Product Description
The 531X211KLDADG1 is a printed circuit board component manufactured by General Electric. This board is used within the DC-300 drive as well as other general purpose drive systems from GE. Please consult your user guide or manual to determine compatibility with the 531x series of boards.
The 531X211KLDADG1 functions as an LED board. This board is drilled at each corner to allow for mounting. It carries several markings, including the board number, the manufacturer logo, and codes like 002/03, 007/03, 006/03, and F31X211KLD. The board is designed with seven LED number display panels. These are screw mounted in two lines of three with the final component mounted directly below. Each LED panel is capable of displaying up to ten digits.
In the lower right quadrant of the 531X211KLDADG1, the board is populated by four lines of eight red LED indicators. Each of these indicators is individually numbered. This area also includes several resistor network arrays, ceramic capacitors, and integrated circuits, including several programmable peripheral interfaces (Intel 8255A-5) and high-performance analog inverters (74F04N.)
The 531X211KLDADG1 has a single vertical pin male cable connector. It uses three jumper switches. Resistors tend to be made from metal film. Most capacitors on the board’s surface are made from ceramic material, but it does also utilize electrolytic capacitors. The board edges are marked with letters or numbers to allow for alignment. User guides, data sheets, or manuals that reference this part number will provide more information on installation procedures, handling instructions, as well as the function and operation of the board.
