board, along with +SV-1. The 531X126SNDAEG1 has twelve sets of male terminals with white plastic bases and backing. Each male terminal is made up of four thin metal prongs. These male terminals allow for the 531X126SNDAEG1 to be attached to the surrounding circuit boards. The 531X126SNDAEG1 has one small black square transistor. A transistor is a semi-conductive device that is used to switch or amplify electrical power or electronic signals. Transistors can be identified by the three connection points they have with the circuit board. The 531X126SNDAEG1 has fourteen metal tabs that stand vertically scattered throughout the circuit board. The 531X126SNDAEG1 has six large silver resistors with the resistor equation printed on the side. The silver resistors are so large they are zip tied to the circuit board. The 531X126SNDAEG1 has twenty-four long black resistors with the resistor equation printed on the side of each one in white. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses.

If you would like additional information about the 531X126SNDAEG1, or a price quote on the 531X126SNDAEG1 please contact AX Control’s professional staff.

","meta_title":"GE SNUBBER PCB","meta_description":"GE SNUBBER PCB","keywords":"GE SNUBBER PCB","series_page_description":"GE SNUBBER PCB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:39:18","prod_pdf":[]},{"id":14094,"part_number":"531X126SNDAFG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Snubber Card Module","short_desc":null,"content":"

The 531X126SNDAFG1 is a Snubber Card from General Electric. The part number (531X126SNDAFG1) the type of board (SNUBBER CARD) and the manufactures logo (General Electric) are all printed on the face of the circuit board, along with +SV-1. The 531X126SNDAFG1 has one small black square transistor. A transistor is a semi-conductive device that is used to switch or amplify electrical power or electronic signals. Transistors can be identified by the three connection points they have with the circuit board. The 531X126SNDAFG1 has fourteen metal tabs that stand vertically scattered throughout the circuit board. The 531X126SNDAFG1 has twelve sets of male terminals with white plastic bases and backing. Each male terminal is made up of four thin metal prongs. These male terminals allow for the 531X126SNDAFG1 to be attached to the surrounding circuit boards. The 531X126SNDAFG1 has six large silver resistors with the resistor equation printed on the side. The silver resistors are so large they are zip tied to the circuit board. The 531X126SNDAFG1 has twenty-four long black resistors with the resistor equation printed on the side of each one in white. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses.

If you would like additional information about the 531X126SNDAFG1, or a price quote on the 531X126SNDAFG1 please contact AX Control’s professional staff.

","meta_title":"Snubber Card Module","meta_description":"Snubber Card Module","keywords":"Snubber Card Module","series_page_description":"Snubber Card Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:39:56","prod_pdf":[{"id":1875,"product_id":14094,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14095,"part_number":"531X128HMSACG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MOV CARD","short_desc":null,"content":"

The 531X128HMSACG2 is a VA-4 MOV Card from General Electric. The 531X128HMSACG2 is used for many industrial applications. The 531X series by General Electric is an obsolete circuit board, however, AX Control carries them for easy replacement in an older system. The 531X128HMSACG2 has nine dark brown resistors with multiple colored bands. The bands on the resistors correspond with a color code, that allows an experienced employee to know how to best use the circuit board. The 531X128HMSACG2 has eight small black and silver diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X128HMSACG2 has one small red LED (light emitting diodes) which illuminates as an energy current passes through it. The 531X128HMSACG2 has fifteen vertical metal prongs around the circuit board. The 531X128HMSACG2 has three areas for large-sized fuses. The 531X128HMSACG2 has one large yellow polypropylene capacitor. Also referred to as a condenser. The condensers are so large that it is zip tied to the circuit board, for extra security. The condenser is used to store energy in an electrical field. The 531X128HMSACG2 can be secured in place with the four holes (one in each corner), or used as a daughter board based on how your system is set up.

Please call AX Control today.

","meta_title":"GE MOV CARD","meta_description":"GE MOV CARD","keywords":"GE MOV CARD","series_page_description":"GE MOV CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 14:30:43","prod_pdf":[]},{"id":16443,"part_number":"531X128HMSADG","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PC MOV SUPP BOARD","short_desc":null,"content":"

The 531X128HMSADG is a VA-4 MOV Card. The 531X128HMSADG is a product of General Electric. The 531X128HMSADG has nine dark brown resistors with multiple colored bands. The 531X128HMSADG has fifteen vertical metal prongs around the circuit board. The 531X128HMSADG has three areas for fuses. Fuses are an important safety measure for this circuit board. If the circuit board has to much power flowing through it then the fuse will “blow” (the metal cord inside will break). Once this occurs the fuse will need to be replaced. The 531X128HMSADG has one large yellow polypropylene capacitor. The capacitor is so large that it is zip tied to the circuit board, for extra security. Capacitors also referred to as condensers in some literature, creates an electrical field which is used to store additional energy. Using capacitors to store the energy limit the amount of energy the circuit board loses during the storing process. The 531X128HMSADG has eight small black and silver diodes. Diodes are considered an electronic version of a check valve or a one way street. They only allow energy to flow in a single direction. The 531X128HMSADG has one small red LED (light emitting diodes) which illuminates as an energy current passes through it.

Please contact AX Control today by either phone or email for additional information.

**The 531X128HMSADG is considered an obsolete part.

","meta_title":"GENERAL ELECTRIC PC MOV SUPP BOARD","meta_description":"GENERAL ELECTRIC PC MOV SUPP BOARD","keywords":"GENERAL ELECTRIC PC MOV SUPP BOARD","series_page_description":"GENERAL ELECTRIC PC MOV SUPP BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 09:03:36","prod_pdf":[]},{"id":14096,"part_number":"531X128HMSADG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 MOV GE CARD","short_desc":null,"content":"

The 531X128HMSADG2 is a VA-4 MOV Card from General Electric. The 531X128HMSADG2 is for industrial use and is considered an obsolete part. The 531X128HMSADG2 has nine dark brown resistors. The 531X128HMSADG2 has fifteen vertical metal prongs around the circuit board. The 531X128HMSADG2 has three areas for fuses. The fuses are a self-sacrificing component that protects the circuit board from unexpected power surges. If a power surge occurs the metal connector inside the fuse will break there for stopping the current flow from reaching the rest of the circuit board. After this occurs the fuse will need to be replaced. The 531X128HMSADG2 has one large yellow polypropylene capacitor. The capacitor is so large that it is secured to the circuit board with a zip tie. Capacitors house additional energy in an electrical field that they create. The 531X128HMSADG2 has eight small black and silver diodes. The energy flows through the diode toward the silver side of the diode. The 531X128HMSADG2 has one small red LED (light emitting diodes) which illuminates as an energy current passes through it. AX Control strives to be your first and last stop for all of your automation needs. Here at AX Control, we specialize in the hard to find or obsolete parts in the Automation industry.

Please call or email the staff at AX Control today.

","meta_title":"VA-4 MOV GE CARD","meta_description":"VA-4 MOV GE CARD","keywords":"VA-4 MOV GE CARD","series_page_description":"VA-4 MOV GE CARD","quote_description":null,"inventory_notes":"NO BOX","cross_reference":"","created_at":null,"updated_at":"2018-11-28 11:17:38","prod_pdf":[]},{"id":14097,"part_number":"531X128HMSAGG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC MOV CARD","short_desc":null,"content":"

The 531X128HMSAGG1 is a VA-4 MOV Card from General Electric. The 531X128HMSAGG1 has nine dark brown resistors with multiple colored bands. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The bands on the resistors correspond with a color code. Each colored band corresponds with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The 531X128HMSAGG1 has fifteen vertical metal prongs around the circuit board. The 531X128HMSAGG1 has three areas for fuses. The 531X128HMSAGG1 has one large yellow polypropylene capacitor. The capacitor is so large that it is zip tied to the circuit board. Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X128HMSAGG1 has eight small black and silver diodes. The diodes control the flow of energy by having a low resistance in one direction and a high resistance in the opposite direction. The 531X128HMSAGG1 has one small red LED (light emitting diodes) which illuminates as an energy current passes through it. The 531X128HMSAGG1 has three large red squares that attach to the back of the circuit board. Each red square has two wires coming off each that connect to the vertical metal tabs.

Please call AX Control today.

","meta_title":"GENERAL ELECTRIC MOV CARD","meta_description":"GENERAL ELECTRIC MOV CARD","keywords":"GENERAL ELECTRIC MOV CARD","series_page_description":"GENERAL ELECTRIC MOV CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:42:54","prod_pdf":[]},{"id":14098,"part_number":"531X129SNCADG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SNUBBER CARD","short_desc":"","content":null,"meta_title":"GE SNUBBER CARD","meta_description":"GE SNUBBER CARD","keywords":"GE SNUBBER CARD","series_page_description":"GE SNUBBER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14099,"part_number":"531X129SNCG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"SNUBBER CARD 75-125HP","short_desc":null,"content":"

The 531X129SNCG1 is a snubber card by General Electric. The 531X129SNCG1 has eight small black diodes with a silver line near the cathode. The 531X129SNCG1 has five long black resistors and four huge thick silver resistors. These nine resistors all have the amount of energy they can restrict printed on the side of them. The large silver resistors are so large they are zip tied to the circuit board. The 531X129SNCG1 has a long length of black wire on the circuit board behind the huge silver resistors, and a small length of black wire on the circuit board in front of the huge silver resistors. In the center of the circuit board is four pre-drilled holes with metal brackets over them. Each section of the circuit board has an outline in green around the attached components. Every component is labeled in green with a combination of letters and numbers. The circuit board part number (531X129SNCG1) is printed on the face of the circuit board along with where it was made (U. S. A.) and has General Electric’s stamp. The circuit board also has what type of board (SNUBBER CARD //75-125HP) it is printed on the face.

If you would like more information about the 531X124MSDAHG2 or any another product offered by AX Control, please call the skilled staff today.

","meta_title":"SNUBBER CARD 75-125HP","meta_description":"SNUBBER CARD 75-125HP","keywords":"SNUBBER CARD 75-125HP","series_page_description":"SNUBBER CARD 75-125HP","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 15:43:32","prod_pdf":[]},{"id":14101,"part_number":"531X132APGAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"APPLICATION CARD 006/0 GE","short_desc":null,"content":"

The 531X132APGAAG1 is an Application card produced by General Electric, for industrial use. The 531X132APGAAG1 has nine thin yellow condensers and over eighty-five other types of condensers also referred to as capacitors. As the name implies, they condense energy into an electrical field. The energy that can be used as needed. The 531X132APGAAG1 has twenty-six various sized microchips. These microchips go by many names such as IC, Integrated Circuits or just a chip. They can be found in a wide spectrum of everyday electronics such as cell phones, calculators, computers, and a variety of other home appliances. The Integrated Circuits hold all the programming for the 531X132APGAAG1 to function. They also can go one step further and are split up into two subgroups based on if they can accept new programming or not. The 531X132APGAAG1 has one-hundred and fourteen resistors. Resistors are used to dispel unused or unneeded energy. Each resistor can only dispel a certain amount of energy. If you need to figure this out, please speak with an experienced engineer. The engineer can also help you find the best place to hook up the circuit board to make sure the power source isn’t too high. The 531X132APGAAG1 also has a combination of other components such as diodes, male terminals, and Variable Resistors. AX Control looks forward to being your one stop shop for everything automation related.

Please call AX Control’s wonderful staff for additional information or a price quote on the 531X132APGAAG1.

*The 531X132APGAAG1 is considered an obsolete circuit board.

","meta_title":"APPLICATION CARD 006/0 GE","meta_description":"APPLICATION CARD 006/0 GE","keywords":"APPLICATION CARD 006/0 GE","series_page_description":"APPLICATION CARD 006/0 GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 16:31:19","prod_pdf":[]},{"id":14102,"part_number":"531X132APGACG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Application Card Industrial Board","short_desc":null,"content":"

The 531X132APGACG1 is an Application card. This Application card is produced by General Electric. General Electric has been a leader in the electrical world since the 1800s. In 1876 Thomas Edison created his own laboratory. In 1879 Thomas-Hudson Electric Company was formed. These two companies merged in 1892 to create General Electric Company. The 531X132APGACG1 is now considered an out of date technology. However, at AX Control we specialize in out of data parts and equipment, in order to cater to older facilities to keep them up and running, without the need for pricey equipment overhauls and replacements. The 531X132APGACG1 also has a combination of components such as diodes which direct energy flow much like a one-way street, male terminals that allow communication and power distribution between circuit boards with a wiring harness, and Variable Resistors that control the amount of energy passing through them. The 531X132APGACG1 has one-hundred and fourteen resistors. The resistors purpose is to convert unneeded energy into heat and release it. The 531X132APGACG1 has twenty-six Integrated Circuits. The Integrated Circuits are small enclosed circuit boards used to house information programming to tell the circuit board its purpose. The 531X132APGACG1 has nine thin yellow capacitors and over eighty-five other types of capacitors.

AX Control’s wonderful staff is available through email or by phone for additional information.

","meta_title":"Application Card Industrial Board","meta_description":"Application Card Industrial Board","keywords":"Application Card Industrial Board","series_page_description":"Application Card Industrial Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 16:28:55","prod_pdf":[{"id":1874,"product_id":14102,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14103,"part_number":"531X133PR0APG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROCESS INTERFACE BOARD","short_desc":"","content":null,"meta_title":"PROCESS INTERFACE BOARD","meta_description":"PROCESS INTERFACE BOARD","keywords":"PROCESS INTERFACE BOARD","series_page_description":"PROCESS INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14104,"part_number":"531X133PROAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROCESS INTERFACE CARD","short_desc":null,"content":"

The 531X133PROAG1 is a Process Interface Card. The 531X133PROAG1 is manufactured by General Electric. General Electric has been in business since 1892 and is considered a leader in industrial manufacturing. The 531X133PROAG1 has three male terminal ports that connect the 531X133PROAG1 to surrounding the circuit boards and allow energy flow and communication between them. The 531X133PROAG1 has seven small blue Variable Resistors also called Potentiometers. The Variable Resistors have a small white circle in the middle that turns to change the amount of energy that flows through them. The 531X133PROAG1 has around one-hundred resistors. The resistors get rid of excess energy by turning it into heat. The markings indicate the amount of energy each resistor can convert. Consult with an experienced engineer and the General Electric manuals for further information. The 531X133PROAG1 has around forty capacitors. Unlike resistors capacitors or sometimes referred to as condensers store electrical energy in an electrical field they create. The 531X133PROAG1 has eleven Integrated Circuits. The Integrated Circuits hold all the programming for the circuit board. The Integrated Circuits (IC) are split into groups based on if they can be re-programmed or not. The 531X133PROAG1 has fifteen Jumper ports. The Jumper ports have orange covers. The Jumper Ports control the flow of energy by the moving the orange covers. Doing this allows control of the smaller individual circuits around the circuit board. The covers act similar to a switch to open or close the circuits.

For additional information please call or email the staff at AX Control.

","meta_title":"GE PROCESS INTERFACE CARD","meta_description":"GE PROCESS INTERFACE CARD","keywords":"GE PROCESS INTERFACE CARD","series_page_description":"GE PROCESS INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 11:53:04","prod_pdf":[]},{"id":14105,"part_number":"531X133PRUAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROCESS INTERFACE GE BOARD","short_desc":"The 531X133PRUAAG1 is a PROCESS INTERFACE GE BOARD","content":"

The 531X133PRUAAG1 is a printed circuit board component manufactured by General Electric as part of the 531x series of replacement boards. This particular board functions as a Process Interface card. The 531x series of PCBs are designed to work across a number of general purpose drives across the GE catalog.

The 531X133PRUAAG1 is a square board with factory made drill holes in each corner. Two opposing corners have an additional drill hole. The board is marked with several codes beyond its identification number and the GE logo. These include marks like 002/2, R02/2, 2984, VA-4, and 44A722455-001. The board was made in the USA.

The 531X133PRUAAG1 is populated by several connectors. This includes a three position terminal strip located in the upper left corner. The board has two vertical pin header connectors. These are located side-by-side near the left board edge. It also has to additional board connectors. These are also vertical (male) connectors of a varying number of pins.

Other components populating the 531X133PRUAAG1 include seven potentiometers, over ten jumper switches, nine integrated circuits, diodes, metal film resistors, and capacitors. Capacitors are made of materials like ceramic and electrolytic material. The board also has a seven-position switch component. Each position is numbered, and one side of this component is marked “open” to help operators easily recognize the proper position of each switch component. Most components are marked with a reference designator for easy identification. More information on the board, its components, and information regarding handling or installation can be accessed through publications from the manufacturer, like manuals and user guides.

","meta_title":"PROCESS INTERFACE GE BOARD","meta_description":"PROCESS INTERFACE GE BOARD","keywords":"PROCESS INTERFACE GE BOARD","series_page_description":"PROCESS INTERFACE GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 08:44:59","prod_pdf":[]},{"id":14106,"part_number":"531X133PRUABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROCESS INTERFACE BOARD","short_desc":"The 531X133PRUABG1 is a GE PROCESS INTERFACE BOARD","content":"

The 531X133PRUABG1 is a PCB component manufactured by the General Electric company. 531x series drives are designed to fit into a wide variety of general purpose drives across the spectrum of GE’s brand. This particular board functions as a Process Interface card.

The 531X133PRUABG1 is designed as a square board with six factory-made drill holes to allow for the mounting of the board. Holes are placed with one per corner and additional hole placed in two opposite diagonal corners. The board is marked with the manufacturer’s logo, its identification number, as well as codes like 44A722455-001 and 002/2.

The 531X133PRUABG1 has multiple connection options. This includes a three-position terminal strip with screw connections and two terminal contacts located just behind it, two vertical pin male board connectors with multiple pins, and two header connectors. The headers are placed side-by-side on the board’s surface. There are also multiple TP test points placed on the board.

The 531X133PRUABG1 has thirteen jumper switches, seven potentiometers, and nine integrated circuits. Integrated circuits include logic ICs and high-performance analog line drivers with fast transition times and high-impedance inputs. It is built with diodes, metal film resistors, and capacitors of varying materials that include electrolytic, ceramic, and polyester vinyl. There is also a seven-position switch that is placed along the top edge of the board.

More information about the 531X133PRUABG1 board, its handling requirements and installation procedures, as well as information about function and maintenance, may be found through publications from the manufacturer that reference this part number.

","meta_title":"GE PROCESS INTERFACE BOARD","meta_description":"GE PROCESS INTERFACE BOARD","keywords":"GE PROCESS INTERFACE BOARD","series_page_description":"GE PROCESS INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 09:18:26","prod_pdf":[]},{"id":14107,"part_number":"531X133PRUAFG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROCESS INTERFACE BOARD GE","short_desc":"The 531X133PRUAFG1 is a GE PROCESS INTERFACE BOARD","content":"

The 531X133PRUAFG1 is a printed circuit board component created by GE for use within many of their general purpose drive systems. Please be sure this board is compatible with your drive system before purchase.

The 531X133PRUAFG1 functions as a Process Interface board. It is marked with the GE logo, with its board ID number, and with several other codes/markings. This includes F31X33PRUAFG1, FR00/0, 002/0, and 004/0. Components on the board surface are marked with reference designators for simple reference.

The 531X133PRUAFG1 is populated by capacitors made of materials like ceramic, electrolytic material, and polyester vinyl. Resistors tend toward metal film. The board is also populated by six resistor network arrays and seven potentiometers. Potentiometers are individually labeled with the range they are responsible for controlling, for example, “PF GAIN.”

Connectors on the surface of the 531X133PRUAFG1 include a header connector, two vertical pin connectors (male,) and a three-screw connection terminal strip. The board is drilled in each corner for mounting. It has fourteen jumper switches and several TP test points. There are nine integrated circuits on the board surface. There is also a single switch component that has seven individual switch toggles on its surface. Each toggle is numbered. The switch is labeled “SW1” and is also labeled “Tach Range.” Each toggle can be individually set to an “on” or “off” position.

If more information on the 531X133PRUAFG1 board or its components is needed, please refer to publications like manuals, user guides, or data sheets from General Electric that reference this part number.

","meta_title":"PROCESS INTERFACE BOARD GE","meta_description":"PROCESS INTERFACE BOARD GE","keywords":"PROCESS INTERFACE BOARD GE","series_page_description":"PROCESS INTERFACE BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 10:11:14","prod_pdf":[]},{"id":14108,"part_number":"531X133PRUAGG1 ","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROCESS INTERFACE PCB","short_desc":"The 531X133PRUAGG1 is a GE PROCESS INTERFACE PCB","content":"

The 531X133PRUAGG1 is a PCB component manufactured by the GE company. This board, along with the rest of the 531x series, is designed to be a general purpose board able to be used within a number of drive systems manufactured by General Electric. Please refer to your drive system’s user guide for replacement ordering information.

The 531X133PRUAGG1 is a Process Interface Card. The PCB is marked with the board ID number, the manufacturer’s logo, and with markings like FR00/0, 004/0, 005/0, VA-4, and F31X133PRUAGG1. Most components located on the board surface are marked with some kind of reference designator to simplify identification.

The 531X133PRUAGG1 is a component-dense board with many capacitors, resistors, and diodes. Resistors tend to be made of metal film, while capacitors may be made from polyester vinyl, electrolytic, or ceramic material. The board also has seven potentiometer components and seven resistor network arrays. The potentiometer components are all individually labeled with the ranges they control, such as P7 that is also labeled “SFB Zero.”

The 531X133PRUAGG1 is factory drilled at each corner to allow for mounting. The board has three pin connectors that include a sixteen pin header connector and two vertical male cable connectors. The board is also home to a three-position terminal strip. Other components include nine integrated circuits, jumper switches, TP test points, and a seven position switch component. The switch is labeled “Tach Range.” Each of its individual toggles can be set to on or off individually. More information on this board or its components may be found through manufacturer user guides or manuals.

","meta_title":"GE PROCESS INTERFACE PCB","meta_description":"GE PROCESS INTERFACE PCB","keywords":"GE PROCESS INTERFACE PCB","series_page_description":"GE PROCESS INTERFACE PCB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 11:02:19","prod_pdf":[]},{"id":14109,"part_number":"531X133PRUAJG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROCESS INTERFACE CARD","short_desc":"The 531X133PRUAJG1 is a PROCESS INTERFACE CARD","content":"

The 531X133PRUAJG1 is a printed circuit board manufactured by the General Electric company. The board, as well as the rest of the 531x series of boards, is designed for use within a number of general purpose drive systems made by General Electric. Your drive system’s user guide or manual may have information regarding ordering compatible drives.

The 531X133PRUAJG1 functions as a Process Interface Board. This is one of many versions of process interface boards available within the 531x series. The board is marked with the GE logo, the board’s use, and id number, as well as other codes like FR00/0, 002/0, 004/0, 005/0, 003/0, and F31X133PRUAJG1. The board is factory drilled in all four corners to allow for mounting.

The 531X133PRUAJG1 is covered in components and written designators markings to allow for easy identification of board parts. The board has several lines of metal film resistors. These are interspersed with diodes and ceramic capacitors. The 531X133PRUAJG1 also makes use of electrolytic capacitors and capacitors of other material. Other similar components on the board include seven potentiometers and six resistor network arrays.

The 531X133PRUAJG1 has two vertical pin (male) cable connectors. It has a single 16-pin header connector. The board has a 3-screw terminal strip that is located in one corner of the board; this component is marked on one side TACH (-) and on the other TACH (+). There is a single switch component that is marked “Tach range.” This switch is fitted with seven individual toggles that can be set to “on” or “off.” Other components on the board include jumper switches, TP test points, and integrated circuits.

","meta_title":"PROCESS INTERFACE CARD","meta_description":"PROCESS INTERFACE CARD","keywords":"PROCESS INTERFACE CARD","series_page_description":"PROCESS INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-19 13:27:44","prod_pdf":[]},{"id":14110,"part_number":"531X133PRUAKG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Process Interface Board","short_desc":"The 531X133PRUAKG1 is a Process Interface Board","content":"

The 531X133PRUAKG1 is a PCB component created by GE. This board is part of the 531x series, which may be used in a wide variety of general purpose drive systems manufactured by the General Electric Company. Please review your system’s manual or user guide to determine compatibility.

The 531X133PRUAKG1 is designed to function as a Process Interface Card. There are several versions of the process interface board within this series. The 531X133PRUAKG1 Is marked by the manufacturer logo, the board function, the id number, and also carries other markings like FR00/0, F31X133PRUAKG1, 002/0, 010/0, and 94V-0. The majority of components located on the board have been marked with reference designators to allow users to easily identify each one.

The 531X133PRUAKG1 board is populated by several lines of metal film resistors. These are interspersed by capacitors made of materials like ceramic, polyester vinyl, and aluminum electrolytic. The board has four resistor network arrays and seven potentiometers. Each of these potentiometers is individually labeled by what each component is responsible for. Other components on the board surface include TP test points, jumper switches, vertical pin cable connectors (2,) header connectors, diodes, a terminal strip, and integrated circuits. The terminal strip has three screw connections. Integrated circuits include high-performance analog inverters, high-performance analog line receivers, and operational amplifiers. More information on the board and its function may be found through user guides or data sheets published by General Electric. The manufacturer (GE) originally provided all technical support for the 531x circuit boards.

","meta_title":"Process Interface Board","meta_description":"Process Interface Board","keywords":"Process Interface Board","series_page_description":"Process Interface Board","quote_description":null,"inventory_notes":"NO BOX","cross_reference":"","created_at":null,"updated_at":"2019-02-20 08:38:13","prod_pdf":[]},{"id":14111,"part_number":"531X133PRUALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Interface Board","short_desc":"The 531X133PRUALG1 is a Process Interface Board","content":"

The 531X133PRUALG1 is a board component manufactured by General Electric. The board can be used within general purpose drive systems made by GE. Your system’s user guide or manual will help you determine compatibility between this PCB and your particular system.

The 531X133PRUALG1 is a Process Interface Board. Interface boards are typically used to filter, amplify, isolate, and convert input signals into outputs suitable for use for the connected control systems. The 531X133PRUALG1 is one of several versions of the Process Interface board available within the 531x series.

The 531X133PRUALG1 is drilled in each corner to allow for mounting options. The board is marked with codes like F31X133PRUALG1, 006/01, and 002/01. Most components carry individual part numbers from their manufacturers and are also marked by reference designators for easy identification.

The 531X133PRUALG1 has a single three-position terminal strip. This is located in one corner of the board. It has two cable connectors. Both connectors are male vertical pin components. There is also a single header connector located on the board surface. The board has seven potentiometers, five resistor network arrays, dozens of metal film resistors, diodes, and ceramic capacitors, polyester vinyl capacitors, as well as a single aluminum electrolytic capacitor. There are multiple TP test points and jumper switches placed on the board. Integrated circuits include analog line receivers and analog inverters. There is also a single switch component with seven individual toggles. This component is labeled “Tach range.” More information about the board, its function, and information on installation and maintenance may be accessed through GE manuals and user guides.

","meta_title":"GE Interface Board","meta_description":"GE Interface Board","keywords":"GE Interface Board","series_page_description":"GE Interface Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-20 09:23:27","prod_pdf":[]},{"id":14113,"part_number":"531X133PRUAMG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Process Interface Card","short_desc":"The 531X133PRUAMG1 is a Process Interface Board","content":"

The 531X133PRUAMG1 is a PCB board component made by GE. This PCB is designed for use within several general purpose drive systems from GE. Please refer to your particular system’s user guide or manual to ascertain compatibility.

The 531X133PRUAMG1 functions as a Process Interface Board. Interface components typically are used to amplify, isolate, filter, and convert their input signals into output signals that are suitable for their connected control systems. The PRUAM board is only one version of several available within this series.

The 531X133PRUAMG1 is a square board with a single factory-made drill hole placed in each corner. The board carries the round GE logo, the board number, and codes like 92/38, 009/01, 002/01, 006/01, and F31X133PRUALG1. Codes may be located on the front or rear surfaces of the PCB.

The 531X133PRUAMG1 has components that allow connection such as a three-position terminal strip. This is marked TACH + on one side and TACH - on the other. The board has two vertical pin cable connectors and a single 16-pin (vertical) header connector.

The 531X133PRUAMG1 is populated by potentiometers (7,) resistor network arrays(5,) resistors (over 100,) diodes, and capacitors. Capacitors vary in the material used, but include aluminum electrolytic, polyester vinyl and capacitors made from ceramic material. The board has 15 jumper switches and several TP test points. It has a single switch component (marked “Tach Range,”) with seven individual toggles located on the switch. If more information about the board or its components is needed, this may be found through GE publications like user guides and manuals.

","meta_title":"Process Interface Card","meta_description":"Process Interface Card","keywords":"Process Interface Card","series_page_description":"Process Interface Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-20 10:20:11","prod_pdf":[{"id":1873,"product_id":14113,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14114,"part_number":"531X133PRUANG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROCESS INTERFACE GE BOARD","short_desc":"The 531X133PRUANG1 is a Process Interface Board","content":"

The 531X133PRUANG1 is a Process Interface Board manufactured by GE for use within several of their general purpose drive systems. Please refer the manual or user guide associated with your drive system to determine compatibility.

The 531X133PRUANG1 is used to amplify, filter, and convert input signals so they can be properly used by the connected control system. This is one of several versions of this board available within the series. It is marked with the board number and codes like F31x133PRUALG1, 002/01, 003/01, and 006/01. Codes are located on both the front and back surface of the board.

The 531X133PRUANG1 is populated by components like a 16-pin header connector, two cable connectors with vertical pins, and a terminal strip. The terminal strip has three screw connections and is marked TACH (-) and TACH (+.) The board also has fifteen jumper switches and several TP test points. It has one switch component that is labeled “TACH range.” This component has seven individual toggle switches that can be set to open or closed.

The 531X133PRUANG1 is populated by various resistors, capacitors, and diodes. Most capacitors on the board are made from ceramic material, but several are made from polyester vinyl, and one is an aluminum electrolytic component. The board has one hundred metal film resistors, most that are mounted vertically to the board surface. However, three of these resistors are mounted horizontally or are connected to surface wiring to other board components. The board also makes use of seven potentiometers and five resistor network arrays. More information about the 531X133PRUANG1 may be found through GE user guides and manuals.

","meta_title":"PROCESS INTERFACE GE BOARD","meta_description":"PROCESS INTERFACE GE BOARD","keywords":"PROCESS INTERFACE GE BOARD","series_page_description":"PROCESS INTERFACE GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-20 10:52:06","prod_pdf":[]},{"id":14115,"part_number":"531X133PRUAPG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Drive Process Interface Card","short_desc":"The 531X133PRUAPG1 is a GE Process Interface Board","content":"

The 531X133PRUAPG1 is a Process Interface Board component manufactured by GE. This board is designed for use in general purpose drives manufactured by General Electric. It is factory drilled in each corner to allow for mounting and is marked on its front or back surface with codes like C-ESS, 006/03, 002/03, and F31X133PRUAPG1.

The 531X133PRUAPG1 is built with 100 resistors. These are primarily metal film resistors. The board also has seven potentiometers and five resistor network arrays. Potentiometers are labeled with their reference designator and also with their use (examples include TACH SCL, STP SCL, SFB ZERO, and PF OFF.) The board uses capacitors of various materials. Most capacitors are made of ceramic, but there are several polyester vinyl capacitors on the board surface, and one made from an aluminum electrolytic medium.

The 531X133PRUAPG1 is populated by nine integrated circuits. These function as high-performance analog operational amplifiers, high-performance analog line drivers, high-performance analog line receivers, and XOR gates. Integrated circuits are typically marked with their manufacturer part number to allow for simple replacement of a failing part.

Other components located on the surface of the 531X133PRUAPG1 include a 16-pin header connector, two vertical pin cable connectors, and a 3-screw terminal strip. This component is marked (TACH +) and (TACH -) on the board to the left and right of its attachment points. There is also a switch component on the board surface. This component has seven individual toggles that can be set in an on or off position. Please refer to manuals or datasheets for more information.

","meta_title":"Drive Process Interface Card","meta_description":"Drive Process Interface Card","keywords":"Drive Process Interface Card","series_page_description":"Drive Process Interface Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-20 11:28:34","prod_pdf":[{"id":1872,"product_id":14115,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14116,"part_number":"531X133PRUAZG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROC INTERF BOARD","short_desc":"The 531X133PRUAZG1 is a Process Interface Board","content":"

531X133PRUAZG1--Process Interface Board

The 531X133PRUAZG1 is a PCB component fabricated by GE to be a part of one of various general purpose drive systems similar to and including the DC-300 drive. While these systems are typically considered obsolete, they were originally designed by General Electric to be adaptable and dynamic systems capable of use in a number of industrial applications. This board is drilled in each corner and has been etched with codes like 002/0, 94V-0, FR00/0, and its secondary board number, F31X133PRUAKG1.

The 531X133PRUAZG1 is a Process Interface Board that has two vertical pin male cable connectors along with a header connector and a terminal strip with three screw positions. The board has individual terminal pins that are labeled things like “+5V” and “DCOM.” These components allow the board to connect to and communicate with other boards or off-board components.

The 531X133PRUAZG1 has over fifteen jumper switches and over ten integrated circuits, including inverters and XOR gates. Other components include seven potentiometers, five resistor network arrays, and a switch component with seven toggles. The switch is labeled “Tach Range.”

The 531X133PRUAZG1 has resistors, diodes, and capacitors. These vary in materials but include metal film resistors, ceramic capacitors, electrolytic capacitors, and two capacitors made of polyester vinyl. More information on this board, like installation procedures and maintenance schedules, may be accessed through GE publications like data sheets, manuals, and user guides.

AX Control knows time is important when you are experiencing a stoppage. Most of our in-stock parts ship the day you place your order. We have several expedited shipping options available. In emergencies, we are happy to work with your courier service for extra quick turnaround.

","meta_title":"GE PROC INTERF BOARD","meta_description":"GE PROC INTERF BOARD","keywords":"GE PROC INTERF BOARD","series_page_description":"GE PROC INTERF BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-05 15:19:31","prod_pdf":[]},{"id":14117,"part_number":"531X134EPRBEG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Encoder Process Board","short_desc":null,"content":"

The 531X134EPRBEG1 is a product from General Electric. The 531X134EPRBEG1 is an Encoder Process Board, used in industrial applications. The 531X134EPRBEG1 has a small blue box this seven white buttons. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven. The 531X134EPRBEG1 has four metal male terminals. These male terminals are used to connect the 531X134EPRBEG1 to surrounding circuit boards. The 531X134EPRBEG1 has a light green tower with three flat head screws on the top. The 531X134EPRBEG1 has twenty-two diodes. The 531X134EPRBEG1 has sixteen microchips, also referred to as chips, Integrated Circuits, or IC. The Integrated Circuits are components used to store all the data for the 531X134EPRBEG1 to work properly. They are also split into smaller groups based on whether they can be programmed or not. The 531X134EPRBEG1 has one-hundred and eighteen condensers which are used to store energy. The 531X134EPRBEG1 has over one hundred resistors. Resistors have the opposite purpose of condensers. Resistors are meant to disperse energy. The circuit board can become unusable if hooked up to the wrong power source please consult with an engineer for correct placement of the circuit board.

The 531X134EPRBEG1 is for industrial applications but is widely considered obsolete and therefore are difficult to come by. AX Control deals in the difficult to find parts to assist you in getting the right part for the right job.

AX Control would like to be your first choice for your automation needs. Please email or call today.

