6KAF343001M$A1

Product Description

The 6KAF343001M$A1 is from Fuji Electric. The 6KAF343001M$A1 is a part of the AF-300 Micro-$aver drives. This drive is only able to be used inside. Less than 1000 meters (3281 feet) in elevation. The drive must be kept out of direct sunlight and kept away from excessive dust and away from oil mist and corrosive gasses. The frequency range for this drive is 50 - 400 Hertz (0.2 to 15 Hz start frequency; 0 2 to 120 Hz base frequency). The torque boost for this drive ranges from 0 to 31 0 code setting (includes selection for variable torque load.). The deceleration and acceleration characteristics for this drive is 0 01 to 3600 seconds (Independent acceleration/deceleration) Alternative accel/decel time available as well as linear or 2 S-curves (selectable). The pitch of the sound produced by the motor can be changed to reduce irritating noise by changing the switching frequency (6 levels) (operating sound selection). The frequency meter adjustment is a Scale calibration of externally connected analog meter or pulse frequency 1440 Hz/F maximum. There are fifteen step preset speeds selectable by 3 contact closures and RT1. The maintained contact operation is Maintained contact operation/stop command (2-wire operation) for the terminal board. The frequency reference signal is controlled by a - Speed potentiometer/O to +I 0 Vdc and 4 to 20 mA [(0 to +5vdc) gain adjust O-200%]. Please refer to the AF-300 Micro-$aver drive instruction manual for additional specifications and instructions.

The staff at AX Control is available to provide a quote.