IS200EGDMH1A

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 4.80 (5)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 4.80 (5)
  • Click a star to rate this product
The IS200EGDMH1A EX2100 Exciter Field Ground Detector Board can be found mounted in the Excitation Control Cabinet. The Instruction Manual for the IS200EGDMH1A is publication number GEI-100467 and can be found under the manuals tab on this page.

AVAILABILITY:

IN STOCK
SHIPS TODAY

Sell Surplus: Have a IS200EGDMH1A to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: IS200EGDMH1A
  • SKU: IS200EGDMH1AGBTC
  • Manufacturer: GE Industrial Systems
  • Series: EX2100 Excitation Control

IS200EGDMH1A Technical Specifications

Dimensions Height: 9 inches / Depth: 6 Inches / Faceplate Width: 1 1/2 Inches
Functional Acronym (Abbreviation) EGDM
Instruction Manual Number GEI-100467 (GEH-6632 Series Manual)
Manufacturer GE Energy
Mounting Location Exciter Power Backplane Rack (EPBP)
Product Type Exciter Field Ground Detector Module
Series / Product Line Excitation Control System EX2100
Simplex System Qty 1 EGDM Used
Weight 1lbs 3oz
Wiring Board Description Bridge and Protection Module

About the IS200EGDMH1A

The IS200EGDMH1A model is an exciter field ground detector module, which is what the functional abbreviation of EGDM stands for. During installation, this module will mount in the exciter power backplane rack and will be in proximity to the EPSM module. This module operates on a simplex and redundant system, the simplex system requires one EGDM, while a redundant system requires three EGDM modules. The IS200EGDMH1A is used in conjunction with an EXAM module, together these two modules work to ascertain the potential of field ground leakages on any point of the DC or AC side. 

When the EGDM module and DSPX module are attached through fiber-optic cables, the EGDM module will send the voltage that has been used over to the DSPX module through the fiber-optics; after this process has occurred the voltage will then be checked, and alarms will be attached by the DSPX. The EGDM module has three LED indicators on the faceplate. The three indicators on the IS200EGDMH1A module are a power indicator, an active indicator, and a selective master indicator. 

One of the best ways to identify this module is through the alphanumeric catalog number that is directly printed on the board, but there is also a small plate on the bottom of the faceplate that indicates what the module is. 

Frequently Asked Questions about IS200EGDMH1A

How is the EXAM module used with the EGDM module?

One of the ways that the EXAM module works is by sensing the voltage across the ground resistor and will then send the signal to the EGDM through a nine-conductor cable.

If the IS200EGDMH1A board is used in a redundant system how are the three boards configured?

If the EGDM board is used in a redundant system the three boards will be configured as a Controller (C), Master 1 (M1), and Master 2 (M2). The configuration for each EGDM is controlled by a set of program pins on the P2 connector. 

Is the IS200EGDMH1A model an active system?

Yes! As an active system, the EGDM model will apply a voltage to the field circuit. 

What does the EGDM model do?

There are numerous functions of the EGDM model, one of them being to detect field leakage resistance between any point in the field circuit of the ground and the generator. 

Reviews For IS200EGDMH1A

Internal Review
(5.0)

The IS200EGDMH1A is not a high failure rate module and therefore requires few spares and repairs. That said, because redundant systems use three IS200EGDMH1A, it is vital to keep at least one spare on hand. Overall the EGDM Exciter Ground Detection Module is a simple and quick repair when it does fail and OEM spec parts are still available to complete the refurbishment by our team of specialists. - AX Tech Team

Repair Services For IS200EGDMH1A

Type Lead Time Price Action
Repair Service 1-2 weeks $1095

Our highly skilled technicians can repair your IS200EGDMH1A. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More