","meta_title":"GE Encoder Process Board","meta_description":"GE Encoder Process Board","keywords":"GE Encoder Process Board","series_page_description":"GE Encoder Process Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 15:43:38","prod_pdf":[{"id":1871,"product_id":14117,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14118,"part_number":"531X134EPRBFG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROCESS INTERFACE BOARD GENERAL ELECTRIC","short_desc":null,"content":"

The 531X134EPRBFG1 is a product created for industrial application by General Electric. The 531X134EPRBFG1 is referred to as an Encoder Process Board and has since been labeled as an out of date circuit board. The 531X134EPRBFG1 has one-hundred and eighteen capacitors. The Capacitors (Condensers) are used to store an electric charge in a self-created electrical field which doesn’t allow energy to escape. The 531X134EPRBFG1 has a small blue box this seven white buttons. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven. The 531X134EPRBFG1 has four metal male terminals. These male terminals are used to connect the 531X134EPRBFG1 to surrounding circuit boards and energy sources. The 531X134EPRBFG1 has a light green tower with three flat head screws on the top. The 531X134EPRBFG1 has twenty-two diodes. The 531X134EPRBFG1 has sixteen Integrated Circuits. The Integrated Circuits are components used to store all the data for the 531X134EPRBFG1 to work properly. Depending on the manual you have they can be referred to as Microchips, chips, or IC. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven. The 531X134EPRBFG1 has over one hundred resistors. AX Control is here for all your automation needs. Here at AX Control, we specialize in out of date circuit boards and parts, making us an easy one-stop shop. We offer warranties with each product as well.

Email or call the staff at AX Control for further details on our warranties or for a quote.

","meta_title":"PROCESS INTERFACE BOARD GENERAL ELECTRIC","meta_description":"PROCESS INTERFACE BOARD GENERAL ELECTRIC","keywords":"PROCESS INTERFACE BOARD GENERAL ELECTRIC","series_page_description":"PROCESS INTERFACE BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 15:11:15","prod_pdf":[]},{"id":14119,"part_number":"531X134EPRBGG1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL PCB","short_desc":"","content":null,"meta_title":"GE CONTROL PCB","meta_description":"GE CONTROL PCB","keywords":"GE CONTROL PCB","series_page_description":"GE CONTROL PCB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14120,"part_number":"531X134EPRBHG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":10,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"ENCODER INTERFACE GE BOARD","short_desc":null,"content":"

The 531X134EPRBHG1 is produced by General Electric. The 531X134EPRBHG1 is known as an Encoder Interface card. The 531X134EPRBHG1 is used for a multitude of industrial applications. The 531X134EPRBHG1 fifteen Integrated Circuits. The Integrated Circuits also referred to as microchips, a chip, or IC’s contain all the programs for 531X134EPRBHG1. The microchips are used to hold data and various programs for the 531X134EPRBHG1. There is a subgroup of microchips known as EPROM’s that allow for their programming to be altered. The 531X134EPRBHG1 has one-hundred and eighteen capacitors. These capacitors (condensers) ideally store energy in an electrical field. While doing this no energy is lost to the 531X134EPRBHG1 it can tapped into as needed. The 531X134EPRBHG1 has a small blue box this seven white buttons. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven. The 531X134EPRBHG1 has four metal male terminals. These male terminals are used to connect the 531X134EPRBHG1 to surrounding circuit boards and allow for communication between circuit boards. The 531X134EPRBHG1 has a light green tower with three flat head screws on the top. The 531X134EPRBHG1 has twenty-two diodes. The 531X134EPRBFG1 has over one hundred resistors. Each resistor has an equation that can be solved by a trained engineer to calculate the amount of energy each resistor can withstand known as a manufacturing tolerance, to prevent improper use of the circuit board.

AX Control’s skilled staff is happy to answer any questions you may have about the 531X134EPRBHG1 or to prove a price quote.

","meta_title":"ENCODER INTERFACE GE BOARD","meta_description":"ENCODER INTERFACE GE BOARD","keywords":"ENCODER INTERFACE GE BOARD","series_page_description":"ENCODER INTERFACE GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 15:07:31","prod_pdf":[]},{"id":14121,"part_number":"531X134EPRBJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROCESS INTERFACE CARD","short_desc":null,"content":"

The 531X134EPRBJG1 is a process interface card by General Electric. The 531X134EPRBJG1 is a large circuit board with many large and small components. The 531X134EPRBJG1 features one-hundred and six various capacitors. The 531X134EPRBJG1 has a small blue box this seven white buttons. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven. The 531X134EPRBJG1 has a light green tower with three flat head screws on the top. These towers are used to connect various wires to the circuit board and are held in place with the screws. The 531X134EPRBJG1 has seven small blue Variable Resistors or Potentiometers. Variable Resistors are used to control energy flow. Variable Resistors can be found in other products such as the radio volume dial or adjustable lights. The 531X134EPRBJG1 also has over one-hundred and fifty resistors (some have banding and others have writing on the side). These markings can be read by an experienced engineer. The marking indicates the amount of energy that the resistors can scatter. In scattering the energy, the resistor does give off heat*. The 531X134EPRBJG1 has three male terminal ports that are used along with ribbon wiring harnesses to connect with surrounding circuit boards. The 531X134EPRBJG1 also uses EPROM and EEPROM to store data for this circuit board to function. These are referred to as microchips and store data that allows the circuit board to function.

Contact AX Control via phone or email for further material.

","meta_title":"GE PROCESS INTERFACE CARD","meta_description":"GE PROCESS INTERFACE CARD","keywords":"GE PROCESS INTERFACE CARD","series_page_description":"GE PROCESS INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 11:33:48","prod_pdf":[]},{"id":14122,"part_number":"531X134EPRBMG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Process Interface Module","short_desc":null,"content":"

The 531X134EPRBMG1 is a process interface card by General Electric. The 531X134EPRBMG1 is a large circuit board with many large and small components. The 531X134EPRBMG1 has three male terminal ports that are used along with ribbon wiring harnesses to connect with surrounding circuit boards. The 531X134EPRBMG1 has a small blue box this seven white buttons. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven. The 531X134EPRBMG1 has a light green tower with three flat head screws on the top. The 531X134EPRBMG1 has seven small blue Variable Resistors or Potentiometers. The 531X134EPRBMG1 also has over one-hundred and fifty resistors (some have banding and others have writing on the side). The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The colored bands correspond with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The 531X134EPRBMG1 features one-hundred and six various capacitors. These capacitors are used to store energy. The capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X134EPRBMG1 also uses EPROM and EEPROM to store data for this circuit board to function.

Please call AX Control for further material.

","meta_title":"Process Interface Module","meta_description":"Process Interface Module","keywords":"Process Interface Module","series_page_description":"Process Interface Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:01:28","prod_pdf":[{"id":1870,"product_id":14122,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14123,"part_number":"531X134EPRBNG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE ENCODER PROCESSOR INTERFACE CARD","short_desc":null,"content":"

The 531X134EPRBNG1 is produced by General Electric. The 531X134EPRBNG1 is an Encoder Processor Interface card, used for industrial applications. The 531X134EPRBNG1 has sixteen Integrated Circuits. The Integrated Circuits also referred to as IC (for short), a microchip, or chip, houses all programming data to control the 531X134EPRBNG1. Only the IC’s subgroup referred to as EPROM can be upgraded with new programs as needed. The 531X134EPRBNG1 has four male terminals that can use ribbon wiring harnesses to connect to surrounding circuit boards. The 531X134EPRBNG1 has over forty various sized capacitors also referred to as condensers in other areas of the world. The condensers use an electrical field to store energy. Ideally, a condenser doesn’t dissipate any energy, meaning no energy is lost. The 531X134EPRBNG1 has one-hundred and thirty various resistors. The 531X134EPRBNG1 has seven small blue Variable Resistors that have a small white circle with a small slit in the center used to adjust the resistors. These resistors can be deciphered by a trained engineer for there energy capacity and where this circuit board would best fit into your current system. The 531X134EPRBNG1 has a small white box with seven buttons. The box is labeled “OFF” on one side and has the buttons labeled one through seven over the top. The 531X134EPRBNG1 is an outdated part. AX Control can help you easily get those hard to find items, to get your business up and running again.

Call AX Control for further information about the 531X134EPRBNG1 or if you would like a quote.

","meta_title":"GE ENCODER PROCESSOR INTERFACE CARD","meta_description":"GE ENCODER PROCESSOR INTERFACE CARD","keywords":"GE ENCODER PROCESSOR INTERFACE CARD","series_page_description":"GE ENCODER PROCESSOR INTERFACE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 14:53:13","prod_pdf":[{"id":1869,"product_id":14123,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14124,"part_number":"531X135PRGAAM3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROGRAMMER BOARD","short_desc":null,"content":"

The 531X135PRGAAM3 is a Programmer Board. The 531X135PRGAAM3 has six Integrated Circuits that hold all the programs for the circuit board to function. The Integrated Circuits are split into two groups called EPROM and EEPROM. Both groups hold the programming data the only difference is the EPROM can be programmed with new data when it becomes available while the EEPROM cannot. The 531X135PRGAAM3 has thirteen capacitors. The Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X135PRGAAM3 has four sets of Jumper Ports. These Jumper Ports come with plastic covers that allow the worker to move them around the circuit board to control the flow of energy. The 531X135PRGAAM3 has eighteen various colored resistors with banding marks. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The colored bands correspond with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The 531X135PRGAAM3 has a large LED panel that will illuminate with numbers. The 531X135PRGAAM3 has a crystal oscillator that uses crystals to make a highly precise frequency. The 531X135PRGAAM3 has a single small black transistor. The transistor is a semiconductor device used to amplify or switch electronic signals and electrical power. It is composed of semiconductor material usually with at least three terminals for connection to an external circuit.

","meta_title":"GE PROGRAMMER BOARD","meta_description":"GE PROGRAMMER BOARD","keywords":"GE PROGRAMMER BOARD","series_page_description":"GE PROGRAMMER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"531X135PRGBFG1?","created_at":null,"updated_at":"2018-11-26 16:02:34","prod_pdf":[]},{"id":14125,"part_number":"531X135PRGAJM1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROGRAM BOARD GE DC300","short_desc":"The 531X135PRGAJM1 is a PROGRAM BOARD from GE","content":"

531X135PRGAJM1--Program board

The 531X135PRGAJM1 is a board component made by General Electric to fit into one of several of their general purpose drive systems like the DC-300 drive and other like drives. While many of these drives are now considered obsolete, they were designed by GE as dynamic and adaptable systems capable of completing a wide variety of industrial tasks.

The 531X135PRGAJM1 functions as a Program Board. It has codes such as 0787, and is factory drilled multiple times around its edges. This PCB is typically covered by a faceplate designed with a keypad with sixteen press buttons, including numerical keys from zero to nine. The faceplate connects to the PCB using four screw connections. This board often mounts to a larger motherboard.

The 531X135PRGAJM1 has four jumper switches, several transistors, three resistor network arrays, and six integrated circuits. ICs are usually marked with manufacturer codes for quick identification of their type and use.

Other components used on the 531X135PRGAJM1 include a ten-digit alphanumeric display. This component is placed on the board parallel to one of the short edges of the board. When the corresponding faceplate is attached to the board, this display is still exposed. The board also has various resistors, capacitors, and diodes. There is a single female vertical pin connector located just below the alphanumeric display and a right-angled cable connector located on the bottom edge of the board. A more complete description of the board that includes such things as installation instructions and handling procedures may be found through manufacturer publications like user guides, data sheets, and manuals.

","meta_title":"PROGRAM BOARD GE DC302","meta_description":"PROGRAM BOARD GE DC303","keywords":"PROGRAM BOARD GE DC304","series_page_description":"PROGRAM BOARD GE DC300","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-06 08:16:50","prod_pdf":[]},{"id":14126,"part_number":"531X135PRGALM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Industrial PC Board","short_desc":null,"content":"

The 531X135PRGALM1 is a product of General Electric. It is known as a Programmer Board. The 531X135PRGALM1 has a crystal oscillator that uses crystals to make a highly precise frequency. The 531X135PRGALM1 has thirteen capacitors (condensers). Condensers store energy in an electrical field. The manner in which the energy is stored allows very little to no energy to dissipate. The 531X135PRGALM1 has four sets of Jumper Ports. These Jumper Ports come with plastic covers that are used to close or open various circuits around the circuit board. The 531X135PRGALM1 has a single small black transistor. The 531X135PRGALM1 has eighteen various colored resistors with banding marks. The various resistors are used to disperse unnecessary energy. The markings on each resistor show the engineer the amount of energy they can disperse. This allows the engineer to properly place the circuit board. The 531X135PRGALM1 has a large LED panel that will illuminate with numbers. The 531X135PRGALM1 has six Integrated Circuits that hold all the programs for the circuit board to function. The Integrated Circuits have two subgroups. The subgroup that can be updated is known as EPROM while the other is known as EEPROM. The 531X135PRGALM1 is a difficult part to find and is widely considered an out of date component. Here at AX Control we excel in the hard to find and are here to help you get up and running again. Please allow AX Control to be your go-to for all your Automation needs.

Call or email the knowledgeable staff at AX Control.

","meta_title":"Industrial PC Board","meta_description":"Industrial PC Board","keywords":"Industrial PC Board","series_page_description":"Industrial PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 15:22:56","prod_pdf":[{"id":1868,"product_id":14126,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14127,"part_number":"531X135PRGALM2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROGRAM BOARD","short_desc":null,"content":"

The 531X135PRGALM2 is a circuit board produced by General Electric. The 531X135PRGALM2 is known as a Programmer Board and is used in various industrial applications. The 531X135PRGALM2 is available through AX Control but is widely considered an obsolete circuit board. The 531X135PRGALM2 has a crystal oscillator that uses crystals to make a highly precise frequency. The 531X135PRGALM2 has four sets of Jumper Ports. These Jumper Ports come with plastic covers that are used to close or open individual circuits around the board. The 531X135PRGALM2 has a single small black transistor. Easily picked out by its three attachment points a transistor amplifies signals or power. The 531X135PRGALM2 has six Integrated Circuits that hold all the programs for the circuit board to function. The Integrated Circuits are referred to by many names such as a microchip, a chip, or IC for short. They hold data for the 531X135PRGALM2 and only ones referred to as EPROMs can be altered. The 531X135PRGALM2 has eighteen various colored resistors with banding marks. These markings are used by the engineer to calculate the energy levels each resistor is used for, in order to decide the best use and placement of the circuit board. The 531X135PRGALM2 has thirteen capacitors. The Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X135PRGALM2 has a large LED panel that will illuminate with numbers.

Please contact the staff at AX Control for further information or a price quote for on the 531X135PRGALM2.

","meta_title":"GE PROGRAM BOARD","meta_description":"GE PROGRAM BOARD","keywords":"GE PROGRAM BOARD","series_page_description":"GE PROGRAM BOARD","quote_description":null,"inventory_notes":"USED IN BOX","cross_reference":"","created_at":null,"updated_at":"2018-11-27 14:40:46","prod_pdf":[]},{"id":14128,"part_number":"531X135PRGAMM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PROGRAMMER CARD","short_desc":null,"content":"

The 531X135PRGAMM1 is an Electronic Programmer Card. The 531X135PRGAMM1 is also referred to as a human-machine interface or HMI. The 531X135PRGAMM1 has a keypad with sixteen buttons on it. The buttons are labeled zero through nine along with a few others. Each button has multiple functions. The button labeled one is labeled “RUN” and “DGS”, button number two is labeled “SLOW” and “DGR”, button three is labeled “JOG” and “DVM”, button number four is labeled “R1” and “ARM V”, button five is labeled “R2” and “ARM 1”, button six is labeled “REV” and “FIELD 1”, button seven is labeled “A/M” and “SPEED”, button number eight is labeled “RATIO” and “TORQ”, button number nine is labeled “PRGSV” and “HP”, button number zero is labeled “DRV #”. The other buttons are labeled as follows. “REFR / ENTER/ RAM”, “SET /NEXT/ TEST”, “RESET / CLEAR / MODE”, “INC (with an arrow pointing up)”, “DEC (arrow pointing down)”, and one is red and labeled “STOP”. All the labels in the first set are labeled red and the labels in the second set are labeled in blue. The 531X135PRGAMM1 has an LED screen at the top of the device. Directly under the LED screen is a slit that is as long as the LED screen. The 531X135PRGAMM1 secures into place with four metal screws and has two sets of indentations along the edges (two half circles and the others are two right angles).

Please call AX Control’s skilled staff for a quote or any further information.

","meta_title":"GENERAL ELECTRIC PROGRAMMER CARD","meta_description":"GENERAL ELECTRIC PROGRAMMER CARD","keywords":"GENERAL ELECTRIC PROGRAMMER CARD","series_page_description":"GENERAL ELECTRIC PROGRAMMER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:04:21","prod_pdf":[]},{"id":14129,"part_number":"531X135PRGATM2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":7,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL BOARD","short_desc":null,"content":"

The 531X135PRGATM2 is a Programmer Board. As the name implies, the board is used as part of a link in programming components in GE industrial systems. 531X135PRGATM2 is part of the GE 531X series of boards. The 531X135PRGATM2 has thirteen capacitors which store an electric charge. The 531X135PRGATM2 has a large LED panel that will illuminate with numbers. The 531X135PRGATM2 has four sets of Jumper Ports. These Jumper Ports come with plastic covers that allow the worker to move them around the circuit board to control the flow of energy. The 531X135PRGATM2 has a crystal oscillator that uses crystals to make a highly precise frequency. The crystal oscillator creates an electrical signal and is best known in it’s usage in watches, as keeping time is generally the most frequent use of a crystal oscillator.

The 531X135PRGATM2 has a single small black transistor, this transistor is made of semiconductor material and normally features a three pronged design. Transistors are crucial to modern electronics and are featured in everything from circuit boards to radios. The 531X135PRGATM2 has six Integrated Circuits that hold all the programs for the circuit board to function. The integrated circuits are the brains of the circuit board so to speak. These circuits are also commonly known as chips and contain the data necessary for the board to perform its function. These chips come in two varieties differing by their programmability.

This board has eighteen various colored resistors with banding marks which are used to determine energy restriction which is the main purpose of resistors. The bands on 531X135PRGATM2 are colored and striped which will allow an someone versed in electrical circuitry to determine the use of each capacitor.

","meta_title":"GE CONTROL BOARD","meta_description":"GE CONTROL BOARD","keywords":"GE CONTROL BOARD","series_page_description":"GE CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 14:49:09","prod_pdf":[]},{"id":14130,"part_number":"531X135PRGAWM2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":7,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PROGRAMMER CARD","short_desc":null,"content":"

The 531X135PRGAWM2 is a Programmer Board that is used in the General Electric 531X Series. The 531X series is generally suited for industrial applications. The 531X135PRGAWM2 has a crystal oscillator that uses crystals to make a highly precise frequency. The 531X135PRGAWM2 has a single small black three pronged transistor which has a variety of uses in circuit board technology.

The 531X135PRGAWM2 has eighteen various colored resistors with banding marks. The resistors on this board are widely varied in terms of color coding and application, but the common purpose of a resistor is to simply provide electrical resistance.

Microchips, also known as integrated circuits, feature prominently on this board. The 531X135PRGAWM2 has six Integrated Circuits that hold all the programs for the circuit board to function. The programmability of each board in the 531 series depends on whether an EPROM or EEPROM chip has been used.

The 531X135PRGAWM2 has thirteen capacitors which act to store energy. On a circuit board such as this the capacitors are passive components that are designed to add what is know as capacitance to a circuit.

The colored bands correspond with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The 531X135PRGAWM2 has a large LED panel that will illuminate with numbers. The 531X135PRGAWM2 has four sets of Jumper Ports. These Jumper Ports come with plastic covers that allow the worker to move them around the circuit board to control the flow of energy.

","meta_title":"GE PROGRAMMER CARD","meta_description":"GE PROGRAMMER CARD","keywords":"GE PROGRAMMER CARD","series_page_description":"GE PROGRAMMER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 14:28:11","prod_pdf":[]},{"id":14131,"part_number":"531X135PRGAYM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PROGRAM BOARD GE","short_desc":"","content":null,"meta_title":"PROGRAM BOARD GE","meta_description":"PROGRAM BOARD GE","keywords":"PROGRAM BOARD GE","series_page_description":"PROGRAM BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14132,"part_number":"531X135PRGBBG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC BOARD GENERAL ELECTRIC","short_desc":"","content":null,"meta_title":"PC BOARD GENERAL ELECTRIC","meta_description":"PC BOARD GENERAL ELECTRIC","keywords":"PC BOARD GENERAL ELECTRIC","series_page_description":"PC BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14133,"part_number":"531X136TBGAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE TB OPTION CARD","short_desc":null,"content":"

The 531X136TBGAAG1 is a TB option card. The 531X136TBGAAG1 is a long slender circuit board. The 531X136TBGAAG1 features two green plastic sections one running the length of the circuit board and one only a small section. The small plastic section has fifteen small flat head screws along it. The large plastic section has fifty-four flat head screws. The 531X136TBGAAG1 has four male metal terminals used to connect the circuit board to other circuit boards. The short plastic terminals are labeled individually. From top to bottom the go as follows. “POL”, “REF24”, “JOG”, “RUN”, “MUP3”, “MUP2”, “MUP1”, “CLA”, “JOGR”, “-15V”, “MSR”, “+15V”, “MSR”, “ACOM”, “+5V”, “RSET”. The large plastic section is marked one through fifty-four with the following labels. “XSTP”, “PCOM”, “CTLN1”, “CTLN2”, “IMET”, “REF24”, “INTR”, “VMET”, “FCMET”, “PCN”, “PCP”, “MRI”, “PFRF”, “DTB”, “DTB (with a line over it)” “DTA”, “DTA(WITH A LINE OVER IT
)”, “PREF”, “PRFC”, “SMET”, “ACOM”, “DCOM”, “R232”, “T232”, “DM5”, “---“, “RXA”, “---“, “DTRA”, “---“, “---“, “CTSA”, “---“, “TXA”, “---“, “RXB”, “DCOM”, “DTRB” “+5v”, “RST”, “CTSB”, “+5v”, “TXB”, “DCOM”, “-24V”, “SPRNO”, “SPRCM”, “SPRNC”, “START”, “PBCM”, “STOP”, “MAXCM”, “MAXNO”, AND “MAXNC”. The circuit board has the part number (531X136TBGAAG1) printed on the circuit board along with General Electric’s company symbol with VA-4 underneath it.

Please call AX Control if you would like more information or a price quote.

","meta_title":"GE TB OPTION CARD","meta_description":"GE TB OPTION CARD","keywords":"GE TB OPTION CARD","series_page_description":"GE TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:08:46","prod_pdf":[]},{"id":14134,"part_number":"531X137TRGAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL BOARD","short_desc":null,"content":"

The 531X137TRGAAG1 is a product of General Electric. The 531X137TRGAAG1 is called a TB option card. The 531X137TRGAAG1 has three green sections with various amount of flat head screws in each. The shortest length has six screws, the middle length has twenty-four screws and the longest length has eighty-four screws. The 531X137TRGAAG1 has labels for what each screw port does. The 531X137TRGAAG1 has three male metal terminals that are used to connect the 531X137TRGAAG1 with surrounding circuit boards. The 531X137TRGAAG1 has three large dark brown resistors. Resistors are used to disperse energy that is no longer needed. The amount of energy is determined by the banding or markings on the outside of each resistor. The 531X137TRGAAG1 has three circular red condensers. The condensers store energy in an electrical field and do not allow the energy to escape as a resistor would. This allows the 531X137TRGAAG1 to reuse the energy as needed. The 531X137TRGAAG1 has three transformers. The transformers are a static electrical device that transfers electrical energy between two or more circuits. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" across a second coil. The 531X137TRGAAG1 is used for multiple industrial applications. However, this card is considered obsolete. AX Control specializes in obsolete and difficult to find parts. Allow AX Control to be your go too for any and all of your automation needs.

Please call AX Control for a quote or additional information.

","meta_title":"GE CONTROL BOARD","meta_description":"GE CONTROL BOARD","keywords":"GE CONTROL BOARD","series_page_description":"GE CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 15:53:20","prod_pdf":[]},{"id":14135,"part_number":"531X137TRGACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"TERMINAL BOARD GENERAL ELECTRIC","short_desc":null,"content":"

The 531X137TRGACG1 is a TB option card produced by General Electric. The 531X137TRGACG1 has three green sections with various amount of flat head screws in each. The shortest length has six screws, the middle length has twenty-four screws and the longest length has eighty-four screws. The 531X137TRGACG1 has labels for what each screw port does. The 531X137TRGACG1 has two male metal terminals that are used to connect the 531X137TRGACG1 with surrounding circuit boards. The 531X137TRGACG1 has three circular red capacitors. The Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X137TRGACG1 has three transformers. The transformers are a static electrical device that transfers electrical energy between two or more circuits. A varying current in one coil of the transformer produces a varying magnetic field, which in turn induces a varying electromotive force or "voltage" across a second coil. The 531X137TRGACG1 has two light blue resistors. These resistors have colored bands on them. The colored bands correspond with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses.

Please call AX Control for a quote or additional information.

","meta_title":"TERMINAL BOARD GENERAL ELECTRIC","meta_description":"TERMINAL BOARD GENERAL ELECTRIC","keywords":"TERMINAL BOARD GENERAL ELECTRIC","series_page_description":"TERMINAL BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:10:44","prod_pdf":[]},{"id":16875,"part_number":"531X138RDGAAG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":4,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE 531X Drive Board","short_desc":"The 531X138RDGAAG1 is a Rack-Driver Plug Card from GE","content":"

531X138RDGAAG1--Rack Driver Plug Card

The 531X138RDGAAG1 is a Rack Driver Plug Card circuit board component fabricated by GE. This PCB fits into various GE general purpose drive systems like the AC300 or DC300. While typically considered obsolete, the original, flexible design of these drives made them capable of use in industrial settings for many tasks.

The 531X138RDGAAG1 has only a few components on the large, rectangular board. The board allows multiple interconnections to be made in a rack system through one circuit board. It is marked with several codes, including its primary (531x) and secondary (F31x) board numbers, along with VA-4, 002/0, and FR00/0. The top half of the board is populated by six header connectors. There are three 24-pin connectors stacked one below the other on the left board side. On the right side, the three connectors also stack from top to bottom. These connectors include a 9-pin, a 14-pin, and a 16-pin connector. Additionally, there are two lines of vertical pin connectors across the bottom edge. The pins on these connectors are longer and more robust. Each pin is individually labeled and numbered, with labels for the first row located below the connectors and labels for the second row located above them.

No other type of component is located on the surface of the 531X138RDGAAG1. There is no configurable hardware, no integrated circuits, or any kind of component for the handling, division, or resistance of electrical charges. Please refer to data sheets, user guides, or manuals that reference this board for more detailed information like installation guidelines or handling procedures.

","meta_title":"GE 531X Drive Board","meta_description":"GE 531X Drive Board","keywords":"GE 531X Drive Board","series_page_description":"GE 531X Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-19 13:37:45","prod_pdf":[]},{"id":14136,"part_number":"531X138RDGBBG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE 531X Drive Board","short_desc":"The 531X138RDGBBG1 is a Rack Driver Plug Board","content":"

531X138RDGBBG1--Rack Driver Plug Board

The 531X138RDGBBG1 is a board component manufactured by General Electric to fit into their general purpose drive systems. Many of these systems are now considered to be obsolete. However, their original design allowed them to be dynamic, flexible systems capable of many industrial tasks.

The 531X138RDGBBG1 functions as a Rack Driver Plug Card. It is a large rectangular card with only a few components. The board is designed to allow multiple connections to occur within the rack system through a single printed circuit board.

The 531X138RDGBBG1 is marked with several codes, including its alternate board number, VA-4, and FR00/0. The board is designed with three 24-pin header connectors placed one above each other along the left edge of the board. Along the right edge of the board, there is a 9-pin connector, a 14-pin connector, and a 16-pin connector. Below these are two lines of additional connectors. These run parallel to the bottom edge. Each pin on these connectors is individually numbered and labeled.

There are no other components on the surface of the 531X138RDGBBG1 beside the previously described header connectors. The board is drilled for mounting in six places (corners and edges.) More information on board operation, or information on installation or maintenance, may be found through GE publications like series user guides and drive manuals. GE was responsible for all technical support for this and other 531x series boards.

Our team at AX Control wants to exceed your expectations, not just meet them. If there is anything we need to do to improve, we’d love to hear your feedback.

","meta_title":"GE 531X Drive Board","meta_description":"GE 531X Drive Board","keywords":"GE 531X Drive Board","series_page_description":"GE 531X Drive Board","quote_description":null,"inventory_notes":"*NO BOX","cross_reference":"","created_at":null,"updated_at":"2019-03-12 09:59:27","prod_pdf":[]},{"id":14137,"part_number":"531X138RDGBCG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 PACK DRIVER PLUG CARD GE","short_desc":null,"content":"

The 531X138RDGBCG1 is a VA-4 PACK DRIVER PLUG CARD produced by General Electric. The 531X138RDGBCG1 is a circuit board with multiple sets of metal pins. Five sets of the pins are unlabeled. The three other sections of metal pins are all labeled with what each pin can do.

Please call AX Control if you would like more information or a price quote.

","meta_title":"VA-4 PACK DRIVER PLUG CARD GE","meta_description":"VA-4 PACK DRIVER PLUG CARD GE","keywords":"VA-4 PACK DRIVER PLUG CARD GE","series_page_description":"VA-4 PACK DRIVER PLUG CARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:11:21","prod_pdf":[]},{"id":14138,"part_number":"531X139APMAAM6","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Module","short_desc":null,"content":"

The 531X139APMAAM6 is a circuit board created by General Electric. The 531X139APMAAM6 is a large circuit board with many components. The 531X139APMAAM6 has forty-eight Integrated Circuits. The Integrated Circuits contain all the programming data for the 531X139APMAAM6 to function. The Integrated Circuits are split into two groups called EPROM and EEPROM. Both groups hold the programming data the only difference it the EPROM can be programmed with new data when it becomes available while the EEPROM cannot. The 531X139APMAAM6 has one hundred and twenty-two capacitors. Capacitors are used to store an electric charge, consisting of one or more pairs of conductors separated by an insulator. The 531X139APMAAM6 has one hundred and twenty-five resistors. Some of the resistors have colored bands. The colored bands correspond with a color in the code that gives it a numerical value. These numerical values are then used in an equation to calculate the amount of energy the resistor can restrict. The resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used in a multitude of ways such as reducing current flow, adjusting signal levels, dividing voltages, bias active elements, and terminating transmission lines, among other uses. The 531X139APMAAM6 has a crystal oscillator. This device uses crystals to create an electrical signal with a highly precise frequency. The 531X139APMAAM6 has five male terminal ports, that use ribbon style wiring harnesses to connect with other circuit boards.

Please call AX Control for additional information or a quote.

","meta_title":"GE Module","meta_description":"GE Module","keywords":"GE Module","series_page_description":"GE Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-26 16:11:52","prod_pdf":[]},{"id":14139,"part_number":"531X139APMABM6","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PLUG CARD","short_desc":null,"content":"

The 531X139APMABM6 is a circuit board created by General Electric, for industrial purposes. The 531X139APMABM6 is a large circuit board with many components. The 531X139APMABM6 has forty-eight microchips. These microchips (Integrated Circuits, IC) store data for the 531X139APMABM6. They can be split up further based on programmability. The 531X139APMABM6 has one hundred and twenty-two condensers. The 531X139APMABM6 has one hundred and twenty-five resistors. Resistors are used to slow down the flow of energy by dispersing energy that is not being used. However, consult with your engineer about the resistors on the circuit board and what they can handle. If a resistor is hooked up to too strong a power source they will overheat and fail, causing your circuit board to short out. The 531X139APMABM6 has a crystal oscillator. This device uses crystals to create an electrical signal with a highly precise frequency. The most common uses for crystal oscillators are wrist watches, clocks, radios, and even cell phones. The 531X139APMABM6 has five male terminal ports, that use ribbon style wiring harnesses to connect and communicate with other circuit boards. The 531X139APMABM6 has four small silver circular transistors. Transistors can be found in everything from industrial uses to radios.

AX Control specializes in hard to find circuit boards and parts. We strive to be your one stop shop for all your Automation needs.

Please call or email the skilled staff at AX Control for additional information or a quote on the 531X139APMABM6.

** The 531X139APMABM6 is considered an obsolete circuit board.

","meta_title":"GE PLUG CARD ","meta_description":"GE PLUG CARD ","keywords":"GE PLUG CARD ","series_page_description":"GE PLUG CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 16:11:26","prod_pdf":[]},{"id":14140,"part_number":"531X139APMACG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PCB MICRO APPLICATION BOARD","short_desc":null,"content":"

The 531X139APMACG2 is a PCB Micro Application Board. The 531X139APMACG2 is produced by one of the leading companies in the automation industry General Electric. The 531X139APMACG2 has twenty-eight Integrated Circuits or microchips. These relatively small devices are tiny circuit boards that are enclosed and hold the codes to operate the 531X139APMACG2. The 531X139APMACG2 has one hundred capacitors. The capacitors also go by the name condensers because they condense energy into an electrical field. The 531X139APMACG2 has five male terminal ports used in conjunction with wiring harnesses to connect with surrounding circuit boards. The 531X139APMACG2 has twenty-one sets of Jumper Ports. These Jumper Ports have small covers that are used by the engineer to alternate between the Jumper Ports and act like ON / OFF switches to control the energy flow throughout the circuit board. The 531X139APMACG2 has one hundred and nineteen resistors. These resistors are used to expel unneeded energy by converting the energy into heat. The resistors are susceptible to overheating if the power source connected to the circuit board it to high. The 531X139APMACG2 has two green towers with six screws on each tower. These towers allow for up to twelve cables to be secured to the circuit board. The 531X139APMACG2 is considered among the obsolete circuit boards by General Electric. AX Control prides itself in dealing with the obsolete products, that can help get your company back up and running.

Please call or email AX Control’s wonderful staff for a quote or additional information on the 531X139APMACG2.

","meta_title":"GENERAL ELECTRIC PCB MICRO APPLICATION BOARD","meta_description":"GENERAL ELECTRIC PCB MICRO APPLICATION BOARD","keywords":"GENERAL ELECTRIC PCB MICRO APPLICATION BOARD","series_page_description":"GENERAL ELECTRIC PCB MICRO APPLICATION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 14:52:38","prod_pdf":[]},{"id":14141,"part_number":"531X139APMACM7","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE ISO MICRO APPL CARD","short_desc":"","content":null,"meta_title":"GE ISO MICRO APPL CARD","meta_description":"GE ISO MICRO APPL CARD","keywords":"GE ISO MICRO APPL CARD","series_page_description":"GE ISO MICRO APPL CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14142,"part_number":"531X139APMAEG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Micro Application Module","short_desc":null,"content":"

The 531X139APMAEG2 is part of the GE 531X series and is what is known as a PCB Micro Application Board. This board is generally used in industrial applications generally related to drive control. General Electric manufactured this board but it is currently not produced by GE and is classified as obsolete, however, AX Control still can supply this item. This circuit board contains one hundred capacitors, these capacitors provide capacitance, essentially this is a storage of electrical energy contained in an electrical field. The 531X139APMAEG2 has two green towers with six screws on each tower, in addition, 531X139APMAEG2 has five male terminal ports used in conjunction with wiring harnesses to connect with surrounding circuit boards. The 531X139APMAEG2 has twenty-one sets of Jumper Ports. Jumpers are what lets a computer or a circuit board close an electrical circuit. The 531X139APMAEG2 has one hundred and nineteen resistors with strip marks. Resistors, like the ones on this board are color coded which should tell an experienced engineer more information about how the board is to be used. There are several uses for these capacitors including signal adjustment, voltage division, and bias control. The 531X139APMAEG2 has twenty-eight Integrated Circuits which is also known as a monolithic integrated circuit, or an IC, microchip, or even generally simply as a chip. These chips are circuits generally made of silicon the point of which is to hold programming data. On this circuit board the data contained is contained on chips known as EPROM or EEPROM, the difference being that EPROM can be reprogrammed.

