AGP3500-S1-D24-D81K

Product Description

The  AGP3500-S1-D24-D81K  is a standard machine built with a 10.4 inch LCD STN color monitor.  The unit is powered by a 24 VDC supply and uses a sink-type DIO board.  If your requirements need this kind of monitor with a source-type DIO board, look at the AGP3500-S1-D24-D81C. 

The AGP3500-S1-D24-D81K is a UL/c/UL listed device.  It can be used within non-hazardous as well as Class 1 Division 2 Groups A/B/C/D hazardous locations.   It must be noted that the unit has a rear face that is not approved as an enclosure and it is designed to be installed within a vertical panel.  The unit should be used indoors. 

The field ground wiring of this unit should be installed in a separate location from another field grounding.  The AGP unit requires a grounding resistance of 100 or less and the use of 0.0062 inch2  or thicker wire.  Also, the proper torque must be used to connect wires to terminal block screws.  Improper torque settings may result in incorrect unit operation or short circuits.  Additionally, anyone working with this equipment should avoid letting any type of metal debris from falling into the AGP unit.  Such debris may cause the unit to malfunction, catch on fire, or may cause the unit to operate incorrectly. 

More information about the AGP3500-S1-D24-D81K is available through publications from Pro-face like original manuals and user guides.  Sales questions can be directed to our staff.  Most in-stock products will ship the same day your order is placed.  Please order before 3 pm to allow us time to process your order.