The 0-56921-403AA model is a part of the GV3000 series of cards. These GV3000 products as a whole were designed and manufactured by the Reliance Electric Limited industrial division of electromechanical products. This unit listed here is a part of their series of communication option circuit boards. These units are based for communicating with the ControlNet Network, which is designed for the complete control of the Reliance Electric GV3000 motor drives.
The 0-56921-403AA is a printed circuit board card attachment, designed to be mounted to a GV3000 drive by a ribbon cable. The ControlNet network is able to provide different commands for the 0-56921-403AA unit to use. There are six commands; Start, Stop, Reset, Total Control, and a method of fault coding the unit. While under the 0-56921-403AA card’s control, the GV3000 drive is marked as a node in the ControlNet network.
The 0-56921-403AA is outfitted with a flash based memory. This provides operators on site with an easy to access way of updating the unit’s firmware version. An RS-232C serial communication module is integrated into the unit’s frame, able to interface with a serial programming connector.
The 0-56921-403AA is also outfitted with two BNC connectors for redundant communication abilities. The RJ-45 port is used for node access. There are also a trio of LED lights to indicate device status to the users.
AX Control Inc. is able to provide the 0-56921-403AA as one of our reconditioned materials originally developed by Reliance Electric. Each of our Reliance devices on hand is protected by our automatic warranty.
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved