The 0-57408- power module interface was designed and manufactured by Reliance Electric. This original manufacturer has since halted production of the 0-57408- power module interface, but AX Control always makes an attempt to keep it in stock. If you are in need of this particular module, then please contact us at any time between 8:00 a.m. and 5:00 p.m. during the week. Our sales representatives will let you know if the 0-57408- power module interface is in stock.
The 0-57408- unit is a thin, rectangular shaped power module. The top of the 0-57408- model’s faceplate has a grouping of four terminals. These terminals can have wires connected to it. Above these terminals, there is black text which reads, “CURRENT CALIBRATION.” By connecting wires to the terminals, the user will have the ability to adjust the current that the power module controls. If you look below these terminals, there are three female parallel ports. The first port is labeled as the “TO DRIVE CONTROLLER.” This specific port is smaller than the following two, which are the exact same size. The second port is labeled as the “TO ANALOG I/O” port and the next port is labeled as the “TO POWER MODULE” port.
The 0-57408- power module interface is classified as a static sensitive device, so be sure to follow proper safety guidelines when operating and installing this device.
The 0-57408- power module interface has a total estimated total weight of about 1.55 lbs. or 0.70 kg. This total does not add in any of the materials that we will use to house the 0-57408- power module interface.