About the 531X221KLDADG1
The 531X221KLDADG1 is a Control Board component manufactured by GE to fit into their general purpose drive systems like the AC-300 or the DC-300. There are several of these Control Board cards within the 531x series; please verify the exact card that meets your requirements before placing your order. The 531X221KLDADG1 is a large printed circuit board that is dense with components. It has:
- six male vertical pin cable connectors of different sizes
- two header connectors located toward the bottom of the card
- eight (8) potentiometers
- over twenty-five (25) resistor network arrays
- metal film resistors
- ceramic, polyester vinyl, and electrolytic capacitors
Integrated circuits on the 531X221KLDADG1 are marked with manufacturer codes. There are over thirty (30) integrated circuits. The board has jumper switches, an inductor, and a push button (reset) switch. The board has eight standoffs attached, which allow two auxiliary boards to be screw mounted to the motherboard if they are needed. The board is drilled in each corner to allow for mounting. GE was originally responsible for technical support for the 531x series. More information about this board can be found through GE publications like drive manuals, series user guides, and data sheets. Please follow all safety and handling procedures as recommended by the original manufacturer.
