Product Description
The 100V2060 model is part of the GV3000 drives produced by Reliance Electric. This drive operates on 100 HP and can be used with vector or volts/hertz (V/Hz) regulators. The maximum input voltage the 100V2060 drive will use is 230 VAC with a range of 200-230 VAC. There are a number of power ratings used with this drive; there are input amps, input kilovolt-amps (KVA), output amps, and a full load of power loss watts. Each of these power ratings has its own value and is as follows:
- Input Amps: 275 A
- Output Amps: 275 A
- Power Loss Watts at Full Load: 2250 W
- Input KVA: 109.6 KVA
All of these values are vital in ensuring that this drive is operating correctly and functioning at its highest ability at all times. If any of the aforementioned values are different than the assigned value, it would be best to stop the model and assess it to see if any of the settings must be changed. Considering the high horsepower of this drive, some significant function faults may impact the 100V2060 owner disproportinately. One fault not uncommonly experienced by operators of this GV3000 drive is the low DC bus voltage fault, represented by the fault code LU on 100V2060's built-in keypad display. This fault happens either due to a defective input rectifier diode, or due to too long of a line dip in the drive's DC voltage. To act on this fault correctly, one must first check the drive's input voltage, line fuses, and DC bus voltage; adding transformers and replacing diode sets as needed. For more information on fault code troubleshooting and general drive programming, be sure to access Reliance Electric's handy instruction manual D2-3417.
The 100V2060 drive is one of the heavier drives in the GV3000 series coming in at just under one hundred pounds. The dimensions of this model are dimension H1 28.1", dimension H2 28.9", dimension H3 26.5", dimension H4 30.6", dimensions W 9.6", and dimension D 14.4". For more information on the physicality of this drive, such as the locations of the components, what type of enclosure the model is used in, and other physical features, refer to the GV3000/SE AC Drive 30-100 HP, 230 VAC Hardware Reference, Installation, and Troubleshooting Manual D2-3417 attached above.
