The 45C333 unit was created to be a fan kit that is compatible with the racks in the AutoMate series of PLCs. The 45C333 fan kit and the AutoMate PLCs were developed by Reliance Electric, but the production of the AutoMate series has since been halted. Despite that, AX Control continues to stock the 45C333 fan kit as well as many of the products in the AutoMate series. The availability of these products are listed on our website, so be sure to check before placing your order.
The 45C333 fan kit was made so it could be used with the AutoMate 45C313 13 slot rack. Please note that this fan kit is only compatible with the 45C13 13 slot rack. Should you find yourself in need of a fan kit for any other AutoMate rack, then you will need to find that rack’s own fan kit. This includes the 45C314 13 slot cabinet mount rack, which uses the 45C334 fan kit despite having the same amount of slots. For your convenience, you may click on any of these links to be taken to these device’s specific pages.
The 45C333 fan kit is a large, rectangular piece of machinery that has two large fans on its front side. On the top part of the 45C333 fan kit, there is a small terminal block with a total of three terminals located on it. Directly next to that, you will find a very long handle that can be used for carrying the 45C333 fan kit. The bottom of this device has holes for you to mount it to the 45C13 13 slot rack.
The 45C333 fan kit weighs about 7.00 lbs. or 3.18 kg.