531X301DCCASM1

About the 531X301DCCASM1

The 531X301DCCASM1 is a board component designed to fit into various GE general purpose drives and exciters. The board is used as a drive control card. It is a FANUC part that was created in coordination between Fuji and General Electric, in a desire to create parts with higher reliability and lower costs. As a drive control card, the 531X301DCCASM1 has built-in I/O peripherals that are designed to decode and interrupt timer/counters. It also provides voltage-controlled oscillator inputs. The board provides system-level functions like regulating loops for speed and position to the overall system. There is a reset switch on the board’s surface that allows for a reset of drive applications. The 531X301DCCASM1 includes:

• multiple integrated circuits
• inverters
• decoder/drivers
• operational amplifiers
• FPGA (field-programmable gate arrays.)
• resistor network arrays
• resistors
• jumper switches
• capacitors
• a multi-position LED indicator
• several standoffs

These standoffs allow later installation of auxiliary boards to extend the capabilities of the DCCA board. The main board has been pre-drilled to allow for mounting. It does not include a front faceplate. It is important to note there are several versions of the DCCA board available. Please be sure you are ordering the correct board for your needs. The 531X301DCCASM1 weighs approximately 1.75 lbs. We will ship this board protected by an anti-static wrap. Please order before 3 pm if you would like us to ship in-stock products that day.