Product Description

The 531X159MPEARG1 functions as a GE Motor Protection Board.  It is a PCB board component manufactured by GE as a component to fit into several of GE’s general purpose drive systems.  

The 531X159MPEARG1 is a rectangular shaped board with a factory-made screw hole in each corner.   The board has three fuses located on the left side of the board. It has four terminal strips placed side-by-side along the bottom edge. These include one terminal strip with three positions and three terminal strips with twelve screw connections.

The 531X159MPEARG1 has eleven potentiometers.  Rotary potentiometers can be used as voltage dividers.  The board has several resistor network arrays, which also can be used for voltage division.   The board has multiple metal film resistors as well as a few carbon composite resistors. Capacitors are made from materials like ceramic and polyester vinyl.  There are fourteen integrated circuits that perform different functions for the board.

The 531X159MPEARG1 has two transformers. One of these uses surface wiring.  It has two relay components. The board has multiple transistors, over twenty jumper switches, as well as six LED indicators and a single green LED indicator.  The board has two heat sinks. Other components have two stab-on connectors and two header connectors. More information regarding the board, including installation location and installation procedures as well as handling recommendations, may be found through publications like GE manuals, data sheets, and series user guides.

AX Control offers a number of money-saving programs.  If you would like to know more about any of these programs, click on the links located on this page.