531X175SSBASM2

Product Description

The 531X175SSBASM2 is a Dual Channel BIU Interface circuit board, produced by General Electric. The 531X175SSBASM2 has components that store energy for the circuit board to use in electrical fields. These components go by a few names depending on where you are in the world. The original names for these components are condensers or condensators. In English, the name was changed to capacitors. The condensers are different sizes from small to medium and long bars. The 531X175SSBASM2 can get rid of energy it doesn’t need by using resistors. To determine the amount of energy they are capable of getting rid of consulting with your engineer will assist you in decoding the markings on each resistor. The 531X175SSBASM2 has two red LEDs (light emitting diodes) on the top edge of the circuit board. Next to these LEDs is a red toggle switch. The 531X175SSBASM2 has multiple smaller circuits on the face of the circuit board. These smaller circuits are controlled by moving the caps to the Jumper Ports around the face of the circuit board. The 531X175SSBASM2 has a male terminal at the bottom edge of the circuit board to connect it with the system. The 531X175SSBASM2 forty-seven chips that vary in size from tiny to very large. These chips a typically made of silicon or another conductive material. The chips are their own enclosed circuit board that is used to house the instructions for the 531X175SSBASM2 as a whole. The chips are also referred to as microchips or Integrated Circuits (IC) in manuals.

Call or email AX Control for more information.