The 531X144DRGAAGI module is a diagnostic readout board that was designed and produced by General Electric. The 531X144DRGAAGI diagnostic board continues to be stocked at AX Control, so if you are interested in making a purchase, please call us today to check on the availability of, ask any questions about, and place an order for the 531X144DRGAAGI diagnostic board.
The 531X144DRGAAGI diagnostic board is a small, square-shaped board with a few different kinds of electrical parts placed throughout its surface. On the left side, you can see the two male connection ports lying parallel to each other. Below that, there is a small integrated circuit. Another integrated circuit can be found at the top of the 531X144DRGAAGI diagnostic board toward the middle. On the right side of the board, you will see a row of six resistors lined up right next to a row of six LEDs to the right. In the top left corner, there are two components that are labeled as the “CARD TEST” and the “CELL TEST” jumpers. Scattered amongst these electrical components, you will see a few more resistors, a total of four capacitors, and a small diode.
Located along the sides of the 531X144DRGAAGI diagnostic board, you can see a total of six small mounting holes. When you are about to install the 531X144DRGAAGI diagnostic board, be sure to give the installation area a thorough cleaning, ensuring that any dirt, dust, and debris is cleared from the area.
In total, the 531X144DRGAAGI diagnostic board weighs about 0.14 lbs. or 0.064 kg.