MicroNet Digital Control
3 Year Warranty
The Woodward MicroNet series features a customizable control system designed for controlling steam and gas turbines. Each part number features separate useful usages, coders, and fault codes. Many of these parts will be necessary for your systems to add features and to create new functionality.
The Woodward MicroNet series features a customizable control system designed for controlling steam and gas turbines. Each part number features separate useful usages, coders, and fault codes. Many of these parts will be necessary for your systems to add features and to create new functionality.
| Part Number | Description | Manuals | Stock Level |
|---|---|---|---|
| 5466-1000 | Woodward MicroNet Digital Control module 5466-1000 is a power supply unit that occupies up to two slots, operating on 24 volts of direct current input. This specific model is a MicroNet-Plus controller and has a CSA certification. | In Stock Ships 3-5 Days | |
| 5466-1001 | Woodward MicroNet Digital Controller Power Supply Module 5466-1001 has a power input of 110 VAC/125 VDC and is also a MicroNet-Plus unit. This unit has LVD, EMC, and ATEX certifications. Information on the 5466-1001 can be found in the 26166V2 manual. | Call for Availability | |
| 5466-1002 | Woodward MicroNet Digital Controller 5466-1002 is a MicroNet-Plus model. The unit is also a power supply module that operates at an input of 220 VAC in two slots. The 5466-1002 module can be used with redundant or simplex CPUs. | Call for Availability | |
| 5466-1035 | Woodward model 5466-1035 is a MicroNet Plus CPU5200 unit. This model contains a multitude of features such as 128 MB DDR RAM and a real-time clock. The 5466-1035 model can be used in redundant or simplex modes. | In Stock Ships 5-7 Days | |
| 5466-1036 | Woodward's 5466-1036 unit is a MicroNet Digital Remote Real-Time Network (RTN) unit. This device is not UL or LRS compliant. The 5466-1036 model is alternatively labeled as a Remote Transceiver (Remote XCVR) module. | Call for Availability | |
| 5466-1037 | The MicroNet CPU5200L model 5466-1037 produced by Woodward does not support expansion chassis operation due to not supporting any RTN ports on the device. This model has the capability to run a GAP application program with the corresponding GAP block, CPUML5200. | Call for Availability | |
| 5466-1045 | The MicroNet Plus CPU5200 model 5466-1045 does not support expansion chassis operation and includes one general-use Ethernet and serial port. The 5466-1045 model will typically respond to a +24 V remote reset signal. | Call for Availability | |
| 5466-1046 | Woodward MicroNet Plus RTN unit 5466-1046 is used for Cyber Security measures and cannot be used with CPU5200L devices due to the lack of expansion chassis. The 5466-1046 unit can be reset, doing so will immediately set the WDOG light red. | In Stock Ships Today | |
| 5466-1047 | Woodward model 5466-1047 is part of the MicroNet Digital Control series as a Triple Modular Redundant (TMR) CPU5200 unit. This model is the most preferred unit. The 5466-1047 model is also a CPU5200 unit that contains a Motorola MPC5200 processor. | In Stock Ships 3-5 Days | |
| 5466-1049 | Woodward MicroNet Digital Controller 5466-1049 is a MicroNet Triple Modular Redundant (TMR) Plus Kernel P.S. module. The unit receives a power supply of 24 VDC. Module 5466-1049 must be used with the TMR5200 CPU unit. | In Stock Ships 3-5 Days | |
| 5466-1050 | Woodward Discrete Input/Output Simplex Module 5466-1050 can be used in redundant or single power supplies. This unit also has two different configurations, those being 48/24 Discrete FTM's and 24/12 Discrete FTM's. | Call for Availability | |
| 5466-1051 | Woodward model 5466-1051 is a MicroNet TMR 48/24 HDDIO Smart-Plus Module. The inputs on this module are optically isolated and accessible through the 48/24 FTM. Unit 5466-1051 has five milliseconds of update time for both the discrete inputs and outputs. | Call for Availability | |
| 5466-1105 | MicroNet Digital Controller 5466-1105 is a Speed/Analog I/O Combo that has 4X 4-20 mA outputs and 4X speed 12X I/V selectable inputs. This unit has several standards that the controller meets which are ATEX, CE (EMC), and CSA standards. | Call for Availability | |
| 5466-1115 | The 5466-1115 unit was designed as a High-Density I/O Combo module as part of the MicroNet Digital Controllers series. This unit operates on standard accuracy. Module 5466-1115 was made to be used primarily with use with steam turbine markets and can be used to replace 5466-253 and -316 modules. | In Stock Ships 3-5 Days | |
