Product Description
531X310SNDAEG1--High Horsepower Snubber Board
The 531X310SNDAEG1 is a PCB component made by GE for their general purpose drive systems. There are often several versions of each type of board within the 531x series; please check your manual to verify which specific board is compatible with your drive.
The 531X310SNDAEG1 functions as a High Horsepower Snubber Board. It is marked with the GE logo, information regarding the board’s use, and with the alternate F31x number. Some of this information is located on the rear surface of the board. There are six large and six small drill holes located along the edges and in the corners of the board.
The 531X310SNDAEG1 has nine stab-on connectors placed along the bottom board edge. There are an additional eight stab-on connectors on the left edge, the top edge, and in the middle of the board. There is one heat sink on the left side of the PCB.
Other components on the 531X310SNDAEG1 board include twelve header connectors. These are placed in two lines of six. There are several lines of metal film resistors. These are primarily located to the right and left of sets of very large axial capacitors. There are three sets of four capacitors located on the board’s surface. If more information is needed about the board, please review the data sheet for 531X310SNDAEG1.
General Electric provided all original technical support for the 531X310SNDAEG1 and other 531x series boards. Information regarding maintenance, operation, and installation may be found through drive manuals and series user guides. Manuals will also provide additional information regarding GE DC200 drive faults.
