FRN015G9D-4XU

Product Description

The General Electric Fuji Electric FRN015G9D-4XU Transistor Inverter is part of the FRENIC series. FRN015G9D-4XU is classified as a high performance, multifunction inverter which has nominal applied motor that runs at 015 HP and a three-phase power supply voltage of 460V.

The FRN015G9D-4XU inverter is equipped with a keypad which has a five-digit, 7-segment LED monitor and an LCD monitor which display the inverter’s operation modes: Running mode, Programming mode, and Alarm mode. The 7-segment LED monitor displays such information as the output frequency, current, voltage, and alarm code, while the LCD monitor displays menus as wells as the function codes and their data.

The required input voltage for the FRN015G9D-4XU inverter is 380 to 480 V with a line frequency of 50/60 Hz. The inverter allows for a 10% increase or decrease in the voltage and a 5% increase or decrease in the frequency. The required capacity of the input range is 6.8 kVA; however, with DCR the required capacity of the input power is 9.9 kVA. The FRN015G9D-4XU inverter possesses an output rating for its nominal applied motor of 5 HP. Additionally, the inverter has a rated capacity of 9.5 kVA and a rated current of 12 A.

When in High Duty-mode for heavy loads, the FRN015G9D-4XU inverter has a built-in braking transistor and resistor, which apply a braking time of five seconds and a duty cycle of 2%ED.

The FRN015G9D-4XU weighs a total of 14 lbs. and its dimensions are 8.66 x 12.4 x 10.63 in inches.