LT3300-T1-D24-K

Product Description

The LT3300-T1-D24-K is a QVGA all-in-one operator interface HMI from Proface Xycom.  This unit offers up to 65k colors and has a DIO input in a DIO sink-type output.  If your needs require a unit like this one with a source type output, refer to our listing for the LT3300-T1-D24-C. 

The LT3300-T1-D24-K includes an analog resistive film touchscreen.   The front panel has a display area of 4.61 inches by 3.48 inches.  This unit should be stored within a temperature range of -4 to 140 degrees Fahrenheit.  Do not operate this unit below zero degrees or above 50 degrees.   When it has been installed according to OEM specifications the LT3300-T1-D24-K meets CE, CSA, and certain UL certification requirements.  Additionally, it also meets NEMA type 4x/13 and IP65f environmental ratings. 

This unit has a DIO connector.  This should be removed from the LT unit before wiring begins.  Connections use stranded wire.  Use a flathead screwdriver to create an open state in the wire insertion hole, then insert the wire into the adjacent round-shaped hole.   Once the screwdriver is removed, the insertion hole will close and secure the wire.  

Our company works hard to maintain the on-hand stock of these all-in-one HMI Proface units.  If you need help finding the correct unit for your application, talk to our team today.  We’re always happy to help walk you through the options available. 

Most of our in-stock products can be on their way to you in a matter of hours.  Let our team know if you need expedited shipping.   Local customers are always welcome to arrange for pick up at our facility.