","meta_title":"Micro Application Module","meta_description":"Micro Application Module","keywords":"Micro Application Module","series_page_description":"Micro Application Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-27 14:17:07","prod_pdf":[{"id":1867,"product_id":14142,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14143,"part_number":"531X139APMAEM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MICRO APPLICATION GE BOARD","short_desc":"The 531X139APMAEM1 is a Micro Application Board from GE","content":"

531X139APMAEM1--Micro Application Card

The 531X139APMAEM1 is a Micro Application Card manufactured by General Electric for use within general purpose drive systems from GE, such as the AC300 or the DC300. Some older GE general purpose drives are now obsolete, but they were originally designed as powerful industrial systems with the flexibility to take on a wide variety of tasks.

The 531X139APMAEM1 is designed with five relays. These are placed in a single line near the top board edge. They are marked RX1 through RX5. Near these components are three terminal strips. The terminal strips are either three-position or six-position components.

The 531X139APMAEM1 has eight potentiometers and over two dozen resistor network arrays. The board also uses metal film resistors and capacitors made from ceramic and other materials. There are multiple jumper switches on the 531X139APMAEM1, which can be used to tailor how the board works. It has over forty integrated circuits. ICs are marked with manufacturer part numbers that allow for identification of parts. There are also several transistors on the board surface.

Connectors on the 531X139APMAEM1 include the previously mentioned terminal strips, two cable connectors (male) and four header connectors (male.) These connectors can be used to communicate with other boards or with off-board components. The board is marked with reference designators, with identification codes, with board numbers, and with the GE logo.

If more specific information is needed regarding installation or operation of the 531X139APMAEM1, please review GE publications like user guides, data sheets or manuals. GE provided technical support for all 531x series boards.

","meta_title":"MICRO APPLICATION GE BOARD","meta_description":"MICRO APPLICATION GE BOARD","keywords":"MICRO APPLICATION GE BOARD","series_page_description":"MICRO APPLICATION GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-19 10:05:38","prod_pdf":[]},{"id":14144,"part_number":"531X139APMAEM6","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"APPLICATION PCB BOARD GE","short_desc":null,"content":"

The 531X139APMAEM6 is a PCB Micro Application Board. The 531X139APMAEM6 is manufactured by General Electric. General Electric has been in business since 1892 with its first headquarters located in Schenectady, New York. General Electric has sense grow into one over the largest companies and is considered a major contender in automation products. The 531X139APMAEM6 has five male terminal ports used in conjunction with wiring harnesses to connect with surrounding circuit boards. The 531X139APMAEM6 has twenty-one sets of Jumper Ports. These Jumper Ports have small covers that are used by the engineer to move around open or close smaller circuits around the circuit board. The 531X139APMAEM6 has one hundred capacitors. The 531X139APMAEM6 has one hundred and nineteen resistors with strip marks. These strip marks indicate the amount of energy each resistor can effectively disperse. Please consult an experienced engineer for exact measurements. The 531X139APMAEM6 has twenty-eight Integrated Circuits. The Integrated Circuits contain all the programming data for the 531X139APMAEM6 to function. Integrated circuits are also referred to as IC, chips, or microchips. The microchips are there our encased tiny circuit board. The 531X139APMAEM6 has two green towers with six screws on each tower. These towers have small ports at the bottom for wires to be inserted. The screws are placed above each port and are tightened down to secure the wire into place.

Email or call AX Control today for a quote or additional information on the 531X139APMAEM6.

**The 531X128HMSADG is considered an obsolete part.

","meta_title":"APPLICATION PCB BOARD GE","meta_description":"APPLICATION PCB BOARD GE","keywords":"APPLICATION PCB BOARD GE","series_page_description":"APPLICATION PCB BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 09:50:20","prod_pdf":[]},{"id":14145,"part_number":"531X139APMAFM1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"APPLICATION GE BOARD","short_desc":null,"content":"

The 531X139APMAFM1 is a PCB Micro Application Board. The 531X139APMAFM1 is manufactured by General Electric. The 531X139APMAFM1 has five male terminal ports used in conjunction with wiring harnesses to connect and communicate with surrounding circuit boards. The 531X139APMAFM1 has one hundred condensers. Condensers can also be referred to as capacitors in certain manuals. The 531X139APMAFM1 has two green towers, one with six screws and the other has four screws. These towers are used to attach wires to the circuit board and the screws in the top of the towers secure the wires into place. The 531X139APMAFM1 has twenty-one sets of Jumper Ports. Jumper Ports allow different circuits (energy paths) to be open and closed around the entire circuit board using small slip-on covers. The 531X139APMAFM1 has one hundred and nineteen resistors with strip marks. Consult your companies lead engineer to assess the resistors energy dispersing capability and to ensure the circuit board is installed properly to prevent overheating issues. The 531X139APMAFM1 has twenty-eight microchips. The microchips contain all the programming data for the 531X139APMAFM1 to function. The microchips may also be called by various names depending on the who wrote the manuals or who is selling the products. They are also referred to as chips, Integrated Circuits, or abbreviated to IC. There are also subgroups of microchips based on the programmability of the chip.

If you would like more information in the 531X139APMAFM1 please call or email AX Control.

","meta_title":"APPLICATION GE BOARD","meta_description":"APPLICATION GE BOARD","keywords":"APPLICATION GE BOARD","series_page_description":"APPLICATION GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 08:51:52","prod_pdf":[]},{"id":14146,"part_number":"531X139APMAGM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC BOARD GENERAL ELECTRIC","short_desc":"","content":null,"meta_title":"PC BOARD GENERAL ELECTRIC","meta_description":"PC BOARD GENERAL ELECTRIC","keywords":"PC BOARD GENERAL ELECTRIC","series_page_description":"PC BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14147,"part_number":"531X139APMAHG2","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE APPLICATION BOARD","short_desc":null,"content":"

The 531X139APMAHG2 is a circuit board produced by General Electric. The 531X139APMAHG2 is a large circuit board and has many smaller components and is meant for industrial applications. The 531X139APMAHG2 has one hundred and twenty capacitors. These capacitors vary in size and shape, but they all perform the same duty. A capacitor creates an electrical field that is then used to house additional energy for the circuit board. The 531X139APMAHG2 has twenty-one diodes. Each diode allows for a one-way energy path through it. The 531X139APMAHG2 has one hundred and thirty resistors (some have colored banding). Each resistor is designed to eliminate a certain amount of energy. As the resistor eliminates the energy it is turned into heat. If the energy current is too high and the resistor isn’t equipped to handle it the resistors can overheat and cause damage to the circuit board. The 531X139APMAHG2 has thirty chips. The chips hold information for the circuit board. The chip also goes by the names microchip, IC, or Integrated Circuit. The 531X139APMAHG2 has around twenty Jumper Ports. Jumper Ports are the equivalent to moveable switches. They use a slip-on cover that can open or close a circuit. The 531X139APMAHG2 has four male terminal ports. These ports are used to attach the circuit board within the existing system. AX Control is a conveyer of obsolete and hard to find products for the automation industry.

AX Control’s knowledgeable staff is available through email or by phone. If you would like more information or a quote get in touch with us today.

","meta_title":"GE APPLICATION BOARD","meta_description":"GE APPLICATION BOARD","keywords":"GE APPLICATION BOARD","series_page_description":"GE APPLICATION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 13:36:05","prod_pdf":[]},{"id":14148,"part_number":"531X139APMAJG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Fanuc Industrial Drive Board","short_desc":null,"content":"

The 531X139APMAJG2 is a circuit board produced by General Electric for industrial purposes. The 531X139APMAJG2 is a large circuit board and has many smaller components working as one to accomplish the circuit boards purpose. The 531X139APMAJG2 has one hundred and twenty various sized and shaped capacitors. Depending on the manual you look at capacitors are also referred to as condensers or condensators. Regardless of what they are referred to as they serve the same purpose of housing energy. The 531X139APMAJG2 has twenty-one diodes. Diodes are like one-way streets on the circuit board they only allow the energy to flow through them in a single direction. To determine which way the energy flows most diodes have a small strip at one end of them. The energy flows towards that strip. The 531X139APMAJG2 has one hundred and thirty resistors (some have colored banding). Resistors are used to restrict and disperse unnecessary energy. The 531X139APMAJG2 has thirty chips. The chips hold data for the circuit board. Chips are also referred to as microchips, IC’s, or Integrated Circuits. Some chips are reprogrammable (EPROM) while others are not (EEPROM). The 531X139APMAJG2 has around twenty Jumper Ports. Jumper Ports are used to open or close smaller individual circuits around the circuit board. In order for this to be accomplished the Jumper Ports have slip-on covers that work as a switch to open or close a particular circuit. The 531X139APMAJG2 has four male terminal ports. The male terminal ports allow the 531X139APMAJG2 to communicate and get a power supply from surrounding circuit boards.

Please email or call AX Control today for additional information.

","meta_title":"GE Fanuc Industrial Drive Board","meta_description":"GE Fanuc Industrial Drive Board","keywords":"GE Fanuc Industrial Drive Board","series_page_description":"GE Fanuc Industrial Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 09:23:14","prod_pdf":[{"id":1866,"product_id":14148,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14149,"part_number":"531X139APMAKG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Industrial PC Module","short_desc":"The 531X139APMAKG2 is a GE Industrial PC Module","content":"

The 531X139APMAKG2 is a board component designed and manufactured by General Electric. This PCB is designed to fit the DC-300 general purpose drive and several other similar drive systems from General Electric. These systems are powerful, flexible drives that are typically used in industrial settings. Please review your system’s manual or user guide to establish compatibility.

The 531X139APMAKG2 is a rectangular board that functions as an Application Card. This optional card allows for analog interfaces between external equipment and the control card, which allow the core drive to handle functions needed in applications like material handling cranes and machine tool spindles. The board is marked with an optional board number (F31X139APMAJ2,) as well as FR00/0, 88-45, VA-4, and 002/0. The board is drilled at the corners and on the edges of the board for mounting.

The 531X139APMAKG2 has five relays located toward its upper edge. It has two terminal strips with six screw connections. The board has four header connectors. These vary from two-pins to twenty-four pins. One vertical male pin cable connector is located in the upper left corner and a second is located a few inches below the first.

The 531X139APMAKG2 uses surface wiring in several locations. It has over thirty jumper switches, as well as a few individual terminal pins. The board is populated by over thirty resistor network arrays, four potentiometers, and four transistors. It uses ceramic and electrolytic capacitors. Resistors are typically made from metal film material. The board has multiple integrated circuits including analog D/A converters and analog operational amplifiers. More information on the board and its use may be found through manuals, data sheets or user guides that reference the board number or the series.

","meta_title":"GE Industrial PC Module","meta_description":"GE Industrial PC Module","keywords":"GE Industrial PC Module","series_page_description":"GE Industrial PC Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-27 08:55:46","prod_pdf":[{"id":1865,"product_id":14149,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14150,"part_number":"531X139APMAKM7","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD","short_desc":null,"content":"

The 531X139APMAKM7 is a circuit board manufactured by General Electric and is meant for industrial use. The 531X139APMAKM7 has one hundred and forty-five resistors. Some of these resistors have colored strips. The 531X139APMAKM7 has one small silver crystal oscillator. A crystal oscillator uses the mechanical resonance of a vibrating crystal to create an electrical signal with a precise frequency. The crystal oscillators are also commonly found in clocks and watches. The 531X139APMAKM7 has one red light emitting diodes (LED) which is a diode that lights up as an electrical current passes through it. The 531X139APMAKM7 has fifty-eight IC’s or Integrated Circuits. The IC’s are encased circuit boards used to hold programming information. Some IC’s can be re-programmed they are called EPROM and the others that cannot be re-programmed are called EEPROM. The 531X139APMAKM7 has one-hundred and twenty-two capacitors. The 531X139APMAKM7 has three green plastic towers with metal screws on the top. There are two towers with six screws and the other tower has three screws. The 531X139APMAKM7 has five male terminal ports that use wire ribbon harnesses that connect to other circuit boards. The 531X139APMAKM7 has eight small blue squares that are known as Potentiometers or Variable Resistors. The Variable Resistors are used to control energy flow by turning a dial.

Please call AX Control for any information.

**Each circuit board is shipped in an anti-static sleeve.

","meta_title":"GE CIRCUIT BOARD","meta_description":"GE CIRCUIT BOARD","keywords":"GE CIRCUIT BOARD","series_page_description":"GE CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 15:18:31","prod_pdf":[]},{"id":14151,"part_number":"531X139APMALG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit Board by General Electric","short_desc":null,"content":"

The 531X139APMALG2 is a circuit board manufactured by General Electric. The 531X139APMALG2 has one hundred and twenty-six resistors. Some of these resistors have colored strips. These strips allow the engineer to determine how much energy that resistor can convert into heat and get rid of. The 531X139APMALG2 has thirty-five Integrated Circuits (IC, microchip, chip). The Integrated Circuits contain all the programming data for the 531X139APMALG2 to function. Integrated Circuits are also split into a smaller subgroup EPROM if programmable and EEPROM if they are not programmable. The 531X139APMALG2 has one-hundred and twenty capacitors. Capacitors create electronic fields to store energy for the circuit board. The 531X139APMALG2 has two green plastic towers with six metal screws on the top. These towers are used to connect additional wires to the circuit board. The 531X139APMALG2 has three male terminal ports that use wire ribbon harnesses that connect to other circuit boards. The 531X139APMALG2 has four small blue squares that are known as Potentiometers or Variable Resistors. The Variable Resistors can be adjusted by the white flat head top to control how much energy can pass through them. You see Variable Resistors every day like the volume knob on the radio in your house or car or light the light dimmer in your house.

Please call or email AX Control for any information.

**Each circuit board is shipped in an anti-static sleeve.

","meta_title":"Circuit Board by General Electric","meta_description":"Circuit Board by General Electric","keywords":"Circuit Board by General Electric","series_page_description":"Circuit Board by General Electric","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 14:12:39","prod_pdf":[{"id":1864,"product_id":14151,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14152,"part_number":"531X139APMALM7","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":6,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"ISO MICRO APPL CARD GE","short_desc":"The 531X139APMALM7 is an ISO Micro Application Card","content":"

531X139APMALM7--ISO Micro Application Card

The 531X139APMALM7 is a printed circuit board component made by GE to fit into various systems, including several general purpose drive systems like the DC-300 or the AC-300 drives. These drives were originally designed for use in industrial applications.

The 531X139APMALM7 functions as an ISO Micro Application Card. There are several versions of this card in the 531x series. This is a large board that is dense with components. It has several codes printed on the board surface, including a secondary F31X identification number.

The 531X139APMALM7 has eight potentiometers. Four of these are placed in the bottom left corner of the board and are labeled AN1 SCL, AN2, P1, and P2. The board has a single LED indicator. This indicator is red and is located in the bottom right quadrant. There are over thirty resistor network arrays used, along with traditional metal film resistors. Most capacitors are made from ceramic material.

The 531X139APMALM7 communicates with other boards through its three terminal strips (one three-position and two six-position,) its four header connectors, and its two vertical pin male cable connectors. Other components on the board include over 45 integrated circuits, four relays, jumper switches, TP test points, and diodes. The board is drilled in multiple locations.

AX Control treats all 531x boards as static sensitive. We store and ship all boards in this series in a protective anti-static wrap. Please refer to the board’s data sheet for unboxing requirements; some boards require the use of a grounding strap. Please refer to GE publications like manuals or user guides for more information, including detailed installation instructions.

","meta_title":"ISO MICRO APPL CARD GE","meta_description":"ISO MICRO APPL CARD GE","keywords":"ISO MICRO APPL CARD GE","series_page_description":"ISO MICRO APPL CARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-18 09:05:15","prod_pdf":[]},{"id":14153,"part_number":"531X139APMAMG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MICRO ANALOG BOARD","short_desc":null,"content":"

The 531X139APMAMG2 is a circuit board manufactured by General Electric. The 531X139APMAMG2 has one hundred and twenty-one resistors. The 531X139APMAMG2 has thirty-six Integrated Circuits. The Integrated Circuits are referred to as chips, IC or microchips depending on the manual however they are all the same. The store any data the 531X139APMAMG2 to operate. The Integrated Circuits are further split into a subgroup based on their programmability. The 531X139APMAMG2 has one-hundred and twenty capacitors. Capacitors create an electrical field that stores energy, without allowing the energy to be lost. Other names for capacitors are condenser or condensator. These two names are considered the original names for this part and are still used today. The 531X139APMAMG2 has two green plastic towers with six metal screws on the top. The 531X139APMAMG2 has three male terminal ports that use wire ribbon harnesses that connect to other circuit boards. The 531X139APMAMG2 has four small blue squares that are known as Potentiometers or Variable Resistors. The Variable Resistors can be adjusted by the white flat head top to control how much energy can pass through them. Variable Resistors are used in other applications such as volume control for radios and adjustable lights to name a couple.

Please email or call AX Control for any additional information or for a quote.

*General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.

**Each circuit board is shipped in an anti-static sleeve.

","meta_title":"GE MICRO ANALOG BOARD","meta_description":"GE MICRO ANALOG BOARD","keywords":"GE MICRO ANALOG BOARD","series_page_description":"GE MICRO ANALOG BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 10:10:13","prod_pdf":[]},{"id":14154,"part_number":"531X139APMAMM7","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":10,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC Board Card Module","short_desc":null,"content":"

The 531X139APMAMM7 is a circuit board manufactured by General Electric. The 531X139APMAMM7 has one red light emitting diodes (LED) which is a diode that lights up as an electrical current passes through it. The 531X139APMAMM7 has five male terminal ports that use wire ribbon harnesses that connect to other circuit boards. The 531X139APMAMM7 has fifty-three Integrated Circuits. The Integrated Circuits contain all the programming data for the 531X139APMAMM7 to function. The 531X139APMAMM7 has one-hundred and thirty-one capacitors. The 531X139APMAMM7 has three green plastic towers with metal screws on the top. There are two towers with six screws and the other tower has three screws. The 531X139APMAMM7 has eight small blue squares that are known as Potentiometers or Variable Resistors. The Variable Resistors can be adjusted by the white flat head top to control how much energy can pass through them. Variable Resistors are also used every day in the switches for light dimmers and to control the volume of the radio. The 531X139APMAMM7 has one hundred and forty-five resistors. They are used to turn unused energy into heat to get rid of it. The 531X139APMAMM7 has one small silver crystal oscillator. A crystal oscillator uses the mechanical resonance of a vibrating crystal to create an electrical signal with a precise frequency.

Please call or email AX Control for any information.

**Each circuit board is shipped in an anti-static sleeve.

","meta_title":"PC Board Card Module","meta_description":"PC Board Card Module","keywords":"PC Board Card Module","series_page_description":"PC Board Card Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-28 15:22:50","prod_pdf":[{"id":1863,"product_id":14154,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14155,"part_number":"531X139APMANG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Application Card Unit","short_desc":null,"content":"

The 531X139APMANG2 by General Electric is considered an Application Card. The 531X139APMANG2 uses multiple components to control the energy flow around the board. Such as Variable Resistors to control how much or how little energy flows. Jumper Ports to open and close certain individual circuits around the circuit board. Diodes to direct the energy to flow in a single direction, much like a one-way street. If the 531X139APMANG2 needs to store energy it is placed into condensers also called capacitors. These components use an electrical field they create to house the energy. If the 531X139APMANG2 needs to rid itself of energy it sends it to the resistors. The resistors let a certain amount of energy pass through and then turns the rest into heat to get rid of it. If the 531X139APMANG2 is hooked up to a power source that is to strong the resistors do run the risk of overheating. To communicate and draw power from its surroundings the 531X139APMANG2 has six male terminals that are used with ribbon harnesses. The 531X139APMANG2 controls all of this activity using its many microchips. Each microchip is a small circuit board of its own that is used to hold information about how the 531X139APMANG2 is to perform. The microchips are split into two groups based on programmability. In the manual you may find microchip referred to by its other names chip, IC, or Integrated Circuit. The 531X139APMANG2 is considered an out of data circuit board. However, AX Control can help you get it.

Call or email AX Control today.

","meta_title":"GE Application Card Unit","meta_description":"GE Application Card Unit","keywords":"GE Application Card Unit","series_page_description":"GE Application Card Unit","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 08:58:46","prod_pdf":[{"id":1862,"product_id":14155,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14156,"part_number":"531X139APMANM7","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Circuit PC Industrial Board","short_desc":null,"content":"

The 531X139APMANM7 was manufactured by General Electric. General Electric has since stopped producing this circuit board and has dubbed it obsolete. Here at AX Control we stock obsolete and hard to find products. We strive to be your one stop shop for all your automation needs. The 531X139APMANM7 is known as a Micro Application card. The 531X139APMANM7 uses many components to achieve its purpose. The 531X139APMANM7 uses chips to hold all the instruction the circuit board is meant to follow. These chips also referred to as Integrated Circuits or microchips are varies sized encased circuit boards. The 531X139APMANM7 stores energy as needed in components referred to as condensers or capacitors. In order to store the energy, the condensers (capacitors) create an electrical field as the energy passes through it. If the 531X139APMANM7 should need to rid itself of unneeded energy it is done through the many restrictors that convert the energy into heat. The 531X139APMANM7 uses Jumper Ports to open and close smaller circuits across the circuit board using small movable covers that act as an ON / OFF switch. The 531X139APMANM7 uses Variable Resistors to control the volume of energy that travels through the circuit board. It uses a knob to accomplish this. Variable Resistors can also be found in every day items like your volume knob on your radio. The 531X139APMANM7 has a small piece called a crystal oscillator. Like the name suggests it uses a crystal to create a specific and precise frequency.

Please call or email the staff at AX Control for more information.

","meta_title":"Circuit PC Industrial Board","meta_description":"Circuit PC Industrial Board","keywords":"Circuit PC Industrial Board","series_page_description":"Circuit PC Industrial Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 09:31:24","prod_pdf":[{"id":1860,"product_id":14156,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14157,"part_number":"531X139APMAPG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Drive Application Board","short_desc":null,"content":"

The 531X139APMAPG2 was manufactured by General Electric. The 531X139APMAPG2 is referred to as an Application PCB Card. The 531X139APMAPG2 easily connects to your current system using two green female terminals with screw points along the top. These terminals are used connect wires to the circuit board and the screws secure them into place. The 531X139APMAPG2 also uses ribbon style wiring harnesses to connect to the six male style terminals (named so for the metal prongs). The 531X139APMAPG2 uses Variable Resistor to control the input of energy into the circuit board. Along with the traces around the circuit board that carries the energy the 531X139APMAPG2 uses diodes to direct the flow of energy one-way. Resistors are used to reduce energy flow, by turning a certain amount of energy into heat as the electrical current passes through them. Consult an experienced engineer to determine how much energy the restores convert. The 531X139APMAPG2 also has a need to store energy as well. The 531X139APMAPG2 uses a module that creates an electrical field called a condenser to store the energy. The condenser also doesn’t allow any energy to escape during this process. The 531X139APMAPG2 also has many smaller circuits that around the entire circuit board. These smaller circuits are controlled by movable ON / OFF switches known as Jumper Ports.

AX Control is available through email or by phone. Feel free to contact the knowledgeable staff for more information about the 531X139APMAPG2 including a price quote.

","meta_title":"GE Drive Application Board","meta_description":"GE Drive Application Board","keywords":"GE Drive Application Board","series_page_description":"GE Drive Application Board","quote_description":null,"inventory_notes":"NO BOX","cross_reference":"","created_at":null,"updated_at":"2018-11-29 10:16:30","prod_pdf":[{"id":1861,"product_id":14157,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14158,"part_number":"531X139APMARM7","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Industrial Drive Board","short_desc":null,"content":"

General Electric is the maker of the 531X139APMARM7. The 531X139APMARM7 is called an Industrial Drive board. As a large contender in the industrial world the original companies have been around since 1876 (Thomas Edison laboratory) and 1879 (Thomas-Houston Electric Company). General Electric was created by the merger of Edison General Electric and Thomas-Houston in 1892. The 531X139APMARM7 has many Jumper Ports with small caps. The 531X139APMARM7 has over one hundred resistors to dispel heat. The 531X139APMARM7 capacitors (condensers) to house energy. In order to link into your system, use the multiple male and female terminals. The 531X139APMARM7 uses an LED light. The 531X139APMARM7 stores information in the multiple Integrated Circuits. These are also called IC’s, chip, or microchips. This depends on which manual you use as a reference. The 531X139APMARM7 also has multiple Potentiometers to control energy flow. The 531X139APMARM7 is an antiquated circuit board. Please consult with your companies engineer and the General Electric’s manuals for safety procedures. The engineer can assist in placing the 531X139APMARM7 in the correct location in your machinery set up. Along with proper power hook ups to prevent any damage to the circuit board. Here at AX Control we aspire to be your first stop for your automation requirements. Whether it’s finding that out dated part or repairing your existing part. We offer warranties as well with each part.

If you would like to obtain more material on the 531X139APMARM7 or any other services that AX Control offers, please contact us via email or by phone.

","meta_title":"GE Industrial Drive Board","meta_description":"GE Industrial Drive Board","keywords":"GE Industrial Drive Board","series_page_description":"GE Industrial Drive Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 13:09:10","prod_pdf":[{"id":1859,"product_id":14158,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":16444,"part_number":"531X139APMASG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BOARD","short_desc":"The 531X139APMASG2 is a GE Micro Application Card","content":"

531X139APMASG2--GE Micro Application Card

The 531X139APMASG2 fits into a number of GE’s general purpose drive systems, including the AC300 and the DC300. This PCB component is a multipurpose component rather than a system specific board. Please consult your system’s manual to determine compatibility.

The 531X139APMASG2 has a number of components for communicating with other boards or off-board components. This includes three terminal strips. One strip has three screw connections and the other two have six screw connections each. The board has three cable connectors (male vertical pin.) Two are located on the left side of the board and the other is located on the bottom right. It also has four vertical pin header connectors that vary between 2-pins and 24-pins.

The 531X139APMASG2 has over thirty resistor network arrays. RNAs are essentially a combination of several resistors. They are used to divide the voltage in a circuit into smaller amounts. Metal film resistors are also used. There are eight potentiometers on the board’s surface. Capacitors tend to be made of ceramic material. However, some capacitors are made of other materials, like aluminum electrolytic and polyester vinyl.

Other components used on 531X139APMASG2 include five relays, over forty integrated circuits, transistors, and jumper switches. Reference designators are used to mark components for easy identification. If more information is needed, please refer to publications from General Electric like series user guides, manuals, or data sheets. Technical support for this series of boards was originally provided by the original equipment manufacturer. Please read and follow all recommended handling and safety procedures.

","meta_title":"GENERAL ELECTRIC BOARD","meta_description":"GENERAL ELECTRIC BOARD","keywords":"GENERAL ELECTRIC BOARD","series_page_description":"GENERAL ELECTRIC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-19 09:01:42","prod_pdf":[]},{"id":14159,"part_number":"531X139APMASM7","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Board 16632. Call Now!","short_desc":null,"content":"

General Electric created the 531X139APMASM7 for industrial applications. The 531X139APMASM7 is very similar to most other circuit boards in the 531X. The 531X139APMASM7 has many smaller electronic circuits that are encased in a chip normally made of silicon used to program the 531X139APMASM7. These chips are also known as microchips or Integrated Circuits (IC). The 531X139APMASM7 has a single crystal oscillator. The first crystal oscillator was invented in 1917 and the technology patented the following year in 1918. Now crystal oscillators can be found in devices we use every day such as cell phones, radios, clocks, and wrist watches. The 531X139APMASM7 has rheostats also called Variable Resistors or Potentiometers. These devices control small amounts of energy no more than a watt or so. The 531X139APMASM7 can also store energy if required in condensators. Manuals may also refer to these pieces as a capacitor (generally used term in America) or a condenser (widely used term outside of the United States). The 531X139APMASM7 also has many “one-way” streets in a sense with the use of diodes. The diode only lets the energy move through them in a single direction. The 531X139APMASM7 also uses resistors that can adjust the flow of electrical current. Most of the resistors on the 531X139APMASM7 are known as axial-lead resistors and can be identified by their multiple colored marks. The electrical function of each resistor varies and is specified by its resistance. Refer to General Electric’s manual for the 531X139APMASM7 for more details.

AX Control is waiting to hear from you. You may contact our staff by phone or email.

","meta_title":"GE Board 16632. Call Now!","meta_description":"GE Board 16632. Call Now!","keywords":"GE Board 16632. Call Now!","series_page_description":"GE Board 16632. Call Now!","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 14:28:12","prod_pdf":[{"id":1858,"product_id":14159,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14160,"part_number":"531X139APMATG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Application Drive Card","short_desc":null,"content":"

General Electric is a leader in automation technology as well many other areas. General Electric manufactured the 531X139APMATG2 for industrial use. The 531X139APMATG2 is labeled as an application board. The 531X139APMATG2 uses rainbow colored wiring harnesses to connect to the existing system. The 531X139APMATG2 has many small silicon chips. These chips are their own little circuits boards that have a cover. Their purpose is to contain all the information and data that is necessary for the 531X139APMATG2 to perform its duty. The chips may also be referred to as IC’s (Integrated Circuits) or microchips. The first integrated circuit was developed in 1949. The 531X139APMATG2 has many capacitors also know as condensers. The first discovery of condensers happened in 1745. The 531X139APMATG2 uses diodes to direct energy flow. The first diodes were created in 1873 and were called vacuum tube diodes and have grown from there. The 531X139APMATG2 has a large array of axial-lead resistors. These are used to reduce energy flow. There are small components used to control about a watt of power each known as variable resistors, also called rheostats or potentiometers. General Electric has been around for a long time and has become a large contender in the industrial world. The original companies named Thomas Edison laboratory was developed in 1876 and Thomas-Houston Electric Company which was formed in 1879. These two companies then merged in 1892 to form General Electric and have taken the world by storm.

For more information please email or call the skilled staff at AX Control.

","meta_title":"Application Drive Card","meta_description":"Application Drive Card","keywords":"Application Drive Card","series_page_description":"Application Drive Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 15:28:26","prod_pdf":[{"id":1856,"product_id":14160,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14161,"part_number":"531X139APMAXG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Micro Application Module","short_desc":"The 531X139APMAXG2 is a GE Micro Application Module","content":"

The 531X139APMAXG2 is a GE board component manufactured for general purpose drive systems like the DC-300. These drives, which are most often used for industrial applications, are powerful, flexible systems capable of many uses.

The 531X139APMAXG2 is a rectangular board marked with codes 002/2, 94V-0, FR01/0, 004/0 and 005/0. The board’s alternate board number is F31X139APMALG2. It is drilled in all corners and has four additional drill holes located along its edges.

The 531X139APMAXG2 is populated with multiple integrated circuits, five relays, four potentiometers, over twenty-five resistor network arrays, and a jumper switch. The board has two terminal strips. These are placed facing each other and have six screw connections per component. Other connectors on the board include two vertical pin cable connectors, both male, and four vertical pin header connectors. Locations for many other components are marked on the board but are not filled with components; these components may be used in other board versions.

Installation parameters for the 531X139APMAXG2 are provided by the original manufacturer through data sheets or the device manual. Following these instructions will significantly reduce the risk of accidents or possible damage to components. Only properly trained personnel should install or handle this or other 531X boards. Technical support for this series was originally provided by General Electric.

Please contact our sales team at AX Control with any questions you have about this or any other product on our site. A team member is ready to provide a quote and turnaround time, as well as answer your questions about repair, warranty, shipping, or our exchange program.

","meta_title":"GE Micro Application Module","meta_description":"GE Micro Application Module","keywords":"GE Micro Application Module","series_page_description":"GE Micro Application Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-28 13:28:37","prod_pdf":[{"id":1857,"product_id":14161,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14162,"part_number":"531X139APMAYG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Application Card Manufactured by GE","short_desc":null,"content":"

The 531X139APMAYG2 is an application card was produced by General Electric. General Electric has since discontinued production of this circuit board. The 531X139APMAYG2 has multiple connection points to attach it to your existing setup. These connection points require wiring harnesses. The 531X139APMAYG2 has microchips that store the instructions for the circuit board to operate. The 531X139APMAYG2 uses rheostats to control tiny amounts of energy. Manuals will also be called potentiometer or variable resistors and are controlled by a dial. The 531X139APMAYG2 stores' energy in variously sized capacitors. These capacitors are also called condensators or condensers these two terms are widely used around the world while they are mostly called capacitors in the United States. The 531X139APMAYG2 has a large number of Jumper Ports. Using the Jumper Ports an engineer can control and alter different circuits around the boards by turning them ON or OFF with a small cap. The 531X139APMAYG2 uses resistors to disperse energy as needed. An engineer can determine the amount of energy each resistor is capable of dispersing. General Electric has been a forerunner in the Industrial community. The company was founded in 1879 when Thomas-Houston Electric Company and Thomas Edison Laboratory.

If you would like to get a price quote or additional material please reach out to the knowledgeable and skilled staff of AX Control.

","meta_title":"Application Card Manufactured by GE","meta_description":"Application Card Manufactured by GE","keywords":"Application Card Manufactured by GE","series_page_description":"Application Card Manufactured by GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-29 16:54:17","prod_pdf":[{"id":1855,"product_id":14162,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14163,"part_number":"531X140CCHAMM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 Control Card by GE","short_desc":"The 531X140CCHAMM2 is a GE Control Board","content":"

531X140CCHAMM2--Control Card

The 531X140CCHAMM2 is a circuit board originally fabricated by General Electric as part of the DC-300, the AC-300 and other general purpose drive systems.

The 531X140CCHAMM2 functions as a Control Card. There are several versions of the Control Card PCB within the 531x series; please check your system manual for compatibility suggestions. The board is component dense and is drilled in each corner for mounting. It has eight standoffs mounted into its surface that allows the addition of two auxiliary boards. The board is also marked with a number of codes and with an optional F31X board number.

The 531X140CCHAMM2 has eight connectors on its surface, including two male header connectors and six male vertical pin cable connectors. These connectors allow for communication with on-board and with off-board components, including other boards. The board has surface wiring in at least two places.

The 531X140CCHAMM2 has jumpers in over twenty locations. It has eight potentiometers, twenty-five resistor network arrays, and thirty-plus integrated circuits. ICs include oscillating chips. There are six LED indicators in a single line near the top left corner of the board. Other components include transistors, capacitors, diodes, and resistors. Capacitors are made from a wide variety of materials, including ceramic, polyester vinyl, and electrolytic. Resistors are typically made from metal film.

More information on the 531X140CCHAMM2 and its individual components may be accessed through publications originally provided by the manufacturer, such as data sheets, user guides, or manuals. GE provided all technical support for this board and other 531x series components.

","meta_title":"VA-4 Control Card by GE","meta_description":"VA-4 Control Card by GE","keywords":"VA-4 Control Card by GE","series_page_description":"VA-4 Control Card by GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-14 10:50:40","prod_pdf":[{"id":1854,"product_id":14163,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14164,"part_number":"531X140CCHANM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PRINTED CIRCUIT BOARD","short_desc":"","content":null,"meta_title":"GE PRINTED CIRCUIT BOARD","meta_description":"GE PRINTED CIRCUIT BOARD","keywords":"GE PRINTED CIRCUIT BOARD","series_page_description":"GE PRINTED CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14165,"part_number":"531X140CCHASM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"AC500 Drive Control Card","short_desc":"The 531X140CCHASM2 is an AC 500 Drive Control Card","content":"

The 531X140CCHASM2 is a board component manufactured by GE as part of the 531X series. The 531X series of PCBs are general purpose circuit boards designed as parts for a variety of GE’s general purpose drives. The 531X140CCHASM2 board is primarily used as a Drive Control Card for an AC500 drive.

The 531X140CCHASM2 is a larger board that has been drilled in each corner for screw mounting. It has eight standoffs already mounted to the surface of the board, which allow for installation of two optional auxiliary boards. These auxiliaries screw mount into the top of the standoffs, which hold them in pace. They communicate with the motherboard through cable connections plugged into one of the six male vertical pin cable connectors located on the surface of the 531X140CCHASM2. This board also has two vertical pin header connectors.

