F31X133PRUAPG1

Product Description

The F31X133PRUAPG1 functions as a Process Interface Board.  It is manufactured by GE. This board has been manufactured for use within general purpose drives like the DC-300 drive and other similar drives manufactured by General Electric.  It has been factory drilled once per corner to allow for screw mounting to a motherboard and is marked with codes like 006/03 and C-ESS, as well as letters and numbers along two edges for alignment.  It has a secondary board number of 531X133PRUAPG1.

The F31X133PRUAPG1  has over one hundred resistors, primarily made of metal film.  The board also has five resistor network arrays and seven potentiometers.  The potentiometers are labeled with their uses, such as SFB ZERO, STP SCL, PF OFF, and TACH SCL. The board has over one hundred capacitors, which are made of materials like polyester vinyl, ceramic material, and aluminum electrolytic material.  

The F31X133PRUAPG1  has eleven integrated circuits.   Some of these circuits function as analog line drivers, analog line receivers, analog operational amplifiers, and XOR gates.  These integrated circuits are usually marked with a manufacturer part number.

Other components on the F31X133PRUAPG1 include a three screw terminal strip that is marked with “Tach +” and “Tach -.”  There is a single switch component that is marked “Tach Sel” with seven individual toggle switches. These can be set to “open” or to a default closed setting.    More information about this board, including maintenance schedules, installation procedures, handling recommendations, and information on individual components, may be found through publications from GE like manuals, data sheets, and user guides.