| 5466-1141 | CPU5200SA (Secured Application) module 5466-1141 is considered a newer module within the MicroNet Digital Controller series as a MicroNet-Plus unit. This module can be used in either the MicroNet 8 or 14 VME slot chassis. | Call for Availability | |
| 5466-1145 | The 5466-1145 unit produced by Woodward as part of the MicroNet Digital Controller series is a MicroNet Plus CPU5200 model, that is Cyber Security licensed. When operating in redundant mode the 5466-1145 unit will have a second CPU located in the CPU2 section. | Call for Availability | |
| 5466-1146 | Woodward unit 5466-1146 is a MicroNet Plus RTN unit that is Cyber Security Licensed and features CSAm AEX, and CE (EMC) compliance types. This model cannot be used in conjunction with any of the CPU5200 modules since there is no available RTN expansion. | Call for Availability | |
| 5466-1156 | 5466-1156, MicroNet TMR 48/24 HDDIO-2 Smart-Plus. This module requires no calibration and does not have any potentiometers that need to be used for adjustments. The 5466-1156 module can be used in two different configuration types. | In Stock Ships 3-5 Days | |
| 5466-1158 | MicroNet Simplex 48/24 HDDIO-2 Smart-Plus module 5466/1158, is labeled as a combination module and is not backward compatible compared to the previous unit. This unit does not require any calibration as it does not have any potentiometers. | Call for Availability | |
| 5466-1245 | Woodward MicroNet-Plus CPU5200 Cyber Ready Enhanced Perf can be used in MicroNet-Plus or MicroNet Simplex operations, the unit will always mount in slot A1. The 5466-1245 unit cannot be used with an Ethernet module. | Call for Availability | |
| 5466-1246 | MicroNet-Plus RTN Cyber Ready Enhanced Performance module 5466-1246 from Woodward Inc will typically be used in the optional expansion one rack configuration. When the module has been mounted in the chassis the 5466-1246 unit will be located in the CPU1 slot. | Call for Availability | |
| 5466-1247 | Model number 5466-1247 is a CPU TMR5200 unit that is part of the MicroNet Digital Controller series produced by Woodward Inc. This unit is only for the TMR rack. The 5466-1247 module can connect up to three expansion chassis. | Call for Availability | |
| 5466-1510 | Woodward MicroNet Digital Controller and CPU P1020 module 5466-1510 have the ability for live insertion and live removal. The model does not have any standards. Unit 5466-1510 runs on an 800 MHz dual processor and has 512 MB RAM. | Call for Availability | |
| 5466-1520 | Woodward MicroNet Digital Controller 5466-1520 is a P1020 CPU with a Cyber Security Application. The model can be used in simplex and redundant systems. The 5466-1520 module has four general Ethernet ports, two 100 Mbps ports, and two 1000 Mbps ports. | Call for Availability | |
| 5466-258 | Woodward 5466-258 Simplex 48/24 Discrete Input/Output Module for Both MicroNet and Vertex-Pro Chassis. This unit has 1 Red Fault LED and is UL/ATEX Listed. The 5466-258 unit is part of the Vertex-Pro system for MicroNet Digital Controllers. | In Stock Ships Today | |
| 5466-318 | MicroNet Digital Controller 5466-318 is a Triple Modular Redundant Kernel Power Supply module. This module MUST be used/matched with the TMR040 CPU module. The 5466-318 unit can regulate the incoming power supply to 5 VDC or 10 A for the remaining kernel sections. | In Stock Ships 3-5 Days | |
| 5466-409 | MicroNet Pentium CPU Module 5466-409 operates on 233 MHz and has 64 MB of RAM. The application software typically used with this unit is AppManager. The 5466-409 module will be used in a simplex system. | In Stock Ships Today | |
| 5466-411 | 5466-411, MicroNet Ethernet RJ45, has four standards, ABS, CSA, CE (EMC), and LRS. This is an Ethernet cable rather than a physical model. The 5466-411 is used to provide communications between main-chassis CPU modules and expansion Chassis Remote RTN modules. | Call for Availability | |
| 5466-416 | MicroNet Pentium with Dual Ethernet Option Module 5466-416 can be used with main rack and expansion rack configurations in only simplex system configurations. This unit has an operating limit of up to one-hundred twenty-two degrees Fahrenheit. | Call for Availability | |
| 5466-5000 | Module 5466-5000 is a MicroNet Four Channel Speed Sensor, that is configured as an MPU input. This module is backward compatible and is used with unit 5464-658. When the 5466-5000 module is used in a simplex system it is connected through a low-density analog cable to an analog input FTM. | Call for Availability | |
| 5466-5001 | 5466-5001, MicroNet Eddy Probe Speed Sensor is a four-channel sensor. This unit has several standards, ATEX, CSA, and CE (EMC). The 5466-5001 is backward compatible and is used with unit 5464-834. | Call for Availability | |
