General Electric is the manufacture of the 531X304IBDAMG1 base driver circuit board. The 531X304IBDAMG1 is broken down into three sections. Each section looks identical to each other. They have the same number of diodes, resistors, condensers, integrated circuits, jumper pins, transistors, metal brackets, crystal oscillators, male terminal connection points, etc. Each component plays an important roll in the function of the circuit board. The integrated circuits also referred to by other names such as microchips, ICs or chips store data that controls the operation process of the circuit board. The diodes and jumper pins are used to direct the energy current. Diodes are a one-way street. The jumper pins are a manual on and off switch depending on where the engineer places the caps that come with them. The condensers also called capacitors in some manuals are used to hold energy and not let any energy escape. The circuit board can also draw the energy from the condensers as needed. Resistors purpose is to convert the unneeded energy to heat, so it can be removed from the circuit board. The crystal oscillators create high pitched and precise frequencies. The 531X304IBDAMG1 has multiple red lights referred to as LEDs (light emitting diodes) that illuminate as a current passes through it. The male terminal connection points are used to communicate with other circuit boards in the main system. The 531X304IBDAMG1 is considered an obsolete circuit board. General Electric does have data sheets and instruction manuals available for this circuit board.
Call or email AX Control for a quote or to order the 531X304IBDAMG1.