The 531X140CCHASM2 has a single push-button switch component. There are eleven transistors on the surface of the board, of various designs. The board has multiple jumper switches, as well as over twenty resistor network arrays and seven potentiometers. The board makes use of metal film resistors, electrolytic capacitors, and capacitors made from polyester vinyl and ceramic materials. Surface wiring is evident. The board has more than thirty integrated circuits.

The 531X140CCHASM2 has a single line of six LED indicators. These are located in the upper left quadrant of the board. Each of these components is red, and each is numbered in sequence. The board is marked with several codes, including VA-4, FR00/0 and 003/0. It has an alternate board number of F31X300CCHAFG1. Installation procedures may be found through manufacturer user guides or data sheets.

","meta_title":"AC500 Drive Control Card","meta_description":"AC500 Drive Control Card","keywords":"AC500 Drive Control Card","series_page_description":"AC500 Drive Control Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-06 08:47:31","prod_pdf":[{"id":1853,"product_id":14165,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":16445,"part_number":"531X140CCHATM2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC CONTROL BOARD","short_desc":null,"content":"

The 531X140CCHATM2 is a large control card manufactured by General Electric. The control card is used to operate various General Electric drives. This card may also go by the part number F31X300CCHAFGIFR01.

With this circuit board being bigger it utilizes many smaller components to function. The parts placed on this circuit board are various styles of resistors ranging from small to large in size. Variously sized diodes, capacitors (condensers), multiple various resistors, jumper pins, LED lights, crystal oscillators, connection terminals, transistors and integrated circuits (EPROM (programmable) EEPROM (not programmable)).

This particular control card is large enough to support two smaller daughter boards (or smaller circuit boards). These daughter boards would sit atop one of the two sets of four pegs.

Speak with a professional engineer to decide how best to set the adjustable components of this circuit board to work best in the drive and for the purpose you need it for. General Electric has also published multiple works in regard to the drive and the series in which they are compatible with. The works may be referred to as data sheets, user’s manual (guides), and instructional manual.

The circuit board and the drives it was used are considered obsolete, making these devices hard to acquire. AX Control specializes in these hard to acquire circuit boards and they drive that they power. AX Control’s professional staff is available to help you decide which circuit board will best assist your needs. Our staff is able to provide quotes that will fit your budget and the best type of shipping for your situation. We offer expedited shipping and all our circuit boards come in a static shield and proper padding.

","meta_title":"GENERAL ELECTRIC CONTROL BOARD","meta_description":"GENERAL ELECTRIC CONTROL BOARD","keywords":"GENERAL ELECTRIC CONTROL BOARD","series_page_description":"GENERAL ELECTRIC CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-15 09:32:13","prod_pdf":[]},{"id":14166,"part_number":"531X140CCHAYM2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Control Card","short_desc":"The 531X140CCHAYM2 is a GE Control Card.","content":"

The 531X140CCHAYM2 is a PCB component fabricated to be a part of the DC-300 and other general purpose drives that are produced by GE.

The 531X140CCHAYM2 communicates with other boards and off-board components through connectors like its six male vertical pin cable connectors and two header connectors. The board has a line of pin socket connectors on its right edge and another near the center of the board. Each of these pins is individually labeled. The cable connectors may be used to communicate with optional auxiliary boards connected to the board via screw connections threaded into the standoffs already connected to the board surface. There are eight of these standoffs attached to the 531X140CCHAYM2.

The 531X140CCHAYM2 has one switch component. This is a push button switch, and it is located in the lower left quadrant of the board. There are six red LED indicators placed in a single line toward the upper left. The board has metal film resistors, resistor network arrays (over 20,) and seven potentiometers. The board uses capacitors made from ceramic material, electrolytic material, and polyester vinyl. The board also has an inductor and over ten transistors.

The 531X140CCHAYM2 has multiple integrated circuits. This includes operational amplifiers and analog bus drivers. The board has twenty-five jumper switches. This board is marked with codes like 006/03, 002/02, and with a secondary board number F31X300CCHALG2.

More information about the 531X140CCHAYM2 may be accessed through GE publications like data sheets, manuals, or series user guides. GE was responsible for the original technical support for this board series.

","meta_title":"Control Card","meta_description":"Control Card","keywords":"Control Card","series_page_description":"Control Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-06 09:31:27","prod_pdf":[]},{"id":14167,"part_number":"531X144DRGAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DIAGNOSTIC READOUT CARD","short_desc":null,"content":"

The 531X144DRGAAG1 is from General Electric. This circuit board is referred to as a diagnostic readout card. The 531X144DRGAAG1 is a small circuit board with very few components on it. The 531X144DRGAAG1 has two sets of Jumper Ports. The first set of Jumper Ports is labeled Cell Test one, two, three (1-3). The second set of Jumper Ports is labeled Card Test one, two, three (1-3). The 531X144DRGAAG1 has two terminal ports (male) to connect to the existing circuit board. The 531X144DRGAAG1 has ten resistors. The 531X144DRGAAG1 uses four varies sized capacitors to store energy for the 531X144DRGAAG1 to use. The 531X144DRGAAG1 store it's programming to operate in microchips (also called Integrated Circuits or chips). The 531X144DRGAAG1 has six LED (light emitting diodes) labeled LED one through six (1-6). These lights are used to perform the diagnostic readout. The 531X144DRGAAG1 has six holes to secure the circuit board into place. General Electric is a huge competitor in the industrial world. The starting companies that merged in 1892 to create what we now know as General Electric, was the Thomas Edison laboratory which was founded in 1876. The second company was the Thomas-Houston Electric Company in 1879.

To receive more information please contact AX Control by email or phone.

","meta_title":"GE DIAGNOSTIC READOUT CARD","meta_description":"GE DIAGNOSTIC READOUT CARD","keywords":"GE DIAGNOSTIC READOUT CARD","series_page_description":"GE DIAGNOSTIC READOUT CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 09:33:42","prod_pdf":[]},{"id":14168,"part_number":"531X144DRGAAGI","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DIAGNOSTIC READOUT BOARD","short_desc":null,"content":"

General Electric created a diagnostic readout circuit board. This circuit boards part number is 531X144DRGAAGI. The 531X144DRGAAGI has since been discounted by General Electric and is considered obsolete. The 531X144DRGAAGI has six light emitting diodes (LED) that are red in color. These lights are labeled one, two, four, eight, sixteen, and thirty-two across the top and LED one through six across the bottom. The 531X144DRGAAGI has multiple condensers used to create a place for electricity to be stored. The 531X144DRGAAGI uses two microchips to house the intel for the circuit board to operate. The 531X144DRGAAGI has two plastic ports with male prongs that use a wiring harness. The 531X144DRGAAGI has two six metal posts called Jumper Ports, with small caps. AX Control specializes with discounted parts. We offer warranty and repair work.

Call or email the wonderful staff at AX Control for more information.

","meta_title":"GE DIAGNOSTIC READOUT BOARD","meta_description":"GE DIAGNOSTIC READOUT BOARD","keywords":"GE DIAGNOSTIC READOUT BOARD","series_page_description":"GE DIAGNOSTIC READOUT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 10:30:57","prod_pdf":[]},{"id":14170,"part_number":"531X146BDHAAG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE AC300 BASE DRIVER","short_desc":"The 531X146BDHAAG2 is a AC 300 Base Driver","content":"

531X146BDHAAG2--AC 300 Base Driver

The 531X146BDHAAG2 is an AC-300 Base Driver board component fabricated by General Electric. This board is designed to fit into the AC-300 drive system and may be compatible with other similar general purpose GE drives. Please check your manual to determine compatibility. This is one of several AC300 Base Driver boards available.

The 531X146BDHAAG2 has a transformer component located left of center. This component has six braided wire sets exiting from its top surface. Each wire set includes a red, a white, and a blue wire. These wires connect to the board at various points around its surface. There are two separate black wires located on the board’s surface that each connects to the 531X146BDHAAG2 at two points.

The 531X146BDHAAG2 has six heat sinks, eight header connectors, and twenty-four jumper switches. The board has a single vertical pin cable connector that is located close to the center of the board. There are a number of metal film resistors on the board’s surface, along with capacitors made from ceramic and other material.

The 531X146BDHAAG2 has several slots cut into its surface. In many cases, one or more of the twenty-plus integrated circuits transverse these slots. The board has several transistors across its surface. Please refer to data sheets, manuals, or user guides for more information. Technical support for this board was originally provided by GE.

AX Control will ship the 531X146BDHAAG2 protected by an anti-static wrapping. We ship and store all static-sensitive boards in anti-static sleeves. Expedited shipping from our warehouse to your location is available.

","meta_title":"GE AC300 BASE DRIVER","meta_description":"GE AC300 BASE DRIVER","keywords":"GE AC300 BASE DRIVER","series_page_description":"GE AC300 BASE DRIVER","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-19 09:27:11","prod_pdf":[]},{"id":14171,"part_number":"531X146BDHAFG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 BASE DRIVER GE BOARD","short_desc":"The 531X146BDHAFG1 is a GE Base Driver","content":"

531X146BDHAFG1--Base Driver Card

The 531X146BDHAFG1 is a board component manufactured by General Electric for use within its general purpose drive systems. This includes drives like the DC-300 and the AC-300. Not all 531x series boards have compatibility with all systems; please consult your manual.

The 531X146BDHAFG1 functions as a Base Driver. The card is drilled in the corners and along the edges to allow for mounting. It has several slits cut into the board surface, which are typically transversed by one or more components. The board is marked with codes like 002/0, VA-4, FR00/0, 005/0, and 004/0. It also has three charts printed on its surface that give information regarding jumper settings and their effect on board function.

The 531X146BDHAFG1 has a transformer located near its center. This component wires to several terminal pins using colored (red, blue, white) wires. The board has six heat sinks, eight vertical pin header connectors, one vertical pin cable connector, over twenty-five transistors, and several resistor network arrays. It has multiple jumper switches; most jumpers are labeled as “X” or as “Y.” The board has a wide variety of resistors, diodes, and capacitors. Please consult a board data sheet for more information.

General Electric was the original resource for all technical support for this board series. If more detailed information is needed regarding maintenance, operation, or installation procedures, these may be found through publications like series user guides or individual drive manuals. Please follow all recommending handling procedures and safety precautions as stated in these documents.

","meta_title":"VA-4 BASE DRIVER GE BOARD","meta_description":"VA-4 BASE DRIVER GE BOARD","keywords":"VA-4 BASE DRIVER GE BOARD","series_page_description":"VA-4 BASE DRIVER GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-13 14:29:47","prod_pdf":[]},{"id":16967,"part_number":"531X146BDHALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BASE DRIVER MODULE PBC CIRCUIT BOARD","short_desc":null,"content":"

The 531X146BDHALG1 is a product of General Electric. The 531X146BDHALG1 has a lot of small pieces that work in unison for one purpose. The 531X146BDHALG1 is called a base driver circuit board. The 531X146BDHALG1 has been marked as an antiquated part by General Electric. The 531X146BDHALG1 is a meant for industrial purposes. The 531X146BDHALG1 has metal sticks on the circuit board to connect various wires on the circuit board. The 531X146BDHALG1 has labels for every part and are very detailed. The 531X146BDHALG1 directs energy flow using variously sized diodes. The diodes use a small mark that is a different color than the whole diode to show which way the energy flows. The 531X146BDHALG1 uses transistors. There are seven white plastic sides ports used to attach the 531X146BDHALG1 to other circuit boards. The 531X146BDHALG1 uses capacitors to stockpile electrical current. The capacitors are also called condensers in other parts of the world. The capacitors come in various colors, sizes, and shapes. The 531X146BDHALG1 can also diffuse energy using resistors. The quantity of energy that is diffused can be established by the pattern on each resistor*. The 531X146BDHALG1 has six metal fences on the circuit board.

AX Control do all we can to provide antiquated products along with excellent customer service and an unmatchable warranty.

Should you like to obtain more material or a quote on the 531X146BDHALG1 please email or call AX Control.

*Engineers can help determine what the numerical value associated with the patterns on the resistors.

**Please refer to General Electrics manuals for additional safety information.

","meta_title":"BASE DRIVER MODULE PBC CIRCUIT BOARD","meta_description":"BASE DRIVER MODULE PBC CIRCUIT BOARD","keywords":"BASE DRIVER MODULE PBC CIRCUIT BOARD","series_page_description":"BASE DRIVER MODULE PBC CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 12:22:52","prod_pdf":[]},{"id":14172,"part_number":"531X146BDHALG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"BASE DRIVER MODULE PBC CIRCUIT BOARD","short_desc":null,"content":"

General Electric created the 531X146BDHALG3 for industrial applications. The 531X146BDHALG3 is a PCB (printed circuit board) base driver circuit board. This circuit board has connection points where wires can be attached, along with a point in the center to attach a wiring harness as well as smaller white connection points along the outside edge and towards the center of the circuit board. All the wires attach into a large black box in the center of the circuit board. The wires are red, white, and blue in color. The 531X146BDHALG3 stores the functioning data in IC’s or Integrated Circuits, microchips, or chips for short. These pieces are typically made of silicon because it’s a semiconductive material. A German engineer by the name of Werner Jacobi from Siemens AG filed the first patent for an Integrated Circuit back in 1949. The 531X146BDHALG3 uses diodes as a one-way street to direct energy flow. The diodes were first founded in 1873 by a British man named Frederick Guthrie. The 531X146BDHALG3 has smaller on and off controls called Jumper Ports. These Jumper Ports use small sleeves to turn them on and off. The 531X146BDHALG3 can rid itself of unused or unneeded energy through its many resistors. If the 531X146BDHALG3 needs to store the energy it is placed inside the condensers. These condensers ideally allow no energy to escape. The manuals may also refer to condensers as condensators or capacitors. Condensers where first discovered by a man from Pomerania, Germany named Ewald Georg von Kleist back in 1745.

Contact AX Control via email or phone.

","meta_title":"BASE DRIVER MODULE PBC CIRCUIT BOARD","meta_description":"BASE DRIVER MODULE PBC CIRCUIT BOARD","keywords":"BASE DRIVER MODULE PBC CIRCUIT BOARD","series_page_description":"BASE DRIVER MODULE PBC CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 14:19:13","prod_pdf":[]},{"id":14173,"part_number":"531X149SNCABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC SNUBBER BOARD","short_desc":"The 531X149SNCABG1 is a GE Snubber Board","content":"

531X149SNCABG1--Snubber Board

The 531X149SNCABG1 is a small board component fabricated by GE for use within GE’s DC-300 drive or other similar general purpose drive systems. Many of these systems are now considered to be obsolete. However, these systems were created by GE to be dynamic and flexible, capable of handling a wide variety of industrial tasks.

The 531X149SNCABG1 is a Snubber Card that is rated 150-300 HP. Snubbers are designed to be energy-absorbing circuits that are used to suppress voltage spikes caused when a switch opens. Snubbers reduce current and voltage amplitude and limit the rate of rise of voltage and current. This board is marked with codes like VA-5, GE-Fanuc, 003/0, and FR00/1. It also has a secondary board number of F31X149SNCABG1.

The 531X149SNCABG1 has eight diodes on its surface. It has five wire wound resistors (marked HEI 9446 FS-20S-5 NI) and six capacitors. Capacitors are secondarily supported and connected to the board using zip-ties. The board also has four small metal plates with openings cut in their center mounted to the board surface, as well as having several stab-on connectors.

If more information is needed about this board component, please refer to publications from General Electric. Operation information and installation procedures can be found through series user guides, Snubber Board data sheets, or drive manuals. GE provided all original technical support for this component.

AX Control protects all static-sensitive boards during storage and during shipment with an anti-static wrap or bag. Speak to your sales representative about expedited shipping options.

","meta_title":"GENERAL ELECTRIC SNUBBER BOARD","meta_description":"GENERAL ELECTRIC SNUBBER BOARD","keywords":"GENERAL ELECTRIC SNUBBER BOARD","series_page_description":"GENERAL ELECTRIC SNUBBER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-11 09:57:27","prod_pdf":[]},{"id":14174,"part_number":"531X149SNCADG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SNUBBER BOARD 150-300HP","short_desc":null,"content":"

General Electric is a snubber circuit board with the part number 531X149SNCADG1. The 531X149SNCADG1is a petite board. The 531X149SNCADG1 has four metal rivet holes in the middle of the circuit board. The 531X149SNCADG1 uses six big silver condensers these condensers are so big they require the extra security of zip ties. The 531X149SNCADG1 has five long resistors that are black in color, these resistors have an equation written on the side. This equation is used to show how much energy the resistors disperse. The 531X149SNCADG1 has eight diodes. The diodes have an equation written on the side. The energy flows in the direction of a small silver band on one side.

Please call AX Control for a quote or more information.

* This board was discontinued by General Electric.

","meta_title":"GE SNUBBER BOARD 150-300HP","meta_description":"GE SNUBBER BOARD 150-300HP","keywords":"GE SNUBBER BOARD 150-300HP","series_page_description":"GE SNUBBER BOARD 150-300HP","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 15:30:43","prod_pdf":[]},{"id":14175,"part_number":"531X155TXMABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CIRCUIT BOARD","short_desc":null,"content":"

The 531X155TXMABG1 is a little circuit board. The 531X155TXMABG1 is a discontinued isolator transmitter card created by General Electric for industrial applications. The 531X155TXMABG1 connects with other circuit boards using two female ports each with nine openings each. Each opening has a small screw on the top of each opening. The 531X155TXMABG1 uses four sets of three pins. These pins are referred to as Jumper Ports. These Jumper Ports have small caps used to control energy flow. The 531X155TXMABG1 has thirteen resistors called axial-lead resistors. These axial-lead resistors are a passive resistor that helps diffuse electricity. The 531X155TXMABG1 uses twelve microchips to hold information that the circuit board uses to function. Uses the four small holes to secure the 531X155TXMABG1 into place.

AX Control’s staff is here to provide price quotes or additional information. You can reach AX Control by phone or email.

","meta_title":"GE CIRCUIT BOARD","meta_description":"GE CIRCUIT BOARD","keywords":"GE CIRCUIT BOARD","series_page_description":"GE CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-11-30 15:33:20","prod_pdf":[]},{"id":14176,"part_number":"531X155TXMACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE TACH ISOLATED XFMR BOARD","short_desc":"The 531X155TXMACG1 is a Tach Isolated XFMR Card","content":"

531X155TXMACG1--GE Tach Isolated XFMR Card

The 531X155TXMACG1 is a board fabricated by the General Electric Company for use within various general purpose drives, including the DC-300 and DC-500 systems. While many of these drives are now considered obsolete, they were designed by General Electric to be dynamic and flexible systems able to perform in a wide range of industrial settings.

The 531X155TXMACG1 is a Tach Isolated XFMR Card. This is a rectangular board with drill holes in each corner. The board is marked with codes 006/01 and an alternate number of F31X155TXM. The edges of the board have twelve small cutouts placed at equidistant points.

The 531X155TXMACG1 is populated with two integrated circuits. It has two stab-on connectors, one LED component that is green, and an 18-position terminal strip. Each of the screw connections on the terminal strip is individually labeled. The board has nine transistors and two TP test points that are marked CHB and CHA. It also has four jumper switches.

The 531X155TXMACG1 uses metal film resistors and ceramic capacitors. The board also carries the GE round USA logo. More information about the board, including information regarding installation procedures and handling recommendations, may be found through GE publications like data sheets, user guides, and manuals.

AX Control realizes how important time is when you are waiting on a part. Our team works with efficiency and speed to process your order. If a part is marked “In stock-ships today” it will ship the same day you place your order. Several expedited shipping options are available.

","meta_title":"GE TACH ISOLATED XFMR BOARD","meta_description":"GE TACH ISOLATED XFMR BOARD","keywords":"GE TACH ISOLATED XFMR BOARD","series_page_description":"GE TACH ISOLATED XFMR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-06 10:15:29","prod_pdf":[]},{"id":14177,"part_number":"531X156TECABG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Industrial Circuit Board","short_desc":"The 531X156TECABG1 is a GE Control Board","content":"

531X156TECABG1--Control Board

The 531X156TECABG1 is a Control Board PCB fabricated by General Electric as part of their general purpose drive systems such as the DC-300. Since there are multiple Control Boards within the 531x series, please verify this card meets your needs before placing your order.

The 531X156TECABG1 is a large board with many components. It is designed to accept up to two auxiliary boards and has eight standoffs connected to its surface. Auxiliaries screw mount into these standoffs to secure them into place. The boards communicate via cable connections.

The 531X156TECABG1 has two header connectors and six vertical pin cable connectors. These are all male connectors. Most are located toward the bottom of the board with a single cable connector placed along the top edge. The board also has several terminal pin connections.

The 531X156TECABG1 uses over thirty integrated circuits that are each typically marked with their manufacturer codes for simple identification. The board also has jumper switches, a reset switch, an inductor, and surface wiring. It uses diodes, resistor network arrays, potentiometers, capacitors, and resistors. Please review the board data sheet for more information on individual components and their use.

For detailed information on installation, operation, or maintenance, review publications from GE such as series user guides or drive manuals. GE was responsible for all original technical support for the 531X156TECABG1 and for all other boards in this series.

AX Control realizes time is essential when you are experiencing equipment failure. We will work with you to provide the necessary parts as quickly as possible. Most of our “in stock” parts will ship the same day you place your order. Talk to your sales representative for more information.

","meta_title":"Industrial Circuit Board","meta_description":"Industrial Circuit Board","keywords":"Industrial Circuit Board","series_page_description":"Industrial Circuit Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-13 08:56:47","prod_pdf":[{"id":1852,"product_id":14177,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14178,"part_number":"531X156TRCABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC CIRCUIT BOARD","short_desc":null,"content":"

The 531X156TRCABG1 is a small circuit board that was mass produced by General Electric. This circuit board has minimal parts. There is a female port with eight openings. Each opening has a flat headed screw above it. The openings are labeled one through eight. The 531X156TRCABG1 has four diodes two black and two orange. The diodes have small lines on the ends that show the direction of the energy flow. The 531X156TRCABG1 also uses a blue capacitor. Capacitors are also called condensers in certain manuals. Capacitors were first discovered by Ewald Georg von Kleist of Pomerania, Germany in October 1745. The 531X156TRCABG1 has eight multi-colored resistors. The 531X156TRCABG1 stores its programming in a single microchip. Microchips are normally made of silicon because of its semiconductive ability. The microchips early development began with a German engineer from Siemens AG named Werner Jacobi in 1949. The 531X156TRCABG1 also has two silver transistors. The beginning stages of transistors started in 1907 when the first thermionic triode which was a vacuum tube which amplified radio technology and long-distance telephony. It has since grown into what we know today.

The 531X156TRCABG1 has been discontinued by General Electric.

AX Control can assist you in obtaining out of date and difficult to find parts. For more information, the staff at AX Control can be reached via phone or email.

","meta_title":"GENERAL ELECTRIC CIRCUIT BOARD","meta_description":"GENERAL ELECTRIC CIRCUIT BOARD","keywords":"GENERAL ELECTRIC CIRCUIT BOARD","series_page_description":"GENERAL ELECTRIC CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 09:00:28","prod_pdf":[]},{"id":14179,"part_number":"531X157APCAMG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE ANALOG PROCESS BOARD","short_desc":null,"content":"

The 531X157APCAMG1 is an analog process circuit board. The 531X157APCAMG1 is a larger circuit board manufactured by General Electric. It has since been discontinued from production. The 531X157APCAMG1 uses multiple small parts to achieve its purpose. The 531X157APCAMG1 has nine Variable Resistors. These components go by a few different names such as a Variable Resistor, Rheostat, or potentiometer. These pieces control a tiny amount of energy and can be found in day to day items as well, like light dimmers or volume controls on a radio. The 531X157APCAMG1 has multiple capacitors. These capacitors range in size from tiny to huge. Capacitors may also be referred to as condensers in other manuals. The 531X157APCAMG1 can rid itself of energy through the many resistors placed around the circuit board. These resistors have markings on them that can be figured out by an engineer to determine how much energy can be dispersed. The 531X157APCAMG1 uses seven microchips to store all the information that tells the circuit board what to do and when to do it. Microchips could also be called Integrated circuits, IC’s, or chips in certain manuals. The 531X157APCAMG1 has three male terminals and four female terminals. These are used to connect with certain circuit boards. The 531X157APCAMG1 has two circular transistors. These transistors are made of a semiconductive material which is meant to help amplify any types of electrical signals or power. These transistors have three points that secure them to the circuit board.

AX Control is here via email or phone to help you with your automation needs.

","meta_title":"GE ANALOG PROCESS BOARD","meta_description":"GE ANALOG PROCESS BOARD","keywords":"GE ANALOG PROCESS BOARD","series_page_description":"GE ANALOG PROCESS BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 11:11:29","prod_pdf":[]},{"id":14180,"part_number":"531X158FFDADG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Fuse Failure Detector","short_desc":null,"content":"

The 531X158FFDADG1 is manufactured by General Electric. The 531X158FFDADG1 is a fuse failure circuit board. This circuit board is a small circuit board. The 531X158FFDADG1 has four red light emitting diodes (LED). The 531X158FFDADG1 has five diodes. Each diode is used to direct energy in a single direction. The energy flows towards the end of the diode that has a small line of a different color. The 531X158FFDADG1 uses four tiny capacitors. Each capacitor creates its own electrical field that is used to house energy the circuit board can draw from later. The 531X158FFDADG1 has one circular transistor and one small half circle transistor. The 531X158FFDADG1 has four small IC’s. The IC’s are used to store the instruction manual for the 531X158FFDADG1 to operate. The 531X158FFDADG1 has thirteen metal tabs around the outside of the circuit board. The 531X158FFDADG1 uses fourteen various sized resistors. The resistors range in size from tiny to very large. The 531X158FFDADG1 has two small green resistors and eight large resistors which have strips on them. These strips are used by engineers to determine the amount of energy these resistors can disperse. The stripped resistors are also axial-lead resistors. The 531X158FFDADG1 other resistors are large and black with the amount of energy they can disperse written on the side. To secure the circuit board into place the 531X158FFDADG1 uses four predrilled holes. The 531X158FFDADG1 is now considered a discontinued circuit board and is no longer in production.

To receive more intel about the 531X158FFDADG1 call or email the staff at AX Control.

","meta_title":"Fuse Failure Detector","meta_description":"Fuse Failure Detector","keywords":"Fuse Failure Detector","series_page_description":"Fuse Failure Detector","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 11:42:17","prod_pdf":[]},{"id":14182,"part_number":"531X159MPEAMG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MOTOR PROTECTION EQUIPMENT BOARD","short_desc":"The 531X159MPEAMG1 is a Motor Protection Equipment Board","content":"

531X159MPEAMG1--Motor Protection Equipment Board

The 531X159MPEAMG1 is a board component created by General Electric to be used within their general purpose drives, like the AC-300 or the DC-300. Not all PCBs in the 531x series is compatible with all drives; please consult your manual.

The 531X159MPEAMG1 functions as a Motor Protection Equipment Board. This board is populated by a large number of resistors, capacitors, and diodes. Resistors are usually made of metal film, but some carbon composite resistors are used on the board. Capacitors use various materials, including polyester vinyl, electrolytic material, and ceramic. The board has three resistor network arrays and ten potentiometers.

The 531X159MPEAMG1 has three transformers of three different designs on its surface. One of these transformers uses surface wiring to attach to terminal pins. There are two relays, both located on the same side of the board. There are over twenty jumper switches, two fuses, two heat sinks, several transistors, and over a dozen integrated circuits on the board’s surface.

Other components on the surface of the 531X159MPEAMG1 include a switch component, six red LED indicators, one green LED indicator, stab-on connectors, header connectors, and four terminal strips. The terminal strips are all located on the same side of the board. Refer to the board’s data sheet for more information.

Detailed installation procedures, handling instructions, or information on the board’s operation can be found through publications from General Electric like series user guides or drive manuals. GE provided all technical support for this board series. Only qualified technicians should handle or install this equipment.

","meta_title":"GE MOTOR PROTECTION EQUIPMENT BOARD","meta_description":"GE MOTOR PROTECTION EQUIPMENT BOARD","keywords":"GE MOTOR PROTECTION EQUIPMENT BOARD","series_page_description":"GE MOTOR PROTECTION EQUIPMENT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-13 14:07:59","prod_pdf":[]},{"id":14181,"part_number":"531X159MPEARG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE MOTOR PROTECTION BOARD","short_desc":"The 531X159MPEARG1 is a GE MOTOR PROTECTION BOARD","content":"

The 531X159MPEARG1 functions as a GE Motor Protection Board. It is a PCB board component manufactured by GE as a component to fit into several of GE’s general purpose drive systems.

The 531X159MPEARG1 is a rectangular shaped board with a factory-made screw hole in each corner. The board has three fuses located on the left side of the board. It has four terminal strips placed side-by-side along the bottom edge. These include one terminal strip with three positions and three terminal strips with twelve screw connections.

The 531X159MPEARG1 has eleven potentiometers. Rotary potentiometers can be used as voltage dividers. The board has several resistor network arrays, which also can be used for voltage division. The board has multiple metal film resistors as well as a few carbon composite resistors. Capacitors are made from materials like ceramic and polyester vinyl. There are fourteen integrated circuits that perform different functions for the board.

The 531X159MPEARG1 has two transformers. One of these uses surface wiring. It has two relay components. The board has multiple transistors, over twenty jumper switches, as well as six LED indicators and a single green LED indicator. The board has two heat sinks. Other components have two stab-on connectors and two header connectors. More information regarding the board, including installation location and installation procedures as well as handling recommendations, may be found through publications like GE manuals, data sheets, and series user guides.

AX Control offers a number of money-saving programs. If you would like to know more about any of these programs, click on the links located on this page.

","meta_title":"GE MOTOR PROTECTION BOARD","meta_description":"GE MOTOR PROTECTION BOARD","keywords":"GE MOTOR PROTECTION BOARD","series_page_description":"GE MOTOR PROTECTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-06 10:53:30","prod_pdf":[]},{"id":14183,"part_number":"531X161PRTABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER BOARD","short_desc":null,"content":"

The 531X161PRTABG1 is a small circuit board manufactured by General Electric. The 531X161PRTABG1 is a smaller circuit board with very few parts on it. The 531X161PRTABG1 has thirty-three small metal tabs scattered around the circuit board. Each metal tab has its own unique set of labels. The 531X161PRTABG1 has seven small black diodes. Each diode is labeled with a D and a number one through seven. The 531X161PRTABG1 has six small resistors. The 531X161PRTABG1 has two large condensers also referred to as capacitors depending on the manual you read. The 531X161PRTABG1 has one small three port female terminal with screws. The 531X161PRTABG1 has three small fuses that are used as a fail-safe that keeps the circuit board from power surges. The fuses will break if the power current is too strong. In an open space of the circuit board, it is written Threshold- JP1 1-3, 1-2, 3-4, 2-4. IDIP 20,25,30,35. Under where it says Threshold it says Time Const JP2 1-2, 2-3. TMS 0.9, 8.7. The 531X161PRTABG1 is now discontinued and is no longer manufactured by General Electric.

AX Control is available via phone or email if you would like additional information.

","meta_title":"GE POWER BOARD","meta_description":"GE POWER BOARD","keywords":"GE POWER BOARD","series_page_description":"GE POWER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 12:19:21","prod_pdf":[]},{"id":14184,"part_number":"531X166MHCAFG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Material Handling Coord Card. Call Now!","short_desc":null,"content":"

The 531X166MHCAFG1 is a material handling coord. card. The 531X166MHCAFG1 has six small blue potentiometers. These are also known as rheostats or Variable Resistors. They have a small knob on one side that is used to control about one watt of energy. The 531X166MHCAFG1 has three large capacitors also referred to as condensers that are used to store excess energy for later use in an electrical field that they produce. The 531X166MHCAFG1 has six small red LEDs or light emitting diodes. The 531X166MHCAFG1 contains its instruction manual in two microchips. These microchips are made of a semiconductive material, most of the time it is silicon. Manuals may also refer to microchips as chips, Integrated Circuits or IC for short. The 531X166MHCAFG1 uses fourteen black and silver diodes. These diodes have a small silver line on one side of the diode. The silver line is there to indicate to the engineers which way the energy is moving. The 531X166MHCAFG1 has thirty-one axial-lead resistors. These axial-lead resistors that are used to get rid of unneeded energy. The energy is turned into heat in order to get rid of it. The 531X166MHCAFG1 has six yellow squares that each have this written on top, Aromal 9108A DS2E-M-DC48V-H301, 0.5A 125VAC, 0.5A 110VDC, 2A 30V DC with General Electrics company stamp and USA stamped on the top as well. The 531X166MHCAFG1 has twenty-eight gold tabs along the opposite side of the circuit board from the Variable Resistors.

To acquire more information or a quote please email or call the staff at AX Control.

","meta_title":"Material Handling Coord Card. Call Now!","meta_description":"Material Handling Coord Card. Call Now!","keywords":"Material Handling Coord Card. Call Now!","series_page_description":"Material Handling Coord Card. Call Now!","quote_description":null,"inventory_notes":"NO BOX","cross_reference":"","created_at":null,"updated_at":"2018-12-03 12:51:31","prod_pdf":[]},{"id":16870,"part_number":"531X167MFRALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC REMOTE MFC BOARD","short_desc":null,"content":"

The 531X167MFRALG1 is a Motor Field Remote circuit board. The 531X167MFRALG1 was manufactured by General Electric and is no longer in production. The 531X167MFRALG1 is a very long circuit board. The 531X167MFRALG1 has hundreds of various pieces. The 531X167MFRALG1 uses a variety of different resistors. They are split into two groups one being the axial-lead resistors which are identified by there strips are used to disperse energy. While the second group is referred to by a few names, such as a rheostat, variable resistor, or potentiometers. These variable resistors are used to control a small amount of energy no more than a watt. The 531X167MFRALG1 has variously sized condensers also called capacitors in manuals for America. These condensers are used to create electrical fields to store energy. The 531X167MFRALG1 has eight Integrated Circuits that house the instructions and programming for the circuit board to perform properly. The 531X167MFRALG1 has multiple Jumper Ports with small caps. These caps act like an ON and OFF switch. These Jumper Ports can be moved by the engineers to control small individual circuits around the larger circuit board. The 531X167MFRALG1 has two small red colored light emitting diodes also called LEDs for short. The 531X167MFRALG1 has three thin metal prongs. The 531X167MFRALG1 has two small white male ports and one large black male port. The 531X167MFRALG1 has one transformer. The first constant-potential transformer was created in 1885. The 531X167MFRALG1 has four holes one in each corner to secure the circuit board in place.

If you would like a price quote please email or call the staff at AX Control.

","meta_title":"GENERAL ELECTRIC REMOTE MFC BOARD","meta_description":"GENERAL ELECTRIC REMOTE MFC BOARD","keywords":"GENERAL ELECTRIC REMOTE MFC BOARD","series_page_description":"GENERAL ELECTRIC REMOTE MFC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-03 15:34:52","prod_pdf":[]},{"id":14185,"part_number":"531X170TBB5AEG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC BOARD GENERAL ELECTRIC","short_desc":"","content":null,"meta_title":"PC BOARD GENERAL ELECTRIC","meta_description":"PC BOARD GENERAL ELECTRIC","keywords":"PC BOARD GENERAL ELECTRIC","series_page_description":"PC BOARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14186,"part_number":"531X170TBSAAG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC TB OPTION CARD","short_desc":null,"content":"

The 531X170TBSAAG1 is a TB Option Board. The 531X170TBSAAG1 is a long narrow circuit board. The 531X170TBSAAG1 has minimal parts. The 531X170TBSAAG1 has four male ports and a female port to connect the 531X170TBSAAG1 into the existing setup. The 531X170TBSAAG1 has two red boxes with four white switches. Both sets of switches have the same sets of markings and labels for the switches. The first button is labeled one (1) C1, the second button is labeled two (2) C2, the third button is labeled three (3) C3, the fourth button is labeled four (4) C4. The 531X170TBSAAG1 has fifty-four screw-topped female ports in one row down the circuit board each with its own label. The screws are labeled as follows. 1- XSTP, 2-PCOM, 3-CTLNI, 4-CTLN2, 5-IMET, 6-REF24, 7-SLD5, 8-VMET, 9-FCMET, 10-PCN, 11- PCP, 12-MRI, 13-PFRF, 14-DTB, 15- DTB(with a line above the letters), 16-DTA, 17-DTA (with a line above the letters), 18-PREF, 19-PRFC, 20-IMET, 21-ACOM, 22-DCOM, 23-H232, 24-T232, 25-DM5, 26-K5A, 27-RXA, 28-PSPL, 29-DTRA, 30---, 31---, 32- CTSA, 33---, 34-TXA, 35---, 36- RX8, 37-DCOM, 38-DTRD, 39 +5V, 40-RST, 41-CTB, 42- + 5v, 43-TXS, 44-DCOM, 45-24v, 48-SPRNO, 49-START, 50- FDCM, 51-STOP, 52- MAXCM, 53-MAXNO, 54-MAXNC. The 531X170TBSAAG1 also has twenty-one screw ports next to the original line. The 531X170TBSAAG1 has one circular transistor. The 531X170TBSAAG1 has one toroidal core transformer which has a yellow core and red wire wrapped around it. The 531X170TBSAAG1 also has one Jumper Port.

