Product Description
Control model 8440-2233 is manufactured by Woodward inc and is available for purchase at AX Control inc. We also buy the control if you have a surplus of the model. If you wish to sell your control to us you can contact us by phone at (919) 372-8413 or by email at sales@axcontrol.com. While using your model the monitoring level one of the control is typically at an underrunning setting and the limit level two of the control will need to be at ninety.
When you are operating your control and the GCB goes into override mode and the water pump is connected to the busbar the GCB will close during the critical mode if it is active. You can start your control when it is in override mode and you can select a number of starting attempts between one and twenty, before you select the number of start attempts you must regard the specifications for your starter.
Note that when you are potentially connecting a modem to your control you can use other GSM modems but you should take stock that the modem that you connect your control to, you control will not send AT commands to the connected modem, the dispatch of the alarm messages will be performed in relation to the modem after energizing discrete inputs.
Your control has internal load limits for the mains and the generator of the control. One of those will be the load shedding that will be used through the generator power, for the generator load hysteresis the default will be at 5%, which will be set depending on the load that will be disconnected.
