KV-16DR

Product Description

Keyence does not make this KV-16DR base unit anymore, but can still be found. This PLC has 10 inputs and 6 relay outputs and uses direct current to power the programming on this unit. This Keyence Visual KV-16DR unit can with stand 24 VDC (+ 10%, -20%) input power that is supplied to this unit by voltage. The instantaneous outage time is not even 2 milliseconds that this KV-16DR will allow. The specifications of the Keyence visual KV-16DR Unit can be found in the manual, along with software installation. This KV-16DR unit consumes a maximum of 120mA with 24 VDC conversions value for the internal currents. There is a test that has been done on this unit with 500 VDC megger for the resistance of the insulation. The insulation resistance is in between the power supplied to the terminals and the input terminals, also all of the external terminals and including the units case. The least amount of insulation is 50 MΩ that can be resisted. The Keyence Visual KV Series Units, including KV-16DR, has a resistance to some corrosive gasses that can become present. Dust can damage the unit in large amounts. The KV-16DR by Keyence only weighs approximately 190g. This Keyence Visual KV-16DR Unit is resistant to small amounts of dust particles and some gasses that can corrode the unit. Also this KV-16DR unit has a resistance to noise of 1,500 Vp-p or greater, with a pulse width of 1 microsecond by the way of a noise simulator.