If you would like a quote please reach out to AX Control via email or phone.

","meta_title":"GENERAL ELECTRIC TB OPTION CARD","meta_description":"GENERAL ELECTRIC TB OPTION CARD","keywords":"GENERAL ELECTRIC TB OPTION CARD","series_page_description":"GENERAL ELECTRIC TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 09:31:53","prod_pdf":[]},{"id":14187,"part_number":"531X170TBSABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC OPTION BOARD","short_desc":"The 531X170TBSABG1 is a GE TB OPTION BOARD","content":"

The 531X170TBSABG1 is a GE printed circuit board component. This board component is not designed as a specific drive component but rather is designed for use in a number of general purpose drive systems manufactured by GE. Compatibility with your drive can be determined by checking your manufacturer-provided user guides and manuals.

The 531X170TBSABG1 functions as a TB Option Card. This is a long and narrow board. It measures 2.75 inches by 11 inches, and is factory drilled in several places, including in each corner, once near the center of the board, and twice along one long edge. The center of the board is populated by a long terminal strip and another, shorter, terminal strip. The first of these components has fifty-four screw connections. The second terminal strip has twenty-one screw connections. Each of these connections is individually numbered and labeled on the board surface.

The 531X170TBSABG1 has several other board components. This includes a rectifier diode, a single jumper switch, a stab-on connector, an inductor coil, and one polyester vinyl capacitor (200V 10+/- 10% 104x122AA208.) The board has three header connectors. One is a twenty-four pin connector, one a sixteen-pin connector, and the final one is a nine-pin connector. It has one vertical pin male cable connector and one female DC-37 connector. The board has two switch components with four toggles per switch. The toggles can be set to “DCE” or to “DTF.” The last board component is a DS2E-M-DC24V relay. This relay is suitable for use in difficult environments and can be used with automatic solder and automatic wash systems. It has gold-clad twin contacts that ensure high reliability and polarized magnetic circuits.

","meta_title":"GENERAL ELECTRIC OPTION BOARD","meta_description":"GENERAL ELECTRIC OPTION BOARD","keywords":"GENERAL ELECTRIC OPTION BOARD","series_page_description":"GENERAL ELECTRIC OPTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 09:47:58","prod_pdf":[]},{"id":14188,"part_number":"531X170TBSACG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VA-4 TERMINAL BOARD","short_desc":"The 531X170TBSACG1 is a TB Option Card","content":"

The 531X170TBSACG1 is a TB Option Card manufactured by General Electric. This PCB is not designed to be a component for a particular drive system; rather it is used in various general purpose drive systems created by GE, including the DC-300 drive. Check your user guide to determine compatibility.

The 531X170TBSACG1 is a narrow, long rectangular board. It measures 11 by 2.75 inches and is marked with codes like F31X170TBSACG1, 004/0, and FR00/0. The board has factory-made holes to allow for mounting options. This includes a mounting hole in each corner, one in the center of the board, and two on a long board edge. The board has two terminal strips, including one that has fifty-four screw connections and one with twenty-one screw connections. These connections are all numbered and labeled on the board surface.

The 531X170TBSACG1 is populated by several other components. This includes three header connectors (one 9-pin, one 16-pin, and one 24-pin,) one male pin cable connector and one female cable connector. The board has a single stab-on connector, a polyester-vinyl capacitor, a single jumper switch, and one silicon bridge rectifier diode. The board has an inductor coil, a relay, and two switch components. The relay is a DS2E-M-DC24V 2 Form C relay with a nominal operating power of 400 mW. Each of the switch components has four toggle switches that can be set to “DCE” or “DTE.” If more information is needed on board operation, on specific components, or on installation procedures or maintenance schedules, please refer to user guides or manuals from General Electric.

","meta_title":"GE VA-4 TERMINAL BOARD","meta_description":"GE VA-4 TERMINAL BOARD","keywords":"GE VA-4 TERMINAL BOARD","series_page_description":"GE VA-4 TERMINAL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 09:49:09","prod_pdf":[]},{"id":14190,"part_number":"531X170TBSADG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Terminal Board Card","short_desc":"The 531X170TBSADG1 is a TB Option Card","content":"

The 531X170TBSADG1 is a board component manufactured by GE to be used for general purpose drive systems from GE. One of these systems is a DC-300 drive. Your user guide or manual should help you determine if the PCB is compatible with your drive system.

The 531X170TBSADG1 functions as a TB Option Card. The board has dimensions of 2.75 inches by 11 inches. It is designed with factory-made drill holes designed to allow for mounting options. One mounting hole is located in each corner. Another is placed in the center of the board, and two are located on a board edge.

The 531X170TBSADG1 has two terminal strips. One strip has fifty-four screw positions and the other has twenty-one screw positions. Other components placed on the board include five connectors (three header connectors, a male vertical pin cable connector, and a female 37-pin DC connector,) an inductor coil, a relay, two switch components, a stab-on connector, a polyester vinyl capacitor, a jumper switch, and a diode. The switch components each have four toggles. The relay component is marked “DS2E-M-DC24V.” This is a 2 Form C relay. It has epoxy resin seals and is suitable for use in difficult environments. It has gold-clad twin contacts that are highly stable and ensure stable contact resistance over time. If more information is needed, please refer to GE manuals or data sheets that reference this part number.

AX Control takes pride in carefully packaging every order that leaves our facility. That includes the use of anti-static wrapping for all static-sensitive boards.

","meta_title":"Terminal Board Card","meta_description":"Terminal Board Card","keywords":"Terminal Board Card","series_page_description":"Terminal Board Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 09:50:02","prod_pdf":[]},{"id":14191,"part_number":"531X170TBSADS1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC TB OPTION BOARD","short_desc":"The 531X170TBSADS1 is a GENERAL ELECTRIC TB OPTION BOARD","content":"

The 531X170TBSADS1 is a long and narrow PCB component manufactured by General Electric for use within GE general purpose drive systems like the DC-300 drive. Please refer to your own user guide or manual to determine if this PCB is compatible with your system. Our team will also be happy to help you determine compatibility.

The 531X170TBSADS1 is a TB Option Card. There are many versions of this card within the 531x series. The 531X170TBSADS1 has dimensions of 11 inches by 2.75 inches. The board has drill holes in each corner to allow for mounting. The board has several other drill holes for stabilization. It is marked with codes like F31X170TBSADG1, 002/0, 005/0, 004/0, FR00/0, and VA-5.

The 531X170TBSADS1 is populated with a silicon bridge rectifier, a jumper switch, an inductor coil, a single stab-on connector, and a relay. The relay is a 2 Form C relay that is marked DS2E-M-DC24V. It is suitable for use in difficult environments due to its epoxy resin seals. It also has three header connectors (a nine-pin connector, a sixteen-pin connector, and a twenty-four pin connector,) and a vertical pin connector (male) as well as a DC-37 female connector.

The last components on the board are two switch components and two terminal strips. The switch components each have four toggles each that can be set to DCE or to DTE. The terminal strips have a total of 75 screw connections, fifty-four on one and twenty-one on another. Each screw connection is numbered and labeled.

","meta_title":"GENERAL ELECTRIC TB OPTION BOARD","meta_description":"GENERAL ELECTRIC TB OPTION BOARD","keywords":"GENERAL ELECTRIC TB OPTION BOARD","series_page_description":"GENERAL ELECTRIC TB OPTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 10:08:42","prod_pdf":[]},{"id":14192,"part_number":"531X170TBSAEG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE TERMINAL BOARD","short_desc":"The 531X170TBSAEG1 is a GE Terminal Option Board","content":"

The 531X170TBSAEG1 is a PCB component produced by General Electric for use with and by GE general purpose drive systems like the DC-300 drive. Please refer to your user guide or manual to help you determine compatibility with the 531x series. Our team can also help you check for compatibility.

The 531X170TBSAEG1 is a TB Option Board. The 531x series has multiple versions of this board. The TB Option Board is a long, narrow board with dimensions of 2.75 inches by 11 inches. It has mounting holes located in each corner, as well as additional factory-made holes located elsewhere on the board surface. The 531X170TBSAEG1 is marked with codes like FR00/0, F31X170TBSADG1, 3589, and 004/0.

The 531X170TBSAEG1 has components like a 2 Form C relay marked DS2E-M-DC24V. This relay has gold-clad contacts that provide stable contact resistance over time. The board has a stab-on connector, three header connectors, and two vertical-pin connectors (one male and one female.) It has a polyester vinyl capacitor, an inductor coil, two switch components, a single jumper switch, and a silicon bridge rectifier diode. Each of the switch components has four toggles located on its surface. These toggles can be set either to DCE or to DTE.

The final components on the 531X170TBSAEG1 surface are two terminal strips. One of these has 54 screw connections, while the other has 21 screw connections. Each connection is individually numbered and labeled. More information on the board’s use, its installation, handling, and function, may be found through publications from the manufacturer such as user guides and manuals.

","meta_title":"GE TERMINAL BOARD","meta_description":"GE TERMINAL BOARD","keywords":"GE TERMINAL BOARD","series_page_description":"GE TERMINAL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 10:51:30","prod_pdf":[]},{"id":14193,"part_number":"531X170TBSAFG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"TB OPTION CARD","short_desc":"The 531X170TBSAFG1 is a TB OPTION CARD","content":"

The 531X170TBSAFG1 is a board component manufactured by General Electric. This board was not created for use for any specific system; rather, it is a general purpose board designed for use in various drives from General Electric. Please refer to your drive’s manual or user guide to check for compatibility.

The 531X170TBSAFG1 functions as a TB Option Terminal Board. The board is long and narrow, measuring 11 inches by 2.75 inches. It is factory drilled at each corner to allow for mounting. The board has additional mounting holes drilled along edges and within the body of the board to allow for further stabilization.

The primary components on the 531X170TBSAFG1 are two terminal strips. One of these strips runs the length of the board. The other runs a third of the way down the centerline of the board. The first strip has 54 screw connections. Each is numbered and labeled on the surface of the board. The second terminal strip has 21 screw connections, of which the first eighteen are numbered and labeled on the board surface.

Other components located on the 531X170TBSAFG1 include two cable connectors. Both of these connectors are vertical connectors. One is male and one female. The board also has three header connectors, including a 24-pin connector, a 9-pin connector, and a 16-pin connector. It has a single inductor, a single relay, one polyester vinyl capacitor, one jumper switch, one rectifier diode, and one stab-on connector. There is also one metal film resistor located on the bottom surface of the board. In the top right corner, the board is populated by two switch components. Each switch has four toggles that can be independently manipulated.

The 531X170TBSAFG1 is marked with codes like 002/0, FR00/0, 003/0, and VA-5. It is marked with the board number and the code F31X170TBSADG1. If more information is needed, please refer to GE user guides or manuals.

","meta_title":"TB OPTION CARD","meta_description":"TB OPTION CARD","keywords":"TB OPTION CARD","series_page_description":"TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 09:51:26","prod_pdf":[]},{"id":14194,"part_number":"531X170TBSAGG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE TB OPTION CARD","short_desc":"The 531X170TBSAGG1 is a TB Option Card","content":"

The 531X170TBSAGG1 is a TB Option Card manufactured by GE for use within several general purpose drive systems. This includes the DC-300 drive. Your system’s manual or user guide will help you determine compatibility with the 531x series of boards.

The 531X170TBSAGG1 have two terminal strips populating the center of the board. These are built with 21 screw connections on one terminal strip and with 54 screw connections on the other terminal strip. Each connection is individually numbered and labeled. This includes labels such as Xstp, Pcom, Ctln1, Ctln2, Imet, Ref24, Sld5, Vmet, Fcmet, Pcn, Pcp, Mri, Pfrf, and Dtb on the larger terminal strip and Ref24, Jog, Run, Mup3, Mup2, Mup1, CLA, and Jogr on the second terminal strip.

Other components on the 531X170TBSAGG1 include a silicon bridge rectifier diode, a jumper switch, a relay, an inductor coil, and two switch components. There are four toggles located on the top plane of each of these switch components. These toggles can be set to DTE or to DCE. The board has a single capacitor made of polyester vinyl material.

Connectors located on the 531X170TBSAGG1 are several. This includes a stab-on connector, a DC-37 female connector, a vertical pin male cable connector, and three header connectors that include a 24-pin, a 16-pin, and a 9-pin connector.

The 531X170TBSAGG1 is drilled in several locations, including in each corner and within the body of the board. It is marked with the board ID number, the manufacturer logo, and with codes like F31X170TBSADG1, FR00/0, 003/0, and 004/0. User guides and manuals from the manufacturer will provide more information regarding function, installation, and components.

","meta_title":"GE TB OPTION CARD","meta_description":"GE TB OPTION CARD","keywords":"GE TB OPTION CARD","series_page_description":"GE TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 11:25:03","prod_pdf":[]},{"id":14195,"part_number":"531X171TMAABG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Micro Application Card","short_desc":"GE Terminal Board Relay Card 531X171TMAABG1","content":"

The GE Terminal Board Relay Card 531X171TMAABG1 contains interface circuitry and the connection terminals for most signal I/O. The board connects to the drive control board through cables. The GE Terminal Board Relay Card 531X171TMAABG1 features an RS232C serial port connection that you can use to connect the board to a laptop computer, or other device.

To use the connection you must make sure that each port on the laptop is assigned a unique address. To configure the serial ports, access the setup configuration utility and assign addresses and make sure the ports are not disabled. You might also make sure the devices are compatible. You might also make sure the serial connector is connected to the right connector on the laptop. The serial connection can be used as an interface to the configuration tools and diagnostic tools for the drive.

The board contains jumpers and DIP switches that enable the installer to configure the board for use in the drive. Before you install the replacement board, carefully locate the jumpers and DIP switches on the defective board and set the jumpers and DIP switches on the replacement to match the defective board. You might find that the location of the jumpers and switches has been updated on the new board. Even though the location might have changed, find the jumper identifier on the new board and set the jumper in the identical position.

The information supplied with the board provides a description of the jumpers and switches.

","meta_title":"Micro Application Card","meta_description":"Micro Application Card","keywords":"Micro Application Card","series_page_description":"Micro Application Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14196,"part_number":"531X171TMAABG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MICRO APPL TB CARD GENERAL ELECTRIC","short_desc":"GE Terminal Board Relay Card 531X171TMAABG2","content":"

The GE Terminal Board Relay Card 531X171TMAABG2 contains interface circuitry and the connection terminals for most signal I/O. The board connects to the drive control board through cables. The GE Terminal Board Relay Card 531X171TMAABG2 contains a terminal block that requires your consideration before you attempt to connect wires to it. The terminal block is used to secure individual wires used to send and receive control signals. Each wire is secured to the terminal block with a small screw.

To attach a wire to the terminal block, loosen the screw with a screwdriver but do not remove the screw. Insert the wire into the terminal and make sure it is completely engaged in the connector. Use the screwdriver to tighten the screw and secure the wire in the terminal block. Tug on the wire to test the connection.

The GE Terminal Board Relay Card 531X171TMAABG2 is secured inside the drive cabinet with four screws. First, remove all power to the drive and wait a few seconds for all power to drain from the board. Some components of the board hold voltage for a few seconds after power is removed so to avoid personal injury, it is important to allow time for all power to drain off.

Loosen the four screws to remove the defective board. However, make sure the screwdriver does not touch any components inside the drive. Before you remove any cables attached to the board, note where they are connected and label each cable with the identifier of the connector.

","meta_title":"MICRO APPL TB CARD GENERAL ELECTRIC","meta_description":"MICRO APPL TB CARD GENERAL ELECTRIC","keywords":"MICRO APPL TB CARD GENERAL ELECTRIC","series_page_description":"MICRO APPL TB CARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14197,"part_number":"531X171TMAADG2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BOARD","short_desc":"GE Terminal Board Relay Card 531X171TMAADG2","content":"

The GE Terminal Board Relay Card 531X171TMAADG2 contains interface circuitry and the connection terminals for most signal I/O. The board connects to the drive control board through cables. The GE Terminal Board Relay Card 531X171TMAADG2 is a replacement board and is installed in a drive. The drive is a high-voltage device and maintaining any components in the drive subjects the installer or servicer to the risk of electric shock, electric burns, and injury from the moving parts of the drive. To avoid the risk or shock, burns, or other injury, the servicer should be fully qualified.

The servicer must understand the risks involved with working with high-voltage electricity. The servicer must know to inspect the general area around the drive before starting and where the emergency shut-off devices are for the power supplied to the drive. And the servicer must know how to operate the shut-offs. It is best practice to use a buddy system to replace the board. That is, the servicer must have an assistant or other individual in the area who can provide assistance if needed or if an emergency occurs.

Before starting any procedure all power to the drive must be removed and the servicer must use a tester to verify that power is disconnected. Use an approved tester that is calibrated and configured for the purpose. The servicer must be familiar with all points in the driver from which to test for power. If power still resides in the drive, do not continue until it is removed.

","meta_title":"GENERAL ELECTRIC BOARD","meta_description":"GENERAL ELECTRIC BOARD","keywords":"GENERAL ELECTRIC BOARD","series_page_description":"GENERAL ELECTRIC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14198,"part_number":"531X171TMAAEG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":12,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MICRO APPL TB CARD","short_desc":"GE Terminal Board Relay Card 531X171TMAAEG2","content":"

The GE Terminal Board Relay Card 531X171TMAAEG2 contains interface circuitry and the connection terminals for most signal I/O. The board connects to the drive control board through cables.

The GE Terminal Board Relay Card 531X171TMAAEG2 features several connectors for cables that connect the board to components in the drive. Before you start the replacement, inspect the defective board and note all wires and cables connected to it. The board features a terminal on which multiple single wires are connected that provide for electrical signals that are sent to other components in the drive. It also provides for signals that are sent to the board for processing. Create labels that provide information concerning where the wires are connected on the terminal. This will avoid the possibility of wiring the replacement board incorrectly which would lead to further down time for the drive.

To remove the wires from the terminal, create the label and apply it to the wire. Each terminal has a separate connector that is held in place with a screw. Use a screwdriver to loosen the screw that holds the wire in place. Remove the wire from the terminal and move it to one side while the new board is installed in the drive. To install the wire in the new board, use a screwdriver to loosen the screw and insert the wire in the connector. Make sure the bare metal is in the connector. Tighten the connector with the screwdriver.

","meta_title":"MICRO APPL TB CARD","meta_description":"MICRO APPL TB CARD","keywords":"MICRO APPL TB CARD","series_page_description":"MICRO APPL TB CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14199,"part_number":"531X171TMAAFG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MICRO APPL TB CARD GENERAL ELECTRIC","short_desc":"GE Terminal Board Relay Card 531X171TMAAFG2","content":"

The GE Terminal Board Relay Card 531X171TMAAFG2 contains interface circuitry and the connection terminals for most signal I/O. The board connects to the drive control board through cables. The GE Terminal Board Relay Card 531X171TMAAFG2 contains a terminal for connecting many signal wires to the board. The board is a replacement for several boards and functions identically to the original boards. However, you might find that some of the terminals do not have an exact match between the defective board and the replacement board.

When you receive the board it is shipped in a container that is sealed with a security tape over the box lid. Open the lid of the box and gather all the documentation that came with the board. This includes warranty information, service information, and a user manual. The user manual contains instructions for wiring the board correctly between the defective board and the new board. For example, if a wire is attached to terminal 24 on the defective board, the connector is ACOM on the old board and AN1 on the replacement board. Simply move the wire from 4TB to the 3TB assembly on the replacement board.

When you open the box notice that the board is wrapped in a static protective bag. Leave the board wrapped so that static electricity cannot build up on the board. If you have a need to pick up the board, hold it by the edges. That is, do not hold the board by pressing on the components on the board or the solder points. The components might break off the board or might be damaged under the pressure of your hands.

","meta_title":"MICRO APPL TB CARD GENERAL ELECTRIC","meta_description":"MICRO APPL TB CARD GENERAL ELECTRIC","keywords":"MICRO APPL TB CARD GENERAL ELECTRIC","series_page_description":"MICRO APPL TB CARD GENERAL ELECTRIC","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1851,"product_id":14199,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14200,"part_number":"531X174RCCADG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"General Electric Ribbon Connector Board. Call Now!","short_desc":null,"content":"

The 531X174RCCADG1 is a Ribbon Connector Board by General Electric. This circuit board is super small and only has one small male connector has forty-two metal prongs. The 531X174RCCADG1 has a white plastic clip to attach the ribbon connector securely to the circuit board. The 531X174RCCADG1 has thirty-two gold lines on the bottom edge of the circuit board.

Please call or email the knowledgeable staff at AX Control for more information.

","meta_title":"General Electric Ribbon Connector Board. Call Now!","meta_description":"General Electric Ribbon Connector Board. Call Now!","keywords":"General Electric Ribbon Connector Board. Call Now!","series_page_description":"General Electric Ribbon Connector Board. Call Now!","quote_description":null,"inventory_notes":"NO BOX","cross_reference":"","created_at":null,"updated_at":"2018-12-04 10:02:55","prod_pdf":[]},{"id":14201,"part_number":"531X175SSBAAM3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":2,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Dual Channel BIU Series Six","short_desc":null,"content":"

The 531X175SSBAAM3 is a Dual Channel BIU Interface circuit board, produced by General Electric. The 531X175SSBAAM3 forty-seven chips that vary in size from tiny to very large. These chips a typically made of silicon or another conductive material. The chips are their own enclosed circuit board that is used to house the instructions for the 531X175SSBAAM3 as a whole. The chips are also referred to as microchips or Integrated Circuits (IC) in manuals. The 531X175SSBAAM3 has components that store energy for the circuit board to use in electrical fields. These components go by a few names depending on where you are in the world. The original names for these components are condensers or condensators. In English, the name was changed to capacitors. The condensers are different sizes from small to medium and long bars. The 531X175SSBAAM3 can also get rid of energy it doesn’t need by using resistors. To determine the amount of energy they are capable of getting rid of consult your engineer to decode the markings on each resistor. The 531X175SSBAAM3 has two red LEDs (light emitting diodes) on the top edge of the circuit board. Next to these LEDs is a red toggle switch. The 531X175SSBAAM3 has multiple smaller circuits on the face of the circuit board. These smaller circuits are controlled by moving the caps to the Jumper Ports around the face of the circuit board. The 531X175SSBAAM3 has a male terminal at the bottom edge of the circuit board to connect it with the system.

Call or email AX Control for more information.

","meta_title":"Dual Channel BIU Series Six","meta_description":"Dual Channel BIU Series Six","keywords":"Dual Channel BIU Series Six","series_page_description":"Dual Channel BIU Series Six","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 10:30:06","prod_pdf":[{"id":1850,"product_id":14201,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14202,"part_number":"531X175SSBABM1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 PC Board","short_desc":null,"content":"

General Electric is the manufacture of a VA-4 Dual Channel BIU circuit board with the part number 531X175SSBABM1. The 531X175SSBABM1 has a crystal oscillator in the center of the circuit board. The crystal oscillator uses a crystal to create a precise frequency. Crystal oscillators are also found in the clocks and watches you look at on a daily basis. The 531X175SSBABM1 uses Jumper Ports to control the smaller circuits on the surface of the circuit board. The 531X175SSBABM1 has a toggle switch on the upper edge of the circuit board. Next to this toggle switch is two red light emitting diodes (LEDs). The 531X175SSBABM1 has thirty-six gold metal strips on the upper edge of the circuit board. Along the bottom is a multi-pronged metal male terminal used for connection purposes. The 531X175SSBABM1 has to components that seem to be the polar opposite. One disperses energy while the other stores' energy. The component that disperses energy is known as a resistor. The resistor converts energy into heat in order to get rid of it. The component that stores the energy is known by one of three names condensers, capacitors, or condensators. The 531X175SSBABM1 stores the data to help it operate split between thirty-six Integrated Circuits. When looking in a manual the Integrated Circuits may also be identified as IC’s, chips or microchips. The 531X175SSBABM1 has two red boxes with a white switch on the top. The 531X175SSBABM1 has no longer in production by General Electric.

Should you like more information please call or email AX Control.

","meta_title":"VA-4 PC Board","meta_description":"VA-4 PC Board","keywords":"VA-4 PC Board","series_page_description":"VA-4 PC Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 11:07:39","prod_pdf":[{"id":1849,"product_id":14202,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14203,"part_number":"531X175SSBAEM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 PRINTED CIRCUIT GE BOARD","short_desc":null,"content":"

The 531X175SSBAEM1 is manufactured by General Electric. The 531X175SSBAEM1 is a Dual Channel BIU circuit board. The 531X175SSBAEM1 has a connection point at the base of the circuit board referred to as a male terminal. Next to the male terminal is an arrow. Underneath the arrow, it says Solder direction. The 531X175SSBAEM1 has two small red boxes with a small white button switch on the top. The 531X175SSBAEM1 has one small black half circle transistor. The 531X175SSBAEM1 has multiple capacitors to create energy fields that house energy for the circuit board. Capacitors are also called condensators or condensers in other languages. The 531X175SSBAEM1 rids itself of energy using resistors. These resistors have markings on the side that allows the engineer to figure out how much energy each resister can get rid of. The 531X175SSBAEM1 has a small silver crystal oscillator. The crystal oscillator creates precise frequencies using vibrations created by a crystal. The 531X175SSBAEM1 has a small toggle switch and two light emitting diodes. The 531X175SSBAEM1 has thirty-eight microchips that collectively share the instruction to tell the 531X175SSBAEM1 how to operate. Manuals may refer to the microchips as chips or Integrated Circuits (IC) as well. Microchips are found in virtually every type of electronics like home appliances, computers, and cell phones. The 531X175SSBAEM1 has multiple metal pins across the circuit board with caps. These pins are called Jumper Ports and are used by engineers to control small individual circuits using the caps like an ON and OFF switch.

For a quote call or email AX Control’s staff.

","meta_title":"VA-4 PRINTED CIRCUIT GE BOARD","meta_description":"VA-4 PRINTED CIRCUIT GE BOARD","keywords":"VA-4 PRINTED CIRCUIT GE BOARD","series_page_description":"VA-4 PRINTED CIRCUIT GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 11:55:01","prod_pdf":[]},{"id":14204,"part_number":"531X175SSBAFM1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Series Six BIU Dual Channel","short_desc":null,"content":"

The 531X175SSBAFM1 is a large circuit board produced by General Electric. The 531X175SSBAFM1 has all of its control data located amongst its thirty-six Integrated Circuits. These enclosed circuits are also referred to as ICs, chips or microchips in operation manuals. The 531X175SSBAFM1 uses small prongs known as Jumper Ports to control smaller energy circuits around the circuit board. The Jumper Ports are controllable using small sleeves that slide over the prongs. These sleeves can open or close of the energy circuits based on how the engineer wants the 531X175SSBAFM1 to function. The 531X175SSBAFM1 uses a few diodes to control energy flow. The diodes have a small line or mark at one end. This mark is used to show the engineer which way the current is flowing. In order to store energy to use later, the 531X175SSBAFM1 uses condensers (also called capacitors in manuals). The condensers on this circuit board range from strips to small in size. The 531X175SSBAFM1 is also capable of expelling energy it doesn’t need. The energy is turned into heat and expelled through the resistors across the circuit board. The 531X175SSBAFM1 has two red light emitting diodes (LEDs), two small red boxes with a white toggle switch on the top. The 531X175SSBAFM1 also has a red box with a metal toggle switch. The 531X175SSBAFM1 uses a crystal oscillator to create a precise frequency. The 531X175SSBAFM1 has thirty-six metal strips along the top edge of the circuit board.

AX Control’s knowledgeable staff is here to answer any questions you may have via phone or email.

","meta_title":"Series Six BIU Dual Channel","meta_description":"Series Six BIU Dual Channel","keywords":"Series Six BIU Dual Channel","series_page_description":"Series Six BIU Dual Channel","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 13:44:48","prod_pdf":[{"id":1847,"product_id":14204,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14205,"part_number":"531X175SSBAHM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DUAL CHANNEL SERIES SIX INTERFACE BOARD","short_desc":null,"content":"

The 531X175SSBAHM is a circuit board produced by General Electric. The 531X175SSBAHM uses Jumper Ports to control energy flow around the circuit board. The 531X175SSBAHM uses resistors to disperse unneeded energy. These resistors are easily identifiable by the small stripped marking on the sides. These markings are used by engineers to create an equation to determine the amount of energy each resistor can disperse. The 531X175SSBAHM uses multiple diodes to direct energy flow. Diodes allow the energy to flow in a single direction. The energy flows in the direction of a small line on one end of the diode. The 531X175SSBAHM stores' energy in devices that create an electrical field. These devices are known as condensers, capacitors, or condensators. The 531X175SSBAHM has thirty-eight chips also referred to as Integrated Circuits (IC) or microchips. These components are made of semi-conductive material to hold programming for the circuit board to function. To attach into your current system the 531X175SSBAHM has a male terminal port. To secure the 531X175SSBAHM into place there are four holes to use to screw the circuit board into place. The 531X175SSBAHM also has an arrow pointing in the direction the circuit board needs to be inserted with Solder Direction written underneath. The 531X175SSBAHM has a component that you can find in everyday things like your wristwatch or clock. This component is called a crystal oscillator. This is used to make a high and accurate frequency. The 531X175SSBAHM from General Electric is no longer in production and has been dubbed an obsolete circuit board.

Email of call AX Control for more details.

","meta_title":"GE DUAL CHANNEL SERIES SIX INTERFACE BOARD","meta_description":"GE DUAL CHANNEL SERIES SIX INTERFACE BOARD","keywords":"GE DUAL CHANNEL SERIES SIX INTERFACE BOARD","series_page_description":"GE DUAL CHANNEL SERIES SIX INTERFACE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:03:36","prod_pdf":[]},{"id":14206,"part_number":"531X175SSBASM2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Dual Channel BIU Module","short_desc":null,"content":"

The 531X175SSBASM2 is a Dual Channel BIU Interface circuit board, produced by General Electric. The 531X175SSBASM2 has components that store energy for the circuit board to use in electrical fields. These components go by a few names depending on where you are in the world. The original names for these components are condensers or condensators. In English, the name was changed to capacitors. The condensers are different sizes from small to medium and long bars. The 531X175SSBASM2 can get rid of energy it doesn’t need by using resistors. To determine the amount of energy they are capable of getting rid of consulting with your engineer will assist you in decoding the markings on each resistor. The 531X175SSBASM2 has two red LEDs (light emitting diodes) on the top edge of the circuit board. Next to these LEDs is a red toggle switch. The 531X175SSBASM2 has multiple smaller circuits on the face of the circuit board. These smaller circuits are controlled by moving the caps to the Jumper Ports around the face of the circuit board. The 531X175SSBASM2 has a male terminal at the bottom edge of the circuit board to connect it with the system. The 531X175SSBASM2 forty-seven chips that vary in size from tiny to very large. These chips a typically made of silicon or another conductive material. The chips are their own enclosed circuit board that is used to house the instructions for the 531X175SSBASM2 as a whole. The chips are also referred to as microchips or Integrated Circuits (IC) in manuals.

Call or email AX Control for more information.

","meta_title":"Dual Channel BIU Module","meta_description":"Dual Channel BIU Module","keywords":"Dual Channel BIU Module","series_page_description":"Dual Channel BIU Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:28:21","prod_pdf":[{"id":1848,"product_id":14206,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14207,"part_number":"531X175SSBAWM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Series 6 Six Interface BIU Card","short_desc":null,"content":"

The 531X175SSBAWM2 is factory-made by General Electric. The 531X175SSBAWM2 is a Dual Channel BIU circuit board. The 531X175SSBAWM2 has thirty-eight microchips that collectively share the instruction to tell the 531X175SSBAWM2 how to operate. Manuals may refer to the microchips as chips or Integrated Circuits (IC) as well. Microchips are found in virtually every type of electronics like home appliances, computers, and cell phones. The 531X175SSBAWM2 has two small red boxes with a small white button switch on the top. The 531X175SSBAWM2 has multiple capacitors to create energy fields that house energy for the circuit board. Capacitors are also called condensators or condensers in other languages. The 531X175SSBAWM2 rids itself of energy using resistors. These resistors have markings on the side that allows the engineer to figure out how much energy each resister can get rid of. The 531X175SSBAWM2 has a small silver crystal oscillator. The crystal oscillator creates precise frequencies using vibrations created by a crystal. The 531X175SSBAWM2 has a small toggle switch and two light emitting diodes. The 531X175SSBAWM2 has one small black half circle transistor. The 531X175SSBAWM2 has multiple metal pins across the circuit board with caps. These pins are called Jumper Ports and are used by engineers to control small individual circuits using the caps like an ON and OFF switch. The 531X175SSBAWM2 has an assembly point at the base of the circuit board referred to as a masculine terminal. Next to the masculine terminal is an arrow. Underneath the arrow, it says Solder direction.

For a quote call or email AX Control’s staff.

","meta_title":"GE Series 6 Six Interface BIU Card","meta_description":"GE Series 6 Six Interface BIU Card","keywords":"GE Series 6 Six Interface BIU Card","series_page_description":"GE Series 6 Six Interface BIU Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:33:04","prod_pdf":[{"id":1846,"product_id":14207,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14208,"part_number":"531X175SSBAYM2","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC BOARD","short_desc":null,"content":"

General Electric is the manufacture of a VA-4 Dual Channel BIU circuit board with the part number 531X175SSBAYM2. The 531X175SSBAYM2 uses Jumper Ports to control the smaller circuits on the surface of the circuit board. The 531X175SSBAYM2 stores the data to help it operate split between thirty-six Integrated Circuits. When looking in a manual the Integrated Circuits may also be identified as IC’s, chips or microchips. The 531X175SSBAYM2 has a toggle switch on the upper edge of the circuit board. Next to this toggle switch is two red light emitting diodes (LEDs). The 531X175SSBAYM2 has thirty-six gold metal strips on the upper edge of the circuit board. Along the bottom is a multi-pronged metal male terminal used for connection purposes. The 531X175SSBAYM2 has to components that seem to be the polar opposite. One disperses energy while the other stores' energy. The component that disperses energy is known as a resistor. The resistor converts energy into heat in order to get rid of it. The component that stores the energy is known by one of three names condensers, capacitors, or condensators. The 531X175SSBAYM2 has a crystal oscillator in the center of the circuit board. The crystal oscillator uses a crystal to create a precise frequency. Crystal oscillators are also found in the clocks and watches you look at on a daily basis. The 531X175SSBAYM2 has two red boxes with a white switch on the top. The 531X175SSBAYM2 has no longer in production by General Electric.

Should you like more information please call or email AX Control’s staff today.

