Product Description

The GP2500-SC41-24V is a ten-inch HMI graphics panel from the GP2000 series of HMIs. This series was designed by Proface Xycom for use within factory/industrial settings where a rugged machine is needed. This unit can also be identified by global code PFXGP2500SD. While it is no longer available through Proface/Schneider Electric, AX Control typically has units in stock and ready to ship.

The front touch panel of the GP2500-SC41-24V has an effective display area of 8.34 inches by 6.24 inches. It supports several language fonts and has 32 x 24 keys/screen with one or two-point touch input. The unit has eight levels of contrast adjustment and four levels of brightness control.

The GP2500-SC41-24V operates on a 24 VDC input voltage. It has a rated power consumption of 50W or less and an In-rush current of 30A or less. This unit should only be used in ambient temperatures higher than zero degrees Celsius or lower than 50 degrees Celsius in relative humidity of 10-90%, non-condensing. The unit is not designed for locations with corrosive gases or conductive levels of dust.

The GP2500-SC41-24V is built within a protective casing but is not designed as a standalone unit. It is typically mounted with its front face forward built into a solid panel. The unit should be installed with a mounting gasket and clips to minimize vibration and to minimize egress points for debris, moisture, and oil that may damage the equipment over time.

If more information is required, please refer to original documents from Proface like manuals or user guides, which will help walk you through maintenance and installation procedures.