The IC300OCS200 is an Operator Control Station (OCS) that was originally created by GE Fanuc. GE is no longer maintaining this OCS and it may prove to be hard to locate. AX Control does attempt to keep this device in stock. Please consult the website for product details and availability for the IC300OCS200.
The IC300OCS200 is a Control Station main unit that was created to be a part of the GE Fanuc IC300 series. This OCS has an expanded 32-key keypad and 4x20 backlit LCD display. It has the ability to support a full ladder programming setup, a CsCAN network, and a total of 4 SmartStack I/O boards. This OCS is 228.6 mm wide, 180.9 mm tall, and 50.8 mm deep. When you add a SmartStack, it adds depth to the OCS’s physical dimensions. There is an RS-232 port on this OCS that you can use to make PC and modem connections. You should only operate this OCS in a 5-95% non-condensing humidity and in temperatures between 0-60 degrees Celsius.
The IC300OCS200 has an Intel processor that uses 64K of screen memory and 64k of logic memory. The processor has a scan rate of 0.7msec/K. The OCS can be connected to the CsCAN network. When that happens, the network has the ability to support up to 253 OCSs. It can do this over the distance of 2000 meters as long as you have 3 repeaters. The CsCAN also boasts speeds from 1mbaud to 125 kbaud.
|Type||Operator Control System|
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2020 - AX Control Inc. - All Rights Reserved