","meta_title":"GENERAL ELECTRIC BOARD","meta_description":"GENERAL ELECTRIC BOARD","keywords":"GENERAL ELECTRIC BOARD","series_page_description":"GENERAL ELECTRIC BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-04 16:39:26","prod_pdf":[]},{"id":14209,"part_number":"531X179PLKAJG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Drive Application Card","short_desc":"The 531X179PLKAJG1 is a Drive Application Card","content":"

531X179PLKAJG1--Drive Application Card

The 531X179PLKAJG1 is a board component fabricated by the General Electric company as part of their general purpose drive systems. This includes the DC-300 and other comparable drives. Originally designed to be flexible and dynamic systems capable of use in a number of industrial settings, these drives are generally considered obsolete today. However, some original design features remain timely.

The 531X179PLKAJG1 is a Drive Application Card. This board carries codes like GE-Fanuc, VA-5, and 006/02. Some codes are printed on the rear surface of the board.

The 531X179PLKAJG1 has three relays. There is a single transformer component located next to the board’s only fuse. The card has two switches; each of these has five toggles placed on its top surface that can be individually set. There is a line of LED (light emitting diode) indicators placed near the center of the board, including seven red LEDs and one green LED.

Other components on the surface of the 531X179PLKAJG1 include integrated circuits, transistors, a rectifier diode and other diodes, four potentiometers, capacitors of various materials, jumper switches, and resistors. Connections to other boards or off-board components are made through two two-pin header connectors, a third header connector, and two terminal strips. The terminal strips are located on opposite sides of the board, both parallel to and next to a short board edge.

If handling or maintenance procedures are needed please refer to publications released by GE. These will also provide installation instructions. Publications include series user guides, drive manuals, and individual board data sheets.

","meta_title":"Drive Application Card","meta_description":"Drive Application Card","keywords":"Drive Application Card","series_page_description":"Drive Application Card","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-11 13:31:16","prod_pdf":[{"id":1845,"product_id":14209,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14210,"part_number":"531X179PLMAHG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"General Electric Power Line Monitor Card. Call Now!","short_desc":"The 531X179PLMAHG1 is a Power Line Monitor Card","content":"

531X179PLMAHG1--Power Line Monitor Card

The 531X179PLMAHG1 is a board component manufactured by GE to fit into their general purpose drive systems. This includes systems like the DC-300 and other similar drives.

The 531X179PLMAHG1 is a Power Line Monitor Card. This board sometimes mounts as the top of two stacked cards mounted in a frame. The board has drilled mounting holes in the corners to allow for this. The board is marked with codes like GE-Fanuc and VA-5. It also has its alternate F31x board number printed on its front surface.

The 531X179PLMAHG1 has two terminal strips of two different types. One of these is located on one edge of the board and the other is located on the opposing edge. It also has three header connectors, including two two-pin headers and one larger connector. The board has two switch components with five toggles each. These toggles can be individually set.

The 531X179PLMAHG1 has a single fuse. This is placed next to the board’s only transformer. The 531X179PLMAHG1 has three relays, four potentiometers, several jumper switches, and several transistors.

There are eight integrated circuits on the 531X179PLMAHG1. There are eight LEDs placed in a single line; this includes one green LED and seven red LEDs. Other components on the board include capacitors made from ceramic material, electrolytic material, and polyester vinyl material, as well as resistors and diodes. More information may be found through drive manuals, series user guides, or board data sheets originally published by General Electric. GE provided all original technical support for this board series.

","meta_title":"General Electric Power Line Monitor Card. Call Now!","meta_description":"General Electric Power Line Monitor Card. Call Now!","keywords":"General Electric Power Line Monitor Card. Call Now!","series_page_description":"General Electric Power Line Monitor Card. Call Now!","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-11 14:16:09","prod_pdf":[]},{"id":14211,"part_number":"531X179PLMAJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE POWER LINE MONITOR BOARD","short_desc":null,"content":"

The 531X179PLMAJG1 is a Power Line Monitor board. This board is made by General Electric. The 531X179PLMAJG1 has a fifteen port green female connector on one end and a fifteen port black female connector on the opposite end. Next to the green female port is a long white male port, near the black female port is a small two prong male port. These various ports are used to connect the circuit board into an established system. The 531X179PLMAJG1 has one transformer in the upper left corner. A transformer is used to transfer electrical energy between two or more circuits. The first style of a transformer to be widely used was called an induction coil. The induction coil was invented by Rev. Nicholas Callan of Maynooth College in Ireland in 1836. The 531X179PLMAJG1 has a single glass fuse. The fuse was patented by Thomas Edison in 1890. They are used to protect electric distribution systems from power surges. They sacrifice themselves to protect the rest of the electrical components. If a fuse blows the electrical current can’t go any further. The 531X179PLMAJG1 has multiple resistors of various sizes. The 531X179PLMAJG1 uses the resistors to convert energy to heat in order to get rid of energy the 531X179PLMAJG1 doesn’t need. The 531X179PLMAJG1 also has condensers (capacitors) of various shapes and sizes. The 531X179PLMAJG1 has Integrated Circuits, diodes, Variable Resistors, and LEDs to assist in performing the 531X179PLMAJG1’s duty. The 531X179PLMAJG1 has since been discontinued.

To receive more details please email or call the staff at AX Control.

","meta_title":"GE POWER LINE MONITOR BOARD","meta_description":"GE POWER LINE MONITOR BOARD","keywords":"GE POWER LINE MONITOR BOARD","series_page_description":"GE POWER LINE MONITOR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 09:17:42","prod_pdf":[]},{"id":14212,"part_number":"531X179PLMAKG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Power Line Monitor","short_desc":null,"content":"

The 531X179PLMAKG1 is a product of General Electric. The 531X179PLMAKG1 is a Power Line Monitor. The 531X179PLMAKG1 has a line of light emitting diodes (LEDs) in the center of the circuit board. Seven of the LEDs are red and one of the LEDs is green. The 531X179PLMAKG1 has two small transistors. The 531X179PLMAKG1 condensers (capacitors) of different shapes and sizes. These condensers are used to create individual pockets of electrical fields to store energy for the circuit board to use as needed. The 531X179PLMAKG1 has four small blue Variable Resistors used to control a small amount of energy each. The 531X179PLMAKG1 has various diodes around the surface of the circuit board used to control the direction of the energy current. The diodes have been around since 1873. The 531X179PLMAKG1 has two blue boxes with five white buttons. The buttons are labeled one through five across the top and has OFF written underneath the buttons. The 531X179PLMAKG1 has eight Integrated Circuits. These Integrated Circuit are used to store all the information that the 531X179PLMAKG1 uses to function. The Integrated Circuits are called by other names in manuals such as IC, chips, or microchips. The 531X179PLMAKG1 has multiple resistors. The 531X179PLMAKG1 attaches to the system using multiple female and male terminals. The 531X179PLMAKG1 also has a fuse and a transistor. The 531X179PLMAKG1 is no longer being made by General Electric and is an outdated circuit board.

If you would like more details or a price quote, you can reach AX Control by phone or email.

","meta_title":"Power Line Monitor","meta_description":"Power Line Monitor","keywords":"Power Line Monitor","series_page_description":"Power Line Monitor","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 11:16:26","prod_pdf":[{"id":1844,"product_id":14212,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14213,"part_number":"531X1821FGAGG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE INVERTER FIRING GENERATOR BOARD","short_desc":null,"content":"

The 531X1821FGAGG1 is a VA-5 Inverter Firing Generator produced by General Electric. The 531X1821FGAGG1 uses twenty chips to store information coding to tell the circuit board what to do and when to do it. Chips are also called Microchips or Integrated Circuits (abbreviated IC) in various manuals. The 531X1821FGAGG1 has seven male attachment points. These attachments points are used with various wiring harnesses to allow communication between the 531X1821FGAGG1 and neighboring circuit boards. To secure the 531X1821FGAGG1 into place there are eight holes around the perimeter of the circuit board. The 531X1821FGAGG1 uses condensers (also called capacitors in English written manuals) of every size and shape to store energy in their electrical fields for the circuit board to access later. The 531X1821FGAGG1 has a few transistors to help amplify signals around the circuit board. The 531X1821FGAGG1 uses multiple diodes to direct energy flow. Each diode has a line near one of its ends. This small line is there to indicate which way the energy is moving (it flows towards the line). The 531X1821FGAGG1 also uses another device to control energy flow across the circuit board. These devices are called Jumper Ports. They are small metal pins placed around the circuit board where the energy current could flow. To allow or not allow the energy to move in that direction the Jumper Ports have covers to act as a switch. The 531X1821FGAGG1 can also get rid of energy if need be, by converting the energy into heat using its many resistors.

You can email or call AX Control for more details.

","meta_title":"GE INVERTER FIRING GENERATOR BOARD","meta_description":"GE INVERTER FIRING GENERATOR BOARD","keywords":"GE INVERTER FIRING GENERATOR BOARD","series_page_description":"GE INVERTER FIRING GENERATOR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 11:44:35","prod_pdf":[]},{"id":14214,"part_number":"531X182IFGAEG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE INVERTER FIRING GENERATOR CARD","short_desc":null,"content":"

The 531X182IFGAEG1 is a VA-4 Inverter Firing Generator card. This product is from General Electric. The 531X182IFGAEG1 has three red light emitting diodes (LEDs of short) at the base of the circuit board. The 531X182IFGAEG1 has various other diodes around the circuit board to direct energy flow. These diodes can be compared to a one-way street. They only allow energy to go in one direction. The 531X182IFGAEG1 uses resistors to eliminate energy that the circuit board does not use. The resistors have various colored marks that are there to allow the engineer to calculate the amount of energy each resistor can disperse. If the 531X182IFGAEG1 needs to store or save energy it uses its capacitors. These devices create an electrical field as the energy current passes through it. This electrical field then takes and stores the energy and does not let any escape. The 531X182IFGAEG1 has seven small transistors that are identifiable by the three contact points. These tiny components help amplify or can change the power or signals of the circuit board. All of these components and the circuit board as a whole are controlled by the eighteen Integrated Circuits. These are the brains of the circuit board and have all the data and programs to keep everything running smoothly. At the bottom of the circuit board is a small box with the following written inside. It reads JP1, JP2, JP3, JP4, JP5, JP6. Underneath this, it reads PINS 1-2 FOR 500 KVA and PINS 2-3 FOR 200 KVA.

For more details please call or email AX Control.

","meta_title":"GE INVERTER FIRING GENERATOR CARD","meta_description":"GE INVERTER FIRING GENERATOR CARD","keywords":"GE INVERTER FIRING GENERATOR CARD","series_page_description":"GE INVERTER FIRING GENERATOR CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 14:12:48","prod_pdf":[]},{"id":15041,"part_number":"531X182IFGAHG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PC INVERTER FIRING GENERATOR BOARD","short_desc":null,"content":"

The 531X182IFGAHG1 is a VA-5 Inverter Firing Generator constructed by General Electric. The 531X182IFGAHG1 can also get rid of energy if need be, by converting the energy into heat using its many resistors. The 531X182IFGAHG1 uses twenty chips to store data codes to tell the circuit board what to do and when to do it. Chips are also referred to as Integrated Circuits (abbreviated IC) or Microchips in various manuals. The 531X182IFGAHG1 uses devices to control energy flow across the circuit board. These devices are called Jumper Ports. They are small metal sticks placed around the circuit board where the energy current could flow. To allow or not allow the energy to move in that direction the Jumper Ports have covers to act as a switch. The 531X182IFGAHG1 uses various diodes to direct energy flow. Each diode has a line near one of its ends. This small line is there to indicate which way the energy is moving (it flows near the line). The 531X182IFGAHG1 has seven masculine attachment points. These connection points are used with various wiring harnesses to allow interaction between the 531X182IFGAHG1 and adjacent circuit boards. To lock the 531X182IFGAHG1 into place there are eight puncture holes around the perimeter of the circuit board. The 531X182IFGAHG1 uses capacitors (also called condensers in manuals in other languages) of multiple shapes and sizes to house energy in their electrical fields for the circuit board to access later. The 531X182IFGAHG1 has a few transistors to intensify signals around the circuit board.

You can email or call AX Control for more details.

","meta_title":"GENERAL ELECTRIC PC INVERTER FIRING GENERATOR BOARD","meta_description":"GENERAL ELECTRIC PC INVERTER FIRING GENERATOR BOARD","keywords":"GENERAL ELECTRIC, PC INVERTER, FIRING GENERATOR BOARD","series_page_description":"GENERAL ELECTRIC PC INVERTER FIRING GENERATOR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-05 14:15:07","prod_pdf":[]},{"id":14215,"part_number":"531X182IFGAJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"INVERTER FIRING GENERATOR GE BOARD","short_desc":"The 531X182IFGAJG1 is an INVERTER FIRING GENERATOR GE BOARD","content":"

The 531X182IFGAJG1 is a PCB component manufactured by the General Electric company for use within several of their general purpose drive systems. This includes the DC-300 drive, which is an adjustable speed drive system with AC or DC inputs and outputs. Your system’s user guide or manual should help determine compatibility with this board.

The 531X182IFGAJG1 functions as an Inverter Firing Generator Card. This board is lettered on one edge and numbered on another. Information about the pin location of jumper switches one through six and eight through ten is printed on the surface of the board for quick reference. The code 006/02 and the board id number are printed on the board.

The 531X182IFGAJG1 is populated by seven vertical pin connectors. Four of these are marked “Test only.” The board has seventeen resistor network arrays. It has eleven jumper switches, two transistors, and several TP test points. The board has ceramic and polyester vinyl capacitors and metal film resistors, as well as multiple diodes. The board has four LED indicators. These are labeled ACOV, BCOV, CCOV, and PERR. Integrated circuits include oscillating chips and a field programmable gate array. This chip has a 4mA output sink with error checking of the configuration bitstream. All integrated circuits on the board are marked with their manufacturer part numbers.

More information about the 531X182IFGAJG1, its function, or information on handling or installation can be accessed through publications like manuals or user guides from GE that reference this part number. Technical support for the 531x series was originally provided by General Electric.

","meta_title":"INVERTER FIRING GENERATOR GE BOARD","meta_description":"INVERTER FIRING GENERATOR GE BOARD","keywords":"INVERTER FIRING GENERATOR GE BOARD","series_page_description":"INVERTER FIRING GENERATOR GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 09:35:41","prod_pdf":[]},{"id":14217,"part_number":"531X184IPTADG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"INV PULSE TRANSFORMER BOARD","short_desc":"The 531X184IPTADG1 is an Inv. Pulse Transformer Board","content":"

531X184IPTADG1--Inv. Pulse Transformer Board

The 531X184IPTADG1 is a board component fabricated by General Electric as part of their general purpose drive systems. This includes systems like the AC-300 and the DC-300.

The 531X184IPTADG1 functions as an Inverse Pulse Transformer Board. This is a large, long rectangular board with few components. It is marked with codes like VA-4, FR00/0, 002/1 and with the board’s alternate F31x board number. It is drilled for mounting in each corner.

The 531X184IPTADG1 has a line of six transformers placed on its top edge. These components are set in a single line but are not placed across the board in an equidistant way. Rather, there is a set of three, then one, then a set of two. Each one of these ‘sets’ has its own red LED indicator associated with it. Each transformer has a two-pin header connector, a carbon composite resistor, a ceramic capacitor, and a metal film resistor grouped with it. In between the single transformer and the group of two, there is a line of eight stab-on connectors. These are set on the board in pairs.

The left edge of the 531X184IPTADG1 has two vertical pin cable connectors. Next to these components, there is a line of resistors and capacitors, and then another line containing two integrated circuits and a single high voltage electrolytic capacitor. The board is empty beside the components located on the left and top edges. More information on this board can be found through GE publications such as drive manuals, data sheets, or series user guides.

","meta_title":"INV PULSE TRANSFORMER BOARD","meta_description":"INV PULSE TRANSFORMER BOARD","keywords":"INV PULSE TRANSFORMER BOARD","series_page_description":"INV PULSE TRANSFORMER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-12 08:54:32","prod_pdf":[]},{"id":15042,"part_number":"531X184IPTAEG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PULSE TRANSFORMER BOARD","short_desc":null,"content":"

The 531X184IPTAEG1 is a Pulse Transformer Board. The 531X184IPTAEG1 is a large board however, it doesn’t contain a lot of parts on it. Over ninety percent of the circuit board is empty space. The 531X184IPTAEG1 has six transformers on the upper edge of the circuit board. A transformer by definition is a static electrical device that transfers electrical energy between two or more circuits. In Ireland at Maynooth College in 1836 Rev. Nicholas Callan invented the first widely used transformer called an induction coil. The 531X184IPTAEG1 has capacitors to store energy in electric fields that they create. The 531X184IPTAEG1 uses resistors to disperse energy that the 531X184IPTAEG1 no longer needs. The 531X184IPTAEG1 uses a few diodes to control the direction of the energy current. The 531X184IPTAEG1 has a few resistors. These resistors help release unwanted energy. The 531X184IPTAEG1 has two microchips that are used to store the instructions for the circuit board. Attempt to create a microchip has been happening since 1949. The successful creation was made by Jack Kilby. He first proposed the idea it to the US Army in 1957 and led to the Micromodule Program which was short lived. On September 12, 1958, Jack Kilby demonstrated the first working integrated example. He filed for a patent on February 6, 1959. The first customers for the microchip were the US Air Force. Jack Kilby later won a Nobel Prize for his invention in 2000. The 531X184IPTAEG1 also has multiple connection points along the edge so it can communicate and function with other circuit boards.

Call or email AX Control for more details.

","meta_title":"GENERAL ELECTRIC PULSE TRANSFORMER BOARD","meta_description":"GENERAL ELECTRIC PULSE TRANSFORMER BOARD","keywords":"GENERAL ELECTRIC, PULSE TRANSFORMER BOARD","series_page_description":"GENERAL ELECTRIC PULSE TRANSFORMER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 10:06:15","prod_pdf":[]},{"id":14216,"part_number":"531X184IPTAFG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"INV PULSE TRANSFORMER BOARD","short_desc":"The 531X184IPTAFG1 is an Inverse Pulse Transformer Card","content":"

531X184IPTAFG1--Inverse Pulse Transformer Card

The 531X184IPTAFG1 is a PCB component manufactured by GE to fit into several of their general purpose drive systems, like the DC-300 or the AC-300. Many of these systems are now obsolete. However, they were designed by GE to be used for a variety of industrial applications.

The 531X184IPTAFG1 is an Inverse Pulse Transformer Board. It has very few components on its surface. Most components are grouped alone the left and top edges of the board.

The 531X184IPTAFG1 has eight connectors for communicating with other boards or with off-board components. This includes six 2-pin header connectors (male) and two male vertical pin cable connectors. Headers are placed along the top edge and cable connectors are on the left edge. The board also has two terminal pin connectors. These are labeled 24V and PCOMR. Finally, there are eight stab-on connectors placed in a single line along the top edge of the board.

The 531X184IPTAFG1 has six transformers. Each transformer is paired with a ceramic capacitor, a diode, and two resistors (one CCR and one metal film.) Three transistors also have an LED indicator located next to it.

The 531X184IPTAFG1 has two integrated circuits. There is a high-capacity electrolytic capacitor located between them. The board is drilled at each corner and along each long edge to allow for mounting. General Electric was originally responsible for all technical support for 531x boards. Please refer to GE user guides, data sheets, or manuals for more information regarding the installation, maintenance, or operation of this board.

","meta_title":"INV PULSE TRANSFORMER BOARD","meta_description":"INV PULSE TRANSFORMER BOARD","keywords":"INV PULSE TRANSFORMER BOARD","series_page_description":"INV PULSE TRANSFORMER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-12 09:12:31","prod_pdf":[]},{"id":14218,"part_number":"531X185CPTAKG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"PC AC500 CONV PULSE XFMR BOARD","short_desc":null,"content":"

The 531X185CPTAKG1 is a VA-5 Conv. Pulse Transformer circuit board. This circuit board is manufactured by General Electric. The 531X185CPTAKG1 is a large circuit board with many large pieces. The 531X185CPTAKG1 has nine large black resistors. All the large resistors have the following printed on the side: HE1-8808, FS-20S-1 N, 104X123DA010, 2.2 C/C. This is a code to tell the engineer the capability of these resistors. There are two smaller black resistors with the following printed on the side: CG5, 33Ω 5%, 3W. There are also thirty-eight resistors with strips know as axial-lead resistors. The strips are various colors and allow the engineer to calculate their ability using an equation and a color code which gives each colored strip a numerical value. The 531X185CPTAKG1 has fifteen black diodes with a small grey line at one end. The line is used to show the energy’s movement (it flows toward the line). The 531X185CPTAKG1 has three sets of Jumper Ports. Each Jumper Port has two positions and can be changed using the sleeve caps. The 531X185CPTAKG1 has six small yellow capacitors, one blue tower capacitor with 100UF-30V, LC-E 85°C, 52-8925 written on the side, and four large silver capacitors with CSC, .22-1200VDC-660 VAC, 104X122AA441, P168116, 8949, 4, written on the side. These large capacitors are also secured with a zip tie to keep them stable. The 531X185CPTAKG1 has six transformers along the upper edge. Near the seconded, fourth and sixth transformer is a small red LED. In between the first and second, the third and fourth, and the fifth and sixth transformers are two male clips.

For additional details call or email AX Control.

","meta_title":"PC AC500 CONV PULSE XFMR BOARD","meta_description":"PC AC500 CONV PULSE XFMR BOARD","keywords":"PC AC500 CONV PULSE XFMR BOARD","series_page_description":"PC AC500 CONV PULSE XFMR BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 11:03:08","prod_pdf":[]},{"id":15043,"part_number":"531X185CPTALG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC TRANS BOARD","short_desc":"The 531X185CPTALG1 is a GE board component","content":"

The 531X185CPTALG1 is a board component manufactured by GE as part of the DC-300 drive. It can also be used in other general purpose drive systems manufactured by General Electric. GE general purpose drives are flexible, powerful systems primarily used in industrial applications. Your user guide or system manual will help you establish if your particular system is compatible with the 531x series of boards.

The 531X185CPTALG1 is a long rectangular shaped board with few components. The bottom edge of the board has six transformers placed in single well-spaced line. Three of these components are paired with a red LED indicator. Each of the components has a two-pin header connector nearby, along with three resistors of varying materials.

The 531X185CPTALG1 has three fuse components mounted into fuse clips. The board has four through-hole electrolytic capacitors and one supercapacitor. It has wire wound resistors, carbon composite resistors, and metal film resistors.

The 531X185CPTALG1 is marked with the code VA-5. It is drilled twice in each corner and had additional drill marks within the body of the board. The board is built with two vertical pin cable connectors (male,) as well as multiple stab-on connectors. The center of the board is taken up by a printed table on the surface that allows users to have information for board function immediately available to them. For more information on the operation of this board, or for information on board components, please refer to manuals, data sheets, or user guides from this series that reference this particular board number.

","meta_title":"GENERAL ELECTRIC TRANS BOARD","meta_description":"GENERAL ELECTRIC TRANS BOARD","keywords":"GENERAL ELECTRIC, TRANS BOARD","series_page_description":"GENERAL ELECTRIC TRANS BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-26 13:46:26","prod_pdf":[]},{"id":14219,"part_number":"531X185CPTAMG1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"AC500 CONVERTER PCB GE","short_desc":"The 531X185CPTAMG1 is an AC 500 Converter","content":"

531X185CPTAMG1--AC 500 Converter

The 531X185CPTAMG1 is a PCB component fabricated by General Electric for their general purpose drive systems like the AC-500 and like drives. Primarily used in industrial applications, GE general purpose drives were originally designed to be powerful, flexible systems. Many of these drives are now considered obsolete.

The 531X185CPTAMG1 is a large rectangular board. There are six transformers located along the bottom of the board in a single line. Each of these transformers is paired with a two-pin header connector and three resistors. Resistors are both carbon composite and metal film. Three resistors are paired with red light emitting diodes.

The center of the 531X185CPTAMG1 board has three fuses that are mounted into fuse clips. Four through-hole electrolytic capacitors are on the board; these are supported by zip ties connected to the board. The center of the board also has a printed table that gives the user board function information. There is also a supercapacitor on the left side of the board.

The 531X185CPTAMG1 is drilled for mounting. The board has both stab-on connectors (previously mentioned) and two vertical pin cable connectors. There is a single integrated circuit placed on the board. More information regarding board components, installation or handling procedures, and other information may be found through GE publications like data sheets, drive manuals, or series user guides.

If a product is marked as “ships today” on our site, our team at AX Control will ship it out to you on the same day you place your order. If you need a part immediately, expedited shipping options are available.

","meta_title":"AC500 CONVERTER PCB GE","meta_description":"AC500 CONVERTER PCB GE","keywords":"AC500 CONVERTER PCB GE","series_page_description":"AC500 CONVERTER PCB GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-11 10:31:57","prod_pdf":[]},{"id":14222,"part_number":"531X1860CPSAHG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"COMM POWER SUPPLY BOARD","short_desc":"The 531X1860CPSAHG1 is a Commutation Power Supply Card","content":"

The 531X1860CPSAHG1 is a PCB board manufactured by GE. This PCB is not designed for any specific system; rather, it is designed for use within several general purpose drive systems from the GE company. Please refer to your system’s manufacturer specifications to determine compatibility.

The 531X1860CPSAHG1 functions as a Commutation Power Supply Card. This is also known as a switched-mode power supply. Its main advantage is a greater efficiency due to less dissipation of power as compared to linear regulators. The board is marked “GE FANUC VA-3.” The board is factory drilled in each corner and at five additional points. It also has two tables printed on its surface. One is an AC Volts/Voltage FDBK Jumpers table, while the other is a KVA Rating/ JP5 Pin Setting table.

The 531X1860CPSAHG1 is populated by six transformers. Each of these components is paired with a carbon composite resistor, a metal film resistor, a two-position header connector, and a diode. The board has five additional two-pin header connectors and three vertical pin cable connectors. It has several lines of resistors located elsewhere on the board. Other components include a single MOV (metal oxide varistor,) one integrated circuit, thirteen stab-on connectors, six wire-wound resistors, six axial electrolytic capacitors, and one surface mounted electrolytic capacitor. Stab-on connectors on the top edge of the board are labeled ASAA, ASAM, ASAK, ASBA, ASEM, ASBK, ASCA, ASCM, and ASCK. Stab-on connectors on the side of the board are labeled P2C, N2, P1, and N1. More information about this board and its components may be found through manufacturer publications like manuals or data sheets.

","meta_title":"COMM POWER SUPPLY BOARD","meta_description":"COMM POWER SUPPLY BOARD","keywords":"COMM POWER SUPPLY BOARD","series_page_description":"COMM POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 09:05:07","prod_pdf":[]},{"id":14220,"part_number":"531X186CPSAFG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 COMMUTATION POWER SUPPLY GE BOARD","short_desc":null,"content":"

The 531X186CPSAFG1 is a VA-4 Communication Power Supply Card, produced by General Electric. The 531X186CPSAFG1 has six large silver capacitors, a blue tower capacitor, a small red circular capacitor and a variety of smaller capacitors. The 531X186CPSAFG1 has six large matte black resistors, three medium-sized matte black resistors, six medium-sized axial-lead resistors and a variety of smaller axial-lead resistors. The 531X186CPSAFG1 has six transformers. In the front of each transformer is a small two-pronged male clip. There are five other two-pronged male clips around the circuit board. The 531X186CPSAFG1 has four open spaces labeled R22, R23, R24, and R25, to add additional large resistors. The 531X186CPSAFG1 has five Jumper Ports. Each Jumper port has two different positions. These positions can be changed independently of each other. There is one Integrated Circuit to store information for the 531X186CPSAFG1. Depending on your manual it may also be called a chip, a microchip, or IC (shorthand for Integrated Circuit). The 531X186CPSAFG1 has three black male connectors. The 531X186CPSAFG1 features thirteen metal tabs around two edges of the circuit board. These are used to crimp wiring connectors too. In the center of the circuit board underneath the empty spaces for additional resistors is a small chart that says the following. AC Volt 230, 460, 575. Voltage FD8K Jumpers JP 1-4, 2-3, 1-2, 3-4.

The 531X186CPSAFG1 can be secured using the many pre-drilled holes. The 531X186CPSAFG1 is now considered an obsolete circuit board and is no longer in production.

For additional information please email or call AX Control.

","meta_title":"VA-4 COMMUTATION POWER SUPPLY GE BOARD","meta_description":"VA-4 COMMUTATION POWER SUPPLY GE BOARD","keywords":"VA-4 COMMUTATION POWER SUPPLY GE BOARD","series_page_description":"VA-4 COMMUTATION POWER SUPPLY GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 13:28:52","prod_pdf":[]},{"id":14221,"part_number":"531X186CPSAGG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"COMM POWER SUPPLY BOARD","short_desc":"The 531X186CPSAGG1 is a Commutation Power Supply Card","content":"

531X186CPSAGG1--Commutation Power Supply Card

The 531X186CPSAGG1 is a board component fabricated by GE as part of their general purpose drive systems such as the AC-300 and the DC-300 drive.

The 531X186CPSAGG1 functions as a Commutation Power Supply Card. This is a slightly rectangular board with mounting holes in each corner and along the board edges. The board is marked with multiple codes like VA-4, FR00/0 and its secondary F31x board number.

The 531X186CPSAGG1 has two lines of three transformers. Each of these transformers is paired with a two-pin header connector, a diode, a metal film resistor, and a carbon composite resistor. There are five additional header connectors located elsewhere on the board, as well as more resistors.

The left edge of the 531X186CPSAGG1 is populated by nine stab-on connectors. The bottom edge has an additional four of these connectors. The right edge of the board has three vertical pin cable connectors.

Other components located on the surface of the 531X186CPSAGG1 include six wire-wound resistors that are marked 104x1230A068. These alternate with silver Sprague axial capacitors. The board has an integrated circuit, a metal oxide varistor, and five jumper switches. There are two charts printed on the board’s front surface that explains the jumper settings. The board has additional capacitors and resistors. More information on the board and its components may be found through GE data sheets. Installation procedures and handling guidelines can be found through manuals and user guides. Technical support for this board and other 531x series board was originally provided by General Electric.

","meta_title":"COMM POWER SUPPLY BOARD","meta_description":"COMM POWER SUPPLY BOARD","keywords":"COMM POWER SUPPLY BOARD","series_page_description":"COMM POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-13 13:36:42","prod_pdf":[]},{"id":14223,"part_number":"531X187VCTABG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VOLT CURRENT TRANSDUCER BOARD","short_desc":"General Electric 531X187VCTABG1 531X Board Voltage to Current Transducer Card","content":"

The General Electric 531X187VCTABG1 is a voltage to current transducer card. This two channel board was developed for the 531X series of drive boards. It was designed to operate in Drives Products Operation adjustable drives, including AC-300, DC-300, and AC-500 series drives. Other members of the Drives Products Operation family can operate with this card installed. When installed, the transducer on the board can be used as either a voltage to isolated current or a voltage to isolated voltage.

When installed, 531X187VCTABG1 provides a conversion point for incoming voltages into isolated currents. Two isolated outputs can be found labelled as ATB and BTB on the card. The board receives a 24 VDC supply that produces isolated dual power supplies that feed to the outputs of the two channels. A number of features on the board can be adjusted to allow for job specific requirements. Configurable jumpers on the card allows users to adjust the filtering time constant. Users can also adjust the required input level needed to produce a full scale output using the switches found onboard.

Users should strive to meet all installation parameters outlined by the device’s manufacturer. Only qualified personnel trained in handling and assembling drive boards should be permitted to install this board. Wiring is another crucial aspect that should only be performed by experienced personnel. To review a complete guide to wiring and installing 531X187VCTABG1, please refer to the board’s manual and datasheet. General Electric was the original provider of technical support for boards found in the 531X series.

Our friendly and knowledgeable sales team at AX Control is happy to help with all of your automation needs. Please contact our office by phone or email to receive current prices on 531X187VCTABG1, as well as any other parts or repairs.

","meta_title":"GE VOLT CURRENT TRANSDUCER BOARD","meta_description":"GE VOLT CURRENT TRANSDUCER BOARD","keywords":"GE VOLT CURRENT TRANSDUCER BOARD","series_page_description":"GE VOLT CURRENT TRANSDUCER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1843,"product_id":14223,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14224,"part_number":"531X187VCTABH1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"CURRENT TRANSDUCER PCB GE","short_desc":"General Electric 531X187VCTABH1 Voltage to Current Transducer Card 531X Board","content":"

531X187VCTABH1 is a voltage to current transducer card developed by General Electric for the 531X board series. Originally this card was designed for AC-300, DC-300, and AC-500 series Drive Products Operation adjustable speed drives. Now, this board can be placed in almost any Drive Products Operation drive, only in a different mounting location than the previously listed series. This transducer card can operate by converting incoming voltage signals into either isolated current or isolated voltage signals.

A conversion point for voltage inputs is provided by this board. 531X187VCTABH1 includes two isolated outputs, labelled on the board as ATB and BTB. Two isolated power supplies are sourced from the 24 VDC supply fed to the board. Each isolated supply provides power to the outputs of the two channels. Configurable points on the board allow for users to adjust functions as required by individual job loads. Switches located on the card allow for adjustments to the required input levels needed to produce the full scale output. Jumpers are also included to allow users to adjust the filtering time constant on board.

All installation parameters related to the board and the drive should be met by users. Overall drive system integrity is reliant on users following all of these manufacturer provided directions. Only personnel qualified to handle the board should be permitted to install this drive. For a complete guide to wiring 531X187VCTABH1 to its board, please refer to the device manual and datasheet. Technical support for the 531X series of boards was originally provided by General Electric.

AX Control’s trusted sales staff is happy to help with all of your automation needs. Prices for the 531X187VCTABH1 board, as well as other parts and repairs can be obtained by calling or emailing our team.

","meta_title":"CURRENT TRANSDUCER PCB GE","meta_description":"CURRENT TRANSDUCER PCB GE","keywords":"CURRENT TRANSDUCER PCB GE","series_page_description":"CURRENT TRANSDUCER PCB GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14225,"part_number":"531X187VCTADG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE VOLT TRANSDUCER BOARD","short_desc":"General Electric Voltage to Current Transducer Card 531X187VCTADG1 531X Board","content":"

General Electric developed the 531X187VCTADG1 voltage to current transducer card for the 531X series of boards. When installed this transducer card works to convert received voltage signals into either isolated current or isolated voltage signals. Originally, only Drive Products Operation series DC-300, AC-300, and AC-500 drives could accept this card. This card can now be accepted by most drives using Drive Products Operation technology. Mounting locations vary depending on the installed drive.

Voltages are provided with a conversion point when sent to this board. Two isolated outputs, named ATB and BTB, are found on the 531X187VCTADG1 board. Outputs for the two channels are powered by the 24 VDC supply sourced to the board. The individual requirements for specific loads can be met by the configurable points on the board. On board, jumpers allow users to alter the filtering time constant for the signals. Switches also allow for adjustments to change the baseline input level required to produce a complete output.

Installation parameters relating to the board should be met to ensure overall drive operation. Personnel who are trained to install boards should be the only users permitted to handle the 531X187VCTADG1 board. Proper wiring is critical to ensuring proper board function. Please review the complete wiring and installation instructions found in the device’s datasheet and manual. Members of the 531X series of boards were originally provided with technical support by the manufacturer, General Electric.

The knowledgeable staff at AX Control is ready to assist with all of your automation needs. To receive prices on the 531X187VCTADG1 board, or any other part or repair, please contact our sales team by phone or email.

","meta_title":"GE VOLT TRANSDUCER BOARD","meta_description":"GE VOLT TRANSDUCER BOARD","keywords":"GE VOLT TRANSDUCER BOARD","series_page_description":"GE VOLT TRANSDUCER BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14226,"part_number":"531X189LTBAHG1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DC300 LAN TB OPTION CARD","short_desc":"The 531X189LTBAHG1 is a GE DC300 LAN TB OPTION CARD","content":"

531X189LTBAHG1--DC300 LAN TB Option Card

The 531X189LTBAHG1 is a DC300 LAN TB Option Board that has been manufactured by General Electric. This long, narrow board fits into GE’s general purpose drive systems, which were designed to be used primarily in industrial settings. This is one of several versions of the LAN TB Option Board available in the 531x board series.

