Product Description
QPH2D100L2P
This model of the QuickPanel Junior subcategory, which is a part of the QuickPanel touch screen lineup. This series was produced by General Electric and their industrial automation division. This series of human/machine interface modules are now regarded as obsolete, and are no longer being produced en masse. From us at AX Control, we have refurbished and optimized these products, and sell it to you with an extensive warranty coverage, and a guarantee to not be dead on arrival.
The QPH2D100L2P unit is a 6 inch touch screen panel, with the standard QuickPanel Junior dimensions: a width of 6.71 inches, a height of 5.43 inches, and a depth of 3.437 inches. This unit weighs just 1.5 pounds, or 0.86 kilograms. The viewing panel is built with a height of 4 inches, and a 5 inch width. The image resolution provided is in a 240 x 320 pixel setup. The model is outfitted with a thin film transistor, with a liquid crystal display. The image and informational graphics are presented in monochromatic tones of gray and white.
The QPH2D100L2P unit is powered by a nominal intake of 24 volts of direct current, though a minimum of 20.4 and a maximum of 27.6 V/DC are also acceptable amount of energy. The unit is insulated with 10 M, at 500 V/DC. It’s able to withstand a voltage intake of 1500 volts of alternating energy, and, should a power failure occur, then the power failure immunity kicks in, keeping the panel running for up to 20 milliseconds after the power source lapse.
