531X134EPRBJG1

About the 531X134EPRBJG1

The 531X134EPRBJG1 is a Process Interface Card by General Electric. The 531X134EPRBJG1 is a large circuit board with many large and small components.

• The 531X134EPRBJG1 features one-hundred and six various capacitors.
• The 531X134EPRBJG1 has a small blue box this seven white buttons. The blue box is labeled “OFF” on the bottom and has each button labeled one through seven.
• The 531X134EPRBJG1 has a light green tower with three flat head screws on the top. These towers are used to connect various wires to the circuit board and are held in place with the screws.
• The 531X134EPRBJG1 has seven small blue Variable Resistors or Potentiometers. Variable Resistors are used to control energy flow.
• The 531X134EPRBJG1 also has over one-hundred and fifty resistors (some have banding and others have writing on the side). These markings can be read by an experienced engineer. The marking indicates the amount of energy that the resistors can scatter. In scattering the energy, the resistor does give off heat*.
• The 531X134EPRBJG1 has three male terminal ports that are used along with ribbon wiring harnesses to connect with surrounding circuit boards.
• The 531X134EPRBJG1 also uses EPROM and EEPROM to store data for this circuit board to function. These are referred to as microchips and store data that allows the circuit board to function.

Contact AX Control via phone or email for further material.

*General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.