The 531X189LTBAHG1 is a GE-Fanuc part. GE-Fanuc was a partnership between Fujitsu Ltd and General Electric to fabricate CNC equipment that would have lower manufacturing costs and a higher level of reliability. The board is marked with the GE logo.

The 531X189LTBAHG1 is drilled in each corner and within the body of the board. It has eight relays that are grouped as a line of five, a pair, and a single relay. There are five header connectors, a vertical male cable connector, and one stab-on connector on the board’s surface. Headers vary from nine pins up to twenty-four.

The 531X189LTBAHG1 has a single polyester vinyl capacitor. It has seven jumper switches and three inductor coils. Each jumper is a two-position jumper. Inductors are passive components that help prevent changes in current level or direction.

The final components on the surface of the 531X189LTBAHG1 are three terminal strips. The shortest of these is a three-position strip and the longest has fifty-two screw connections. The remaining terminal strip has eleven screw connections. Each connection on these components is individually labeled and numbered.

For more information regarding the operation or maintenance of the 531X189LTBAHG1, please refer to publications from GE like product manuals, user guides, or data sheets. GE was responsible for technical support for this product.

","meta_title":"GE DC300 LAN TB OPTION CARD","meta_description":"GE DC300 LAN TB OPTION CARD","keywords":"GE DC300 LAN TB OPTION CARD","series_page_description":"GE DC300 LAN TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-25 15:32:00","prod_pdf":[]},{"id":14227,"part_number":"531X189LTBAJG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":12,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-5 LAN TB OPTION CARD","short_desc":null,"content":"

The 531X189LTBAJG1 is a VA-5 Lan Option Card produced by General Electric. The 531X189LTBAJG1 has eight yellow rectangles called contactors, with the following written on the top: Aromat 00323, DS2E-M-DC24V-1C-H267, AG205444 J03. There are six male port that use ribbon harnesses to connect and communicate with other circuit boards. The 531X189LTBAJG1 has seven Jumper Ports. Each set of jumpers have three prongs and has two positions. There is one capacitor and three inductors. The inductors create a magnetic field that stores energy as it passes through the device. The inductors are also referred to as a coil, a choke or a reactor. The name varies depending on the manual you have but they are all the same thing. The 531X189LTBAJG1 also has sixty-six female ports with screws to secure various cables and wires. The ports are labeled as follows, they will be labeled with the number of the port first a dash and what the port label is.

1-K13-19CM, 2-K13NO/NC, 3-K14NO/NC, 4-K15NO/NC, 5-K16NO/NC, 6-K17NO/NC, 7-K18NO/NC, 8-K19NO/NC, 9-LI-1, 10-LI-2, 11-LI-3, 12-LI-4, 13-LI-5, 14-LI-6, 15-LI-7, 16-LI-8, 17-LI-9, 18-LI-10, 19-LI-11, 20-LI-12, 21-LI-13, 22-LI-14, 23-RSET, 24- +15V, 25-MSR, 26- -15V, 27-JOGR, 28-MUP1, 29-MUP2, 30-MUP3, 31-RUN, 32-JOG, 33-REF24, 34-POL, 35-XSTP, 36-CTLN1, 37-CTLN2, 38-IMET, 39-SLD5, 40-VMET, 41-FCMET, 42-PCN, 43-PCP, 44-DTM, 45-/DTM, 46-PFRF, 47-DTB, 48-/DTB, 49-DTA, 50-/DTA, 51-SMET, 52-DM5, 53-S5C, 54-S5NC, 55-S5NO, 56-SCCM, 57-R232, 58-T232, 59-PCOMX, 60-PCOMX, 61-PCOMX, 62-SPRNO, 63-SPRCM, 64-SPRNC, 65-CLA, 66-PSPL.

General Electric is the provider of all technical support in the form of instruction manuals and data sheets. The 531X189LTBAJG1 has now considered an obsolete part.

Call or email AX Control for more details.

","meta_title":"VA-5 LAN TB OPTION CARD","meta_description":"VA-5 LAN TB OPTION CARD","keywords":"VA-5 LAN TB OPTION CARD","series_page_description":"VA-5 LAN TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 12:14:15","prod_pdf":[]},{"id":16488,"part_number":"531X189LTBAKG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC OPTION BOARD","short_desc":"The 531X189LTBAKG1 is a GE LAN TB Option Card","content":"

531X189LTBAKG1--LAN TB Option Card

The 531X189LTBAKG1 LAN Terminal Board Option Card is fabricated by GE as part of the company’s general purpose drive systems. This includes the DC300 or the AC500. Please refer to your particular drive’s manual to establish compatibility with this board. There are several versions of the LAN TB Option Card within the 531x board series.

The 531X189LTBAKG1 is a long and narrow board. It is populated by a number of connectors, including five header connectors. Four of these are placed side-by-side along the top board edge. The last connector is along the middle of the board. These connectors vary from nine pins to twenty-four pins. Additionally, the board has a single vertical pin (male) cable connector, a single terminal pin connector, and a stab-on connector. It also has three terminal strips that include a three-position strip, an eleven position strip, and a fifty-two position strip. Each screw connection on the terminal strips is individually labeled.

Other components on the 531X189LTBAKG1 include three inductor coils, a polyester vinyl capacitor, metal film resistors, and several jumper switches. Jumpers can be individually set to customize board use. The board is drilled in several locations. It is marked with its board number and an alternate board number, along with several codes and the GE logo.

Information regarding installation, maintenance or handling can be found through publications originally distributed and provided by General Electric. This includes manuals, data sheets, and series user guides. Please follow all recommended safety and handling procedures.

","meta_title":"GENERAL ELECTRIC OPTION BOARD","meta_description":"GENERAL ELECTRIC OPTION BOARD","keywords":"GENERAL ELECTRIC OPTION BOARD","series_page_description":"GENERAL ELECTRIC OPTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-19 14:49:58","prod_pdf":[]},{"id":14228,"part_number":"531X190SRCAFG1","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"SNUBBER RESISTER CARD GE","short_desc":null,"content":"

The 531X190SRCAFG1 is a VA-4 Snubber Resistor Card. The 531X190SRCAFG1 is a very small circuit board. The 531X190SRCAFG1 has two large resistors. The resistors are used to restrict or diffuse energy. The 531X190SRCAFG1 has two medium diodes with a silver line that shows the direction of energy flow. The energy moves towards that silver line. The 531X190SRCAFG1 has two large red circular capacitors. The capacitors are used to store energy in an electrical field that it creates. The 531X190SRCAFG1 has two metal prongs on the outer sides of the capacitors. The 531X190SRCAFG1 has a curved metal table on the opposite side of the capacitors, with a hole in it to connect the circuit board to other circuit boards.

General Electric is the provider of technical support. General Electric also has instruction manuals and data sheets that go through safety parodical and installation instructions.

For additional information or a price quote please email or call AX Control.

","meta_title":"SNUBBER RESISTER CARD GE","meta_description":"SNUBBER RESISTER CARD GE","keywords":"SNUBBER RESISTER CARD GE","series_page_description":"SNUBBER RESISTER CARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 15:16:42","prod_pdf":[]},{"id":15044,"part_number":"531X190SRCAFG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC PC VA-4 SNUBBER CARD","short_desc":null,"content":"

The 531X190SRCAFG3 is a VA-4 Snubber Resistor Card. The 531X190SRCAFG3 is a very small circuit board. The 531X190SRCAFG3 has two large resistors. The resistors are used to restrict or diffuse energy. The 531X190SRCAFG3 has two medium diodes with a silver line that shows the direction of energy flow. The energy moves towards that silver line. The 531X190SRCAFG3 has two large red circular capacitors. The capacitors are used to store energy in an electrical field that it creates. The 531X190SRCAFG3 has two metal prongs on the outer sides of the capacitors.

General Electric is the provider of technical support. General Electric also has instruction manuals and data sheets that go through safety parodical and installation instructions.

For additional information or a price quote please email or call AX Control.

","meta_title":"GENERAL ELECTRIC PC VA-4 SNUBBER CARD","meta_description":"GENERAL ELECTRIC PC VA-4 SNUBBER CARD","keywords":"GENERAL ELECTRIC, PC VA-4 SNUBBER CARD","series_page_description":"GENERAL ELECTRIC PC VA-4 SNUBBER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 15:30:23","prod_pdf":[]},{"id":14229,"part_number":"531X190SRCAFG4","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"VA-4 SNUBBER RESISTER GE CARD","short_desc":null,"content":"

The 531X190SRCAFG4 is a VA-4 Snubber Resistor Card. The 531X190SRCAFG4 is a very small circuit board. The 531X190SRCAFG4 has two medium diodes with a silver line that shows the direction of energy flow. The energy moves towards that silver line. The 531X190SRCAFG4 has two large red circular capacitors. The capacitors are used to store energy in an electrical field that it creates. The 531X190SRCAFG4 has two metal prongs on the outer sides of the capacitors. The 531X190SRCAFG4 has two large resistors. The resistors are used to restrict or diffuse energy. The 531X190SRCAFG4 has a curved metal table on the opposite side of the capacitors, with a hole in it to connect the circuit board to other circuit boards.

General Electric is the provider of technical support. General Electric also has instruction manuals and data sheets that go through safety parodical and installation instructions.

For additional information or a price quote please email or call AX Control.

","meta_title":"VA-4 SNUBBER RESISTER GE CARD","meta_description":"VA-4 SNUBBER RESISTER GE CARD","keywords":"VA-4 SNUBBER RESISTER GE CARD","series_page_description":"VA-4 SNUBBER RESISTER GE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 15:43:21","prod_pdf":[]},{"id":14230,"part_number":"531X190SRCAGG1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PRINTED CIRCUIT BOARD","short_desc":null,"content":"

General Electric is the provider of technical support. General Electric also has instruction manuals and data sheets that go through safety parodical and installation instructions.

The 531X190SRCAGG1 is a VA-4 Snubber Resistor Card. The 531X190SRCAGG1 is a very small circuit board. The 531X190SRCAGG1 has two large red circular capacitors. The capacitors are used to store energy in an electrical field that it creates. The 531X190SRCAGG1 has two metal prongs on the outer sides of the capacitors. The 531X190SRCAGG1 has two large resistors. The resistors are used to restrict or diffuse energy. The 531X190SRCAGG1 has two medium diodes with a silver line that shows the direction of energy flow. The energy moves towards that silver line. The 531X190SRCAGG1 has a curved metal table on the opposite side of the capacitors, with a hole in it to connect the circuit board to other circuit boards.

For additional information or a price quote please email or call AX Control.

","meta_title":"GE PRINTED CIRCUIT BOARD","meta_description":"GE PRINTED CIRCUIT BOARD","keywords":"GE PRINTED CIRCUIT BOARD","series_page_description":"GE PRINTED CIRCUIT BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-13 15:47:29","prod_pdf":[]},{"id":14231,"part_number":"531X190SRCAGG2 ","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"SNUBBER CARD RESISTER GE BOARD","short_desc":"The 531X190SRCAGG2 is a GE Snubber Resistor Card","content":"

The 531X190SRCAGG2 is a GE Snubber Resistor Card. Snubbers are typically a small network of parts with a function of controlling the effects of circuit reactances. They enhance the performance of switching circuits and typically result in higher efficiency and reliability.

The 531X190SRCAGG2 is a small board with very few components. The board is mounted to a white underlayment that has a small metal stab that allows for easier mounting of the board within the larger system. This metal stab is marked 20920. The board itself is a shaped board with two short ‘legs’ positioned off its bottom edge. The board carries the GE logo, as well as the codes 1991 and 006/00 and 002/00. It is also marked with an alternate board number of F31X190SRCAGG1.

The 531X190SRCAGG2 is populated by two stab-on connectors. These are located in both of the upper board corners. Inside and beside of these components is a MOV or metal oxide varistor. Varistors are variable resistors that provide over-voltage protection by means of voltage-clamping, similar to a zener diode. There are two zener diodes located on the board, directly in front of the MOVs.

The final components located on the surface of the 531X190SRCAGG2 are two wire wound resistors. Each of these is fastened to the board using thru bolts and brackets. Wire wound resistors are designed to withstand frequent start/stop cycles and are ideal for applications involving high currents at a very low resistance value. More information on this part may be found through publications from the manufacturer, such as data sheets or user guides.

","meta_title":"SNUBBER CARD RESISTER GE BOARD","meta_description":"SNUBBER CARD RESISTER GE BOARD","keywords":"SNUBBER CARD RESISTER GE BOARD","series_page_description":"SNUBBER CARD RESISTER GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-06 11:26:20","prod_pdf":[]},{"id":14232,"part_number":"531X190SRCAGG4","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"SNUBBER RESISTOR CARD","short_desc":"The 531X190SRCAGG4 is a Snubber Resistor Card","content":"

531X190SRCAGG4--Snubber Resistor Card

The 531X190SRCAGG4 is a very small circuit board fabricated by GE. This board fits into their general purpose drives like the DC-300 or the AC-300. While some of these drives are now considered obsolete, they were originally designed by General Electric as dynamic, flexible systems capable of use within industrial settings for a number of tasks.

The 531X190SRCAGG4 is a Snubber Resistor Card. There are several versions of this card within the 531x series; not all SRCA boards are compatible with all drives. Please check your drive manual for compatibility. Snubbers are simple energy-absorbing circuits typically used to eliminate the voltage spikes that occur when a switch opens.

The 531X190SRCAGG4 is mounted on to a flexible white underlayment with a metal arm built with a flange. This flange gives the 531X190SRCAGG4 more mounting options. The board itself is roughly 2 ½ inches by 3 ¼ inches. It is a shaped card with two legs on one side of the board. The board has two openings that are ringed with a conductive material.

The 531X190SRCAGG4 has only a few components. This includes two diodes, marked D1 and D2. It has two metal oxide varistors (MOV1 and MOV2) placed on one short board edge. There are also two stab-on connectors. These are placed on either side of the metal oxide varistors. The last components are two wire-wound resistors. These axial components are marked 104x123DA066 2.2 CC. More information on this board may be found through GE publications like data sheets, manuals, and series user guides. General Electric provided all the original technical support for the 531x series.

","meta_title":"SNUBBER RESISTOR CARD","meta_description":"SNUBBER RESISTOR CARD","keywords":"SNUBBER RESISTOR CARD","series_page_description":"SNUBBER RESISTOR CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-14 09:24:06","prod_pdf":[]},{"id":14233,"part_number":"531X191RTBAEG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LAN RTB OPTION CARD","short_desc":"General Electric 531X191RTBAEG1 Relay Terminal Board 531X Series","content":"

The General Electric 531X191RTBAEG1 is a relay terminal board. A replacement card from the 531X series, this board has the ability to be installed into a number of exciters and drives across the GE family. This board serves a dual purpose while operating in a drive cabinet. Seven onboard relays can be used to control external circuitries. The card also provides users with access via the terminal board to individual coils and contacts.

531X191RTBAEG1 provides the drive and the user with a variety of board functions. Control functions for external circuits is one of the jobs this board can perform. The relay terminal board can accurately provide a calculation for RTB points and relay contacts found on the unit. As a G1 member of the series, this board includes a 115 VAC coil featuring a 50/60 Hz frequency. While holding, the board rates at 9 mA. Contacts found on the board include a rated current of 0.7 A DC and a voltage of 105 VDC.

Any provided installation parameter outlined by the manufacturer should be met. The integrity of the board is dependent upon users following these instructions. Do not permit any untrained or unqualified personnel to handle or install the 531X191RTBAEG1 relay terminal board. Proper wiring is necessary to ensuring overall drive functionality. A complete guide to wiring this board can be found in the device manual as well as the datasheet. Members of the 531X series, including this relay board, were originally provided technical support by the manufacturer, General Electric.

Our knowledgeable and friendly sales team at AX Control is more than happy to help with all of your automation needs. Prices on the 531X191RTBAEG1 relay terminal board, or any other part or repair, can be obtained by contacting our team by phone or email.

","meta_title":"LAN RTB OPTION CARD","meta_description":"LAN RTB OPTION CARD","keywords":"LAN RTB OPTION CARD","series_page_description":"LAN RTB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14234,"part_number":"531X191RTBAEG2","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":3,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE OPTION BOARD","short_desc":"General Electric 531X191RTBAEG2 Relay Terminal Board 531X Series","content":"

General Electric developed the 531X191RTBAEG2 relay terminal card for the 531X board series. Members of this series are replacement boards, allowing them to be installed in a number of GE brand drives. This card provides users with access to a number of on board features. When installed, the terminal board provides seven relays that control external circuits. The card also allows users to access coils and contacts using the terminal board.

531X191RTBAEG2 provides users with useful board and drive functions. External circuits attached to the board can be controlled using this relay terminal card. Calculations for RTB points and relay contacts are also performed by this board. Internally, the card contains a 115 VAC coil that includes a 50/60 Hz. A number of indicator lights are also found on board. These integrated LED indicators provide visual cues to users of which relays are energized.

A number of manufacturer provided installation parameters are included with this board. Meeting these requirements will protect the overall integrity of the entire drive unit. Installation of the 531X191RTBAEG2 board should only be completed by qualified personnel trained to handle these cards. Installation and wiring instructions are available in the board’s manual as well as the datasheet. General Electric, the manufacturer of this board, was the original provider of technical support.

AX Control’s helpful and knowledgeable sales team is happy to help with all of your 531X191RTBAEG2 needs. Pricing for this board, as well as any other available part, can be obtained by contacting our office by phone or email.

","meta_title":"GE OPTION BOARD","meta_description":"GE OPTION BOARD","keywords":"GE OPTION BOARD","series_page_description":"GE OPTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14235,"part_number":"531X191RTBAFG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DC300 LAN TB OPTION CARD","short_desc":"General Electric 531X191RTBAFG1 Relay Terminal Board 531X Series","content":"

The 531X191RTBAFG1 board is a relay terminal board. General Electric developed this board for its 531X board series. As a member of this replacement board series, the card can be installed into a number of drives from the GE family. A dual purpose is served by this card. Users are provided access to contacts and coils via the card’s terminal board. The card also provides seven relays to control external circuitries.

A number of board functions are provided by this card. 531X191RTBAFG1 contains a 115 VAC coil that features a 50/60 Hz. Holding currents produced rate a 9 mA, while contacts on board rate at 0.7 A DC or 105 VDC. The card can also provide a tabulation of the RTB points and relay contacts. When relays are energized, the integrated LED indicator lights will visually alert users to this status. External circuits fed to the board can also be controlled using this board.

Included with the board is a set of installation parameters that should be met. Following these requirements will ensure that the drive itself will function properly. When installing the board, be sure to only allow qualified personnel to handle or install the card. For instructions to wire 531X191RTBAFG1, refer to the board manual and datasheet. Technical support for this board was originally provided by the series manufacturer, General Electric.

Our helpful and friendly sales staff at AX Control is more than happy to assist with all of your automation needs. To receive pricing on the 531X191RTBAFG1 terminal board, or any other part or repair, please contact our office by phone or email.

","meta_title":"GE DC300 LAN TB OPTION CARD","meta_description":"GE DC300 LAN TB OPTION CARD","keywords":"GE DC300 LAN TB OPTION CARD","series_page_description":"GE DC300 LAN TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14236,"part_number":"531X191RTBAFG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":7,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC RTB TB OPTION CARD","short_desc":"General Electric 531X191RTBAFG3 Relay Terminal Board 531X Series","content":"

General Electric developed the 531X191RTBAFG3 as a relay terminal board. Since the card is a member of the 531X series of replacement boards, it can be installed in an array of drives across the GE family. Two vital functions are performed by this board when installed. The card offers seven relays that are used to control connected external circuits. It can also provide users with access to coils and contacts through the terminal board.

A number of useful features are provided when this board is installed. 531X191RTBAFG3 is capable of operating the control functions for external circuits connected to one of the seven onboard relays. Tabulations for relay contacts and RTB points are also performed by this device. Coils and contacts for this board are rated for G3 revisions of the series. Coils rate at 115 VAC with a frequency of 50/60Hz. Inrush current to the board caps at 25 mA, while holding currents rate at 14 mA. Contacts on the board rate at 2.4 A each, with voltages rated at 125 VAC or 28 VDC.

To protect the integrity of the board, be sure to follow all outlined installation parameters provided by the manufacturer. Only personnel who are trained to install drive components should be permitted to handle this card. Improper handling or wiring can result in damage to the device. To review a guide to wiring the 531X191RTBAFG3 relay board, please refer to the device’s datasheet and manual. All members of the 531X board family were originally provided with technical support by General Electric.

Please contact our office at AX Control by phone or email for all of your automation needs. Prices and availabilities on the 531X191RTBAFG3 board, as well as any other part or repair, can be obtained by contacting our office.

","meta_title":"GENERAL ELECTRIC RTB TB OPTION CARD","meta_description":"GENERAL ELECTRIC RTB TB OPTION CARD","keywords":"GENERAL ELECTRIC RTB TB OPTION CARD","series_page_description":"GENERAL ELECTRIC RTB TB OPTION CARD","quote_description":null,"inventory_notes":"*NO BOX","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14237,"part_number":"531X191RTBAFG4","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RTB TB OPTION CARD","short_desc":"General Electric 531X191RTBAFG4 Relay Terminal Board 531X Series","content":"

The General Electric 531X191RTBAFG4 is a relay terminal board from the 531X replacement board series. Most drives across the GE brand are able to accept this card and rely on its functions. This board serves a dual purpose when installed in a drive. Seven relays are offered through the card to command externally connected circuits. Users can also use the terminal board to gain access to system integrated coils and contacts.

Capabilities of the card are useful features for the installed drive. When operating, the board can execute control functions for any external circuits attached to the seven relays. 531X191RTBAFG4 also works to tabulate RTB points and relays contacts. A G4 revision, coils and contacts for this card are rated for this section of the series. Coils for the board rate at 24 VDC ± 10%, or 37 mA. Contacts in this card have a current rated at 2.4 A and voltages rated at 125 VAC or 28 VDC. These contacts also feature a 1 mA per 0.1 V rating.

Board integrity is dependent upon users following all installation parameters outlined by General Electric. Only allow qualified personnel to handle and install these boards. Damages may result if boards are handled, installed, or wired improperly. A wiring guide for this card can be found in the 531X191RTBAFG4 relay manual and datasheet. General Electric, the manufacturer, was the original provider of technical support for the board.

AX Control’s trusted sales team is available by phone or email to help with all of your automation needs. Please contact our office to receive prices and availabilities on this board, as well as all other parts and repairs.

","meta_title":"RTB TB OPTION CARD","meta_description":"RTB TB OPTION CARD","keywords":"RTB TB OPTION CARD","series_page_description":"RTB TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14238,"part_number":"531X191RTBAGG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"RTB TB OPTION CARD GE","short_desc":"General Electric 531X191RTBAGG1 Relay Terminal Board 531X Series","content":"

General Electric developed the 531X191RTBAGG1 as a relay terminal board for the 531X replacement board series. A number of drives from the GE family can accept this card and use its functions. When installed the card serves two purposes for the drive. It provides seven relays for wired connections to external circuits. The terminal board also provides users with access to the system’s integrated contacts and coils.

The card provides a number of useful features for the board’s installed drive. While the board is operating, 531X191RTBAGG1 can control external circuits fed to the seven relays by executing the control functions. Relay terminal cards like this can also tabulate RTB points and relay contacts. As G1 version of the board, contacts and coils for this board are rated for this specific part of the series. Coils for the board rate at 115 VAC ± 10% with a rated holding current of 9 mA. Contacts on the card have a current rated at 0.7 A DC and voltages rated at 105 VDC.

Protecting board integrity relies on users following the installation parameters defined by the manufacturer. Be sure to only allow trained and qualified personnel to install this board. Damages to the device can result if boards are improperly handled, installed, or wired. A wiring guide for this card is available in the 531X191RTBAGG1 relay terminal manual and datasheet. General Electric, the manufacturer of the device, originally provided technical support to the board.

Our knowledgeable and trusted sales team at AX Control’s available by phone or email to help with all of your automation needs. Please contact our office to receive prices and availabilities for the 531X191RTBAGG1 board or any other parts and repairs.

","meta_title":"RTB TB OPTION CARD GE","meta_description":"RTB TB OPTION CARD GE","keywords":"RTB TB OPTION CARD GE","series_page_description":"RTB TB OPTION CARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14239,"part_number":"531X191RTBAHG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":2,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC RTB TB OPTION CARD","short_desc":"General Electric 531X191RTBAHG1 Relay Terminal Board","content":"

General Electric developed the 531X191RTBAHG1 board as a relay terminal board. It was manufactured for the 531X series of replacement boards. A number of drives and exciters from the GE brand can have this card installed in its cabinet. When installed, this card provides the drive with seven additional relays that can be used to control external circuits. It also allows users access to contacts and coils using the card’s terminal board.

The contents of this relay terminal board include the relays and their associated circuitries. Relays feature a coil that has a voltage rating of 115 VAC with a frequency of 50/60 Hz. Holding currents for these rate at 9 mA. Each contact found on 531X191RTBAHG1 features a voltage of 0.7 amps DC or 105 VDC. Other features include the device’s ability to tabulate the relay contacts and RTB points. Indicator LEDs are found for each relay. When coils are energized on the device, the relays will illuminate, visually communicating this to the user. The board can also be used to control inputted external circuitries.

Any parameters regarding device installation should be met the user. Drive function depends on these being met, as they reduce the risk of damage to the device. 531X191RTBAHG1 should only be installed by qualified personnel who are trained to handle drive boards. Proper wiring is integral to board and device performance. Before installing, refer to the corresponding device manual and datasheet for a complete wiring guide. Technical support for this relay board was originally provided by the device manufacturer, General Electric.

Our staff at AX Control is happy to assist with all of your automation needs. Please contact our office by phone or email to speak with a member of our trusted sales team for pricing and other information on the 531X191RTBAHG1 board, as well as any other needed part or repair.

","meta_title":"GENERAL ELECTRIC RTB TB OPTION CARD","meta_description":"GENERAL ELECTRIC RTB TB OPTION CARD","keywords":"GENERAL ELECTRIC RTB TB OPTION CARD","series_page_description":"GENERAL ELECTRIC RTB TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":15045,"part_number":"531X191RTBAHG4","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE, RTB TB OPTION CARD","short_desc":"General Electric 531X191RTBAHG4 Relay Terminal Board 531X Series","content":"

General Electric designed the 531X191RTBAHG4 card as a relay terminal board. As a product from the 531X series of replacement drive and exciter boards, this card can be installed in a number of products. Drives across the GE line can have this card installed in its drive cabinet. This drive provides two services to its installed drive. Seven onboard relays are included as well as access to the coils and contacts via the card’s terminal board.

The 531X191RTBAHG4 relay terminal board provides its installed drive with a number of features. Each of the seven relays include a 24 VDC coil. Contacts within these relays rate at 37 mA with a 2.4 A current. Voltages for the card can rate at 125 VAC or 28 VDC with 1 mA per 0.1 V. The card also has the technology to tabulate RTB points and relay contacts. Each relay is outfitted with an LED indicator light. When relays are energized these will illuminate to visually indicate to the user that they are live. Any wired external circuits can be controlled using this board.

Installation parameters provided by the manufacturer should be met by the user. These are provided to help users reduce the risk of damage to the device or injury to the user. As it is a sensitive piece of circuitry, this card should only be installed by those personnel who are trained to handle drive components. A complete wiring guide for the card can be found in the device’s manual as well as it’s datasheet. General Electric originally provided technical support for the 531X191RTBAHG4 relay terminal board.

AX Control’s knowledgeable and trusted sales staff is always available to assist with all of your automation needs. Pricing and other information for the 531X191RTBAHG4 relay terminal card is available by contacting our office by phone or email

","meta_title":"GE, RTB TB OPTION CARD","meta_description":"GE, RTB TB OPTION CARD","keywords":"GE, RTB TB OPTION CARD","series_page_description":"GE, RTB TB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14240,"part_number":"531X191RTBAJG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC RTB OPTION BOARD","short_desc":"General Electric 531X191RTBAJG1 Relay Terminal Board 531X Series","content":"

General Electric manufactured the 531X191RTBAJG1 card to function as a relay terminal board. This card was developed as a member of the 531X family of replacement drive and exciter boards. Installing this card provides two services to the drive. External circuitries can be connected and controlled by one of the seven onboard relays. The device also allows users to access the coils and contacts using the terminal board found on the card.

When this card is installed, a number of board functions are provided to the drive. Within the board is a 115 VAC coil that features a frequency of 50/60 Hz. Contacts on the board are rated at 0.7 A DC or 105 VDC while produced hold currents rate at 9 mA. 531X191RTBAJG1 can also tabulate the RTB points and relay contacts for the board. Each relay features an integrated LED indicator light. These will illuminate when the relays is energized. The card can also be used to control external circuits fed to the board.

Installation parameters for the board are included with the device’s instruction manual. Following these set parameters will help to decrease the risk of damages to the board as well as injuries to the user. Do not permit untrained personnel to handle this board. Only qualified users should be allowed to handle and install the 531X191RTBAJG1 relay terminal board. Wiring instructions for the board can be found in the corresponding device manual and datasheet. Members of the 531X series were originally provided with technical support by the manufacturer, General Electric.

Our knowledgeable sales staff at AX Control is available to speak with you via phone or email about all of your automation needs. A member of our team can provide information on pricing and availability for the 531X191RTBAJG1 card, as well as any other part or repair.

","meta_title":"GENERAL ELECTRIC RTB OPTION BOARD","meta_description":"GENERAL ELECTRIC RTB OPTION BOARD","keywords":"GENERAL ELECTRIC RTB OPTION BOARD","series_page_description":"GENERAL ELECTRIC RTB OPTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":16446,"part_number":"531X191RTBAJG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC CARD DISPLAY","short_desc":"General Electric 531X191RTBAJG3 Relay Terminal Board 531X Series","content":"

The 531X191RTBAJG3 board was developed to operate as a relay terminal card. General Electric manufactured this product as a member of its 531X replacement drive board series. As a replacement board, this card can be installed in a number of older model GE brand drives and exciters. When installed, the card offers two services to its host drive. Included are seven onboard relay points as well as direct access to coils and contacts through the terminal board.

A number of features and components are included on the 531X191RTBAJG3 relay terminal card. Within each of the seven relays is a 115 VAC coil with a frequency of 50/60 Hz. Inrush currents for the card rate at 25 mA while holding currents rate at 14 mA. Each contact on the board rate at 2.4 Amps with an input of 125 VAC or 28 VDC. 1 mA per 0.1 V is produced as well. All relays on the board include integrated LED indicator lights. These will visually alert users when any of the relays are energized. External circuits wired to the board can also be controlled with this card.

Be sure to review the installation parameters outlined by the device’s manufacturer. Risks of device damages or user injuries are significantly lessened when these guidelines are followed. Since the card is a sensitive system only permit qualified personnel to handle and install this card. The device’s manual as well as its datasheet contains a comprehensive installation and wiring guide for the 531X191RTBAJG3 board. All members of the 531X series were originally provided with technical support by the manufacturer, General Electric.

Our trusted sales team at AX Control is always available to help with all of your automation needs. To receive pricing and other information for the 531X191RTBAJG3 relay board, or any other part or repair, please contact our office.

","meta_title":"GENERAL ELECTRIC CARD DISPLAY","meta_description":"GENERAL ELECTRIC CARD DISPLAY","keywords":"GENERAL ELECTRIC CARD DISPLAY","series_page_description":"GENERAL ELECTRIC CARD DISPLAY","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14241,"part_number":"531X191RTBAKG3","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LAN RTB OPTION CARD","short_desc":"General Electric 531X191RTBAKG3 Relay Terminal Board 531X Series","content":"

General Electric manufactured the 531X191RTBAKG3 card to operate as a relay terminal board. This device was developed as a member of the 531X series of replacement drive boards. Since it functions as a replacement board, a number of older model GE drives can have this card installed in its drive cabinet. The host drive is provided with two functions when this card is installed. The relay terminal board provides the drive with seven relay contacts on the board as well as direct access to the onboard contacts and coils.

A number of integrated features are found on this relay terminal board. Installing the 531X191RTBAKG3 board provides seven relay points to the installed drive. External circuits connected to the board can be controlled using these relays. It can also perform tabulations for the RTB points and relay contacts. All coil and contact ratings are developed for the G3 version of the board. Each relay contains a coil that rates at 115 VAC with a frequency rate of 50/60 Hz. Contacts within the relays have a 2.4 A rating, with rated voltages of 28 VDC or 125 VAC. The board caps inrush currents at 25 mA, while holding currents are rated at 14 mA.

Board integrity relies on users reviewing and following any provided installation parameters. As the device is a sensitive piece of equipment, 531X191RTBAKG3 should only be installed by personnel trained to handle drive boards. Be sure to carefully review all installation and wiring instructions. A comprehensive wiring guide for this relay terminal board is available in the device manual and datasheet. Technical support for this board was originally provided by the manufacturer, General Electric.

Our trusted sales team at AX Control is always available to speak with you about all of your automation needs. To receive pricing information on 531X191RTBAKG3, or any other needed part or repair, can be obtained by contacting our office by phone or email.

","meta_title":"LAN RTB OPTION CARD","meta_description":"LAN RTB OPTION CARD","keywords":"LAN RTB OPTION CARD","series_page_description":"LAN RTB OPTION CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14242,"part_number":"531X191RTBALG3","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE RTB TB OPTION CARD","short_desc":"General Electric 531X191RTBALG3 Relay Terminal Board 531X Series","content":"

The 531X191RTBALG3 card was manufactured by General Electric as a relay terminal board. As a member of GE’s 531X replacement drive board series, this card is outfitted to install into a number of drives and exciters across the brand. Two functions are furnished by the board for its installed host drive. Seven relay positions are available to the drive when this board is installed. The card also provides user access to the coils and contacts found on board.

Features of the relay terminal board are provided to the host drive. When installed, the terminal card offers seven relay positions for external hookups. Any attached circuits can be controlled using the 531X191RTBALG3 board. Tabulations for the RTB points and relay contacts can be calculated by the card. The card is a G3 revision of the board, offering a specific voltage and current rate different from other versions. Coils within each relay have a rating of 115 VAC, while contacts have a rating of 125 VAC or 28 VDC. Contacts also include a current rating 2.4 A, with board inrush currents of 25 mA and holding currents of 14 mA.

Be sure to review all provided installation parameters before beginning to install this board. To protect the sensitive components of the board, only permit trained personnel to handle and install the 531X191RTBALG3 card. All wiring instructions should be thoroughly reviewed before beginning device installation. The corresponding device manual and datasheet contains a comprehensive wiring and installation guide. General Electric, the device’s manufacturer, was the original provider of technical support for this relay terminal board.

AX Control’s trusted and knowledgeable sales staff is happy to help with all of your automation needs. Current prices for this relay terminal card is available by contacting our team by phone or email.

","meta_title":"GE RTB TB OPTION CARD","meta_description":"GE RTB TB OPTION CARD","keywords":"GE RTB TB OPTION CARD","series_page_description":"GE RTB TB OPTION CARD","quote_description":null,"inventory_notes":"new surplus factory package","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":16447,"part_number":"531X191RTBALG4","revision_type_id":1,"series_id":53,"stock_level_id":9,"repair_time_id":1,"stock_level_text":"Call For Availability","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC OPTION BOARD","short_desc":"General Electric 531X191RTBALG4 Relay Terminal Board 531X Series","content":"

General Electric developed their 531X191RTBALG4 card as a relay terminal board. Specifically, this device was placed into the 531X replacement drive board series. Installing this card provides two features to the host drive. It offers seven relay points that can command and execute externally wired circuits. It also allows the the user to access the integrated coils and contacts using the terminal board.