| 5466-5025 | Woodward module 5466-5025 is a High-Density Analog I/O with twenty-four selectable inputs, either 0-5 volts or 4-20 mA. This unit can be used with RTD plug-ins. The 5466-5025 device will mainly be used in simplex systems. | Call for Availability | |
| 5466-5026 | MicroNet Simplex High-Density Analog I/O module 5466-5026 is a 24/8 Analog Smart-Plus module that can be used with GAP and AppManager applications. The 5466-5026 unit does not have any potentiometers and requires absolutely no calibration. | Call for Availability | |
| 5466-5027 | Woodward MicroNet Simplex High-Density Analog I/O module 5466-5027 operates up to twenty-four 4-20 mA inputs and up to eight 4-20 mA outputs. This unit has one LED on the front faceplate which can indicate up to nineteen different faults through flashing. | Call for Availability | |
| 5501-370 | Board 5501-370 is designed as a 5009/MicroNet TMR Power Supply. This unit runs on a supply of 24 VDC and requires a fixed wiring installation. When the 5501-370 board has been mounted in the TMR Power Supply Chassis there will be two redundant TMR units per chassis. | Call for Availability | |
| 5501-380 | 5009/MicroNet TMR Power Supply Board 5501-380 operates on a supply of 120 VAC/VDC, each voltage uses a different maximum current, max current for VDC is 5.8 A. The 5501-380 board must meet all of the appropriate standards and codes depending on the country it is being used in. | In Stock Ships 3-5 Days | |
| 5501-381 | Woodward MicroNet Board 5501-381is another TMR Power Supply unit that operates on 220 VAC. This model can indicate up to four different faults. The 5501-381 board will be located in the MicroNet TMR Power Supply chassis. | In Stock Ships 3-5 Days | |
| 5501-409 | The 5501-409 board is a Six Slot MicroNet Motherboard which is part of the MicroNet Digital Controller series. This unit meets three standards, CSA, ABS, & LRS. The 5501-409 board can be used to provide individual and short-circuited protected power to redundant smart fans. | Call for Availability | |
| 5501-410 | Woodward board 5501-410 is a MicroNet Power Supply unit that operates at 24 VDC. This board should never be installed or removed from the circuit live. The 5501-410 board can be used with redundant or simplex power supplies. | Call for Availability | |
| 5501-411 | Woodward's 5501-411 unit is a Power Supply Board designed for the MicroNet Digital Control series to be used at 120 VAC/VDC. The board uses three chassis slots. Unit 5501-411 has four power supply health LEDs on the front faceplate. | Call for Availability | |
| 5501-412 | 220 VAC Power Supply Board 5501-412 is part of the MicroNet Digital Control Series. This unit is a main power supply that can be used in simplex/redundant modes. The 5501-412 board is considered to be a high-voltage board that has both AC and DC inputs. | Call for Availability | |
| 5501-423 | The 5501-423 board from Woodward is a MicroNet 12-Slot motherboard that can be used with redundant or simplex systems. The manuals are 26166V1 and 26166V2. The motherboard ensures that overheating does not occur. | Call for Availability | |
| 5501-465 | Woodward MicroNet Simplex Power Supply Board 5501-465 operates on an input voltage of 24 VDC, the board will have a holdup time of five milliseconds. When redundant power supplies are used the 5501-465 board will occupy three slots. | In Stock Ships 3-5 Days | |
| 5501-466 | Power Supply Board 5501-466 is a Simplex P.S. as part of the MicroNet Digital Control series. This specific power supply board operates at a 120 VAC/VDC input. The standards for the 5501-466 board are the same as the previous module. | In Stock Ships 3-5 Days | |
| 5501-467 | Woodward MicroNet Simplex Power Supply Board 5501-467 operates on an input voltage of 220 VAC/VDC. This model is considered high-voltage. Board 5501-467 has the ability to be used in MicroNet Plus or MicroNet Simplex chassis. | In Stock Ships 3-5 Days | |
| 5503-279 | The 5503-279 board was produced by Woodward as part of the MicroNet Digital Control series as a MicroNet HDVIM (AI/RTD/TC) unit with several standards. This board is considered as a thirty-four-channel board with no potentiometers. | Call for Availability | |
| 5503-335 | Woodward MicroNet 5200 CPU Module 5503-325 is inserted into the MicroNet Plus/Simplex chassis, for a 2-rack configuration, there is only one of these modules. This module can be removed and inserted live from the MicroNet Plus chassis. | Call for Availability | |
| 5503-336 | 5503-336, the Remote XCVR module for Woodwards series of MicroNet VME Racks. This unit receives and sends information via durable copper cable to and from its associated Main XCVR module. | Call for Availability |
