Product Description
The F31X111PSHAEG1 is a board component manufactured by GE as part of the DC-300 drive or other general purpose drives produced by General Electric. These are industrial general-purpose drives designed for a variety of applications. The F31X111PSHAEG1 is part of the 531x series of boards; it is also marked with the board number 531x111PSHAEG1. Your system’s user guide or manual will help you determine compatibility with these boards. Our team will be happy to help if you have any questions.
The F31X111PSHAEG1 is an MFC/Power Supply Card. It has codes like VA-4, FR01, and 0187. Located in each corner of the board are factory-made holes for mounting. It has several slots cut into the surface of the board; most of these are traversed by components.
The F31X111PSHAEG1 has over a dozen stab-on connectors. It has one vertical pin cable connector and it has ten vertical header connectors ranging from two-pin to nine-pins. The board has four jumper switches and eight fuses of various types.
The F31X111PSHAEG1 has three transformers, three relays, and three inductor coils. The board has thirteen transistors, three potentiometers, three heat sinks, and four metal oxide varistors. MOVs are voltage-dependent resistors that are typically used to protect against excessive transient voltages. The board is built using both metal film and carbon composite resistors and uses capacitors of materials like ceramic, electrolytic, and polyester vinyl. The board has thirteen integrated circuits of various design. It has multiple diodes. More information about the operation and installation requirements of the board may be found through publications like manuals or user guides from General Electric.