531X191RTBALG4 provides the host drive with seven additional relay points. These relays can be used to execute functions on external circuitries wired to the board. Both RTB points and relay contacts can be tabulated with this card. A G4 version of the board, relays in the card feature a 24 VDC rated coil, or 37 mA. Contacts within the relays have a rated current of 2.4A and rated voltages at either 125 VAC or 28 VDC.

Review the installation parameters before beginning to install the 531X191RTBALG4 relay terminal board. Following these provided instructions helps to reduce the risk of damages to the board or drive. To ensure proper installation, only allow qualified personnel to handle this card. All installation and wiring instructions are available in the corresponding device manual and datasheet. General Electric, the board’s manufacturer, originally provided technical support for this card.

The trusted sales staff at AX Control is ready to help with all of your automation needs. To receive pricing and other information for the 531X191RTBALG4 relay terminal, along with any other part or repair, please contact our office by phone or email.

","meta_title":"GENERAL ELECTRIC OPTION BOARD","meta_description":"GENERAL ELECTRIC OPTION BOARD","keywords":"GENERAL ELECTRIC OPTION BOARD","series_page_description":"GENERAL ELECTRIC OPTION BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14243,"part_number":"531X196DFAACG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE DIGITAL FIELD AUX BOARD","short_desc":"The 531X196DFAACG1 is a GE DIGITAL FIELD AUXILIARY BOARD","content":"

The 531X196DFAACG1 is a PCB board component created by GE as part of the 531x series of boards. Rather than being attached to a particular drive series, the 531x series of PCBs may be used in some general purpose drive systems manufactured by General Electric. This includes the DC-300 drive. Your user guide or manual will help determine compatibility.

The 531X196DFAACG1 functions as a Digital Field Auxiliary board. The PCB is populated by a number of components, including at its center a transformer component with four surface wires. These wires (two red and two white,) connect to the board at points labeled R1, R2, W1, and W2. The board uses additional surface wiring to connect a capacitor and a metal film resistor, both located in the upper left corner.

The 531X196DFAACG1 is drilled in each corner of the board for mounting. It has a single sixteen-pin header connector, along with five stab-on connectors. The stab-on connectors are located in a single line parallel to the right edge. They are labeled VG(red,) VC (white,) VM (blue,) IP (red,) and IN (white.) The board is marked with the code F31X196DFAAAG1.

Additional components on the 531X196DFAACG1’s surface include two potentiometers, four jumper switches, ceramic and electrolytic capacitors, metal film resistors, and four integrated circuits, including high-performance analog comparators, high-performance analog power bipolar transistors, and high-performance analog operational amplifiers. If more information is needed on components or the function, installation, or use of the board, please refer to manufacturer manuals, data sheets or user guides. These publications will also provide recommended handling procedures.

","meta_title":"GE DIGITAL FIELD AUX BOARD","meta_description":"GE DIGITAL FIELD AUX BOARD","keywords":"GE DIGITAL FIELD AUX BOARD","series_page_description":"GE DIGITAL FIELD AUX BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-21 08:22:55","prod_pdf":[]},{"id":14244,"part_number":"531X196DFAADG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"DIGITAL FIELD AUX BOARD GE","short_desc":"The 531X196DFAADG1 is a Digital Field Auxiliary Board","content":"

531X196DFAADG1--Digital Field Auxiliary Board

The 531X196DFAADG1 is a circuit board component manufactured by GE. The PCB is designed to fit into GE’s general purpose drives like the AC-300 and DC-300. These drives were initially designed as flexible, dynamic systems capable of use within industrial settings. Many of these systems are now considered obsolete.

The 531X196DFAADG1 functions as a Digital Field Auxiliary Board. It has four drilled holes for mounting. The board is dense with components. This includes five stab-on connectors and an 18-pin header connector. These connectors are used to communicate with off-board components and with other boards.

The 531X196DFAADG1 has a single transformer component located in the center of the board. This component has four surface wires (two white and two red) that run from the top of the transformer to the board surface. There is an additional surface wire used elsewhere on the board.

The 531X196DFAADG1 has four integrated circuits. These circuits are marked with their manufacturer numbers which allow for quick identification. The board also has four jumper switches. Other components on the board include metal film resistors and capacitors made from varying materials.

More information on the board may be found through publications from General Electric like user guides, drive manuals, or data sheets. These publications will also give more information relating to maintenance and installation. It is recommended that only qualified personnel install or maintain this equipment.

Our facilities are located just south of Raleigh, North Carolina. We will be happy to quote shipping costs to your facility upon request.

","meta_title":"DIGITAL FIELD AUX BOARD GE","meta_description":"DIGITAL FIELD AUX BOARD GE","keywords":"DIGITAL FIELD AUX BOARD GE","series_page_description":"DIGITAL FIELD AUX BOARD GE","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-14 10:11:39","prod_pdf":[]},{"id":14245,"part_number":"531X197SSAACG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE AMPLIFIER CARD","short_desc":null,"content":"

The 531X197SSAACG1 is a very small Amplifier Card by General Electric. The 531X197SSAACG1 is a tiny circuit board. The 531X197SSAACG1 has a gray plastic bar. This bard has eight gold screws on the top to secure wires in place. The ports are labeled one, two, three, four, five, six, seven, and eight, along the bottom. The 531X197SSAACG1 has multiple resistors used to dissipate energy. Along with resistors the 531X197SSAACG1 uses capacitors to store energy that can be used later. The 531X197SSAACG1 uses a few diodes to direct the energy flow. The 531X197SSAACG1 has two transistors (one small and silver the other medium sized and black). The 531X197SSAACG1 stores the information for the circuit board to function in microchips (chips, integrated circuits, IC). The 531X197SSAACG1 also has a large gold bracket that is a male terminal point to connect with other circuit boards. Please refer to General Electric’s data sheets and manuals for instructions and safety procedures.

For more details or a quote please email or call AX Control.

","meta_title":"GE AMPLIFIER CARD","meta_description":"GE AMPLIFIER CARD","keywords":"GE AMPLIFIER CARD","series_page_description":"GE AMPLIFIER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-14 14:52:55","prod_pdf":[]},{"id":16448,"part_number":"531X199SPTACG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC COMMUTATION PULSE TRANSFORMER CARD","short_desc":null,"content":"

The 531X199SPTACG1 is manufactured by General Electric as a Commutation Pulse Transformer Card. The 531X199SPTACG1 is a long card where the parts are placed toward the ends and around the edges, leaving the middle mostly empty. The 531X199SPTACG1 has twelve large dark colored resistors to the left side. There are other resistors around the circuit board as well. The resistors are used to dissipate energy that the circuit board no longer needs. The 531X199SPTACG1 has multiple condensers also called capacitors in American based instruction manuals. The condensers have the ability to create an electrical field as energy flows through it. As the energy passes through it the condensers take some of the energy and store it in the electrical field. The 531X199SPTACG1 has six transformers. These transformers transfer electrical energy between multiple circuits. The 531X199SPTACG1 has a small microchip. This microchip holds the information for the 531X199SPTACG1 to operate. The 531X199SPTACG1 has six small white male connectors and two large black male connectors. These connectors are used to attach and connect with other circuit boards. The 531X199SPTACG1 has two metal clasps near the transformers. The 531X199SPTACG1 has four connection points to attach into the rest of the system. The 531X199SPTACG1 has a small chart and labels in the center of the circuit board. The 531X199SPTACG1 is now considered an outdated circuit board and is no longer in production. For more information, General Electric has released multiple data sheets and instructional manuals.

If you would like to have additional information please call or email AX Control.

","meta_title":"GENERAL ELECTRIC COMMUTATION PULSE TRANSFORMER CARD","meta_description":"GENERAL ELECTRIC COMMUTATION PULSE TRANSFORMER CARD","keywords":"GENERAL ELECTRIC COMMUTATION PULSE TRANSFORMER CARD","series_page_description":"GENERAL ELECTRIC COMMUTATION PULSE TRANSFORMER CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-17 09:50:47","prod_pdf":[]},{"id":14246,"part_number":"531X199SPTADG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":1,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"COMMUNICATION PULSE TRANSFORMER GE BOARD","short_desc":"The 531X199SPTADG1 is a Communication Pulse Transformer Board","content":"

531X199SPTADG1--Communication Pulse Transformer Board

The 531X199SPTADG1 is a board component fabricated by General Electric to fit into their general purpose drive systems like the DC-300 drive.

The 531X199SPTADG1 is a Communication Pulse Transformer Board. It is a long, rectangular board that has only a few components on its surface. It is drilled in each corner for mounting and has several other drill holes. It is marked with codes like 002/1, FR01/0, 0390, VA-4, and its alternate board number of F31x199SPTABG1. The center of the board includes a graph relating to the board jumpers. The board has three jumpers.

The 531X199SPTADG1 has six transformers placed in a single line along the top edge of the board. These are placed on the board as three/one/two transformers. Each transformer has a two-pin header connector, a ceramic capacitor, and three resistors (two metal film and one CCR) related to it. There are four stab-on connectors located between the single transformer and the set of two transformers.

Other components on the 531X199SPTADG1 include six additional stab-on connectors located on the left edge, next to a field of carbon composite resistors. There are twelve CCRs in this field. There is also a field of twelve metal film resistors. These two fields are separated by the three previously mentioned jumpers. There are two male vertical pin cable connectors on the right edge of the board, along with more metal film resistors, ceramic capacitors, a single integrated circuit, one terminal pin that is marked +24V, and one high-voltage capacitor. More information on this board may be accessed through data sheets, manuals, or user guides.

","meta_title":"COMMUNICATION PULSE TRANSFORMER GE BOARD","meta_description":"COMMUNICATION PULSE TRANSFORMER GE BOARD","keywords":"COMMUNICATION PULSE TRANSFORMER GE BOARD","series_page_description":"COMMUNICATION PULSE TRANSFORMER GE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-13 09:39:46","prod_pdf":[]},{"id":14247,"part_number":"531X207LCSACG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"Current Source Module","short_desc":"General Electric 531X207LCSACG1 LAN Current Source Board LCS 531X Board Series","content":"

The General Electric 531X207LCSACG1 is a local area network (LAN) current source board. This optional card is a member of the 531X series of replacement and optional boards. A number of drives and exciters from the GE brand can accept and use this LAN current source board. The card draws its source from a fuse protected 115 VAC input power. When powered on, a power supply rating of either 5 VDC or 15 VDC is provided by the board as well as a voltage limited 0.3 A current source.

When installed, 531X207LCSACG1 provides the LAN board of its drive with a current source. Both 5 VDC and 15 VDC can be supplied via this board, depending on user selection. A jumper (JP1) found on board allows users to select the supply, with position 1.2 allowing 5 VDC and 2.3 allowing 15 VDC. An onboard potentiometer (P1) allows users to adjust output voltages produced by these supplies. The card also includes a protected fuse and a terminal board. Inputs to the board and outputs sent from the board are all carried through the 12-point terminal board.

Any provided installation parameters should be met to protect the integrity of the board. Only qualified personnel who are trained and experienced in handling drive boards should be permitted to install 531X207LCSACG1. For directions on how to properly wire the LAN current source board, please use the illustrated instructions found in the device’s datasheet and manual. Boards from the 531X series were originally provided with technical support by General Electric, the manufacturer.

The team at AX Control is available to assist with all of your automation parts and repairs. Prices for this 531X207LCSACG1 board, as well as all other parts and repairs is available by contacting our sales staff by phone or email.

","meta_title":"Current Source Module","meta_description":"Current Source Module","keywords":"Current Source Module","series_page_description":"Current Source Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[{"id":1842,"product_id":14247,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14248,"part_number":"531X207LCSAEG1","revision_type_id":1,"series_id":53,"stock_level_id":1,"repair_time_id":1,"stock_level_text":"In Stock Ships Today","repair_time_text":"24 Hours","weight":null,"recond_stock":1,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LAN CURRENT SOURCE BOARD","short_desc":"General Electric 531X207LCSAEG1 LAN Current Source Board LCS 531X Board Series","content":"

531X207LCSAEG1 is a local area network (LAN) current source board developed for General Electric’s 531X series of replacement boards. As a replacement board, this card can be used across a range of GE brand drives and exciters. When installed in a drive, this current source board provides power supplies rated at 5 VDC and 15 VDC with a 0.3 A voltage limited current source for the drive’s LAN. All sourced power to the card is drawn from a 115 VAC fuse protected input power.

LAN operations of the drive are dependent upon this board functioning properly. 531X207LCSAEG1 includes a number of configurable options that allow users to apply this board to a number of tasks. The only jumper found on the board, labelled JP1, provides users with the ability to select between the 5 VDC and 15 VDC supply. Position 1.2 allows for the 5 VDC supply, while 2.3 provides the 15 VDC supply. Output voltages produced by these are also configurable using the one integrated potentiometer. The 12 point terminal attached to the card works as the interfacing point, sending and receiving voltage signals.

Any installation parameters provided with the board should be met. Following all guidelines from the manufacturer will ensure the integrity of the 531X207LCSAEG1 board as well as the overall drive system. Only permit qualified personnel trained in handling drive components to handle or install this board. Refer to the device’s datasheet and manual for a complete installation and wiring guide. All members of the 531X family of boards were provided with technical support by the original manufacturer, General Electric.

Our experienced sales team at AX Control is more than happy to assist with all of your automation needs. Current prices on 531X207LCSAEG1, as well as any other part and repair, can be obtained by contacting our staff by phone or email.

","meta_title":"LAN CURRENT SOURCE BOARD","meta_description":"LAN CURRENT SOURCE BOARD","keywords":"LAN CURRENT SOURCE BOARD","series_page_description":"LAN CURRENT SOURCE BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14249,"part_number":"531X207LCSAEH1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LAN CURRENT SOURCE PCB","short_desc":"General Electric 531X207LCSAEH1 LAN Current Source Board LCS 531X Board Series","content":"

General Electric developed the 531X207LCSAEH1 LAN (local area network) current source board for the 531X series of replacement boards. A range of GE drives and exciters are capable of accepting and using this card. LAN systems in the drive receive power supplies rated at either 5 VDC or 15 VDC from this board. A voltage limited 0.3A current source is also provided by the card. All supplies to the board are drawn from a 115 VDC fuse protected input source.

Configurable options found onboard provide users with flexibility in installing this card. As the board is capable of producing two supplies, users are able to select which is required. An integrated jumper provides position 1.2 to select 5 VDC, while 2.3 allows for 15 VDC selection. Voltages outputted by the board can also be adjusted to fit with the selected supply. An onboard potentiometer is used to select the appropriate output voltage needed. All inputted and outputted signals through the card are received and sent by the 12 point terminal board found on the card.

All manufacturer produced installation parameters regarding the LAN current source board should be followed. Meeting these will protect 531X207LCSAEH1 as well as its drive from unintentional accidents or damages. Do not permit any untrained personnel to handle or install this board. All wiring and installation instructions are available in both the device manual as well as the datasheet. General Electric originally provided the entire 531X series, including this board, with technical support.

AX Control’s friendly and knowledgeable sales staff is ready to help with all of your automation needs. To obtain prices on the 531X207LCSAEH1 board, or any other part and repair, please contact our team by phone or email.

","meta_title":"LAN CURRENT SOURCE PCB","meta_description":"LAN CURRENT SOURCE PCB","keywords":"LAN CURRENT SOURCE PCB","series_page_description":"LAN CURRENT SOURCE PCB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14250,"part_number":"531X207LCSAFG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC LAN CURRENT SOURCE CARD","short_desc":"General Electric 531X207LCSAFG1 LAN Current Source Board LCS 531X Board Series","content":"

The 531X207LCSAFG1 is a local area network (LAN) current source board. This unit was developed by General Electric for their 531X series of boards. The card can be accepted by a wide range of GE drives and exciters. When installed, the card provides the drive’s LAN systems with power supplies rated at either 5 VDC or 15 VDC. Also provided by the board is a voltage limited current source rated at 0.3 A. A 115 VDC fuse protected input provides sourced supplies to the board.

System flexibility is a major design feature of the 531X207LCSAFG1. Users are able to select between two LAN power supplies, depending on individual load requirements. To select between the power supplies, moving the board’s jumper to position 1.2 provides 5 VDC, while 2.3 provides 15 VDC. Users can also select the voltage output created by the board to adjust to the selected inputs. Output voltage can be selected using the potentiometer available on board. All signals sent to and from the card are relayed through the 12 point terminal integrated into the card.

Device preservation is dependent upon users following all outline installation parameters provided with the board. Drive function will benefit by adhering to these guidelines. Installation of 531X207LCSAFG1 should only be performed by qualified personnel trained to handle these sensitive boards. Please refer to the device’s manual and its datasheet for a complete guide to wiring and installing the board. All members of the 531X board series were originally provided with technical support by the manufacturer, General Electric.

Our knowledgeable staff at AX Control is ready to assist with all of your automation needs. Prices for the LAN current source board, or any other part, can be obtained by contacting our sales team by phone or email.

","meta_title":"GENERAL ELECTRIC LAN CURRENT SOURCE CARD","meta_description":"GENERAL ELECTRIC LAN CURRENT SOURCE CARD","keywords":"GENERAL ELECTRIC LAN CURRENT SOURCE CARD","series_page_description":"GENERAL ELECTRIC LAN CURRENT SOURCE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14251,"part_number":"531X207LCSAHG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE LAN POWER SUPPLY BOARD","short_desc":"General Electric 531X207LCSAHG1 LAN Current Source Board 531X Series","content":"

General Electric developed the 531X207LCSAHG1 board as a local area network (LAN) current source board. This card was designed for the 531X series of replacement boards. Members of this board series can be installed in a number of drives and exciters across the GE family. When installed, this card provides voltages rated at either 5 VDC or 15 VDC, as well as a 0.3 A voltage limited current source. All inputs sourced to the board are fed through a fuse protected 115 VAC input power.

The board provides the power supply necessary for the LAN board to operate. Two voltage options are available for users to choose from. An integrated jumper (J1) allows the user to select the provided voltage, either 5 or 15 VDC. Output voltages produced by the sources can be adjusted to match the input selected. A potentiometer found on the 531X207LCSAHG1 card allows for this adjustment. A terminal board as well as a protected fuse are also featured on this card. The 12-point terminal board acts as the medium for all inputs and outputs sent through the board.

All provided installation parameters should be reviewed before installing the board. When these are met, the risk of damages to the board are significantly reduced. As it features electric circuits, the LAN current source board should only be handled by qualified personnel. Wiring instructions for the 531X207LCSAHG1 board can be found in the series manual as well as the device datasheet. Technical support for replacement boards from the 531X series was originally provided by the manufacturer, General Electric.

Our trusted sales staff at AX Control is ready to speak with you via phone or email about all of your automation needs. Our team can provide pricing information for the 531X207LCSAHG1 board, as well as any other needed part or repair.

","meta_title":"GE LAN POWER SUPPLY BOARD","meta_description":"GE LAN POWER SUPPLY BOARD","keywords":"GE LAN POWER SUPPLY BOARD","series_page_description":"GE LAN POWER SUPPLY BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14252,"part_number":"531X207LCSALG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"LAN CURRENT SOURCE PCB","short_desc":"General Electric 531X207LCSALG1 LAN Current Source Board 531X Series","content":"

The 531X207LCSALG1 card is a local area network (LAN) current source board. General Electric developed the card for the 531X series of replacement and optional drive boards. As this is a standard drive board, this card can be installed into an array of drives and exciters manufactured across the GE brand. Power supplies rated at 5 VDC or 15 VDC is provided by this card when installed. Sourced inputs fed to the board are drawn from a 115 VAC fuse protected input power.

When installed, this card provides the power supply required by the drive’s LAN board. Users can select between the two voltages (5 and 15 VDC) using the board’s integrated jumper (J1). As these signals can be adjusted, so can the output voltages associated with them. 531X207LCSALG1 includes an onboard potentiometer that allows for output adjustments. The card also includes a protected fuse and a terminal board. The terminal board is a 12-point model that relays all signals sent to and from the board.

Be sure to review all provided installation parameters before handling or installing the board. The risk of damages to the device is lessened when these are met. Since the 531X207LCSALG1 board features electrical circuits, only permit trained personnel to handle and install the card. For wiring and installation instructions, please refer to the device’s manual and datasheet. Members of the 531X series were originally provided with technical support by the manufacturer, General Electric.

AX Control’s trusted and trained sales team is available to speak with you over phone or email about all of your automation needs. Our staff can provide pricing information about the 531X207LCSALG1 LAN source board, or any other part or repair.

","meta_title":"LAN CURRENT SOURCE PCB","meta_description":"LAN CURRENT SOURCE PCB","keywords":"LAN CURRENT SOURCE PCB","series_page_description":"LAN CURRENT SOURCE PCB","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":16095,"part_number":"531X207LCSAMG1","revision_type_id":1,"series_id":53,"stock_level_id":8,"repair_time_id":1,"stock_level_text":"Call","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE PC BOARD LAN CURRENT SOURCE CARD","short_desc":"General Electric 531X207LCSAMG1 LAN Current Source Board 531X Series","content":"

The 531X207LCSAMG1 board was developed as a local area network (LAN) current source board. The manufacturer, General Electric, designed this card for the 531X replacement series of drive boards. As it is a standard component of the drive cabinet, this card can be installed into a number of machines across GE’s brand of drives and exciters. This current source board provides rated power supplies of 5 VDC as well as 15 VDC to the LAN board when installed. A fuse protected 115 VAC input power source provides necessary electricity to the board.

Power supplies required by the LAN communication board is provided by this card. A jumper (J1) found on the board allows users to select between the two provided power supplies. Should these levels be adjusted, users must then adjust the output accordingly. A potentiometer found on the card allows for the output configuration. 531X207LCSAMG1 also features a protected fuse as well as a 12-point terminal board. The terminal board relays all signals sent to and from the card.

Necessary installation parameters should be reviewed before board installation occurs. Meeting the provided parameters will help to reduce any risk of damage to the board, drive, or user. Included on the 531X207LCSAMG1 board are electrical circuits, so only allow trained users to install this card. The series manual as well as the device datasheet contains a comprehensive installation and wiring guide. Technical support for the entire 531X series was originally provided by General Electric.

Our trusted team at AX Control is happy to speak with you via phone or email about all of your automation needs. Information and pricing for the 531X207LCSAMG1 board, as well as any other part or repair, can be obtained by speaking with a member of our knowledgeable sales staff.

","meta_title":"GE PC BOARD LAN CURRENT SOURCE CARD","meta_description":"GE PC BOARD LAN CURRENT SOURCE CARD","keywords":"GE, PC BOARD, LAN CURRENT SOURCE CARD","series_page_description":"GE PC BOARD LAN CURRENT SOURCE CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14253,"part_number":"531X210DMCACM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MCC PCM Circuit Board Control Module","short_desc":"The 531X210DMCACM1 is a GE Drop-in Main Control Card","content":"

531X210DMCACM1--Drop In Main Control Card

The 531X210DMCACM1 is a PCB board component from General Electric for use within several systems, including the AC or DC 300 drives. While these drives are now typically considered obsolete, they were originally considered flexible and dynamic systems for use in industrial settings. The board is marked on two edges to allow for alignment and is drilled in each corner.

The 531X210DMCACM1 is a Drop-In Main Control Card. This board has a single push button switch component. It has two LED indicators. Both indicators are red. It also has four cable connectors. This includes three vertical pin male cable connectors and one female thirty-seven pin cable connector, all located along one line close to the bottom edge of the board. The board also has several vertical pin connectors marked LANPL and stab-on connectors.

The 531X210DMCACM1 has a single heat sink component. It has over sixteen resistor network arrays, over forty-five integrated circuits, and two fuses. Integrated circuits include oscillating chips and eeproms. Resistor network arrays primarily act as a voltage divider.

The 531X210DMCACM1 is populated with diodes, capacitors, and resistors. Capacitors are made from various materials, including ceramic, polyester vinyl, and other materials. The board has six large aluminum electrolytic capacitors. Resistors on the board are both metal film and carbon composite.

More information on the 531X210DMCACM1 may be found through GE publications like series user guides, datasheets, or manuals. All technical support for the 531x board series was originally provided by General Electric.

","meta_title":"MCC PCM Circuit Board Control Module","meta_description":"MCC PCM Circuit Board Control Module","keywords":"MCC PCM Circuit Board Control Module","series_page_description":"MCC PCM Circuit Board Control Module","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-03-18 13:49:28","prod_pdf":[{"id":1841,"product_id":14253,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14254,"part_number":"531X210DMCAEM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE CONTROL BOARD","short_desc":null,"content":"

The 531X210DMCAEM1 is a large circuit board produced by General Electric. The 531X210DMCAEM1 is a large circuit board. The 531X210DMCAEM1 features fifty microchips that range in size from tiny to large. These microchips are used to hold the data that informs the circuit board what to do and how to do it. In manuals, the 531X210DMCAEM1 may also be referred to by other names such as a chip, integrated circuit, or IC for short. The 531X210DMCAEM1 has six large tower capacitors as well as many other smaller capacitors that are used to store energy in a self-created electrical field. The 531X210DMCAEM1 has many diodes to conduct the flow of energy. The 531X210DMCAEM1 has one small glass fuse located next to the tower condensers. The 531X210DMCAEM1 has twenty-two sets of jumper ports. Each jumper port has two settings. The 531X210DMCAEM1 has two light emitting diodes (LEDs). The 531X210DMCAEM1 has two crystal oscillators. The crystal oscillators create a high and precise frequency. The 531X210DMCAEM1 has one edge of the circuit board labeled one, two, three, four, five, six, seven, eight, and nine. The other edge is labeled A, B, C, D, E, F, G and H. The 531X210DMCAEM1 has three male connectors and one female connector. The 531X210DMCAEM1 also has a black metal bracket that has slits in the edges. The 531X210DMCAEM1 is no longer in production and is considered obsolete. However, General Electric does provide instruction manuals and data sheets if you would like information on the circuit boards specifications.

Please Call or email AX Control today.

","meta_title":"GE CONTROL BOARD","meta_description":"GE CONTROL BOARD","keywords":"GE CONTROL BOARD","series_page_description":"GE CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-14 16:04:32","prod_pdf":[]},{"id":14255,"part_number":"531X210DMCAGM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MAIN CONTROL GE BOARD 006/03","short_desc":null,"content":"

The 531X210DMCAGM1 is a circuit board fabricated by General Electric. The 531X210DMCAGM1 is a large circuit board. The 531X210DMCAGM1 is no longer being manufactured and is deemed obsolete. General Electric supplies various data sheets and instruction manuals that go over the circuit board in detail. The 531X210DMCAGM1 has one edge of the circuit board labeled one, two, three, four, five, six, seven, eight, and nine. The other edge is labeled A, B, C, D, E, F, G, and H. The 531X210DMCAGM1 has six big tower condensers as well as many other various sized condensers that are used to stockpile energy in a self-created electrical field. The 531X210DMCAGM1 has numerous diodes to manage the flow of energy. The 531X210DMCAGM1 has one glass fuse positioned near the cluster of tower condensers. The 531X210DMCAGM1 has twenty-two sets of jumper ports. Each jumper port has two settings. The 531X210DMCAGM1 has two LEDs (light emitting diodes). The 531X210DMCAGM1 has two small silver crystal oscillators. The crystal oscillators produce a high pitch and precise frequency. The 531X210DMCAGM1 has three masculine connectors and one feminine connector. The 531X210DMCAGM1 contains fifty chips that range in size from minute too big. These chips are used to store the information that informs the circuit board what it is meant to do, along with how and when to do it. In manuals the 531X210DMCAGM1 may also be referred to by other names such as microchip, integrated circuit, or IC for short. The 531X210DMCAGM1 also has a black metal support that has slits in the sides.

Please Call or email AX Control today.

","meta_title":"MAIN CONTROL GE BOARD 006/05","meta_description":"MAIN CONTROL GE BOARD 006/06","keywords":"MAIN CONTROL GE BOARD 006/07","series_page_description":"MAIN CONTROL GE BOARD 006/03","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-14 16:28:28","prod_pdf":[]},{"id":14256,"part_number":"531X210DMCALM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GENERAL ELECTRIC CONTROL CARD","short_desc":"","content":null,"meta_title":"GENERAL ELECTRIC CONTROL CARD","meta_description":"GENERAL ELECTRIC CONTROL CARD","keywords":"GENERAL ELECTRIC CONTROL CARD","series_page_description":"GENERAL ELECTRIC CONTROL CARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":null,"prod_pdf":[]},{"id":14257,"part_number":"531X210DMCAMM1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"MAIN CONTROL BOARD","short_desc":null,"content":"

The 531X210DMCAMM1 is a PC board assembly. The 531X210DMCAMM1 has one female port and three black male ports and a small white male port. The 531X210DMCAMM1 has two crystal oscillators used to create precise frequencies. The 531X210DMCAMM1 has two raised red LEDs (light emitting diodes). The 531X210DMCAMM1 has over twenty jumpers. These jumpers have at least two positions that they can be moved to. Moving the jumpers to these positions act as a switched to turn circuits on and off and direct the flow of energy. The 531X210DMCAMM1 uses several different types and styles of condensers also called capacitors. They range from tiny beads, large cylindrical style, thin bar style, and large tall cylinders that stand on one end. These condensers are used to create small individual electrical fields. These electrical fields are used to store electrical current for the circuit board to pull from later. The 531X210DMCAMM1 has three fuses, that are placed around the tower like condensers. The 531X210DMCAMM1 has one small button on the circuit board. The 531X210DMCAMM1 has multiple diodes used to control the flow of energy. If the 531X210DMCAMM1 needs to remove energy it uses the multiple resistors across the circuit board. The resistors turn energy into heat and allow it to dissipate. The 531X210DMCAMM1 uses forty-seven integrated circuits and has a place to add two more. The integrated circuits store the information for the circuit board to perform its duties.

The 531X210DMCAMM1 has multiple connection points to attach the circuit board to the system.

Please call or email the staff at AX Control.

","meta_title":"MAIN CONTROL BOARD","meta_description":"MAIN CONTROL BOARD","keywords":"MAIN CONTROL BOARD","series_page_description":"MAIN CONTROL BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-17 10:52:25","prod_pdf":[]},{"id":14258,"part_number":"531X210DMCAMMA","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE Fanuc IOS Board","short_desc":null,"content":"

The 531X210DMCAMMA is a PC board assembly created by General Electric. The 531X210DMCAMMA has several connection points to attach the circuit board to the system. The 531X210DMCAMMA has numerous diodes used to curb the flow of energy. The 531X210DMCAMMA has a small white masculine port, three black masculine ports, and one feminine port. If the 531X210DMCAMMA needs to eliminate energy it uses the various resistors around the circuit board. The resistors change energy into heat and allow it to dissipate. The 531X210DMCAMMA has around twenty jumpers. These jumpers have at least two stances that they can be moved to. Moving the jumpers to these stances act as a switched to turn circuits on and off and direct the flow of energy. The 531X210DMCAMMA uses numerous diverse types and styles of capacitors also called condensers. They range from large tall cylinders that stand on one end, tiny beads, thin bar style, and a large cylindrical style. These capacitors are used to create separate electrical fields. These electrical fields are used to stock electrical current for the circuit board to pull from later. The 531X210DMCAMMA has three fuses, that are placed around the tower like condensers. The 531X210DMCAMMA has one small button on the circuit board. The 531X210DMCAMMA has two raised red LEDs (light emitting diodes). The 531X210DMCAMMA has two crystal oscillators used to produce exact frequencies. The 531X210DMCAMMA uses forty-seven microchips and has a place to add two more. The microchips store the information for the circuit board to perform its duties.

Please call or email the staff at AX Control.

","meta_title":"GE Fanuc IOS Board","meta_description":"GE Fanuc IOS Board","keywords":"GE Fanuc IOS Board","series_page_description":"GE Fanuc IOS Board","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2018-12-17 11:15:25","prod_pdf":[{"id":1840,"product_id":14258,"pdf_id":17755,"is_active":1,"created_at":null,"updated_at":null,"pdf":{"id":17755,"pdf_type_id":1,"file_name":"dc300.pdf","title_tag":"Control Board Module | PDF","alt_tag":"Control Board Module | PDF","created_at":null,"updated_at":null}}]},{"id":14259,"part_number":"531X210DMCANN1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE SIGNAL PROCESS BOARD","short_desc":"The 531X210DMCANN1 is a Signal Process Board","content":"

The 531X210DMCANN1 is a board component manufactured by GE for use within general purpose drive systems, including the DC-300 drive. The 531x series of boards can be used across a wide variety of platforms; please check your user guide or manual for compatibility.

The 531X210DMCANN1 functions as a Signal Process Board. The PCB is heavily populated by components, including capacitors, diodes, and resistors. Capacitors include electrolytic capacitors, plastic film, and ceramic capacitors. Resistors tend to be made of metal film. The board also utilizes a number of resistor network arrays. Diodes include two LED (light emitting diodes.) These are placed near the center of the board and are offset from each other by several centimeters.

The 531X210DMCANN1 has several header connectors. It has three male vertical pin cable connectors that are placed along the bottom edge of the board. There is also a single female connector located in this same area. The board has over a dozen jumper switches, spare PTH, stab-on connectors, and a single switch component. It also has multiple fuses located on the board’s surface. A single heat sink is located in the upper left quadrant. The board is populated with over thirty-five integrated circuits, including oscillating chips. More information about the board, its components, function, operation, installation, and handling, may be found through manufacturer publications like user guides, data sheets, or manuals that reference the board part number.

AX Control takes pride in meeting your expectations for quick service and properly sourced parts. We package every static-sensitive board within an anti-static wrap before boxing it for shipment. Most of our in-stock products will be shipped the same day you place your order.

","meta_title":"GE SIGNAL PROCESS BOARD","meta_description":"GE SIGNAL PROCESS BOARD","keywords":"GE SIGNAL PROCESS BOARD","series_page_description":"GE SIGNAL PROCESS BOARD","quote_description":null,"inventory_notes":"","cross_reference":"","created_at":null,"updated_at":"2019-02-22 08:23:55","prod_pdf":[]},{"id":14260,"part_number":"531X211KLDAAG1","revision_type_id":1,"series_id":53,"stock_level_id":4,"repair_time_id":1,"stock_level_text":"In Stock Ships 3-5 Days","repair_time_text":"24 Hours","weight":null,"recond_stock":0,"new_stock":0,"recond_price":"0.00","new_price":"0.00","max_oversell":0,"description":"GE LED Display Module","short_desc":null,"content":"

The 531X211KLDAAG1 is a display card. The 531X211KLDAAG1 was made by General Electric. The 531X211KLDAAG1 has seven long faceplates. The faceplates are attached to the circuit board with ten screws total. The six that are next to each other share a screw. The faceplates have ten areas for a number to be placed. The 531X211KLDAAG1 has thirty-two raised red light emitting diodes or LEDs for short. These light emitting diodes and the faceplates work together to alert the engineer or the workers of what is going on within the system. The 531X211KLDAAG1 has a few diodes that control energy flow. The 531X211KLDAAG1 contains multiple resistors. These resistors are used to disperse any unneeded energy. Should the circuit board require energy to be stored the 531X211KLDAAG1 uses various capacitors also called condensers in other languages. These parts use electrical fields to store the energy. The 531X211KLDAAG1 has one small transistor. To amplify electronic signals. The 531X211KLDAAG1 has fifteen chips. These chips are varying sizes. The 531X211KLDAAG1 also has one small area for an additional chip to be added. Chips are also called microchips, ICs or Integrated Circuits in various manuals. The 531X211KLDAAG1 has three covered male terminal ports and one open male port. The 531X211KLDAAG1 has labels along one edge and number along with the other.

Should you like more information, or a price quote please call or email the staff at AX Control.

*AX Control recommends using General Electric’s multiple data sheets and instruction manuals for circuit board specifications or safety instructions.