F31X133PRUALG1

About the F31X133PRUALG1

The F31X133PRUALG1 is a circuit board fabricated by GE to fit into several of their older general purpose drives. This includes the DC-300 drive and other similar drives. The F31X133PRUALG1 is part of the 531X series and is etched with the secondary board number of 531X133PRUAMG1. The F31X133PRUALG1 functions as a Process Interface Card. This is a squarish shaped board with drill holes in each corner. The board is etched with several codes, including:

• 006/01
• 002/01
• 003/01
• cci3-0
• 92/38
• the GE logo

F31X133PRUALG1 Process Interface Board Hardware

The F31X133PRUALG1 is full of components.  Many of these are metal film resistors and capacitors made from ceramic and polyester film material.  The board has a single electrolytic capacitor. It also has:

• seven potentiometers
• seven resistor network arrays
• a small terminal strip (three screw connections,)
• a single header connector
• two male vertical pin cable connectors
• a few single-position terminal pins labeled “DCOM” and “+5V”

The F31X133PRUALG1 has one switch component. This is labeled “Tach Range.” The switch has seven individual toggles on its top surface that may be set to an open or to a closed position.  Each toggle is individually numbered. There are multiple integrated circuits on the board, including D Flip-Flops and analog inverters. The board has fifteen jumper switches placed across the board. Technical support for the F31X133PRUALG1 was provided by GE, often through publications like manuals, user guides, and data sheets.