About the 531X170TBSABG1
The 531X170TBSABG1 is a GE printed circuit board component. This board component is not designed as a specific drive component but rather is designed for use in a number of general purpose drive systems manufactured by GE.
531X170TBSABG1 Card Hardware Developed
The 531X170TBSABG1 functions as a TB Option Card. This is a long and narrow board. It measures 2.75 inches by 11 inches, and is factory drilled in several places, including in each corner, once near the center of the board, and twice along one long edge. The center of the board is populated by a long terminal strip and another, shorter, terminal strip. The first of these components has fifty-four screw connections. The second terminal strip has twenty-one screw connections. Each of these connections is individually numbered and labeled on the board surface. The 531X170TBSABG1 has several other board components, inlcuding but not limited to:
- a rectifier diode
- a single jumper switch
- a stab-on connector
- an inductor coil
- one polyester vinyl capacitor
- (200V 10+/- 10% 104x122AA208.)
- three header connectors
The connectors are listed as a twenty-four pin connector, one a sixteen-pin connector, and the final one is a nine-pin connector. It has one vertical pin male cable connector and one female DC-37 connector. The board has two switch components with four toggles per switch. The toggles can be set to “DCE” or to “DTF.” The last board component is a DS2E-M-DC24V relay.
