GP2501-TC41-24V

About the GP2501-TC41-24V

The GP2501-TC41-24V is a 10.4-inch human-machine interface from Xycom Proface. These ruggedized operator interface panels are specifically designed for use in the more challenging industrial environments where non-industrial components might not hold up. This is only one of many Proface HMIs available within our stock. 

The GP2501-TC41-24V has external dimensions of 12.48 inches by 9.57 inches. The unit is 2.28 inches deep. This device is designed to be mounted within a panel. Be sure to check the placement of the rear gasket before installing to ensure a proper seal is made. Additionally, this gasket should be checked periodically for signs of wear like scratches or visible dirt, as these may affect the unit’s dust and drip resistance. 

The GP2501-TC41-24V works with a DC24V input. The GP unit itself does not have any sort of power switch, however, so a breaker-type switch should be attached to the unit’s power cord during installation. 

Four DIP switches are located inside the GP2501-TC41-24V’s CF Card’s cover. The switches control whether startup from the CF card is enabled. The fourth DIP switch is used when the CF cover is damaged, and forces closure of the Card unit. Two of the switches are reserved. 

Use associated GP manuals to find Serial interface pin out charts. These will provide you with signal names and descriptions for each pin, as well as a list of recommended connectors, covers, and cabling. AX Control maintains a significant amount of on-hand stock of these units, and can typically ship out your order the day we receive it. Check with our team for actual turnaround times.