In Stock
85ER4060 Image One
2 year warranty

85ER4060 Image 1
85ER4060 Image 2
85ER4060 Image 3
85ER4060 Image 4

85ER4060

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
The 85ER4060 drive is one of the bookshelf drives produced by Reliance Electric within the GV3000 series. This model has a current rating of 8.5 A. The only available enclosure used with the bookshelf drives is IP20 the enclosure is mainly used for indoor applications and protecting against objects greater than 12 mm.

AVAILABILITY:

IN STOCK
SHIPS TODAY

Sell Surplus: Have a 85ER4060 to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: 85ER4060
  • SKU: 85ER4060RE
  • Manufacturer: Reliance Electric
  • Series: GV3000 Drives

85ER4060 Technical Specifications

Part Number 85ER4060
European Stock Number 896.05.11
Manufacturer Reliance Electric
Series GV3000
Instruction Manual D2-3426 & D2-3427
Bookshelf Drive Type ER, meaning without CE Filter
Keypad/Display Built-In Keypad
Enclosure IP20
Input Voltage 380-460 VAC
HP 5 HP
Hz 50/60Hz
Phase 3 Phase
Regulator System(s) Vector and V/Hz Regulator
Current Rating 8.5 A
Power Loss Watts (Full Load) 150
Input Amps 13 A

Product Description

Bookshelf Drive 85ER4060 is one of the GV3000 drives produced by Reliance Electric out of the United States in Ohio. This bookshelf drive does not come with a CE filter, which is indicated by the ER in this part number. The current rating which is designated by the first two characters within the part number is 8.5 A. There are two model/stock numbers, the 85ER4060 is the U.S. model number with a European stock number of 896.05.11. The part breakdown of the European stock number is the drive model, power module size, terminals, and circuits. The 11 at the end of the European stock number indicates that there are DC bus terminals and a braking transistor circuit. 

In the D2-3427 GV3000/SE AC Bookshelf Drive Version 6.06 Hardware Reference, Installation, and Troubleshooting Manual Figure 2.3 lists the five main components of drives with 2 to 15 Amperes, which the 85ER4060 drive has. The components within this drive are a fan, output relay terminal strip, display/keypad which is on the front panel of the drive, a power printed circuit board (PCB), and regulator PCB. 

The regulator PCB on the 85ER4060 has several features that it can provide one of which is providing pulse width modulated (PWM) gating signals to the insulated gate bipolar transistors (IGBTs) power devices. The regulator board will send the PWM gating signals through the current feedback signal section of the power board to the secluded gate drivers. These gate drivers will then switch the IGBTs and produce an appropriate PWM waveform that will correspond to the V/Hz regulation (frequency) or FVC regulation (speed) references. 

Frequently Asked Questions about 85ER4060

What does fault code "F60" indicate on 85ER4060?
On 85ER4060, fault code "F60" is the fault code for an option port identification error. This fault is caused by 85ER4060 not being able to recognize the option board. To correct this fault on 85ER4060, check the ribbon cable between the regulator board and option board on 85ER4060. Also, refer to the specific option board manual.
What is the input KVA on 85ER4060?
85ER4060 has 10.4 input KVA.
What are the output amps on 85ER4060?
When 85ER4060 is at a carrier frequency of 2 or 4 kHz with V/Hz regulation, 85ER4060 has 8.5 output amps, but when 85ER4060 has 8 kHz, 85ER4060 has 5.5 output amps. While when 85ER4060 is using vector regulation, 85ER4060 has 6.7 output amps at 2 and 4 kHz and 5.0 output amps at 8 kHz.
What are the first menu parameters on 85ER4060?
The first menu parameters on 85ER4060 are parameters P.001-P.006. These parameters include: accel time 1, control source, current limit, decel time, max speed, min speed, and second menu password parameters on 85ER4060.

Reviews For 85ER4060

Internal Review
(5.0)

If needing a drive that can operate on version 6.0 firmware with the vector or volts/hertz regulators on a current rating of 8.5 A without a CE filter, then this model is the best one for you. This model is also equipped with an enclosure that can protect the drive against objects that are 12 mm or greater in size. - AX Control Technician

Repair Services For 85ER4060

Type Lead Time Price Action
Repair Service 1-2 weeks $1064

Our highly skilled technicians can repair your 85ER4060. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More