Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (10)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (10)
  • Click a star to rate this product
Reliance Electric GV-3000 GV3000/SE 60HP 460VAC VS AC Drive



Sell Surplus: Have a 60G4160 to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: 60G4160
  • SKU: 60G4160RE
  • Manufacturer: Reliance Electric
  • Series: GV3000 Drives

60G4160 Technical Specifications

Manufacturer Reliance Electric
Series GV3000
Part Number 60G4160
HP 60 HP
Input Voltage 380-460 VAC
Enclosure Type 1/IP20
Keypad/Display Built-In Keypad
Phase 3 Phase
Hz 50/60Hz
Instruction Manual D2-3359 & D2-3360

About the 60G4160

The 60G4160 unit is a three phase AC drive that comes from the company Reliance Electric. This drive was made for the GV3000 series, which is now considered a legacy series. Therefore, the 60G4160 AC drive is no longer being produced under the Reliance Electric name. Even though this product is not being made anymore, AX Control typically has it in stock. Our website is conveniently designed in such a way that you can verify whether the 60G4160 AC drive is in stock by looking on its dedicated page.

The 60G4160 AC drive has a small user interface area on its faceplate, which comes equipped with a rectangular display unit, a keypad with large buttons for display and drive functions, and an area with numerous small LED status indicators. These components make the 60G4160 AC drive, as well as other drives within the GV3000 series, an accessible product.

The 60G4160 AC drive uses the V/Hz selected regulation type. This regulation type has a 110% continuous output current capability. Additionally, the 60G4160 AC drive’s input is rated at 71.7 kVA, 90.0 A, and has an input voltage range of 380 VAC to 460 VAC, with a +/- 10% accuracy rating. The output amperage for this drive, like most of the GV3000 drives, stays the same no matter the kHz rating at which it is operating. At 2 kHz, 4 kHz, and 8 kHz, the 60G4160 AC drive’s output is rated at 78.0 A. Overall, the 60G4160 AC drive has 60 HP and 1200 W for full load power loss.

Frequently Asked Questions about 60G4160

How many input and output amps does 60G4160 have?
60G4160 has 90 input amps. 60G4160 has 78 output amps.
What does fault code "F60" indicate on 60G4160?
Fault code "F60" is the fault code for an option port identification error on 60G4160. This fault means that 60G4160's regulator could not identify the option board. This fault is a fatal fault on 60G4160 and to fix the fault, you should most likely refer to the appropriate option board manual and check the ribbon cable between 60G4160's regulator board and the option board.
What parameters must be set on 60G4160 to wire digital inputs 1 and 2 on 60G4160?
To wire digital inputs 1 and 2 on 60G4160, the start and stop inputs on 60G4160, which are located at terminals 24 and 23 on 60G4160's terminal strip, two parameters must be set on 60G4160. The parameters that must be set for start and stop input wiring on 60G4160 are parameters P.000 and P.025. These parameters are the control source parameter and stop type parameter on 60G4160.
Which manual is best for helping with wiring 60G4160?
Manual D2-3360, the hardware reference, installation and troubleshooting manual for 60G4160, is the best manual for wiring 60G4160. The manual goes into great detail about all the different types of wiring to 60G4160, and the manual will provide you with steps for wiring and planning and instructions before and after wiring 60G4160. For a copy of the manual, request Manual D2-3360 or the hardware manual for 60G4160.

Repair Services For 60G4160

Type Lead Time Price Action
Repair Service 1-2 weeks $1407

Our highly skilled technicians can repair your 60G4160. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More

60G4160 Manuals, White Papers, Data Sheets, and Troubleshooting