531X212DPCABG1

About the 531X212DPCABG1

The 531X212DPCABG1 is a PCB component fabricated by GE to fit into its general purpose drive systems. This includes drives like the AC-300 and the DC-300. Some drives do not work with all general purpose drive systems; please review your system’s manual to determine compatibility. The 531X212DPCABG1 functions as a Power Connect Card.  This is a small, rectangular board with only a few components. It is drilled in six locations including in each corner to allow for mounting. The board has:

• the marked alternate F31x board number
• various code
• the GE logo
• a single fuse mounted in fuse holders
• a toggle switch located in the middle bottom
• three settings

The 531X212DPCABG1 has no other components on its surface beyond those previously mentioned and connectors. Connectors include two three-pin header connectors, eleven stab-on connectors, two terminal strips, and four male vertical pin cable connectors. Cable connectors are located on the right side of the board, one below each other. Each of the terminal strips has three screw connections. One is located on the top board edge and one on the bottom. Stab-on connectors are located within the body of the board, as are header connectors. More information about the uses of these connectors and how and what they connect to can be found through the board’s datasheet. GE provided technical support for the 531X212DPCABG1 board and other 531x PCBs.  Refer to user guides or manuals for detailed information regarding installation and handling.