AGP3300-L1-D24

Product Description

The AGP3300-L1-D24 is a programmable operator interface from ProFace’s GP3000 series.  This HMI unit is a 5.7-inch standard machine that uses a monochrome LCD analog touchscreen.   This unit offers sixteen shades of black and white on a 5.7 inch 320 x 240-pixel resolution display.   The touch panel has eight levels of contrast and brightness available.  These can be adjusted using the touchscreen.   This machine supports several fonts including Japanese.   Fonts can be expanded eight times in height and width.  

The AGP3300-L1-D24 uses GP-Pro EX Software that is supported by ladder logic for programming.  The unit is UL/c-UL/CSA approved.   It should be noted the rear face of this unit is not rated as an enclosure in itself.  This unit is designed to be mounted with its front panel facing outward and with the rest of the unit within a panel enclosure.   The AGP3300-L1-D24 is designed for indoor use only. 

The AGP3300-L1-D24 can connect to a variety of different devices including modems, bar code readers, printers, expansion units, commercial hubs, and host controller PLCs.  The unit offers a number of connectors to allow for these interactions, among them an RS-232 connector, USB connectors, and Serial connectors.  The unit also has a CF card slot and an Ethernet port.  

Additional information and specifications about the AGP3300-L1-D24 may be found using documentation from Proface like manuals and user guides. Please review all information regarding the proper handling of this device before attempting to install your new part. This is for the safety of your workers as well as to maintain your equipment.