QPI-PSL-201

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
GE QuickPanel Communication Module Adapter QPI-PSL-201

AVAILABILITY:

IN STOCK
SHIPS TODAY

Contact: 1-919-372-8413 (Intl.), 1-800-991-7026 (US), sales@axcontrol.com

Warranty: Learn More

Sell Surplus: Have a QPI-PSL-201 to sell? Sell Now

Exchange Credit: Learn more about our exchange credit program

QPI-PSL-201

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
GE QuickPanel Communication Module Adapter QPI-PSL-201

AVAILABILITY:

IN STOCK
SHIPS TODAY

Contact: 1-919-372-8413 (Intl.), 1-800-991-7026 (US), sales@axcontrol.com

Warranty: Learn More

Sell Surplus: Have a QPI-PSL-201 to sell? Sell Now

Exchange Credit: Learn more about our exchange credit program

QPI-PSL-201 Technical Specifications

Model Number 2980020-02

Product Description

QPI-PSL-201

The QuickPanel series of products was a lineup of human/machine interface modules. Built with a standard touch screen interface and a set of serial and download ports (input and output), this product, the QPI-PSL-201 is not a touch screen unit, but a network interface adapter module.

What this module is designed for is to bridge the gap between the QuickPanel modules (specifically the 10.5 and the 12.1 size touch screens), and the interface modules for the system networks. The programmable logic controllers that are able to be connected are the A-B Remote Input and Output, the A-B Data Highway Plus, the Modbus Plus, the Genius Input and Outputs, and the Profibus and Profibus DP Slave. There’s also the DeviceNet network, Interbus-S, and CANOpen.

The 10.5 inch units that the QPI-PSL-201 can be integrated into has standard dimensions for models of this size: a width of 12.48 inches (or 317 millimeters), a height of 9.57 inches (or 243 millimeters), and then a depth that reaches 3.05 inches (or 77.47 millimeters). It weighs up to 6.6 pounds, or 2.99 kilograms.

The 12.1 inch units have the standard dimensions of 13.62 inches (345.95 millimeters) x 10.7 inches (271.8 millimeters) x 4.45 inches (113.03 millimeters).

These units were all developed and produced by the industrial automation branch of General Electric and have been fully refurbished and optimized by our technical repair staff at AX Control.

Frequently Asked Questions about QPI-PSL-201

How do I prevent a malfunction with this unit QPI-PSL-201?
In order to protect this unit, you will need to have the unit operating at a temperature inbetween 0 degrees Celcius to 50 degrees Celcius, also do not operate or store this unit that can be exposed to high temperatures. Keeping the QPI-PSL-201 unit out of direct sunlight and away from a lot of dust is also reccomendended. Also keeping the unit far from vibrations and strong impacts. Keep corrosive vapors and fumes away from the unit for it to operate properly. 
How to install this Bus Conversion Unit as a Quick Panel Ethernet Series Unit?
This QPI-PSL-201 Bus Conversion Unit can be installed by disconnecting the Quick Panel Ethernet Series power supply by unplugging the power cord. Take caution removing the Expansion Slot covers, they are located on the back on the Quick Panel Ethernet Series Unit, there are a total of 3 expansion slot covers. Be very careful to not touch the copper spring or the copper springs contact without using gloves. Removal of the Quick Panels Ethernet from the unit can lead to early malfunctions or breakdown of this unit, so only remove the Quick Panel Ethernet if it is absolutely necessary. Aligning the Expansion Bus Connector with the Quick Panel Ethernet Series unit to the Rear Face Expansion Unit I/F. Pressing the unit down helps the two units connect together. Make sure that the two connectors are attached, then screw the cover onto the back of the unit. Be sure to attach the Quick Panel Ethernet Attachment Slots and the expansion unit. The expansion unit needs to be attached to the Bus Conversion Unit and two expansion unit attachment screws need to be tightened. 
  • QPI-PSL-201 Series A
  • QPI-PSL-201 Series B
  • QPI-PSL-201-A
  • QPI-PSL-201-B
  • QPI-PSL-201-C
  • QPI-PSL-201-D
  • QPI-PSL-201-F
  • QPI-PSL-201-G
  • QPI-PSL-201-H

Repair Services For QPI-PSL-201

Type Lead Time Price Action
Repair Service 1-2 weeks Ask Get Quote

Our highly skilled technicians can repair your QPI-PSL-201. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More